Concerting magnesium implant degradation facilitates local chemotherapy in tumor-associated bone defect.

Effective management of malignant tumor-induced bone defects remains challenging due to severe systemic side effects, substantial tumor recurrence, and long-lasting bone reconstruction post tumor resection. Magnesium and its alloys have recently emerged in clinics as orthopedics implantable metals but mostly restricted to mechanical devices. Here, by deposition of calcium-based bilayer coating on the surface, a Mg-based composite implant platform is developed with tailored degradation characteristics, simultaneously integrated with chemotherapeutic (Taxol) loading capacity. The delicate modulation of Mg degradation occurring in aqueous environment is observed to play dual roles, not only in eliciting desirable osteoinductivity, but allows for modification of tumor microenvironment (TME) owing to the continuous release of degradation products. Specifically, the sustainable H2 evolution and Ca2+ from the implant is distinguished to cooperate with local Taxol delivery to achieve superior antineoplastic activity through activating Cyt-c pathway to induce mitochondrial dysfunction, which in turn leads to significant tumor-growth inhibition in vivo. In addition, the local chemotherapeutic delivery of the implant minimizes toxicity and side effects, but markedly fosters osteogenesis and bone repair with appropriate structure degradation in rat femoral defect model. Taken together, a promising intraosseous administration strategy with biodegradable Mg-based implants to facilitate tumor-associated bone defect is proposed.

Anatomical Brushite-Coated Mg-Nd-Zn-Zr Alloy Cage Promotes Cervical Fusion: One-Year Results in Goats.

In this study, an anatomical brushite-coated Mg-Nd-Zn-Zr alloy cage was fabricated for cervical fusion in goats. The purpose of this study was to investigate the cervical fusion effect and degradation characteristics of this cage in goats. The Mg-Nd-Zn-Zr alloy cage was fabricated based on anatomical studies, and brushite coating was prepared. Forty-five goats were divided into three groups, 15 in each group, and subjected to C2/3 anterior cervical decompression and fusion with tricortical bone graft, Mg-Nd-Zn-Zr alloy cage, or brushite-coated Mg-Nd-Zn-Zr alloy cage, respectively. Cervical radiographs and computed tomography (CT) were performed 3, 6, and 12 months postoperatively. Blood was collected for biocompatibility analysis and Mg2+ concentration tests. The cervical spine specimens were obtained at 3, 6, and 12 months postoperatively for biomechanical, micro-CT, scanning electron microscopy coupled with energy dispersive spectroscopy, laser ablation-inductively coupled plasma-time-of-flight mass spectrometry, and histological analysis. The liver and kidney tissues were obtained for hematoxylin and eosin staining 12 months after surgery for biosafety analysis. Imaging and histological analysis showed a gradual improvement in interbody fusion over time; the fusion effect of the brushite-coated Mg-Nd-Zn-Zr alloy cage was comparable to that of the tricortical bone graft, and both were superior to that of the Mg-Nd-Zn-Zr alloy cage. Biomechanical testing showed that the brushite-coated Mg-Nd-Zn-Zr alloy cage achieved better stability than the tricortical bone graft at 12 months postoperatively. Micro-CT showed that the brushite coating significantly decreases the corrosion rate of the Mg-Nd-Zn-Zr alloy cage. In vivo degradation analysis showed higher Ca and P deposition in the degradation products of the brushite-coated Mg-Nd-Zn-Zr alloy cage, and no hyperconcentration of Mg was detected. Biocompatibility analysis showed that both cages were safe for cervical fusion surgery in goats. To conclude, the anatomical brushite-coated Mg-Nd-Zn-Zr alloy cage can promote cervical fusion in goats, and the brushite-coated Mg-Nd-Zn-Zr alloy is a potential material for developing absorbable fusion cages.

Smart stimuli-responsive strategies for titanium implant functionalization in bone regeneration and therapeutics.

With the increasing and aging of global population, there is a dramatic rise in the demand for implants or substitutes to rehabilitate bone-related disorders which can considerably decrease quality of life and even endanger lives. Though titanium and its alloys have been applied as the mainstream material to fabricate implants for load-bearing bone defect restoration or temporary internal fixation devices for bone fractures, it is far from rare to encounter failed cases in clinical practice, particularly with pathological factors involved. In recent years, smart stimuli-responsive (SSR) strategies have been conducted to functionalize titanium implants to improve bone regeneration in pathological conditions, such as bacterial infection, chronic inflammation, tumor and diabetes mellitus, etc. SSR implants can exert on-demand therapeutic and/or pro-regenerative effects in response to externally applied stimuli (such as photostimulation, magnetic field, electrical and ultrasound stimulation) or internal pathology-related microenvironment changes (such as decreased pH value, specific enzyme secreted by bacterial and excessive production of reactive oxygen species). This review summarizes recent progress on the material design and fabrication, responsive mechanisms, and in vitro and in vivo evaluations for versatile clinical applications of SSR titanium implants. In addition, currently existing limitations and challenges and further prospective directions of these strategies are also discussed.

Brushite-coated Mg-Nd-Zn-Zr alloy promotes the osteogenesis of vertebral laminae through IGF2/PI3K/AKT signaling pathway.

Biodegradable magnesium (Mg) alloys have been extensively investigated in orthopedic implants due to their suitable mechanical strength and high biocompatibility. However, no studies have reported whether Mg alloys can be used to repair lamina defects, and the biological mechanisms regulating osteogenesis are not fully understood. The present study developed a lamina reconstruction device using our patented biodegradable Mg-Nd-Zn-Zr alloy (JDBM), and brushite (CaHPO4·2H2O, Dicalcium phosphate dihydrate, DCPD) coating was developed on the implant. Through in vitro and in vivo experiments, we evaluated the degradation behavior and biocompatibility of DCPD-JDBM. In addition, we explored the potential molecular mechanisms by which it regulates osteogenesis. In vitro, ion release and cytotoxicity tests revealed that DCPD-JDBM had better corrosion resistance and biocompatibility. We found that DCPD-JDBM extracts could promote MC3T3-E1 osteogenic differentiation via the IGF2/PI3K/AKT pathway. The lamina reconstruction device was implanted on a rat lumbar lamina defect model. Radiographic and histological analysis showed that DCPD-JDBM accelerated the repair of rat lamina defects and exhibited lower degradation rate compared to uncoated JDBM. Immunohistochemical and qRT-PCR results showed that DCPD-JDBM promoted osteogenesis in rat laminae via IGF2/PI3K/AKT pathway. This study shows that DCPD-JDBM is a promising biodegradable Mg-based material with great potential for clinical applications.

Biomimetic Porous Magnesium Alloy Scaffolds Promote the Repair of Osteoporotic Bone Defects in Rats through Activating the Wnt/ß-Catenin Signaling Pathway.

In this study, biomimetic porous magnesium alloy scaffolds were prepared to repair femoral bone defects in ovariectomized osteoporotic rats. The purpose of the study was to investigate the effect of biomimetic porous magnesium alloy scaffolds on repairing osteoporotic bone defects and possible mechanisms. The animal model of osteoporosis was established in female SD rats. Three months later, a bone defect of 3 mm in diameter and 3 mm in depth was created in the lateral condyle of the right femur. The rats were then randomly divided into two groups: an experimental group and a control group. Four weeks after surgery, gross specimens were observed and micro-CT scans were performed. The repair of osteoporotic femoral defects in rats was studied histologically using HE staining, Masson staining, and Goldner staining. The expression of Wnt5a, ß-catenin, and BMP-2 was measured between groups by immunohistochemical staining. The bone defect was repaired better after the application of biomimetic porous magnesium alloy scaffolds. Immunohistochemical results showed significantly higher expression of Wnt5a, ß-catenin, and BMP-2. To conclude, the biomimetic porous magnesium alloy scaffolds proposed in this paper might promote the repair of osteoporotic femoral bone defects in rats possibly through activating the Wnt/ß-catenin signaling pathway.

Efficacy and Safety of Absorb Everolimus-Eluting Bioresorbable Vascular Scaffold in Peripheral Artery Disease: A Single-Arm Meta-Analysis.

PURPOSE: This study aimed to evaluate the benefits and risks of patients with peripheral artery disease (PAD) treated with Absorb everolimus-eluting bioresorbable vascular scaffold (BVS) by analyzing all the published studies on the clinical characteristics of patients with PAD. MATERIALS AND METHODS: PubMed, Embase, and the Cochrane Library were searched for relevant studies. Efficacy, safety, and basic characteristics were analyzed. RESULTS: Four studies were included in meta-analysis, including a total number of 155 patients with PAD. The pooled overall primary patency, freedom from target lesion revascularization (TLR), symptom resolution, and wound healing were 90%, 96%, 94%, and 86%, respectively. The pooled perioperative complication and all-cause mortality were 4% and 9%, respectively. Preoperative total occlusion was detected in 43 of 192 lesions (22%). The mean lesion length was 27.26 mm. In terms of comorbidities, the pooled percentage of hypertension, hyperlipidemia, diabetes mellitus, coronary artery disease, chronic kidney disease history, and smoking were 65%, 74%, 49%, 43%, 20%, and 57%, respectively. CONCLUSION: Among these studies, hypertension, hyperlipidemia, and diabetes mellitus were the most common comorbidities in patients with PAD. The Absorb everolimus-eluting BVS was safe and showed the favorable clinical outcomes in both patency and TLR, especially in infrapopliteal disease with heavy calcification. The conclusions of this meta-analysis still needed to be verified by more relevant studies with more careful design, more rigorous execution, and larger sample size.

The beneficial potential of magnesium-based scaffolds to promote chondrogenesis through controlled Mg2+ release in eliminating the destructive effect of activated macrophages on chondrocytes.

Chondral defects caused by osteoarthritis (OA) are common but difficult to manage due to their limited capacity for self-repair. Further, the activated macrophages induced by OA stimulates chondrocytes degradation and inhibits regeneration, further impeding cartilage repair. Therefore, biomaterials with the potential for blocking vicious cycles between activated macrophages and chondrocytes would be promising for use in the treatment of chondral defects caused by OA. In this study, we fabricated porous Mg-Nd-Zn-Zr alloy (denoted JDBM) scaffolds coated with polydopamine (PDA) and investigated their cytocompatibility and impact on immunoregulation. Mesenchymal stem cells (MSCs) were co-cultured in supernatant from M1-polarized macrophages pretreated with extracts from JDBM scaffolds and the anti-inflammatory effect on the NF-κB pathway and reactive oxygen species (ROS) evaluated. JDBM scaffolds could reduce M1 macrophage numbers, while promoting those of M2 macrophages; recruit MSCs; and enhance chondrogenesis. Furthermore, lipopolysaccharide (LPS)-induced p65 translocation to the nucleus was inhibited by JDBM scaffolds, with ROS production and matrix metalloproteinase (MMP) expression also suppressed. These findings suggest that JDBM scaffolds can both promote chondrogenesis and effectively attenuate local inflammatory responses by transforming macrophages from the M1 to M2 subtype and down-regulating NF-κB signaling. Hence, JDBM scaffolds could promote chondrogenesis under inflammatory microenvironment and represent a promising material for treatment of chondral defects caused by OA.

The effects of alignment and diameter of electrospun fibers on the cellular behaviors and osteogenesis of BMSCs.

Electrospun fiber scaffolds, due to their mimicry of bone extracellular matrix (ECM), have become an important biomaterial widely applied in bone tissue engineering in recent years. While topographic cues of electrospun membranes such as alignment and diameter played vital roles in determining cellular behaviors. Yet few researches about the effects of these two significant parameters on osteogenesis have been reported. Thus, the present work explored the influence of aligned and random poly (L-lactic acid) (PLLA) fiber matrices with diameters of nanoscale (0.6 µm) and microscale (1.2 µm), respectively, on cellular responses of bone marrow mesenchymal stem cells (BMSCs), such as cell adhesion, migration, proliferation and osteogenesis. Our results revealed that aligned nanofibers (AN) could affect cell morphology and promote the migration of BMSCs after 24 h of cell culturing. Besides, AN group was observed to possess excellent biocompatibility and have significantly improved cell growth comparing with random nanofibers. More importantly, in vitro osteogenesis researches including ALP and Alizarin Red S staining, qRT-PCR and immunofluorescence staining demonstrated that BMSCs culturing on AN group exhibited higher osteogenic induction proficiency than that on aligned microfibers (AM) and random fiber substrates (RN and RM). Accordingly, aligned nanofiber scaffolds have greater application potential in bone tissue engineering.

Biodegradable JDBM coating stent has potential to be used in the treatment of benign biliary strictures.

In our previous study, to find out the optimal alloy suitable for biliary surgery, magnesium alloy Jiao Da Bio-magnesium (denoted as JDBM) alloy, Zn-3Cu alloys, and their respective coating (MgF2-PDLLA) products were produced for our research. We found that JDBM seems to be a potential material for clinical biliary stent application due to its uniform degradation and good compatibility. In order to apply the JDBM alloy to treat benign bile duct stricture, our group prepared the bare JDBM and its coating product into finished stents by mesh weaving carving technology and conducted the mechanical property tests, degradation tests and biocompatibility tests. During the mechanical property tests, we found the bare JDBM stent was more suitable than titanium alloy stent when applies to the bile duct, and the coating of the JDBM coating stent has no effect on its mechanical properties. Our in vitro and in vivo experiments revealed that the degradation rate of the JDBM coating stent is lower than that of the JDBM stent, and both stents were biosafe. Thus, there is promise for JDBM coating stents for the treatment of benign biliary strictures.

Targeting Local Osteogenic and Ancillary Cells by Mechanobiologically Optimized Magnesium Scaffolds for Orbital Bone Reconstruction in Canines.

Large-sized orbital bone defects have serious consequences that destroy orbital integrity and result in maxillofacial deformities and vision loss. The treatment of orbital bone defects is currently palliative and not reparative, suggesting an urgent demand for biomaterials that regenerate orbital bones. In this study, via alloying, extrusion and surface modification, we developed mechanobiologically optimized magnesium (Mg) scaffolds (Ca-P-coated Mg-Zn-Gd scaffolds, referred to as Ca-P-Mg) for the orthotopic reconstruction of large-sized orbital bone defects. At 6 months after transplanting the scaffolds to a clinically relevant canine large animal model, large-sized defects were successfully bridged by an abundance of new bone with normal mechanical properties that corresponded to gradual degradation of the implants. The osteogenic and ancillary cells, including vascular endothelial cells and trigeminal neurons, played important roles in this process. The scaffolds robustly enhanced bone marrow mesenchymal stem cell (BMSC) osteogenic differentiation. In addition, the increased angiogenesis including increased ratio of the specific endothelial subtype CD31hi endomucinhi (CD31hiEmcnhi) endothelial cells can facilitate osteogenesis. Furthermore, the scaffolds trigger trigeminal neurons via transient receptor potential vanilloid subtype 1 (Trpv1) to produce the neuropeptide calcitonin gene-related peptide (CGRP), which promotes angiogenesis and osteogenesis. Overall, our investigations revealed the efficacy of Ca-P-Mg scaffolds in healing orbital bone defects and warrant further exploration of these scaffolds for clinical applications.

Comparative assessment of the biocompatibility and degradation behavior of Zn-3Cu and JDBM alloys used for biliary surgery.

This study was designed to investigate the biocompatibility and the degradation behavior of a Zn-3Cu alloy, a Zn-3Cu coating alloy, a Mg-Nd-Zn-Zr (denoted as JDBM) alloy and a JDBM coating alloy to choose the optimal alloy for common bile duct (CBD) surgery. In the in vitro degradation experiments, we observed the surface morphology of the samples and determined the elements of the corrosion products. In the in vitro cytotoxicity experiments, the cell morphology and cytotoxicity were observed and tested. In the in vivo experiments, in addition to analyzing the samples, we also analyzed the variations in serum magnesium, serum creatinine (CREA), blood urea nitrogen (BUN), total bilirubin (TB) and glutamic pyruvic transaminase (GPT). Moreover, important tissue samples from the CBD, liver, kidney and spleen were taken for histological evaluation. The in vitro degradation experiments revealed that the surface corrosion of the JDBM and JDBM coating alloys were more obvious than that of Zn-3Cu and Zn-3Cu coating alloys, and the degradation rate of the JDBM coating alloy was the slowest. The in vitro cytotoxicity assessment showed that the JDBM alloy and JDBM coating alloy extracts were biologically safe for L-929 cells, while the Zn-3Cu alloy and Zn-3Cu coating alloy extracts were harmful to L-929 cells. In the in vivo experiments, neither the JDBM alloy nor the JDBM coating alloy affected the function or morphology of the bile duct, liver, kidney or spleen. Similar to the in vitro degradation behavior, the surface corrosion of the JDBM alloy was more significant than that of the JDBM coating alloy. Our data suggested that the JDBM coating alloy is a safe, biodegradable material for CBD surgery.

The bioeffects of degradable products derived from a biodegradable Mg-based alloy in macrophages via heterophagy.

Biodegradable magnesium alloys are promising candidates for use in biomedical applications. However, degradable particles (DPs) derived from Mg-based alloys have been observed in tissue in proximity to sites of implantation, which might result in unexpected effects. Although previous in vitro studies have found that macrophages can take up DPs, little is known about the potential phagocytic pathway and the mechanism that processes DPs in cells. Additionally, it is necessary to estimate the potential bioeffects of DPs on macrophages. Thus, in this study, DPs were generated from a Mg-2.1Nd-0.2Zn-0.5Zr alloy (JDBM) by an electrochemical method, and then macrophages were incubated with the DPs to reveal the potential impact. The results showed that the cell viability of macrophages decreased in a concentration-dependent manner in the presence of DPs due to effects of an apoptotic pathway. However, the DPs were phagocytosed into the cytoplasm of macrophages and further degraded in phagolysosomes, which comprised lysosomes and phagosomes, by heterophagy instead of autophagy. Furthermore, several pro-inflammatory cytokines in macrophages were upregulated by DPs through the induction of reactive oxygen species (ROS) production. To the best of our knowledge, this is the first study to show that DPs derived from a Mg-based alloy are consistently degraded in phagolysosomes after phagocytosis by macrophages via heterophagy, which results in an inflammatory response owing to ROS overproduction. Thus, our research has increased the knowledge of the metabolism of biodegradable Mg metal, which will contribute to an understanding of the health effects of biodegradable magnesium metal implants used for tissue repair. STATEMENT OF SIGNIFICANCE: Biomedical degradable Mg-based alloys have great promise in applied medicine. Although previous studies have found that macrophages can uptake degradable particles (DPs) in vitro and observed in the sites of implantation in vivoin vivo, few studies have been carried out on the potential bioeffects relationship between DPs and macrophages. In this study, we analyzed the bioeffects of DPs derived from a Mg-based alloy on the macrophages. We illustrated that the DPs were size-dependently engulfed by macrophages via heterophagy and further degraded in the phagolysosome rather than autophagosome. Furthermore, DPs were able to induce a slight inflammatory response in macrophages by inducing ROS production. Thus, our research enhances the knowledge of the interaction between DPs of Mg-based alloy and cells, and offers a new perspective regarding the use of biodegradable alloys.

A Biodegradable Mg-Based Alloy Inhibited the Inflammatory Response of THP-1 Cell-Derived Macrophages Through the TRPM7-PI3K-AKT1 Signaling Axis.

Mg-based alloys might be ideal biomaterials in clinical applications owing to favorable mechanical properties, biodegradability, biocompatibility, and especially their anti-inflammatory properties. However, the precise signaling mechanism underlying the inhibition of inflammation by Mg-based alloys has not been elucidated. Here, we investigated the effects of a Mg-2.1Nd-0.2Zn-0.5Zr alloy (denoted as JDBM) on lipopolysaccharide (LPS)-induced macrophages. THP-1 cell-derived macrophages were cultured on JDBM, Ti-6Al-4V alloy (Ti), 15% extract of JDBM, and 7.5 mM of MgCl2 for 1 h before the addition of LPS for an indicated time; the experiments included negative and positive controls. Our results showed JDBM, extract, and MgCl2 could decrease LPS-induced tumor necrosis factor (TNF) and interleukin (IL)-6 expression. However, there were no morphologic changes in macrophages on Ti or JDBM. Mechanically, extract and MgCl2 downregulated the expression of toll-like receptor (TLR)-4 and MYD88 compared with the positive control and inhibited LPS-induced nuclear factor-kappa B (NF-κB) and mitogen-activated protein kinase (MAPK) signaling pathways by inactivation of the phosphorylation of IKK-α/ß, IKß-α, P65, P38, and JNK. Additionally, the LPS-induced reactive oxygen species (ROS) expression was also decreased by extract and MgCl2. Interestingly, the expression of LPS-induced TNF and IL-6 could be recovered by knocking down TRPM7 of macrophages, in the presence of extract or MgCl2. Mechanically, the activities of AKT and AKT1 were increased by extract or MgCl2 with LPS and were blocked by a PI3K inhibitor, whereas siRNA TRPM7 inhibited only AKT1. Together, our results demonstrated the degradation products of Mg-based alloy, especially magnesium, and resolved inflammation by activation of the TRPM7-PI3K-AKT1 signaling pathway, which may be a potential advantage or target to promote biodegradable Mg-based alloy applications.

Degradation Products of Polydopamine Restrained Inflammatory Response of LPS-Stimulated Macrophages Through Mediation TLR-4-MYD88 Dependent Signaling Pathways by Antioxidant.

Polydopamine (PDA) has a promising application as coating of biomaterials due to its favorable degradability and bioadaptability. However, its bioactivity, such as anti-inflammatory capacity, was still little known. Herein, we investigated whether degradable products of PDA could affect inflammatory response in lipopolysaccharide (LPS)-stimulated human THP-1-derived macrophages. The supernatants containing degradation products of PDA, annotated as PDA extracts, were collected after PDA being immersed in cell culture medium for 3 days. Wherein, the composition of the degradation products was analyzed by HPLC assay. Collected PDA extracts were diluted into 100%, 50%, and 25% of original concentration, respectively, to evaluate their anti-inflammatory ability on LPS-induced macrophages from the expression levels of pro-inflammatory cytokines to associated molecular mechanism. Our results showed that the PDA extracts were mainly composed of dopamine, quinine, and PDA segments. Furthermore, macrophages showed no cytotoxicity after PDA extract treatment with or without LPS, while the release levels of TNF-α and IL-6 by LPS-induced macrophages were decreased in dose-dependent by PDA extract treatment. Additionally, TLR-4 and MYD88 expression in protein and RNA level were downregulated by PDA extracts in LPS-induced macrophages. Similarly, PDA extracts effectively inhibited LPS-induced NF-κB trans-locating into nuclear by inactivation of the phosphorylation of IKK-α/ß and IKß-α. Of note, the production of LPS-induced ROS was reduced by PDA extracts in macrophages, while HO-1 expression, a critical protein of antioxidant signaling pathway, was increased. Based on these results, we proposed a potential mechanism by which degradation products of PDA suppressed inflammation of macrophages via downregulation TLR-4-MYD88-NFκB pathway and simultaneous activation HO-1 pathway, which might be a possible therapeutic target.

A pilot study of a novel biodegradable magnesium alloy airway stent in a rabbit model.

OBJECTIVE: To preliminarily investigate the feasibility of bioabsorption tracheal stenting for the therapeutic application of congenital tracheal stenosis (CTS). STUDY DESIGN: Experimental research. SETTING: Shanghai Children Medical Center, National Children's Medical Center. SUBJECTS AND METHODS: Five kinds of magnesium alloys with different compositions were studied in this paper, a patented Mg-Nd-Zn-Zr alloy series namely JDBM (JiaoDa BioMg) and four Mg-Ca-Zn alloys. The cytotoxicity of alloys was evaluated by the MTS ([3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) assay in rabbit tracheal epithelial cells. Specific magnesium alloys had been immersed in the cell culture medium for 24 h. The tracheal stents that were made of magnesium alloy were implanted into the trachea of New Zealand rabbits and the ablation of the stent was monitored by fiber bronchoscopy. The routine blood examination was conducted prior to and following the stent placement. The rabbits were euthanized following 2-3 months of stenting. H&E staining of the main organs was conducted and the induction of apoptosis of the tracheal tissues was monitored. RESULTS: The cytotoxicity of the JDBM magnesium alloy was mild and lower than the remaining 4 alloys. The stents were placed successfully in five animals. The tracheal stents were successfully placed and gradually biodegradated as monitored by fiber bronchoscopy; no significant systemic inflammatory response was noted. No significant differences in the liver and/or kidney function prior to and following stent placement were noted. H&E staining indicated the absence of pathological changes in the trachea, liver, heart and/or kidney tissues. The apoptotic assay indicated that the apoptosis ratio of the tracheal tissues was comparable between rabbits with and without tracheal stenting. CONCLUSION: The results suggested the feasibility of bioabsorption stents made of biodegradable magnesium alloys using in patients with tracheal stenosis, especially in infants.

In vitro study of the inflammatory cells response to biodegradable Mg-based alloy extract.

Biodegradable Mg-based alloys have shown great potential as bone fixation devices or vascular stents. As implant biomaterials, the foreign body reaction (FBR) is an important issue to be studied, where the inflammatory cells play a key role. Here, we used two inflammatory cell lines i.e. THP-1 cells and THP-1 macrophages, to evaluate the effect of Mg-Nd-Zn-Zr alloy (denoted as JDBM) extracts on cell viability, death modes, cell cycle, phagocytosis, differentiation, migration and inflammatory response. The results showed that high-concentration extract induced necrosis and complete damage of cell function. For middle-concentration extract, cell apoptosis and partially impaired cell function were observed. TNF-α expression of macrophages was up-regulated by co-culture with extract in 20% concentration, but was down-regulated in the same concentration in the presence of LPS stimulation. Interestingly, the production of TNF-α decreased when macrophages were cultured in middle and high concentration extracts independent of LPS. Cell viability was also negatively affected by magnesium ions in JDBM extracts, which was a potential factor affecting cell function. Our results provide new information about the impact of Mg alloy extracts on phenotype of immune cells and the potential mechanism, which should be taken into account prior to clinical applications.

Dual modulation of bone formation and resorption with zoledronic acid-loaded biodegradable magnesium alloy implants improves osteoporotic fracture healing: An in vitro and in vivo study.

Osteoporotic fracture (OPF) remains a major clinical challenge for skeletal regeneration. Impaired osteogenesis and excessive remodeling result in prolonged and poor quality of fracture healing. To augment bone formation and inhibit excessive resorption simultaneously, we constructed a biodegradable magnesium-based implant integrated with the anti-catabolic drug zoledronic acid (ZA); this implant exhibits controllable, sustained release of magnesium degradation products and ZA in vitro. The extracts greatly stimulate the osteogenic differentiation of rat-bone marrow-derived mesenchymal stem cells (rBMSCs), while osteoclastogenesis is inhibited by ZA. Implantation of intramedullary nails to fix femur fracture in ovariectomy-induced osteoporotic rats for up to 12 weeks demonstrates magnesium implants alone can enhance OPF repair through promoting callus formation compared to conventional stainless steel, while the combinatory treatment with local ZA release from implant coating further increases bone regeneration rate and callus size, remarkably improves bone quality and mechanical strength and suppresses osteoclasts and bone remodeling, due to the synergistic effect of both agents. The slow and uniform degradation of the implant ensures a steady decrease in bending force, which meets clinical requirements. In summary, biodegradable magnesium-based implants can locally co-deliver magnesium degradation products and zoledronic acid in a controlled manner, and can be superior alternatives for the reconstruction of osteoporosis-related fracture. STATEMENT OF SIGNIFICANCE: Management of osteoporotic fracture has posed a major challenge in orthopedics, as the imbalance between diminished osteogenesis and excessive bone remodeling often leads to delayed and compromised fracture repair. Among various efforts expended on augmenting osteoporotic fracture healing, herein we reported a new strategy by engineering and utilizing a biodegradable magnesium-based implant integrated with local drug delivery, specifically, zoledronic acid (ZA)-loaded polylactic acid/brushite bilayer coating on a biodegradable Mg-Nd-Zn-Zr alloy (denoted as Mg/ZA/CaP), aiming to combine the favorable properties of Mg and zoledronic acid for simultaneous modulation of bone formation and bone resorption. In vitro and in vivo studies demonstrated its superior treatment efficacy along with adequate degradation. It stimulated new bone formation while suppressing remodeling, ascribed to the local release of magnesium degradation products and zoledronic acid. To our knowledge, the enhanced fracture repair capability of Mg-based implants was for the first time demonstrated in an osteoporotic fracture animal model. This innovative biodegradable Mg-based orthopedic implant presents great potential as a superior alternative to current internal fixation devices for treating osteoporotic fracture.

Macrophage phagocytosis of biomedical Mg alloy degradation products prepared by electrochemical method.

Biomedical Mg alloy is promising for its widespread use clinically. In vitro and in vivo studies showed that the degradation products of biomedical Mg alloy were composed of O, P, Ca, Mg and other alloying elements. However, little is known about the metabolism of the degradation products. In this study, the in vitro macrophage phagocytosis of the degradation products of a biomedical Mg-Nd-Zn-Zr alloy was directly observed. This result affirms the necessity to investigate the long-term fate of Mg alloy degradation products in physiological environments. Besides, an electrochemical method was proposed to prepare enough amount of degradation products in vitro efficiently.

Intermediate analysis of magnesium alloy covered stent for a lateral aneurysm model in the rabbit common carotid artery.

OBJECTIVE: To analyze the outcomes of a magnesium alloy covered stent (MACS) for a lateral aneurysm model in common carotid artery (CCA). METHODS: In 32 rabbits, a MACS (group A, n = 17) or a Willis covered stent (WCS; group B, n = 15) was inserted and the rabbits were sacrificed 1, 3, 6, or 12 months after stenting. Angiography and intravascular ultrasound (IVUS) were performed at 3, 6, and 12 months. Scanning electron microscopy was performed for six stents in each group at 1, 3, and 6 months, and histopathology and histomorphology were conducted at 3 (n = 4), 6 (n = 4), and 12 (n = 12) months. RESULTS: Final angiography showed complete occlusion of the aneurysms in 12 cases. IVUS at 6 and 12 months revealed a significant increase in mean lumen area of the stented CCA in group A and also showed greater mean lumen area in group A than in group B. The endothelialization process was quicker in group A than in group B. CONCLUSION: MACS is effective for occlusion of lateral aneurysms and is superior to WCS in growth of the stented CCA and endothelialization. Further work is needed to make this device available for human use. KEY POINTS: • The MACS is an effective approach for occlusion of a lateral aneurysm. • IVUS showed that the CCA could grow following degradation of the MACS. • The lumen area of the stented CCA was excellent in MACS. • HE staining displayed the degradation of the magnesium alloy stent. • Combination of IVUS and DSA were applied in this study.

Effect of macrophages on in vitro corrosion behavior of magnesium alloy.

The influence of cells on the corrosion behavior of biomedical magnesium alloy is an important but less studied topic, which is helpful for understanding the inconsistent corrosion rates between in vitro and in vivo experiments. In this work, macrophages were directly cultured on Mg-2.1Nd-0.2Zn-0.5Zr (wt %, abbreviated as JDBM) alloy surface for 72 or 168 hours. Macrophages retained good viability and the generation of reactive oxygen species (ROS) was greatly promoted on the alloy. Weight loss, Mg(2+) concentration, and cross-section observation results demonstrated that macrophages accelerated the in vitro corrosion of JDBM. The coverage of cell body did not affect the local thickness of corrosion product layer. The corrosion product layer had a porous inner Mg(OH)2 layer and a dense outer layer mainly composed of O, P, Mg, and Ca. The uniform acceleration of JDBM corrosion was attributed to the omnidirection diffusion of ROS from macrophages. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2476-2487, 2016.