Ionomer Membranes Produced from Hexaarylbenzene-Based Partially Fluorinated Poly(arylene ether) Blends for Proton Exchange Membrane Fuel Cells.

In this study, a series of high molecular weight ionomers of hexaarylbenzene- and fluorene-based poly(arylene ether)s were synthesized conveniently through condensation and post-sulfonation modification. The use a of blending method might increase the stacking density of chains and affect the formation both of interchain and intrachain proton transfer clusters. Multiscale phase separation caused by the dissolution and compatibility differences of blend ionomer in high-boiling-point solvents was examined through analysis and simulations. The blend membranes produced in this study exhibited a high proton conductivity of 206.4 mS cm−1 at 80 °C (increased from 182.6 mS cm−1 for precursor membranes), excellent thermal resistance (decomposition temperature > 200 °C), and suitable mechanical properties with a tensile strength of 73.8−77.4 MPa. As a proton exchange membrane for fuel cell applications, it exhibits an excellent power efficiency of approximately 1.3 W cm−2. Thus, the ionomer membranes have strong potential for use in proton exchange membrane fuel cells and other electrochemical applications.

Highly Proton-Conducting Membranes Based on Poly(arylene ether)s with Densely Sulfonated and Partially Fluorinated Multiphenyl for Fuel Cell Applications.

Series of partially fluorinated sulfonated poly(arylene ether)s were synthesized through nucleophilic substitution polycondensation from three types of diols and superhydrophobic tetra-trifluoromethyl-substituted difluoro monomers with postsulfonation to obtain densely sulfonated ionomers. The membranes had similar ion exchange capacities of 2.92 ± 0.20 mmol g-1 and favorable mechanical properties (Young's moduli of 1.60-1.83 GPa). The membranes exhibited considerable dimensional stability (43.1-122.3% change in area and 42.1-61.5% change in thickness at 80 °C) and oxidative stability (~55.5%). The proton conductivity of the membranes, higher (174.3-301.8 mS cm-1) than that of Nafion 211 (123.8 mS cm-1), was the percent conducting volume corresponding to the water uptake. The membranes were observed to comprise isolated to tailed ionic clusters of size 15-45 nm and 3-8 nm, respectively, in transmission electron microscopy images. A fuel cell containing one such material exhibited high single-cell performance-a maximum power density of 1.32 W cm2 and current density of >1600 mA cm-2 at 0.6 V. The results indicate that the material is a candidate for proton exchange membranes in fuel cell applications.

Real-Time and Sensitive Immunosensor for Label-Free Detection of Specific Antigen with a Comb of Microchannel Long-Period Fiber Grating.

This study aimed to develop a comb of microchannel and immunosensor based on long-period fiber grating using the process of Lithographie Galvanoformung Abformung-like micro-electromechanical systems (LIGA-like MEMS) for real-time and label-free detection of specific antigen. The coupling between propagating core and cladding modes was conducted from the comb of microchannel long-period fiber grating (CM-LPFG). The CM-LPFG-based immunosensor consisted of a microchannel structure through photoresist stacking processes and was sandwiched with an optical fiber to obtain a long-period structure. Specific immunoglobulin against protein antigen was immobilized onto an optical fiber surface and produced a real-time resonance effect on sensing specific protein antigen from the extracted protein mixtures of the cancer cell lines. The variable transmission loss was -14.07 dB, and the resonant wavelength shift was 11.239 nm. The low limit of detection for total protein concentration was 1.363 ng/µL. Our results revealed that the CM-LPFG-based immnosensor for real-time detection of label-free protein antigen is feasible and sensitive based on the diversification of a transmission loss and achieves specific immunosensing purposes for lab-on-fiber technology.

A Lamping U-Shaped Fiber Biosensor Detector for MicroRNA.

This study presents a U-shaped optical fiber developed for a facile application of microRNA detection. It is fabricated by the lamping process and packaged in a quartz tube to eliminate human negligence. In addition, silanization and electrostatic self-assembly are employed to bind gold nanoparticles and miRNA-133a probe onto the silicon dioxide of the fiber surface. For Mahlavu of hepatocellular carcinoma (HCC), detection is determined by the wavelength shift and transmission loss of a U-shaped optical fiber biosensor. The spectral sensitivity of wavelength and their coefficient of determination are found at -218.319 nm/ ng/mL and 0.839, respectively. Concurrently, the sensitivity of transmission loss and their coefficient of determination are found at 162.394 dB/ ng/mL and 0.984, respectively. A method for estimating the limit of detection of Mahlavu is at 0.0133 ng/mL. The results show that the proposed U-shaped biosensor is highly specific to miRNA-133a and possesses good sensitivity to variations in specimen concentration. As such, it could be of substantial value in microRNA detection.