Production of an antibody Fab fragment using 2A peptide in insect cells.

Antibody Fab fragments consist of heavy chain (Hc) and light chain (Lc) polypeptides assembled with a disulphide bond. The production of a recombinant Fab fragment requires the simultaneous expression of two genes encoding both an Hc and an Lc in the same host cell. In the present study, we investigated the production of Fab fragments in lepidopteran insect cells using a bicistronic plasmid vector carrying the Hc and Lc genes linked with a 2A self-cleaving peptide sequence from the porcine teschovirus-1. We also examined the arrangement of a GSG spacer sequence and a furin cleavage site sequence with the 2A sequence. Western blot analysis and enzyme-linked immunosorbent assay (ELISA) of culture supernatants showed that Trichoplusia ni BTI-TN-5B1-4 (High Five) cells transfected with a plasmid in which the Hc and Lc genes were joined by the 2A sequence successfully secreted Fab fragments with antigen-binding activity after self-cleavage of the 2A peptide. The GSG linker enhanced 2A cleavage efficiency, and the furin recognition site was useful for removal of 2A residues from the Hc. Transfection with a single plasmid that contained sequences for GSG, the furin cleavage site, GSG, and the 2A peptide between the Hc and Lc genes exhibited a higher productivity than co-transfection with a set of plasmids separately carrying the Hc or Lc gene. These results demonstrate that bicistronic expression with the appropriate combination of a furin recognition site, GSG linkers, and a 2A peptide may be an effective way to efficiently produce recombinant antibody molecules in insect cells.

Evaluation of protein-ligand interactions using the luminescent interaction assay FlimPIA with streptavidin-biotin linkage.

Post-translational modifications, such as phosphorylation, are crucial in the regulation of protein-protein interactions and protein function in cell signaling. Here, we studied the interaction between the transactivation domain peptide of cancer suppressor protein p53 and its negative regulator Mdm2 using a novel protein-protein interaction assay, based on the modified FlimPIA using the streptavidin-biotin interaction to link the p53 peptide and the probe enzyme. We succeeded in detecting an attenuation in the affinity of p53 towards Mdm2 caused by the phosphorylation at Thr18. It showed that the targets, which are not easy to fuse with the FlimPIA probes, such as phosphorylated peptides can be used in this system. Also, the use of streptavidin nanobeads was found effective to get clearer signal, probably due to concentration of the detection system onto the bead surface. The system was further applied to the detection of FKBP-FRB interaction using biotinylated FKBP domain, which suggested another potential merit of this system that allows to avoid misfolding and steric hindrance often observed for the fusion protein approach.

Modifications of a signal sequence for antibody secretion from insect cells.

Monoclonal antibodies and antibody fragments have recently been developed for use in diverse diagnostic and therapeutic applications. Insect cells can efficiently secrete recombinant proteins such as antibody molecules through post-translational processing and modifications that are similar to those performed in mammalian cells. In eukaryotic cells, the signal sequence in a nascent polypeptide is recognized by the signal recognition particle, and the polypeptide is then folded and modified in the endoplasmic reticulum. The signal sequence consists of three regions, a positively charged N-terminus, a hydrophobic core, and a polar C-terminus. In the present study, we examined the substitutions of the characteristic amino acids of a Drosophila immunoglobulin heavy chain binding protein signal sequence, and investigated the effect on the secretory production of an antibody Fab fragment from lepidopteran insect cells in transient expression. A modification of the signal sequence for the heavy chain resulted in a twofold increase in the secreted Fab fragment, while the modification for the light chain led to a more than 3.6-fold increase.

Electrostatic engineering of the interface between heavy and light chains promotes antibody Fab fragment production.

Monoclonal antibodies and antibody fragments are used for diverse diagnostic and therapeutic applications. We have investigated the secretory production of Fab fragments from insect cells cotransfected with plasmid vectors carrying heavy- and light-chain genes. In the present study, to promote the formation of the disulfide bond between the heavy and light chains, some positively charged amino acid residues were introduced near the cysteine residue for the disulfide bond at the C-terminus of CL, while some negatively charged amino acid residues were added near the cysteine residue for the disulfide bond at the C-terminus of CH1. This electrostatic steering led to an increase in Fab secretions from insect cells.

Ultra sensitive firefly luciferase-based protein-protein interaction assay (FlimPIA) attained by hinge region engineering and optimized reaction conditions.

Detecting and assaying protein-protein interactions are significant research procedures in biology and biotechnology. We recently reported a novel assay to detect protein-protein interaction, i.e. firefly luminescent intermediate-based protein-protein interaction assay (FlimPIA) using two mutant firefly luciferases (Flucs), which complement each other's deficient half reaction. This assay detects neighboring of two mutant Flucs, namely, a "Donor" that catalyzes the adenylation of firefly luciferin to produce a luciferyl-adenylate intermediate, and an "Acceptor" that catalyzes the subsequent light emitting reaction. However, its rather high background signal, derived from the remaining adenylation activity of the Acceptor, has limited its usefulness. To reduce this background signal, we introduced a mutation (R437K) into the hinge region of the Acceptor, while maintaining the oxidative activity. Interestingly, the signal/background (S/B) ratio of the assay was markedly improved by the addition of coenzyme A and reduction of the ATP concentration, probably due to reduced inhibition by dehydroluciferyl-adenylate formed during the catalysis and an increased ATP-based Km value of the Acceptor, respectively. As a result, a significantly improved maximal S/B ratio from 2.5 to ∼40 was attained, which promises wider use of the assay in in vitro diagnostics, drug discovery, and expanding our knowledge of various biological phenomena.

Suitability and perspectives on using recombinant insect cells for the production of virus-like particles.

Virus-like particles (VLPs) can be produced in recombinant protein production systems by expressing viral surface proteins that spontaneously assemble into particulate structures similar to authentic viral or subviral particles. VLPs serve as excellent platforms for the development of safe and effective vaccines and diagnostic antigens. Among various recombinant protein production systems, the baculovirus-insect cell system has been used extensively for the production of a wide variety of VLPs. This system is already employed for the manufacture of a licensed human papillomavirus-like particle vaccine. However, the baculovirus-insect cell system has several inherent limitations including contamination of VLPs with progeny baculovirus particles. Stably transformed insect cells have emerged as attractive alternatives to the baculovirus-insect cell system. Different types of VLPs, with or without an envelope and composed of either single or multiple structural proteins, have been produced in stably transformed insect cells. VLPs produced by stably transformed insect cells have successfully elicited immune responses in vivo. In some cases, the yield of VLPs attained with recombinant insect cells was comparable to, or higher than, that obtained by baculovirus-infected insect cells. Recombinant insect cells offer a promising approach to the development and production of VLPs.

Production of Japanese encephalitis virus-like particles in insect cells.

Virus-like particles (VLPs) are composed of one or several recombinant viral surface proteins that spontaneously assemble into particulate structures without the incorporation of virus DNA or RNA. The baculovirus-insect cell system has been used extensively for the production of recombinant virus proteins including VLPs. While the baculovirus-insect cell system directs the transient expression of recombinant proteins in a batch culture, stably transformed insect cells allow constitutive production. In our recent study, a secretory form of Japanese encephalitis (JE) VLPs was successfully produced by Trichoplusia ni BTI-TN-5B1-4 (High Five) cells engineered to coexpress the JE virus (JEV) premembrane (prM) and envelope (E) proteins. A higher yield of E protein was attained with recombinant High Five cells than with the baculovirus-insect cell system. This study demonstrated that recombinant insect cells offer a promising approach to the high-level production of VLPs for use as vaccines and diagnostic antigens.

Production of Japanese encephalitis virus-like particles using the baculovirus-insect cell system.

The production of a secreted form of Japanese encephalitis (JE) virus-like particles (VLPs) using the baculovirus-insect cell system was investigated. A recombinant baculovirus that contained the JE virus (JEV) prM signal sequence and the genes encoding the precursor (prM) of the viral membrane protein (M) and the envelope glycoprotein (E) was constructed. Western blotting and enzyme-linked immunosorbent assay (ELISA) of the culture supernatant showed that Spodoptera frugiperda Sf9 cells infected with the recombinant baculovirus had secreted the E protein. Sucrose density-gradient sedimentation analysis of the culture supernatant suggested that secreted E antigen molecules were in a particulate form. Baculovirus-infected Sf9 cells produced more than a 10-fold higher yield of E antigen than that produced by previously reported recombinant CHO cells. Following infection with a recombinant baculovirus encoding a form of prM with a pr/M cleavage site mutation designed to suppress cell-fusion activity of E, Sf9 cells showed an E antigen yield comparable to a yield obtained with the baculovirus encoding the authentic form of prM. Baculovirus-infected Trichoplusia ni BTI-TN-5B1-4 (High Five) cells secreted less of the E antigen than Sf9 cells. Moreover, the Drosophila BiP signal sequence gave an E antigen yield comparable to the prM signal sequence, while the honeybee melittin signal sequence and the baculovirus gp64 signal sequence resulted in lower yields of the E antigen. These results provide information important to the development of VLP production processes using the baculovirus-insect cell system.

Immobilization of 293 cells using porous support particles for adenovirus vector production.

Adenovirus vector production by anchorage-independent 293 cells immobilized using porous biomass support particles (BSPs) was investigated in static and shake-flask cultures for efficient large-scale production of adenovirus vectors for gene therapy applications. The density of cells immobilized within BSPs was evaluated by measuring their WST-8 (2-(2-methoxy-4-nitrophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium, monosodium salt) reduction activity. In shake-flask culture, 293-F cells, which were adapted to serum-free suspension culture, were not successfully retained within reticulated polyvinyl formal (PVF) resin BSPs (2 × 2 × 2 mm cubes) with matrices of relatively small pores (pore diameter 60 µm). When the BSPs were coated with a cationic polymer polyethyleneimine, a high cell density of more than 10(7) cells cm(-3)-BSP was achieved in both static and shake-flask cultures with regular replacement of the culture medium. After infection with an adenovirus vector carrying the enhanced green fluorescent protein gene (Ad EGFP), the specific Ad EGFP productivity of the immobilized cells was comparable to the maximal productivity of non-immobilized 293-F cells by maintaining favorable conditions in the culture environment.

Adenovirus vector production using low-multiplicity infection of 293 cells.

The use of low-multiplicity infection of 293 cells in static culture with regular medium replacement was investigated for efficient large-scale production of adenovirus vectors for gene therapy applications. An adenovirus vector carrying the enhanced green fluorescent protein gene (Ad EGFP) was used to infect 293-F cells at a low multiplicity of infection (MOI) of 0.00001-0.1 transductional unit (TU) cell(-1). The cells, which have the ability to grow in suspension, were incubated in T-flasks and the serum-free culture medium was replaced with fresh medium via centrifugation every 2 days. Because only a small proportion of cells were initially infected at low MOIs (<1 TU cell(-1)), uninfected cells continued to grow until they were infected by progeny adenoviruses released from previously infected cells. When 293-F cells at a relatively low density of 1 x 10(5) cells cm(-3) were infected with Ad EGFP at a low MOI of 0.001 TU cell(-1), the vector yield was 2.7-fold higher than the maximum yield obtained with high-multiplicity infection (MOI = 10 TU cell(-1)) in batch culture. These results indicate that efficient adenovirus vector production using low MOIs is achieved by minimization of either nutrient depletion and/or accumulation of inhibitory metabolites in the culture medium.

Efficient production of single-chain Fv antibody possessing rare codon linkers in fed-batch fermentation.

Single-chain Fv antibody (scFv) having 2 types of polypeptide linkers with or without rare codons, namely scFv (G(4)S)(3)(R) and scFv No.10 (with rare codons) and scFv (G(4)S)(3) and scFv No.10(NR) (without rare codon), were expressed under controllable conditions in batch and fed-batch fermentation, in order to compare volumetric productivity and specific productivity levels of scFvs as a soluble form. In batch fermentation, volumetric productivity levels of scFv (G(4)S)(3)(R) and scFv No.10, namely scFvs having the rare codon linkers were 3-5 times higher than those of scFvs that had linkers without the rare codon. In fed-batch fermentation controlled by an exponential feeding system, the cell concentrations of the transformants increased with similar specific growth rates (0.1 h(-1)), while the specific productivity levels of scFvs with the rare codon linkers were 1.6 times higher than those of scFvs without the rare codon linkers. These results indicate that the presence of several rare codons in the gene of a polypeptide linker increases soluble amount of scFvs. This might be caused by a temporary decrease in translation speed at the position of the polypeptide linker allowing time for the folding of the V(H) domain and avoiding unfavorable interactions between amino acid residues at the unfolded V(H) and V(L) domains. Higher specific productivity levels of both scFv No. 10 and scFv No. 10(NR) than those of scFv (G(4)S)(3)(R) and (G(4)S)(3) might be caused by difference in stability of the polypeptide linkers on the basis of amino acid sequences. Thus, the rare codon linkers tested in this study will be considerably useful for large-scale production of soluble and active scFvs in fed-batch or continuous fermentations, in which high cell activity can be maintained.

Angiotensin-I converting enzyme (ACE) inhibitory mechanism of tripeptides containing aromatic residues.

Angiotensin-I converting enzyme (ACE) plays important roles in the regulation of blood pressure, and ACE inhibitory peptides in food materials have attracted attention for their antihypertensive function. In this study, the function of amino acids in ACE inhibitory tripeptides was clarified.

Production of bionanocapsules in immobilized insect cell culture using porous biomass support particles.

L particles, composed of the L protein of the hepatitis B virus surface antigen, are candidates for a specific gene and drug delivery system. We previously constructed stably transfected insect cells for L particle production. In this study, the cells were successfully immobilized within porous biomass support particles (BSPs) in shake-flask culture. The immobilized cells showed a high specific productivity, comparable to the maximum productivities in static and shake-flask cultures of nonimmobilized cells.