Modification of pea starch using ternary mixtures of natural crosslinking agents: Vanillin-chitosan-betaine and vanillin-gelatin-betaine.

Different methods of starch modification have been proposed to broaden its application. In this study, the effects of ternary mixtures of natural crosslinking agents: chitosan-betaine-vanillin and gelatin-betaine-vanillin on the properties of pea starch were explored. These combinations of substances were selected because they have complementary crosslinking mechanisms. The effects of the ternary crosslinker mixtures on the gelatinization, mechanical properties, thermal stability, and microstructure of pea starch were compared. Both combinations of crosslinkers enhanced the gelatinization viscosity, viscoelasticity, gel hardness, and thermal stability of the pea starch, by an amount that depended on the ratio of the different components in the ternary mixtures. In all cases, the crystal structure of the starch granules disappeared after gelatinization. The modified starch had a more compact and uniform microstructure than the non-modified version, especially when it was crosslinked by vanillin, gelatin, and betaine. The improvement in the gelation properties of the starch were primarily attributed to hydrogen bonding, electrostatic attraction, and Schiff base crosslinking of the various components present. Gelatin enhanced the gel strength more than chitosan, which was probably because of greater hydrogen bonding. Our findings suggest that the properties of starch can be enhanced by adding ternary mixtures of natural crosslinkers.

Effects of frying on the surface oil absorption of wheat, potato, and pea starches.

The effects of structural changes on surface oil absorption characteristics of wheat starch, pea starch and potato starch during frying under different water content (20%, 30%, 40%, 50%) were studied. Fried potato starch with a 40% water content exhibited the highest surface oil content. When the initial moisture content reached 30%, the scattering intensity of the crystal layer structure decreased for wheat and pea starches, while the scattering peak for potato starch completely disappeared. At 40% moisture content, the amorphous phase ratio values for fried potato, wheat and pea starches were 13.50%, 11.78% and 11.24%, respectively, and the nitrogen adsorption capacity of fried starch decreased in turn. These findings that the structure of potato starch was more susceptible to degradation compared to pea starch and wheat starch, resulting in higher surface oil absorbed by potato starch during frying process.

Unlocking the health potential of anthocyanins: a structural insight into their varied biological effects.

Anthocyanins have become increasingly important to the food industry due to their colorant features and many health-promoting activities. Numerous studies have linked anthocyanins to antioxidant, anti-inflammatory, anticarcinogenic properties, as well as protection against heart disease, certain types of cancer, and a reduced risk of diabetes and cognitive disorders. Anthocyanins from various foods may exhibit distinct biological and health-promoting activities owing to their structural diversity. In this review, we have collected and tabulated the key information from various recent published studies focusing on investigating the chemical structure effect of anthocyanins on their stability, antioxidant activities, in vivo fate, and changes in the gut microbiome. This information should be valuable in comprehending the connection between the molecular structure and biological function of anthocyanins, with the potential to enhance their application as both colorants and functional compounds in the food industry.

Impact of pesticide polarity and lipid phase dimensions on the bioaccessibility of pesticides in agricultural produce consumed with model fatty foods.

For most people, the pesticide residues found on agriculture products are the main source of pesticide exposure, which may adversely influence consumer health. The potential health hazard of residual pesticides depends on the nature of the foods they are consumed with. Studies with fat-soluble vitamins and nutraceuticals have shown that their bioaccessibility depends on food matrix composition and structure. We used an in vitro method to investigate the influence of the dimensions of the lipid phase in model fatty foods (emulsified or bulk oil) on the bioaccessibility of various pesticides. Three pesticides that differed in their oil-water partition coefficients were selected: bendiocarb (log P = 1.7), parathion (log P = 3.8), and chlorpyrifos (log P = 5.3). These pesticides were mixed with tomato puree to represent pesticide-treated agricultural products. Three model foods with different oil phase dimensions were used to represent different kinds of food product: small emulsions (d32 = 0.14 µm); large emulsions (d32 = 10 µm); and, bulk oil. Our results showed that the oil droplets underwent extensive changes as they passed through the simulated gastrointestinal tract due to changes in environmental conditions, such as pH, ionic strength, bile salts, and enzyme activities. The initial rate and final amount of lipid hydrolysis decreased with increasing lipid phase dimensions. Pesticide bioaccessibility depended on both the hydrophobicity of the pesticide and the dimensions of the co-ingested lipid droplets. The least hydrophobic pesticide (bendiocarb) had a high bioaccessibility (>95%) that did not depend on lipid phase dimensions. The more hydrophobic pesticides (parathion and chlorpyrifos) has a lower bioaccessibility that increased with decreasing lipid phase dimensions. Our results demonstrate the critical role that food structure plays on the potential uptake of pesticides from agricultural products, like fruits and vegetables.

Impact of Pesticide Type and Emulsion Fat Content on the Bioaccessibility of Pesticides in Natural Products.

There is interest in incorporating nanoemulsions into certain foods and beverages, including dips, dressings, drinks, spreads, and sauces, due to their potentially beneficial attributes. In particular, excipient nanoemulsions can enhance the bioavailability of nutraceuticals in fruit- and vegetable-containing products consumed with them. There is, however, potential for them to also raise the bioavailability of undesirable substances found in these products, such as pesticides. In this research, we studied the impact of excipient nanoemulsions on the bioaccessibility of pesticide-treated tomatoes. We hypothesized that the propensity for nanoemulsions to raise pesticide bioaccessibility would depend on the polarity of the pesticide molecules. Bendiocarb, parathion, and chlorpyrifos were therefore selected because they have Log P values of 1.7, 3.8, and 5.3, respectively. Nanoemulsions with different oil contents (0%, 4%, and 8%) were fabricated to study their impact on pesticide uptake. In the absence of oil, the bioaccessibility increased with increasing pesticide polarity (decreasing Log P): bendiocarb (92.9%) > parathion (16.4%) > chlorpyrifos (2.8%). Bendiocarb bioaccessibility did not depend on the oil content of the nanoemulsions, which was attributed to its relatively high water-solubility. Conversely, the bioaccessibility of the more hydrophobic pesticides (parathion and chlorpyrifos) increased with increasing oil content. For instance, for chlorpyrifos, the bioaccessibility was 2.8%, 47.0%, and 70.7% at 0%, 4%, and 8% oil content, respectively. Our findings have repercussions for the utilization of nanoemulsions as excipient foods in products that may have high levels of undesirable non-polar substances, such as pesticides.

Effect of pullulan on oil absorption and structural organization of native maize starch during frying.

The oil-absorption behavior of native maize starch (NMS) during frying was investigated in the presence or absence of pullulan (PUL) using a LF-NMR method. The morphology, long-range order, short-range order, and thermal properties of fried NMS-PUL mixtures were further evaluated using SEM, XRD, ATR-FTIR, and DSC, respectively. Pullulan addition significantly reduced the oil content of the fried starch samples: 0.395, 0.310, 0.274, and 0.257 g/g in NMS with addition of 0, 1, 3, and 5% PUL, respectively (p < 0.05). SEM analysis showed that the intact granular morphology of the starch granules was preserved upon addition of pullulan. The XRD, FTIR, and DSC results showed that pullulan protected both the short-range double helices and long-range crystalline structure of the granules during frying. As a result, fried NMS-PUL mixtures were denser than fried NMS, thus inhibiting oil absorption during frying. These results may have important implications for creating healthier reduced-fat fried food products.

Impact of amylose content on structural changes and oil absorption of fried maize starches.

The absorption of oil during frying has important implications for food quality, cost, and nutrition. Maize starches with low (WMS), intermediate (NMS), and high amylose (HAMS) contents were therefore heated in oil to mimic the frying process, and the impact of amylose content on the hierarchical structures and oil absorption of the fried starches was evaluated. Amylose affected the oil absorption by interfering with the structural evolution of the starch or by directly interacting with the lipids during frying. At low moisture level (20%), the granular state was preserved after frying and so the size and porosity of the granules played a dominant role in the oil absorption process, explaining why the highest oil absorption occurred in WMS. At 40% moisture content, NMS absorbed the most oil because of its granular morphology and lower crystallinity. At 60% moisture content, HAMS absorbed more oil than NMS, because more amylose molecules in HAMS provided more hydrophobic helical cavities available for lipids.

Establishing the impact of food matrix effects on the bioaccessibility of nutraceuticals and pesticides using a standardized food model.

It is important to establish the impact of food matrix effects on the bioaccessibility of co-ingested substances, such as nutraceuticals, engineered nanomaterials, pharmaceuticals, and pesticides. Recently, a standardized food model (SFM) representing a typical US diet has been developed to facilitate these investigations. This model consists of caseinate-stabilized fat droplets, free casein, pectin, starch, sucrose, and sodium chloride. The SFM was stable to creaming for 2 days, contained small particles (d ≈ 180 nm), and had a narrow particle size distribution. The SFM was mixed with pureed tomato that had been deliberately contaminated with chlorpyrifos (a hydrophobic pesticide). The resulting mixture was then exposed to an in vitro digestion model. The structural and physicochemical characteristics of the samples (microstructure, particle diameter, and surface potential) were determined after each GIT stage. Also, the bioaccessibility of both chlorpyrifos and lycopene (a hydrophobic nutraceutical) from the pesticide-contaminated tomatoes was determined after the final digestion process. For lycopene, the bioaccessibility was much lower for tomato alone (0.75%) than for tomato plus SFM (19.0%) (p < 0.05). For chlorpyrifos, the bioaccessibility was also appreciably lower for tomato alone (40.4%) than for tomato plus SFM (58.7%), but the effect was less dramatic (p < 0.05). Our results indicate that a standardized food matrix impacts the bioaccessibility of hydrophobic bioactives in fresh produce by an amount that depends on the nature of the bioactive agent. The SFM developed here may therefore be useful for screening the potential impact of food matrix effects on the bioaccessibility of ingested bioactives and other substances.

Production of highly concentrated oil-in-water emulsions using dual-channel microfluidization: Use of individual and mixed natural emulsifiers (saponin and lecithin).

The fabrication of concentrated oil-in-water emulsions is useful for reducing storage and transportation costs, as well as for providing desirable textural, optical, stability, and release characteristics in commercial products. In this study, 50wt% oil-in-water emulsions were produced from natural emulsifiers using high-pressure dual-channel microfluidization (89.6MPa, 1 pass). The particle size and charge characteristics of emulsions stabilized using a hydrophilic biosurfactant (quillaja saponin) or mixtures of hydrophilic and hydrophobic biosurfactants (quillaja saponin+soy lecithin) were measured. The physical stability of the emulsions was determined during storage under quiescent conditions (pH7, 25°C). The mean droplet diameter and polydispersity decreased with increasing hydrophilic and hydrophobic biosurfactant concentration. Surface potential measurements indicated that interfacial composition depended on the amount of hydrophilic and hydrophobic biosurfactant present. The inclusion of hydrophobic emulsifier in the oil phase and hydrophilic emulsifier in the aqueous phase prior to homogenization, led to the formation of smaller oil droplets than using the hydrophilic emulsifier alone. The relatively small size and polydispersity of the droplets in the mixed-emulsifier systems led to a higher emulsion viscosity and a better aggregation stability, i.e., there was a smaller change in particle size during storage. However, some creaming was still observed in the emulsions due to the presence of a fraction of relatively large droplets. In summary, concentrated emulsions stabilized by mixed biosurfactants may be advantageous for commercial application in certain food, beverage, and pharmaceutical products.

Potential physicochemical basis of Mediterranean diet effect: Ability of emulsified olive oil to increase carotenoid bioaccessibility in raw and cooked tomatoes.

Excipient emulsions have compositions and structures specifically designed to increase the bioavailability of nutraceuticals in foods that they are co-ingested with. In this study, olive oil excipient emulsions were shown to significantly increase the bioaccessibility of carotenoids from tomatoes using a simulated gastrointestinal tract (GIT) model (p<0.05): being 8.18±0.93%, 11.85±1.76% for raw tomato-buffer mixture, and cooked tomato-buffer mixture; While being 32.3±2.60%, 55.7±3.28% and 42.6±3.75% for raw tomato-emulsion mixture, cooked tomato-emulsion mixture (boiled together) and cooked tomato- emulsion mixture (tomato boiled alone). These effects were attributed to: (i) the ability of digested olive oil droplets to form mixed micelles in the small intestine that solubilized the carotenoids; and, (ii) the ability of natural antioxidants (phenolics) in the olive oil to protect the carotenoids from oxidation. Thermal treatment (boiling) significantly increased carotenoid bioaccessibility from the tomatoes digested with emulsion, which was attributed to plant tissue disruption at elevated temperatures facilitating carotenoid release (p<0.05). Carotenoid bioaccessibility was higher when the tomatoes were boiled with emulsions (55.7±3.28%) than when they were boiled alone and then added to emulsions (42.6±3.75%). In conclusion, this study indicates that olive oil emulsions boost the bioaccessibility and chemical stability of lipophilic nutraceuticals in tomatoes, which may make an important contribution to the potential health benefits of the Mediterranean diet.

Influence of lipid type on gastrointestinal fate of oil-in-water emulsions: In vitro digestion study.

The potential gastrointestinal fate of oil-in-water emulsions containing lipid phases from different sources was examined: vegetable oils (corn, olive, sunflower, and canola oil); marine oils (fish and krill oil); flavor oils (orange and lemon oil); and, medium chain triglycerides (MCT). The lowest rates and extents of lipid digestion were observed for emulsified flavor oil, followed by emulsified krill oil. There was no appreciable difference between the final amounts of free fatty acids released for emulsified digestible oils. Differences in the digestibility of emulsions prepared using different oils were attributed to differences in their compositions, e.g., fatty acid chain length and unsaturation. The particle size distribution, particle charge, microstructure, and macroscopic appearance of the emulsions during passage through the simulated GIT depended on oil type. The results of this study may facilitate the design of functional foods that control the digestion and absorption of triglycerides, as well as the bioaccessibility of hydrophobic bioactives.