The role of computed tomography with external rotation and dorsiflexion in decision making for acute isolated non-displaced posterior malleolar fractures Bartonícek and Rammelt type II: a prospective study.

PURPOSE: Our objective was to evaluate the syndesmotic and fracture instability using conventional ankle computed tomography (CT) with stress maneuvers. METHODS: A consecutive sample of 123 individuals with an ankle sprain was assessed for eligibility. In total, 33 patients met the inclusion criteria. All patients underwent a magnetic resonance imaging (MRI) and CT scan with stress maneuvers (CTSM). The patterns of ligament tears f were classified using West Point grades I, IIA, IIB, III. Mann-Whitney test was used to test the differences in the numerical variables between injured and uninjured syndesmoses. The Spearman correlation tested the strength of the association between the tibial joint surface involved in posterior malleolus fracture and syndesmotic instability. RESULTS: In MRI, two patterns of syndesmotic ligament injury predominated. A completely torn anterior inferior tibiofibular (AITFL) and interosseous tibiofibular ligaments (ITFL) and a completely torn AITFL were combined with a partially torn ITFL. In the neutral phase CTSM and during the stress phase the median difference of the narrowest tibiofibular distance between injured and uninjured syndesmoses was 0.2 mm (P = 0.057) and 2.3 mm (P < 0.0001), respectively. There was no association between the percentage of involvement of the posterior tibial joint surface in the posterior malleolar fracture and syndesmotic instability as measured with CTSM. CONCLUSION: The conventional computed tomography with external rotation and dorsiflexion represents a reproducible and accurate diagnostic option for detecting syndesmosis instability and fracture instability in acute isolated non-displaced posterior malleolar fractures Bartonícek and Rammelt type II. LEVEL OF EVIDENCE: Prospective study among consecutive patients (Diagnosis); Level of evidence, 2.

Normal Values for Distal Tibiofibular Syndesmotic Space With and Without Subject-Driven External Rotation Stress.

BACKGROUND: The diagnosis and treatment of distal tibiofibular syndesmosis (DTFS) injury can be challenging, especially in cases of subtle instability that may be masked on 2-dimensional conventional radiographs. Weightbearing computed tomography (WBCT) has recently emerged as a useful diagnostic tool allowing direct assessment of distal tibiofibular area widening. The purpose of the current study was to examine and report normal threshold values for DTFS area measurements in a cohort of healthy volunteers, assessing the ankles in natural weightbearing position and under subject-driven external rotation stress. METHODS: In this prospective study, we enrolled 25 healthy volunteers without a history of DTFS injury or high ankle sprain, previous foot and ankle surgery, or current ankle pain. Subjects with any prior ankle injuries were excluded. Study participants underwent bilateral standing nonstress and external rotation stress WBCT scans. The DTFS area (mm2) was semiautomatically quantified on axial-plane WBCT images 1 cm proximal to the apex of the talar dome using validated software. Syndesmosis area values were compared between "unstressed" and "stressed" ankles, as well as left and right ankles. Statistical analysis was performed using independent t tests/Wilcoxon analysis with statistical significance defined as P <.05. RESULTS: The study cohort consisted of 50 ankles in 25 patients (12 males, 48%) with a mean age of 28.7 ± 9.3 years. In the unstressed ankle, the mean pooled DTFS area was determined to be 103.8 + 20.8 mm2. The mean syndesmosis area of unstressed left ankles (104.2 + 19.5 mm2) was similar to unstressed right ankles (109.2 + 17.2 mm2) in the cohort (P = .117). With external rotation stress, the DTFS area of left ankles (mean difference -0.304 mm2, CI -12.1 to 11.5; P = .082), right ankles (mean difference -5.5 mm2, CI 16.7-5.7; P = .132), and all ankles (mean difference -2.9 mm2, CI -10.8 to 5.1; P = .324) remained similar. CONCLUSION: This study presents normal values and range for DTFS area calculation. In uninjured ankles with expected intact ligaments, subject-driven external rotation stress did not result in significant widening of the DTFS space as imaged on with WBCT. LEVEL OF EVIDENCE: Level II, cross-sectional study.

The Classic Three-Month Post-Operative Adaptation Phase in Foot and Ankle Surgery-An Expert Perspective.

Foot and ankle disorders are a common reason for orthopedic surgical intervention. After surgery, specific precautions such as partial weight bearing or complete unloading, and the use of walking aids, coupled with a period of rest, are usually implemented to ensure the surgical outcome. However, when these aids are discontinued and the patients resume load increase and normal daily activities, they may enter a transitional phase characterized by inflammation, swelling, and pain. We call this phenomenon the "classic three-month post-operative adaptation phase" (POAP). It is essential to differentiate this physiological transition phase from other conditions, such as from the immediate post-surgical inflammation, complex pain regional syndrome, or an infection. The objective of this expert opinion is to describe and raise medical awareness of this evidence-based phenomenon, which we commonly observe in our daily practice.

Ankle Joint Bone Density Distribution Correlates with Overall 3-Dimensional Foot and Ankle Alignment.

BACKGROUND: Altered stress distribution in the lower limb may impact bone mineral density (BMD) in the ankle bones. The purpose of the present study was to evaluate the spatial distribution of BMD with use of weight-bearing cone-beam computed tomography (WBCT). Our hypothesis was that BMD distribution would be even in normal hindfeet, increased medially in varus hindfeet, and increased laterally in valgus hindfeet. METHODS: In this study, 27 normally aligned hindfeet were retrospectively compared with 27 valgus and 27 varus-aligned hindfeet. Age (p = 0.967), body mass index (p = 0.669), sex (p = 0.820), and side (p = 0.708) were similar in the 3 groups. Hindfoot alignment was quantified on the basis of WBCT data sets with use of multiple measurements. BMD was calculated with use of the mean Hounsfield unit (HU) value as a surrogate. The HU medial-to-lateral ratio (HUR), calculated from tibial and talar medial and lateral half-volumes, was the primary outcome of the study. RESULTS: The 3 groups significantly differed (p < 0.001) in terms of tibial HUR (median, 0.91 [interquartile range (IQR), 0.75 to 0.98] in valgus hindfeet, 1 [IQR, 0.94 to 1.05] in normal hindfeet, and 1.04 [IQR, 0.99 to 1.1] in varus hindfeet) and talar HUR (0.74 [IQR, 0.50 to 0.80] in valgus hindfeet, 0.82 [IQR, 0.76 to 0.87] in normal hindfeet, and 0.92 [IQR, 0.86 to 1.05] in varus hindfeet). Linear regression showed that all hindfoot measurements significantly correlated with tibial and talar HUR (p < 0.001 for all). The mean HU values for normally-aligned hindfeet were 495.2 ± 110 (medial tibia), 495.6 ± 108.1 (lateral tibia), 368.9 ± 80.3 (medial talus), 448.2 ± 90.6 (lateral talus), and 686.7 ± 120.4 (fibula). The mean HU value for each compartment was not significantly different across groups. CONCLUSIONS: Hindfoot alignment and medial-to-lateral BMD distribution were correlated. In varus hindfeet, an increased HU medial-to-lateral ratio was consistent with a greater medial bone density in the tibia and talus as compared with the lateral parts of these bones. In valgus hindfeet, a decreased ratio suggested greater bone density in the lateral as compared with the medial parts of both the tibia and the talus. LEVEL OF EVIDENCE: Prognostic Level III . See Instructions for Authors for a complete description of levels of evidence.

Distribution, prevalence, and impact on the metatarsosesamoid complex of first metatarsal pronation in hallux valgus.

BACKGROUND: Previous simulated weight-bearing CT (WBCT) studies classifying first metatarsal (M1) pronation suggested a high prevalence of M1 hyper-pronation in hallux valgus (HV). These findings have prompted a marked increase in M1 supination in HV surgical correction. No subsequent study confirms these M1 pronation values, and two recent WBCT investigations suggest lower normative M1 pronation values. The objectives of our WBCT study were to (1) determine M1 pronation distribution in HV, (2) define the hyperpronation prevalence compared to preexisting normative values, and (3) assess the relationship of M1 pronation to the metatarso-sesamoid complex. We hypothesized that the M1 head pronation distribution would be high in HV. METHODS: We retrospectively identified 88 consecutive feet with HV in our WBCT dataset and measured M1 pronation with the Metatarsal Pronation (MPA) and α angles. Similarly, using two previously published methods defining the pathologic pronation threshold, we assessed our cohort's M1 hyper-pronation prevalence, specifically (1) the upper value of the 95% confidence interval (CI95) and (2) adding two standard deviations at the mean normative value (2 SD). Sesamoid station (grading) was assessed on the coronal plane. RESULTS: The mean MPA was 11.4+/-7.4 degrees and the α angle was 16.2+/-7.4 degrees. According to the CI95 method, 69/88 HV (78.4%) were hyperpronated using the MPA, and 81/88 HV (92%) using the α angle. According to the 2 SD method, 17/88 HV (19.3%) were hyperpronated using the MPA, and 20/88 HV (22.7%) using the α angle. There was a significant difference in MPA among sesamoid gradings (p = 0.025), with a paradoxical decrease in MPA when metatarsosesamoid subluxation was increased. CONCLUSION: M1 head pronation distribution in HV was higher than in normative values, but threshold change demonstrated contradictory hyper-pronation prevalences (85% to 20%), calling into question the previously reported high prevalence of M1 hyper-pronation in HV. An increase in sesamoid subluxation was associated with a paradoxical decrease in M1 head pronation in our study. We suggest that a greater understanding of the impact of HV M1 pronation is warranted before routine M1 surgical supination is recommended for patients with HV. LEVEL OF EVIDENCE: Level III, retrospective cohort study.

Recurrence Rates With Longer-Term Follow-up After Hallux Valgus Surgical Treatment With Distal Metatarsal Osteotomies: A Systematic Review and Meta-analysis.

BACKGROUND: Recurrence of hallux valgus (HV) following corrective surgery is a frequent concern. A recent systematic review estimated recurrence of HV in only 4.9%, which may be an underestimation, as most included studies had short- to mid-term follow-up. The purpose of this systematic review and meta-analysis was to assess long-term outcomes of distal osteotomies of the first metatarsal (M1) to treat HV without inflammatory disease or degenerative arthritis, and to assess HV recurrence rates reported in studies that had a minimum follow-up of 5 years. METHODS: This systematic review conforms to the PRISMA guidelines. The authors conducted a search using PubMed, Embase, and Cochrane Central Register of Controlled Trials databases. Studies that report outcomes of distal osteotomies of the M1 for noninflammatory and nondegenerative HV at a minimum follow-up of 5 years. RESULTS: We found 17 eligible studies comprising 18 data sets, reporting outcomes of 4 categories of osteotomies: Chevron, Mitchell, Bösch, and "others." The HV recurrence rate was 64% considering the threshold of >15 degrees hallux valgus angle (HVA), 10% having >20 degrees, and 5% having >25 degrees. CONCLUSION: At a minimum of 5 years following distal osteotomies of the M1, the mean weighted postoperative HVA was significantly higher for Mitchell osteotomies compared with the 3 other osteotomies reviewed. There were otherwise no significant differences in recurrence rates using the 3 HVA thresholds, or intermetatarsal angle among any of the surgical techniques reported in 2 or more studies. The pooled HV recurrence rates considering the various thresholds of HVA were as follows: 64% having >15 degrees, 10% having >20 degrees, and 5% having >25 degrees. The recurrence rates in the long term for all categories of surgical procedures suggest that better understanding of pathogenesis and prognosis of HV is required before modifying or introducing new surgical techniques. LEVEL OF EVIDENCE: Level IV, meta-analysis.

Prevalence and pattern of lateral impingements in the progressive collapsing foot deformity.

INTRODUCTION: The prevalence of lateral bony impingements [i.e., Sinus Tarsi (STI), Talo-Fibular (TFI) and Calcaneo-Fibular (CFI)] and their association with Peritalar Subluxation (PTS) have not been clearly established for progressive collapsing foot deformity (PCFD).This study aims to assess the prevalence of STI, TFI and CFI in PCFD, in addition to their association with PTS. We hypothesized that STI and TFI would be more prevalent than CFI. MATERIALS AND METHODS: Seventy-two continuous symptomatic PCFD cases were retrospectively reviewed. Weightbearing computed tomography (WBCT) was used to assess lateral impingements and classified as STI, TFI and CFI. PTS was assessed by the percent of uncovered and the incongruence angle of the middle facet, and the overall foot deformity was determined by the foot and ankle offset (FAO). Data were collected by two fellowship-trained independent observers. RESULTS: Intra-observer and inter-observer reliabilities for impingement assessment ranged from substantial to almost perfect. STI was present in 84.7%, TFI in 65.2% and CFI in 19.4%. PCFD with STI showed increased middle facet uncoverage (p = 0.0001) and FAO (p = 0.0008) compared to PCFD without STI. There were no differences in FAO and middle facet uncoverage in PCFD with TFI and without TFI. PCFD with CFI was associated with STI in 100% of cases. PCFD with CFI showed decreased middle facet incongruence (p = 0.04) and higher FAO (p = 0.006) compared to PCFD without CFI. CONCLUSIONS: STI and TFI were more prevalent than CFI in PCFD. However, only STI was associated with PTS. Conversely, CFI was associated with less PTS, suggesting a different pathological mechanism which could be a compensatory subtalar behavior caused by deep layer failure of the deltoid ligament and talar tilt.

A comparison between the Bluman et al. and the progressive collapsing foot deformity classifications for flatfeet assessment.

INTRODUCTION: Bluman et al., flatfoot classification is based on posterior tibial tendon (PTT) dysfunction leading to a chronological appearance of several foot deformities. An expert consensus recently proposed a new classification named Progressive Collapsing Foot Deformity (PCFD) in which the focus was shifted to five different independent foot and ankle deformities and their flexibility or rigidity. The aim of this study was to compare Bluman and PCFD classifications. We hypothesize that both classifications will be reliable and that the PCFD classification will allow a larger distribution of the different types of foot deformity. MATERIALS AND METHODS: We performed a retrospective IRB-approved study including 92 flatfeet. Three foot and ankle surgeons reviewed patient files and radiographs to classify each foot using both classifications. Bluman classification was performed one time as initially described and a second time after removing the Angle of Gissane sclerosis sign. Interobserver reliabilities were determined with Fleiss' kappa values. RESULTS: Interobserver reliabilities of Bluman and PCFD classifications were, respectively, substantial 0.67 and moderate 0.55. PCFD Class C and D reliabilities were, respectively, slight 0.07 and fair 0.28. The 276 readings were spread into 10 substages in Bluman and 65 subclasses in PCFD. The progressivity of the Bluman classification prevented the combination of flexible hindfoot valgus (II Bluman, 1A PCFD), midfoot abduction (IIB, 1B) and medial column instability (IIC, 1C) which was frequent in our study (112/276 readings, 40.6%). By removing the Angle of Gissane sclerosis sign from the Bluman classification, the prevalence of stage III decreased from 44.2 to 10.1%. CONCLUSIONS: Bluman and PCFD classifications were reliable. The PCFD classification showed a larger distribution of different types of flatfeet but Classes C and D need better definition. The progressivity of Bluman classification causes inconsistencies and Gissane angle sclerosis sign is inappropriately used and might lead to incorrect surgical indications.

Does metatarsus primus elevatus really exist in hallux rigidus? A weightbearing CT case-control study.

BACKGROUND: Elevated first metatarsal, Metatarsus primus elevatus (MPE), has been a topic of controversy. Recent studies have supported a significantly elevated first metatarsal in hallux rigidus on weight-bearing radiographs (WBR). However, conventional radiographs have limitations for accurate measurement. Our objective was to comparatively assess MPE and other variables which can affect the spatial relationship of the forefoot in the HR group compared to controls using weight-bearing CT (WBCT). METHODS: In this single-center, retrospective, case-control study, 25 patients (30 feet) with symptomatic HR and 30 controls were selected. WBCT parameters were measured by two independent investigators. Inter-observer reliabilities were assessed using intra-class correlation coefficients (ICCs). MPE was evaluated by measuring the direct distance between 1st and 2nd metatarsals. Independent t tests were performed to compare the two groups. A threshold of MPE to diagnose HR was calculated using the Receiver Operating Characteristic (ROC) curve. RESULTS: HR groups had increased hallux valgus angle (HVA) (8.52° in control vs 11.98° in HR) and MPE (2.92 vs 5.09 mm), decreased 1st metatarsal declination angle (21.09° vs 19.07°) 1st/2nd metatarsal declination ratio (87.45 vs 79.71) indicating elevated first metatarsal compared to controls. Dorsal translation of the first metatarsal at the first tarsometatarsal joint was observed in 21 (70%) patients of the HR group when defined as a step-off or discontinuation of the curvature along the first TMT joint. The threshold of MPE for diagnosis of HR was 4.19 mm with 77% sensitivity and 77% specificity. CONCLUSION: Our results confirmed a significantly elevated first metatarsal in the HR group compared to controls on WBCT. A MPE greater than 4.19 mm was found to be diagnostic for symptomatic HR. Significant number of patients in the HR group (70%) had dorsal translation of the first metatarsal at the first TMT joint which can contribute to increased MPE. CLINICAL RELEVANCE: The present study demonstrated significantly increased MPE in HR on WBCT and MPE greater than 4.19 mm on WBCT can be used as a diagnostic threshold for HR.

Early results and complication rate of the LapiCotton procedure in the treatment of medial longitudinal arch collapse: a prospective cohort study.

INTRODUCTION: Instability/collapse of the medial column has been associated with many conditions, particularly progressive collapsing foot deformity (PCFD), hallux valgus (HV), and midfoot arthritis (MA). Restoration of first ray length and sagittal plane alignment to restore the foot tripod is essential when treating these deformities. This study aimed to assess early results, healing, and complication rate of a distraction dorsal opening plantarflexion wedge allograft first tarsometatarsal joint fusion (LapiCotton Procedure) in patients with collapse/instability of the medial column. METHODS: In this prospective cohort study, we included PCFD, HV, and MA patients that underwent a LapiCotton procedure. Fusion site healing was defined by > 50% bone bridging in both interfaces between allograft wedge and host bone using weight-bearing computed tomography (WBCT) after 3 months. First ray collapse radiographic correction and minor and major complications (deep dehiscence, deep infection, and reoperation) were assessed. RESULTS: A total of 22 patients (22 feet) were included (11 PCFD, 6 MA, and 5 of HV patients). Mean follow-up was 5.9 months (range 3-12) and median allograft size was 8 mm (range 5-19 mm). Bone healing was observed in 91% of cases. Two minor complications (9%, both superficial dehiscence) and one major complication (4.5%, deep infection) were observed. Statistically significant improvement of the sagittal plane talus-first metatarsal angle was observed, with mean improvement of 9.4° (95% CI 6.7-12.1°; p < 0.0001). CONCLUSION: In this prospective cohort study of 22 patients treated with the LapiCotton procedure for medial longitudinal arch collapse/instability, we observed a low complication rate (9% minor, 4.5% major), high healing rate after 3 months (91%), one clinically stable radiographic non-union (4.5%) and one unstable non-union (4.5%) needing reoperation. Our results demonstrate promising initial results for LapiCotton technique in treating collapse of the medial longitudinal arch in patients with PCFD, MA and HV deformities. Long-term results are needed to confirm these promising results. LEVEL OF EVIDENCE: Level II, prospective cohort study.

Computed Tomography: State-of-the-Art Advancements in Musculoskeletal Imaging.

ABSTRACT: Although musculoskeletal magnetic resonance imaging (MRI) plays a dominant role in characterizing abnormalities, novel computed tomography (CT) techniques have found an emerging niche in several scenarios such as trauma, gout, and the characterization of pathologic biomechanical states during motion and weight-bearing. Recent developments and advancements in the field of musculoskeletal CT include 4-dimensional, cone-beam (CB), and dual-energy (DE) CT. Four-dimensional CT has the potential to quantify biomechanical derangements of peripheral joints in different joint positions to diagnose and characterize patellofemoral instability, scapholunate ligamentous injuries, and syndesmotic injuries. Cone-beam CT provides an opportunity to image peripheral joints during weight-bearing, augmenting the diagnosis and characterization of disease processes. Emerging CBCT technologies improved spatial resolution for osseous microstructures in the quantitative analysis of osteoarthritis-related subchondral bone changes, trauma, and fracture healing. Dual-energy CT-based material decomposition visualizes and quantifies monosodium urate crystals in gout, bone marrow edema in traumatic and nontraumatic fractures, and neoplastic disease. Recently, DE techniques have been applied to CBCT, contributing to increased image quality in contrast-enhanced arthrography, bone densitometry, and bone marrow imaging. This review describes 4-dimensional CT, CBCT, and DECT advances, current logistical limitations, and prospects for each technique.

Knee Kinetics and Kinematics in Patients With Ankle Arthroplasty and Ankle Arthrodesis.

Background: Previous literature suggests that patients treated with total ankle arthroplasty (TAA) versus ankle arthrodesis (AA) may have better function and lower risk for adjacent joint arthritis in the foot. Little is known on how these interventions affect proximal joints such as the knee. Questions: We sought to assess whether patients with TAA and AA exhibited altered biomechanics linked to the onset and progression of knee osteoarthritis (KOA). We used the knee adduction moment (KAM), a surrogate measure for the mechanical load experienced at the medial tibiofemoral compartment, because it is linked with the onset and progression of KOA. Methods: At a minimum of 2 years postoperatively, instrumented 3-dimensional walking gait was recorded in 10 TAA and 10 AA patients at self-selected walking speeds. TAA patients had either a Salto Talaris or INBONE prosthesis. Average first and second peak KAMs (Nm/kg), KAM impulse (Nm-s/kg), and range-of-motion (ROM, °) were calculated on both the affected and unaffected limbs for each patient. Results: There were no significant differences in the KAM's first and second peaks, impulse, or knee ROM in any plane between the unaffected and affected limbs, or between TAA and AA. Conclusion: TAA and AA may not meaningfully affect ipsilateral knee kinetics and KAMs in short-term follow-up. This study highlights the importance of continuing to study these parameters in larger cohorts of patients with longer follow-up to determine how our treatment of end-stage ankle arthritis may affect the incidence or progression of ipsilateral KOA.

Comparison between Weightbearing-CT semiautomatic and manual measurements in Hallux Valgus.

BACKGROUND: Radiographic measurements are an essential tool to determine the appropriate surgical treatment and outcome for Hallux Valgus (HV). HV deformity is best evaluated by weight-bearing computed tomography (WBCT). The objective was (1) to assess the reliability of WBCT computer-assisted semi-automatic imaging measurements in HV, (2) to compare semi-automatic with manual measurements in the setting of an HV, and (3) to compare semi-automatic measurements between HV and control group. METHODS: In this retrospective IRB (ID# 201904825) approved study, we assessed patients with hallux valgus deformity. The sample size calculation was based on the hallux valgus angle (HVA). Thus to obtain the 0.8 power, including 26 feet with HV in this study, was necessary. Our control group consisted of 19 feet from 19 patients without HV. Raw multiplanar data was evaluated using software CubeVue®. In the axial plane, hallux valgus angle (HVA), intermetatarsal angle (IMA), and interphalangeal angle (IPA) were measured. The semiautomatic 3D measurements were performed using the Bonelogic®Software. Inter-rater reliabilities were performed using ICC. Agreement between methods was tested using the Bland-Altman plots. The difference between Patologic and Control cases using semi-automatic measurements was assessed with the Wilcoxon signed-rank test. Alpha risk was set to 5% (α = 0.05). P ≤ 0.05 were considered significant. RESULTS: Reliabilities utilizing ICC were over 0.80 for WBCT manual measurements and WBCT semi-automatic readings. Inter and intraobserver agreement for Manual and Semi-automatic WBCT measurements demonstrated excellent reliability. CONCLUSIONS: Semi-automatic measurements are reproducible and comparable to measurements performed manually. The software differentiated pathological from non-pathological conditions when subjected to semi-automatic measurements. The development of advanced semi-automatic segmentation software with minimal user intervention is essential for the establishment of big data and can be integrated into clinical practice, facilitating decision-making.

The use of three-dimensional biometric Foot and Ankle Offset to predict additional realignment procedures in total ankle replacement.

BACKGROUND: Decision to perform associated corrective alignment procedures in patients undergoing total ankle replacement (TAR) is commonly made intraoperatively. The Foot and Ankle Offset (FAO) can evaluate multiplanar deformity and be an effective instrument in surgical planning. This study objective was to assess the ability of this tool to predict the need for additional realignment procedures at the time of TAR. METHODS: In this retrospective study, we enrolled 21 patients who underwent TAR and had preoperative WBCT studies. Two independent and blinded observers calculated the preoperative FAO using dedicated software. FAO measurements were compared between the different alignment groups (physiological alignment, valgus and varus). A multivariate regression analysis was used to assess the correlation between performed realignment procedures and FAO values. RESULTS: Mean preoperative FAO was 4.4% (95%CI = 1.4-7.5). The number of osseous realignment procedures needed was found to correlate positively and significantly with FAO (p = .001). The number of osseus procedures needed was significantly higher in patients with valgus malalignment (p = .009). Patients with valgus malalignment needing a medial column procedure had a relative risk of 6.3 when compared to varus malalignment patients (p = .02). CONCLUSION: The number of additional bony realignment procedures performed at the time of TAR significantly correlated with preoperative FAO and that the number of osseus procedures needed was significantly higher in patients with valgus malalignment. Such biometric tools may enhance the preoperative assessment and surgical planning for patients undergoing TAR, with the potential to optimize surgical outcomes.

Does tibialis posterior dysfunction correlate with a worse radiographic overall alignment in progressive collapsing foot deformity? A retrospective study.

BACKGROUND: Posterior Tibial Tendon (PTT) dysfunction is considered to have an important role in Progressive Collapsing Foot Deformity (PCFD). The objective of our study was to assess the relationship between PTT status and three-dimensional foot deformity in PCFD. METHODS: Records from 25 patients with PCFD were included for analysis. The PTT was considered deficient in patients with a positive single heel rise test or a deficit in inversion strength. Three-dimensional foot deformity was assessed using the Foot and Ankle Offset (FAO) from Weight-Bearing-CT imaging. Hindfoot valgus, midfoot abduction and medial longitudinal arch collapse were assessed on X-Rays using hindfoot moment arm, talonavicular coverage angle and Meary's angle respectively. Deland and Rosenberg MRI classifications were used to classify PTT degeneration. RESULTS: PCFD with PTT deficit (13/25) had a mean FAO of 7.75 + /- 3.8% whereas PCFD without PTT deficit had a mean FAO of 6.68 + /- 3.9% (p = 0.49). No significant difference was found between these groups on the hindfoot moment arm and the talonavicular coverage angle (respectively p = 0.54 and 0.32), whereas the Meary's angle was significantly higher in case of PCFD with PTT deficit (p = 0.037). No significant association was found between PTT degeneration on MRI and FAO. CONCLUSION: PCFD associated three-dimensional deformity, hindfoot valgus and midfoot abduction were not associated with PTT dysfunction. PTT dysfunction was only associated with a worse medial longitudinal arch collapse in our study. Considering our results, it does not appear that PTT is the main contributor to PCFD. LEVEL OF EVIDENCE: Level III, Retrospective Comparative Study.

Risks of injury in distal metatarsal minimally invasive osteotomy when comparing standard and modified techniques: A cadaveric study.

BACKGROUND: The objectives of the study were to evaluate the structures at risk in distal metatarsal mini-invasive osteotomy (DMMO) and to compare standard and intraosseous approaches. METHODS: DMMO was performed on the second and fourth metatarsals of 11 fresh-frozen cadaveric specimens. The standard technique was performed in 11 metatarsals. It was then compared to a modified intraosseous technique that entails starting inside the bone in 11 other metatarsals. The cadavers were dissected to identify unintentional injury to soft tissue structures. RESULTS: In the standard group the most injured structures were the metatarsal joint capsules (MJC) (27%), extensor digitorum longus (EDL) (18%), and extensor digitorum brevis (EDB) (9%). The modified intraosseous group injured the EDL (27%), not the MJC (0%) and the EDB (0%). Distances between osteotomies and the dorsal metatarsal head articular surface (DMHAS) were 6.08 ± 3.99 mm in the standard and 9.92 ± 3.42 mm in the modified (p = 0.02). CONCLUSION: The DMMO techniques most frequently injured the EDL. Intra-articular positioning of the osteotomy was more observed in the standard. Overall, it appears the modified method could be an alternative to the standard DMMO. CLINICAL RELEVANCE: The modified minimally invasive DMMO has a comparable rate of potential iatrogenic injuries. This intraosseous procedure may present as an option when planning surgery to the lesser metatarsals. LEVEL OF EVIDENCE: Level III. Comparative Cadaveric Study.

The Assessment of Ankle Osteoarthritis with Weight-Bearing Computed Tomography.

The standard for diagnostic radiographic imaging in foot and ankle surgery was until 2012 radiographs with full weight-bearing without any useful alternative. Weight-bearing cone-beam computed tomography (WBCT) was introduced 2012 for foot and ankle use as a new technology that allows 3D imaging with full weight-bearing which should be not influenced by projection and/or foot orientation. The assessment of ankle osteoarthritis with WBCT including the description of healthy status, effect of alignment and7or (in)stability is extensively illustrated in this review article.

Diagnostic accuracy of measurements in progressive collapsing foot deformity using weight bearing computed tomography: A matched case-control study.

BACKGROUND: We aimed to investigate the diagnostic accuracy of known two-dimensional (2D) and three-dimensional (3D) measurements for Progressive Collapsing Foot Deformity (PCFD) in weight-bearing computed tomography (WBCT). We hypothesized that 3D biometrics would have better specificity and sensitivity for PCFD diagnosis than 2D measurements. METHODS: This was a retrospective case-control study, including 28 PCFD feet and 28 controls matched for age, sex and Body Mass Index. Two-dimensional measurements included: axial and sagittal talus-first metatarsal angles (TM1A and TM1S), talonavicular coverage angle (TNCA), forefoot arch angle (FFAA), middle facet incongruence angle (MF°) and uncoverage percentage (MF%). The 3D Foot Ankle Offset (FAO) was obtained using dedicated semi-automatic software. Intra and interobserver reliabilities were assessed. Receiver Operating Characteristic (ROC) curves were calculated to determine diagnostic accuracy (Area Under the Curve (AUC)), sensitivity and specificity. RESULTS: In PCFD, mean MF% and MF° were respectively 47.2% ± 15.4 and 13.3° ± 5.3 compared with 13.5% ± 8.7 and 5.6° ± 2.9 in controls (p < 0.001). The FAO was 8.1% ± 3.8 in PCFD and 1.4% ± 1.7 in controls (p < 0.001). AUCs were 0.99 (95%CI, 0.98-1) for MF%, 0.96 (95%CI, 0.9-1) for FAO, 0.90 (95%CI, 0.81-0.98) for MF°. For MF%, a threshold value equal or greater than 28.7% had a sensitivity of 100% and specificity of 92.8%. Conversely, a FAO value equal or greater than 4.6% had a specificity of 100% and a sensitivity of 89.2%. All other 2D measurements were significantly different in PCFD and controls (p < 0.001). CONCLUSIONS: MF% and FAO were both accurate measurements for PCFD. MF% demonstrated slightly better specificity. FAO better sensitivity. A combination of threshold values of 28.7% for MF% and 4.6% for FAO yielded 100% sensitivity and specificity.

Flexor tenodesis procedure in the treatment of lesser toe deformities.

In this technical report study, we describe the use of a flexor tenodesis procedure in the treatment of lesser toe deformities (LTD). Using a specific implant, both the flexor digitorum longus and brevis tendons are attached to the plantar aspect of the proximal phalanx, allowing dynamic correction of flexible deformities of metatarsophalangeal and interphalangeal joints. Good clinical results and absence of complications were observed in a series of 3 patients, with considerable correction of the LTD, and absence of substantial residual floating toe or metatarsophalangeal joint stiffness. LEVEL OF EVIDENCE: V - Technical Report/Case Report/Expert Opinion.