Fluid Movement in the Apical Area Beyond the Ledge During Er:YAG Laser-Activated Irrigation: A Particle Image Velocimetry Analysis.

Objective: This study aimed to examine the irrigant flow generated by laser-activated irrigation (LAI), in comparison with ultrasonic-activated irrigation (UAI) and syringe irrigation (SI), in the area beyond the ledge using particle image velocimetry (PIV). Background data: There was no reported study about cleaning efficacy of LAI beyond the ledge. Materials and methods: Forty-nine J-shaped root canal models (40° curvature) were instrumented to no. 35/0.06, and a ledge, 2.5 mm deep, was created with no. 60/0.08 instrument at 5 mm from the apical foramen in each canal. The samples were irrigated with LAI [30 mJ/5 pulse per second (pps), 30 mJ/10 pps, 30 mJ/20 pps, 50 mJ/10 pps, 70 mJ/10 pps], UAI, and SI with a tip/needle insertion depth of 5 mm from the apical foramen (n = 7). PIV was performed with glass beads and a high-speed camera. Velocities were compared in the coronal and apical areas to the ledge, respectively. Results: In the apical area, all LAI groups and UAI produced a higher velocity than that of SI, and LAI at 30 mJ/20 pps and 70 mJ/10 pps showed significantly higher velocity than that of UAI (p < 0.05). In the coronal area, LAI at 30 mJ/20 pps generated a significantly higher velocity than that of UAI and SI (p < 0.05). Velocity was significantly slower in the apical area than in the coronal area in UAI and SI (p < 0.05), but was similar between both areas in LAI except at 30 mJ/20 pps. Conclusions: Among tested laser settings, higher velocity was significantly achieved by LAI at 30 mJ/20 pps and 70 mJ/10 pps compared with UAI in the canal area beyond the ledge. SI generated lower fluid movement than LAI and UAI in both canal regions.

Influence of photobiomodulation therapy on root development of rat molars with open apex and pulp necrosis.

This study aimed to evaluate the role of photobiomodulation (PBM) in apexification and apexogenesis of necrotic rat molars with an open apex. Rat molars were exposed to the oral environment for 3 weeks. Canals were rinsed with 2.5% NaOCl and 17% EDTA, filled with antibiotic paste and sealed. After 7 days, canals were rinsed and divided into six groups (n=6): mineral trioxide aggregate (MTA); blood clot (BC); human dental pulp stem cells (hDPSC); MTA+PBM; BC+PBM; and hDPSC+PBM. In hDPSC groups, a 1% agarose gel scaffold was used. Two groups were not exposed: healthy tooth+PBM (n = 6), healthy tooth (n = 3); and one was exposed throughout the experiment: necrotic tooth (n = 3). In PBM groups, irradiation was performed with aluminum gallium indium phosphide (InGaAlP) diode laser for 30 days within 24-h intervals. After that, the specimens were processed for histological and immunohistochemical analyses. Necrotic tooth showed greater neutrophil infiltrate (p < 0.05). Necrotic tooth, healthy tooth, and healthy tooth+PBM groups showed absence of a thin layer of fibrous condensation in the periapical area. All the other groups stimulated the formation of a thicker layer of fibers (p < 0.05). All groups formed more mineralized tissue than necrotic tooth (p < 0.05). PBM associated with MTA, BC, or hDPSC formed more mineralized tissue (p < 0.05). MTA+PBM induced apexification (p < 0.05). Rabbit polyclonal anti-bone sialoprotein (BSP) antibody confirmed the histological findings of mineralized tissue formation, and hDPSC groups exhibited higher percentage of BSP-positive cells. It can be concluded that PBM improved apexification and favored apexogenesis in necrotic rat molars with an open apex.

Influence of photobiomodulation therapy on root development of rat molars with open apex and pulp necrosis

Abstract This study aimed to evaluate the role of photobiomodulation (PBM) in apexification and apexogenesis of necrotic rat molars with an open apex. Rat molars were exposed to the oral environment for 3 weeks. Canals were rinsed with 2.5% NaOCl and 17% EDTA, filled with antibiotic paste and sealed. After 7 days, canals were rinsed and divided into six groups (n=6): mineral trioxide aggregate (MTA); blood clot (BC); human dental pulp stem cells (hDPSC); MTA+PBM; BC+PBM; and hDPSC+PBM. In hDPSC groups, a 1% agarose gel scaffold was used. Two groups were not exposed: healthy tooth+PBM (n = 6), healthy tooth (n = 3); and one was exposed throughout the experiment: necrotic tooth (n = 3). In PBM groups, irradiation was performed with aluminum gallium indium phosphide (InGaAlP) diode laser for 30 days within 24-h intervals. After that, the specimens were processed for histological and immunohistochemical analyses. Necrotic tooth showed greater neutrophil infiltrate (p < 0.05). Necrotic tooth, healthy tooth, and healthy tooth+PBM groups showed absence of a thin layer of fibrous condensation in the periapical area. All the other groups stimulated the formation of a thicker layer of fibers (p < 0.05). All groups formed more mineralized tissue than necrotic tooth (p < 0.05). PBM associated with MTA, BC, or hDPSC formed more mineralized tissue (p < 0.05). MTA+PBM induced apexification (p < 0.05). Rabbit polyclonal anti-bone sialoprotein (BSP) antibody confirmed the histological findings of mineralized tissue formation, and hDPSC groups exhibited higher percentage of BSP-positive cells. It can be concluded that PBM improved apexification and favored apexogenesis in necrotic rat molars with an open apex.

Light curing resin cements containing iodonium salts promote suitable apical bonding of posts to radicular dentin

Abstract The aim of this study was to analyze the efficiency of experimental light-curing resin cements (ERCs) with a ternary photo-initiator system containing diphenyliodonium hexafluorphosphate (DPI) and different amines on retention of glass-fiber posts to dentin (GFP). ERCs formulations: a 1:1 mass ratio of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenylpropane and triethyleneglycol dimethacrylate. Camphorquinone was used as initiator. Six experimental groups were established according to the amine used: [ethyl-4-(dimethylamino)benzoate-EDMAB or 2-(dimethylamino)ethyl methacrylate-DMAEMA] and the concentration of DPI (0, 0.5 mol%, 1 mol%). The resin cements Variolink II (dual- and light-cured versions) were used as commercial reference. Eighty recently extracted bovine incisors (n = 10) were selected for this study. The roots were prepared and the fiber posts were cemented with the resin cement specified for each experimental group. Specimens from coronal, middle, and apical thirds of the root were subjected to push-out bond strength test 24 hours after bonding. Data were subjected to split-plot ANOVA and the Tukey test (p = 0.05). ERCs containing DPI showed statistically significant higher bond strengths compared with ERCs without DPI. ERCs containing DPI were statistically similar to VARIOLINK II - dual-cured and superior to VARIOLINK II - light-cured (except for EDMAB - 1DPI in the medium third and DMAEMA - 1DPI in the coronal third). Different amines did not influence post retention. The apical root region showed the lowest bond strength for the groups EDAB-0DPI, DMAEMA-0DPI and VARIOLINK II light-cured. Light-cured ERCs containing DPI were efficient for GFP retention to radicular dentin, with similar behaviour to that of dual-curing commercial resin cement.

Effect of Laser Energy and Tip Insertion Depth on the Pressure Generated Outside the Apical Foramen During Er:YAG Laser-Activated Root Canal Irrigation.

OBJECTIVE: The risk of extrusion of irritative irrigants into the extraradicular tissue should be minimized during root canal irrigation. This study aimed to examine the pressure generated outside the apex during Er:YAG laser-activated irrigation (LAI) in comparison with passive ultrasonic irrigation (PUI) and conventional syringe irrigation (SI). BACKGROUND DATA: LAI is reported to be efficient for root canal debridement, whereas the apical pressure generated during LAI has not been investigated in detail. METHODS: Plastic root canal models (apical diameter = 0.40 mm, taper = 6%, and length = 20 mm) were irrigated with water using either LAI with an Er:YAG laser (Erwin AdvEr; 30, 50, or 70 mJ, 10 pps), PUI, or SI. The tip insertion depth was set at 2, 5, or 10 mm from the apex. The pressure generated outside the apical foramen was measured with a pressure sensor connected to the apex of the model. RESULTS: When the tip was positioned at 2 mm and the power setting was changed, the mean maximum pressure values were LAI (30 mJ) = PUI < LAI (70 mJ) < SI (p < 0.05). When LAI was performed at 70 mJ and the tip was positioned at 5 or 10 mm, the pressure values were PUI < LAI = SI (p < 0.05). CONCLUSIONS: LAI generated similar or lower pressure outside the apical foramen compared with SI, irrespective of the laser energy and tip insertion depth examined. However, LAI generated higher pressure compared with PUI.

Lasers in Apicoectomy: A Brief Review.

Since the invention of laser, various applications for lasers in endodontics have been proposed, such as disinfection of the root canal system, canal shaping, pulp diagnosis, and apico-ectomy. One of the major applications of laser in endodontics is apicoectomy. The aim of this article is to review the benefits and drawbacks of laser applications in apicoectomy, including effect on apical seal, effect on dentin permeability, effect on postsurgery pain, effect on crack formation, effect on root-end morphology, effect on treatment outcome, and connective tissue response to laser-treated dentin.

Efficacy of Laser Activated Irrigation on Apically Extruded Debris with Different Preparation Systems.

OBJECTIVE: The aim of this study was to evaluate apical extrusion of debris in canals prepared with three nickel-titanium (NiTi) rotary file systems [Twisted File Adaptive (TFA), SybronEndo, Orange, CA], Reciproc [(RP), VDW, Munich, Germany], and Revo-S [(RS), MicroMega, Besançon, France] and two irrigation [conventional needle (CNI) and laser-activated (LAI)] techniques. BACKGROUND DATA: Although previous studies have evaluated the amount of apically extruded debris by various instrumentation and irrigation methods, none of them have investigated the effect of LAI during the root canal preparation on debris extrusion. METHODS: Ninety extracted single-rooted human mandibular premolars with straight canals were randomly assigned to six groups (n=15) according to the file and irrigation protocols used: (1) TFA and LAI group, (2) RP and LAI group, (3) RS and LAI group, (4) TFA and CNI group, (5) RP and CNI group, and (6) RS and CNI group. Debris extruded from the apical foramen during root canal preparation was collected into preweighed Eppendorf tubes. The weight of the dry extruded debris was established by subtracting the preinstrumentation and postinstrumentation weight of the Eppendorf tubes for each group. Data were analyzed using the Kruskal Wallis and Mann Whitney U tests with Bonferroni correction to compare groups. RESULTS: LAI groups extruded more debris than CNI groups (p<0.05). However, no statistically significant differences were observed among the file groups when each irrigation method was evaluated separately (p>0.017). CONCLUSIONS: Within the limitations of this study, it can be concluded that the agitation method, such as LAI, had a significant effect on the amount of extrusion.

Effect of low-level laser therapy on dental root cementum remodeling in rats.

OBJECTIVE: To investigate the amount of the cementum layer formed over the rat's dental root surfaces by daily application of low-level laser therapy (LLLT) for 2 weeks. METHODS: Twelve female Sprague-Dawley (SD) rats were divided into two groups: six rats received daily LLLT (Ga-Al-As, 830 nm), and six rats received no treatment (control). The treatment lasted 2 weeks. In vivo Micro-CT imaging analyzed the root's hard tissue volumetric changes. The cementum thickness was evaluated histologically. RESULTS: Total cementum thicknesses in the LLLT group increased significantly (p = 0.015) compared to the control group. This significant increase in the cementum thickness, verified histologically, was not detectable during in vivo Micro-CT imaging, which showed no significant difference between the groups regarding the root hard tissues volumetric changes over the 2-week evaluation period. CONCLUSION: Two weeks of daily application of LLLT significantly increased rat's dental root cementum thickness as determined histologically. However, in vivo Micro-CT imaging failed to accurately reveal this cementum growth as it was not possible to differentiate dentinal changes.

Nd:YAG laser irradiation effect on apical intracanal dentin - a microleakage and SEM evaluation

The purpose of this in vitro study was to evaluate the effect of neodymium:yttrium-aluminum-garnet (Nd:YAG) laser irradiation on intracanal dentin surface by SEM analysis and its interference in the apical seal of filled canals. After endodontic treatment procedures, 34 maxillary human incisors were randomly assigned to 2 groups. In the negative control group (n=17), no additional treatment was performed and teeth were filled with vertically condensed gutta-percha; in the laser-treated group (n=17), the root canals were irradiated with Nd:YAG laser (1.5 W, 100 mJ, 15 Hz) before filling as described for the control group. Two specimens of each group were prepared for SEM analysis to evaluate the presence and extent of morphological changes and removal of debris; the other specimens were immersed in 0.5 percent methylene blue dye (pH 7.2) for 24 h for evaluation of the linear dye leakage at the apical third. SEM analysis of the laser-treated group showed dentin fusion and resolidification without smear layer or debris. The Student’s t-test showed that the laser-treated group had significantly less leakage in apical third than the control group. Within the limitations of this study, it may be concluded that the morphological changes on the apical intraradicular dentin surface caused by Nd:YAG laser resulted in less linear dye apical leakage.

Apical microleakage and SEM analysis of dentin surface after 980 nm diode laser irradiation

This study evaluated the effect of 980-nm diode laser on apical microleakage and intraradicular dentin morphology. Roots of 110 mandibular incisors were used in the study: 92 for microleakage test and 18 for scanning electron microscopy (SEM). Roots were randomly assigned to 3 groups according to the irrigating solution (water, NaOCl and NaOCl/EDTA) and were divided into 3 subgroups according to the laser irradiation protocol (without irradiation, irradiated at 1.5 W and irradiated at 3.0 W). Two specimens of each subgroup were prepared for SEM. The remaining roots were filled with AH Plus and gutta-percha. Apical leakage was assessed by ink penetration and data were analyzed statistically by ANOVA and Tukey-Krammer test (α=0.05). SEM analysis showed intensification of changes with increase of laser power as well as variations according to the irrigating solution. Modified smear layer was observed in specimens treated with water and irradiated with laser. Roots irrigated with NaOCl/EDTA had lower levels of infiltration (0.17 ± 0.18 mm) differing significantly (p<0.05) from those of roots irrigated with water (0.34 ± 0.30 mm), but similar (p>0.05) to those irrigated with NaOCl (0.28 ± 0.29 mm). Non-irradiated roots had lower levels of infiltration (0.10 ± 0.14 mm), differing (p<0.05) from those irradiated at 1.5 W (0.32 ± 0.22 mm) and 3.0 W (0.37 ± 0.32 mm). The 980 nm diode laser modified dentin morphology and increased apical microleakage.

Este estudo avaliou o efeito do laser de diodo 980 nm na microinfiltração apical e na morfologia intrarradicular da dentina. Raízes de 110 incisivos inferiores foram utilizadas no estudo: 92 para o teste de microinfiltração e 18 para microscopia eletrônica de varredura (MEV). As raízes foram divididas em 3 grupos de acordo com a solução irrigante (água, NaOCl e NaOCl/EDTA) e subdivididas em 3 de acordo com a irradiação laser (sem irradiação, irradiados com 1,5 W e irradiados com 3,0 W). Duas amostras de cada subgrupo foram preparadas para MEV. As raízes restantes foram preenchidas com AH Plus e guta percha. A infiltração apical foi avaliada nas raízes por meio da penetração do corante e os dados foram analisados por ANOVA e teste de Tukey-Krammer (α=0,05). Os resultados da MEV mostraram intensificação das mudanças quando se aumentou a potência do laser e variações de acordo com a solução irrigadora. Camada de smear modificada foi observada em espécimes tratados com água e irradiados com laser. Raízes irrigadas com NaOCl/EDTA tiveram níveis menores de infiltração (0,17 ± 0,18 mm) estatisticamente diferente (p<0,05) das raízes irrigadas com água (0,34 ± 0,30 mm), mas semelhante (p>0,05) aos irrigados com NaOCl (0,28 ± 0,29 mm). As raízes não irradiadas tiveram níveis menores de infiltração (0,10 ± 0,14 mm), diferente (p<0,05) de 1,5 W (0,32 ± 0,22 mm) e 3.0 W (0,37 ± 0,32 mm). O laser de diodo 980 nm alterou a morfologia da dentina e aumentou a infiltração marginal apical.

Morphological assessment of dentine and cementum following apicectomy with Zekrya burs and Er:YAG laser associated with direct and indirect Nd:YAG laser irradiation.

OBJECTIVES: This study aimed to assess the apical surface morphology of maxillary central incisors resected 3.0 mm from the tooth apex using Zekrya burs or Er:YAG laser, with or without subsequent direct Nd:YAG laser irradiation (apical and buccal surfaces) and indirect irradiation (palatal surface). STUDY DESIGN: Forty maxillary central incisors were instrumented and obturated. The roots were divided into 4 groups according to the root resection method (Zekrya bur or Er:YAG laser - 1.8 W, 450 mJ, 4 Hz, 113 J/cm(2)) and further surface treatment (none or Nd:YAG laser - 2.0 W, 100 mJ, 20 Hz, 124 J/cm(2)). The teeth were prepared for SEM analysis. Scores ranging from 1 to 4 were attributed to cut quality and morphological changes. The data were analyzed by the Kruskal-Wallis test and by Dunn's test. RESULTS: SEM images showed irregular surfaces on the apical portions resected with Zekrya burs, with smear layer and grooves in the resected dentine and slight gutta-percha displacement and plasticization. On the other hand, apicectomies carried out with Er:YAG laser showed morphological changes compatible with ablated dentine, with rough surfaces and craters. In spite of the presence of plasticized gutta-percha, with the presence of bubbles, an irregular adaptation of the filling material to the root walls was also observed. Direct Nd:YAG laser irradiation of the apical and buccal surfaces of the resected roots resulted in areas of resolidification and fusion in the dentine and cementum, with a vitrified aspect; indirect Nd:YAG laser irradiation of the palatal surfaces yielded a lower number of changes in the cementum, with irregular resolidification areas. CONCLUSIONS: There were no differences in terms of cut quality between the use of burs and Er:YAG laser or between the 2 surfaces (apical and buccal) treated with Nd:YAG laser with direct irradiation. However, morphological changes were significantly less frequent on surfaces submitted to indirect irradiation (palatal) when compared with those directly irradiated.

Apical leakage of three resin-based endodontic sealers after 810-nm-diode laser irradiation.

OBJECTIVE: To evaluate the influence of 810-nm-diode laser irradiation, applied before root canal filling, on apical sealing ability of three different resin-based sealers (AH Plus, EndoRez, and RealSeal). BACKGROUND: Lasers have been widely used in endodontics. The dentin wall changes caused by laser irradiation could improve the sealing ability of endodontic cements. METHODS: Sixty single-rooted human teeth were divided into six groups, according to the endodontic sealer used and previous 810-nm-diode laser irradiation. The protocol for laser irradiation was 2.5 W in a continuous wave, in scanning mode, with four irradiations per tooth. After sample preparation, they were analyzed according to apical leakage with silver nitrate impregnation. RESULTS: The RealSeal sealer achieved minimum leakage rates (1.24 mm), with significant differences at the 1% level (Tukey's test, p<0.01) from AH Plus (1.84 mm) in nonirradiated groups. When the laser was used, there were also significant differences at the 5% level (p<0.05) between irradiated groups (1.31 and 1.78 mm, respectively). CONCLUSION: The 810-nm-diode laser irradiation did not promote significant differences in apical leakage.

Influence of Nd:YAG and diode laser irradiation on apical sealing when associated with AH plus and EndoREZ endodontic cements.

OBJECTIVE: This study aims to evaluate the influence of Nd:YAG and diode laser irradiation on apical sealing when applied before root canal filling done with two different resin-based cements (AH Plus and EndoREZ). BACKGROUND DATA: Lasers have been widely used in endodontics. The morphologic changes in dentin walls caused by Nd:YAG and diode laser irradiation could improve sealing ability of endodontic cements. METHODS: Eighty canine teeth were analyzed by apical leakage of methylene blue dye and by scanning electron microscope (SEM) images of the filling's adaptation to the apical third dentin walls. The laser irradiation parameters for the Nd:YAG laser were 100 mJ, 15 Hz, and 1.5 W, and for the diode laser was 2.5 W (continuous mode). RESULTS: The apical leakage results showed statistically significant differences at the 5% level of significance (Tukey's test, p < 0.05) among the different root canal wall treatments, independently of the root canal filling cement used. The cements also showed significant differences between them on the lased groups. The SEM analysis revealed better filling adaptation for AH Plus and the Nd:YAG laser group, confirming the microleakage results. CONCLUSION: We concluded that the combination of the Nd:YAG laser and AH Plus showed the best results.

Effects of 2.94 microm Er:YAG laser radiation on root surfaces treated in situ: a histological study.

BACKGROUND: Previous scanning electron microscopy (SEM) studies using extracted teeth have shown the potential of infrared Er:YAG laser radiation to remove subgingival calculus without causing severe thermal changes, e.g., charring or fusion, to the irradiated root surface. The purpose of the present study was to examine the morphologic changes on root surfaces following Er:YAG laser irradiation in situ using histological observation. METHODS: The periodontal pockets of 6 premolars, canines, and incisors that remained in situ in the jaws of human corpses were irradiated with Er:YAG laser radiation at 60 mJ, 100 mJ, or 180 mJ. The pockets were treated in a similar manner to normal clinical circumstances with a total amount of either 50 or 100 laser pulses. Following laser treatment, the entire tooth, marginal gingiva, and underlying alveolar bone were removed from the jaw. The sections were embedded in methyl-methacrylate, serially cross-sectioned, stained with hematoxylin and eosin or gallamine blue, and examined under a light microscope. Additionally, the extension of the thermally changed tissue areas was determined using digital images and histometry. RESULTS: The histological examination revealed two kinds of thermal changes within the laser-treated root surface. Firstly, a thin superficial layer 5 to 10 microm in width was observed. The surface of this layer showed ultrastructural irregularities. Secondly, a semicircular more deeply stained area close to the apical end of the scaling track beneath the irradiated cementum was observed. The depth of this area ranged from 255 microm to 611 microm and appeared to be independent of the radiation energy. CONCLUSION: In contrast to previous SEM studies, the histological examination indicated thermal changes within the hard tissue bordering the periodontal pocket following Er:YAG laser irradiation.

Effects of cancer therapy on dental and maxillofacial development in children: report of case.

Malignant lymphoma is one of the most common hematological diseases of children. The prognosis is fairly good with multimodal cancer therapy. We reported a boy with Burkitt's lymphoma in the nasal cavity who received chemotherapy and irradiation of the head and neck area at four years of age. During seven years of follow-up, we studied the developmental effects of cancer therapy, including general growth, maxillofacial bones, and dentition. Compared with boys of matching age, the development of his entire body and maxillofacial bones was delayed. In the irradiated areas, the roots of teeth were short or poorly developed and the root apices showed premature closure. After the patient was in remission from the tumor in his early childhood, the long-term effects of cancer therapy on dental and maxillofacial development are worth our further evaluation and follow-up.

A comparative study on the effects of three types of laser irradiation at the apical stop and apical leakage after obturation.

OBJECTIVE: The purposes of this study were to determine the degree of apical leakage using a dye penetration method after argon, pulsed Nd:YAG with or without black ink, or Er:YAG laser treatment and obturation, and to compare the results of three types of laser irradiation in vitro. SUMMARY BACKGROUND DATA: There have been only a few reports of the laser effect on apical leakage after laser treatment and obturation. METHODS: Seventy-five human extracted single root teeth were divided into five groups of 15 teeth each and prepared up to a #60 K-file size. One group served as the control and was not irradiated. The other four groups were irradiated with an argon laser at 0.3 W for 3 seconds at continuous mode, pulsed Nd:YAG laser at 2 W and 20 Hz for 4 seconds with or without black ink, and Er:YAG laser at 50 mJ per pulse and 4 Hz for 5 seconds. In each group, ten teeth for the apical leakage study were obturated and immersed in rhodamine B solution for 48 hours at 37 degrees C, and the others were used for the observation by scanning electron microscopy (SEM). All teeth were longitudinally bisected and observed by stereoscopy or SEM. RESULTS: After pulsed Nd:YAG laser treatment with black ink and obturation, the apical leakage degree (mean score: 0) was reduced compared to that in the control (mean score: 1.2) significantly (p < 0.05). SEM findings showed that specimens irradiated by pulsed Nd:YAG laser with black ink presented clean root canal walls with debris and smear layer evaporated, melted, fused, and recrystallized in most cases. CONCLUSION: These results suggest that pulsed Nd:YAG laser irradiation with black ink at the apical stop is useful for the reduction of apical leakage after obturation.

A histopathological study of the morphological changes at the apical seat and in the periapical region after irradiation with a pulsed Nd:YAG laser.

In this study, the effects of pulsed Nd:YAG laser irradiation on the apical seat and periapical region of instrumented root canals were investigated. One hundred and ninety-two teeth, including incisors and molars (239 root canals), in 18 healthy adult beagle dogs were used. After extirpation of the pulp under anaesthesia, each root canal was shaped up to at least a size 40 K-file, and then laser irradiated using the following parameters: 1 W, 15 pps for 2, 3, and 4 s; 2 W, 15 pps for 2 s. The effectiveness of debris removal and carbonization on the root canal walls immediately laser irradiation were examined and inflammation of the periapical region at 1, 2, and 4 weeks after laser irradiation was examined using light microscopy. Effective debris removal was observed in most cases in the laser-treated groups and was dependent on irradiated energy. Carbonization was observed in the irradiated root canals except at the parameter of 1 W for 2 s. Periapical inflammation was observed at 1 W for 2 s to the same extent as in the control group (P > 0.01). These results suggest that the pulsed Nd:YAG laser is useful for debris removal with no adverse effects immediately after extirpation of the pulp if appropriate parameters are selected.

The carbon dioxide laser as an aid in apicoectomy: an in vitro study.

OBJECTIVE: To achieve the required goal of optimally sealing the apical section and the root-canal when performing an apicoectomy, the authors decided to use the CO2 laser as an additional aid. SUMMARY BACKGROUND DATA: The CO2 laser has previously shown to have an excellent sealing effect on dentin surfaces. METHODS: In this in vitro study, the authors examined the effects of CO2 laser application in apicoectomies with the help of color penetration tests and scanning electron microscopic (SEM) examinations. Sections and root canals were irradiated with low power (0.5 W) in continuous wave mode for totally 20 sec. The thermal stress for the adjacent tissues attaching thereto is moderate as shown by infrared-spectroscopy. RESULTS: A comparison with nonirradiated samples revealed that CO2 laser irradiation reduced color penetration at the section to a minimum. Also, irradiation of the root-canal wall resulted in satisfactory sealing of the surface. These findings were supported by the results of the SEM examinations. CONCLUSIONS: CO2 laser treatment optimally prepares the tooth for final intraoperative filling because of sealing of the dentinal tubules, the resultant elimination of niches for bacteria and the sterilizing effect of the laser.

Effects of irradiation of an erbium:YAG laser on root surfaces.

The application of erbium:YAG laser (Er:YAG) irradiation has been investigated for periodontal therapy. The purpose of this study was to evaluate the effects of Er:YAG laser irradiation on root surfaces using a scanning electron microscope (SEM) and to determine the laser's ability to remove lipopolysaccharides (LPS). Infrared spectrophotometry was used to investigate the effects of the laser on LPS applied to root dentin pellets. Premolars extracted for orthodontic reasons were prepared for this study. The crowns were resected below the cemento-enamel junction, longitudinally sectioned, and the contents of the pulp chamber were removed. Then 15 root tips (5 x 5 x 1 mm) were classified into 3 groups of 5 each as follows: group 1, tips without any treatment; group 2, planed tips with the cement layers left untouched; and group 3, planed until the dentin surface was disclosed. The center of each specimen was used as the experimental irradiated area and the peripheral area served as a control. The quantity of vapor delivered by Er:YAG laser was highly increased, and the irradiated areas displayed little morphogenetic changes. The lyophilized sample LPS 0111 B4 from E. coli was then mixed with potassium bromide and pressed into a tablet, which was examined at 4,000-650 Kayser. The lyophilized LPS had a peak at 2.94 microns. LPS on the root dentin pellets was cleared away as much as possible by 150 washings in pyrogen-free water using an ultrasonic cleaner. Five microliters of 24 EU LPS solution was dropped on the root dentin pellets, which were then irradiated by the Er:YAG laser, and washed using the ultrasonic cleaner in pyrogen-free water. The amount of the extracted LPS solution was determined by spectrophotometer at 405 nm. The Er:YAG laser could remove 83.1% of the LPS. This study suggests that Er:YAG laser irradiation might be useful for root conditioning in periodontal therapy. However, clinical testing is necessary to establish what, if any, utility the Er:YAG laser has as a part of periodontal therapy.