Effect of different surface roughening treatment on polyether ether ketone and acrylic resin bonding: A pilot study.

BACKGROUND: As polyether ether ketone (PEEK) is a relatively new material in dentistry, its bonding properties with regard to dental acrylic base materials are not fully known. To ensure the long-term success of removable dentures with a PEEK framework, the base materials must be well bonded to each other. OBJECTIVES: The study aimed to investigate the effects of different kinds of surface roughening treatment on PEEK and acrylic resin bonding. MATERIAL AND METHODS: Eighty PEEK specimens (N = 80) were randomly divided into 5 groups (n = 16 per group) and subjected to various surface roughening treatment (control, grinding, sandblasting, tribochemical silica coating (CoJet), and sulfuric acid etching). Heat-polymerized acrylic resin was applied to the treated surfaces of the PEEK specimens. The shear bond strength (SBS) test, environmental scanning electron microscopy (ESEM) analysis and three-dimensional (3D) surface topography analysis were performed. The statistical analysis of the data was conducted using the analysis of variance (ANOVA) and Tukey's multiple comparison test. RESULTS: The one-way ANOVA showed significant differences in the SBS values between the groups (p = 0.001). Sandblasting, tribochemical silica coating and sulfuric acid etching resulted in high SBS values (p = 0.001). The highest SBS values were observed in the sulfuric acid etching group (8.83 ±3.63 MPa), while the lowest SBS values were observed in the control group (3.33 ±2.50 MPa). CONCLUSIONS: The additional roughening treatment applied to the PEEK surface increases the bond strength with heat-polymerized acrylic resin.

Surface Bioactivation of Polyether Ether Ketone (PEEK) by Sulfuric Acid and Piranha Solution: Influence of the Modification Route in Capacity for Inducing Cell Growth.

The aim of this study was to promote bioactivity of the PEEK surface using sulfuric acid and piranha solution. PEEK was functionalized by a sulfuric acid treatment for 90 s and by piranha solution for 60 and 90 s. Chemical modification of the PEEK surface was evaluated by infrared spectroscopy, contact angle analysis, cytotoxicity, cell adhesion and proliferation. The spectroscopy characteristic band associated with sulfonation was observed in all treated samples. PEEK with piranha solution 60 s showed an increase in the intensity of the bands, which was even more significant for the longer treatment (90 s). The introduction of the sulfonic acid functional group reduced the contact angle. In cytotoxicity assays, for all treatments, the number of viable cells was higher when compared to those of untreated PEEK. PEEK treated with sulfuric acid and piranha solution for 60 s were the treatments that showed the highest percentage of cell viability with no statistically significant differences between them. The modified surfaces had a greater capacity for inducing cell growth, indicative of effective cell adhesion and proliferation. The proposed chemical modifications are promising for the functionalization of PEEK-based implants, as they were effective in promoting bioactivation of the PEEK surface and in stimulating cell growth and proliferation.

In vitro targeting and selective killing of mcf-7 and colo320dm cells by 5-fluorouracil anchored to carboxylated SWCNTs and MWCNTs.

The intention of the present work was to synthesize the f-MWCNT and f-SWCNT terminated with proper functional group, loading of 5-Flurouracil and to perform cytotoxic activity. Functionalization of MWCNTs and SWCNTs was achieved through the acid treatment (H2SO4 + HNO3). 5-flurouracil was loaded into the prepared functionalized CNTs, thereafter; in vitro drug loading capacity and % drug release were calculated. Also the prepared f-CNTs, 5-flurouracil loaded CNTs were distinguished by using SEM, TGA, DSC, X-ray diffraction, Raman and FTIR spectroscopy. MCF-7 and COLO320DM cells were treated with selected concentrations of 5-FU loaded f-MWCNTs and f-SWCNTs to estimate the cytotoxic activity. It was observed that 5-FU loaded f-SWCNTs showed good activity against selected cell lines than others. Moreover, apoptosis percentage was reported to be 84.46 ± 4.3515 and 92.78 ± 2.6549 for 5-FU loaded f-SWCNTs against MCF-7 and COLO320DM cells respectively. It is evident from the results that the prepared drug loaded CNTs have comparable antitumor activity in cancer cell lines.

Preparation, characterization, antioxidant and anti-inflammatory activities of acid-soluble pectin from okra (Abelmoschus esculentus L.).

Currently, there are few studies on acid-soluble pectin from okra, especially in biological activity for antioxidant and anti-inflammatory. In this study, the antioxidant properties of acid-soluble okra pectin components and their anti-inflammatory were explored. Firstly, two acid-soluble okra pectic fractions, namely crude acid-soluble okra pectin (CAOP) and acid-soluble okra pectin (AOP), were obtained and exhibited structural and compositional variation. The two pectic fractions contained a low degree of esterification (42.0-46.5%) and a relatively high uronic acid content (31.6-37.3%). AOP was composed of galacturonic acid (79.1 mol/%), galactose (4.3 mol/%), rhamnose (14.5 mol/%) and xylose (2.1 mol/%), and the molecular weight was 92.8 kDa. Morphological and thermal properties of acid-soluble okra pectin components were also investigated. Compared to CAOP, AOP expressed better antioxidant activity, and suppressed the NO production in LPS-induced RAW 264.7 macrophages. All the above results indicated that AOP had the potential to act as a natural antioxidant or a functional anti-inflammatory food, which would broaden the development and utilization of okra resources.

Obtaining hemicellulosic hydrolysate from sugarcane bagasse for microbial oil production by Lipomyces starkeyi.

OBJECTIVE: The extraction of the hemicellulose fraction of sugarcane bagasse (SCB) by acid hydrolysis was evaluated in an autoclave and a Parr reactor aiming the application of the hydrolysate as a carbon source for lipid production by Lipomyces starkeyi. RESULTS: The hydrolysis that resulted in the highest sugar concentration was obtained by treatment in the Parr reactor (HHR) at 1.5% (m/v) H2SO4 and 120 °C for 20 min, reaching a hemicellulose conversion of approximately 82%. The adaptation of the yeast to the hydrolysate provided good fermentability and no lag phase. The fermentation of hemicellulose-derived sugars (HHR) by L. starkeyi resulted in a 27.8% (w/w) lipid content and YP/S of 0.16 g/l.h. Increasing the inoculum size increased the lipid content by approximately 61%, reaching 44.8% (w/w). CONCLUSION: The hemicellulose hydrolysate from SCB is a potential substrate for L. starkeyi to produce lipids for biodiesel synthesis based on the biorefinery concept.

Sulfur Contents in Sulfonated Hyaluronic Acid Direct the Cardiovascular Cells Fate.

Hyaluronic acid (HA) is recognized as a functional carbohydrate polymer applied for the surface modification of cardiovascular implanted materials due to its molecular weight (MW) dependent cellular regulation. However, due to the enzyme digestion of hyaluronidase on HA in vivo, the stability of HA MW needs to be further improved. It has been reported that the stability of HA MW can be improved by sulfonation. In this study, sulfonated hyaluronic acids (S-HA) with sulfur content of 2.06, 3.69, 7.10, 8.98, and 9.71 were prepared through different sulfuric acid treatment procedures. Cell tests showed that S-HA with higher sulfur content played a significant role in promoting the proliferation and migration of endothelial cells and regulating smooth muscle cells to the physiological phenotype. In addition, it was also proved to inhibit the inflammatory macrophages adhesion/activation. Our data indicates that S-HA may be a better carbohydrate polymer for potential application of cardiovascular biomaterials.

Removal of bovine digital dermatitis-associated treponemes from hoof knives after foot-trimming: a disinfection field study.

BACKGROUND: Bovine digital dermatitis (BDD) is an infectious foot disease found commonly in dairy herds. Foot-trimming is an important husbandry procedure for reducing the ensuing lameness; however, epidemiological, and microbiological studies have identified this as a risk activity for transmitting BDD. Three disinfectants have previously been identified in laboratory work as effective for removing viable BDD-associated Treponema spp., from hoof knife blades. The present study enrolled 133 dairy cattle with BDD lesions, and swabbed hoof knife blades before and after foot-trimming, and after knife disinfection with one of three disinfectants (1:100 FAM30®, 2% Virkon® and 2% sodium hypochlorite) to assess their efficacy under field conditions. RESULTS: Detection of BDD treponeme phylogroup DNA was undertaken by direct PCR of swabs, and viable treponemes were detected by PCR of swab cultures after 6 weeks' incubation. Where hoof knives did not contact the lesion, BDD-associated treponemes were detected after foot-trimming in 12/22 (54.5%) cases by direct PCR and 1/22 (4.5%) cases by PCR of cultured organisms. Where contact was made with the lesion, 111/111 (100%) samples taken after trimming were positive by direct PCR and 47/118 (39.8%) were positive by culture PCR. Viable organisms were identified in cultures from lesion stages M2, M3, M4 and M4.1. No viable organisms were detected after disinfection of hoof knives. CONCLUSIONS: Hoof knives post-trimming were frequently contaminated with BDD-associated treponeme DNA. Viable organisms were identified in cultures whether contact had been made between hoof knife and lesion or not, although contact clearly increased the frequency of detection of viable organisms. The three disinfectants tested were effective for removing viable organisms. The disinfection protocol used in this study should therefore be considered reliable for adoption as standard industry practice.

Bioavailability and Bioaccumulation of 6:2 Fluorotelomer Sulfonate, 6:2 Chlorinated Polyfluoroalkyl Ether Sulfonates, and Perfluorophosphinates in a Soil-Plant System.

As emerging alternatives of legacy perfluoroalkyl substances, 6:2 fluorotelomer sulfonate (6:2 FTS), 6:2 chlorinated polyfluoroalkyl ether sulfonates (6:2 Cl-PFESA), and perfluorophosphinates (C6/C6 and C8/C8 PFPiAs) are supposed to be partitioned to soil and highly persistent in the environment. The uptake of novel per- and polyfluoroalkyl substances (PFASs) by plants represents a potential pathway for their transfer in the food chain. In this study, the bioavailability of these four novel PFASs in soil and the bioaccumulation characteristics in greenhouse-grown wheat (Triticum aestivum L.), maize (Zea mays L.), soybean (Glycine max L. Merrill), and pumpkin (Cucurbita maxima L.) were investigated. The results indicated that these novel PFASs with higher hydrophobicity were more easily sequestrated in soil, and the fractions extracted by methanol could well describe their bioavailability, which could be stimulated by low-molecular-weight organic acids at rhizospheric concentrations. A negative relationship was found between root soil concentration factors (RSCFs) and hydrophobicity (log Kow) of the target PFASs. This correlation was also found in the translocation factors (TF) from roots to shoots. Furthermore, the uptake and transfer of the target PFASs were regulated by the protein contents in plant roots and shoots.

Bioremediation of gaseous methyl tert-butyl ether by combination of sulfuric acid modified bagasse activated carbon-bone biochar beads and Acinetobacter indicus screened from petroleum contaminated soil.

Combination of sulfuric acid modified bagasse activated carbon-bone biochar beads and Acinetobacter indicus screened from petroleum contaminated soil was the best condition for gaseous methyl tert-butyl ether (MTBE) removal. It was found that H2SO4 modified bagasse AC in powder form had higher adsorption capacity (989.33 mg g-1) than that in bead form (1.94 mg g-1). In addition, bone biochar in powder form (3.51 mg g-1) also had higher adsorption capacity than that in bead form (1.63 mg g-1). This was the fact that material beads contained high moisture content that inhibited the penetration of gaseous MTBE into the material. And a mixed material of H2SO4 modified bagasse AC-bone biochar beads had the highest adsorption capacity (2.22 mg g-1) compared to individual H2SO4 modified bagasse AC beads (1.94 mg g-1) and bone biochar beads (1.63 mg g-1) due to a mixed material had more rough surface and high surface area on its material. So, gaseous MTBE can penetrate through this material more easily. Although the maximum adsorption capacity of H2SO4 modified bagasse AC in powder form was the highest but microorganism cannot sustain and survive in this form for a long time. Therefore, the material beads were more suitable for microorganism to grow and degrade gaseous MTBE. Microorganism can degrade MTBE and caused no secondary wastes. Moreover, A. indicus was a novel strain for MTBE removal that has not been previously reported. Therefore, a combination of A. indicus-mixed material beads was a good choice for MTBE removal in a biofilter system.

Activated carbon/Brønsted acid-promoted aerobic benzylic oxidation under "on-water" condition: Green and efficient synthesis of 3-benzoylquinoxalinones as potent tubulin inhibitors.

Green chemistry is becoming the favored approach to preparing drug molecules in pharmaceutical industry. Herein, we developed a clean and efficient method to synthesize 3-benzoylquinoxalines via activated carbon promoted aerobic benzylic oxidation under "on-water" condition. Moreover, biological studies with this class of compounds reveal an antiproliferative profile. Further structure modifications are performed and the investigations exhibited that the most active 12a could inhibit the microtubule polymerization by binding to tubulin and thus induce multipolar mitosis, G2/M phase arrest, and apoptosis of cancer cells. In addition, molecular docking studies allow the rationalization of the pharmacodynamic properties observed. Our systematic studies provide not only guidance for applications of O2/AC/H2O system, but also a new scaffold targeting tubulin for antitumor agent discovery.

A Novel Class of N-Sulfonyl and N-Sulfamoyl Noscapine Derivatives that Promote Mitotic Arrest in Cancer Cells.

Noscapine displays weak anticancer efficacy and numerous research efforts have attempted to generate more potent noscapine analogues. These modifications included the replacement of the N-methyl group in the 6'-position with a range of substituents, where N-ethylcarbamoyl substitution was observed to possess enhanced anticancer activity. Herein, we describe advances in this area, namely the synthesis and pharmacological evaluation of a series of N-sulfonyl and N-sulfamoyl noscapine derivatives. A number of these sulfonyl-containing noscapinoids demonstrated improved activities compared to noscapine. ((R)-5-((S)-4,5-Dimethoxy-1,3-dihydroisobenzofuran-1-yl)-4-methoxy-6-((1-methyl-1H-imidazol-4-yl)sulfonyl)-5,6,7,8-tetrahydro[1,3]dioxolo[4,5-g]isoquinoline) (14 q) displayed sub-micromolar activities of 560, 980, 271 and 443 nM against MCF-7, PANC-1, MDA-MB-435 and SK-MEL-5 cells, respectively. This antiproliferative effect was also maintained against drug-resistant NCI/AdrRES cells despite high expression of the multidrug efflux pump, P-glycoprotein.

The EFSA Health Claim on Olive Oil Polyphenols: Acid Hydrolysis Validation and Total Hydroxytyrosol and Tyrosol Determination in Italian Virgin Olive Oils.

The health claims of olive oil represent an important marketing lever in raising the willingness to pay for a product, but world producers of extra virgin olive oil (EVOO) do not take advantage of it because there are still obstacles to their use. Among these, one issue is the lack of an official method for determination of all free and linked forms derived from secoiridoidic structures of hydroxytyrosol and tyrosol. In this study, different acidic hydrolytic procedures for analyzing the linked forms were tested. The best method was validated and then applied to more than 100 EVOOs. The content of oleuropein and ligstroside derivatives in EVOOs was indirectly evaluated comparing the amount of phenols before and after hydrolysis. After acidic hydrolysis, a high content of total tyrosol was found in most of the EVOOs. The use of a suitable corrective factor for the evaluation of hydroxytyrosol allows an accurate determination only using pure tyrosol as a standard. Further knowledge on the concentration of total hydroxytyrosol will assist in forecasting the resistance of oils against aging, its antioxidant potential and to better control its quality over time.

Decomposition of dissolved organic contaminants by combining a boron-doped diamond electrode, zero-valent iron and ultraviolet radiation.

This study presents the results of a research project dealing with the degradation of dissolved tetrachloroethene, MTBE and clopyralid by using a boron-doped diamond electrode, zero-valent iron in a fluidized bed reactor and ultraviolet radiation. These treatment methods were tested alone, in any combination of two as well as in combination of all three of them to identify emerging synergy effects. Additionally, the influence of adding H2O2 or H2O2 + H2SO4 is investigated. The experiments revealed that the treatment methods alone were able to decrease the organic contaminant concentrations, yet, the decomposition rate was not very sufficient. Applying the BDD yielded the highest decomposition rates, however, this degradation was accompanied by metabolite production. By combining two methods and adding H2O2, the decomposition was enhanced significantly for any combination. These removal rates were further increased by using the combination of the three treatment methods and adding H2O2 or H2O2 + H2SO4. These high removal rates were not achieved by solely using the combination of the three methods without further addition of chemicals. This research demonstrates the potential, but also the limitations of the investigated system.

Enhanced organic removal for shale gas fracturing flowback water by electrocoagulation and simultaneous electro-peroxone process.

Colloids and organics in shale gas fracturing flowback water (SGFFW) during shale gas extraction are of primary concerns. Coagulation combined with oxidation might be a promising process for SGFFW treatment. In this study, a novel electrocoagulation-peroxone (ECP) process was developed for SGFFW treatment by simultaneous coagulation and oxidation process with a Al plate as the anode and a carbon-PTFE gas diffusion electrode as the cathode, realizing the simultaneous processes of coagulation, H2O2 generation and activation by O3 at the cathode. Compared with electrocoagulation (EC) and peroxi-electrocoagulation (PEC), COD removal efficiency mainly followed the declining order of ECP, PEC and EC under the optimal current density of 50 mA cm-2. The appearance of medium MW fraction (1919 Da) during ozonation and PEC but disappearance in ECP indicated that these intermediate products couldn't be degraded by ozonation and PEC but could be further oxidized and mineralized by the hydroxyl radical produced by the cathode in ECP, demonstrating the hydroxyl radical might be responsible for the significant enhancement of COD removal. The pseudo-first order kinetic model can well fit ozonation and EC process but not the PEC and ECP process due to the synthetic effect of coagulation and oxidation. However, the proposed mechanism based model can generally fit ECP satisfactorily. The average current efficiency for PEC was 35.4% and 12% higher than that of ozonation and EC, respectively. This study demonstrated the feasibility of establishing a high efficiency and space-saving electrochemical system with integrated anodic coagulation and cathodic electro-peroxone for SGFFW treatment.

Corrosion inhibition of X65 steel in sulfuric acid by two food flavorants 2-isobutylthiazole and 1-(1,3-Thiazol-2-yl) ethanone as the green environmental corrosion inhibitors: Combination of experimental and theoretical researches.

Food flavors of 2-isobutylthiazole (ITT) and 1-(1,3-Thiazol-2-yl)ethanone (TEO) for the corrosion inhibition of X65 steel in H2SO4 were studied by electrochemical methods, atomic force microscopy (AFM), scanning electron microscopy (SEM) and theoretical calculations. Electrochemical experiments show that ITT and TEO can effectively inhibit the corrosion of cathode and anode of X65 steel, and they are mixed-type corrosion inhibitors. Surface topography analysis (SEM and AFM) also visually demonstrate that ITT and TEO form an effective barrier film on the X65 steel surface to isolate the corrosive medium. Theoretical calculations profoundly explain the inhibition mechanism of ITT and TEO at the molecular level. In addition, the adsorption behavior of ITT and TEO on the surface of X65 steel is consistent with Langmuir isotherm adsorption. The results of experimental and theoretical studies have shown that the inhibition effect of TEO is better than ITT for X65 in 0.5 M H2SO4.

Ferrocene-modified iron-based metal-organic frameworks as an enhanced catalyst for activating oxone to degrade pollutants in water.

Ferrocene (Fc) has been regarded as a useful catalyst for activating Oxone to generate sulfate radicals (SR) in degradation of organic pollutants. Nevertheless, direct usage of Fc molecules in aqueous solutions may lead to difficult recovery and aggregation. While a few attempts have immobilized Fc on several substrates, these substrates exhibit very low surface areas/porosities and, especially, do not offer significantly additional contributions to catalytic activities. In this study, a Fe-containing metal organic frameworks (MOFs), MIL-101, is particularly selected for the first time as a support to immobilize Fc chemically. Through the Schiff base reaction, ferrocenecarboxaldehyde can react with amine-functionalized MIL-101 (namely, MIL-101-NH2) to form Fc-modified MIL-101 (Fc-MIL). As Fc-MIL consists of both Fe from MIL-101 and Fc and also exhibits high surface areas, it appears as a promising catalyst for activating Oxone. Catalytic activities for Oxone activation by Fc-MIL are studied using batch-type experiments of amaranth dye degradation. Fc-MIL shows higher catalytic activities than its precursor MIL-101-NH2 owing to the modification of Fc, which equips with MIL-101 with more catalytic sites for activating Oxone. Besides, Fc-MIL also outperforms the benchmark catalyst of Oxone activation, Co3O4, to degrade amaranth. In comparison to the other reported catalysts, Fc-MIL shows the much smaller activation energy for amaranth degradation, proving its advantage over other catalysts. The synthesis technique proposed here can be also employed to develop other Fc-modified MOFs for other environmental catalysis applications.

Aryl fluorosulfate analogues as potent antimicrobial agents: SAR, cytotoxicity and docking studies.

A series of aryl fluorosulfate analogues (1-37) were synthesized and tested for in vitro antibacterial and antifungal studies, and validated by docking studies. The compounds 9, 12, 14, 19, 25, 26, 35, 36 and 37 exhibited superior antibacterial potency against tested bacterial strains, while compounds 2, 4, 5, 15, 35, 36 and 37 were found to have better antifungal activity against tested fungal strains, compared to standard antibiotic gentamicin and ketoconazole respectively. Among all the synthesized 37 analogs, compounds 25, 26, 35, 36 and 37 displayed excellent anti-biofilm property against Staphylococcus aureus. The structure-activity relationship (SAR) revealed that the antimicrobial activity depends upon the presence of -OSO2F group and slender effect of different substituent's on the phenyl rings. The electron donating (OCH3) groups in analogs increase the antibacterial activity, and interestingly the electron withdrawing (Cl, NO2, F and Br) groups increase the antifungal activity (except compound 35, 36 and 37). The mechanism of potent compounds showed membrane damage on bacteria confirmed by SEM. Compounds 35, 36 and 37 exhibited highest glide g-scores in molecular docking studies and validated the biocidal property.

Detection of Histone Modification Dynamics during the Cell Cycle by MS-Based Proteomics.

DNA replication and subsequent deposition of nucleosomes is critical for the maintenance of the genome and epigenetic inheritance. Experiments using human tissue culture cells harvested at defined stages of the cell cycle can help to elucidate the mechanism of histone deposition and chromatin assembly in detail. Here, we describe a pulsed-SILAC approach to distinguish newly synthesized and deposited histones during S-phase of the cell cycle from parental "old" histones incorporated in previous replications and to decipher posttranslational histone modifications (PTMs).

Investigation of corrosion inhibition effect and adsorption activities of Cuscuta reflexa extract for mild steel in 0.5 M H2SO4.

The corrosion inhibition nature of Cuscuta reflexa fruit extract, belonging to the family of Piperaceae, has been analyzed on mild steel in 0.5 M H2SO4 with the help of weight loss studies, potentiodynamic polarization, and electrochemical impedance spectroscopy techniques. The C. reflexa extract contains 3­methoxy­3,4,5,7­tetrahydroxy flavone, which decreases the corrosion rate of mild steel in acidic medium. The maximum corrosion inhibition efficiency was observed at 500 mg/L inhibitor concentration. The adsorption study of C. reflexa extract on mild steel surface has been conducted using UV, FTIR, AFM, SEM, and DFT.

Corrosion inhibition of mild steel in sulfuric acid solution by loquat (Eriobotrya japonica Lindl.) leaves extract.

The inhibition performance and mechanism of loquat leaves extract (LLE) for the corrosion of mild steel in 0.5 M H2SO4 were investigated using weight loss method, electrochemical measurements and scanning electron microscope (SEM). The results revealed that LLE acted as a modest cathodic inhibitor, its inhibition efficiency increased with the concentration of LLE and reached a maximum value of 96% at the 100% V/V concentration, but decreased with incremental temperature. Besides, it was found that the adsorption of LLE on steel surface obeyed Langmuir adsorption isotherm, and then the thermodynamic and kinetic parameters were further determined accordingly. Furthermore, LLE was preliminarily separated by pH-gradient sedimentation and the synergistic inhibition between the isolates was investigated.