The prevalence of apical periodontitis in patients prior to hematopoietic cell transplantation: a systematic review.

Objectives: This systematic review addressed the question: "What is the prevalence of apical periodontitis in patients prior to hematopoietic cell transplantation?" Materials and Methods: A systematic search was conducted in MEDLINE/PubMed, Cochrane Library, Scopus, Web of Science, Embase, and Grey Literature Report. Eligibility criteria were based on the condition, content, and population strategy: the condition was the radiographic prevalence of apical periodontitis, the content comprised patients scheduled for hematopoietic stem cell transplantation, and the population consisted of adult and pediatric patients. The revised Risk of Bias in Nonrandomized Studies of Exposure tool was used to assess the quality of studies. The Grading Recommendations Assessments, Development, and Evaluation (GRADE) tool was used to assess the quality of evidence. Results: Eight studies were included in this review. The average number of patients with apical periodontitis was 15.65% (range, 2.1%-43.34%). One study was classified as having a very high risk of bias, 1 with a high risk of bias, and 6 with some concern for bias. GRADE analysis showed a very low certainty of evidence. Significant limitations concerning the absence of control over confounding variables were identified. Conclusions: With the caveat of the very low quality of evidence in the studies reviewed, there was a low to moderate prevalence of apical periodontitis in patients prior to undergoing hematopoietic cell transplantation.

EVALUATION OF INTRAOPERATIVE PAIN OCCURRENCE AND NEED FOR SUPPLEMENTAL ANESTHESIA DURING EMERGENCY DENTAL CARE

Aims: This study aimed to evaluate the intraoperative pain (IOP) occurrence in situations of symptomatic irreversible pulpitis (SIP) and symptomatic apical periodontitis (SAP). Materials and Methods: Patients who sought emergency care presenting a diagnosis of SIP or SAP were included. IOP was measured with a Visual Analogue Scale (VAS) after five minutes of local anesthesia, during access to the pulp chamber, root canal exploration and at the end of procedures. In cases where pain was reported during treatment, supplementary anesthesia was performed. Pain scores were recorded and analyzed using a generalized estimating equation model with posthoc comparisons. Results: 56 patients were included. 35 had a diagnosis of SIP; and 21 a diagnosis of SAP. Mean preoperative pain scores for SAP and SIP were 6.69 (±1.54) and 6.39 (±1.48), respectively (p>0.05). In patients with SIP, significant differences were observed between: preoperative scores and other time points; scores after five minutes of local anesthesia and other time points; scores during pulp chamber access and at the end of procedures; and scores during root canal exploration and at the end of procedures (p<0.05). In patients with SAP, significant differences were observed between preoperative pain scores with all other time points (p<0.05). Chi-square test indicated an association between diagnosis and the need for supplementary anesthesia (p<0.05). Conclusions: In conclusion, there is a strong relationship between reduction of moderate/severe pain after application of local anesthesia. The need for supplemental anesthesia is significantly associated to the diagnosis of symptomatic irreversible pulpitis.

ARE CALCIUM SILICATE SEALERS LESS CYTOTOXIC AND GENOTOXIC THAN EPOXY RESIN SEALERS? A SYSTEMATIC REVIEW OF IN VITRO STUDIES

Aims: This systematic review aimed to evaluate whether calcium silicate-based sealers are less cytotoxicity and genotoxicity than epoxy resin-based sealers. Materials and Methods: Systematic searches were conducted for studies published up to September 27th, 2022, without restriction for language or year of publication, in the following databases: MEDLINE/PubMed, Scopus, Web of Science and Grey Literature Report. Only in vitrostudies that evaluated the cytotoxicity or genotoxicity of calcium silicate and epoxy resin-based sealers were included. The quality assessment was performed. Results: After duplicate removal and eligibility criteria assessment, a total of thirty-four studies were included. Twenty-eight studies had a low risk of bias, and six studies had amoderate risk of bias. In general, calcium silicate-based sealers had a lower cytotoxic and genotoxic potential than epoxy-resin based sealers.Conclusions: Based on the findings from in vitrostudies, calcium silicate-based sealers are less cytotoxic andgenotoxic than epoxy resin-based sealers

POSTOPERATIVE PAIN INCIDENCE AND INTENSITY FOLLOWING ROOT CANAL OBTURATION WITH BIOCERAMIC AND OTHER SEALERS: A SYSTEMATIC REVIEW WITH META-ANALYSIS

Aims: To investigate whether bioceramicsealers induce a lower incidence and intensity of postoperative pain compared to other sealers. Materials and Methods: Six electronic databases were searched for studies published up to April 2022, following the PICOS strategy: (P) adult patients undergoing root canal treatment or retreatment; (I) root canal filling using bioceramic sealer; (C) root canal filling using other types of sealers; (O) Primary: postoperative pain incidence and/or intensity; Secondary: number of medication intake; (S) randomizedclinical trials. Risk of bias assessment was performed with the revised Cochrane risk of bias tools for randomized trials (RoB 2). Overall certainty of evidence was assessed through the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool. Results: Ten studies were included. Eight studies had a low risk of bias, and two had some concerns risk. Meta-analyses showed no differences regarding postoperative pain intensity and incidence between bioceramic sealers and AH Plus. Number of medication intake seemed to be associated to the preoperative diagnosis. Zinc oxide-eugenol sealer demonstrated an intense postoperative pain compared to bioceramic sealers and AH Plus. GRADE analysis showed a low certainty of evidence for all outcomes. Conclusions: There seem to be no differences between bioceramic sealers and AH Plus regarding postoperative pain intensity and incidence. Number of medication intake seem to be associated to the preoperative diagnosis. Zinc oxide-eugenol evoked a more pronounced postoperative pain.

Evaluation of cyclic and torsional fatigue resistance of several heat-treated reciprocating nickel-titanium instruments.

This study investigated the cyclic fatigue and torsional resistance of Unicone Plus (UCP 25.06), Unicone (UC 25.06), Reciproc Blue (RB 25.08) and Wave One Gold (WOG 25.07) performed at body temperature (35° ± 1°C). Time and number of cycles to fracture (NCF), as well as torque and angular deflection were recorded. Fractured surfaces were evaluated by scanning electron microscopy (SEM). Data were analysed using one-way ANOVA and Holm-Sidak's tests for multiple comparison. The RB had a significantly higher time to fracture, followed by the WOG and UCP (p < 0.05). Regarding the NCF, there was no significantly difference between RB and WOG (p > 0.05). UC presented highest torque values and the lowest angular deflection (p < 0.05). SEM analysis demonstrated typical failures features in both cyclic and torsional fatigue tests. Overall, UC had the lowest time, NCF and angular deflection at fracture. RB presented the highest time to fracture and angular deflection values.

Does the ultrasonic activation of calcium silicate-based sealers affect their physicochemical properties?

Abstract This study aimed to evaluate the influence of ultrasonic activation (UA) on the physicochemical properties of hydraulic calcium silicate-based sealers. Nine experimental conditions were created based on the hydraulic calcium silicate-based sealers (Bio-C Sealer, Sealer Plus BC and Bio Root RCS) and the ultrasonic activation (no activation [NA], 10 seconds, and 20 seconds). Then the experimental groups were BC-NA, BC-10, BC-20, SPBC-NA, SPBC-10, SPBC-20, BR-NA, BR-10, and BR-20. Activation was performed with an ultrasonic insert 20/.01. The mold for the physicochemical analysis was filled and evaluated according to the ANSI/ADA specification nº. 57: initial and final setting time, flow, radiopacity and solubility. Tests were also performed to evaluate pH and calcium ion release with experimental periods of 1, 24, 72, and 168 hours with a pH meter and colorimetric spectrophotometer. Data were analyzed by one-way analysis of variance and post-hoc Tukey tests. The significance level was set at 5%. The time of UA progressively delayed the initial setting time for all hydraulic calcium silicate-based sealers (p < 0.05). Twenty seconds of UA increased the mean flow values of Sealer Plus BC and Bio-C Sealer compared to NA (p < 0.05). UA did not influence the radiopacity and solubility of the tested sealers (p > 0.05). UA for 20 seconds enhanced the pH levels and the calcium ion release of Sealer Plus BC and Bio-C Sealer at 168h (p < 0.05). UA for twenty seconds interferes with some physicochemical properties of hydraulic calcium silicate-based sealers.

Resumo Este estudo teve como objetivo avaliar a influência da ativação ultrassônica nas propriedades físico-químicas de cimentos de silicato de cálcio. Nove condições experimentais foram criadas com base nos cimentos de silicato de cálcio (Bio-C Sealer, Sealer Plus BC e Bio Root RCS) e na ativação ultrassônica (sem ativação [SA], 10 segundos e 20 segundos). Os grupos experimentais foram BC-SA, BC-10, BC-20, SPBC-SA, SPBC-10, SPBC-20, BR-SA, BR-10 e BR-20. A ativação foi realizada com um inserto ultrassônico 20/.01. O molde para a análise físico-química foi preenchido e avaliado de acordo com a especificação ANSI/ADA nº. 57: tempo de presa inicial e final, escoamento, radiopacidade e solubilidade. Também foram realizados testes para avaliação de pH e liberação de íons cálcio com períodos experimentais de 1, 24, 72 e 168 horas com pHmetro e espectrofotômetro colorimétrico. Os dados foram analisados por análise de variância one-way e testes post-hoc de Tukey. O nível de significância foi estabelecido em 5%. O tempo de AU aumentou progressivamente o tempo de presa inicial para todos os cimentos de silicato de cálcio (p < 0,05). Vinte segundos de AU aumentaram os valores médios de escoamento de Sealer Plus BC e Bio-C Sealer em comparação com SA (P < 0,05). A AU não influenciou a radiopacidade e a solubilidade dos cimentos testados (P > 0,05). AU por 20 segundos aumentou os níveis de pH e a liberação de íons cálcio de Sealer Plus BC e Bio-C Sealer em 168h (P < 0,05). AU por vinte segundos interfere em algumas propriedades físico-químicas dos cimentos de silicato de cálcio.

Assessment of quality of life in total edentulous patients rehabilitated with implants and fixed prosthesis

Aim: Tooth loss is very prevalent in Brazil, reflecting high demand for dental services, especially those related to oral rehabilitation. This study aimed to assess the quality of life in total edentulous patients rehabilitated with implants and fixed prosthesis. Methods: Thirty-two patients were evaluated before and after rehabilitation with dental implants and fixed prosthesis using the OHIP-14 questionnaire and the Visual Analogue Scale (VAS) after 6 months follow-up. Results:OHIP-14 revealed a significant improvement after treatment in all seven parameters and in the global score (P < 0.001). VAS presented positive results related to patient satisfaction regarding oral rehabilitation, except for the hygiene of the fixed dentures. Conclusion: At the end of this study, OHIP-14 scores decreased by 50% in most of the questions raised, and VAS presented positive results, except for hygiene of the fixed dentures, presenting an improvement in the quality of life of total edentulous patients after rehabilitation with implants and fixed prosthesis

Effects of estrogen deficiency on the progression of apical periodontitis. A systematic review of preclinical studies.

BACKGROUND: To answer the review's question "Does estrogen deficiency influence on the progression of apical periodontitis?" METHODS: Systematic searches were performed in MEDLINE/PubMed, Cochrane Library, Scopus, Web of Science, EMBASE, and Grey Literature Report databases, without restriction for language or year of publication. The eligibility criteria were based on the PICOS strategy, as follows: (P) animals with estrogen deficiency; (I) induction of apical periodontitis; (C) animals without estrogen deficiency (control group or sham surgery); (O) bidimensional and/or tridimensional measures of apical periodontitis progression; (S) studies in animal models. Risk of bias was performed with SYRCLE Risk of Bias tool. Certainty of evidence was assessed with GRADE. RESULTS: In total, 12 studies were included according to eligibility criteria. All studies (100%) demonstrated that the estrogen deficiency influence the apical periodontitis progression. Most studies performed a histomorphometric analysis evaluating bone loss area (58.3%), radiographic bone loss area (41.7%), bone volume assessment with microcomputed tomography (25%), fluorescence microscopy lesion area in mm2 (16.7%), and radiographic density assessment in one study (8.3%). The most frequent period of analysis was 21 days after lesion induction (75%). GRADE assessment showed a moderate certainty of evidence. DISCUSSION: The included studies demonstrated several limitations regarding randomization, blinding and description of baseline characteristics. All studies showed that an hypoestrogenic condition can favor an increased progression of apical periodontitis. Further clinical studies are necessary to confirm this correlation. CONCLUSIONS: In animal models, the estrogen deficiency significantly impact on the progression of apical periodontitis generating larger lesions comparing to healthy sham animals.

Head and neck radiotherapy effects on the dental pulp vitality and response to sensitivity tests: A systematic review with meta-analysis.

BACKGROUND: Experimental studies are controversial regarding the effects of radiotherapy for head and neck cancer (HNC) on the dental pulp. Therefore, a systematic review of clinical studies is necessary to investigate whether alterations in pulp status occur. OBJECTIVES: To evaluate the evidence on radiotherapy for HNC and pulp status. METHODS: A systematic search of articles published until November 2021 was performed in the MEDLINE/PubMed, Cochrane Library, Web of Science (All Databases), Scopus, EMBASE, and Open Grey databases. The eligibility criteria were based on the PICOS strategy, as follows: (P) vital teeth of adult patients with intraoral and/or oropharyngeal cancer; (I) radiotherapy; (C) control group or values of the same tooth before radiotherapy (basal values); (O) pulpal status after radiotherapy; and (S) clinical studies. The Cochrane Risk of Bias in Nonrandomized Studies of Interventions tool was used to assess the quality of the included studies. Meta-analyses were performed using fixed and random effects. The overall quality of evidence was assessed through the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool. RESULTS: Six studies were included for qualitative analysis. Five were classified as serious risk of bias and one as moderate risk of bias. Four studies reported altered pulp responses to cold thermal tests after radiotherapy initiation. Meta-analyses were performed using three included studies. From these, all were included in the meta-analysis for pulp response values to cold sensitivity test immediately after radiotherapy initiation (risk ratio: 0.00 [CI: 0.00, 0.02], p < .00001; I2  = 0%); and two in the meta-analysis for pulp response values to cold sensitivity test after 4-5 months of radiotherapy (risk ratio: 0.01 [CI: 0.00. 0.06], p < .00001; I2  = 0%). Two reported progressively higher readings to pulp response in the electrical test after radiotherapy initiation (mean difference: -11.46 [-13.09, -9.84], p < .00001; I2  = 68%). Two studies demonstrated a pulp oxygen saturation (SpO2 ) decrease at the end of radiotherapy; and an increase after 4-6 months of radiotherapy beginning. And other demonstrated normal dental pulp SpO2 4-6 years after treatment. GRADE analysis presented a moderate certainty of evidence. DISCUSSION: This review verified that radiotherapy for HNC causes significant alterations on the dental pulp responses, but does not seem to induce pulp necrosis. Significant limitations regarding controlling for confounding factors, classification of interventions, and measurement of outcomes were verified, evidencing the need for well-designed studies. CONCLUSIONS: This systematic review demonstrated that radiotherapy for HNC induced significant changes in the pulp response with moderate quality of evidence. Such altered responses cannot determine pulp status accurately.

Evaluation of the dentinal tubule penetration of an endodontic bioceramic sealer after three final irrigation protocols

Introduction: This study aimed to evaluate the dentinal tubule penetration of an endodontic bioceramic sealer, Sealer Plus BC, after three final irrigation protocols. Methods: Thirty distobuccal roots of maxillary molars were selected. Root canal preparation was performed up to an #40.06 instrument (X1 Blue) under 2.5% sodium hypochlorite irrigation. Specimens were randomly divided into three groups (n=10), according to the final irrigation protocol: G-NaOCl (2.5% sodium hypochlorite + PUI), G-SS (0.9% saline solution + PUI) and G-H20 (Deionized water + PUI). After final irrigation protocols, all specimens were irrigated with phosphate buffer solution. Root canal obturation was performed using the single cone technique and Sealer Plus BC, stained with a specific fluorophore. Specimens were transversely sectioned and each root third was evaluated in a confocal scanning laser microscopy. Images obtained were analyzed for sealer penetration in the dentinal tubules. Results: Dentinal tubule penetration of Sealer Plus BC was not observed in any root third, regardless of the final irrigation protocol investigated. Conclusions: Sealer Plus BC dentinal tubule penetration was not observed after none of the protocols tested. Dentinal tubule penetrability of Sealer Plus BC may be related to other factors rather than the final irrigation protocol.

Effect of A Clinical-Replicable Cooling Protocol on the Cyclic Fatigue Resistance of Heat-Treated Nickel-Titanium Instruments.

Introduction: The aim of this study was to evaluate the bending and cyclic fatigue resistance of Wave One Gold (WOG) and X1 Blue (X1B) instruments when tested at body temperature (36°C ± 1°C) with and without subjected to an alloy cooling protocol. Materials and Methods: A total of sixty instruments (n=30) were tested. Forty instruments (n=20) were randomly selected and divided into two groups: body temperature (BT; n=20) and body temperature with cooling protocol (CP; n=20). Cyclic fatigue test was performed until fracture in a conventional stainless-steel device with water bath equipment to simulate body temperature. CP group instruments were subjected to 5 seconds of spray cooling every 30 seconds. Time to fracture was recorded in seconds. Resistance to bending at an angle of 45 degrees was evaluated using twenty instruments (n=10). Fractured surfaces were examined under scanning electron microscopy (SEM). Statistical analysis was performed at a 5% significance level. Results: There was no difference in the cyclic fatigue resistance between instruments in BT groups (P>0.05). Cooling protocol significantly increased the cyclic fatigue resistance of X1B instruments (P=0.0003) and WOG instruments (P=0.0003). Results: WOG instruments had a significantly lower cyclic fatigue resistance compared to X1B instruments in CP group (P=0.0001). There were no significant differences between the values of resistance increase presented by the instruments after cooling (P>0.05). Bending test presented no statistically significant differences between the tested instruments (P>0.05). Both instruments in both groups showed typical features of cyclic fatigue behavior under SEM. Conclusions: X1 Blue #25.06 and WaveOne Gold #25.07 instruments presented similar cyclic fatigue resistance. The investigated clinical-replicable cooling protocol improved the cyclic fatigue resistance of the tested instruments, with X1 Blue #25.06 presenting a greater cyclic fatigue resistance after cooling. Both instruments presented a similar bending capacity.

Evaluation of Torsional Resistance and Bending Stiffness of Coronal Flaring Nickel-Titanium Instruments.

OBJECTIVE: The aim of this study was to evaluate the bending and torsional resistance of the following instruments: Mtwo 25/.07 (MT - VDW, Munich, Germany), Navigator W-XN 25.07 (WXN - Wizard Navigator, Medin, Nové Mesto na Morave, Czech Republic), ProTaper Universal SX 19/.04 (PSX - Dentsply Tulsa Dental Specialties, Tulsa, USA), MK Orifice Shapper 17/.08 (OS - MK Life Medical and Dental Products, Porto Alegre, Brazil) and MK Sequence 17.12 (MKS - MK Life Medical and Dental Products, Porto Alegre, Brazil). METHODS: One hundred instruments were used (n=20). Resistance to bending (n=10), torque and angular deflection (n=10) at the failure of new instruments were measured according to ISO 3630-1. Metal mass volume at 3 mm from the tip was evaluated using micro-computed tomography (micro-CT). The fractured surface of each fragment was examined by scanning electron microscopy (SEM). Data were analysed using 1-way analysis of variance and Tukey tests. RESULTS: Torsional resistance values of MK Sequence were higher than the other groups (P<0.05). No differences were observed among MT, WXN and OS (P>0.05) and PTS, which presented the lowest values (P<0.05). MT showed the highest angular deflection (P<0.05). WXN and PSX presented no significant difference (P>0.05). PSX and OS also showed no significant differences (P>0.05). MKS instruments had the lowest angular deflection values (P<0.05). There were significant differences among all the groups in bending stiffness test (P<0.05), but PSX had the lowest torque to bend (P<0.05). MKS had the larger metal mass volume at 3 mm from the tip (P<0.05). SEM analysis showed similar and typical features of torsional failure for all instruments tested. CONCLUSION: In conclusion, MK Sequence 17/.12 had the highest torsional fracture resistance. Mtwo 25/.07 showed higher angular deflection capacity, and ProTaper Universal SX the 19/.04 lower bending stiffness.

Successful revascularization procedure in an immature permanent necrotic second lower molar: a case report with 4. 5- years follow- up

Background: Infection control is mandatory for revascularization procedures, enabling to eliminate patient's clinical symptoms and signs. Despite presenting a complex morphology when compared to anterior teeth, if a strict disinfection protocol is adopted and the revascularization procedure's biological principles are followed, the therapy can be successful in molar teeth. Methods: This case report aims to present a clinical case of successful revascularization in an immature permanent necrotic second lower molar. Clinical decisions and explanations regarding possible mechanisms related to the treatment's success in a tooth with complex morphology are discussed. Results: Revascularization procedures were performed on a 12-year-old male patient diagnosed with symptomatic periapical periodontitis in a tooth 37. The case highlights the need for infection control and biological principles that surrounds the success of this therapy. Follow-up times presented in this case were six months, 1, 2, 4 and 4.5-years, respectively. Continued root development was observed, and the tooth remains intact and without symptoms. Conclusion: The association of infection control and the biological principles of revascularization procedures allow the maintenance and continuation of tooth development, even when these present complex morphologies.

Evaluation of the impact of pain from dental urgencies on the patients' oral health- related quality of life: a cross- sectional study

Background. This cross-sectional study aimed to evaluate the impact of pain from dental urgencies on the oral health-related quality of life (OHRQoL). Methods. A sample of sixty-eight patients seeking urgent attention to a primary health unit were included. Clinical diagnosis and sociodemographic data were assessed, dental pain measured by visual analog scale (VAS) and numerical pain rating scale (NPRS). The Oral Health Impact Profile-14 (OHIP-14) instrument was used to measure the OHRQoL. Associations were analyzed using the Student t-test, except for types of urgencies, that were evaluated with one-way analysis of variance (ANOVA) test. Results. The most prevalent urgency type was of endodontic origin (81%). There was no difference between pain and other variables. The type of tooth showed significant differences in OHIP-14 scores. Conclusion. Dental urgencies were associated with a high level of pain and impacted negatively on the patients' OHRQoL. The type of tooth had a positive association the OHRQoL measures.

Evaluation of the mechanical properties of different nickel-titanium retreatment instruments.

This study investigated the cyclic fatigue, bending, torsional resistance and angular deflection of Pro-R 25.08, Logic RT 25.08, MK Retreatment 25.08 (MK RT) and ProTaper Retreatment D2 instruments. Cyclic fatigue test was performed until fracture in a custom stainless-steel device with water bath equipment to simulate body temperature. Fracture time was recorded. A number of cycles were calculated. Resistance to bending at 45°, torsional resistance and angular deflection were evaluated. The fracture surfaces were examined by scanning electron microscopy. Statistical analysis was performed with one-way ANOVA and Tukey and Kruskal-Wallis and Dunn tests. Pro-R and Logic RT presented the highest cyclic fatigue (P < 0.05). D2 had higher strength to bend than Pro-R and Logic RT (P < 0.05). Logic RT showed the highest torque and angular deflection (P < 0.05), without differences when compared to D2 (P > 0.05). Instrument performances were dependent on their geometrical features and heat treatments.