LCA of recycling aluminium incineration bottom ash, dross and shavings in a rotary furnace and environmental benefits of salt-slag valorisation.

Recycling aluminium in a rotary furnace with salt-fluxes allows recovering valuable alloys from hard-to-recycle waste/side-streams such as packaging, dross and incinerator bottom ash. However, this recycling route generates large amounts of salt-slag/salt-cake hazardous wastes which can pose critical environmental risks if landfilled. To tackle this issue, the metallurgical industry has developed processes to valorise the salt-slag residues into recyclable salts and aluminium concentrates, while producing by-products such as ammonium sulphate and non-metallic compounds (NMCs), with applications in the construction or chemical industries. This study aims to assess through LCA the environmental impacts of recycling aluminium in rotary furnaces for both salt-slag management routes: valorisation or landfill. It was found that this recycling process brings forth considerable net environmental profits, which increase for all the considered impact categories if the salt-slag is valorised. The main benefits arise from the production of secondary cast aluminium alloys, which is not unexpected due to the high energy intensity of aluminium primary production. However, the LCA results also identify other hotspots which play a significant role, and which should be considered for the optimisation of the process based on its environmental performance, such as the production of by-products, the consumption of energy/fuels and the avoidance of landfilling waste. Additionally, the assessment shows that the indicators for mineral resource scarcity, human carcinogenic toxicity and terrestrial ecotoxicity are particularly benefited by the salt-slag valorisation. Finally, a sensitivity analysis illustrates the criticality of the metal yield assumptions when calculating the global warming potential of aluminium recycling routes.

Evaluate the aluminum concentrations in whey milk samples of cows from different areas using deep eutectic solvent-based ultrasound-assisted dispersive liquid-liquid microextraction method.

This study investigates the contamination of cow milk with aluminum (Al) and its potential health implications, particularly for children. Cow milk samples were collected from both nonexposed and exposed areas in Sindh, based on the source of livestock drinking water (fresh canals and groundwater). An environmental friendly deep eutectic solvent (DES) was used with ultrasonic-assisted dispersive liquid-liquid microextraction (UDLLµE) to enrich trace amounts of Al in whey milk and water samples. The enriched samples were then analyzed using inductively coupled plasma optical emission spectrometry. Certified reference materials were employed to validate the methodology, and the experimental results exhibited acceptable conformity. The DES-based dispersive liquid-liquid microextraction method was environmental friendly, devoid of acids and oxidizing agents, and used safe and inexpensive components for routine trace metal analysis in diverse samples. The resulting data revealed that Al in whey milk samples was observed in the range of 31-45 %, corresponding to (160-270) µg L-1 and (700-1035) µg L-1 in nonexposed and exposed whole cow milk samples, respectively. Additionally, it was observed that milk boiling in Al utensil for 10-20 min enhanced the Al levels from 3 to 8% of its total contents in milk samples.

Development of a water-soluble fluorescent Al3+ probe based on phenylsulfonyl-2-pyrone in biological systems.

BACKGROUND: Al exists naturally in the environment and is an important component in acidic soils, which harm almost all plants. Furthermore, Al is widely used in food additives, cosmetics, and medicines, resulting in living organisms ingesting traces of Al orally or dermally every day. Accordingly, Al accumulates in the body, which can cause negative bioeffects and diseases, and this concern is gaining increasing attention. Therefore, to detect and track Al in the environment and in living organisms, the development of novel Al-selective probes that are water-soluble and exhibit fluorescence at long wavelengths is necessary. RESULTS: In this study, an Al3+-selective fluorescent probe PSP based on a novel pyrone molecule was synthesized and characterized to detect and track Al in biological systems. PSP exhibited fluorescence enhancement at 580 nm in the presence of Al3+ in aqueous media. Binding analysis using Job's plot and structural analysis using 1H NMR showed that PSP formed a 1:1 complex with Al3+ at the two carbonyl groups of the dimethyl malonate of the pyrone ring. Upon testing in biological systems, PSP showed good cell membrane permeability, detected intracellular Al3+ in human breast cancer cells (MDA-MB-231), and successfully imaged accumulated Al3+ in Microcystis aeruginosa and the larvae of Rheocricotopus species. SIGNIFICANCE: The novel Al3+-selective fluorescent probe PSP is highly effective and is expected to aid in elucidating the role of Al3+ in the environment and living organisms.

New materials-based on gelatin coordinated with zirconium or aluminum for ecological retanning.

Ecological retanning agent is an effective way to solve the pollution source of leather manufacturing industry. In this study, the gelatin from chrome-containing leather shavings in the leather industry was used to realize sustainable leather post-tanning. The gelatin hydrolysate (GH) coordinated with Zr4+ or Al3+ to prepare eco-friendly retanning agents GH-Zr and GH-Al. The successful coordination between GH and metal ions was characterized by FTIR and XPS. The retanning agents were characterized by FTIR curve-fitting and circular dichroism spectroscopy. The results showed that the conformation of the secondary structure of the polypeptide became ordered and stable after coordinating with the metal ions. The particle size and weight average molecular weight of the retanning agents were ~1700 nm and ~2100, respectively, measured by nanoparticle size analyzer and gel permeation chromatography (GPC). The retanning agents were applied to retanning of chrome tanned leather and glutaraldehyde tanned leather. The abundant free amino from retanning agents can consume the free formaldehyde. Meanwhile, retanning agents can effectively improve the multiple binding sites, resulting in favorable thickening rate (>110 %) and excellent dye and fatliquor absorption rate with ~99.91 % and ~93.18 %. Thus, this strategy can provide a viable choice for solid leather waste and sustainable development of the leather industry.

Interstitial pulmonary disease and aluminum trihydrate exposure: A single case report and detailed workplace analysis.

Exposure to aluminum compounds is clearly associated with pulmonary function decrements, and several animal models document possible mechanisms of aluminum- compound-induced pulmonary toxicity. Nevertheless, disagreements remain about the precise mechanism by which exposures lead to damage. We present a strong case for attributing a case of interstitial pulmonary disease to occupational exposure to aluminum trihydrate. This report follows a 2014 publication of another case of interstitial pulmonary disease following a similar exposure. Our patient eventually underwent double lung transplantation nearly 5 years postexposure. Detailed pulmonary particulate elemental analysis suggested that aluminum metal, including aluminum trihydrate, was the most likely cause. A detailed assessment of the worker's relevant occupational exposures accompanies this case report.

The role of plants in ironstone evolution: iron and aluminium cycling in the rhizosphere.

The Carajás plateaus in Brazil host endemic epilithic vegetation ("campo rupestre") on top of ironstone duricrusts, known as canga. This capping rock is primarily composed of iron(III) oxide minerals and forms a physically resistant horizon. Field observations reveal an intimate interaction between canga's surface and two native sedges (Rhynchospora barbata and Bulbostylis cangae). These observations suggest that certain plants contribute to the biogeochemical cycling of iron. Iron dissolution features at the root-rock interface were characterised using synchrotron-based techniques, Raman spectroscopy and scanning electron microscopy. These microscale characterisations indicate that iron is preferentially leached in the rhizosphere, enriching the comparatively insoluble aluminium around root channels. Oxalic acid and other exudates were detected in active root channels, signifying ligand-controlled iron oxide dissolution, likely driven by the plants' requirements for goethite-associated nutrients such as phosphorus. The excess iron not uptaken by the plant can reprecipitate in and around roots, line root channels and cement detrital fragments in the soil crust at the base of the plants. The reprecipitation of iron is significant as it provides a continuously forming cement, which makes canga horizons a 'self-healing' cover and contributes to them being the world's most stable continuously exposed land surfaces. Aluminium hydroxide precipitates ("gibbsite cutans") were also detected, coating some of the root cavities, often in alternating layers with goethite. This alternating pattern may correspond with oscillating oxygen concentrations in the rhizosphere. Microbial lineages known to contain iron-reducing bacteria were identified in the sedge rhizospheric microbiome and likely contribute to the reductive dissolution of iron(III) oxides within canga. Drying or percolation of oxygenated water to these anaerobic niches have led to iron mineralisation of biofilms, detected in many root channels. This study sheds light on plants' direct and indirect involvement in canga evolution, with possible implications for revegetation and surface restoration of iron mine sites.

Aluminum Concentrations in Breast Milk Samples Obtained from Breastfeeding Women from a Resource-Limited Country: A Study of the Predicting Factors.

This study assessed aluminum concentrations in breast milk samples obtained from breastfeeding women in resource-limited countries, estimated daily intake of aluminum by breastfed infants, and identified predictors of higher breast milk aluminum concentrations. A descriptive analytical approach was used in this multicenter study. Breastfeeding women were recruited from different maternity health clinics in Palestine. Aluminum concentrations in 246 breast milk samples were determined using an inductively coupled plasma-mass spectrometric method. The mean breast milk aluminum concentration was 2.1 ± 1.5 mg/L. The mean estimated daily intake of aluminum by infants was 0.37 ± 0.26 mg/kg body weight/day. Multiple linear regression showed that breast milk aluminum concentrations were predicted by living in urban areas, closer to industrial areas, waste disposals, frequent use of deodorants, and less frequent use of vitamins. Breast milk aluminum levels among Palestinian breastfeeding women were comparable to those previously determined in occupationally unexposed women.

How the physicochemical substrate properties can influence the deposition of blood and seminal deposits.

A comprehensive investigation into the impact of the physical and chemical variables of a substrate on the deposition was conducted to aid in the estimation of the subsequent transfer probabilities of blood and semen. The study focussed on surface roughness, topography, surface free energy (SFE), wettability, and the capacity for protein adsorption. Conjointly, evaluations of the physical and chemical characteristics of blood and seminal deposits were conducted, to assess the fluid dynamics of these non-Newtonian fluids and their adhesion potential to aluminium and polypropylene. A linear range of surface roughness parameters (0.5 - 3.5 µm) were assessed for their impact on the deposit deposition spread and adhesion height, to gather insight into the change in fluid dynamics of non-Newtonian fluids. Blood has shown to produce a uniform adhesion coverage on aluminium across all roughness categories while blood deposited on polypropylene exhibited a strong hydrophobic response from a surface roughness of 2.0 µm and beyond. Interestingly, the deposition height of blood resulted in near identical values, whether deposited onto the hydrophobic polypropylene or the hydrophilic aluminium substrate, illustrating the potential influence of a heightened fibrinogen adsorption effect. Semen deposited on aluminium resulted in concentrated localised deposition regions after reaching a surface roughness of 2.0 µm, highlighting the development of crystal formations afforded by the sodium ion concentration in the seminal fluid. The semen deposited on polypropylene conformed to the substrate contours producing a deposition film that was smoother than the substrate itself, underlining the effects of thixotropic fluid dynamics. Variables identified here establish the complexity observed for non-Newtonian fluids, and the effect protein adsorption may have on the deposition behaviour of blood and seminal deposits and inform questions in relation to the adhesion strength of said deposits and their ability to dislodge (becoming detached upon the application of an external force) from the substrate surface during a potential transfer event.

A comprehensive investigation to the fate of phosphorus in full-scale wastewater treatment plants using aluminum salts for enhanced phosphorus removal.

This study investigated the fate of phosphorus (P) in 8 full-scale municipal wastewater treatment plants (WWTPs) in Shanghai, China, in which both biological nutrient removal and aluminum-based chemical phosphorus removal were used. The results showed that 83.8-98.9 % P was transferred to the sludge in the 8 WWTPs by both chemical and biological reactions. P speciation analysis indicated that chemical P precipitates accounted for 84.3 % in the activated sludge, of which crystalline AlPO4 and amorphous iron­phosphorus compounds (FePs) were the main components. Sludge with more water-soluble and weakly adsorbed P was generated in the anaerobic-anoxic-oxic (A/A/O) process than in other processes. Among the 8 WWTPs, the one with the largest flow rate and relatively short sludge retention time (SRT) had the best potential to release P from all types of sludge. The recovery potential of P from thickened sludge can be improved by separately thickening the sludge produced in the high-efficiency sedimentation tank or feeding it into the dewatering process directly. Different P removal chemicals and dosing points changed the amount of chemical precipitate formed but had little effect on the composition of P accumulating organisms (PAOs) at the genus level. Although aluminum-based coagulants were applied in the investigated WWTPs, Fe in wastewater had the most positive effect on the proliferation of PAOs. The synthesis of polyphosphate was also related to the metabolism of PAOs as it affected transmembrane inorganic phosphate (Pi) transport and polyhydroxybutyrate (PHB) synthesis. The in-depth understanding of the fate of P is beneficial to improve P recovery efficiency in WWTPs.

Analysis of the coupled flows of aluminum and copper in household air conditioning system.

The global "copper-poor and aluminum-rich" situation has made the possibility of "copper saving with aluminum" an important topic. This study established a framework for analyzing multiple substances' coupled flows at the product level based on material flow analysis (MFA), and took the household air conditioning system of the Chinese mainland in 2020 as an example to characterize the coupled flows of aluminum and copper. The results showed that the system consumed 0.69 million tons of aluminum and 2.10 million tons of copper, and discharged 0.17 million tons of aluminum and 0.43 million tons of copper to the environment cumulatively to achieve 13.2 million terajoules of final heat exchanged and serve 1.24 billion square meters during lifetime in mainland China alone, secondary aluminum and copper accounted for only 22.61% and 24.83% of the total consumption, and the in-use stocks increased by 0.19 million tons of aluminum and 0.70 million tons of copper. The external dependency of copper ore was 92.83%, which was significantly higher than the 44.29% of bauxite. The comprehensive utilization efficiency of copper reached 77.88%, which was slightly higher than the 70.80% of aluminum. The conclusion indicates that under the premise of meeting use requirements, promoting "replacing copper with aluminum" can improve the stability and safety of China's material supply chain, but there is a need to further boost the production efficiency of aluminum in primary production.

Probabilistic human health risk assessment and Sobol sensitivity reveal the major health risk parameters of aluminum in drinking water in Shiraz, Iran.

Overuse of aluminum salts (a.k.a., alum) in coagulation and flocculation processes in water treatment raises concerns about increased levels of aluminum (Al) in drinking water. In this study, we present a probabilistic human health risk assessment (HRA) for non-cancerogenic risks, with Sobol sensitivity analysis, to vet the concern of increased health risk from Al in drinking water in Shiraz, Iran, for children, adolescents, and adults. The results show that the concentration of Al in the drinking water in Shiraz varies significantly between winter and summer seasons and varies considerably spatially across the city irrespective of the season. However, all concentrations are below the guideline concentration. The HRA results show that the highest health risk is for children in summer, and the lowest is for adolescents and adults during winter, with generally higher health risks for younger age groups. However, Monte Carlo results for all age groups suggest no adverse health effects due to Al exposure. The sensitivity analysis shows that the sensitive parameters vary across age groups. For example, the Al concentration and ingestion rate pose the most risk for adolescent and adult groups, and children group, respectively. More importantly, the interaction of Al concentration with ingestion rate and body weight is the controlling parameters for evaluating HRA rather than Al concentration alone. We conclude that while the HRA of Al in Shiraz drinking water did not indicate significant health risk, regular monitoring and optimal operation of the coagulation and flocculation processes are essential.

Fluorescent Turn-On Anthracene-Based Aluminum(III) Sensor for a Therapeutic Study in Alzheimer's Disease Model of Drosophila.

A new anthracene-based probe (E)-N'-(1-(anthracen-9-yl)ethylidene)-2-hydroxybenzohydrazide (AHB) has been efficiently synthesized and characterized by various spectroscopic methods. It exhibits extremely selective and sensitive fluorometric sensing of Al3+ ions with a large enhancement in the fluorescent intensity due to the restricted photoinduced electron transfer (PET) mechanism with a chelation-enhanced fluorescence (CHEF) effect. The AHB-Al3+ complex shows a remarkably low limit of detection at 0.498 nM. The binding mechanism has been proposed based on Job's plot, 1H NMR titration, Fourier transform infrared (FT-IR), high-resolution mass spectrometry (HRMS), and density functional theory (DFT) studies. The chemosensor is reusable and reversible in the presence of ctDNA. The practical usability of the fluorosensor has been established by a test strip kit. Further, the therapeutic potential of AHB against Al3+ ion-induced tau protein toxicity has been tested in the eye of Alzheimer's disease (AD) model of Drosophila via metal chelation therapy. AHB shows great therapeutic potential with 53.3% rescue in the eye phenotype. The in vivo interaction study of AHB with Al3+ in the gut tissue of Drosophila confirms its sensing efficiency in the biological environment. A detailed comparison table included evaluates the effectiveness of AHB.

Metal-organic frameworks (MOFs) composite of polyaniline-CNT@aluminum succinate for non-enzymatic nitrite sensor.

Nitrite has been linked to a variety of health issues, as well as cancer and oxygen deficiency when its allowable limit is exceeded. Nitrite monitoring and detection are required due to the negative effects on public health. Metal-organic frameworks (MOFs)-based nanomaterials/composites have recently been shown to have the potential for various biological and medical applications like sensing, imaging, and drug delivery. As a result, this research creates an efficient electrochemical sensor by incorporating MOFs into polyaniline (PANI)/carbon nanotube (CNT) cast on the GCE. In situ oxidative polymerization was used to construct an aluminum succinate MOF (Al-Succin)-incorporated CNT/PANI nanocomposite (PANI/CNT@Al-Succin) and well characterized by various characterization techniques, namely, field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric-differential thermal analysis (TGA-DTA), cyclic voltammetry (CV), and four probes to measure DC electrical conductivity. Cyclic voltammetry and linear sweep voltammetry techniques were employed to detect nitrite on the surface of PANI/CNT@Al-Succin-modified glassy carbon electrode (GCE). PANI/CNT@Al-Succin-modified GCE demonstrated good current response and electrocatalytic property towards nitrite compared to bare GCE. The newly synthesized electrode exhibited a high electrocatalytic activity towards nitrite oxidation and showed a linear response ranging from 5.7 to 74.1 µM for CV and 8.55-92.62 µM for LSV. The obtained LOD values for CV (1.16 µM) and LSV (0.08 µM) were significantly below the WHO-defined acceptable nitrite limit in drinking water. Results of recovery studies for real samples of apple juice, orange juice, and bottled water were 98.92%, 99.38%, and 99.90%, respectively. These values show practical usability of PANI/CNT@Al-Succin in real samples.

Effect of aluminum accumulation on bone and cardiovascular risk in the current era.

BACKGROUND: The prevalence of aluminum (Al) intoxication has declined over the past 3 decades. However, different groups still report on the diagnosis of Al in bone. Prolonged and low-intensity exposures to Al may not be captured by serum Al measurements, preventing its proper diagnosis. We hypothesize that bone Al accumulation may be related to bone and cardiovascular events in the current Era. AIMS: To detect the diagnosis of bone Al accumulation; to explore bone and cardiovascular consequences of Al accumulation. METHODS: This is a sub-analysis of The Brazilian Registry of Bone Biopsy, a prospective, multicentre cohort, with a mean follow-up of 3.4 years, including patients with CKD undergoing bone biopsy; bone fracture and major cardiovascular events (MACE) were adjudicated; Al accumulation was identified by solochrome-azurine staining; history of previous Al accumulation was registered based on information provided by the nephrologist who performed the bone biopsy; bone histomorphometry parameters, clinical data, and general biochemistry were registered. RESULTS: 275 individuals were considered; 96 (35%) patients have diagnosed with bone Al accumulation and were younger [50 (41-56) vs. 55 (43-61) years; p = 0.026], had lower body mass index [23.5 (21.6-25.5) vs. 24.3 (22.1-27.8) kg/m2; p = 0.017], higher dialysis vintage [108 (48-183) vs. 71 (28-132) months; p = 0.002], presented pruritus [23 (24%) vs. 20 (11%); p = 0.005], tendon rupture [7 (7%) vs. 3 (2%); p = 0.03) and bone pain [2 (0-3) vs. 0 (0-3) units; p = 0.02]. Logistic regression reveals that prior bone Al accumulation [OR: 4.517 (CI: 1.176-17.353); p = 0.03] and dialysis vintage [OR: 1.003 (CI: 1.000-1.007); p = 0.046] as independent determinants of bone Al accumulation; minor perturbations in dynamic bone parameters and no differences in bone fractures rate were noted; MACE was more prevalent in patients with bone Al accumulation [21 (34%) vs. 23 (18%) events; p = 0.016]. Cox regression shows the actual/prior diagnosis of bone Al accumulation and diabetes mellitus as independent predictors for MACE: [HR = 3.129 (CI: 1.439-6.804; p = 0.004) and HR = 2.785 (CI: 1.120-6.928; p = 0.028]. CONCLUSIONS: An elevated proportion of patients have bone Al accumulation, associated with a greater prevalence of bone pain, tendon rupture, and pruritus; bone Al accumulation was associated with minor perturbations in renal osteodystrophy; actual/prior diagnosis of bone Al accumulation and diabetes mellitus were independent predictors for MACE.

Chemically modified flubendazole carbon electrochemical sensor for aluminum determination in food stuff, Multivitamin syrup and real water samples supported by DFT calculations, IR and morphological tools.

Aluminum is a key component in nearly nourishment stuffs and medications. It is also found in treated drinking water in the form of reactive species, and aluminum salts are commonly utilized as flocculants in water treatment. Meanwhile, it was not thought to be a dangerous metal for people, but research showed a possible link with Alzheimer's disease, breast cancer, autism, and aluminum. Controlling the amount of aluminum in food processing, agriculture, and drinking water is crucial, thus newly synthesized Al(III) ion selective electrode based on innocuous reagent, flubendazole drug, has been developed. The electrode displayed Nernstian slopes of 20.11 0.47 mV decade-1 at 25 ± 1 °C, covering a wide concentration range of Al(III) from 1 × 10-7 to 1 × 10-1 mol L-1. The response mechanism is studied using IR, computational calculations, morphological tools. The developed sensor has been utilized to accurately measure Al(III) ions in genuine water samples, multivitamin syrup, and food stuff.

Aluminum Nanoparticles Affect Human Platelet Function In Vitro.

Endoprostheses are prone to tribological wear and biological processes that lead to the release of particles, including aluminum nanoparticles (Al NPs). Those particles can diffuse into circulation. However, the toxic effects of NPs on platelets have not been comprehensively analyzed. The aim of our work was to investigate the impact of Al NPs on human platelet function using a novel quartz crystal microbalance with dissipation (QCM-D) methodology. Moreover, a suite of assays, including light transmission aggregometry, flow cytometry, optical microscopy and transmission electron microscopy, were utilized. All Al NPs caused a significant increase in dissipation (D) and frequency (F), indicating platelet aggregation even at the lowest tested concentration (0.5 µg/mL), except for the largest (80 nm) Al NPs. A size-dependent effect on platelet aggregation was observed for the 5-20 nm NPs and the 30-50 nm NPs, with the larger Al NPs causing smaller increases in D and F; however, this was not observed for the 20-30 nm NPs. In conclusion, our study showed that small (5-50 nm) Al NPs caused platelet aggregation, and larger (80 nm) caused a bridging-penetrating effect in entering platelets, resulting in the formation of heterologous platelet-Al NPs structures. Therefore, physicians should consider monitoring NP serum levels and platelet activation indices in patients with orthopedic implants.

Woody species distribution across a savanna-dry forest soil gradient in the Brazilian Cerrado / Distribuição de espécies arbóreas em gradiente de solo savana-floresta seca no Cerrado brasileiro

Although richness and distribution of woody species in the Cerrado physiognomies have been extensively studied, the shifts of woody species from savanna physiognomies to dry forests have not yet been addressed. Here, we investigate the effect of soil physical-chemical traits on the woody species turnover between adjacent cerrado stricto sensu and dry forest physiognomies. Woody species were surveyed, and soil and topographic variables measured, in 30 10×40 m plots systematically distributed, with 15 plots in each physiognomy. We found a spatially structured distribution of woody species, and differences of soil traits between cerrado stricto sensu and dry forest areas, mainly related to the aluminum saturation, base saturation, and available phosphorus. Aluminum saturation increased toward the savanna area, while base saturation increased toward the dry forest. Most woody species predominated in one physiognomy, such as Callisthene major in the cerrado stricto sensu and Anadenanthera colubrina in the dry forest. Only 20% of the species were widely distributed across both physiognomies or, not often, restricted to the intermediary values of the soil gradient. General results indicate that contrasting soil traits between cerrado stricto sensu and dry forest produce a strongly spatially organized and sharp transition in terms of species distribution between these physiognomies.

Embora a distribuição e a riqueza em espécies arbóreas nas fitofisionomias do Cerrado venham sendo bastante estudadas, a transição entre savanas e florestas deciduais ainda não foi abordada. Investigamos o efeito de características físico-químicas do solo sobre a distribuição de espécies arbóreas em região de contato entre cerrado sentido restrito e floresta estacional decidual (FED). As espécies arbóreas foram amostradas sistematicamente, e variáveis de topografia e características do solo foram medidas em 30 parcelas de 10×40 m, sendo 15 parcelas em cada fisionomia. A distribuição das espécies arbóreas foi espacialmente estruturada, e as características do solo diferiram entre as áreas de cerrado sentido restrito e FED, principalmente relacionadas à saturação de alumínio, saturação de bases e teores de fósforo. A saturação de alumínio aumentou em direção ao cerrado sentido restrito, enquanto a saturação de bases aumentou em direção à FED. A maioria das espécies arbóreas predominou em uma das fisionomias, como Callisthene major em cerrado sentido restrito e Anadenanthera colubrina em FED. Apenas 20% das espécies foram amplamente distribuídas em ambas as fisionomias ou, em poucos casos, restritas aos valores intermediários do gradiente de solo. Os resultados indicam um forte contraste de características do solo entre o cerrado sentido restrito e a FED, assim como uma transição acentuada e espacialmente organizada quanto à distribuição de espécies arbóreas.

Potential Health Risk of Aluminum in Four Camellia sinensis Cultivars and Its Content as a Function of Leaf Position.

Tea plants can accumulate aluminum (Al) in their leaves to a greater extent than most other edible plants. Few studies, however, address the Al concentration in leaves at different positions, which is important information for tea quality control. Leaves from four different cultivars of Camellia sinensis L. grown in Hawaii were analyzed for Al concentrations at 10 different leaf positions. Each cultivar was harvested in the winter and summer to determine seasonal variations of Al concentrations in the leaves. The results showed that Al concentrations in the winter leaves were an average of 1.2-fold higher than those in the summer leaves, although the seasonal variations were not statistically significant. The total Al concentration of successively lower leaves showed an exponential increase (R2 ≥ 0.900) for all four cultivars in the summer season, whereas those of the winter leaves fit a bi-phase linear regression (R2 ≥ 0.968). The regression of the Al concentrations against the top-5 leaf positions in the winter season fit one linear regression, while that against leaf positions 6-11 fit another linear regression. The average Al concentrations between the third leaf and the shoot plus first two leaves increased approximately 2.7-fold and 1.9-fold for all cultivars in the winter and summer months, respectively. The Al concentrations in the rest of the leaves increased approximately 1.5-fold in a sequential order. The target hazard quotient being between 1.69 × 10-2 and 5.06 × 10-1 in the tea leaf samples of the four cultivars in Hawaii were all less than 1, suggesting negligible health risks for consumers. The results of this study may be useful for directing harvest practices and estimating tea quality.

Hair Toxic Trace Elements of Residents across the Caspian Oil and Gas Region of Kazakhstan: Cross-Sectional Study.

This study aimed to assess the relationship between the content of toxic trace elements, such as aluminum (Al), arsenic (As), beryllium (Be), cadmium (Cd), mercury (Hg), and lead (Pb), in the hair of the adult population of western Kazakhstan and the distance of their residence from oil and gas fields. The cross-sectional study included 850 adults aged 18-60 years. Inductively coupled plasma mass spectrometry was used to measure the level of Al, As, Be, Cd, Hg, and Pb in hair. The relationship between the concentration of toxic trace elements in the hair and the distance from oil and gas fields was assessed in three groups (<16 km, 16-110 km, and >110 km), using multiple linear regression analysis. The highest concentration of Hg = 0.338 µg/g was determined in the group living near oil and gas fields (0-16 km), whereas the lowest concentration of Al = 3.127 µg/g and As = 0.028 µg/g was determined in participants living at a long distance (more than 110 km) (p < 0.001). The concentration of Al (-0.126 (CI: -0.174; -0.077)), Hg (-0.065 (CI: -0.129; -0.001)), and Pb (0.111 (CI: 0.045; 0.177)) is associated with the distance to oil and gas fields. The obtained data indicate a change in the toxic trace element content in the hair of residents in the Caspian region of western Kazakhstan, a change that is most pronounced in residents living in the zone of oil and gas pollution. The distance to the oil and gas fields affects the content of toxic elements in scalp hair. In particular, the concentration of Al and Hg is associated with a decrease in the distance to oil and gas fields, while the concentration of Pb is associated with an increase in the distance to these fields. The lowest content of Al and As was determined in the hair of study participants living in the most remote areas (more than 110 km from oil and gas fields). Our results demonstrate the need for the biomonitoring of toxic elements to determine long-term temporal trends in the impact of chemicals on public health in western Kazakhstan.