Efficient industrial-current-density acetylene to polymer-grade ethylene via hydrogen-localization transfer over fluorine-modified copper.

Electrocatalytic acetylene semi-hydrogenation to ethylene powered by renewable electricity represents a sustainable pathway, but the inadequate current density and single-pass yield greatly impedes the production efficiency and industrial application. Herein, we develop a F-modified Cu catalyst that shows an industrial partial current density up to 0.76 A cm-2 with an ethylene Faradic efficiency surpass 90%, and the maximum single-pass yield reaches a notable 78.5%. Furthermore, the Cu-F showcase the capability to directly convert acetylene into polymer-grade ethylene in a tandem flow cell, almost no acetylene residual in the production. Combined characterizations and calculations reveal that the Cuδ+ (near fluorine) enhances the water dissociation, and the generated active hydrogen are immediately transferred to Cu0 (away from fluorine) and react with the locally adsorbed acetylene. Therefore, the hydrogen evolution reaction is surpassed and the overall acetylene semi-hydrogenation performance is boosted. Our findings provide new opportunity towards rational design of catalysts for large-scale electrosynthesis of ethylene and other important industrial raw.

Enhancing Catalytic Activity of a Nickel Single Atom Enzyme by Polynary Heteroatom Doping for Ferroptosis-Based Tumor Therapy.

As a rising generation of nanozymes, single atom enzymes show significant promise for cancer therapy, due to their maximum atom utilization efficiency and well-defined electronic structures. However, it remains a tremendous challenge to precisely produce a heteroatom-doped single atom enzyme with an expected coordination environment. Herein, we develop an anion exchange strategy for precisely controlled production of an edge-rich sulfur (S)- and nitrogen (N)-decorated nickel single atom enzyme (S-N/Ni PSAE). In particular, sulfurized S-N/Ni PSAE exhibits stronger peroxidase-like and glutathione oxidase-like activities than the nitrogen-monodoped nickel single atom enzyme, which is attributed to the vacancies and defective sites of sulfurized nitrogen atoms. Moreover, both in vitro and in vivo results demonstrate that, compared with nitrogen-monodoped N/Ni PSAE, sulfurized S-N/Ni PSAE more effectively triggers ferroptosis of tumor cells via inactivating glutathione peroxidase 4 and inducing lipid peroxidation. This study highlights the enhanced catalytic efficacy of a polynary heteroatom-doped single atom enzyme for ferroptosis-based cancer therapy.

Solid Migration to Assemble a Flower-like Nanozyme with Highly Dense Single Copper Sites for Specific Phenol Oxidation.

Nanozymes with high catalytic stability and sustainability have emerged as powerful competitors to natural enzymes for diverse biocatalytic applications. However, constructing a nanozyme with high specificity is one of their biggest challenges. Herein, we develop a facile solid migration strategy to access a flower-like single copper site nanozyme (Cu SSN) via direct transformation of copper foam activated by 2-methylimidazole. With highly clustered CuN3 sites whose local structure is similar to that of natural polyphenol oxidase, the Cu SSN exhibits excellent activity and specificity to oxidize phenols without peroxidase-like activity. Furthermore, the Cu SSN shows high sensitivity in the colorimetric detection of epinephrine with a low detection limit of 0.10 µg mL-1, exceeding that of most previously reported enzyme-mimicking catalysts. This work not only provides a simple method for the large-scale preparation of high-performance nanozymes but also offers an inspiration for the design of highly specific nanozymes by mimicking the synergy among sites in natural enzymes.

Precise Regulation of Iron Spin States in Single FeN4 Sites for Efficient Peroxidase-Mimicking Catalysis.

The catalytic activity and selectivity of single-atom sites catalysts is strongly dependent on the supports structure and central metal coordination environment. However, the further optimization of electronic configuration to improve the catalytic performance is usually hampered by the strong coordination effect between the support and metal atoms. Herein, it is discovered that enzyme-mimicking catalytic performance can be enhanced at the fixed coordination single-atom Fe sites by regulating the Fe spin states. The X-ray absorption fine structure, 57 Fe Mössbauer spectrum, and temperature-dependent magnetization measurements reveal that the spin states of Fe in single FeN4  sites can be well manipulated via changing the pyrolysis temperature. The intermediate-spin Fe sites catalyst (t2g 4 eg 1) demonstrates a much higher peroxidase-mimicking activity in comparison with high-spin structure (t2g 3 eg 2). More importantly, the based enzymes system realizes sensitive detection of H2 O2  and glucose by colorimetric sensors with high catalytic activity and selectivity. Furthermore, theoretical calculations unveil that the intermediate-spin FeN4  promotes the OH* desorption process, thus greatly reducing the reaction energy barrier. These findings provide a route to design highly active enzyme-mimicking catalysts and an engineering approach for regulating spin states of metal sites to enhance their catalytic performance.

Biocompatible Ruthenium Single-Atom Catalyst for Cascade Enzyme-Mimicking Therapy.

Rationally constructing single-atom enzymes (SAEs) with superior activity, robust stability, and good biocompatibility is crucial for tumor therapy but still remains a substantial challenge. In this work, we adopt biocompatible carbon dots as the carrier material to load Ru single atoms, achieving Ru SAEs with superior multiple enzyme-like activity and stability. Ru SAEs behave as oxidase, peroxidase, and glutathione oxidase mimics to synchronously catalyze the generation of reactive oxygen species (ROS) and the depletion of glutathione, thus amplifying the ROS damage and finally causing the death of cancer cells. Notably, Ru SAEs exhibit excellent peroxidase-like activity with a specific activity of 7.5 U/mg, which surpasses most of the reported SAEs and is 20 times higher than that of Ru/C. Theoretical results reveal that the electrons of the Ru 4d orbital in Ru SAEs are transferred to O atoms in H2O2 and then efficiently activate H2O2 to produce •OH. Our work may provide some inspiration for the design of SAEs for cancer therapy.

Compressive Strain Modulation of Single Iron Sites on Helical Carbon Support Boosts Electrocatalytic Oxygen Reduction.

Designing and modulating the local structure of metal sites is the key to gain the unique selectivity and high activity of single metal site catalysts. Herein, we report strain engineering of curved single atomic iron-nitrogen sites to boost electrocatalytic activity. First, a helical carbon structure with abundant high-curvature surface is realized by carbonization of helical polypyrrole that is templated from self-assembled chiral surfactants. The high-curvature surface introduces compressive strain on the supported Fe-N4 sites. Consequently, the curved Fe-N4 sites with 1.5 % compressed Fe-N bonds exhibit downshifted d-band center than the planar sites. Such a change can weaken the bonding strength between the oxygenated intermediates and metal sites, resulting a much smaller energy barrier for oxygen reduction. Catalytic tests further demonstrate that a kinetic current density of 7.922 mA cm-2 at 0.9 V vs. RHE is obtained in alkaline media for curved Fe-N4 sites, which is 31 times higher than that for planar ones. Our findings shed light on modulating the local three-dimensional structure of single metal sites and boosting the catalytic activity via strain engineering.

Stimuli-Responsive Manganese Single-Atom Nanozyme for Tumor Therapy via Integrated Cascade Reactions.

The single-atom enzyme (SAE) is a novel type of nanozyme that exhibits extraordinary catalytic activity. Here, we constructed a PEGylated manganese-based SAE (Mn/PSAE) by coordination of single-atom manganese to nitrogen atoms in hollow zeolitic imidazolate frameworks. Mn/PSAE catalyzes the conversion of cellular H2 O2 to . OH through a Fenton-like reaction; it also promotes the decomposition of H2 O2 to O2 and continuously catalyzes the conversion of O2 to cytotoxic . O2- via oxidase-like activity. The catalytic activity of Mn/PSAE is more pronounced in the weak acidic tumor environment; therefore, these cascade reactions enable the sufficient generation of reactive oxygen species (ROS) and effectively kill tumor cells. The prominent photothermal conversion property of the amorphous carbon can be utilized for photothermal therapy. Hence, Mn/PSAE exhibits significant therapeutic efficacy through tumor microenvironment stimulated generation of multiple ROS and photothermal activity.

Randomised control trial on the optimal duration of non-weight-bearing walking after hallux valgus surgery.

INTRODUCTION: Hallux valgus surgery is one of the most commonly performed operations in Orthopaedics. Multiple surgical techniques have been described including arthrodesis, osteotomies and soft tissue procedures. The endoscopic-assisted distal soft tissue procedure is one of the minimally invasive surgical options with a good long-term outcome. The rehabilitation protocol for this soft tissue procedure consists of 6-weeks of non-weight bearing walking. This prolonged period of non-weight-bearing walking may ensure a good stabilization of the alignment but is difficult for the patient from a social-economical perspective. In addition, earlier mobilisation has other theoretical advantages including less atrophy and better range of motion. The objective of this trial is to investigate the effect of an earlier weight-bearing regime at 2-weeks post-surgery. METHODS: Randomised control trial of patients undergoing the endoscopic-assisted distal soft tissue procedure. Allocation and randomization of subjects were performed immediately after completion of surgery to avoid intra-operative biases. The control group underwent the usual protocol of 6-weeks of non-weight-bearing walking while the intervention group underwent 2-weeks of post-operative non-weight-bearing walking. Foot function was measured using the Foot and Ankle Outcome Score (FAOS) at the baseline, 12-week post-surgery and 26-weeks post-surgery. The hallux valgus angle, 1,2 inter-metatarsal angle and tibial sesamoid position were also measured during those time-points. RESULTS: A total of 51 participants completed the study, 29 in the control group and 22 in the early weight-bearing group. 1 patient form the early weight-bearing group was complicated with hallux varus requiring revision surgery. All the patients had significantly improved radiological angles and foot function in both the control and early weight-bearing group. At the 12-week time point, the radiological angles were the same for both groups but foot function was significantly better in the early weightbearing group. DISCUSSION: Early postoperative weight-bearing did not lead to pre-mature implant failures or increased recurrence rates. It actually resulted in fewer symptoms like stiffness, lessened pain, better performance in daily activities and a better quality of life. CONCLUSION: Early weight-bearing walking at 2-week after distal soft tissue reconstruction of hallux valgus is not only safe, it may help accelerate the rehabilitation process and allow patients to return their usual life faster.The translational potential of this article: Being a clinical trial, our results are directly translatable to hallux valgus patients. The results of this study show that a shortened non-weight bearing duration after hallux valgus surgery improves foot function at 12 weeks while not affecting recurrence risks.

Cation-Exchange Induced Precise Regulation of Single Copper Site Triggers Room-Temperature Oxidation of Benzene.

The controllable synthesis of stable single-metal site catalysts with an expected coordination environment for high catalytic activity and selectivity is still challenging. Here, we propose a cation-exchange strategy for precise production of an edge-rich sulfur (S) and nitrogen (N) dual-decorated single-metal (M) site catalysts (M = Cu, Pt, Pd, etc.) library. Our strategy relies on the anionic frameworks of sulfides and N-rich polymer shell to generate abundant S and N defects during high-temperature annealing, further facilitating the stabilization of exchanged metal species with atomic dispersion and excellent accessibility. This process was traced by in situ transmission electron microscopy, during which no metal aggregates were observed. Both experiments and theoretical results reveal the precisely obtained S, N dual-decorated Cu sites exhibit a high activity and low reaction energy barrier in catalytic hydroxylation of benzene at room temperature. These findings provide a route to controllably produce stable single-metal site catalysts and an engineering approach for regulating the central metal to improve catalytic performance.

Single Iron Site Nanozyme for Ultrasensitive Glucose Detection.

Nanomaterials with enzyme-mimicking characteristics have engaged great awareness in various fields owing to their comparative low cost, high stability, and large-scale preparation. However, the wide application of nanozymes is seriously restricted by the relatively low catalytic activity and poor specificity, primarily because of the inhomogeneous catalytic sites and unclear catalytic mechanisms. Herein, a support-sacrificed strategy is demonstrated to prepare a single iron site nanozyme (Fe SSN) dispersed on the porous N-doped carbon. With well-defined coordination structure and high density of active sites, the Fe SSN performs prominent peroxidase-like activity by efficiently activating H2 O2 into hydroxyl radical (•OH) species. Furthermore, the Fe SSN is applied in colorimetric detection of glucose through a multienzyme biocatalytic cascade platform. Moreover, a low-cost integrated agarose-based hydrogel colorimetric biosensor is designed and successfully achieves the visualization evaluation and quantitative detection of glucose. This work expands the application of single-site catalysts in the fields of nanozyme-based biosensors and personal biomedical diagnosis.

Room-Temperature Synthesis of Single Iron Site by Electrofiltration for Photoreduction of CO2 into Tunable Syngas.

Developing a convenient and effective method to prepare single-atom catalysts at mild synthetic conditions remains a challenging task. Herein, a voltage-gauged electrofiltration method was demonstrated to synthesize single-atom site catalysts at room temperature. Under regulation of the graphene oxide membrane, a bulk Fe plate was directly converted into Fe single atoms, and the diffusion rate of Fe ions was greatly reduced, resulting in an ultralow concentration of Fe2+ around the working electrode, which successfully prevented the growing of nuclei and aggregating of metal atoms. Monatomic Fe atoms are homogeneously anchored on the as-prepared nitrogen-doped carbon. Owing to the fast photoelectron injection from photosensitizers to atomically dispersed Fe sites through the highly conductive supported N-C, the Fe-SAs/N-C exhibits an outstanding photocatalytic activity toward CO2 aqueous reduction into syngas with a tunable CO/H2 ratio under visible light irradiation. The gas evolution rates for CO and H2 are 4500 and 4950 µmol g-1 h-1, respectively, and the tunable CO/H2 ratio is from 0.3 to 8.8. This article presents an efficient strategy to develop the single-atom site catalysts and bridges the gap between heterogeneous and homogeneous catalysts toward photocatalytic CO2 aqueous reduction into syngas.

A Supported Nickel Catalyst Stabilized by a Surface Digging Effect for Efficient Methane Oxidation.

A surface digging effect of supported Ni NPs on an amorphous N-doped carbon is described, during which the surface-loaded Ni NPs would etch and sink into the underneath carbon support to prevent sintering. This process is driven by the strong coordination interaction between the surface Ni atoms and N-rich defects. In the aim of activation of C-H bonds for methane oxidation, those sinking Ni NPs could be further transformed into thermodynamically stable and active metal-defect sites within the as-generated surface holes by simply elevating the temperature. In situ transmission electron microscopy images reveal the sunk Ni NPs dig themselves adaptive surface holes, which would largely prevent the migration of Ni NPs without weakening their accessibility. The reported two-step strategy opens up a new route to manufacture sintering-resistant supported metal catalysts without degrading their catalytic efficiency.

Directly transforming copper (I) oxide bulk into isolated single-atom copper sites catalyst through gas-transport approach.

Single-atom metal catalysts have sparked tremendous attention, but direct transformation of cheap and easily obtainable bulk metal oxide into single atoms is still a great challenge. Here we report a facile and versatile gas-transport strategy to synthesize isolated single-atom copper sites (Cu ISAS/NC) catalyst at gram levels. Commercial copper (I) oxide powder is sublimated as mobile vapor at nearly melting temperature (1500 K) and subsequently can be trapped and reduced by the defect-rich nitrogen-doped carbon (NC), forming the isolated copper sites catalyst. Strikingly, this thermally stable Cu ISAS/NC, which is obtained above 1270 K, delivers excellent oxygen reduction performance possessing a recorded half-wave potential of 0.92 V vs RHE among other Cu-based electrocatalysts. By varying metal oxide precursors, we demonstrate the universal synthesis of different metal single atoms anchored on NC materials (M ISAS/NC, where M refers to Mo and Sn). This strategy is readily scalable and the as-prepared sintering-resistant M ISAS/NC catalysts hold great potential in high-temperature applications.

Highly sensitive ethanol gas sensor based on ultrathin nanosheets assembled Bi2WO6 with composite phase.

Bismuth tungstate (Bi2WO6) has many intriguing properties and has been the focus of studies in a variety of fields, especially photocatalysis. However, its application in gas-sensing has been seldom reported. Here, we successfully synthesized assembled hierarchical Bi2WO6 which consists of ultrathin nanosheets with crystalline-amorphous composite phase by a one-step hydrothermal method. X-ray diffraction (XRD), X-ray photoemission spectroscopy (XPS), field-emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM) techniques were employed to characterize its composition, morphology, and microstructure. By taking advantage of its unique microstructure, phase composition, and large surface area, we show that the resulting Bi2WO6 is capable of detecting ethanol gas with quick response (7 s) and recovery dynamic (14 s), extremely high sensitivity (Ra/Rg = 60.8@50 ppm ethanol) and selectivity. Additionally, it has excellent reproducibility and long-term stability (more than 50 d). The Bi2WO6 outperform the existing Bi2WO6-based and most of the other state-of-the-art sensing platforms. We not only provided one new member to the field of gas sensor, but also offered several strategies to reconstruct nanomaterials.

In†Situ Thermal Atomization To Convert Supported Nickel Nanoparticles into Surface-Bound Nickel Single-Atom Catalysts.

The arrangement of the active sites on the surface of a catalysts can reduce the problem of mass transfer and enhance the atom economy. Herein, supported Ni metal nanoparticles can be transformed to thermal stable Ni single atoms, mostly located on the surface of the support. Assisted by N-doped carbon with abundant defects, this synthetic process not only transform the nanoparticles to single atoms, but also creates numerous pores to facilitate the contact of dissolved CO2 and single Ni sites. The proposed mechanism is that the Ni nanoparticles could break surface C-C bonds drill into the carbon matrix, leaving pores on the surface. When Ni nanoparticles are exposed to N-doped carbon, the strong coordination splits Ni atoms from Ni NPs. The Ni atoms are stabilized within the surface of carbon substrate. The continuous loss of atomic Ni species from the NPs would finally result in atomization of Ni NPs. CO2 electroreduction testing shows that the surface enriched with Ni single atoms delivers better performance than supported Ni NPs and other similar catalysts.

Ionic Exchange of Metal-Organic Frameworks to Access Single Nickel Sites for Efficient Electroreduction of CO2.

Single-atom catalysts often exhibit unexpected catalytic activity for many important chemical reactions because of their unique electronic and geometric structures with respect to their bulk counterparts. Herein we adopt metal-organic frameworks (MOFs) to assist the preparation of a catalyst containing single Ni sites for efficient electroreduction of CO2. The synthesis is based on ionic exchange between Zn nodes and adsorbed Ni ions within the cavities of the MOF. This single-atom catalyst exhibited an excellent turnover frequency for electroreduction of CO2 (5273 h-1), with a Faradaic efficiency for CO production of over 71.9% and a current density of 10.48 mA cm-2 at an overpotential of 0.89 V. Our findings present some guidelines for the rational design and accurate modulation of nanostructured catalysts at the atomic scale.

Amorphous nickel boride membrane on a platinum-nickel alloy surface for enhanced oxygen reduction reaction.

The low activity of the oxygen reduction reaction in polymer electrolyte membrane fuel cells is a major barrier for electrocatalysis, and hence needs to be optimized. Tuning the surface electronic structure of platinum-based bimetallic alloys, a promising oxygen reduction reaction catalyst, plays a key role in controlling its interaction with reactants, and thus affects the efficiency. Here we report that a dealloying process can be utilized to experimentally fabricate the interface between dealloyed platinum-nickel alloy and amorphous nickel boride membrane. The coating membrane works as an electron acceptor to tune the surface electronic structure of the platinum-nickel catalyst, and this composite catalyst composed of crystalline platinum-nickel covered by amorphous nickel boride achieves a 27-times enhancement in mass activity relative to commercial platinum/carbon at 0.9 V for the oxygen reduction reaction performance. Moreover, this interactional effect between a crystalline surface and amorphous membrane can be readily generalized to facilitate the 3-times higher catalytic activity of commercial platinum/carbon.

Platinum-nickel frame within metal-organic framework fabricated in situ for hydrogen enrichment and molecular sieving.

Developing catalysts that provide the effective activation of hydrogen and selective absorption of substrate on metal surface is crucial to simultaneously improve activity and selectivity of hydrogenation reaction. Here we present an unique in situ etching and coordination synthetic strategy for exploiting a functionalized metal-organic framework to incorporate the bimetallic platinum-nickel frames, thereby forming a frame within frame nanostructure. The as-grown metal-organic framework serves as a 'breath shell' to enhance hydrogen enrichment and activation on platinum-nickel surface. More importantly, this framework structure with defined pores can provide the selective accessibility of molecules through its one-dimensional channels. In a mixture containing four olefins, the composite can selectively transport the substrates smaller than its pores to the platinum-nickel surface and catalyse their hydrogenation. This molecular sieve effect can be also applied to selectively produce imines, which are important intermediates in the reductive imination of nitroarene, by restraining further hydrogenation via cascade processes.