Partition efficiency of cytochrome c with alcohol/salt aqueous biphasic flotation system.

Aqueous biphasic flotation (ABF) integrates aqueous biphasic system (ABS) and solvent sublation for recovery of target biomolecules. The feasibility of the alcohol/salt ABF for exclusive partition of cytochrome c to one specific phase of the system was investigated. Aliphatic alcohols of different carbon chain length (ethanol, 1-propanol and 2-propanol) and salts (sulfate, phosphate and citrate) were used for the phase formation. The effects of phase composition, concentration of sample loading, pH, flotation time and flow rate of the system on the partition efficiency of cytochrome c were determined. Cytochrome c was exclusively partitioned to the alcohol-rich top phase of the ABF of 18% (w/w) ethanol and 26% (w/w) ammonium sulfate with pH 6 and 20% (w/w) of sample loading. Highest partition coefficient (K) of 6.85 ± 0.21 and yield (YT) of 99.40% ± 0.02 were obtained with optimum flotation rate of 10 mL/min and flow rate of 10 min.

Investigating the interaction of porcine pancreatic elastase and propanol: A spectroscopy and molecular simulation study.

The response of porcine pancreatic elastase (PPE) to propanol was examined by various techniques including UV-vis spectrophotometry, spectrofluorometry and circular dichroism, as well as molecular docking and molecular simulation. These techniques were used to investigate the structural changes and elastase activity in the presence of propanol. This work was performed at three temperatures of 303, 313 and 323 K, with the pH value of 8.5 (Tris buffer). The results of the UV-vis spectrophotometry indicated the transfer of tryptophan to an environment with low hydrophobicity. Fluorescence measurements also revealed the quenching of fluorescence intensity was induced by propanol, and dynamic quenching was the proposed quenching mechanism. Kinetic studies also suggested the inhibitory effect (noncompetitive) of propanol on elastase. Further, Circular Dichroism (CD) spectra showed that propanol caused slight alterations in the secondary structures of PPE (0.3% increase for the α-helix and 0.5% decrease for the ß-sheet). Addition of propanol decreased the Tm (Melting Temperature) parameter from 332.8 K to 330.1 K.

Reaction of 1-propanol with Ozone in Aqueous Media.

The main aim of this work is to substantiate the mechanism of 1-propanol oxidation by ozone in aqueous solution when the substrate is present in large excess. Further goals are assessment of the products, their formation yields as well as the kinetic parameters of the considered reaction. The reaction of ozone with 1-propanol in aqueous solution occurs via hydride transfer, H-abstraction and insertion. Of these three mechanisms, the largest share is for hydride transfer. This implies the extraction of an hydride ion from the activated C-H group by O3 according to reaction: (C2H5)(H)(HO)C-H + O3 → [(C2H5)(H)(HO)C+ + HO3-]cage → (C2H5)(H)(HO)C+ + HO3-. The experimentally determined products and their overall formation yields with respect to ozone are: propionaldehyde-(60 ± 3)%, propionic acid-(27.4 ± 1.0)%, acetaldehyde-(4.9 ± 0.3)%, acetic acid-(0.3 ± 0.1)%, formaldehyde-(1.0 ± 0.1)%, formic acid-(4.6 ± 0.3)%, hydrogen peroxide-(11.1 ± 0.3)% and hydroxyl radical-(9.8 ± 0.3)%. The reaction of ozone with 1-propanol in aqueous media follows a second order kinetics with a reaction rate constant of (0.64 ± 0.02) M-1·s-1 at pH = 7 and 23 °C. The dependence of the second order rate constant on temperature is described by the equation: l n   k I I = ( 27.17 ± 0.38 ) - ( 8180 ± 120 ) × T - 1 , which gives the activation energy, Ea = (68 ± 1) kJ mol-1 and pre-exponential factor, A = (6.3 ± 2.4) × 1011 M-1 s-1. The nature of products, their yields and the kinetic data can be used in water treatment. The fact that the hydride transfer is the main pathway in the 1-propanol/ozone system can probably be transferred on other systems in which the substrate is characterized by C-H active sites only.

Cononsolvency of Elastin-like Polypeptides in Water/Alcohol Solutions.

Elastin-like polypeptides (ELPs) are one of the most widely-studied classes of protein material because of their lower critical solution temperature (LCST)-like thermoresponsive behavior in aqueous solutions. Here, it is shown that ELPs also exhibit cononsolvency effects, similar to many other water-soluble polymers. The effect of solvent composition on the dilute solution phase behavior of an elastin-like polypeptide is studied here in water/alcohol blends that contain 0-40 vol % methanol, ethanol, isopropanol, or 1-propanol. In all systems studied, the ELP exhibits cononsolvency behavior at low alcohol content, as indicated by a decrease in the transition temperature of the ELP. When the alcohol added is ethanol, isopropanol, or 1-propanol, the decrease in transition temperature is followed by a region of complete ELP insolubility, and, finally, the emergence of upper-critical solution transition (UCST)-like behavior. The ELP is completely soluble at all temperatures measured at alcohol contents above 40 vol %. The effect of sodium chloride on this ELP cononsolvency in water/ethanol blends was also studied. Unlike the previously studied polymer poly( N-isoropylacrylamide) (PNIPAM), ELP exhibits nonmonotonic changes in transition temperature with the addition of sodium chloride at ethanol contents that produce UCST-like transitions of the ELP. This discovery of ELP cononsolvency in water/alcohol systems introduces a new handle with which the solubility of ELPs can be tuned.

Photochemical and photocatalytic degradation of 1-propanol using UV/H2 O2 : Identification of malonate as byproduct.

1-propanol is a primary alcohol extensively used in the pharmaceutical, chemical, and food industries. It has been also found as a contaminant in the atmosphere and is considered a model compound to mimic the behavior and fate of aliphatic alcohols exposed to environmental conditions. In order to understand that role of relevant variables, this paper presents results obtained with a simple experimental set-up to investigate the reactivity of 1-propanol under mild oxidizing conditions. Coupling this system with CE-C4 D allowed the quantification of the carboxylic acids formed. For the described experiments, aqueous solutions of 1-propanol were placed inside a photoreactor and oxidized upon the addition of TiO2 and/or H2 O2 . According to the described results, the addition of H2 O2 (0.1% w/w) was the most significant variable, roughly tripled the amount of carboxylic acids generated and led to the conversion of up to 70% of the initially available 1-propanol (1 mmol/L). More importantly, the reaction yielded the formation (within 10 min) of propionate (50 µmol/L), acetate (400 µmol/L), formate (50 µmol/L), and malonate (200 µmol/L). The latter is critically important because it represents the first example of the photochemical oxidation of both terminal carbons of the C3 -chain of 1-propanol under mild conditions, and opens new avenues for the production of this important chemical building block.

3-NOP: Mutagenicity and genotoxicity assessment.

3-NOP (3-nitroxy-propanol) is a new development compound which reduces methane emission from ruminating animals. For registration purposes with emphasis on EU and North America data requirements, mutagenic and genotoxic potential was assessed following OECD protocols and respective guidance documents. 3-NOP mutagenicity and genotoxicity testing raised no flags with regard to these endpoints. In silico assessment of 3-NOP and its major plasma metabolite NOPA (3-nitroxy-propionic acid) were predicted negative with regard to the bacterial reverse mutation (Ames) test. Ames test, mouse lymphoma assay, in vitro micronucleus test, and the oral in vivo micronucleus test using rat bone marrow were all negative. Exposure of the rat bone marrow was verified by the presence of 3-NOP and its metabolites NOPA and HPA (3-hydroxy-propionic acid) a naturally occurring substance in mammals) in plasma following oral dosing. It is therefore concluded that 3-NOP and its metabolites pose no mutagenic and genotoxic potential.

Extraction of lycopene using a lecithin-based olive oil microemulsion.

Incorporation of many water-insoluble nutraceuticals into aqueous formulations can present a real challenge for food industry. Hence, establishment of novel technologies for concurrent extraction and solubilisation of lipophilic compounds might be of a great interest. The main objective of the present study was to prepare olive oil microemulsions using different proportions of lecithin, 1-propanol, olive oil and water to examine their abilities to form microemulsion as well as extraction of lycopene from industrial tomato pomace. Lycopene extraction using 1 g tomato pomace and 4 extraction cycles applying 5 g microemulsion composed of lecithin: 1-propanol: olive oil: water (53.33:26.67:10:10 wt%) resulted in the highest extraction efficiency (88%). Such biocompatible and food-grade microemulsion containing lycopene can be applied in many food formulations where it can present a good solubility in aqueous and non-polar media and can improve the health-promoting properties of both lycopene and olive oil.

Solvent Mediation of Peptide Conformations: Polyproline Structures in Water, Methanol, Ethanol, and 1-Propanol as Determined by Ion Mobility Spectrometry-Mass Spectrometry.

Ion mobility spectrometry and circular dichroism spectroscopy are used to examine the populations of the small model peptide, polyproline-13 in water, methanol, ethanol, and 1-propanol over a range of solution temperatures (from 288 to 318 K). At low temperatures, the less-polar solvents (1-propanol and ethanol) favor the all-cis polyproline I helix (PPI); as the temperature is increased, the trans-configured polyproline II helix (PPII) is formed. In polar solvents (methanol and water), PPII is favored at all temperatures. From the experimental data, we determine the relative stabilities of the eight structures in methanol, ethanol, and 1-propanol, as well as four in water, all with respect to PPII. Although these conformers show relatively small differences in free energies, substantial variability is observed in the enthalpies and entropies across the structures and solvents. This requires that enthalpies and entropies be highly correlated: in 1-propanol, cis-configured PPI conformations are energetically favorable but entropically disfavored. In more polar solvents, PPI is enthalpically less favorable and entropy favors trans-configured forms. While either ΔH0 or ΔS0 can favor different structures, no conformation in any solvent is simultaneously energetically and entropically stabilized. These data present a rare opportunity to examine the origin of conformational stability. Graphical Abstract ᅟ.

Propanol - Sugar aqueous biphasic systems as a suitable platform for biomolecules extraction.

Aiming at designing efficient extraction processes, this work proposes the novel aqueous biphasic systems (ABS) composed of sugars and alcohols. The complete liquid-liquid phase diagrams (binodal curves and tie-lines) for several ternary systems of {water + 1-propanol / 2-propanol + sugar (mono- and di-saccharides, and their polyols)} were determined, for the first time. The main factors which affect the phase separation ability of these systems, such as temperature, structure and stereochemistry of sugars, and the alcohol type were discussed. In all the studied ABS, the top phase is alcohol-rich with lower water content, while the bottom phase is sugar-rich with higher water content. The partitioning behavior of two alkaloids (caffeine and codeine) and a flavoring antioxidant (vanillin) in the produced ABS was evaluated. In all the partitioning experiments, caffeine and vanillin have a preferable tendency to concentrate in the more hydrophobic alcohol-rich phase, however, codeine preferentially migrate to the more hydrophilic sugar-rich phase. The selectivity index of the alcohol-sugar ABS to separate compounds of the same family (caffeine and codeine) was calculated and found to be higher than 25 at optimum conditions. In general, the more soluting-out ability of sugars, the more difference in the water content of the coexisting phases, and the longer tie-line length lead to the better extraction performance of the propanol-sugar ABS. Heating has a favorable effect on the preferential partitioning of caffeine and codeine, but it is unfavorable for extraction of vanillin. From the results gathered, the novel ABS produced in this work provide efficient and money-saving extraction platforms, and can selectively separate similar biomolecules.

Radiosynthesis of 1-iodo-2-[11 C]methylpropane and 2-methyl-1-[11 C]propanol and its application for alkylation reactions and C-C bond formation.

The multitude of biologically active compounds requires the availability of a broad spectrum of radiolabeled synthons for the development of positron emission tomography (PET) tracers. The aim of this study was to synthesize 1-iodo-2-[11 C]methylpropane and 2-methyl-1-[11 C]propanol and investigate the use of these reagents in further radiosynthesis reactions. 2-Methyl-1-[11 C]propanol was obtained with an average radiochemical yield of 46 ± 6% d.c. and used with fluorobenzene as starting material. High conversion rates of 85 ± 4% d.c. could be observed with HPLC, but large precursor amounts (32 mg, 333 µmol) were needed. 1-Iodo-2-[11 C]methylpropane was synthesized with a radiochemical yield of 25 ± 7% d.c. and with a radiochemical purity of 78 ± 7% d.c. The labelling agent 1-iodo-2-[11 C]methylpropane was coupled to thiophenol, phenol and phenylmagnesium bromide. Average radiochemical conversions of 83% d.c. for thiophenol, 40% d.c. for phenol, and 60% d.c. for phenylmagnesium bromide were obtained. In addition, [11 C]2-methyl-1-propyl phenyl sulphide was isolated with a radiochemical yield of 5 ± 1% d.c. and a molar activity of 346 ± 113 GBq/µmol at the end of synthesis. Altogether, the syntheses of 1-iodo-2-[11 C]methylpropane and 2-methyl-1-[11 C]propanol were achieved and applied as proof of their applicability.

Glutathione-Dependent Formaldehyde Dehydrogenase Homolog from Bacillus subtilis Strain R5 is a Propanol-Preferring Alcohol Dehydrogenase.

Genome search of Bacillus subtilis revealed the presence of an open reading frame annotated as glutathione-dependent formaldehyde dehydrogenase/alcohol dehydrogenase. The open reading frame consists of 1137 nucleotides corresponding to a polypeptide of 378 amino acids. To examine whether the encoded protein is glutathione-dependent formaldehyde dehydrogenase or alcohol dehydrogenase, we cloned and characterized the gene product. Enzyme activity assays revealed that the enzyme exhibits a metal ion-dependent alcohol dehydrogenase activity but no glutathione-dependent formaldehyde dehydrogenase or aldehyde dismutase activity. Although the protein is of mesophilic origin, optimal temperature for the enzyme activity is 60°C. Thermostability analysis by circular dichroism spectroscopy revealed that the protein is stable up to 60°C. Presence or absence of metal ions in the reaction mixture did not affect the enzyme activity. However, metal ions were necessary at the time of protein production and folding. There was a marked difference in the enzyme activity and CD spectra of the proteins produced in the presence and absence of metal ions. The experimental results obtained in this study demonstrate that the enzyme is a bona-fide alcohol dehydrogenase and not a glutathione-dependent formaldehyde dehydrogenase.

A novel cholesterol/lipid delivery system for murine myeloma cell lines.

Murine myeloma NS0 cells are cholesterol-dependent auxotrophs and require externally provided cholesterol for sustained growth. Traditionally, cholesterol is provided to these cells by supplementing cell culture media with a concentrated solution of cholesterol and other water insoluble components dissolved in 200-proof ethanol. However, the solubility of cholesterol in ethanol is limited, and for processes requiring large amounts of cholesterol, the consequential increase in added ethanol may negatively impact cell growth. Additionally, the flammability of 200-proof ethanol may restrict the preparation scale and storage volumes at a large-scale facility, thus resulting in a more complex preparation procedure due to safety guidelines. This study proposes 1-propanol as an alternative solvent, which can dissolve up to 40 g L-1 of cholesterol along with other water insoluble components, as compared to ethanol, which can dissolve up to 10 g L-1 of the same. A concentrated formulation simplifies the preparation method and ameliorates the procedural and operational challenges, as well as reduces the total amount of alcohol added to a cell culture by ∼80% when compared to the ethanolic solution, to deliver the same amount of cholesterol, thereby significantly minimizing alcohol exposure to the cells and mitigating the fire hazards at a large-scale facility. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:795-803, 2017.

Plant phenyl-propanoids-conjugated silver nanoparticles from edible plant Suaeda maritima (L.) dumort. Inhibit proliferation of K562-human myeloid leukemia cells.

The present study portrays the isolation of four phenylpropanoids - ferulic acid (FA), sinapic acid (SA), caffeic acid (CA), and chlorogenic acid (CHA) from the water extract of Suaeda maritima (L.) Dumort, a phytochemically less explored Indian medicinal plant. Further, synthesis and characterization of silver and gold nanoparticles using the isolated phenylpropanoids were done. The silver nanoparticles synthesized from S. maritima water extract along with silver nano-conjugated forms of the isolated compounds exhibited appreciable anti-leukemic activity against K562 cells (human myeloid leukemia). Especially, the ferulic and CA-conjugated silver nanoparticles showed significant (P < .01) activity against leukemia.

Nonpolar Solvation Free Energy from Proximal Distribution Functions.

Using precomputed near neighbor or proximal distribution functions (pDFs) that approximate solvent density about atoms in a chemically bonded context one can estimate the solvation structures around complex solutes and the corresponding solute-solvent energetics. In this contribution, we extend this technique to calculate the solvation free energies (ΔG) of a variety of solutes. In particular we use pDFs computed for small peptide molecules to estimate ΔG for larger peptide systems. We separately compute the non polar (ΔGvdW) and electrostatic (ΔGelec) components of the underlying potential model. Here we show how the former can be estimated by thermodynamic integration using pDF-reconstructed solute-solvent interaction energy. The electrostatic component can be approximated with Linear Response theory as half of the electrostatic solute-solvent interaction energy. We test the method by calculating the solvation free energies of butane, propanol, polyalanine, and polyglycine and by comparing with traditional free energy simulations. Results indicate that the pDF-reconstruction algorithm approximately reproduces ΔGvdW calculated by benchmark free energy simulations to within ∼ kcal/mol accuracy. The use of transferable pDFs for each solute atom allows for a rapid estimation of ΔG for arbitrary molecular systems.

Solute-Solvent Energetics Based on Proximal Distribution Functions.

We consider the hydration structure and thermodynamic energetics of solutes in aqueous solution. On the basis of the dominant local correlation between the solvent and the chemical nature of the solute atoms, proximal distribution functions (pDF) can be used to quantitatively estimate the hydration pattern of the macromolecules. We extended this technique to study the solute-solvent energetics including the van der Waals terms representing excluded volume and tested the method with butane and propanol. Our results indicate that the pDF-reconstruction algorithm can reproduce van der Waals solute-solvent interaction energies to useful kilocalorie per mole accuracy. We subsequently computed polyalanine-water interaction energies for a variety of conformers, which also showed agreement with the simulated values.

Food grade microemulsion systems: canola oil/lecithin:n-propanol/water.

In this study, the capability of a natural surfactant, lecithin, and the influence of ionic strength, pH, and temperature on some properties of a food grade microemulsion system were evaluated. For this purpose, the pseudoternary phase diagrams of canola oil/lecithin:n-propanol/water microemulsions in the presence of different salts (NaCl and CaCl2), ionic strengths, pHs, and temperatures were constructed. Our findings showed that the presence of salts slightly increased the W/O areas on the phase diagrams, whereas pH variation was not effective on the microemulsion formation. The expansion of microemulsion areas with temperature indicated the greater triglycerides solubilization capacity of lecithin based microemulsions at higher temperatures. These findings revealed the efficiency of lecithin-based microemulsion system for solubilization of triglycerides which can potentially be used for extraction of edible vegetable oils particularly canola oil.

Lipophilisation of Caffeic Acid through Esterification with Propanol Using Water-tolerable Acidic Ionic Liquid as Catalyst.

Propyl caffeate was synthesized to produce lipophilic antioxidant, which used caffeic acid and propanol as starting materials, acidic ionic liquid as catalyst. The highest yield of propyl caffeate (98.7±0.8%) have been achieved under the optimum as follows: 1-butylsulfonic-3-methylimidazolium tosylate showed the best catalytic performance, molar ratio of caffeic acid to propanol was 1:20, reaction temperature was 90°C and the amount of acidic ionic liquid was 40%. The relationship between temperature and the forward rate constant gave the activation energy of 33.6 kJ mol(-1), which indicated that acidic ionic liquid possesses high catalytic activity in the synthesis of PC. And the activity of acidic ionic liquid was not inhibited by the water produced during the esterification process. More importantly, this reaction system can even proceed smoothly when initial water content was 5%.

The Occurrence of Propyl Lactate in Chinese Baijius (Chinese Liquors) Detected by Direct Injection Coupled with Gas Chromatography-Mass Spectrometry.

As one of the oldest distillates in the world, flavor compounds of Chinese Baijiu (Chinese liquor) were extremely complex. Propyl lactate was firstly detected by direct injection and gas chromatography-mass spectrometry (GC-MS) in 72 Chinese Baijius. The objectives were to detect the contents of propyl lactate and evaluate its contribution to the aroma of Chinese Baijiu based on odor activity values (OAVs). The levels of propyl lactate in these distillates were determined by internal standard method and selective ion monitoring (SIM), which ranged from 0.050 to 1.900 mg∙L(-1) under investigation. Its detection threshold was determined by Three-Alternative Forced-Choice (3-AFC) and curve fitting (CF), which was 0.740 mg∙L(-1) in 38% ethanol solution. The contribution of propyl lactate on the aroma of these distillate drinks was evaluated by their odor activity values (OAVs), which varied from 0.066 to 4.440. The OAVs of propyl lactate were found to exceed 1 in 13 Chinese Baijius, including 50° Jingzhi Guniang 5 years (4.440), 52° Jingzhi Guniang 10 years (3.024), Jingyanggang (2.568), Xianghe Ronghe Shaofang (2.313), and 1956 Laolang (1.431), which indicated that propyl lactate was one of odor-active components in these Chinese Baijius.

Easy approach to assembling a biomimetic color film with tunable structural colors.

The self-assembly of silica microspheres into a close-packed array is a simple method of fabricating three-dimensional photonic crystal structural color films. However, the color is very dull because of the interferences of scattering and background light. In this study, we added a small quantity of surface-modified carbon black (CB) to the system of colloidal silica in n-propanol. The use of n-propanol as a dispersant is beneficial to the rapid development of photonic crystal films during the process of dip-coating. The doping of CB into silica microspheres can absorb background and scattering light, resulting in vivid structural colors.