Stability Indicating Method Development and Validation for the Estimation of Bempedoic Acid by RP-HPLC.

BACKGROUND: Bempedoic acid (BEM) belongs to a category of drugs known as Adenosine triphosphate-citrate Lyase (ACL) inhibitors. It is a prodrug with intracellular activation that is administered orally. Bempedoic acid is used to treat existing atherosclerotic cardiovascular diseases, mainly hypercholesterolemia. METHODS: For the stability-indicating assay, the HPLC method was employed using a Kromasil 100-5-C8 column (100 mm × 4.6 mm), a UV detector set at 230 nm, and a mobile phase comprising a 70:30 v/v mixture of acetonitrile and 0.1% Orthophosphoric Acid (OPA) buffer. The method was operated at an ambient temperature with a flow rate of 1 mL/min. The method developed has been statistically validated according to ICH guidelines. RESULTS: The stability-indicating method was executed using a Kromasil 100-5-C8 (100 mm × 4.6 mm) column at a 1.0 mL/min flow rate. A mixture of acetonitrile and 0.1% Orthophosphoric Acid (OPA) buffer in a 70:30 v/v ratio made up the mobile phase. BEM's retention times were discovered to be 1.88 minutes each. The temperature was kept at room temperature. 234 nm was the ideal wavelength for BEM. According to ICH criteria, the approach developed has undergone statistical validation. BEM's % RSD was discovered to be 0.6, respectively. For BEM, the % recovery was determined to be 100.0%. Regression models for bempedoic acid yielded LoD and LoQ values of 3.3 and 10.1 g/mL, respectively. The method showed good reproducibility and recovery with a % RSD less than 2. Studies on forced degradation confirmed the method's capacity to indicate stability in the presence of stress conditions, such as acid, basic, peroxide, UV, heat, and humidity. Both the retention times and the run time were shortened. CONCLUSION: In accordance with ICH Q2 (R1) guidelines, this method was successfully tested with HPLC to confirm the chemical structures of newly produced degradation products of bempedoic acid.

New insights into the anti-inflammatory and anti-melanoma mechanisms of action of azelaic acid and other Fusarium solani metabolites via in vitro and in silico studies.

Metabolites exploration of the ethyl acetate extract of Fusarium solani culture broth that was isolated from Euphorbia tirucalli root afforded five compounds; 4-hydroxybenzaldehyde (1), 4-hydroxybenzoic acid (2), tyrosol (3), azelaic acid (4), malic acid (5), and fusaric acid (6). Fungal extract as well as its metabolites were evaluated for their anti-inflammatory and anti-hyperpigmentation potential via in vitro cyclooxygenases and tyrosinase inhibition assays, respectively. Azelaic acid (4) exhibited powerful and selective COX-2 inhibition followed by fusaric acid (6) with IC50 values (2.21 ± 0.06 and 4.81 ± 0.14 µM, respectively). As well, azelaic acid (4) had the most impressive tyrosinase inhibitory effect with IC50 value of 8.75 ± 0.18 µM compared to kojic acid (IC50 = 9.27 ± 0.19 µM). Exclusive computational studies of azelaic acid and fusaric acid with COX-2 were in good accord with the in vitro results. Interestingly, this is the first time to investigate and report the potential of compounds 3-6 to inhibit cyclooxygenase enzymes. One of the most invasive forms of skin cancer is melanoma, a molecular docking study using a set of enzymes related to melanoma suggested pirin to be therapeutic target for azelaic acid and fusaric acid as a plausible mechanism for their anti-melanoma activity.

Analytical method development and validation for simultaneous estimation of Bempedoic acid and Ezetimibe in pure and its pharmaceutical dosage form by RP-HPLC.

A simple, accurate and precise method was developed for the simultaneous estimation of the bempedoic acid and ezetimibe in pure and tablet dosage form. The developed method was validated as per International Conference on Harmonization guidelines. The chromatographic separation was achieved isocratically on a Waters- C18, 250 × 4.6 mm, 5 µm column. Mobile phase containing K2HPO4-methanol in the ratio 60:40 in buffer at pH 4.3 was pumped through column at a flow rate of 1.0 ml/min. The temperature was maintained at 25°C. The optimized wavelength selected was 242 nm. The separation of bempedoic acid and ezetimibe showed retention times of 3.090 and 4.268 min respectively. The RSD values of the bempedoic acid and ezetimibe were 0.34 and 0.08 respectively. The accuracy of method was determined at three levels (50,100 and 150%). The percentage recovery was obtained as 100.0 and 100.0% for bempedoic acid and ezetimibe, respectively. The limits of determination and quantitation obtained from regression equations of bempedoic acid and ezetimibe were 1.065, 3.550 and 0.203, 0.677, respectively. The regression equation of bempedoic acid is y = 20,795x + 24,168, and it is y = 6,885.7x + 11,000 for ezetimibe. The retention times were decreased and the run time was decreased, so that the method developed is simple and economical that can be adopted for regular quality control tests in industry.

Impact of pH on Gas-Particle Partitioning of Semi-Volatile Organics in Multicomponent Aerosol.

The partitioning of semivolatile organic compounds (SVOCs) between the condensed and gas phases can have significant implications for the properties of aerosol particles. In addition to affecting size and composition, this partitioning can alter radiative properties and impact cloud activation processes. We present measurements and model predictions on how activity and pH influence the evaporation of SVOCs from particles to the gas phase, specifically investigating aqueous inorganic particles containing dicarboxylic acids (DCAs). The aerosols are studied at the single-particle level by using optical trapping and cavity-enhanced Raman spectroscopy. Optical resonances in the spectra enable precise size tracking, while vibrational bands allow real-time monitoring of pH. Results are compared to a Maxwell-type model that accounts for volatile and nonvolatile solutes in aqueous droplets that are held at a constant relative humidity. The aerosol inorganic-organic mixture functional group activity coefficients thermodynamic model and Debye-Hückel theory are both used to calculate the activities of the species present in the droplet. For DCAs, we find that the evaporation rate is highly sensitive to the particle pH. For acidity changes of approximately 1.5 pH units, we observe a shift from a volatile system to one that is completely nonvolatile. We also observe that the pH itself is not constant during evaporation; it increases as DCAs evaporate, slowing the rate of evaporation until it eventually ceases. Whether a DCA evaporates or remains a stable component of the droplet is determined by the difference between the lowest pKa of the DCA and the pH of the droplet.

Bio-based poly(hexamethylene 2,5-furandicarboxylate-co-2,6-naphthalate) copolyesters: a study of thermal, mechanical, and gas-barrier properties.

A series of poly(hexamethylene 2,5-furandicarboxylate-co-2,6-naphthalate) copolyesters were synthesized using various amounts of poly(hexylene 2,5-furandicarboxylate) (PHF) and poly(hexylene 2,6-naphthalate) (PHN) via melt polymerization. The effects of introducing 2,6-naphthalene dicarboxylic acid (NDCA) on the thermal, mechanical, and gas-barrier properties were investigated. When the NDCA content was less than 30 mol%, the temperatures of crystallization (Tc) and melting (Tm) decreased as the amount of NDCA was increased owing to disturbance of the polymer-chain regularity. When the NDCA content was above 50 mol%, the Tc and Tm of the materials increased as the NDCA content was increased, showing that the dominant crystallization behavior varied from 2,5-furandicarboxylic acid to NDCA. Hence, the glass transition temperature (Tg) increased as the NDCA content was increased, which was attributed to the incorporation of NDCA with a more rigid naphthalate structure compared with the furan ring. The gas-barrier properties of the samples were observed to improve with the introduction of NDCA; this tendency could be explained by the ß-relaxation behavior and free volume values of the samples in the amorphous state. The activation energy (Ea) of ß-relaxation increased with the NDCA content, indicating that higher amounts of energy were needed to trigger the onset of long-range molecular motions. Free-volume calculations of the polymer structure showed that the introduction of NDCA hindered the space for gas penetration. For these reasons, the gas-barrier properties were improved and evaluated.

Nickel(II) Coordination Polymers Supported by Bis-pyridyl-bis-amide and Angular Dicarboxylate Ligands: Role of Ligand Flexibility in Iodine Adsorption.

Reactions of N'N'-bis(3-pyridylmethyl)oxalamide (L1), N'N'-bis(4-pyridylmethyl)oxalamide (L2), or N,N'-bis(3-pyridylmethyl)adipoamide) (L3) with angular dicarboxylic acids and Ni(II) salts under hydro(solvo)thermal conditions afforded a series of coordination polymers: {[Ni(L1)(OBA)(H2O)]·H2O}n (H2OBA = 4,4-oxydibenzoic acid), 1, {[Ni(L1)(SDA)(H2O)2]·H2O·CH3OH}n (H2SDA = 4,4-sulfonyldibenzoic acid), 2, {[Ni(L2)(OBA)]·C2H5OH}n, 3, {[Ni(L2)(OBA)]·CH3OH}n, 4, {[Ni2(L2)(SDA)2(H2O)3]·5H2O}n, 5, {[Ni2(L2)(SDA)2(H2O)3]·H2O·2C2H5OH}n, 6, {[Ni(L3)(OBA)(H2O)2]·2H2O}n, 7, {[Ni(L3)(SDA)(H2O)2]·2H2O}n, 8, and {[Ni(L3)0.5(SDA)(H2O)2]·0.5C2H5OH}n, 9, which have been structurally characterized by using single-crystal X-ray crystallography. Complex 1 exhibits an interdigitated 2D layer with the 2,4L2 topology and 2 is a 2D layer with the sql topology, while 3 and 4 are 3D frameworks resulting from polycatenated 2D nets with the sql topology and 5 and 6 are 2-fold interpenetrated 3D frameworks with the dia topology. Complexes 7 and 8 are 1D looped chains and 9 is a 2D layer with the 3,4L13 topology. The various structural types in 1-9 indicate that the structural diversity is subject to the flexibility and donor atom position of the neutral spacer ligands and the identity of the angular dicarboxylate ligands, while the role of the solvent is uncertain. The iodine adsorption of 1-9 was also investigated, demonstrating that that the flexibility of the spacer L1-L3 ligands can be an important factor that governs the feasibility of the iodine adsorption. Moreover, complex 9 shows a better iodine adsorption and encapsulates 166.55 mg g-1 iodine in the vapor phase at 60 °C, which corresponded to 0.38 molecules of iodine per formula unit.

Hypoxia-Responsive Gene Editing to Reduce Tumor Thermal Tolerance for Mild-Photothermal Therapy.

Near-infrared (NIR)-light-triggered photothermal therapy (PTT) is usually associated with undesirable damage to healthy organs nearby due to the high temperatures (>50 °C) available for tumor ablation. Low-temperature PTT would therefore have tremendous value for clinical application. Here, we construct a hypoxia-responsive gold nanorods (AuNRs)-based nanocomposite of CRISPR-Cas9 for mild-photothermal therapy via tumor-targeted gene editing. AuNRs are modified with azobenzene-4,4'-dicarboxylic acid (p-AZO) to achieve on-demand release of CRISPR-Cas9 using hypoxia-responsive azo bonds. In the hypoxic tumor microenvironment, the azo groups of the hypoxia-activated CRISPR-Cas9 nanosystem based on gold nanorods (APACPs) are selectively reduced by the overexpression of reductases, leading to the release of Cas9 and subsequent gene editing. Owing to the knockout of HSP90α for reducing the thermal resistance of cancer cells, highly effective tumor ablation both in vitro and in vivo was achieved with APACPs under mild PTT.

SAR insights into TET2 catalytic domain inhibition: Synthesis of 2-Hydroxy-4-Methylene-pentanedicarboxylates.

The TET (Ten-Eleven Translocation) dioxygenase enzyme family comprising 3 members, TET1-3, play key roles in DNA demethylation. These processes regulate transcription programs that determine cell lineage, survival, proliferation, and differentiation. The impetus for our investigations described here is derived from the need to develop illuminating small molecule probes for TET enzymes with cellular activity and specificity. The studies were done so in the context of the importance of TET2 in the hematopoietic system and the preponderance of loss of function somatic TET2 mutations in myeloid diseases. We have identified that 2-hydroxy-4-methylene-pentanedicarboxylic acid 2a reversibly competes with the co-substrate α-KG in the TET2 catalytic domain and inhibits the dioxygenase activity with an IC50 = 11.0 ± 0.9 µM at 10 µM α-KG in a cell free system and binds in the TET2 catalytic domain with Kd = 0.3 ± 0.12 µM.

Preparation of a new magnetic ion-imprinted polymer and optimization using Box-Behnken design for selective removal and determination of Cu(II) in food and wastewater samples.

A new magnetic Cu(II) IIP (Fe3O4@IIP-IDC) is synthesized by polymerization of Imidazole-4,5-dicarboxylic acid functionalized Allyl chloride, and significant improvement of its performance has been compared. SPE parameters were optimized using Box-Behnken design to achieve the twin objectives of quantitative determination and removal of Cu(II). FLPSO kinetic model and BS isotherm model fits well with the capacity of 175 mg g-1. Analytical figures of merit includes a linearity range of 10-5,000 µg L-1 (R2 = 0.9986), preconcentration factor of 50 after eluting with 5 mL of 1 M HNO3, LOD of 1.03 µg L-1 and LOQ of 4.5 µg L-1. Accuracy was assessed by analysis of SRM (Standard Reference Material) and recovery experiments after spiking in food samples (Tea, coffee, chocolate, spinach, infant milk substitute) and battery wastewater. Ease of use, reusability (15 cycles), rapid adsorption and high selectivity makes it a promising candidate for efficient and selective removal and trace determination.

Increased Production of ω-Hydroxynonanoic Acid and α,ω-Nonanedioic Acid from Olive Oil by a Constructed Biocatalytic System.

ω-Hydroxynonanoic acid and α,ω-nonanedioic acid are used for synthesizing diverse chemicals. Although biological methods are developed, their concentrations are low due to the toxicity of high concentrations of the hydrophobic chemicals toward biocatalysts. Here, we constructed a biocatalytic system with high productivity by adding an adsorbent resin and a strong base anion-exchange resin, reducing the solubility of ω-hydroxynonanoic acid and α,ω-nonanedioic acid, feeding ω-hydroxynonanoic acid, and introducing a cofactor regeneration system. The constructed biocatalytic system converted 300 mM (83.9 g L-1) and 154 mM (43.5 g L-1) oleic acid in the olive oil hydrolysate obtained after resin extraction, which were derived from 110 and 54 g L-1 olive oil, respectively, into 202 mM (35.2 g L-1) ω-hydroxynonanoic acid and 103 mM (19.4 g L-1) α,ω-nonanedioic acid, which are 21- and 24-fold higher values than the previously reported results, respectively. This study may contribute to the industrial biosynthesis of ω-hydroxynonanoic acid and α,ω-nonanedioic acid from olive oil.

New Dihydroxytyrosyl Esters from Dicarboxylic Acids: Synthesis and Evaluation of the Antioxidant Activity In Vitro (ABTS) and in Cell-Cultures (DCF Assay).

New dihydroxytyrosyl esters 2a, 2c-2j of dicarboxylic acids were synthesized from methyl orthoformate protected hydroxytyrosol 3 and diacyl chlorides. New compounds were characterized (HRMS, FT-IR, 1H- and 13C-NMR), and tested for antioxidant activity both in vitro (ABTS) and on L6 myoblasts and THP1 leukemic monocytes cell culture by DCF assay. According to the ABTS assay, compounds 2a, 2c-2j showed a TEAC value of antioxidant capacity up to twice that of Trolox. Very high or complete ROS protections were obtained in the cell environment where lipophilicity and rigidity of dicarboxylic structure seem to facilitate the antioxidant effect. MTT assay and proliferation test were used for assessment of cell viability. These compounds can be envisaged as a new class of preservatives for food or cosmetic products.

Investigation into the influence of an acrylic acid acceptor in organic D-π-A sensitizers against phototoxicity.

Photodynamic therapy (PDT) is a non-invasive, selective, and cost-effective cancer therapy. We previously reported that thiophene-based organic D-π-A sensitizers consist of an electron-donating (D) moiety, a π-conjugated bridge (π) moiety, and an electron-accepting (A) moiety, and are readily accessible and stable templates for photosensitizers that could be used in PDT. In addition, acrylic acid acceptor-containing photosensitizers exert a high level of phototoxicity. This study was an investigation into 1) the possibility of increasing phototoxicity by introducing another carboxyl group or by replacing a carboxyl group with a pyridinium group, and 2) the importance of an alkene in the acrylic acid acceptor for phototoxicity. A review of the design, synthesis, and evaluation of sensitizers revealed that neither dicarboxylic acid nor pyridinium photosensitizers enhance phototoxicity. An evaluation of a photosensitizer without an alkene in the acrylic acid moiety revealed that the alkene was not indispensable in the pursuit of phototoxicity. The obtained results provided new insight into the design of ideal D-π-A photosensitizers for PDT.

Oral Azelaic Acid Ester Decreases Markers of Insulin Resistance in Overweight Human Male Subjects.

BACKGROUND/AIM: Insulin resistance (IR) is linked to increased risk of cardiovascular disease and cancer. We examined safety and efficacy of the natural product diethyl azelate (DEA) in overweight males with a varying degree of IR. PATIENTS AND METHODS: Seventeen subjects [age 18-42, hemoglobin A1c (A1c) of 5.2-6.2%] received orally 1 mg/kg DEA daily for 21 days. Blood plasma glucose, insulin and lipid levels were assessed before and after treatment. RESULTS: DEA was well tolerated without hypoglycemia or adverse effects except transient diarrhea (n=1). DEA significantly reduced fasting glucose by 6.06 mg/dl (n=8) and insulin by 37.8% (n=8) in subjects with IR and/or A1c ≥5.6%. Furthermore, it improved cholesterol/HDL, LDL/HDL, and non-cholesterol HDL/HDL by 5.4, 6.5, and 6.6%, respectively in all subjects, and by 8.0, 9.8, and 9.8%, respectively in 9 subjects with A1c ≥5.6%. CONCLUSION: DEA efficacy correlates with the degree of IR. DEA holds promise as a novel treatment for the management of IR.

Synthesis, Crystal Structures and Luminescence Properties of Three New Cadmium 3D Coordination Polymers.

: The new rigid planar ligand 2,5-bis(3-(pyridine-4-yl)phenyl)thiazolo[5,4-d]thiazole (BPPT) has been synthesized, which is an excellent building block for assembling coordination polymer. Under solvothermal reaction conditions, cadmium ion with BPPT in the presence of various carboxylic acids including (1,1'-biphenyl)-4,4'-dicarboxylic acid (BPDC), isophthalic acid (IP), and benzene-1,3,5-tricarboxylic acid (BTC) gave rise to three coordination complexes, viz, [Cd(BPPT)(BPDA)](BPPT)n (1), [Cd(BPPT) (IP)] (CH3OH) (2), and [Cd3(BPPT)3(BTC)2(H2O)2] (3). The structures of 1, 2, and 3 were characterized by single crystal X-ray diffraction. The IR spectra as well as thermogravimetric and luminescence properties were also investigated. Complex 1 is a two-dimensional (2D) network and further stretched to a 3D supramolecular structure through π-π stacking interaction. The complexes 2 and 3 show 3D framework. The complexes 1, 2, and 3 exhibited luminescence property at room temperature.

Engineering Stable Pseudomonas putida S12 by CRISPR for 2,5-Furandicarboxylic Acid (FDCA) Production.

FDCA (2,5-furandicarboxylic acid) can be enzymatically converted from HMF (5-hydroxymethylfurfural). Pseudomonas putida S12 is promising for FDCA production, but generating stable P. putida S12 is difficult due to its polyploidy and lack of genome engineering tools. Here we showed that coupling CRISPR and λ-Red recombineering enabled one-step gene integration with high efficiency and frequency, and simultaneously replaced endogenous genes in all chromosomes. Using this approach, we generated two stable P. putida S12 strains expressing HMF/furfural oxidoreductase (HMFH) and HMF oxidase (HMFO), both being able to convert 50 mM HMF to ≈42-43 mM FDCA in 24 h. Cosupplementation of MnO2 and CaCO3 to the medium drastically improved the cell tolerance to HMF and enhanced FDCA production. Cointegrating HMFH and HMFT1 (HMF transporter) genes further improved FDCA production, enabling the cells to convert 250 mM HMF to 196 mM (30.6 g/L) FDCA in 24 h. This study implicates the potentials of CRISPR for generating stable P. putida S12 strains for FDCA production.

Selective adsorption mechanisms of pharmaceuticals on benzene-1,4-dicarboxylic acid-based MOFs: Effects of a flexible framework, adsorptive interactions and the DFT study.

The synergetic effects of benzene-1,4-dicarboxylic acid (BDC) linker structure and the metal cluster of MOFs on adsorption mechanisms of carbamazepine, ciprofloxacin and mefenamic acid were investigated in single and mixed solutions. A 1D flexible framework MIL-53(Al), 3D rigid framework UiO-66(Zr) and 3D flexible framework MIL-88B(Fe) were applied as adsorbents. The breathing effect of MIL-53(Al) caused by its flexible structure can enhance intraparticle diffusion for all pharmaceuticals and perform a critical role in excellent adsorption performances. The 3D rigid BDC structure of UiO-66(Zr) caused a steric effect that reflected low or negligible adsorption. Unless concerning accessibility through the internal structure of the MOFs, the binding strengths calculated by the DFT study were in the following order: MIL-88B(Fe) > MIL-53(Al) > UiO-66(Zr). The Fe cluster in MIL-88B(Fe) seems to have the highest affinity for the carboxylic group of pharmaceuticals compared with Al and Zr; however, the lower porosity of MIL-88B(Fe) might limit the adsorption capacity. Moreover, in mixed solutions, the higher acidity of mefenamic acid can enhance competitive performance in interactions with the metal cation cluster of each MOF. Together with the breathing effect, H-bonding and π-π interaction were shown to be the alternative interactions of synergetic adsorption mechanisms.

Co-delivery of brinzolamide and miRNA-124 by biodegradable nanoparticles as a strategy for glaucoma therapy.

Co-delivery nanoparticles with characteristics of intracellular precision release drug have been generally accepted as an effective therapeutic strategy for eye diseases. In this study, we designed a new co-delivery system (miRNA/NP-BRZ) as a lasting therapeutic approach to prevent the neuro-destructive after the long-term treatment of glaucoma. Neuroprotective and intraocular pressure (IOP) response were assessed in in vivo and in vitro models of glaucoma. At the meaning time, we describe the preparation of miRNA/NP-BRZ, drug release characteristics, intraocular tracing, pharmacokinetic and pharmacodynamics study and toxicity test. We found that miRNA/NP-BRZ could remarkably decrease IOP and significantly prevent retinal ganglion cell (RGC) damages. The new formula of miRNA-124 encapsulated in PEG-PSA-BRZ nanoparticles exhibits high encapsulation efficiency (EE), drug-loading capacity (DC), and stable controlled-release efficacy (EC). Moreover, we also verified that the miRNA/NP-BRZ system is significantly neuroprotective and nontoxic as well as lowering IOP. This study shows our co-delivery drug system would have a wide potential on social and economic benefits for glaucoma.

Self-Assembled Cagelike Receptor That Binds Biologically Relevant Dicarboxylic Acids via Proton-Coupled Anion Recognition.

We report here a fully organic, self-assembled dimeric receptor, constructed from acyclic naphthyridyl-polypyrrolic building blocks. The cagelike dimer is stable in the solid state, in solution, and in gas phase, as inferred from X-ray diffraction and spectroscopic analyses. This system acts as a receptor for oxalic acid, maleic acid, and malonic acid in the solid state and in THF solution. In contrast, acetic acid, propionic acid, adipic acid, and succinic acid, with pKa values > ca. 2.8, were not bound effectively within the cagelike cavity. It is speculated that oxalic acid, maleic acid, and malonic acid serve to protonate the naphthyridine moieties of the host, which then favors binding of the corresponding carboxylate anions via hydrogen-bonding to the pyrrolic NH protons. The present naphthyridine-polypyrrole dimer is stable under acidic conditions, including in the presence of 100 equiv trifluoroacetic acid (TFA), p-toluenesulfonic acid (PTSA), H2SO4, and HCl. However, disassembly may be achieved by exposure to tetrabutylammonium fluoride (TBAF). Washing with water then regenerates the cage. This process of assembly and disassembly could be repeated >20 times with little evidence of degradation. The reversible nature of the present system, coupled with its dicarboxylic acid recognition features, leads us to suggest it could have a role to play in effecting the controlled "capture" and "release" of biologically relevant dicarboxylic acids.

Synthesis of Novel Structural Hybrids between Aza-Heterocycles and Azelaic Acid Moiety with a Specific Activity on Osteosarcoma Cells.

Nine compounds bearing pyridinyl (or piperidinyl, benzimidazolyl, benzotriazolyl) groups bound to an azelayl moiety through an amide bond were synthesized. The structural analogy with some histone deacetylase inhibitors inspired their syntheses, seeking new selective histone deacetylase inhibitors (HDACi). The azelayl moiety recalls part of 9-hydroxystearic acid, a cellular lipid showing antiproliferative activity toward cancer cells with HDAC as a molecular target. Azelayl derivatives bound to a benzothiazolyl moiety further proved to be active as HDACi. The novel compounds were tested on a panel of both normal and tumor cell lines. Non-specific induction of cytotoxicity was observed in the normal cell line, while three of them induced a biological effect only on the osteosarcoma (U2OS) cell line. One of them induced a change in nuclear shape and size. Cell-cycle alterations are associated with post-transcriptional modification of both H2/H3 and H4 histones. In line with recent studies, revealing unexpected HDAC7 function in osteoclasts, molecular docking studies on the active molecules predicted their proneness to interact with HDAC7. By reducing side effects associated with the action of the first-generation inhibitors, the herein reported compounds, thus, sound promising as selective HDACi.

Effect of organic acid on cyanidin-3-O-glucoside oxidation mediated by iron in model Chinese bayberry wine.

Cyanidin-3-O-glucoside (C3G) is principal anthocyanin in Chinese bayberry wine and its degradation is main problem with respect to wine color. Effect of five organic acids existing in bayberry wine on C3G oxidation mediated by iron was investigated in model wine. Fe(II) oxidation was found to follow a decreasing order in oxalate > citrate > tartrate > malate model wine whereas it hardly occurred in succinate model wine. The C3G oxidation mediated by iron followed an increasing order in citrate > oxalate > succinate > malate > tartrate model wine. More degradation products were observed in succinate, malate and tartrate model wine than in citrate and oxalate model wine. C3G degradation mediated by Fe(III) was faster than that mediated by Fe(II) in oxalate, succinate, malate, and tartrate model wine, but not in citrate model wine. C3G oxidation mediated by iron is probably not main mechanism of anthocyanin degradation in bayberry wine.