The utilization of blood serum ATR-FTIR spectroscopy for the identification of gastric cancer.

Gastric cancer represents a significant public health challenge, necessitating advancements in early diagnostic methodologies. This investigation employed attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy to conduct a multivariate analysis of human serum. The study encompassed the examination of blood samples from 96 individuals diagnosed with gastric cancer and 96 healthy volunteers. Principal component analysis (PCA) was utilized to interpret the infrared spectral data of the serum samples. Specific spectral bands exhibiting intensity variations between the two groups were identified. The infrared spectral ranges of 3500 ~ 3000 cm⁻1, 1700 ~ 1600 cm⁻1, and 1090 ~ 1070 cm⁻1 demonstrated significant diagnostic value for gastric cancer, likely attributable to differences in protein conformation and nucleic acids. By employing machine learning algorithms to differentiate between gastric cancer patients (n = 96) and healthy controls (n = 96), we achieved a sensitivity of up to 89.7% and a specificity of 87.2%. Receiver operating characteristic (ROC) analysis yielded an area under the curve (AUC) of 0.901. These findings underscore the potential of our serum-based ATR-FTIR spectroscopy examination method as a straightforward, minimally invasive, and reliable diagnostic test for the detection of gastric cancer.

Classification of idiopathic recurrent spontaneous miscarriage using FTIR and Raman spectroscopic fusion technology.

Recurrent spontaneous miscarriage refers to the repeated loss of two or more clinically detected pregnancies occurring within 24 weeks of gestation. No identifiable cause has been identified for nearly 50% of these cases. This group is referred to as idiopathic recurrent spontaneous miscarriage (IRSM) or miscarriage of unknown origin. Due to lack of robust scientific evidence, guidelines on the diagnosis and management of IRSM are not well defined and often contradictory. This motivates us to explore the vibrational fingerprints of endometrial tissue in these women. Endometrial tissues were collected from women undergoing IRSM (n = 20) and controls (n = 20) corresponding to the window of implantation. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra were obtained within the range of 400-4000 cm-1 using Agilent Cary 630 FTIR spectrometer. Raman spectra were also generated within the spectral window of 400-4000 cm-1 using Thermo Fisher Scientific, DXR Raman spectrophotometer. Based on the limited molecular information provided by a single spectroscopic tool, fusion strategy combining Raman and ATR-FTIR spectroscopic data of IRSM is proposed. The significant features were extracted applying principal component analysis (PCA) and wavelet threshold denoising (WTD) and fused spectral data used as input into support vector machine (SVM), adaptive boosting (AdaBoost) and decision tree (DT) models. Altered molecular vibrations associated with proteins, glutamate, and lipid metabolism were observed in IRSM using Raman spectroscopy. FTIR analysis indicated changes in the molecular vibrations of lipids and proteins, collagen dysregulation and impaired glucose metabolism. Combination of both spectroscopic data using mid-level fusion (MLF: 92% using AdaBoost and DT models) and high-level fusion (HLF: 92% using SVM models) methods showed improved IRSM classification accuracy as compared to individual spectral models. Our results indicate that spectral fusion technology hold promise in enhancing diagnostic accuracy of IRSM in clinical settings. Validation of these findings in a larger patient population is underway.

Cigarette paper as evidence: Forensic profiling using ATR-FTIR spectroscopy and machine learning algorithms.

This research highlights the underestimated significance of cigarette paper as evidence at crime scenes. The primary objective is to distinguish cigarette paper from similar-looking alternatives, addressing the first research objective. The second objective involves identifying cigarette paper brands using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and machine learning (ML) algorithms. Accurate differentiation of cigarette paper from normal paper is emphasized. ATR-FTIR spectroscopy, coupled with principal component analysis (PCA) for dimensionality reduction, is employed for brand identification. Among fifteen ML algorithms compared, the CatBoost classifier excels for both objectives. This research presents a non-destructive, effective method for studying cigarette paper, contributing valuable insights to crime scene investigations.

Iron (hydr)oxides-induced activation of sulfite for contaminants degradation: The critical role of structural Fe(III).

Iron-based sulfite (S(IV)) activation has emerged as a novel strategy to generate sulfate radicals (SO4•-) for contaminants degradation. However, numerous studies focused on dissolved iron-induced homogeneous activation processes while the potential of structural Fe(III) remains unclear. In this study, five iron (hydr)oxide soil minerals (FeOx) including ferrihydrite, schwertmannite, lepidocrocite, goethite and hematite, were successfully employed as sources of structural Fe(III) for S(IV) activation. Results showed that the catalytical ability of structural Fe(III) primarily depended on the crystallinity of FeOx instead of their specific surface area and particle size, with ferrihydrite and schwertmannite being the most active. Furthermore, in-situ ATR-FTIR spectroscopy and 2D-COS analysis revealed that HSO3- was initially adsorbed on FeO6 octahedrons of FeOx via monodentate inner-sphere complexation, ultimately oxidized into SO42- which was then re-adsorbed via outer-sphere complexation. During this process, strong oxidizing SO4•- and •OH were formed for pollutants degradation, confirmed by radical quenching experiments and electron spin resonance. Moreover, FeOx/S(IV) system exhibited superior applicability with respect to recycling test, real waters and twenty-six pollutants degradation. Eventually, plausible degradation pathways of three typical pollutants were proposed. This study highlights the feasibility of structural Fe(III)-containing soil minerals for S(IV) activation in wastewater treatment.

ATR-FTIR spectroscopy imaging of bone repair in mandibular laser-osteotomy.

The aim of this study was to verify the effectiveness of attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy in the characterization of bone repair in mandibular osteotomy using erbium, chromium-doped yttrium, scandium, gallium and garnet (Er,Cr:YSGG) laser and multilaminate drill on each side. Two mandible bone fragments were removed from 30 rabbits, and the process of bone repair was studied immediately, 3, 7, 15, 21, and 28 days after the surgery. The histological analysis allowed detecting differences in the early stages of tissue repair after bone cutting performed with the Er,Cr:YSGG laser or multilaminate drill. The ATR-FTIR spectroscopy technique was sensitive to changes in the organic content of bone tissue repair process.

Cysteamine Nanoemulsion Delivery by Inhalation to Attenuate Adverse Effects of Exposure to Cigarette Smoke: A Metabolomics Study in Wistar Rats.

There is a pressing need for novel pharmacological interventions and drug delivery innovations to attenuate the cigarette smoke-associated oxidative stress and lung disease. We report here on the attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and metabolomics of Wistar rats exposed to cigarette smoke for 28 days. The animals were treated for 15 days with plain cysteamine given orally or cysteamine as nanoemulsion given orally or via inhalation. The study design also included two control groups as follows: rats exposed to cigarette smoke but did not receive a treatment (diseased control group) and rats neither exposed to cigarette smoke nor a treatment (normal control group). The targeted metabolomics using Parallel Reaction Monitoring showed that in the diseased control group, ornithine, nicotinamide, xanthine, hypoxanthine, and caprolactam were increased compared with the normal control group. In addition, (±)8(9)-DiHET, which was initially downregulated in the diseased control group, exhibited a reversal of this trend with cysteamine nanoemulsion given via inhalation. The cysteamine nanoemulsion delivered by inhalation highlighted the importance of the route of drug administration for targeting the lungs. To the best of our knowledge, this is the first work to use ATR-FTIR and metabolomics in Wistar rat lung tissues, suggesting how cysteamine nanoemulsion can potentially reduce cigarette smoke-induced oxidative damage. The metabolites reported herein have potential implications for discovery of novel theranostics and, thus, to cultivate diagnostic and therapeutic innovation for early prevention and treatment of cigarette smoke-associated lung diseases.

Risk assessment of cigarette butts and microplastic pollution in a drinking and irrigation water basin of West Anatolia, Türkiye.

Cigarette butts (CBs) and Microplastics (MPs) have serious harmful effects on the environment and living organisms despite their small size. This research aims to investigate the abundance and pollution status of CBs and MPs in Tahtali Dam Basin (West Anatolia, Türkiye) which is the most important drinking and irrigation water resources. Clean Environment Index (CEI) and Cigarette Butt Pollution Index (CBPI) were used to determine pollution degree of the basin. The total number of CBs were 1.478 items, the total number of MPs were 477 items/m2 in the basin. As a result of this study, MP particles weren't found in Balaban Stream. Highest number of MP particles observed in 100-250 µm (45%) size class. The most abundant MP type and colour were, fragment (54%) and white (42%), respectively. Polyethylene terephthalate (50%) was the most abundant type of polymer according to the ATR- FTIR analysis. As a result of the CEI and CBPI, the upstream stations of the stream were classified as "clean" status, while downstream sampling points of the stream and Balaban Lake coasts were classified as "extremely dirty" status. The calculated volumes of MP particulates from mining facility, agricultural and recreational activities indicate that anthropogenic factors are the most important MP source in the Tahtali Dam Basin. This study is the first study about MP and CB pollution of the freshwater ecosystems in the region.

Quantification and polymeric characterization of microplastics in composts and their accumulation in lettuce.

Organic fertilizers have become a vector for the transport of microplastics (MPs), which pose human health concerns through the food chain. This study aimed to quantify and characterize MPs in eight different compost samples of various raw materials and their subsequent translocation to lettuce (Lacuta sativa) grown on contaminated composts. The results revealed that the MP abundance ranged from 3810 to 16530 MP/kg. Municipal solid waste compost (MSWC) had highest abundance (16082 ± 632 MP/kg), followed by leaf compost (LC) and organic compost (OC) (6299 ± 1011 and 3680 ± 419 MP/kg, respectively). MPs of <100 µm in size were most dominant in MSWC and LC. Fragments and fibers were the prevalent shape types, with white/transparent colored MPs being more abundant. Polyethylene (PE), polypropylene (PP) and polyethylene terephthalate (PET) were the dominant polymers. MPs accumulation in the lettuce leaves was greatest in the lettuce plants grown on MSWC, followed by those grown on LC and OC, indicating that MSWC grown lettuce is not suitable for human consumption. The decrease in the growth (leaf length, number of leaves, leaf fresh and weights) and physiological (membrane stability index, relative water contents) parameters of lettuce was in line with the trend of MP accumulations. Hence, it is highly important to regulate the plastic contents in compost because it is a threat to ecosystems and human health.

Assessment of microplastics in coastal ecosystem of Bangladesh.

Microplastics (MPs) pose one of the major environmental threats to marine organisms and ecosystems on a global scale. The present study investigated MPs in surface water, beach sediments, and fish in two coastal areas of Bangladesh namely Cox's Bazar and Kuakata. The MPs were identified and characterized using three different techniques, including the binocular microscope, the ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy), and SEM-EDS (Scanning Electron Microscopy- Energy Dispersive Spectroscopy). The number of MPs in seawater was 10.1 ± 3.10 and 8.52 ± 3.92 items/100 L and in beach sediment, 13.2 ± 3.68 and 9.48 ± 3.63 items/100 g in Cox's Bazar and Kuakata, respectively. In fish samples, the abundance of MPs was 7.82 ± 1.28 and 6.82 ± 1.87 items/individual species of Cox's Bazar and Kuakata, respectively, where the highest quantities of MP were found in Euthynnus affinisand Sillago sihama and the lowest in Terapon jarbua and Pampus chinensisin Cox's Bazar and Kuakata, respectively. The number of MPs in GITs (Gastrointestinal tracts) was 1.63 ± 0.991 and 1.25 ± 0.546 items/g GIT and in BW (Body Weight) were 0.042 ± 0.014 and 0.037 ± 0.014 items/g BW in Cox's Bazar and Kuakata, respectively. There revealed a positive correlation between MP abundance and GIT weight and body weight in fish species. MPs were predominantly fiber-shaped, white/transparent, and small size. The most common MP polymers were polyethylene and polypropylene. SEM images of MPs demonstrate surface roughness, cracks, mechanical weathering and oxidative weathering, demonstrating their ongoing environmental exposure. The EDS spectrum unearthed that the MPs contained several elements (C, N, O, Na, Al, Fe, and Si). Findings from this study might be useful in coastal plastic particle management and to mitigate the potential risks associated with them.

Comparative profiling of serum biomarkers and ATR-FTIR spectroscopy for differential diagnosis of patients with rheumatoid and psoriatic arthritis - a pilot study.

BACKGROUND: Rheumatoid arthritis (RA) and psoriatic arthritis (PsA) are chronic inflammatory diseases in which innate and adaptive responses of the immune system are induced. RA and PsA have complex signaling pathways. Despite the differences in their clinical presentation, there is a great demand for fast and accurate diagnosis of diseases to implement treatment and plan an individual therapeutic strategy quickly. In this report, we present the results of differential diagnosis of patients with RA and PsA and healthy subjects (C, control group), allowing for reliable differentiation of groups of rheumatoid patients based on biochemical parameters, attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectra, and combined data sets. MATERIALS AND METHODS: Biochemical analyses, ELISA (enzyme-linked immunosorbent assays), and multiplex assays were conducted for blood sera from patients with RA (n = 32), patients with PsA (n = 28), and the control group (n = 18). ATR-FTIR spectra were collected for lyophilized sera. RESULTS: The combination of six biochemical parameters (WBC, ESR, RF, CRP, HCC-4/CCL16, and HMGB1/HMGB) allowed the development of the partial least squares discriminant analysis (PLS-DA) model with an overall accuracy (OA) of 80% for test samples. The best separation between RA, PsA, and the control group was obtained utilizing spectral data. Using the interval PLS algorithm (iPLS) specific spectral ranges were selected and a classifier characterized by OA value for test set equal to 88% was obtained. This parameter, for the hybrid PLS-DA model constructed using selected biochemical parameters and a significantly reduced number of spectral variables, reached the level of 84%. CONCLUSIONS: PLS-DA models developed on the basis of spectral data enable effective differentiation of patients with RA, patients with PsA, and healthy subjects. They appeared to be insensitive to existing inflammation processes which opens interesting perspectives for new diagnostic tests and algorithms for identification of patients with RA and PsA.

Porphyrin Aluminum Metal-Organic Framework in Liquid Water, its Interaction with the Oxidized Organosulfur Compound Diethyl Sulfoxide, and its Sorption from Aqueous Solution.

Oxidized organosulfur compounds and, in particular, sulfoxides are of interest as solvents in the semiconductor and pharmaceutical industry, environmental contaminants, and simulants in deactivation of chemical warfare agents. An experimental study is reported of the interaction of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (Compound 2) with diethyl sulfoxide (DESO) in pure form and in aqueous solution. First, the suitability of Compound 2 as sorbent in aqueous solution was assessed; namely, its long-term stability (up to 15 days) in liquid water has been investigated at room temperature and under stirring. Here, a novel facile spectroscopic method has been used, a periodic micro-sampling of sorbent from suspension, followed by vacuum mini-filtration and an ex situ time-dependent attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) analysis. Next, the interaction of Compound 2 with pure liquid DESO under ambient conditions was investigated, which yields the stoichiometric adsorption complex (Al-MOF-TCPPH2)1(DESO)2 denoted Compound 3. In this adsorption complex, molecules of DESO interact with the OH group and carboxylate group of the sorbent. Then, the removal of DESO from Compound 3 was assessed, using facile treatment with warm water in the micro Soxhlet apparatus followed by the ATR FT-IR analysis. Finally, Compound 2 was tested in sorption of DESO from diluted aqueous solution. In the initial step, the sorption proceeds very quickly (in <1 min the concentration of DESO decreases by about 20%) followed by a much slower step. The maximum amount of adsorbed DESO corresponds to half of the amount adsorbed from pure DESO as found by the high-performance liquid chromatography-ultraviolet detection method. This adsorbed amount corresponds to 1 mol DESO adsorbate per mol of sorbent. Porphyrin aluminum metal-organic framework Compound 2 is promising for the removal of DESO from diluted aqueous solution, and it is of interest for the removal of similar oxidized organosulfur compounds.

Structural investigation of interactions between halogenated flavonoids and the lipid membrane along with their role as cytotoxic agents.

This study focuses on understanding the structural and molecular changes in lipid membranes under the influence of six halogenated flavonoid derivatives differing in the number and position of substitution of chlorine and bromine atoms (D1-D6). Utilizing various analytical techniques, including fluorometric methods, dynamic light scattering (DLS), attenuated Fourier transform infrared spectroscopy (ATR- FTIR), and FT-Raman spectroscopy, the research aims to elucidate the mechanisms underlying the interaction of flavonoids with cell membranes. Additionally, the study includes in silico analyses to explore the physicochemical properties of these compounds and their potential pharmaceutical applications, along with toxicity studies to assess their effects on cancer, normal, and red blood cells. Our study showed the ability of halogenated derivatives to interact mostly with the outer part of the membrane, especially in the lipid heads region however, some of them were able to penetrate deeper into the membrane and affect the fluidity of hydrocarbon chains. The potential to reduce cancer cell viability, the lack of toxicity towards erythrocytes, and the favourable physicochemical and pharmacokinetic properties suggest these halogenated flavonoids potential candidates for exploring their potential for medical use.

Probing the stability and quality of the cellulose-based Pickering emulsion containing sesamolin-enriched sesame oil by chemometrics-assisted ATR-FTIR spectroscopy.

This study presents the employment of Fourier transform infrared (FTIR) spectroscopy with attenuated total reflection and principal component analysis (PCA) to analyze the stability of a Pickering emulsion stabilized by carboxylated-cellulose nanocrystal (cCNC) comprising sesame oil phases with or without sesamolin. FTIR measurements identified an intermolecular hydrogen bond between the ester group of the triglyceride and the carboxyl group of the cCNC to create the emulsion droplet. The spectral bands from the hydroxyl group vibration (3700-3050 cm-1), carbonyl (1744 cm-1), CO groups of the ester triglyceride and cCNC (1160-998 cm-1) markedly discriminated between stabilized and destabilized emulsions. The PCA of FTIR spectra detected the change of molecular interaction during storage according to creaming, aggregation, and coalescence and changes in physicochemical parameters such as droplet size, refractive index, and zeta potential. Hence, PCA enabled the observation of the destabilization of emulsion in real-time.

An assessment of microplastic contamination in beach sediment of Maharashtra State, India, with special reference to anthropogenic activities.

The escalating issue of microplastic (MP) pollution poses a significant threat to the marine environment due to increasing plastic production and improper waste management. The current investigation was aimed at quantifying the MP concentration on 25 beaches on the Maharashtra coast, India. Beach sediments (1 kg) were collected from each site, with five replicates to evaluate the extent of MPs. The samples were homogenized, and three 20 g replicas were prepared for subsequent analysis. Later, the samples were sieved, and MPs were extracted using previously published protocols. The abundance of MPs found as 1.56 ± 0.79 MPs/g, ranges from 0.43 ± 0.07 to 3 ± 0.37 MPs/g. Fibers were found as the most abundant shape of MPs. Size-wise classification revealed dominance of <1 mm and 1-2 mm-sized MPs. Blue- and black-colored MPs were recorded dominantly. Polymer identification of MPs revealed polyurethane, polypropylene, polyvinyl chloride, acrylic or polymethyl methacrylate, and rubber. The findings revealed that MPs were found to be higher at highly impacted sites, followed by moderately impacted sites and low-impacted sites, possibly due to a different degree of anthropogenic pressure. The study recommended the urgent need for effective policy to prevent plastics accumulation in the coastal environment of Maharashtra State, India. PRACTITIONER POINTS: The study investigated the abundance and distribution of microplastics in the marine environment, specifically in sediments. The most common type of microplastic found was fibers, followed by fragments and films. Microplastics were found to pose a potential risk to the marine ecosystem, although further research is needed to fully understand their ecological impact. Future research should focus on expanding the sample size, assessing long-term effects, exploring sources and pathways, and considering size and shape of microplastics. The findings recommended urgent action to mitigate plastic pollution in Maharashtra coast.

The first reported values of microplastics in prostate.

BACKGROUND: Microplastics are ubiquitous, widespread environmental pollutants with unavoidable human exposure. Herein, it was aimed to investigate the presence of microplastics in prostate tissue. METHODS: Prostate tissues from 12 patients who underwent Trans Urethral Resection of the Prostate (TUR-P) were analyzed to investigate the presence of microplastics. Initially, the prostate tissues were analyzed for microplastic particles using a light microscope after extraction. Subsequently, the chemical composition of the particles found in the prostate tissues was characterized using Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectrophotometry. RESULTS: Microplastic particles of various types were detected in 6 out of 12 patients. All detected plastic particles in this study were microplastics, with sizes below 26 µm in size. These microplastics exhibited different shapes as pellets, spheres or fibers. Overall, among the 12 analyzed prostate tissue samples, four different types of plastic were identified in six samples. The most common type of microplastic detected was Polyamide (Nylon 6), found in samples from three patients. Other detected types, Polypropylene, Polyacrylic Acid and Poly (dimethylsiloxane) were each determined in samples from one patient. CONCLUSIONS: This is the first study to demonstrate the presence of microplastics in prostate tissue, serving as an exploratory investigation, which can trigger further research to validate the results in a larger patient cohort.

Optical biomarker analysis for renal cell carcinoma obtained from preoperative and postoperative patients using ATR-FTIR spectroscopy.

Renal cell carcinoma (RCC) is the most common malignant tumor in the urinary system, accounting for 80 % to 90 % for all renal malignancies. Traditional diagnostic methods like magnetic resonance imaging (MRI) and computed tomography (CT) lack the sensitivity and specificity as they lack specific biomarkers. These limitations impede effective monitoring of tumor recurrence. This study aims to employ Attenuated Total Reflection (ATR)-Fourier transform infrared (FTIR) spectroscopy, an optical technology sensitive to molecular groups, to analyze the potential optical biomarkers in urine and plasma samples from RCC patients pre- and post-surgery. The results reveal distinctive spectral information from both plasma and urine samples. Post-surgery urine spectra exhibit complexity compared to plasma, showing reduced content at 1072 cm-1, 1347 cm-1 and 1654 cm-1 bands, while increased content at 1112 cm-1, 1143 cm-1, 1447 cm-1, 3334 cm-1 and 3420 cm-1 bands. Utilizing machine learning models such as eXtreme Gradient Boosting (XGBoost), support vector machine (SVM), partial least squares (PLS), and artificial neural network (ANN), the study evaluated plasma and urine samples pre- and post-surgery. Remarkably, the XGBoost method excelled in distinguishing between tumor conditions and recovery, achieving an impressive AUC value of 0.99. These results underscore the potential of ATR-FTIR technology in identifying RCC optical biomarkers, with XGBoost showing promise as a valuable screening tool for RCC recurrence diagnosis.

Characterization of industrial TNT in ammunition shells: An in-depth study of artificial aging effects using Fourier-Transform infrared spectroscopy and gas chromatography-mass spectrometry.

In this study, we comprehensively investigated the degradation of industrial trinitrotoluene (TNT), focusing on the effects of aging and direct contact with steel surfaces, mirroring real-world usage conditions. While practical knowledge exists regarding this degradation, the existing literature lacks in-depth insights into the underlying processes. To address this gap, we conducted experiments using small steel samples, representative of military ammunition casings, which were coated with TNT and subjected to 30 days of heating at 75 °C under vacuum conditions. A subset of these samples was coated with a protective red alkyd paint. After the aging process, the TNT was carefully removed from the metal surfaces and subjected to a comprehensive analysis encompassing scanning electron microscopy, Fourier-transform infrared spectroscopy, and gas chromatography-mass spectrometry. Our results reveal a remarkable preservation of the chemical integrity of industrial TNT, even in the presence of thermal stress and direct steel contact. Although superficial changes were observed in the TNT's appearance, all analytical data consistently demonstrated the maintenance of its chemical composition. Notably, the sole change in composition was attributed to the presence of degradation products associated with the alkyd paint coating, rather than intrinsic TNT degradation. These findings underscore the negligible impact of degradation processes on TNT in scenarios involving the solid-phase thermal stress of TNT in direct contact with metal, significantly enhancing our understanding of TNT safety when packaged within steel artifacts-a common context in military ammunition.

Microplastics and plastisphere at surface waters in the Southwestern Caribbean sea.

Pollution generated by plastic waste has brought an environmental problem characterized by the omnipresence of smaller pieces of this material known as microplastics (MP). This issue was addresses by collecting samples with 250 µm pore size nets in two marine-coastal sectors of Southwestern Caribbean Sea during two contrasting seasons. Higher concentrations were found in rainy season than in dry season, reaching respectively 1.72 MP/m3 and 0.22 MP/m3. Within each sector, there were differences caused firstly by localities of higher concentrations of semi-closed water bodies localities during rainy season (Ciénaga Grande de Santa Marta and La Caimanera marsh), and secondly by lower concentrations of localities with less influenced of flow rates during dry season (Salamanca and Isla Fuerte). Moreover, the lowest concentration in dry season corresponding to La Caimanera marsh reflects how the community environmental management might decrease MP pollution. In both sectors and seasons, the particles of 0.3 mm (0.3-1.4 mm) size class dominated over those of 1.4 mm (1.4-5.0 mm) (reaching each respectively 1.33 MP/m3 and 0.39 MP/m3), with a dominance of fibers, except in the rainy season in Magdalena, where they were films. Using the FTIR technique, polypropylene was identified as the most abundant polymer in both sectors. The composition of the assemblage of microorganisms attached to microplastics presented higher richness and differed from that of free-living planktonic microbes. The most abundant members of the plastisphere were proteobacteria whose major representation was the pathogenic genus Vibrio, while the cyanobacteria dominated in seawater samples.

Differential effects of the lipidic and ionic microenvironment on NPP1's phosphohydrolase and phosphodiesterase activities.

Ecto-nucleotide pyrophosphatase/phosphodiesterase 1 (NPP1) is an enzyme present in matrix vesicles (MV). NPP1 participates on the regulation of bone formation by producing pyrophosphate (PPi) from adenosine triphosphate (ATP). Here, we have used liposomes bearing dipalmitoylphosphatidylcholine (DPPC), sphingomyelin (SM), and cholesterol (Chol) harboring NPP1 to mimic the composition of MV lipid rafts to investigate ionic and lipidic influence on NPP1 activity and mineral propagation. Atomic force microscopy (AFM) revealed that DPPC-liposomes had spherical and smooth surface. The presence of SM and Chol elicited rough and smooth surface, respectively. NPP1 insertion produced protrusions in all the liposome surface. Maximum phosphodiesterase activity emerged at 0.082 M ionic strength, whereas maximum phosphomonohydrolase activity arose at low ionic strength. Phosphoserine-Calcium Phosphate Complex (PS-CPLX) and amorphous calcium-phosphate (ACP) induced mineral propagation in DPPC- and DPPC:SM-liposomes and in DPPC:Chol-liposomes, respectively. Mineral characterization revealed the presence of bands assigned to HAp in the mineral propagated by NPP1 harbored in DPPC-liposomes without nucleators or in DPPC:Chol-liposomes with ACP nucleators. These data show that studying how the ionic and lipidic environment affects NPP1 properties is important, especially for HAp obtained under controlled conditions in vitro.

Enhancing Essential Oil Extraction from Lavandin Grosso Flowers via Plasma Treatment.

This study explores the impact of plasma treatment on Lavandin Grosso flowers and its influence on the extraction of essential oils (EOs) via hydrodistillation. Short plasma treatment times enhance the yield of EO extraction from 3.19% in untreated samples to 3.44%, corresponding to 1 min of plasma treatment, while longer treatment times (10 min) show diminishing returns to 3.07% of yield extraction. Chemical characterization (GC/MS and ATR-FTIR) indicates that plasma treatments do not significantly alter the chemical composition of the extracted EOs, preserving their aromatic qualities. Investigations into plasma-surface interactions reveal changes at the nanometer level, with XPS confirming alterations in the surface chemistry of Lavandin Grosso flowers by reducing surface carbon and increasing oxygen content, ultimately resulting in an increased presence of hydrophilic groups. The presence of hydrophilic groups enhances the interaction between the surface membrane of the glandular trichomes on Lavandin Grosso flowers and water vapor, consequently increasing the extraction of EOs. Furthermore, microscopic SEM examinations demonstrate that plasma treatments do not affect the morphology of glandular trichomes, emphasizing that surface modifications primarily occur at the nanoscale. This study underscores the potential of plasma technology as a tool to enhance EO yields from botanical sources while maintaining their chemical integrity.