Characterization of Corn Oil Using Fluorescence Spectroscopy.

In these studies, Fluorescence spectroscopy has been utilized for the characterization of pure and commercially available corn oil. The best excitation wavelength of 380 nm has been investigated, where maximum spectral information can be assessed. The emission spectra from pure and commercial corn oil samples disclosed that pure corn oil contained oleic acid, beta-carotenes, chlorophylls, isomers of vitamin E and traces of oxidized products which exhibit fluorescence at 406, 525, 675, 440 and 435/475 nm respectively. Whereas, commercial corn oils lack these valuable ingredients and only contain fats along with their primary and secondary oxidized products that emit a broad emission band centred at 440 nm. The study has also depicted that Fluorescence spectroscopy can even be used to select best quality corn oil among pure corn oil samples with different varieties and seed origins. In addition, the effect of temperature on the composition of pure and commercial corn oil samples have also been investigated by heating them at 100, 120,140, 160, 180 and 200 °C each sample for 30 min. This was done because corn oil is being used for cooking where it is generally heated up to 120 °C and for deep frying up to 180 °C. On heating, in pure corn oil, deterioration of Vitamin-E and beta-carotenes occurred with an increase in the oxidation products, whereas, in commercial oil samples, only the concentration of oxidation products increased. However, it was found that up to 140 °C, pure corn oil can be used safely for cooking purpose where it does not lose much of its valuable ingredients while in commercial corn oils, fat composition does not alter much up to 180 °C and after that oxidized products start to increase rapidly.

Effects of Surfactant Volume Fraction on the Antioxidant Efficiency and on The Interfacial Concentrations of Octyl and Tetradecyl p-Coumarates in Corn Oil-in-Water Emulsions.

Surfactants have been used for decades in the food industry for the preparation of lipid-based emulsified food stuffs. They play two main roles in the emulsification processes: first they decrease the interfacial tension between the oil and water, facilitating droplet deformation and rupture; second, they reduce droplet coalescence by forming steric barriers. However, addition of surfactants to binary oil-water mixtures also brings up the formation of three-dimensional interfacial layers, surrounding each emulsion droplet, that significantly alter chemical reactivity. This is the case, for instance, in the inhibition reaction between antioxidants and the lipid radicals formed in the course of the spontaneous oxidation reaction of unsaturated lipids, which are commonly employed in the preparation of food-grade emulsions. The rate of the inhibition reaction depends on the effective concentrations of antioxidants, which are mostly controlled by the amount of surfactant employed in the preparation of the emulsion. In this work, we analyze the effects of the surfactant Tween 20 on the oxidative stability and on the effective concentrations of two model antioxidants derived from cinnamic acid, determining their interfacial concentrations in the intact emulsions to avoid disrupting the existing equilibria and biasing results. For this purpose, a recently developed methodology was employed, and experimental results were interpreted on the grounds of a pseudophase kinetic model.

Maximizing the Oral Bioavailability of Poorly Water-Soluble Drugs Using Novel Oil-Like Materials in Lipid-Based Formulations.

Lipid-based formulations, such as self-microemulsifying drug-delivery systems (SMEDDSs), are promising tools for the oral delivery of poorly water-soluble drugs. However, failure to maintain adequate aqueous solubility after coming into contact with gastrointestinal fluids is a major drawback. In this study, we examined the use of a novel cinnamic acid-derived oil-like material (CAOM) that binds drugs with a high affinity through π-π stacking and hydrophobic interactions, as an oil core in a SMEDDS for the oral delivery of fenofibrate in rats. The use of the CAOM in the SMEDDS resulted in an unprecedented enhancement in fenofibrate bioavailability, which exceeded the bioavailability values obtained using SMEDDSs based on corn oil, a conventional triglyceride oil, or Labrasol, an enhancer of intestinal permeation. Further characterization revealed that the CAOM SMEDDS does not alter the intestinal permeability and has no inhibitory activity on P-glycoprotein-mediated drug efflux. The results reported herein demonstrate the strong potential of CAOM formulations as new solubilizers for the efficient and safe oral delivery of drugs that have limited water solubility.

Production of Margarines Rich in Unsaturated Fatty Acids Using Oxidative-stable Vitamin C-Loaded Oleogel.

Vitamin C (VC)-loaded oleogel (VCOG) with corn oil and monoglyceride stearate was used to replace lipid phase of margarine completely. The oxidative stability of VCOG was evaluated at 60±1°C in a lightproof oven for 18 days and the result showed that VCOG peroxide (> 6 days) and p-anisidine value (> 4 days) was significantly lower than that of bulk oil and VC-free oleogel (p < 0.05). Then, the margarine containing 79.70% VCOG (VCOGM) was in comparison with four commercial butter in sensory and physical characteristic. Results showed that firmness, solid fat content and trans fatty acid of VCOGM were in the lowest values while unsaturated fatty acid and adhesiveness of VCOGM was in the highest values. Furthermore, VCOGM presented the similar springiness, cohesiveness, gumminess, score appearance, texture, taste and overall impression to some/all commercial butters selected in this research (p > 0.05). These results implied that VC-loaded oleogel was an excellent alternative of lipid phase in margarine which confirmed by 55% "definitely buy" and 25% "try once-then decide".

Development and certification of a reference material for zearalenone in maize germ oil.

Zearalenone (ZEN), an estrogenic mycotoxin produced by several species of Fusarium fungi, is a common contaminant of cereal-based food worldwide. Due to frequent occurrences associated with high levels of ZEN, maize oil is a particular source of exposure. Although a European maximum level for ZEN in maize oil exists according to Commission Regulation (EC) No. 1126/2007 along with a newly developed international standard method for analysis, certified reference materials (CRM) are still not available. To overcome this lack, the first CRM for the determination of ZEN in contaminated maize germ oil (ERM®-BC715) was developed in the frame of a European Reference Materials (ERM®) project according to the requirements of ISO Guide 35. The whole process of CRM development including preparation, homogeneity and stability studies, and value assignment is presented. The assignment of the certified mass fraction was based upon an in-house study using high-performance liquid chromatography isotope dilution tandem mass spectrometry. Simultaneously, to support the in-house certification study, an interlaboratory comparison study was conducted with 13 expert laboratories using different analytical methods. The certified mass fraction and expanded uncertainty (k = 2) of ERM®-BC715 (362 ± 22) µg kg-1 ZEN are traceable to the SI. This reference material is intended for analytical quality control and contributes to the improvement of consumer protection and food safety.

Fabrication and characterization of the W/O/W multiple emulsion through oleogelation of oil.

W/O/W emulsions were easily prepared by oleogelation of the oil phase using rice bran wax (RBX) and their microstructure, stability, rheology and protection of proanthocyanidins and ß-carotene were investigated. Formation of the W/O/W emulsion was confirmed using confocal laser scanning microscopy and staining of the inner aqueous phase by tartrazine. The average particle size and viscosity of the emulsion increased as the RBX concentration increased. Moreover, RBX increased the stability of the emulsion and the emulsion was the most stable when the RBX concentration was 8.0% or 10.0%. On the other hand, the W/O/W emulsions were used to simultaneously encapsulate proanthocyanidins and ß-carotene. Specifically, proanthocyanidins and ß-carotene in RBX-containing emulsions were more stable and had higher bioaccessibility than in the emulsion without RBX. Besides, both their chemical stability and bioaccessibility reached the maximum value when the RBX concentration was 8.0% or 10.0%. In summary, the optimal RBX concentration was 8.0%.

Effects of Low-melting-point Fractions of Cocoa Butter on Rice Bran Wax-corn Oil Mixtures: Thermal, Crystallization and Rheological Properties.

The fatty acid compositions, polymorphism, solid fat content (SFC), thermal properties, microstructure and rheological properties of fat blends of rice bran wax and corn oil (RWC) with low-melting-point fractions of cocoa butter (LFCB) in the range of 20-50% were investigated. With the raising content of LFCB, the hardness, SFC, storage modulus (G') and loss modulus (G'') of blend samples increased. The unsaturated fatty acids of blend samples with different LFCB proportion were in the range of 60.42% to 71.25%. Two kinds of polymorphism were observed in blend samples, which were ß'-Form and ß-Form. During the crystallization process, the rice bran wax was first crystallized, and then induced a part of LFCB formed ß'-Form crystals and another LFCB formed the ß-Form crystals. The results show that the addition of LFCB could improve the plasticity of fat blends and reduce the difference in properties between them and commercial shortening.

Water-in-Oil-in-Water Nanoemulsions Containing Temulawak (Curcuma xanthorriza Roxb) and Red Dragon Fruit (Hylocereus polyrhizus) Extracts.

Hydrophobic curcumin in temulawak extract and hydrophilic betacyanin in red dragon fruit extract are high-value bioactive compounds with extensive applications in functional food. In this study, these extracts were encapsulated in water-in-oil-in-water (w/o/w) nanoemulsions as a delivery system using a two-step high-energy emulsification method. PGPR and Span 20 were used as lipophilic emulsifiers for the primary w/o emulsion. The most stable w/o/w formulation with the least oil phase separation of 5% v/v consisted of w/o emulsion (15% w/w) and Tween 80 (1.5% w/w) as hydrophilic emulsifier. The formulation was characterized by a 189-nm mean droplet diameter, 0.16 polydispersity index, and -32 mV zeta potential. The freeze-thaw stability may be attributed to the combination of low w/o emulsion content and high Tween 80 concentration in the outer water phase of the w/o/w nanoemulsions used in this study. The IC50 values of the nanoemulsion and the red dragon fruit extract were similar. It means that the higher concentration of curcumin in the nanoemulsions and the lower IC50 value of temulawak extract ensured sufficient antioxidant activities of the w/o/w nanoemulsions.

Bioaccessibility of carotenoids and antioxidant capacity of seed-used pumpkin byproducts powders as affected by particle size and corn oil during in vitro digestion process.

Powders made from seed-used pumpkin flesh (SUPF) are potential sources of carotenoids. In this study, unexplored effects of particle size and corn oil on bioaccessible amounts of carotenoids and antioxidant capacity of SUPF powders during in vitro digestion process were investigated. Overall, total carotenoid relative bioaccessibility (TCRB) of 100 mesh-sized powder (100 MP, 15.46%) was higher than that of 18 mesh-sized powder (18 MP, 12.94%). With the addition of 2% corn oil, TCRB increased 108.35% (18 MP) and 88.55% (100 MP), respectively. Lutein (≥27160 µg/100 g) and ß-carotene (≥5192 µg/100 g) were main carotenoid monomers in SUPF and significantly correlated with DPPH radical scavenging activity of digestive supernatant (p < 0.05). Notably, DPPH radical scavenging activity of 18 MP increased 96.54% with corn oil. These results implied that smaller particle size and oil addition could improve bioaccessible amounts of carotenoids and antioxidant capacity of SUPF powders.

Emulsifying properties of a ferulic acid-grafted curdlan conjugate and its contribution to the chemical stability of ß-carotene.

A biopolymer-polyphenol conjugate-stabilized oil-in-water emulsion system was established to improve the chemical stability and bioaccessibility of ß-carotene (BC). In this study, the emulsifying properties and contribution of a ferulic acid-grafted curdlan conjugate (Cur-D-g-FA) to the chemical stability of BC were investigated. Results showed that the emulsification ability of emulsions stabilized by Cur-D-g-FA remarkably increased with an increasing concentration from 0.05% to 0.8% (w/v) along with decreasing average droplet sizes, negatively charged zeta potentials, and uniform size distributions. The emulsions stabilized by 0.8% Cur-D-g-FA exhibited pronounced shear thinning and solid-like elastic properties as well as satisfactory oxidation stability. The emulsions stabilized by 0.8% Cur-D-g-FA had excellent ability to improve the chemical stability of BC when exposed to different environmental stresses and resulted in the favorable bioaccessibility of BC in vitro. The results prove that Cur-D-g-FA as a promising stabilizer has great potential to protect liposoluble nutrients in food-grade emulsion-delivery systems.

Effect of unsaturation of free fatty acids and phytosterols on the formation of esterified phytosterols during deodorization of corn oil.

BACKGROUND: Phytosterols are partly removed during oil refining, and the magnitude of phytosterols loss largely depends on the refining conditions applied and the molecular conformation. The aim of this research was to study the effect of deodorization conditions and molecular unsaturation on the esterification of phytosterols during deodorization of corn oil. RESULTS: In the chemical model, free fatty acids (FFAs) were the major provider of acyl groups during the formation of phytosteryl fatty acid esters (PEs) under deodorization conditions. Among the main parameters of the deodorization, temperature played a role in the formation of PEs with a time-dependent manner. In comparison, saturated palmitic acid had a higher capability of esterifying free phytosterols (FPs) to PEs than unsaturated oleic acid and linoleic acid. Moreover, the influence of FFA unsaturation on the degradation of FPs depended on temperature. Besides, the formation of stigmasteryl ester had a competitive advantage over that of sitosteryl ester by quantum chemistry simulation. CONCLUSION: For laboratory-scale deodorization of corn oil, saturated fatty acids and deodorization process with steam as stripping gas could obviously esterify FPs to PEs. FPs were abundantly enriched in distillate during the deodorization process with nitrogen as stripping gas, whereas FPs and PEs were distilled simultaneously during the deodorization process with steam. © 2020 Society of Chemical Industry.

Reduction of aflatoxin B1 by magnetic graphene oxide/TiO2 nanocomposite and its effect on quality of corn oil.

Magnetic graphene oxide/TiO2(MGO/TiO2) nanocomposite was synthesized for the reduction of aflatoxin B1 (AFB1) in corn oil. The photodegradation of synthesized nanocomposites on AFB1 in corn oil under different treatment conditions and its effect on the quality of corn oil were investigated. The doping of magnetic GO effectively enhanced the photocatalytic activity of TiO2 both under UV light and visible light. The reduction of AFB1 in corn oil reached 96.4% after illumination for 120 min under UV-Vis light. Holes (h+) and the hydroxyl radicals (OH) were found to play important roles in the reduction of AFB1, and three transformation products were confirmed by electrospray ionization mass spectrometry (ESI/MS) analysis. In addition, the quality of the treated corn oil was still acceptable after storage for 180 days. This study provides an effective, environmental-friendly and practical approach for reduction of AFB1 in oil products.

Towards a Valorization of Corn Bioethanol Side Streams: Chemical Characterization of Post Fermentation Corn Oil and Thin Stillage.

First-generation biofuel biorefineries may be a starting point for the development of new value chains, as their by-products and side streams retain nutrients and valuable molecules that may be recovered and valorized for high-value applications. This study provides a chemical characterization of post-fermentation corn oil and thin stillage, side streams of dry-grind corn bioethanol production, in view of their valorization. An overall long-term study was conducted on the two co-products collected over 1 year from a bioethanol plant. Water content, acid value, sedimentation, mineral composition, and fatty acid profiles were analyzed on post-fermentation corn oil. Results highlighted that its acid value was high (19.72-24.29 mg KOH/g), indicating high levels of free fatty acids, but stable over the year due to standardized operating conditions. The fatty acid profile was that typical of corn oil, with a prevalence of linoleic (54-59% of total fatty acids) over oleic (23-27%) and palmitic (12-17%) acids. Macronutrients, fatty acid, and mineral profiles were investigated in thin stillage. Results revealed the acidic pH (4.05-4.68) and high dilution (90-93% water) of this side stream. The dry mass was composed of fats (19-30%), proteins (8.8-12.8%), ash (8.7-9.5%), and fiber (7.3-9.8%). The concomitant presence of a variegate complex of molecules of nutritional interest in corn bioethanol co-products, with several potential high-value market applications, make the perspective of their recovery a promising strategy to create new cross-sector interconnections according to circular economy principles.

Using Raman spectroscopy and an exponential equation approach to detect adulteration of olive oil with rapeseed and corn oil.

This study presents a method to determine adulteration of olive oil (obtained from Olea europea, i.e. olives) with rapeseed oil (obtained from Brassica napus) or with corn oil (also named maize oil, obtained from Zea mays, i.e. maize) using Raman spectroscopy and a mathematical method based on exponential equation fit. The samples were prepared by mixing olive oil with volume fractions (0-100%) of rapeseed or corn oil. The oils were differentiated spectroscopically using intensity ratio for specific Raman peaks; Raman spectroscopy is able to detect changes within a liquid molecular environment without the need for sample treatment. It was possible to determine rapeseed or corn oil volume fractions added into the olive oil using the method proposed. Thus, the potential of Raman spectroscopy as a technique for determining adulteration of olive oil was corroborated clearly, opening the potential to investigate adulteration of other liquid foods, without any need for sample preparation.

Soy glycinin-soyasaponin mixtures at oil-water interface: Interfacial behavior and O/W emulsion stability.

Soy glycinin (11S) was mixed with soyasaponin (Ssa) to elucidate the mechanism(s) involved in the stabilization of emulsions by mixed systems based on dynamic interfacial tension and dilatational rheology at the oil-water interface. The short/long-term properties of oil-in-water emulsions stabilized by 11S-Ssa mixtures included droplet-size distribution, droplet ζ-potential, microstructure, and Turbiscan stability index. The combination of Ssa (0.05%) with 11S significantly affected the interfacial dilatational and emulsion properties although the interfacial properties were still dominated by the protein. Higher concentrations (0.1% and 0.2%) of Ssa combined with 11S synergistically decreased the interfacial tension, which was attributed to the interaction between 11S and Ssa. Using high Ssa concentrations (0.25%-0.5%) enhanced the long-term stability of emulsions (in response to external deformations) after 42 d. These results will aid the basic understanding of protein-Ssa interfacial adsorption during emulsion formation and can help prepare natural food additives for designing emulsions.

Multivariate analysis for FTIR in understanding treatment of used cooking oil using activated carbon prepared from olive stone.

In this study, activated carbons prepared from the green and black olive stone (green OSAC and black OSAC) were used as adsorbents to investigate their removal efficiencies for oxidation products and polar compounds from used sunflower and corn cooking oils. The degree of oxidation level and polar compounds were evaluated using Fourier transform infrared (FTIR) with the principal component analysis and ultra-performance liquid chromatography. Two FTIR absorption peaks were used for the oil evaluation, namely 3007-3009 cm-1, which is related to C-H symmetric stretching vibration of the cis double bonds, and ~1743 cm-1, which is related to = CH and ester carbonyl stretching vibration of the functional groups of the triglycerides, C = O. The principal component analysis results showed significant variations in the oxidation level of the sunflower and the corn oils occurred after consecutive heating and French fries frying for 10 days. The oxidation products that are adsorbed on the surface of the OSAC forms π-complexes with the C = C parts of the OSAC system. It can be concluded that the prepared adsorbents can be promising, efficient, economically effective, and environmentally friendly alternative adsorbents for oil treatment applications.

Effect of high pressure homogenization treatment on the rheological properties of citrus peel fiber/corn oil emulsion.

BACKGROUND: Citrus fiber is a main component in the peel of citrus and contains natural dietary fiber. It is often used as a functional additive to improve the texture or nutritional property of food. It is also widely used to reduce the content of absorbable fat in sausages and other meat products, and to improve food stability as an emulsifier. In this research, the dynamic rheological properties (linear and non-linear) of citrus peel fiber/corn oil (CF/CO) emulsion system under high pressure homogenization (HPH) treatment was investigated. RESULT: Rheological results illustrated HPH treatment significantly increased the apparent viscosity of the emulsion, reduced the activation energy of the emulsion and distinctly improved the viscoelasticity of the emulsion. Meanwhile, HPH treatment increased the linear viscoelastic region of the sample, and the behavior of the emulsion converted from strain thinning (without HPH treatment) to weak strain overshoot (with HPH treatment). Lissajous curves indicated the viscosity of the sample increased first and then decreased with strain increasing and the third harmonic contributed much more to the first harmonic compared with the fifth harmonic. Chebyshev stress decomposition revealed that, as strain increased, the samples with HPH treatment showed internal-cycle strain hardening behavior first, then turned to internal-cycle softening behavior. CONCLUSION: HPH treatment can significantly improve the processing performance of CF/CO emulsion as well as the stability against large periodic oscillations in food processing. © 2020 Society of Chemical Industry.

Zearalenone Removal from Corn Oil by an Enzymatic Strategy.

The estrogen-like mycotoxin zearalenone (ZEN) is one of the most widely distributed contaminants especially in maize and its commodities, such as corn oil. ZEN degrading enzymes possess the potential for counteracting the negative effect of ZEN and its associated high safety risk in corn oil. Herein, we targeted enhancing the secretion of ZEN degrading enzyme by Pichia pastoris through constructing an expression plasmid containing three optimized expression cassettes of zlhy-6 codon and signal peptides. Further, we explored various parameters of enzymatic detoxification in neutralized oil and analyzed tocopherols and sterols losses in the corn oil. In addition, the distribution of degraded products was demonstrated as well by Agilent 6510 Quadrupole Time-of-Flight mass spectrometry. P. pastoris GSZ with the glucoamylase signal was observed with the highest ZLHY-6 secretion yield of 0.39 mg/mL. During the refining of corn oil, ZEN in the crude oil was reduced from 1257.3 to 13 µg/kg (3.69% residual) after neutralization and enzymatic detoxification. Compared with the neutralized oil, no significant difference in the total tocopherols and sterols contents was detected after enzymatic detoxification. Finally, the degraded products were found to be entirely eliminated by washing. This study presents an enzymatic strategy for efficient and safe ZEN removal with relatively low nutrient loss, which provides an important basis for further application of enzymatic ZEN elimination in the industrial process of corn oil production.

Transglutaminase modifies the physical stability and digestibility of chickpea protein-stabilized oil-in-water emulsions.

This study sought to utilize enzymatic crosslinking to modulate the properties of chickpea-stabilized o/w emulsions and determine its effect on digestibility. Oil-in water emulsions were produced from 40% corn oil and 6% chickpea protein (w/w) with/without addition of transglutaminase (TG). Crosslinking increased the particle size and poly-dispersity, and led to the formation of a gel-like structure (G' > G″) with 1.5 order of magnitude higher G' compared to the non-crosslinked emulsion. Enzyme addition improved the emulsion physical stability (over a month) compared to the non-crosslinked emulsion that showed phase separation after two weeks of storage. Results of in vitro digestion showed decreased digestibility of TG-crosslinked chickpea-stabilized emulsions, while proteomic analysis revealed that the crosslinked emulsion is a source of bioactive peptides that are liberated by human digestive enzymes. Overall, application of TG can rationally modify the functionality and digestibility of o/w emulsions towards positive effects on human health.

Effects of plasma treatment on the oxidative stability of vegetable oil containing antioxidants.

Plasma, the fourth stage of matter, is a partially or wholly ionized state of gas. Degree of lipid oxidation and effects of antioxidants were evaluated in bulk oils at plasma treatment. Significant changes in the conjugated dienoic acid were induced after 10 min of plasma treatment, which corresponded to treatment for 2.5 h at 100 °C and 48 h at 60 °C. Tocopherol stability in the stripped corn oil was significantly higher than that in medium-chain triacylglycerol after the plasma treatment. The antioxidant capacities of 10 µM of α-tocopherol and sesamol were higher than that of ß-carotene, and synergistic effects among α-tocopherol, sesamol, and ß-carotene were not observed. Added α-tocopherol and sesamol decreased CDA formation by 33 and 30% compared to control samples after plasma treatment. Moisture content in oils decreased significantly about 20% moisture after 6 min plasma treatment. Lipid oxidation could be an important issue in plasma-treated lipid-rich products.