[Modified QuEChERS method combined with ultra performance liquid chromatography-tandem mass spectrometry for detection of cyclopiazonic acid in feeds].

Mycotoxins are toxic secondary metabolites produced by fungal species that can cause acute, subacute, and chronic toxicity in humans and animals. Thus, these toxins pose a significant threat to health and safety. Owing to the lack of effective antimold measures in the agricultural industry, feed ingredients such as corn, peanuts, wheat, barley, millet, nuts, oily feed, forage, and their byproducts are prone to mold and mycotoxin contamination, which can affect animal production, product quality, and safety. Cyclopiazonic acid (CPA), which is mainly biosynthesized from mevalonate, tryptophan, and diacetate units, is a myotoxic secondary metabolite produced by Penicillium and Aspergillus fungi. CPA is widely present as a copollutant with aflatoxins in various crops. Compared with some common mycotoxins such as aflatoxins, fumonisins, ochratoxins, zearalenones, and their metabolites, CPA has not been well investigated. In the United States, a survey showed that 51% of corn and 90% of peanut samples contained CPA, with a maximum level of 2.9 mg/kg. In Europe, CPA was found in Penicillium-contaminated cheeses as high as 4.0 mg/kg. Some studies have shown that CPA can cause irreversible damage to organs such as the liver and spleen in mice. Therefore, the establishment of a rapid and efficient analytical method for CPA is of great significance for the risk assessment of CPA in feeds, the development of standard limits, and the protection of feed product quality and safety. The QuEChERS method, a sample pretreatment method that is fast, simple, cheap, effective, and safe, is widely used in the analysis of pesticide residues in food. In this study, a modified QuEChERS method combined with ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was used to determine CPA levels in feeds. The chromatographic separation and MS detection of CPA as well as the key factors affecting the extraction efficiency of CPA, including the type of extraction solvent, type of inorganic salt, and type and dosage of adsorbent, were optimized in detail. During the optimization of the chromatographic-separation step, the acid and salt concentrations of the mobile phase affected the separation and detection of CPA. During the optimization of the QuEChERS method, the addition of a certain amount of acetic acid improved the extraction efficiency of CPA because of its acidic nature; in addition, GCB and PSA significantly adsorbed CPA from the feed extract. Under optimal conditions, the CPA in the feed sample (1.0 g) was extracted with 2 mL of water and 4 mL of acetonitrile (ACN) containing 0.5% acetic acid. After salting out with 0.4 g of NaCl and 1.6 g of MgSO4, 1 mL of the ACN supernatant was purified by dispersive solid-phase extraction using 150 mg of MgSO4 and 50 mg of C18 and analyzed by UPLC-MS/MS. The sample was separated on a Waters HSS T3 column (100 mm×2.1 mm, 1.8 µm) using 2 mmol/L ammonium acetate aqueous solution with 0.5% formic acid and ACN as the mobile phases and then analyzed by positive electrospray ionization in multiple reaction monitoring mode. CPA exhibited good linearity in the range of 2-200 ng/mL, with a high correlation coefficient (r=0.9995). The limits of detection and quantification of CPA, which were calculated as 3 and 10 times the signal-to-noise ratio, respectively, were 0.6 and 2.0 µg/kg, respectively. The average recoveries in feed samples spiked with 10, 100, and 500 µg/kg CPA ranged from 70.1% to 78.5%, with an intra-day precision of less than 5.8% and an inter-day precision of less than 7.2%, indicating the good accuracy and precision of the proposed method. Finally, the modified QuEChERS-UPLC-MS/MS method was applied to the analysis of CPA in 10 feed samples obtained from Wuhan market. The analysis results indicated that the developed method has good applicability for CPA analysis in feed samples. In summary, an improved QuEChERS method was applied to the extraction and purification of CPA from feeds for the first time; this method provides a suitable analytical method for the risk monitoring, assessment, and standard-limit setting of CPA in feed samples.

A boronic acid-modified C60 derivatization reagent for the rapid detection of 3-monochloropropane-1,2-diol using matrix-assisted laser desorption/ionization-mass spectrometry.

RATIONALE: 3-Monochloropropane-1,2-diol (3-MCPD) is a well-known contaminant formed in food thermal processing, which could be found in a variety of foodstuffs. Due to its potential carcinogenicity, it was essential to quickly develop a rapid and high-throughput analytical method to monitor 3-MCPD in foodstuffs, which is described in this study. METHODS: 3-MCPD was extracted from foodstuffs and then was derivatized with a boronic acid-modified C60 (B-C60 ) through the boronic acid-diol reaction. Microwave heating was used to accelerate the derivatization reaction. Mass spectrometry (MS) analysis was conducted using matrix-assisted laser desorption/ionization-MS (MALDI-MS). The application of the method was validated using various smoked food samples. RESULTS: The chemical derivatization of 3-MCPD with B-C60 enabled the addition of a C60 -tag to 3-MCPD. High-throughput analysis of the sample within 0.5 h was realized. A good linear range from 0.02 to 1.5 µg mL-1 for 3-MCPD was obtained, with a detection limit of 0.005 µg mL-1 . The recoveries in spiked foodstuffs ranged from 85.4% to 115.1% with relative standard deviations of 2.0%-14.2%. This method was successfully applied to detect 3-MCPD in smoked foodstuffs. CONCLUSIONS: A quantitative method was developed for the detection of 3-MCPD in foodstuffs using B-C60 derivatization combined with MALDI-MS strategy. This proposed method may serve as a potential platform for the rapid and high-throughput analysis of 3-MCPD in foodstuffs for the purpose of food safety control.

Development of C60-based labeling reagents for the determination of low-molecular-weight compounds by matrix assisted laser desorption ionization mass spectrometry (II): Determination of thiols in human serum.

Perturbation of thiol homeostasis in biological fluids are thought to be associated with several diseases, and reliable analytical methods for the determination of low molecular weight (LMW) thiols in human plasma or serum are thus required. In this study, a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) method is described for high throughput determination of four LMW thiols (glutathione, cysteine, homocysteine and cysteinylglycine) in human serum. It is based on the use of a bromoacetyl functionalized C60 (Br-C60) as a derivatization reagent to label thiols. The Br-C60 labeling can add an 832-Da tag to thiols, which moves thiol signals to high mass region and effectively avoids the signal interference generated by the traditional MALDI matrix below 800 Da. The labeling can be completed within 5 min under microwave-assisted condition. Thereby, the Br-C60 labeling based MALDI-TOF MS analytical method can achieve high throughput analysis of LMW thiols in serum. Good linearities of the method for the thiols in human serum were obtained in the range of 0.5-500.0 µM with correlation coefficient (R) greater than 0.9960. The limit of detection is in the range of 0.07-0.18 µM for the investigated thiols in human serum with relative standard deviations of lower than 13.5% and recoveries ranging from 81.9 to 117.1%. Using the method, four thiols in microliter serum samples of breast cancer (BC) patients were determined. The result showed that the contents of the four thiols in BC serum samples significantly changed compared to the healthy control (HC).

Nickel Oxide Nanoparticle-Deposited Silica Composite Solid-Phase Extraction for Benzimidazole Residue Analysis in Milk and Eggs by Liquid Chromatography-Mass Spectrometry.

A novel nickel oxide nanoparticle-deposited silica (SiO2@NiO) composite was prepared via liquid-phase deposition (LPD) and then employed as a solid-phase extraction (SPE) sorbent. When the SPE was coupled with liquid chromatography-electrospray ionization mass spectrometry (LC-ESI/MS) analysis, an analytical platform for the sensitive determination of benzimidazole residues in egg and milk was established. The limits of detection of nine benzimidazoles were in the range of 0.8-2.2 ng/mL in milk and 0.3-2.1 ng/g in eggs, respectively, which was 5-10 times superior to the methods with other adsorbents for SPE. The recoveries of nine benzimidazoles spiked in milk and egg ranged from 70.8 to 118.7%, with relative standard deviations (RSDs) being less than 18.9%. This work presented the excellent extraction performance of NiO on benzimidazoles for the first time, and the applicability of the LPD technique used as sorbents for trace analysis in complex matrices was also demonstrated.

Profiling of aldehyde-containing compounds by stable isotope labelling-assisted mass spectrometry analysis.

We developed a strategy for non-targeted profiling of aldehyde-containing compounds by stable isotope labelling in combination with liquid chromatography-double neutral loss scan-mass spectrometry (SIL-LC-DNLS-MS) analysis. A pair of stable isotope labelling reagents (4-(2-(trimethylammonio)ethoxy)benzenaminium halide, 4-APC and d4-4-(2-(trimethylammonio)ethoxy)benzenaminium halide, 4-APC-d4) that can selectively label aldehyde-containing compounds were synthesized. The 4-APC and 4-APC-d4 labelled compounds were capable of generating two characteristic neutral fragments of 87 Da and 91 Da, respectively, under collision induced dissociation (CID). Therefore, double neutral loss scans were carried out simultaneously to record the signals of the potential aldehyde-containing compounds. In this respect, the aldehyde-containing compounds from two samples labelled with 4-APC and 4-APC-d4 were ionized at the same time but recorded separately by mass spectrometry. The peak pairs with characteristic mass differences (n × 4 Da) can be readily extracted from the DNLS spectra and assigned as potential aldehyde-containing candidates, which facilitates the identification of the target aldehydes. 4-APC and 4-APC-d4 labelling also dramatically increased detection sensitivities of the derivatives. Using the SIL-LC-DNLS-MS strategy, we successfully profiled the aldehyde-containing compounds in human urine and white wine. Our results showed that 16 and 19 potential aldehyde-containing compounds were discovered in human urine and white wine, respectively. In addition, 5 and 4 aldehyde-containing compounds in human urine and white wine were further identified by comparison with aldehyde standards. Altogether, SIL-LC-DNLS-MS demonstrated to be a promising approach in the identification and relative quantification of aldehyde-containing compounds from complex samples.

Use of Pollen Solid-Phase Extraction for the Determination of trans-Resveratrol in Peanut Oils.

In this study, a simple and convenient method for the determination of trans-resveratrol (TRA) in peanut oils based on pollen grain solid-phase extraction (SPE) was developed. Pollen grains were used as normal-phase SPE sorbent to separate TRA from peanut oils for the first time. As a naturally occurring material, pollen grains exhibited an excellent adsorption capacity for polyphenolic compounds due to their particular functional structures such as hydroxyl groups, saturated and unsaturated aliphatic chains with aromatics. Their stable compositions as well as adequate particle size (30-40 µm) also make them suitable for SPE. Several parameters influencing extraction performance were investigated. Coupled with high-performance liquid chromatography-ultraviolet detection (HPLC-UV), a green purification method for fast determination of TRA in peanut oils using pollen grain cartridges as sorbents was established. The linearity range of the proposed method was 10-2500 ng · g(-1) with a satisfactory correlation coefficient (r(2)) of 0.9999. The limit of detection (LOD) for TRA in peanut oils was 2.7 ng · g(-1), and the recoveries in spiked oil samples were from 70.2% to 98.4% with the relative standard deviations (RSDs) less than 4.9% (intraday) and 5.2% (interday). This method was successfully applied to the analysis of TRA in several peanut oils with different brands from local market as well as other kinds of vegetable oils.

Construction of a portable sample preparation device with a magnetic poly(methacrylic acid-co-ethylene dimethacrylate) monolith as the extraction medium and its application in the enrichment of UV filters in water samples.

A portable sample preparation device with a magnetic polymer monolith as the extraction medium was constructed. The monolith was synthesized by polymerizing methacrylic acid and ethylene dimethacrylate around a cylindrical magnet. In this way, the monolith with a magnetic core could be readily attached to the extraction device by magnetism. The constructed device was evaluated for the enrichment of UV filters in water samples, followed by high-performance liquid chromatographic analysis. The extraction efficiency for the targets was satisfactory with no matrix interference. Good linearities were obtained for the UV filters with the correlation coefficients >0.9986. The limits of detection and quantification for the UV filters were 0.3-0.8 and 1.0-2.4 ng/mL, respectively. The recoveries of the UV filters from the spiked water samples at the concentration of 100 ng/mL were 95.3-101.7%, with relative standard deviations <10%. Accordingly, the proposed portable device was demonstrated to be suitable for on-site simultaneous sampling, purification, and preconcentration within a single step.

Dispersive microextraction based on "magnetic water" coupled to gas chromatography/mass spectrometry for the fast determination of organophosphorus pesticides in cold-pressed vegetable oils.

This article presents a novel application of dispersive microextraction based on "magnetic water" (m-water) for the purification of organophosphorus pesticides (methamidophos, omethoate, monocrotophos) from cold-pressed vegetable oils. In the present study, a trace amount of water (extractant) was adsorbed on bare Fe3O4 by hydrophilic interaction to form m-water. Rapid extraction can be achieved while the m-water is dispersed in the sample solution with the aid of a vigorous vortex. After extraction, the analyte-adsorbed m-water can be readily isolated from the sample solution by a magnet, which could greatly simplify the operation and reduce the whole pretreatment time. Several parameters affecting the extraction efficiency were investigated, and under the optimized conditions, a simple and effective method for pesticide analysis was established by coupling with gas chromatography/mass spectrometry (GC/MS). The linearity range of the proposed method was 2-100 ng/g with satisfactory correlation coefficients (R) of 0.9997-0.9998, and the limits of quantification (LOQ) for the target compounds were in the range of 0.70-1.27 ng/g. In addition, the reproducibility was obtained by evaluating the intra- and interday precisions with relative standard deviations (RSDs) less than 7.2% and 6.5%, respectively. Finally, the established "magnetic water" microextraction method was successfully applied for the determination of pesticide residues in several kinds of cold-pressed vegetable oils.

Quick, easy, cheap, effective, rugged and safe method with magnetic graphitized carbon black and primary secondary amine as adsorbent and its application in pesticide residue analysis.

By using magnetic graphitized carbon black and primary secondary amine (GCB/PSA/MNPs) as adsorbent, a modified quick, easy, cheap, effective, rugged and safe (QuEChERS) method was proposed for pesticide residue analysis in vegetables. The magnetic adsorbent was fabricated via simple co-mixing method based on an "aggregate warp" mechanism. To achieve the optimum conditions of modified QuEChERS toward target analytes, several parameters, including the composition of analyte protectants and the amount of the adsorbents were investigated. Under the optimized conditions, a simple, rapid and effective method for the determination of 10 pesticide residues in vegetables was established by coupling modified QuEChERS to gas chromatography/mass spectrometry analysis. The detection limits of the proposed method for 10 pesticides ranged from 0.39 to 8.6ng/g. Good linearity (R value≥0.990) was achieved at concentration levels of 10-200ng/g, and acceptable method reproducibility was found as intra- and inter-day precisions, yielding the relative standard deviations less than 10.7% and 13.4%, respectively. The recoveries were in the range of 69.9-125.0% at different concentrations for real samples. Compared with the reported methods for the determination of a large number of samples, the proposed method has the advantage of less time-consuming in clean-up procedure.

Facile preparation of organic-silica hybrid monolith for capillary hydrophilic liquid chromatography based on "thiol-ene" click chemistry.

In this work, a one-step approach to facile preparation of organic-inorganic hybrid monoliths was successfully developed. After vinyl-end organic monomers and azobisisobutyronitrile (AIBN) were mixed with hydrolyzed tetramethoxysilane (TMOS) and 3-mercaptopropyltrimethoxysilane (MPTMS), the homogeneous mixture was introduced into a fused-silica capillary for simultaneous polycondensation and "thiol-ene" click reaction to form the organic-silica hybrid monoliths. By employing this strategy, two types of organic-silica hybrid monoliths with positively charged quaternary ammonium and amide groups were prepared, respectively. The functional groups were successfully introduced onto the monoliths during the sol-gel process with "thiol-ene" click reaction, which was demonstrated by ζ-potential assessment, energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR) spectroscopy. The porous structure of the prepared monolithic columns was examined by scanning electron microscopy (SEM), nitrogen adsorption-desorption measurement, and mercury intrusion porosimetry. These results indicate the prepared organic-silica hybrid monoliths possess homogeneous column bed, large specific surface area, good mechanical stability, and excellent permeability. The prepared monolithic columns were then applied for anion-exchange/hydrophilic interaction liquid chromatography. Different types of analytes, including benzoic acids, inorganic ions, nucleosides, and nucleotides, were well separated with high column efficiency around 80,000-130,000 plates/m. Taken together, we present a facile and universal strategy to prepare organic-silica hybrid monoliths with a variety of organic monomers using one-step approach.

Dispersive microextraction based on water-coated Fe3O4 followed by gas chromatography-mass spectrometry for determination of 3-monochloropropane-1,2-diol in edible oils.

In the present work, we developed a novel dispersive microextraction technique by combining the advantages of liquid-phase microextraction (LPME) and magnetic solid-phase extraction (MSPE). In this method, trace amount of water directly absorbed on bare Fe3O4 to form water-coated Fe3O4 (W-Fe3O4) and rapid extraction can be achieved while W-Fe3O4 dispersed in the sample solution. The analyte adsorbed W-Fe3O4 can be easily collected and isolated from sample solution by application of a magnet. It was worth noting that in the proposed method water was used as extractant and Fe3O4 served as the supporter and retriever of water. The performance of the method was evaluated by extraction of 3-monochloropropane-1,2-diol (3-MCPD) from edible oils. The extracted 3-MCPD was then derived by a silylanization reagent (1-trimethylsilylimidazole) before gas chromatography-mass spectrometry (GC-MS) analysis. Several parameters that affected the extraction and derivatization efficiency were investigated. Our results showed that the limit of detection for 3-MCPD was 1.1 ng/g. The recoveries in spiked oil samples were in the range of 70.0-104.9% with the RSDs less than 5.6% (intra-day) and 6.4% (inter-day). Taken together, the simple, rapid and cost-effective method developed in current study, offers a potential application for the extraction and preconcentration of hydrophilic analytes from complex fatty samples.

Fast microextraction of phthalate acid esters from beverage, environmental water and perfume samples by magnetic multi-walled carbon nanotubes.

In this work, magnetic carbon nanotubes (CNTs) were prepared by mixing the magnetic particles and multi-walled carbon nanotubes dispersed solutions. Due to their excellent adsorption capability towards hydrophobic compounds, the magnetic CNTs were used as adsorbent of magnetic solid-phase extraction (MSPE) to extract phthalate acid esters (PAEs), which are widely used in many consumable products with potential carcinogenic properties. By coupling MSPE with gas chromatography/mass spectrometry (GC/MS), a rapid, sensitive and cost-effective method for the analysis of PAEs was established. Our results showed that the limits of detection (LODs) of 16 PAEs ranged from 4.9 to 38 ng L(-1), which are much lower compared to the previously reported methods. And good linearities of the detection method were obtained with correlation coefficients (R(2)) between 0.9821 and 0.9993. In addition, a satisfying reproducibility was achieved by evaluating the intra- and inter-day precisions with relative standard deviations (RSDs) less than 11.7% and 14.6%, respectively. Finally, the established MSPE-GC/MS method was successfully applied to the determination of PAEs from bottled beverages, tap water and perfume samples. The recoveries of the 16 PAEs from the real samples ranged from 64.6% to 125.6% with the RSDs less than 16.5%. Taken together, the MSPE-GC/MS method developed in current study provides a new option for the detection of PAEs from real samples with complex matrices.

Temperature-response polymer coating for in-tube solid-phase microextraction coupled to high-performance liquid chromatography.

The silica nanoparticle (SiO(2) NP)-deposited capillary fabricated by liquid phase deposition (LPD) was bonded by 3-(triethoxysilyl) propyl methacrylate and then modified with poly(N-isopropylacrylamide) (PNIPAAm) by polymerization. The resulting PNIPAAm modified SiO(2) NP-deposited capillary was applied to in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). To investigate the extraction performance of the prepared capillary, diethylstilbestrol (DES) with moderate polarity was selected as the model analyte. Results demonstrate that PNIPAAm modified SiO(2) NP-deposited capillary exhibited obvious temperature responsive character. Finally, the PNIPAAm modified SiO(2) NP-deposited capillary was applied to the analysis of three synthetical estrogens from milk samples. The detection limit of the method was found to be in the range 1.2-2.2 ng/g, and recovery was 71.7-98.9% with relative standard deviations in the range of 2.8-12.6%.