Enhancing Craniofacial Bone Reconstruction with Clinically Applicable 3D Bioprinted Constructs.

Medical imaging and 3D bioprinting can be used to create patient-specific bone scaffolds with complex shapes and controlled inner architectures. This study investigated the effectiveness of a biomimetic approach to scaffold design by employing geometric control. The biomimetic scaffold with a dense external layer showed improved bone regeneration compared to the control scaffold. New bone filled the defected region in the biomimetic scaffolds, while the control scaffolds only presented new bone at the boundary. Histological examination also shows effective bone regeneration in the biomimetic scaffolds, while fibrotic tissue ingrowth is observed in the control scaffolds. These findings suggest that the biomimetic bone scaffold, designed to minimize competition for fibrotic tissue formation in the bony defect, can enhance bone regeneration. This study underscores the notion that patient-specific anatomy can be accurately translated into a 3D bioprinting strategy through medical imaging, leading to the fabrication of constructs with significant clinical relevance.

Synovium-Derived Mesenchymal Stem Cell-Based Scaffold-Free Fibrocartilage Engineering for Bone-Tendon Interface Healing in an Anterior Cruciate Ligament Reconstruction Model.

BACKGROUND: Current tendon and ligament reconstruction surgeries rely on scar tissue healing which differs from native bone-to-tendon interface (BTI) tissue. We aimed to engineer Synovium-derived mesenchymal stem cells (Sy-MSCs) based scaffold-free fibrocartilage constructs and investigate in vivo bone-tendon interface (BTI) healing efficacy in a rat anterior cruciate ligament (ACL) reconstruction model. METHODS: Sy-MSCs were isolated from knee joint of rats. Scaffold-free sy-MSC constructs were fabricated and cultured in differentiation media including  TGF-ß-only, CTGF-only, and TGF-ß + CTGF. Collagenase treatment on tendon grafts was optimized to improve cell-to-graft integration. The effects of fibrocartilage differentiation and collagenase treatment on BTI integration was assessed by conducting histological staining, cell adhesion assay, and tensile testing. Finally, histological and biomechanical analyses were used to evaluate in vivo efficacy of fibrocartilage construct in a rat ACL reconstruction model. RESULTS: Fibrocartilage-like features were observed with in the scaffold-free sy-MSC constructs when applying TGF-ß and CTGF concurrently. Fifteen minutes collagenase treatment increased cellular attachment 1.9-fold compared to the Control group without affecting tensile strength. The failure stress was highest in the Col + D + group (22.494 ± 13.74 Kpa) compared to other groups at integration analysis in vitro. The ACL Recon + FC group exhibited a significant 88% increase in estimated stiffness (p = 0.0102) compared to the ACL Recon group at the 4-week postoperative period. CONCLUSION: Scaffold-free, fibrocartilage engineering together with tendon collagenase treatment enhanced fibrocartilaginous BTI healing in ACL reconstruction.

3D Bioprinted Liver-on-a-Chip for Drug Cytotoxicity Screening.

Tissues on a chip are sophisticated three-dimensional (3D) in vitro microphysiological systems designed to replicate human tissue conditions within dynamic physicochemical environments. However, the current fabrication methods for tissue spheroids on a chip require multiple parts and manual processing steps, including the deposition of spheroids onto prefabricated "chips." These challenges also lead to limitations regarding scalability and reproducibility. To overcome these challenges, we employed 3D printing techniques to automate the fabrication process of tissue spheroids on a chip. This allowed the simultaneous high-throughput printing of human liver spheroids and their surrounding polymeric flow chamber "chips" containing inner channels in a single step. The fabricated liver tissue spheroids on a liver-on-a-chip (LOC) were subsequently subjected to dynamic culturing by a peristaltic pump, enabling assessment of cell viability and metabolic activities. The 3D printed liver spheroids within the printed chips demonstrated high cell viability (>80%), increased spheroid size, and consistent adenosine triphosphate (ATP) activity and albumin production for up to 14 days. Furthermore, we conducted a study on the effects of acetaminophen (APAP), a nonsteroidal anti-inflammatory drug, on the LOC. Comparative analysis revealed a substantial decline in cell viability (<40%), diminished ATP activity, and reduced spheroid size after 7 days of culture within the APAP-treated LOC group, compared to the nontreated groups. These results underscore the potential of 3D bioprinted tissue chips as an advanced in vitro model that holds promise for accurately studying in vivo biological processes, including the assessment of tissue response to administered drugs, in a high-throughput manner.

In vitrobreast cancer model with patient-specific morphological features for personalized medicine.

In vitrocancer models that can simulate patient-specific drug responses for personalized medicine have attracted significant attention. However, the technologies used to produce such models can only recapitulate the morphological heterogeneity of human cancer tissue. Here, we developed a novel 3D technique to bioprint anin vitrobreast cancer model with patient-specific morphological features. This model can precisely mimic the cellular microstructures of heterogeneous cancer tissues and produce drug responses similar to those of human cancers. We established a bioprinting process for generating cancer cell aggregates with ductal and solid tissue microstructures that reflected the morphology of breast cancer tissues, and applied it to develop breast cancer models. The genotypic and phenotypic characteristics of the ductal and solid cancer aggregates bioprinted with human breast cancer cells (MCF7, SKBR3, MDA-MB-231) were respectively similar to those of early and advanced cancers. The bioprinted solid cancer cell aggregates showed significantly higher hypoxia (>8 times) and mesenchymal (>2-4 times) marker expressions, invasion activity (>15 times), and drug resistance than the bioprinted ductal aggregates. Co-printing the ductal and solid aggregates produced heterogeneous breast cancer tissue models that recapitulated three different stages of breast cancer tissue morphology. The bioprinted cancer tissue models representing advanced cancer were more and less resistant, respectively, to the anthracycline antibiotic doxorubicin and the hypoxia-activated prodrug tirapazamine; these were analogous to the results in human cancer. The present findings showed that cancer cell aggregates can mimic the pathological micromorphology of human breast cancer tissue and they can be bioprinted to produce breast cancer tissuein vitrothat can morphologically represent the clinical stage of cancer in individual patients.

Accelerating neovascularization and kidney tissue formation with a 3D vascular scaffold capturing native vascular structure.

Establishing an adequate vascularization of three-dimensional (3D) bioengineered tissues remains a critical challenge. We previously fabricated a vascular scaffold using the vascular corrosion casting technique, which provides a similar 3D geometry of native kidney vasculature. In this study, we functionalized the collagen vascular scaffold with a controlled release of vascular endothelial growth factor (VEGF vascular scaffold) to further promote vascularization. The VEGF vascular scaffold showed improved angiogenic capability in 2-dimensional (2D) and 3D in vitro settings. Implantation of the VEGF vascular scaffold seeded with human renal cells into a rat kidney demonstrated enhanced implant vascularization and reduced apoptosis of implanted human renal cells. Hybrid renal tubule-like structures composed of implanted human and migrated host renal cells were formed. This work highlights the critical role of early vascularization of the geometrically mimetic vascular scaffold using the VEGF incorporated vascular scaffold in reducing apoptosis of implanted cells as well as the formation of renal tissue structures.

Engineering Functional Rat Ovarian Spheroids Using Granulosa and Theca Cells.

Although menopausal hormone therapy (MHT) is the most effective approach to managing the loss of ovarian activity, serious side effects have been reported. Cell-based therapy is a promising alternative for MHT. This study constructed engineered ovarian cell spheroids and investigated their endocrine function. Theca and granulosa cells were isolated from ovaries of 10-week-old rats. Two types of engineered ovarian cell spheroids were fabricated through forced aggregation in microwells, multilayered spheroids with centralized granulosa aggregates surrounded by an outer layer of theca cells and mixed ovarian spheroids lacking spatial rearrangement. The ovarian cell spheroids were encapsulated into a collagen gel. Non-aggregated ovarian cells served as controls. The endocrine function of the engineered ovarian spheroids was assessed over 30 days. The structure of the spheroids was well maintained during culture. The secretion of 17ß-estradiol from both types of engineered ovarian cell spheroids was higher than in the control group and increased continuously in a time-dependent manner. Secretion of 17ß-estradiol in the multi-layered ovarian cell spheroids was higher than in the non-layered constructs. Increased secretion of progesterone was detected in the multi-layered ovarian cell spheroids at day 5 of culture and was sustained during the culture period. The initial secretion level of progesterone in the non-layered ovarian cell spheroids was similar to those from the controls and increased significantly from days 21 to 30. An in vitro rat model of engineered ovarian cell spheroids was developed that was capable of secreting sex steroid hormones, indicating that the hormone secreting function of ovaries can be recapitulated ex vivo and potentially adapted for MHT.

The Role of the Microenvironment in Controlling the Fate of Bioprinted Stem Cells.

The field of tissue engineering and regenerative medicine has made numerous advances in recent years in the arena of fabricating multifunctional, three-dimensional (3D) tissue constructs. This can be attributed to novel approaches in the bioprinting of stem cells. There are expansive options in bioprinting technology that have become more refined and specialized over the years, and stem cells address many limitations in cell source, expansion, and development of bioengineered tissue constructs. While bioprinted stem cells present an opportunity to replicate physiological microenvironments with precision, the future of this practice relies heavily on the optimization of the cellular microenvironment. To fabricate tissue constructs that are useful in replicating physiological conditions in laboratory settings, or in preparation for transplantation to a living host, the microenvironment must mimic conditions that allow bioprinted stem cells to proliferate, differentiate, and migrate. The advances of bioprinting stem cells and directing cell fate have the potential to provide feasible and translatable approach to creating complex tissues and organs. This review will examine the methods through which bioprinted stem cells are differentiated into desired cell lineages through biochemical, biological, and biomechanical techniques.

The effect of BMP-mimetic peptide tethering bioinks on the differentiation of dental pulp stem cells (DPSCs) in 3D bioprinted dental constructs.

The goal of this study was to use 3D bioprinting technology to create a bioengineered dental construct containing human dental pulp stem cells (hDPSCs). To accomplish this, we first developed a novel bone morphogenetic protein (BMP) peptide-tethering bioink formulation and examined its rheological properties, its printability, and the structural stability of the bioprinted construct. Second, we evaluated the survival and differentiation of hDPSCs in the bioprinted dental construct by measuring cell viability, proliferation, and gene expression, as well as histological and immunofluorescent analyses. Our results showed that the peptide conjugation into the gelatin methacrylate-based bioink formulation was successfully performed. We determined that greater than 50% of the peptides remained in the bioprinted construct after three weeks in vitro cell culture. Human DPSC viability was >90% in the bioprinted constructs immediately after the printing process. Alizarin Red staining showed that the BMP peptide construct group exhibited the highest calcification as compared to the growth medium, osteogenic medium, and non-BMP peptide construct groups. In addition, immunofluorescent and quantitative reverse transcription-polymerase chain reaction analyses showed robust expression of dentin sialophosphoprotein and osteocalcin in the BMP peptide dental constructs. Together, these results strongly suggested that BMP peptide-tethering bioink could accelerate the differentiation of hDPSCs in 3D bioprinted dental constructs.

Dynamic Changes in Erectile Function and Histological Architecture After Intracorporal Injection of Human Placental Stem Cells in a Pelvic Neurovascular Injury Rat Model.

INTRODUCTION: The human placenta provides a bountiful and noncontroversial source of stem cells which have the potential for regeneration of injured tissue. These cells may restore erectile function after neurovascular tissue injury such as that seen in radical pelvic surgeries and pelvic trauma. AIM: To determine the effect of human placenta-derived stem cells on erectile function recovery and histological changes at various time points in a cavernous nerve injury rat model and to study the fate of injected stem cells throughout the regenerative process. METHODS: Human placental stem cells (PSCs) were dual labeled with monomeric Katushka far red fluorescent protein (mKATE)-renLUC using a lentivirus vector. A pelvic neurovascular injury-induced erectile dysfunction model was established in male, athymic rats by crushing the cavernous nerves and ligating the internal pudendal neurovascular bundles, bilaterally. At the time of defect creation, nonlabeled PSCs were injected into the corpus cavernosum at a concentration of 2.5 × 106 cells/0.2 mL. The phosphate-buffered saline-treated group served as the negative control group, and age-matched rats (age-matched controls) were used as the control group. Erectile function, histomorphological analyses, and Western blot were assessed at 1, 6, and 12 weeks after model creation. The distribution of implanted, dual-labeled PSCs was monitored using an in vivo imaging system (IVIS). Implanted cells were further tracked by detection of mKATE fluorescence in histological sections. MAIN OUTCOME MEASURE: The main outcome measure includes intracavernous pressure/mean arterial pressure ratio, neural, endothelial, smooth muscle cell regeneration, mKATE fluorescence, and IVIS imaging. RESULTS: The ratio of intracavernous pressure to mean arterial pressure significantly increased in PSC-injected rats compared with phosphate-buffered saline controls (P < 0.05) at the 6- and 12-week time points, reaching 72% and 68% of the age-matched control group, respectively. Immunofluorescence staining and Western blot analysis showed significant increases in markers of neurons (84.3%), endothelial cells (70.2%), and smooth muscle cells (70.3%) by 6 weeks in treatment groups compared with negative controls. These results were maintained through 12 weeks. IVIS analysis showed luminescence of implanted PSCs in the injected corpora immediately after injection and migration of cells to the sites of injury, including the incision site and periprostatic vasculature by day 1. mKATE fluorescence data revealed the presence of PSCs in the penile corpora and major pelvic ganglion at 1 and 3 days postoperatively. At 7 days, immunofluorescence of penile PSCs had disappeared and was diminished in the major pelvic ganglion. CLINICAL IMPLICATIONS: Placenta-derived stem cells may represent a future "off-the-shelf" treatment to mitigate against development of erectile dysfunction after radical prostatectomy or other forms of pelvic injury. STRENGTH & LIMITATIONS: Single dose injection of PSCs after injury resulted in maximal functional recovery and tissue regeneration at 6 weeks, and the results were maintained through 12 weeks. Strategies to optimize adult stem cell therapy might achieve more effective outcomes for human clinical trials. CONCLUSION: Human PSC therapy effectively restores the erectile tissue and function in this animal model. Thus, PSC therapy may provide an attractive modality to lessen the incidence of erectile dysfunction after pelvic neurovascular injury. Further improvement in tissue regeneration and functional recovery may be possible using multiple injections or systemic introduction of stem cells. Gu X, Thakker PU, Matz EL, et al. Dynamic Changes in Erectile Function and Histological Architecture After Intracorporal Injection of Human Placental Stem Cells in a Pelvic Neurovascular Injury Rat Model. J Sex Med 2020;17:400-411.

Encapsulation of Mesenchymal Stem Cells in 3D Ovarian Cell Constructs Promotes Stable and Long-Term Hormone Secretion with Improved Physiological Outcomes in a Syngeneic Rat Model.

Loss of ovarian function (e.g., due to menopause) leads to profound physiological effects in women including changes in sexual function and osteoporosis. Hormone therapies are a known solution, but their use has significantly decreased due to concerns over cardiovascular disease and certain cancers. We recently reported a tissue-engineering strategy for cell hormone therapy (cHT) in which granulosa cells and theca cells are encapsulated to mimic native ovarian follicles. cHT improved physiological outcomes and safety compared to pharmacological hormone therapies in a rat ovariectomy model. However, cHT did not achieve estrogen levels as high as ovary-intact animals. In this report, we examined if hormone secretion from cHT constructs is impacted by incorporation of bone marrow-derived mesenchymal stem cells (BMSC) since these cells contain regulatory factors such as aromatase necessary for estrogen production. Incorporation of BMSCs led to enhanced estrogen secretion in vitro. Moreover, cHT constructs with BMSCs achieved estrogen secretion levels significantly greater than constructs without BMSCs in ovariectomized rats from 70 to 90 days after implantation, while also regulating pituitary hormones. cHT constructs with BMSC ameliorated estrogen deficiency-induced uterine atrophy without hyperplasia. The results indicate that inclusion of BMSC in cHT strategies can improve performance.

A novel decellularized skeletal muscle-derived ECM scaffolding system for in situ muscle regeneration.

The cell-based tissue engineering strategies have gained attention in restoring normal tissue function after skeletal muscle injuries; however, these approaches require a donor tissue biopsy and extensive cell expansion process prior to implantation. In order to avoid this limitation, we developed a novel cell-free muscle-specific scaffolding system that consisted of a skeletal muscle-derived decellularized extracellular matrix (dECM) and a myogenic factor, insulin growth factor-1 (IGF-1). Rheological, morphological, and biological properties of this muscle-specific scaffold (IGF-1/dECM) as well as collagen and dECM scaffolds were examined. The cell viability in all scaffolds had over 90% at 1, 3, and 7 days in culture. The cell proliferation in the IGF-1/dECM was significantly increased when compared with other groups. More importantly, the IGF-1/dECM strongly supported the myogenic differentiation in the scaffold as confirmed by myosin heavy chain (MHC) immunofluorescence. We also investigated the feasibility in a rabbit tibialis anterior (TA) muscle defect model. The IGF-1/dECM had a significantly greater number of myofibers when compared to both collagen and dECM groups at 1 and 2 months after implantation. We demonstrated that this novel muscle-specific scaffolding system could effectively promote the muscle tissue regeneration in situ.

Structure establishment of three-dimensional (3D) cell culture printing model for bladder cancer.

PURPOSE: Two-dimensional (2D) cell culture is a valuable method for cell-based research but can provide unpredictable, misleading data about in vivo responses. In this study, we created a three-dimensional (3D) cell culture environment to mimic tumor characteristics and cell-cell interactions to better characterize the tumor formation response to chemotherapy. MATERIALS AND METHODS: We fabricated the 3D cell culture samples using a 3D cell bio printer and the bladder cancer cell line 5637. T24 cells were used for 2D cell culture. Then, rapamycin and Bacillus Calmette-Guérin (BCG) were used to examine their cancer inhibition effects using the two bladder cancer cell lines. Cell-cell interaction was measured by measuring e-cadherin and n-cadherin secreted via the epithelial-mesenchymal transition (EMT). RESULTS: We constructed a 3D cell scaffold using gelatin methacryloyl (GelMA) and compared cell survival in 3D and 2D cell cultures. 3D cell cultures showed higher cancer cell proliferation rates than 2D cell cultures, and the 3D cell culture environment showed higher cell-to-cell interactions through the secretion of E-cadherin and N-cadherin. Assessment of the effects of drugs for bladder cancer such as rapamycin and BCG showed that the effect in the 2D cell culture environment was more exaggerated than that in the 3D cell culture environment. CONCLUSIONS: We fabricated 3D scaffolds with bladder cancer cells using a 3D bio printer, and the 3D scaffolds were similar to bladder cancer tissue. This technique can be used to create a cancer cell-like environment for a drug screening platform.

Controlled Delivery of Stem Cell-Derived Trophic Factors Accelerates Kidney Repair After Renal Ischemia-Reperfusion Injury in Rats.

Renal disease is a worldwide health issue. Besides transplantation, current therapies revolve around dialysis, which only delays disease progression but cannot replace other renal functions, such as synthesizing erythropoietin. To address these limitations, cell-based approaches have been proposed to restore damaged kidneys as an alternative to current therapies. Recent studies have shown that stem cell-derived secretomes can enhance tissue regeneration. However, many growth factors undergo rapid degradation when they are injected into the body in a soluble form. Efficient delivery and controlled release of secreting factors at the sites of injury would improve the efficacy in tissue regeneration. Herein, we developed a gel-based delivery system for controlled delivery of trophic factors in the conditioned medium (CM) secreted from human placental stem cells (HPSCs) and evaluated the effect of trophic factors on renal regeneration. CM treatment significantly enhanced cell proliferation and survival in vitro. Platelet-rich plasma (PRP) was used as a delivery vehicle for CM. Analysis of the release kinetics demonstrated that CM delivery through the PRP gel resulted in a controlled release of the factors both in vitro and in vivo. In an acute kidney injury model in rats, functional and structural analysis showed that CM delivery using the PRP gel system into the injured kidney minimized renal tissue damage, leading to a more rapid functional recovery when compared with saline, CM, or vehicle only injection groups. These results suggest that controlled delivery of HPSC-derived trophic factors may provide efficient repair of renal tissue injury. Stem Cells Translational Medicine 2019;8:959&970.

Use of uniformly sized muscle fiber fragments for restoration of muscle tissue function.

Treatment of extensive muscle loss due to traumatic injury, congenital defects, or tumor ablations is clinically challenging. The current treatment standard is grafting of autologous muscle flaps; however, significant donor site morbidity and graft tissue availability remain a problem. Alternatively, muscle fiber therapy has been attempted to treat muscle injury by transplanting single fibers into the defect site. However, irregularly organized long fibers resulted in low survivability due to delay in vascular and neural integration, thus limiting the therapeutic efficacy. Therefore, no effective method is available to permanently restore extensive muscle injuries. To address the current limitations, we developed a novel method that produces uniformly sized native muscle fiber fragments (MFFs) for muscle transplantation. We hypothesized that fragmentation of muscle fibers into small and uniformly sized fragments would allow for rapid reassembly and efficient engraftment within the defect site, resulting in accelerated recovery of muscle function. Our results demonstrate that the processed MFFs have a dimension of approximately 100 µm and contain living muscle cells on extracellular matrices. In preclinical animal studies using volumetric defect and urinary incontinence models, histological and functional analyses confirmed that the transplanted MFFs into the injury sites were able to effectively integrate with host muscle tissue, vascular, and neural systems, which resulted in significant improvement of muscle function and mass. These results indicate that the MFF technology platform is a promising therapeutic option for the restoration of muscle function and can be applied to various muscle defect and injury cases.

Kidney regeneration with biomimetic vascular scaffolds based on vascular corrosion casts.

We have developed a biomimetic renal vascular scaffold based on a vascular corrosion casting technique. This study evaluated the feasibility of using this novel biomimetic scaffold for kidney regeneration in a rat kidney cortical defect model. Vascular corrosion casts were prepared from normal rat kidneys by perfusion with 10% polycaprolactone (PCL) solution, followed by tissue digestion. The corrosion PCL cast was coated with collagen, and PCL was removed from within the collagen coating, leaving only a hollow collagen-based biomimetic vascular scaffold. The fabricated scaffolds were pre-vascularized with MS1 endothelial cell coating, incorporated into 3D renal constructs, and subsequently implanted either with or without human renal cells in the renal cortex of nude rats. The implanted collagen-based vascular scaffold was easily identified and integrated into native kidney tissue. The biomimetic vascular scaffold coated with endothelial cells (MS1) showed significantly enhanced vascularization, as compared to the uncoated scaffold and hydrogel only groups (P < 0.001). Along with the improved vascularization effects, the MS1-coated scaffolds showed a significant renal cell infiltration from the neighboring host tissue, as compared to the other groups (P < 0.05). Moreover, addition of human renal cells to the MS1-coated scaffold resulted in further enhancement of vascularization and tubular structure regeneration within the implanted constructs. The biomimetic collagen vascular scaffolds coated with endothelial cells are able to enhance vascularization and facilitate the formation of renal tubules after 14 days when combined with human renal cells. This study shows the feasibility of bioengineering vascularized functional renal tissues for kidney regeneration. STATEMENT OF SIGNIFICANCE: Vascularization is one of the major hurdles affecting the survival and integration of implanted three-dimensional tissue constructs in vivo. A novel, biomimetic, collagen-based vascular scaffold that is structurally identical to native kidney tissue was developed and tested. This biomimetic vascularized scaffold system facilitates the development of new vessels and renal cell viability in vivo when implanted in a partial renal defect. The use of this scaffold system could address the challenges associated with vascularization, and may be an ideal treatment strategy for partial augmentation of renal function in patients with chronic kidney disease.

Effect of Human Amniotic Fluid Stem Cells on Kidney Function in a Model of Chronic Kidney Disease.

Kidney disease is a major medical problem globally. Chronic kidney disease (CKD) is a progressive loss of kidney function. It causes accumulation of waste and fluid in the body, eventually resulting in kidney failure as well as damaging other organs. Although dialysis and kidney transplantation have been used as primary treatments for renal disease, dialysis does not restore full renal function, and there is a shortage of donor kidneys for transplantation. Recent advances in cell-based therapies have offered a means to augment and restore renal function. Various types of cells have been tested to evaluate their therapeutic effects on injured kidneys. Among various types of cells, amniotic fluid stem cells (AFSCs) share advantages of both embryonic and adult stem cells, such as pluripotent activity, remarkable plasticity, and immunomodulatory effects, which may allow their future therapeutic use as an "off-the-shelf" cell source. AFSC presents advantages of both conventional pluripotent and adult stem cells, such as pluripotent activity, remarkable plasticity, and immunomodulatory effects. This study demonstrates that administration of human-derived AFSC facilitates functional and structural improvement in a rat model of CKD, and suggests that cell therapy with AFSC has potential as a therapeutic strategy to recover renal function in patients with CKD. Impact Statement Patients with chronic kidney disease (CKD) have limited treatment options, and renal transplantation is the only definitive treatment method that restores kidney function. However, challenges associated with transplantation, including donor organ shortage, rejection, and life-long immunosuppression, remain a problem. Recently, stem cell-based therapies have been proposed as an alternative approach to augment and restore renal function. In this study, we used human-derived amniotic fluid stem cells (AFSCs) to treat CKD in a rat model and demonstrated that AFSC treatment facilitated positive effects in terms of improvements of renal function.

Bioactive Compounds for the Treatment of Renal Disease.

Kidney diseases including acute kidney injury and chronic kidney disease are among the largest health issues worldwide. Dialysis and kidney transplantation can replace a significant portion of renal function, however these treatments still have limitations. To overcome these shortcomings, a variety of innovative efforts have been introduced, including cell-based therapies. During the past decades, advances have been made in the stem cell and developmental biology, and tissue engineering. As part of such efforts, studies on renal cell therapy and artificial kidney developments have been conducted, and multiple therapeutic interventions have shown promise in the pre-clinical and clinical settings. More recently, therapeutic cell-secreting secretomes have emerged as a potential alternative to cell-based approaches. This approach involves the use of renotropic factors, such as growth factors and cytokines, that are produced by cells and these factors have shown effectiveness in facilitating kidney function recovery. This review focuses on the renotropic functions of bioactive compounds that provide protective and regenerative effects for kidney tissue repair, based on the available data in the literature.

3D Bioprinted Human Skeletal Muscle Constructs for Muscle Function Restoration.

A bioengineered skeletal muscle tissue as an alternative for autologous tissue flaps, which mimics the structural and functional characteristics of the native tissue, is needed for reconstructive surgery. Rapid progress in the cell-based tissue engineering principle has enabled in vitro creation of cellularized muscle-like constructs; however, the current fabrication methods are still limited to build a three-dimensional (3D) muscle construct with a highly viable, organized cellular structure with the potential for a future human trial. Here, we applied 3D bioprinting strategy to fabricate an implantable, bioengineered skeletal muscle tissue composed of human primary muscle progenitor cells (hMPCs). The bioprinted skeletal muscle tissue showed a highly organized multi-layered muscle bundle made by viable, densely packed, and aligned myofiber-like structures. Our in vivo study presented that the bioprinted muscle constructs reached 82% of functional recovery in a rodent model of tibialis anterior (TA) muscle defect at 8 weeks of post-implantation. In addition, histological and immunohistological examinations indicated that the bioprinted muscle constructs were well integrated with host vascular and neural networks. We demonstrated the potential of the use of the 3D bioprinted skeletal muscle with a spatially organized structure that can reconstruct the extensive muscle defects.

In Situ Tissue Regeneration of Renal Tissue Induced by Collagen Hydrogel Injection.

Host stem/progenitor cells can be mobilized and recruited to a target location using biomaterials, and these cells may be used for in situ tissue regeneration. The objective of this study was to investigate whether host biologic resources could be used to regenerate renal tissue in situ. Collagen hydrogel was injected into the kidneys of normal mice, and rat kidneys that had sustained ischemia/reperfusion injury. After injection, the kidneys of both animal models were examined up to 4 weeks for host tissue response. The infiltrating host cells present within the injection regions expressed renal stem/progenitor cell markers, PAX-2, CD24, and CD133, as well as mesenchymal stem cell marker, CD44. The regenerated renal structures were identified by immunohistochemistry for renal cell specific markers, including synaptopodin and CD31 for glomeruli and cytokeratin and neprilysin for tubules. Quantitatively, the number of glomeruli found in the injected regions was significantly higher when compared to normal regions of renal cortex. This phenomenon occurred in normal and ischemic injured kidneys. Furthermore, the renal function after ischemia/reperfusion injury was recovered after collagen hydrogel injection. These results demonstrate that introduction of biomaterials into the kidney is able to facilitate the regeneration of glomerular and tubular structures in normal and injured kidneys. Such an approach has the potential to become a simple and effective treatment for patients with renal failure. Stem Cells Translational Medicine 2018;7:241-250.

In vivo transplantation of 3D encapsulated ovarian constructs in rats corrects abnormalities of ovarian failure.

Safe clinical hormone replacement (HR) will likely become increasingly important in the growing populations of aged women and cancer patients undergoing treatments that ablate the ovaries. Cell-based HRT (cHRT) is an alternative approach that may allow certain physiological outcomes to be achieved with lower circulating hormone levels than pharmacological means due to participation of cells in the hypothalamus-pituitary-ovary feedback control loop. Here we describe the in vivo performance of 3D bioengineered ovarian constructs that recapitulate native cell-cell interactions between ovarian granulosa and theca cells as an approach to cHRT. The constructs are fabricated using either Ca++ or Sr++ to crosslink alginate. Following implantation in ovariectomized (ovx) rats, the Sr++-cross-linked constructs achieve stable secretion of hormones during 90 days of study. Further, we show these constructs with isogeneic cells to be effective in ameliorating adverse effects of hormone deficiency, including bone health, uterine health, and body composition in this rat model.