Preparation and Characterization of Acrylonitrile Butadiene Rubber Reinforced with Bio-Hydroxyapatite from Fish Scale.

This work aims to enhance the mechanical properties, oil resistance, and thermal properties of acrylonitrile butadiene rubber (NBR) by using the Nile tilapia fish scales as a filler and using bis(triethoxysilylpropyl)tetrasulfide (TESPT) as a coupling agent (CA). The prepared fish scale particles (FSp) are B-type hydroxyapatite and the particle shape is rod-like. The filled NBR with FSp at 10 phr increased tensile strength up to 180% (4.56 ± 0.48 MPa), reduced oil absorption up to 155%, and increased the decomposition temperature up to 4 °C, relative to the unfilled NBR. The addition of CA into filled NBR with FSp at 10 phr increased tensile strength up to 123% (5.62 ± 0.42 MPa) and percentage of elongation at break up to 122% relative to the filled NBR with FSp at 10 phr. This work demonstrated that the prepared FSp from the Nile tilapia fish scales can be used as a reinforcement filler to enhance the NBR properties for use in many high-performance applications.

Comparative Properties of K/NaX and K/NaY from Ultrasound-Assisted Impregnation and Performance in Transesterification of Palm Oil.

This work aims to compare physicochemical properties and catalytic performance of potassium supported on zeolite NaX and NaY (K/NaX and K/NaY, respectively) prepared by ultrasound-assisted impregnation from potassium acetate buffer precursor. Calcination converts the potassium precursor to carbonate, which occupies the zeolite cavities and disperses on the external surface. Both calcined samples show a decrease in zeolite phases, BET surface areas, and pore volumes. With the smaller changes, K/NaX is more stable than K/NaY. Moreover, K/NaX has higher basicity than K/NaY and is more active in the decomposition of 2-methylbut-3-yn-2-ol (MBOH), producing dominant products from basic sites. Both K/NaX and K/NaY are active in the transesterification of palm oil, producing more than 94% of the biodiesel yields in the first run. However, the yields drop in the second run because of the leaching of potassium species into glycerol and biodiesel products. The spent K/NaX has a similar phase to the fresh one, whereas the spent K/NaY shows more structure collapse. With better structural stability, less potassium leaching, and less decline in biodiesel yields in the second run, K/NaX is a better catalyst than K/NaY.

Active targeted ligand-aza-BODIPY conjugate for near-infrared photodynamic therapy in melanoma.

Active targeting compound, a non-iodinated derivative of IK-IK-I2-azaBODIPY (1a) was previously reported to preferentially bind melanoma over healthy cells. In this study, we evaluate the photodynamic therapy (PDT) efficiency on melanoma cells of 1a, together with its reversed sequence compound KI-KI-I2-azaBODIPY (1b) and a non-targeted control I2-azaBODIPY-NH2 (2). All three test compounds possess absorption wavelengths in the near-infrared (NIR) region (λmax between 678 and 687 nm) which alleviate melanin interference and allow deeper tissue penetration. In vitro studies revealed 1a and 1b are promising photosensitizers with enhanced singlet oxygen generation, have increased uptake by B16-F10 melanoma cells via clathrin-mediated endocytosis and good photocytotoxic efficacies. Ex vivo biodistribution assays showed both 1a and 1b accumulated in the tumour. In B16-F10 tumour bearing-C57BL/6 mice, 10 mg/kg of 1b and light irradiation was found to reduce tumour volume by up to 23% at day-3. Doubling the dosage of 1b (20 mg/kg) enhanced the antitumour effect, showing 96% maximum tumour volume reduction at day-7 and tumour growth suppression for up to 12 days.

Characterization of platinum-iron catalysts supported on MCM-41 synthesized with rice husk silica and their performance for phenol hydroxylation.

Mesoporous material RH-MCM-41 was synthesized with rice husk silica by a hydrothermal method. It was used as a support for bimetallic platinum-iron catalysts Pt-Fe/RH-MCM-41 for phenol hydroxylation. The catalysts were prepared by co-impregnation with Pt and Fe at amounts of 0.5 and 5.0 wt.%, respectively. The RH-MCM-41 structure in the catalysts was studied with x-ray diffraction, and their surface areas were determined by nitrogen adsorption. The oxidation number of Fe supported on RH-MCM-41 was + 3, as determined by x-ray absorption near edge structure (XANES) analysis. Transmission electron microscopy (TEM) images of all the catalysts displayed well-ordered structures, and metal nanoparticles were observed in some catalysts. All the catalysts were active for phenol hydroxylation using H2O2 as the oxidant at phenol : H2O2 mole ratios of 2 : 1, 2 : 2, 2 : 3 and 2 : 4. The first three ratios produced only catechol and hydroquinone, whereas the 2 : 4 ratio also produced benzoquinone. The 2 : 3 ratio gave the highest phenol conversion of 47% at 70 °C. The catalyst prepared by co-impregnation with Pt and Fe was more active than that prepared using a physical mixture of Pt/RH-MCM-41 and Fe/RH-MCM-41.

Pt3Ru6 clusters supported on gamma-Al2O3: synthesis from Pt3Ru6(CO)21(mu3-H)(mu-H)3, structural characterization, and catalysis of ethylene hydrogenation and n-butane hydrogenolysis.

The supported clusters Pt-Ru/gamma-Al2O3 were prepared by adsorption of the bimetallic precursor Pt3Ru6(CO)21(mu3-H)(mu-H)3 from CH2Cl2 solution onto gamma-Al2O3 followed by decarbonylation in He at 300 degrees C. The resultant supported clusters were characterized by infrared (IR) and extended X-ray absorption fine structure (EXAFS) spectroscopies and as catalysts for ethylene hydrogenation and n-butane hydrogenolysis. After adsorption, the nu(CO) peaks characterizing the precursor shifted to lower wavenumbers, and some of the hydroxyl bands of the support disappeared or changed, indicating that the CO ligands of the precursor interacted with support hydroxyl groups. The EXAFS results show that the metal core of the precursor remained essentially unchanged upon adsorption, but there were distortions of the metal core indicated by changes in the metal-metal distances. After decarbonylation of the supported clusters, the EXAFS data indicated that Pt and Ru atoms interacted with support oxygen atoms and that about half of the Pt-Ru bonds were maintained, with the composition of the metal frame remaining almost unchanged. The decarbonylated supported bimetallic clusters reported here are the first having essentially the same metal core composition as that of a precursor metal carbonyl, and they appear to be the best-defined supported bimetallic clusters. The material was found to be an active catalyst for ethylene hydrogenation and n-butane hydrogenolysis under conditions mild enough to prevent substantial cluster disruption.