Temporomandibular Joint Acoustic Emissions in Children With Juvenile Idiopathic Arthritis Differ From Those in Healthy Children.

PURPOSE: Articulation of the temporomandibular joint (TMJ) generates sounds with specific characteristics known as joint acoustic emissions (AEs). The purpose of this project was to determine if AEs as described by the joint health score (JHS) in children with juvenile idiopathic arthritis (JIA) differ from AEs in healthy children. METHODS: The investigators implemented a cross-sectional study with age- and sex-matched controls to compare AEs from 4 groups: (1) healthy subjects without TMJ sounds, (2) healthy subjects with TMJ sounds, (3) subjects with JIA without TMJ sounds, and (4) subjects with TMJ sounds. Predictor variables were JIA status (ie JIA/healthy) and joint sounds (present/absent). The outcome variable was AEs. Subjects wore a specialized headset and performed specific jaw movements that generated AEs. AEs were recorded and analyzed using an aggregated decision tree classification model that calculates a JHS for each group. JHSs were compared using a receiver operating characteristic curve and classification accuracies. The study team used a 2-tailed unpaired t-test to determine if score distributions were different. Significance was P < .05. RESULTS: A total of 51 subjects (102 TMJs; 37 females) with an average age of 13.1 years (range, 7 to 18) participated. Children with JIA and TMJ sounds had AEs with large repetitive clicks. Children with JIA without sounds had smaller repetitive clicks. Healthy children had grinding sounds with lower amplitude. The receiver operating characteristic curve had a classification accuracy of 71.6%. This accuracy compares against the gold standard clinical assessment for placing these patients into their groups (JIA vs healthy). JHSs of children with TMJ sounds and children with JIA and TMJ sounds were statistically significant (P < .0001). CONCLUSION: In our sample, the AE of TMJs in healthy children may be different than that in children with JIA. Assessment of an AE is a promising and noninvasive technique to determine involvement of TMJs in children with JIA.

Vibration Stimulation as a Non-Invasive Approach to Monitor the Severity of Meniscus Tears.

Musculoskeletal disorders and injuries are one of the most prevalent medical conditions across age groups. Due to a high load-bearing function, the knee is particularly susceptible to injuries such as meniscus tears. Imaging techniques are commonly used to assess meniscus injuries, though this approach suffers from limitations including high cost, need for skilled personnel, and confinement to laboratory or clinical settings. Vibration-based structural monitoring methods in the form of acoustic emission analysis and vibration stimulation have the potential to address the limits associated with current diagnostic technologies. In this study, an active vibration measurement technique is employed to investigate the presence and severity of meniscus tear in cadaver limbs. In a highly controlled ex vivo experimental design, a series of cadaver knees (n =6) were evaluated under an external vibration, and the frequency response of the joint was analyzed to differentiate the intact and affected samples. Four stages of knee integrity were considered: baseline, sham surgery, meniscus tear, and meniscectomy. Analyzing the frequency response of injured legs showed significant changes compared to the baseline and sham stages at selected frequency bandwidths. Furthermore, a qualitative analytical model of the knee was developed based on the Euler-Bernoulli beam theory representing the meniscus tear as a change in the local stiffness of the system. Similar trends in frequency response modulation were observed in the experimental results and analytical model. These findings serve as a foundation for further development of wearable devices for detection and grading of meniscus tear and for improving our understanding of the physiological effects of injuries on the vibration characteristics of the knee. Such systems can also aid in quantifying rehabilitation progress following reconstructive surgery and / or during physical therapy.

Acoustic Emissions as a Non-invasive Biomarker of the Structural Health of the Knee.

The longitudinal assessment of joint health is a long-standing issue in the management of musculoskeletal injuries. The acoustic emissions (AEs) produced by joint articulation could serve as a biomarker for joint health assessment, but their use has been limited by a lack of mechanistic understanding of their creation. In this paper, we investigate that mechanism using an injury model in human lower-limb cadavers, and relate AEs to joint kinematics. Using our custom joint sound recording system, we recorded the AEs from nine cadaver legs in four stages: at baseline, after a sham surgery, after a meniscus tear, and post-meniscectomy. We compare the resulting AEs using their b-values. We then compare joint anatomy/kinematics to the AEs using the X-ray reconstruction of moving morphology (XROMM) technique. After the meniscus tear the number and amplitude of the AE peaks greatly increased from baseline and sham (b-value = 1.33 ± 0.15; p < 0.05). The XROMM analysis showed a close correlation between the minimal inter-joint distances (0.251 ± 0.082 cm during extension, 0.265 ± .003 during flexion, at 145°) and a large increase in the AEs. This work provides key insight into the nature of joint AEs, and details a novel technique and analysis for recording and interpreting these biosignals.

High-strength, surface-porous polyether-ether-ketone for load-bearing orthopedic implants.

Despite its widespread clinical use in load-bearing orthopedic implants, polyether-ether-ketone (PEEK) is often associated with poor osseointegration. In this study, a surface-porous PEEK material (PEEK-SP) was created using a melt extrusion technique. The porous layer was 399.6±63.3 µm thick and possessed a mean pore size of 279.9±31.6 µm, strut spacing of 186.8±55.5 µm, porosity of 67.3±3.1% and interconnectivity of 99.9±0.1%. Monotonic tensile tests showed that PEEK-SP preserved 73.9% of the strength (71.06±2.17 MPa) and 73.4% of the elastic modulus (2.45±0.31 GPa) of as-received, injection-molded PEEK. PEEK-SP further demonstrated a fatigue strength of 60.0 MPa at one million cycles, preserving 73.4% of the fatigue resistance of injection-molded PEEK. Interfacial shear testing showed the pore layer shear strength to be 23.96±2.26 MPa. An osseointegration model in the rat revealed substantial bone formation within the pore layer at 6 and 12 weeks via microcomputed tomography and histological evaluation. Ingrown bone was more closely apposed to the pore wall and fibrous tissue growth was reduced in PEEK-SP when compared to non-porous PEEK controls. These results indicate that PEEK-SP could provide improved osseointegration while maintaining the structural integrity necessary for load-bearing orthopedic applications.