Optimization of the radiosynthesis of [68Ga]Ga-PSMA-11 using a Trasis MiniAiO synthesizer: do we need to heat and purify?

INTRODUTION:: [Ga]Ga-prostate specific membrane antigen (PSMA)-11 showed a clear gain in sensitivity for lesion detection in the biological recurrence of prostate cancer as compared to the standard [F]fluorocholine radiopharmaceutical. To meet the strong demand for [Ga]Ga-PSMA-11, we aimed to optimize an automated radiolabeling process by evaluating the influence of different key parameters on radiochemical purity and radiochemical yield. METHODS: The radiosynthesis of [Ga]Ga PSMA-11 was performed using a Trasis MiniAio synthesizer and a Ge/Ga GalliaPharm generator supplied by Eckert & Ziegler, Berlin, Germany. Optimized labeling parameters were evaluated by variation of sodium acetate concentrations and temperature of radiolabeling as well as the purification process. RESULTS: For each condition tested, radiochemical purity was higher than 99% in the final vial without batch failure, indicating a robust and fast radiosynthesis process. Radiosynthesis without the solid phase extraction purification process at room temperature in less than 5 min resulted in a radiolabeling efficiency of over 99% and remained stable at least 4 h without manual processing to limit operator radiation exposure. CONCLUSION: The procedure was completely automated and provided a high radiochemical yield. It can be performed several times a day, facilitating the clinical demand of this radiopharmaceutical.

Molecular and technical aspects on the interaction of serum albumin with multifunctional food preservatives.

Synthetic food preservatives like sodium acetate (SA), sodium benzoate (SB), potassium sorbate (PS) and Butyl paraben (BP) have been widely used in food and pharmacy industries. One of the toxicological aspects of food additives is evaluation of their interaction with serum proteins such as albumin. These additives interaction with human serum albumin (HSA) can exert considerable effect on the absorption, distribution, metabolism and toxicity of chemical compounds. It should be noticed that the aforementioned food preservatives intake increase mainly in the presence of glucose may lead to complex formation of SA, SB, PS and BP with HSA and accelerate the development of variety disease such as cancer, diabetes, multiple sclerosis, brain damage, nausea and cardiac disease. Therefore, to understand the mechanisms of aforementioned food additives interaction and conformational changes of proteins, we aim to review various studies that investigated albumin interaction with these additives using several procedures.

Characterisation of aluminium release by the enFlow® fluid-warming system in crystalloids and blood products.

The use of uncoated aluminium-heated plates in an intravenous fluid-warming system has been shown to produce high levels of aluminium in Sterofundin 1/1E, a balanced crystalloid solution. However, the effect of this fluid-warming device on other balanced crystalloid solutions and blood products has not been studied. Using mass spectrometry we measured aluminium levels in Plasma-Lyte 148, compound sodium lactate solution, 4% human albumin solution, expired resuspended packed red cells and fresh frozen plasma that were pumped through an enFlow® fluid-warming system at 2 ml.min-1 . Samples were taken at baseline before heating and then at 10-min intervals up to 60 min with the system set to warm the fluids to 40 °C. High concentrations of aluminium were found for Plasma-Lyte 148 and compound sodium lactate solutions (mean (SD) 223 (0.6) µmol.l-1 and 163 (0.2) µmol.l-1 at 60 min, respectively); both concentrations were significantly greater than the United States Food and Drug Administration recommended maximum limit for aluminium in intravenous nutrition of 25 µg.l-1 (0.9 µmol.l-1 ). Lower aluminium levels were found in 4% human albumin solutions, expired resuspended red cells and fresh frozen plasma at 60 min (mean (SD) 5.7 (0.1) µmol.l-1 , 2.7 (0.0) µmol.l-1 and 2.3 (0.4) µmol.l-1 , respectively). The process allowing addition of aluminium to be added to Sterofundin 1/1E by the enFlow fluid warmer also occurs in Plasma-Lyte 148 and compound sodium lactate solutions and to a lesser degree in blood products. The exact mechanism facilitating this process and its clinical significance remain unclear.

14C-Labelling of the natural steroid estrogens 17α-estradiol, 17ß-estradiol, and estrone.

The worldwide environmental occurrence of natural steroid estrogens has drawn increasing concerns. However, the fate of the estrogens, especially the α-isomer of estradiol, in the environmental matrices is still obscure. Using 14C-radioactively labelled forms of these estrogens can facilitate and is sometimes a prerequisite for studying their transformation and residual distribution in the environment, but the availability of labelled compounds (owing to commercially high prices or unavailable) hampers such studies. Here we developed simple and stable methods to synthesize 14C-labelled estradiol isomers and estrone using relatively low-priced [carboxyl-14C]-labelled sodium acetate as a precursor. The radiochemical syntheses started from an enol lactone, which was prepared from nandrolone by oxidation to open the A-ring followed by recyclization. Inversion of the 17ß-hydroxyl group into its 17α-form was achieved via the Walden inversion using the Mitsunobu reaction. [3-14C]-17ß-estradiol, [3-14C]-17α-estradiol, and [3-14C]-estrone were synthesized in five, six, and seven steps with an overall radiochemical yield of 17.4%, 16.2%, and 13.9%, respectively. The synthesized 14C-labelled compounds provide materials for studying the fate and behavior of estrogens in complex environmental matrixes and for further synthesis of their 14C-labelled sulfate and glucuronide conjugates.

Optimization of a Labeling and Kit Preparation Method for Ga-68 Labeled DOTATATE, Using Cation Exchange Resin Purified Ga-68 Eluates Obtained from a Tin Dioxide 68Ge/68Ga Generator.

PURPOSE: The aim of this study was to optimize a radiolabeling method using cationic processed Ga-68 eluates from a SnO2-based 68Ge/68Ga generator, followed by the development of DOTA-Tyr3-Thre8-octreotide (DOTATATE) kits. PROCEDURES: Diluted generator eluates were adsorbed on a SCX resin and desorbed with acidified 5 M NaCl solution. Optimized labeling conditions were determined by variation of pH, using 35 µg DOTATATE and sodium acetate buffer. DOTATATE kits were developed based on optimized radiolabeling conditions, were labeled, and evaluated. RESULTS: Optimized labeling conditions resulted in a radiolabeling efficiency of around 99 % and radiochemical yield of almost 85 %. Different kit preparation methods did not significantly influence the radiolabeling results. Kits were found to be stable over 3 months. CONCLUSION: A labeling method using SCX-processed Ga-68 eluates was optimized. DOTATATE kits specifically for these SCX-processed Ga-68 eluates were successfully formulated. A post-labeling Sep-Pak C18 purification should be optional.

Engineering fast dissolving sodium acetate mediated crystalline solid dispersion of docetaxel.

It is hypothesized that a novel crystalline solid dispersion (CSD) of docetaxel (C-DXT) can be engineered by dispersing native docetaxel (DXT, a BCS class II drug) in sodium acetate crystal (SA). DXT is dissolved in glacial acetic/SA solution and freeze-dried. The resulting C-DXT is characterized by differential scanning calorimetry (DSC), powder X-ray analysis (PXRD), LC-MS/MS, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Quartz crystal microbalance with dissipation monitoring (QCM-D) and dynamic light scattering (DLS). Its cytotoxicity on model cancerous (MCF-7, MDA-MB-468) and normal breast cells (MCF-10A) is assessed by MTS assay. SEM/TEM data and the absence of the characteristics peaks of DXT on the DSC curve (at 193.4 °C) and the XRD scan (at 2θ = 15.31 °C and 23.04 °C) confirm the presence of C-DXT in SA. The LC-MS/MS data indicates the chemical stability of DXT. The yield and C-DXT loading are 95.2% and 6.52% w/w, respectively. The C-DXT rapidly forms an aqueous non-rigid nanosuspension with a faster drug dissolution rate compared to native DXT. Unlike, control Tween 80/ethanol, SA is noncytotoxic to normal cells. However, C-DXT's cytotoxicity is time and dose dependent for all diseased cells. This unique CSD process might be applicable to other hydrophobic bioactive agents to enhance their safety and efficacy.

Self-aggregation of water-dispersible nanocollagen helices.

Inspired by nature, collagen is an outstanding polypeptide utilized to exploit its bioactivity and material design for healthcare technologies. In this study, we describe the self-aggregation of water-dispersible nanocollagen helices upon solidification to fabricate different forms of natural collagen materials. Chemically extracted native collagen fibrils are uniform anisotropic nanoparticles with an average diameter of about 50 nm and a high aspect ratio. The as-prepared collagen nanofibrils are soluble in sodium acetate-acetic acid buffer and are dispersible in water, thus generating collagen liquids that are used as distinct biopolymer precursors for materials development. Our interesting findings indicate that water-dispersible collagen-derived alcogels undergo critical point drying to self-arrange hierarchical nanofibrils into helix bundles in collagen sponge-like aerogels. Notably, using lyophilization to remove water in the biopolymer dispersion, a full regeneration of solidified fibers is achieved, producing collagen aerogels with lightweight characteristics similar to natural cottons. The self-aggregation of water-dispersible collagen occurs under freeze-drying conditions to turn individual nanofibrils into sheets with layered structures in the aerogel networks. The development of transparent, water resistant collagen bioplastic-like membranes was achieved by supramolecular self-assembly of water-dispersible collagen nanofibrils. Our efforts present a reliable concept in soft matter for creating promising collagen examples of liquids, hydrogels, aerogels, and membranes to increase utilization value of native collagen for biomedicine, pharmaceuticals, cosmetics, and nutrients.

Toxicity assessment of the extractables from multi-layer coextrusion poly ethylene bags exposed to pH=5 solution containing 4% benzyl alcohol and 0.1 M sodium acetate.

A non-target analysis was developed for the analysis of extractables from multi-layer coextrusion bags exposed to 4% benzyl alcohol solution and 0.1 M sodium acetate at pH = 5 for defined periods (15 day, 45 day and 90 day) according to manufacturer instructions based on the ultra-performance liquid chromatography (UPLC) quadrupole-time of flight mass spectrometry (Q-TOF MS). In order to confirm the extractables, principal component analysis (PCA) was used to indicate the differences among samples of different periods. Then, the extractables were identified based on searching the self-built library or online searching. The total content of extractables of 90 day samples was 589.78 µg/L, and the content was in the range of acceptable levels for pharmaceutical manufacturers. The risk assessment of the extractables were evaluated by Toxtree and T.E.S.T. software to avoid the animals bioexperiment.

Sensitivity enhancement of aminoglycosides in hydrophilic interaction liquid chromatography with tandem mass spectrometry by post-column addition of trace sodium acetate in methanol.

The development of a sensitive and accurate analytical method for monitoring aminoglycosides in food, environmental, and clinical samples is needed for many purposes. This study found that the responses of sodiated and protonated aminoglycosides in hydrophilic interaction chromatography with tandem mass spectrometry were enhanced upon addition of sodium acetate in methanol (5 mg L-1 at a flow rate of 0.2 mL min-1) as a post-column reagent. The sensitivities of sodiated spectinomycin, kanamycin, gentamicins, neomycin, and amikacin were significantly higher than those of the protonated molecules. Streptomycin and dihydrostreptomycin only formed protonated molecules, suggesting the preferential ionisation of the guanidine moieties in these aminoglycosides. The limits of quantification of these aminoglycosides were 0.19-2.5 ng mL-1. Notably, this is the first quantification of aminoglycosides that uses the sodiated molecules. The enhancement technique enables us to eliminate a concentration step from the clean-up process from food samples. We also proposed a rapid analytical method for residual aminoglycosides in milk and meat samples; validation showed good accuracy and precision of this method at the Japanese maximum residual limits of aminoglycosides (40-500 µg kg-1). The application of this method to contaminated bovine tissues revealed remarkably high residual levels of kanamycin. This technique will be useful for the sensitive detection of aminoglycosides not only in food, but also in environmental samples and human plasma.

iTRAQ analysis of low-phytate mung bean sprouts treated with sodium citrate, sodium acetate and sodium tartrate.

The effects of sodium citrate (SC), sodium acetate (SA) and sodium tartrate (ST) spraying on mung bean germination were investigated. Exogenous SC, ST and SA treatments significantly reduced the phytic acid content and increased the antioxidant enzyme activities. In this study, an iTRAQ-based proteomic approach was employed to explore the proteomes of mung bean sprouts, and 81, 101 and 90 differentially expressed proteins were identified in 4-day-old SC-, SA- and ST-treated mung bean sprouts, with 38 proteins present in all samples. Functional classification analysis showed that most of the differentially expressed proteins in mung bean sprouts subjected to the three treatments were involved in carbohydrate and energy metabolism. The inhibitory effect of the SA treatment was probably due to impairments in protein biosynthesis, whereas enhanced energy metabolism, accelerated reserve hydrolysis and protein processing were very important strategies for growth stimulation in response to ST and SC treatments.

Acetate ions enhance load and stability of doxorubicin onto PEGylated nanodiamond for selective tumor intracellular controlled release and therapy.

A successful drug delivery device for cancer chemotherapy should ideally be able to load drugs highly, bring the drug preferentially into tumor cells and reduce its distribution in normal tissue to enhance therapeutic efficacy. To this purpose, a novel protocol for DOX-loaded PEGylated nanodiamond (ND-PEG-DOX/NaAc, NPDA) was fabricated using sodium acetate medium. The NPDA nanoparticles exhibited a maximum loading efficiency (99 wt%) with ultra-low drug leakage (7 wt%). Examination by confocal microscope and flow cytometer showed that the NPDA uptake by cells was time-dependent, with a slow and sustained drug release from the lysosomes at a low pH. Also, when CHO (a normal cell) and MCF-7 (a cancer cell) were treated with NPDA, the results demonstrated that NPDA preferentially accumulated much more in tumor cells than in normal cells, which implied that NPDA has the ability to selectively kill tumor cells. In addition, NPDA can inhibit the migration and proliferation of tumor cells and change the cell cycle compared to the free drug. Outcomes from this work suggest that NPDA would be a promising drug delivery platform and the preparation of such a drug delivery system will also have implications in improving the biomedical applications of smart nanodiamond carriers.

The Combination of DGT Technique and Traditional Chemical Methods for Evaluation of Cadmium Bioavailability in Contaminated Soils with Organic Amendment.

Organic amendments have been proposed as a means of remediation for Cd-contaminated soils. However, understanding the inhibitory effects of organic materials on metal immobilization requires further research. In this study colza cake, a typical organic amendment material, was investigated in order to elucidate the ability of this material to reduce toxicity of Cd-contaminated soil. Available concentrations of Cd in soils were measured using an in situ diffusive gradients in thin films (DGT) technique in combination with traditional chemical methods, such as HOAc (aqua regia), EDTA (ethylene diamine tetraacetic acid), NaOAc (sodium acetate), CaCl2, and labile Cd in pore water. These results were applied to predict the Cd bioavailability after the addition of colza cake to Cd-contaminated soil. Two commonly grown cash crops, wheat and maize, were selected for Cd accumulation studies, and were found to be sensitive to Cd bioavailability. Results showed that the addition of colza cake may inhibit the growth of wheat and maize. Furthermore, the addition of increasing colza cake doses led to decreasing shoot and root biomass accumulation. However, increasing colza cake doses did lead to the reduction of Cd accumulation in plant tissues, as indicated by the decreasing Cd concentrations in shoots and roots. The labile concentration of Cd obtained by DGT measurements and the traditional chemical extraction methods, showed the clear decrease of Cd with the addition of increasing colza cake doses. All indicators showed significant positive correlations (p < 0.01) with the accumulation of Cd in plant tissues, however, all of the methods could not reflect plant growth status. Additionally, the capability of Cd to change from solid phase to become available in a soil solution decreased with increasing colza cake doses. This was reflected by the decreases in the ratio (R) value of CDGT to Csol. Our study suggests that the sharp decrease in R values could not only reflect the extremely low capability of labile Cd to be released from its solid phase, but may also be applied to evaluate the abnormal growth of the plants.

Experimental study using the dilution incubation method to assess water biostability.

Water biostability is of particular concern to water supply as a major limiting factor for heterotrophic bacterial growth in water distribution systems. This study focused on bacterial growth dynamics in the series dilution of water samples with TOC (total organic carbon) values determined beforehand. The results showed that the specific growth rate of Pseudomonas fluorescens P17 varied dramatically and irregularly with TOC value when TOC concentrations were low enough during the initial periods of incubation under given conditions. According to this relationship between bacterial growth rate and TOC, a dilution incubation method was designed for the study of water biostability. With the method under a given condition, a turning-point TOC value was found at a relatively fixed point in the curve between bacterial growth rate and TOC of water sample, and the variation of growth rate had different characteristics below the turning-point TOC value relative to that over this value. A turning-point TOC value similarly existed in all experiments not only with tap water, but also with acetate and mixed solutions. And in the dilution incubation method study, the affections were analyzed by condition factors such as inoculum amount, incubation time and nature of the organic carbon source. In very low organic carbon water environments, the variation characteristics of bacterial growth rate will be useful to further understand the meaning of water biostability.

13C-sodium acetate breath test for evaluation of gastric emptying times in dogs with gastric dilatation-volvulus.

OBJECTIVE: The aim of the study was to assess solid phase gastric emptying via non-invasive 13C-sodium acetate breath test in large breed dogs with or without gastric dilatation-volvulus (GDV). MATERIAL AND METHODS: Dogs were recruited into one of the following groups: group 1 = healthy large breed dogs with no history of GDV, group 2 = dogs that underwent elective abdominal surgery for reasons unrelated to the gastrointestinal tract, and group 3 = dogs that underwent laparotomy and gastropexy to correct GDV. The dogs were fed a test meal containing 100 mg 13C-sodium acetate (for group 2 and 3, this was < 48 hours post-operatively). Breath samples were obtained at baseline and every 30 minutes for 3 hours, then every hour for a total of 7 hours. 12CO2/13CO2 ratio was measured for each breath sample via non-dispersive infrared spectroscopy and 25%, 50% and 75% gastric emptying times were calculated and compared between groups. RESULTS: Gastric emptying times were significantly prolonged in dogs undergoing surgery (group 2) compared to group 1 and 3. Also, gastric emptying times of dogs with GDV were significantly prolonged compared to controls, but not to the same extent as dogs in group 2. CONCLUSION AND CLINICAL SIGNIFICANCE: There was a significant effect of abdominal surgery on gastric emptying times. Surprisingly, dogs after GDV surgery and gastropexy had shorter gastric emptying times than dogs undergoing laparotomy for reasons other than GDV, but still prolonged compared to healthy controls. The reason for these differences requires further study.

Modeling of mixed-mode chromatography of peptides.

Mixed-mode chromatographic materials are more and more often used for the purification of biomolecules, such as peptides and proteins. In many instances they in fact exhibit better selectivity values and therefore improve the purification efficiency compared to classical materials. In this work, a model to describe biomolecules retention in cation-exchange/reversed-phase (CIEX-RP) mixed-mode columns under diluted conditions has been developed. The model accounts for the effect of the salt and organic modifier concentration on the biomolecule Henry coefficient through three parameters: α, ß and γ. The α parameter is related to the adsorption strength and ligand density, ß represents the number of organic modifier molecules necessary to displace one adsorbed biomolecule and γ represents the number of salt molecules necessary to desorb one biomolecule. The latter parameter is strictly related to the number of charges on the biomolecule surface interacting with the ion-exchange ligands and it is shown experimentally that its value is close to the biomolecule net charge. The model reliability has been validated by a large set of experimental data including retention times of two different peptides (goserelin and insulin) on five columns: a reversed-phase C8 column and four CIEX-RP columns with different percentages of sulfonic groups and various concentration values of the salt and organic modifier. It has been found that the percentage of sulfonic groups on the surface strongly affects the peptides adsorption strength, and in particular, in the cases investigated, a CIEX ligand density around 0.04µmol/m(2) leads to optimal retention values.

Studies of the pattern recognition molecule H-ficolin: specificity and purification.

Ficolins are pattern recognition molecules of the innate immune system. H-ficolin is found in plasma associated with mannan-binding lectin-associated serine proteases (MASPs). When H-ficolin binds to microorganisms the MASPs are activated, which in turn activate the complement system. H-ficolin is the most abundant ficolin in humans, yet its ligand binding characteristics and biological role remain obscure. We examined the binding of H-ficolin to Aerococcus viridans as well as to a more defined artificial target, i.e. acetylated bovine serum albumin. A strict dependence for calcium ions and inhibition at high NaCl concentration was found. The binding to acetylated bovine serum albumin was inhibited by acetylsalicylic acid and sodium acetate as well as by N-acetylated glucosamine and galactosamine (GlcNAc and GalNAc) and glycine (GlyNAc). The binding to A. viridans was sensitive to the same compounds, but, importantly, higher concentrations were needed for inhibition. N-Acetylated cysteine was also inhibitory, but this inhibition was parallel with reduction in the oligomerization of H-ficolin and thus represents structural changes of the molecule. Based on our findings, we developed a procedure for the purification of H-ficolin from serum, involving PEG precipitation, affinity chromatography on Sepharose derivatized with acetylated serum albumin, ion exchange chromatography, and gel permeation chromatography. The purified H-ficolin was observed to elute at 700 kDa, similar to what we find for H-ficolin in whole serum. MASP-2 was co-purified with H-ficolin, and the purified H-ficolin·MASP-2 complex could activate complement as measured by cleavage of complement factor C4. This study extends our knowledge of the specificity of this pattern recognition molecule, and the purified product will enable further studies.

Separation of inorganic anions using a series of sulfobetaine exchangers.

A set of five new sulfobetaine exchangers with inner quaternary amines and outer sulfonic acids have been prepared. A series of zwitterionic precursors was attached to highly porous divinylbenzene polymer using a grafting reaction, which allows a flexible adjustment of the degree of functionalisation. The resulting materials have identical spacers to the polymeric backbone and differ only in chain length between the charged functional groups. Capacities of the stationary phases were analysed by two different methods based on elemental analysis and the results obtained were found to correlate. The application of combustion elemental analysis proved an identical molar content of sulfur and nitrogen. The distance between the charged functional groups is varied from one to five methylene groups for a better understanding of the retention behaviour of inorganic anions on zwitterionic stationary phases. Inorganic anions were separated using sodium acetate eluents with varying ionic strength and pH and the behaviour of all columns has been compared to each other and to ZIC-HILIC and ZIC-pHILIC columns from Merck SeQuant. The exchangers with two and five methylene groups between the charges showed the highest retention factors. Polarity and accessibility of the anion exchange sites are dependent on the distance between the charged groups and the flexibility of the chains. These properties have a strong influence on anion separations. The exchanger with two methylene groups between the charged functional groups showed the biggest difference as compared to the commercially available ZIC-HILIC and ZIC-pHILIC exchangers.

A reliable method to concentrate circulating DNA.

Concentration of circulating DNA probes is required to increase the amount of DNA involved in subsequent study (by polymerase chain reaction, sequencing, and microarray). This work was dedicated to the comparison of five different methods used for concentration of DNA circulating in blood. Precipitation of circulating DNA with acetone in the presence of triethylamine provides minimal DNA loss, high reproducibility, and at least three times higher DNA yield in comparison with the standard ethanol protocol.

In situ synthesis of biomolecule encapsulated gold-cross-linked poly(ethylene glycol) nanocomposite as biosensing platform: a model study.

In situ synthesis of poly(ethylene glycol) (PEG) hydrogels containing gold nanoparticles (AuNPs) and glucose oxidase (GOx) enzyme by photo-induced electron transfer process was reported here and applied in electrochemical glucose biosensing as the model system. Newly designed bionanocomposite matrix by simple one-step fabrication offered a good contact between the active site of the enzyme and AuNPs inside the network that caused the promotion in the electron transfer properties that was evidenced by cyclic voltammetry as well as higher amperometric biosensing responses in comparing with response signals obtained from the matrix without AuNPs. As well as some parameters important in the optimization studies such as optimum pH, enzyme loading and AuNP amount, the analytical characteristics of the biosensor (AuNP/GOx) were examined by the monitoring of chronoamperometric response due to the oxygen consumption through the enzymatic reaction at -0.7 V under optimized conditions at sodium acetate buffer (50 mM, pH 4.0) and the linear graph was obtained in the range of 0.1-1.0 mM glucose. The detection limit (LOD) of the biosensor was calculated as 0.06 mM by using the signal to noise ratio of 3. Moreover, the presence of AuNPs was visualized by TEM. Finally, the biosensor was applied for glucose analysis for some beverages and obtained data were compared with HPLC as the reference method to test the possible matrix effect due to the nature of the samples.

A 17beta-estradiol-utilizing bacterium, Sphingomonas strain KC8: part I - characterization and abundance in wastewater treatment plants.

A 17beta-estradiol-utilizing bacterium, Sphingomonas strain KC8, was characterized in terms of its utilization kinetics toward 17beta-estradiol, estrone, and testosterone. The maximum specific substrate utilization rates (q(m)) are 0.37, 0.50, and 0.17 mg-substrate/mg-protein/day for 17beta-estradiol, estrone, and testosterone, respectively. The half-velocity constants (K(s)) are 1.9 mg/L for 17beta-estradiol, 2.7 mg/L for estrone, and 2.4 mg/L for testosterone. Strain KC8 can grow on testosterone, glucose, sodium succinate, and sodium acetate, but not on phenol. Also, strain KC8 cannot degrade two common wastewater micropollutants, bisphenol A (a plasticizer) and triclosan (an antimicrobial agent). Unlike Novosphingobium sp. ARI-1 (a known estrogen-degrader) that would lose its degradation ability toward estrone after growing on a nutrient-rich estrogen-free medium for 7 days, strain KC8 was still able to degrade both 17beta-estradiol and estrone after growing on the same medium for 15 days. Strains KC8 and ARI-1 were molecularly detected in activated sludge of municipal wastewater treatment plants (WWTPs) operating under solid retention times of 2-30 days. The concentrations of strain KC8 were 2-3 orders higher than those of strain ARI-1 in the WWTPs, suggesting that strain KC8 is ubiquitous in WWTPs and might play an important role in estrogen removal.