Design, synthesis, and evaluation of the self-assembled antimicrobial peptides based on the ovalbumin-derived peptide TK913.

The preparation, self-assembly, and antimicrobial activity of peptides based on TK913 is described. TK9Z4 incorporating a Pro-Pro motif exhibited self-assembly but no cytotoxicity. However, peptide TKZ3 (obtained by changing the amino acid sequence of TK9Z4) showed morphological changes at different concentrations, potent antimicrobial activity, low cytotoxicity, and trypsin resistance. Accordingly, TKZ3 is proposed as new AMP derived from ovalbumin-derived peptides.

Mixed Polyplex Micelles with Thermoresponsive and Lysine-Based Zwitterionic Shells Derived from Two Poly(vinyl amine)-Based Block Copolymers.

Two series of poly(vinyl amine) (PVAm)-based block copolymers with zwitterionic and thermoresponsive segments were synthesized by the reversible addition-fragmentation chain transfer polymerization. A mixture of the two copolymers, poly(N-acryloyl-l-lysine) (PALysOH) and poly(N-isopropylacrylamide) (PNIPAM), which have the same cationic PVAm chain but different shell-forming segments, were used to prepare mixed polyplex micelles with DNA. Both PVAm-b-PALysOH and PVAm-b-PNIPAM showed low cytotoxicity, with characteristic assembled structures and stimuli-responsive properties. The cationic PVAm segment in both block copolymers showed site-specific interactions with DNA, which were evaluated by dynamic light scattering, zeta potential, circular dichroism, agarose gel electrophoresis, atomic force microscopy, and transmission electron microscopy measurements. The PVAm-b-PNIPAM/DNA polyplexes showed the characteristic temperature-induced formation of assembled structures in which the polyplex size, surface charge, chiroptical property of DNA, and polymer-DNA binding were governed by the nitrogen/phosphate (N/P) ratio. The DNA binding strength and colloidal stability of the PVAm-b-PALysOH/DNA polyplexes could be tuned by introducing an appropriate amount of zwitterionic PALysOH functionality, while maintaining the polyplex size, surface charge, and chiroptical property, regardless of the N/P ratio. The mixed polyplex micelles showed temperature-induced stability originating from the hydrophobic (dehydrated) PNIPAM chains upon heating, and remarkable stability under salty conditions owing to the presence of the zwitterionic PALysOH chain on the polyplex surface.

Detection of Thiol Functionality and Disulfide Bond Formation by Polyoxometalate.

The detection of thiol functionality and intramolecular disulfide bond formation of peptides using the α-Keggin type polyoxometalate molybdenum-oxygen cluster (H3PMo12O40·nH2O) is described. Our method entails the addition of this polyoxometalate to solutions of thiol, whereupon the color of the solution changes from colorless to deep blue. Reduction of the polyoxometalate from Mo(VI) to Mo(V) occurs with concomitant oxidation of the thiol functionality, to form disulfide bonds. To exemplify the utility this phenomenon, we accomplished the oxidation of glutathione, reduced linear oxytocin, bactenecin, and α-conotoxin SI; all of which proceeded smoothly and in good conversion in 24 h to less and were accomplished by a change in the color of the reaction solutions.

Synthesis, Assembled Structures, and DNA Complexation of Thermoresponsive Lysine-Based Zwitterionic and Cationic Block Copolymers.

A series of anionic, zwitterionic, and cationic lysine-based block copolymers with a thermoresponsive segment were synthesized by the reversible addition-fragmentation chain transfer (RAFT) polymerization of N-acryloyl- N-carbobenzoxy-l-lysine [A-Lys(Cbz)-OH], which contains a carboxylic acid and a protected amine-functionality in the monomer unit. Carboxylic acid-containing homopolymers, poly(A-Lys(Cbz)-OH), with predetermined molecular weights with relatively low polydispersities were initially synthesized by RAFT polymerization of A-Lys(Cbz)-OH. The chain extension of the dithiocarbamate-terminated poly(A-Lys(Cbz)-OH) to N-isopropylacrylamide (NIPAM) via the RAFT process and subsequent deprotection afforded the zwitterionic block copolymer composed of thermoresponsive poly(NIPAM) and poly(A-Lys-OH), which exhibited switchability among the zwitterionic, anionic, and cationic states by pH change. The assembled structures and thermoresponsive and chiroptical properties of these block copolymers were evaluated by dynamic light scattering, circular dichroism, and turbidity measurements. Finally, the cationic block copolymer, poly(A-Lys-OMe)- b-poly(NIPAM), was obtained by the methylation of the carboxylic acid group in the zwitterionic poly(A-Lys-OH) segment. Selective interactions of DNA with the cationic poly(A-Lys-OMe) segment in the lysine-based block copolymer were further evaluated by agarose gel electrophoresis and atomic force microscopy measurements, which revealed characteristic assembled structures and temperature-responsive properties of the polyplexes.

Enzymatic and molecular characterization of α-1,3-glucanase (AglST2) from Streptomyces thermodiastaticus HF3-3 and its relation with α-1,3-glucanase HF65 (AglST1).

Extracellular α-1,3-glucanase HF90 (AglST2), with a sodium dodecyl sulfate (SDS)-PAGE-estimated molecular mass of approximately 91 kDa, was homogenously purified from the culture filtrate of Streptomyces thermodiastaticus HF3-3. AglST2 showed a high homology with mycodextranase in an amino acid sequence and demonstrated specificity with an α-1,3-glycosidic linkage of homo α-1,3-glucan. It has been suggested that AglST2 may be a new type of α-1,3-glucanase. The optimum pH and temperature of AglST2 were pH 5.5 and 60°C, respectively. AglST2 action was significantly stimulated in the presence of 5-20% (w/v) NaCl, and 1 mM metal ions Mn2+ and Co2+. On the other hand, it was inhibited by 1 mM of Ag+, Cu2+, Fe2+ and Ni2+. Regarding the stability properties, AglST2 retained more than 80% of its maximum activity over a pH range of 5.0-7.0 at up to 60°C and in the presence of 0-20% (w/v) NaCl. Based on these results, the properties of AglST2 were comparable with those of AglST1, which had been previously purified and characterized from S. thermodiastaticus HF3-3 previously. The N-terminal amino acid sequence of AglST2 showed a good agreement with that of AglST1, suggesting that AglST1 was generated from AglST2 by proteolysis during cultivation. MALDI-TOF mass analysis suggested that AglST1 might be generated from AglST2 by the proteolytic removal of C-terminus polypeptide (approximately 20 kDa). Our investigation thus revealed the properties of AglST2, such as tolerance against high temperature, salts, and surfactants, which have promising industrial applications.

pH-Responsive Charge-Conversional and Hemolytic Activities of Magnetic Nanocomposite Particles for Cell-Targeted Hyperthermia.

Magnetic nanocomposite particle (MNP)-induced hyperthermia therapy has been restricted by inefficient cellular targeting. pH-responsive charge-conversional MNPs can enhance selective cellular uptake in acidic cells like tumors by sensing extracellular acidity based on their charge alteration. We have synthesized new, pH-induced charge-conversional, superparamagnetic, and single-cored Fe3O4 nanocomposite particles coated by N-itaconylated chitosan (NICS) cross-linked with ethylene glycol diglycidyl ether (EGDE) (Fe3O4-NICS-EGDE) using a simple, one-step chemical coprecipitation-coating process. The surface of the Fe3O4-NICS-EGDE nanocomposite particles was modified with ethanolamine (EA) via aza-Michael addition to enhance their buffering capacity, aqueous stability, and pH sensitivity. The designed Fe3O4-NICS-EGDE-EA nanocomposite particles showed pH-dependent charge-conversional properties, colloidal stability, and excellent hemocompatibility in physiological media. By contrast, the charge-conversional properties enabled microwave-induced hemolysis only under weakly acidic conditions. Therefore, the composite particles are highly feasible for magnetically induced and targeted cellular thermotherapeutic applications.

Synthesis and evaluation of phenylisoserine derivatives for the SARS-CoV 3CL protease inhibitor.

Synthesis and evaluation of new scaffold phenylisoserine derivatives connected with the essential functional groups against SARS CoV 3CL protease are described. The phenylisoserine backbone was found by simulation on GOLD software and the structure activity relationship study of phenylisoserine derivatives gave SK80 with an IC50 value of 43µM against SARS CoV 3CL R188I mutant protease.

Effective treatment for suppression of acrylamide formation in fried potato chips using L-asparaginase from Bacillus subtilis.

It has been reported that acrylamide, a potential carcinogen, is formed from the reaction of L-asparagine (L-Asn) and reducing sugars contained in foods during heating processes and free asparagine is a limiting factor for acrylamide formation. It has been reported that potato products such as potato chips, which are made through heating processes, contain high levels of acrylamide. To decrease the amount of L-Asn in potatoes using L-asparaginase, effective treatment conditions of sliced potatoes with the enzyme have been investigated. By treating sliced potatoes with Bacillus subtilis L-asparaginase II (BAsnase; 4 U/g potato), appriximately 40 % of L-Asn in the sliced potatoes was converted into L-aspartic acid (L-Asp). To make this enzyme more effective, prior to enzymatic treatment, sliced potatoes were freeze-thawed, dried at 90 °C for 20 min, and vacuum treated for 10 min under decompressed condition, resulting in the hydrolysis of approximately 90 % of L-Asn to L-Asp. The acrylamide content of BAsnase-treated fried potato chips decreased to below 20 % of that of BAsnase-untreated fried potato chips. Treatment conditions examined in this study were found to be effective to suppress the formation of acrylamide in fried potato chips.

Surface α-1,3-glucan facilitates fungal stealth infection by interfering with innate immunity in plants.

Plants evoke innate immunity against microbial challenges upon recognition of pathogen-associated molecular patterns (PAMPs), such as fungal cell wall chitin. Nevertheless, pathogens may circumvent the host PAMP-triggered immunity. We previously reported that the ascomycete Magnaporthe oryzae, a famine-causing rice pathogen, masks cell wall surfaces with α-1,3-glucan during invasion. Here, we show that the surface α-1,3-glucan is indispensable for the successful infection of the fungus by interfering with the plant's defense mechanisms. The α-1,3-glucan synthase gene MgAGS1 was not essential for infectious structure development but was required for infection in M. oryzae. Lack or degradation of surface α-1,3-glucan increased fungal susceptibility towards chitinase, suggesting the protective role of α-1,3-glucan against plants' antifungal enzymes during infection. Furthermore, rice plants secreting bacterial α-1,3-glucanase (AGL-rice) showed strong resistance not only to M. oryzae but also to the phylogenetically distant ascomycete Cochlioborus miyabeanus and the polyphagous basidiomycete Rhizoctonia solani; the histocytochemical analysis of the latter two revealed that α-1,3-glucan also concealed cell wall chitin in an infection-specific manner. Treatment with α-1,3-glucanase in vitro caused fragmentation of infectious hyphae in R. solani but not in M. oryzae or C. miyabeanus, indicating that α-1,3-glucan is also involved in maintaining infectious structures in some fungi. Importantly, rapid defense responses were evoked (a few hours after inoculation) in the AGL-rice inoculated with M. oryzae, C. miyabeanus and R. solani as well as in non-transgenic rice inoculated with the ags1 mutant. Taken together, our results suggest that α-1,3-glucan protected the fungal cell wall from degradative enzymes secreted by plants even from the pre-penetration stage and interfered with the release of PAMPs to delay innate immune defense responses. Because α-1,3-glucan is nondegradable in plants, it is reasonable that many fungal plant pathogens utilize α-1,3-glucan in the innate immune evasion mechanism and some in maintaining the structures.