Effect of oxide interactions on chromium speciation transformation during simulated municipal solid waste incineration.

Chromium released during municipal solid waste incineration (MSWI) is toxic and carcinogenic. The removal of chromium from simulated MSWI flue gas by four sorbents (CaO, bamboo charcoal (BC), powdered activated carbon (PAC), and Al2O3) and the effects of four oxides (SiO2, Al2O3, Fe2O3, and CaO) on chromium speciation transformation were investigated. The results showed that the removal rates of total Cr by the four sorbents were Al2O3 < CaO < PAC < BC, while the removal rates of Cr(VI) by the four sorbents were Al2O3 < PAC < BC < CaO. CaO had a strong oxidizing effect on Cr(III), while BC and PAC had a better-reducing effect on Cr(VI). SiO2 was better for the reduction of Na2CrO4 and K2CrO4 above 1000°C due to its strong acidity, and the addition of CaO significantly inhibited the reduction of Cr(VI). MgCrO4 decomposed above 700°C to form MgCr2O4, and the reaction between MgCrO4 and oxides also existed in the form of a more stable trivalent spinel. Furthermore, when investigating the effect of oxides on the oxidation of Cr(III) in CrCl3, it was discovered that CaO promoted the conversion of Cr(III) to Cr(VI), while the presence of chlorine caused chromium to exist in the form of Cr(V), and increasing the content of CaO and extending the heating time facilitated the oxidation of Cr(III). In addition, silicate, aluminate, and ferrite were generated after the addition of SiO2, Al2O3, and Fe2O3, which reduced the alkalinity of CaO and had an important role in inhibiting the oxidation of Cr(III). The acidic oxides can not only promote the reduction of Cr(VI) but also have an inhibitory effect on the oxidation of Cr(III) ascribed to alkali metals/alkaline earth metals, and the proportion of acidic oxides can be increased moderately to reduce the generation of harmful substances in the hazardous solid waste heat treatment.

Intraperitoneal administration of carcinoembryonic antigen-directed chimeric antigen receptor T cells is a robust delivery route for effective treatment of peritoneal carcinomatosis from colorectal cancer in pre-clinical study.

BACKGROUND AIMS: Peritoneal carcinomatosis (PC) from colorectal cancer (CRC) is a highly challenging disease to treat. Systemic chimeric antigen receptor (CAR) T cells have shown impressive efficacy in hematologic malignancies but have been less effective in solid tumors. We explored whether intraperitoneal (i.p.) administration of CAR T cells could provide an effective and robust route of treatment for PC from CRC. METHODS: We generated second-generation carcinoembryonic antigen (CEA)-specific CAR T cells. Various animal models of PC with i.p. and extraperitoneal metastasis were treated by i.p. or intravenous (i.v.) administration of CEA CAR T cells. RESULTS: Intraperitoneally administered CAR T cells exhibited superior anti-tumor activity compared with systemic i.v. cell infusion in an animal model of PC. In addition, i.p. administration conferred a durable effect and protection against tumor recurrence and exerted strong anti-tumor activity in an animal model of PC with metastasis in i.p. or extraperitoneal organs. Moreover, compared with systemic delivery, i.p. transfer of CAR T cells provided increased anti-tumor activity in extraperitoneal tumors without PC. This phenomenon was further confirmed in an animal model of pancreatic carcinoma after i.p. administration of our newly constructed prostate stem cell antigen-directed CAR T cells. CONCLUSIONS: Taken together, our data suggest that i.p. administration of CAR T cells may be a robust delivery route for effective treatment of cancer.

Hypoxia-Responsive CAR-T Cells Exhibit Reduced Exhaustion and Enhanced Efficacy in Solid Tumors.

Expanding the utility of chimeric antigen receptor (CAR)-T cells in solid tumors requires improving their efficacy and safety. Hypoxia is a feature of most solid tumors that could be used to help CAR-T cells discriminate tumors from normal tissues. In this study, we developed hypoxia-responsive CAR-T cells by engineering the CAR to be under regulation of hypoxia-responsive elements and selected the optimal structure (5H1P-CEA CAR), which can be activated in the tumor hypoxic microenvironment to induce CAR-T cells with high polyfunctionality. Hypoxia-responsive CAR T cells were in a "resting" state with low CAR expression under normoxic conditions. Compared with conventional CAR-T cells, hypoxia-responsive CAR-T cells maintained lower differentiation and displayed enhanced oxidative metabolism and proliferation during cultivation, and they sowed a capacity to alleviate the negative effects of hypoxia on T-cell proliferation and metabolism. Furthermore, 5H1P-CEA CAR-T cells exhibited decreased T-cell exhaustion and improved T-cell phenotype in vivo. In patient-derived xenograft models, hypoxia-responsive CAR-T cells induced more durable antitumor activity than their conventional counterparts. Overall, this study provides an approach to limit CAR expression to the hypoxic tumor microenvironment that could help to enhance CAR T-cell efficacy and safety in solid tumors. SIGNIFICANCE: Engineering CAR-T cells to upregulate CAR expression under hypoxic conditions induces metabolic reprogramming, reduces differentiation, and increases proliferation to enhance their antitumor activity, providing a strategy to improve efficacy and safety.

Retention of trace elements in coal-fired flue gas by a novel heterogeneous agglomeration technology.

Heterogeneous agglomeration (HA) is a very potential technology for coal-fired flue gas treatment. In this paper, the distribution and migration mechanisms of trace elements (TEs) such as Se, As and Pb in CFPPs were studied on a 30,000 m3/hr pilot-scale experimental platform. The influences of HA on the removal efficiency of gaseous and particulate TEs were well analyzed. The results showed that Se, As and Pb were enriched in fly ash, and their sensitivity to particle size is quite different. The content of Se was the highest in PM1, reaching 193.04 mg/kg at the electrostatic precipitator (ESP) outlet. The average particle size of the total dust before ESP increased significantly from 21.686 to 62.612 µm after injecting the heterogeneous agglomeration adsorbent, conducive to its further removal by ESP. In addition, the concentrations of gaseous Se, As and Pb in the flue gas decreased after adsorbent spray, and accordingly, their contents in the hierarchical particles increased, indicating that the adsorbent could effectively promote the adsorption of gaseous trace elements in fly ash and reduce the possibility of their escape to the atmosphere. Total concentrations of Se, As and Pb emitted by wet flue gas desulfurization (WFGD) are 0.223, 0.668 and 0.076 µg/m3, which decreased by 59.98%, 47.69% and 90.71%, respectively. Finally, a possible HA mechanism model was proposed, where chemical adsorption, physical condensation and collision agglomeration of gaseous TEs and fine particles with adsorbent droplets occurred to form larger agglomerates.

A review on removal of mercury from flue gas utilizing existing air pollutant control devices (APCDs).

Mercury is a highly toxic heavy metal pollutant. It is of great significance to develop cost-effective mercury pollution control technologies of coal-fired flue gas. Among various mercury from flue gas removal methods, the application of existing air pollution control devices (APCDs) to remove mercury from flue gas is one of the most valuable methods because it doesn't need to install additional mercury removal equipment, reducing the cost of mercury removal. This review summarizes the recent progress of mercury from flue gas removal by APCDs (e.g., SCR denitration device, WFGD system and dust removal device). SCR denitration device can achieve partial removal of mercury in flue gas through combined with WFGD system, but easy inactivation and poor sulfur/water/heavy metals resistance of SCR catalyzers are still the main problems. WFGD systems can remove most of Hg2+ (80%-95%), but have low treatment ability for Hg0. Various oxidants can effectively oxidize Hg0 into Hg2+. However, traditional oxidants have high prices and secondary pollution due to the formation of by-products. Fabric filters (FFs), electrostatic precipitators (ESPs) and hybrid fabric filters (HFs) can all control the emission of mercury in the flue gas to a certain extent, especially can effectively remove most of HgP and part of Hg2+, but has low removal capacity for Hg0. Compared with ESP, FF has better capture efficiency for Hg2+ and Hg0, and a combination of ESP and FF, that is HF, can effectively improve the mercury removal capacity.

CD9, a potential leukemia stem cell marker, regulates drug resistance and leukemia development in acute myeloid leukemia.

BACKGROUND: Leukemia stem cells (LSCs) are responsible for the initiation, progression, and relapse of acute myeloid leukemia (AML). Therefore, a therapeutic strategy targeting LSCs is a potential approach to eradicate AML. In this study, we aimed to identify LSC-specific surface markers and uncover the underlying mechanism of AML LSCs. METHODS: Microarray gene expression data were used to investigate candidate AML-LSC-specific markers. CD9 expression in AML cell lines, patients with AML, and normal donors was evaluated by flow cytometry (FC). The biological characteristics of CD9-positive (CD9+) cells were analyzed by in vitro proliferation, chemotherapeutic drug resistance, migration, and in vivo xenotransplantation assays. The molecular mechanism involved in CD9+ cell function was investigated by gene expression profiling. The effects of alpha-2-macroglobulin (A2M) on CD9+ cells were analyzed with regard to proliferation, drug resistance, and migration. RESULTS: CD9, a cell surface protein, was specifically expressed on AML LSCs but barely detected on normal hematopoietic stem cells (HSCs). CD9+ cells exhibit more resistance to chemotherapy drugs and higher migration potential than do CD9-negative (CD9-) cells. More importantly, CD9+ cells possess the ability to reconstitute human AML in immunocompromised mice and promote leukemia growth, suggesting that CD9+ cells define the LSC population. Furthermore, we identified that A2M plays a crucial role in maintaining CD9+ LSC stemness. Knockdown of A2M impairs drug resistance and migration of CD9+ cells. CONCLUSION: Our findings suggest that CD9 is a new biomarker of AML LSCs and is a promising therapeutic target.

Enhancement of CeO2 modified commercial SCR catalyst for synergistic mercury removal from coal combustion flue gas.

CeO2 modified commercial SCR (selective catalytic reduction) catalysts with different CeO2 content were prepared and researched for synergistic mercury removal from coal combustion flue gas in this study. The characterization analyses on the catalysts indicated that the introduction of CeO2 increased the surface area, the dispersity of the metal oxides on the TiO2 support and the redox behavior of the catalyst, which was beneficial to the catalytic activity. The experimental results confirmed that the CeO2 loading improved the catalytic efficiencies over the commercial SCR catalyst. The catalyst with a CeO2 content of 4% displayed the optimal performance for NO and synergistic Hg0 removal, of which the NO conversion and Hg0 removal efficiency reached 90.5% and 78.2%, respectively, at 300 °C in simulated coal-fired flue gas. The Hg0 removal activity, the independence of Hg0 removal from HCl concentration and the effects of SO2, NO and NH3 on Hg0 removal efficiency all became positive over the modified catalyst compared to over the raw one, which was mainly due to the sufficient chemisorbed oxygen derived from the synergy of V2O5 and CeO2 and the redox transformation between Ce3+ and Ce4+ on the catalyst surface. The CeO2 modification generated a significant enhancement on the catalytic performance and made the commercial SCR catalyst more suitable to be employed for NO and synergistic mercury removal in a coal combustion power plant.

Investigation on mercury removal and recovery based on enhanced adsorption by activated coke.

This work is to systematically study the mercury-removal behavior of activated coke (AC), regeneration of spent AC by microwave treatment and subsequent recycling of Hg0. The powdery (AC) was obtained under coal-fired hot gas conditions in a drop-tube reactor. The adsorption mechanism and capacity of the AC for Hg0 removal in a H2O + SO2 + O2 atmosphere were investigated. The regeneration of the AC by microwave heating and recovery of Hg0 were studied. The results showed that this AC preparation method can greatly simplify the process, and the AC's large surface area, developed pore structure, and abundant functional groups played a key role in the adsorption of Hg0. The adsorption mechanism and the optimum reaction conditions were determined, with a highest average Hg0-adsorption efficiency of 91% obtained at 70 °C in 3 h. Desorption of Hg0 was also studied, in which the alkaline-functional-group content and pore structure were enhanced, and S was detected by X-ray photoelectron spectroscopy in microwave-regenerated AC, which could improve the Hg0 removal efficiency increased to 96% after five adsorption/desorption cycles. The Hg0 could subsequently be recovered from the desorbed gas by condensation with an efficiency of 87.4% using ice-water.

Electrospun cerium-based TiO2 nanofibers for photocatalytic oxidation of elemental mercury in coal combustion flue gas.

Photocatalytic oxidation is an attractive method for Hg-rich flue gas treatment. In the present study, a novel cerium-based TiO2 nanofibers was prepared and selected as the catalyst to remove mercury in flue gas. Accordingly, physical/chemical properties of those nanofibers were clarified. The effects of some important parameters, such as calcination temperature, cerium dopant content and different illumination conditions on the removal of Hg0 using the photocatalysis process were investigated. In addition, the removal mechanism of Hg0 over cerium-based TiO2 nanofibers focused on UV irradiation was proposed. The results show that catalyst which was calcined at 400 °C exhibited better performance. The addition of 0.3 wt% Ce into TiO2 led to the highest removal efficiency at 91% under UV irradiation. As-prepared samples showed promising stability for long-term use in the test. However, the photoluminescence intensity of nanofibers incorporating ceria was significantly lower than TiO2, which was attributed to better photoelectron-hole separation. Although UV and O2 are essential factors, the enhancement of Hg0 removal is more obviously related to the participation of catalyst. The coexistence of Ce3+ and Ce4+, which leads to the efficient oxidation of Hg0, was detected on samples. Hg2+ is the final product in the reaction of Hg0 removal. As a consequence, the emissions of Hg0 from flue gas can be significantly suppressed. These indicate that combining photocatalysis technology with cerium-based TiO2 nanofibers is a promising strategy for reducing Hg0 efficiently.

Influence of carbonation under oxy-fuel combustion flue gas on the leachability of heavy metals in MSWI fly ash.

Due to the high cost of pure CO2, carbonation of MSWI fly ash has not been fully developed. It is essential to select a kind of reaction gas with rich CO2 instead of pure CO2. The CO2 uptake and leaching toxicity of heavy metals in three typical types of municipal solid waste incinerator (MSWI) fly ash were investigated with simulated oxy-fuel combustion flue gas under different reaction temperatures, which was compared with both pure CO2 and simulated air combustion flue gas. The CO2 uptake under simulated oxy-fuel combustion flue gas were similar to that of pure CO2. The leaching concentration of heavy metals in all MSWI fly ash samples, especially in ash from Changzhou, China (CZ), decreased after carbonation. Specifically, the leached Pb concentration of the CZ MSWI fly ash decreased 92% under oxy-fuel combustion flue gas, 95% under pure CO2 atmosphere and 84% under the air combustion flue gas. After carbonation, the leaching concentration of Pb was below the Chinese legal limit. The leaching concentration of Zn from CZ sample decreased 69% under oxy-fuel combustion flue gas, which of Cu, As, Cr and Hg decreased 25%, 33%, 11% and 21%, respectively. In the other two samples of Xuzhou, China (XZ) and Wuhan, China (WH), the leaching characteristics of heavy metals were similar to the CZ sample. The speciation of heavy metals was largely changed from the exchangeable to carbonated fraction because of the carbonation reaction under simulated oxy-fuel combustion flue gas. After carbonation reaction, most of heavy metals bound in carbonates became more stable and leached less. Therefore, oxy-fuel combustion flue gas could be a low-cost source for carbonation of MSWI fly ash.

Isolation and Structure Characterization of Cytotoxic Phorbol Esters from the Seeds of Croton tiglium.

Nine new and eleven known phorbol esters were isolated from an acetone extract of the seeds of Croton tiglium. Their structures were determined by extensive analysis of spectroscopic data. Eleven of these compounds were evaluated for their inhibition activity on human tumor cell lines HL-60 and lung carcinoma A549. 12-O-Tiglylphorbol-13-acetate (11), 12-O-(2-methyl)-butyrylphorbol-13-aetate (12), and 12-O-tiglylphorbol-13-isobutyrate (13) exhibited strong inhibition activity against both HL-60 and A549 cell lines with IC50 values ≤ 0.02 and ≤ 0.1 µg/mL, respectively. Compound 18 showed strong inhibition activity against the HL-60 cell line with an IC50 value of 0.02 µg/mL.

Integrated removal of NO and mercury from coal combustion flue gas using manganese oxides supported on TiO2.

A catalyst composed of manganese oxides supported on titania (MnOx/TiO2) synthesized by a sol-gel method was selected to remove nitric oxide and mercury jointly at a relatively low temperature in simulated flue gas from coal-fired power plants. The physico-chemical characteristics of catalysts were investigated by X-ray fluorescence (XRF), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses, etc. The effects of Mn loading, reaction temperature and individual flue gas components on denitration and Hg0 removal were examined. The results indicated that the optimal Mn/Ti molar ratio was 0.8 and the best working temperature was 240°C for NO conversion. O2 and a proper ratio of [NH3]/[NO] are essential for the denitration reaction. Both NO conversion and Hg0 removal efficiency could reach more than 80% when NO and Hg0 were removed simultaneously using Mn0.8Ti at 240°C. Hg0 removal efficiency slightly declined as the Mn content increased in the catalysts. The reaction temperature had no significant effect on Hg0 removal efficiency. O2 and HCl had a promotional effect on Hg0 removal. SO2 and NH3 were observed to weaken Hg0 removal because of competitive adsorption. NO first facilitated Hg0 removal and then had an inhibiting effect as NO concentration increased without O2, and it exhibited weak inhibition of Hg0 removal efficiency in the presence of O2. The oxidation of Hg0 on MnOx/TiO2 follows the Mars-Maessen and Langmuir-Hinshelwood mechanisms.

Construction of extracellular microenvironment to improve surface endothelialization of NiTi alloy substrate.

To mimic extracellular microenvironment of endothelial cell, a bioactive multilayered structure of gelatin/chitosan pair, embedding with vascular endothelial growth factor (VEGF), was constructed onto NiTi alloy substrate surface via a layer-by-layer assembly technique. The successful fabrication of the multilayered structure was demonstrated by scanning electron microscopy, atomic force microscopy, contact angle measurement, attenuated total reflection-fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, respectively. The growth behaviors of endothelial cells on various NiTi alloy substrates were investigated in vitro. Cytoskeleton observation, MTT assay, and wound healing assay proved that the VEGF-embedded multilayer structure positively stimulated adhesion, proliferation and motogenic responses of endothelial cells. More importantly, the present system promoted the nitric oxide production of endothelial cells. The approach affords an alternative to construct extracellular microenvironment for improving surface endothelialization of a cardiovascular implant.

Mercury Adsorption and Oxidation over Cobalt Oxide Loaded Magnetospheres Catalyst from Fly Ash in Oxyfuel Combustion Flue Gas.

Cobalt oxide loaded magnetospheres catalyst from fly ash (Co-MF catalyst) showed good mercury removal capacity and recyclability under air combustion flue gas in our previous study. In this work, the Hg(0) removal behaviors as well as the involved reactions mechanism were investigated in oxyfuel combustion conditions. Further, the recyclability of Co-MF catalyst in oxyfuel combustion atmosphere was also evaluated. The results showed that the Hg(0) removal efficiency in oxyfuel combustion conditions was relative high compared to that in air combustion conditions. The presence of enriched CO2 (70%) in oxyfuel combustion atmosphere assisted the mercury oxidation due to the oxidation of function group of C-O formed from CO2. Under both atmospheres, the mercury removal efficiency decreased with the addition of SO2, NO, and H2O. However, the enriched CO2 in oxyfuel combustion atmosphere could somewhat weaken the inhibition of SO2, NO, and H2O. The multiple capture-regeneration cycles demonstrated that the Co-MF catalyst also present good regeneration performance in oxyfuel combustion atmosphere.

Regenerable cobalt oxide loaded magnetosphere catalyst from fly ash for mercury removal in coal combustion flue gas.

To remove Hg(0) in coal combustion flue gas and eliminate secondary mercury pollution of the spent catalyst, a new regenerable magnetic catalyst based on cobalt oxide loaded magnetospheres from fly ash (Co-MF) was developed. The catalyst, with an optimal loading of 5.8% cobalt species, attained approximately 95% Hg(0) removal efficiency at 150 °C under simulated flue gas atmosphere. O2 could enhance the Hg(0) removal activity of magnetospheres catalyst via the Mars-Maessen mechanism. SO2 displayed an inhibitive effect on Hg(0) removal capacity. NO with lower concentration could promote the Hg(0) removal efficiency. However, when increasing the NO concentration to 300 ppm, a slightly inhibitive effect of NO was observed. In the presence of 10 ppm of HCl, greater than 95.5% Hg(0) removal efficiency was attained, which was attributed to the formation of active chlorine species on the surface. H2O presented a seriously inhibitive effect on Hg(0) removal efficiency. Repeated oxidation-regeneration cycles demonstrated that the spent Co-MF catalyst could be regenerated effectively via thermally treated at 400 °C for 2 h.

Role of flue gas components in mercury oxidation over TiO2 supported MnOx-CeO2 mixed-oxide at low temperature.

MnO(x)-CeO(2) mixed-oxide supported on TiO(2) (Mn-Ce/Ti) was synthesized by an ultrasound-assisted impregnation method and employed to oxidize elemental mercury (Hg(0)) at 200°C in simulated coal combustion flue gas. Over 90% of Hg(0) oxidation was achieved on the Mn-Ce/Ti catalyst at 200°C under simulated flue gas representing those from burning low-rank coals with a high gas hourly space velocity of 60,000 h(-1). Gas-phase O(2) regenerated the lattice oxygen and replenished the chemisorbed oxygen, which facilitated Hg(0) oxidation. HCl was the most effective flue gas component responsible for Hg(0) oxidation. 10 ppm HCl plus 4% O(2) resulted in 100% Hg(0) oxidation under the experimental conditions. SO(2) competed with Hg(0) for active sites, thus deactivating the catalyst's capability in oxidizing Hg(0). NO covered the active sites and consumed surface oxygen active for Hg(0) oxidation, hence limiting Hg(0) oxidation. Water vapor showed prohibitive effect on Hg(0) oxidation due to its competition with HCl and Hg(0) for active adsorption sites. This study provides information about the promotional or inhibitory effects of individual flue gas components on Hg(0) oxidation over a highly effective Mn-Ce/Ti catalyst. Such knowledge is of fundamental importance for industrial applications of the Mn-Ce/Ti catalyst in coal-fired power plants.

Electrospun metal oxide-TiO2 nanofibers for elemental mercury removal from flue gas.

Nanofibers prepared by an electrospinning method were used to remove elemental mercury (Hg(0)) from simulated coal combustion flue gas. The nanofibers composed of different metal oxides (MO(x)) including CuO, In(2)O(3), V(2)O(5), WO(3) and Ag(2)O supported on TiO(2) have been characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersing X-ray (EDX) and UV-vis spectra. The average diameters of these nanofibers were about 200nm. Compared to pure TiO(2), the UV-vis absorption intensity for MO(x)-TiO(2) increased significantly and the absorption bandwidth also expanded, especially for Ag(2)O-TiO(2) and V(2)O(5)-TiO(2). Hg(0) oxidation efficiencies over the MO(x)-TiO(2) nanofibers were tested under dark, visible light (vis) irradiation and UV irradiation, respectively. The results showed that WO(3) doped TiO(2) exhibited the highest Hg(0) removal efficiency of 100% under UV irradiation. Doping V(2)O(5) into TiO(2) enhanced Hg(0) removal efficiency greatly from 6% to 63% under visible light irradiation. Ag(2)O doped TiO(2) showed a steady Hg(0) removal efficiency of around 95% without any light due to the formation of silver amalgam. An extended experiment with 8 Hg(0) removal cycles showed that the MO(x)-TiO(2) nanofibers were stable for removing Hg(0) from flue gas. Factors responsible for the enhanced photocatalytic activities of the MO(x)-TiO(2) nanofibers were also discussed.