Comparison between model-based RSA and an AI-based CT-RSA: an accuracy study of 30 patients.

BACKGROUND AND PURPOSE: Radiostereometry (RSA) is the current gold standard for evaluating early implant migration. CT-based migration analysis is a promising method, with fewer handling requirements compared with RSA and no need for implanted bone-markers. We aimed to evaluate agreement between a new artificial intelligence (AI)-based CT-RSA and model-based RSA (MBRSA) in measuring migration of cup and stem in total hip arthroplasty (THA). PATIENTS AND METHODS: 30 patients with THA for primary osteoarthritis (OA) were included. RSA examinations were performed on the first postoperative day, and at 2 weeks, 3 months, 1, 2, and 5 years after surgery. A low-dose CT scan was done at 2 weeks and 5 years. The agreement between the migration results obtained from MBRSA and AI-based CT-RSA was assessed using Bland-Altman plots. RESULTS: Stem migration (y-translation) between 2 weeks and 5 years, for the primary outcome measure, was -0.18 (95% confidence interval [CI] -0.31 to -0.05) mm with MBRSA and -0.36 (CI -0.53 to -0.19) mm with AI-based CT-RSA. Corresponding proximal migration of the cup (y-translation) was 0.06 (CI 0.02-0.09) mm and 0.02 (CI -0.01 to 0.05) mm, respectively. The mean difference for all stem and cup comparisons was within the range of MBRSA precision. The AI-based CT-RSA showed no intra- or interobserver variability. CONCLUSION: We found good agreement between the AI-based CT-RSA and MBRSA in measuring postoperative implant migration. AI-based CT-RSA ensures user independence and delivers consistent results.

No difference in component migration at five years between the cemented cruciate-retaining ATTUNE and PFC-Sigma knee prosthesis: an update of a randomized clinical radiostereometry trial.

Aims: Conflicting clinical results are reported for the ATTUNE Total Knee Arthroplasty (TKA). This randomized controlled trial (RCT) evaluated five-year follow-up results comparing cemented ATTUNE and PFC-Sigma cruciate retaining TKAs, analyzing component migration as measured by radiostereometric analysis (RSA), clinical outcomes, patient-reported outcome measures (PROMs), and radiological outcomes. Methods: A total of 74 primary TKAs were included in this single-blind RCT. RSA examinations were performed, and PROMs and clinical outcomes were collected immediate postoperatively, and at three, six, 12, 24, and 60 months' follow-up. Radiolucent lines (RLLs) were measured in standard anteroposterior radiographs at six weeks, and 12 and 60 months postoperatively. Results: At five-year follow-up, RSA data from 61 patients were available and the mean maximum total point motion (MTPM) of the femoral components were: ATTUNE: 0.96 mm (95% confidence interval (CI) 0.79 to 1.14) and PFC-Sigma 1.37 mm (95% CI 1.18 to 1.59) (p < 0.001). The PFC-Sigma femoral component migrated more in the first postoperative year, but stabilized thereafter. MPTM of the tibial components were comparable at five-year follow-up: ATTUNE 1.12 mm (95% CI 0.95 to 1.31) and PFC-Sigma 1.25 mm (95% CI 1.07 to 1.44) (p = 0.438). RLL at the medial tibial implant-cement interface remained more prevalent for the ATTUNE at five-year follow-up compared to the PFC-Sigma (20% vs 3%). RLL did not progress over time, and varied between patients at different timepoints for both TKA systems. Clinical outcomes and PROMs improved compared with preoperative scores, and were not different between groups. Conclusion: MTPM migration at five-year follow-up of the femoral and tibial component of the ATTUNE were similar and as low as that of the PFC-Sigma. MTPM migration of both knee implants did not significantly change from one year post-surgery, indicating stable fixation. Long-term ATTUNE performance may be expected to be comparable to the clinically well-performing PFC-Sigma. We have not found evidence of increased tibial component migration as measured by RSA to support concerns about cement debonding and a higher risk of aseptic loosening with the ATTUNE TKA.

Continued Stabilization of a Cementless 3D-Printed Total Knee Arthroplasty: Five-Year Results of a Randomized Controlled Trial Using Radiostereometric Analysis.

BACKGROUND: Three-dimensional (3D) printing of highly porous orthopaedic implants aims to promote better osseointegration, thus preventing aseptic loosening. However, short-term radiostereometric analysis (RSA) after total knee arthroplasty (TKA) has shown higher initial migration of cementless 3D-printed tibial components compared with their cemented counterparts. Therefore, critical evaluation of longer-term tibial component migration is needed. We investigated migration of a cementless 3D-printed and a cemented tibial component with otherwise similar TKA design during 5 years of follow-up, particularly the progression in migration beyond 2 years postoperatively. METHODS: Seventy-two patients were randomized to a cementless 3D-printed Triathlon Tritanium (Stryker) cruciate-retaining (CR) TKA or a cemented Triathlon CR (Stryker) TKA implant. Implant migration was evaluated with RSA at baseline and postoperatively at 3 months and at 1, 2, and 5 years. The maximum total point motion (MTPM) of the tibial component was compared between the groups at 5 years, and progression in migration was assessed between 2 and 5 years. Individual implants were classified as continuously migrating if the MTPM was ≥0.1 mm/year beyond 2 years postoperatively. Clinical scores were evaluated, and a linear mixed-effects model was used to analyze repeated measurements. RESULTS: At 5 years, the mean MTPM was 0.66 mm (95% confidence interval [CI], 0.56 to 0.78 mm) for the cementless group and 0.53 mm (95% CI, 0.43 to 0.64 mm) for the cemented group (p = 0.09). Between 2 and 5 years, there was no progression in mean MTPM for the cementless group (0.02 mm; 95% CI, -0.06 to 0.10 mm) versus 0.07 mm (95% CI, 0.00 to 0.14) for the cemented group. One implant was continuously migrating in the cementless group, and 4 were continuously migrating in the cemented group. The clinical scores were comparable between the groups across the entire time of follow-up. CONCLUSIONS: No significant difference in mean migration was found at 5 years between the cementless and cemented TKA implants. Progression of tibial component migration was present beyond 2 years for the cemented implant, whereas the cementless implant remained stable after initial early migration. LEVEL OF EVIDENCE: Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.

Acceptable migration of a fully cemented rotating hinge-type knee revision system measured in 20 patients with model-based RSA with a 2-year follow-up.

BACKGROUND AND PURPOSE: Rotating hinged knee implants are highly constrained prostheses used in cases in which adequate stability is mandatory. Due to their constraint nature, multidirectional stresses are directed through the bone-cement-implant interface, which might affect fixation and survival. The goal of this study was to assess micromotion of a fully cemented rotating hinged implant using radiostereometric analysis (RSA). PATIENTS AND METHODS: 20 patients requiring a fully cemented rotating hinge-type implant were included. RSA images were taken at baseline, 6 weeks, and 3, 6, 12, and 24 months postoperatively. Micromotion of femoral and tibial components referenced to markers in the bone was assessed with model-based RSA software, using implant CAD models. Total translation (TT), total rotation (TR), and maximal total point motion (MTPM) were calculated (median and range). RESULTS: At 2 years, TTfemur was 0.38 mm (0.15-1.5), TRfemur was 0.71° (0.37-2.2), TTtibia was 0.40 mm (0.08-0.66), TRtibia was 0.53° (0.30-2.4), MTPMfemur was 0.87 mm (0.54-2.8), and MTPMtibia was 0.66 mm (0.29-1.6). Femoral components showed more outliers (> 1 mm, > 1°) compared with tibial components. CONCLUSION: Fixation of this fully cemented rotating hinge-type revision implant seems adequate in the first 2 years after surgery. Femoral components showed more outliers, in contrast to previous RSA studies on condylar revision total knee implants.

Radiostereometric analysis: comparison of radiation dose and precision in digital and computed radiography.

BACKGROUND: Radiostereometric Analysis (RSA) is used to measure fixation of joint prosthesis. This study compared radiation dose and image quality of a digital radiography (DR) RSA system and a computed radiography (CR) RSA system in a clinical setting. METHODS: RSA recordings of 24 hips and shoulders were analyzed. We compared two systems: (1) Arcoma T0 with ST-VI image plates and Profect CR-IR 363 reader to (2) AdoraRSA with CXDI-70C wireless DR detectors in a clinical uniplanar RSA set-up with a ± 20 degrees tube angulation and 35 cm × 43 cm detectors. Effective dose was calculated using dedicated software. Image quality was evaluated using calibration errors as calculated by the RSA software. RESULTS: The mean dose for hips was 0.14 (SD 0.04) mSv in the CR system and 0.05 (SD 0.02) mSv in the DR system. The mean dose for shoulders was 0.16 (SD 0.07) mSv in the CR system and 0.09 (SD 0.03) mSv in the DR system. Radiation dose was 64% (p < 0.001) and 43% (p = 0.03) lower in the DR system compared with the CR system for hip and shoulder RSA, respectively. Image quality was better for the DR system with 60-80% less calibration errors compared to the CR system. CONCLUSION: Owing to highly efficient detectors and added filtration at the x-ray tubes, the DR system considerably reduced radiation dose compared with the CR system without compromising image quality. Based on the findings in this study, we recommend replacing CR RSA systems with DR RSA systems. REGISTRATION: Patients were selected from clinical studies performed on the two systems and approved by the local ethics committee [20060165, M-20100112, M-20070082, M-20110224, and 20070258] and registered with ClinicalTrials.gov [NCT00408096, NCT01289834, NCT00913679, NCT02311179, and NCT00679120].

The anatomical SP-CL stem demonstrates a non-progressing migration pattern in the first year: a low dose CT-based migration study in 20 patients.

Background and purpose - RSA is the gold standard for evaluation of early implant migration. We report the results of a new CT-based method Sectra CT micromotion analysis (CTMA) applied to assess the migration pattern in 20 patients in the 1st year after surgery, both with and without the use of tantalum beads in the bone. The patients had an SP-CL anatomical stem that uses an S-shape, designed to better fit the curvature of the femur. Patients and methods - 20 THA patients (mean age 61 years, 10 female) received SP-CL stems, tantalum markers in the femur, and low-dose CT scans at 1 day, 3 months and 12 months postoperatively. In addition, precision as well as inter- and intra-observer variability of the 12-month migration was measured. Results - The 3-month subsidence was median 0.5 mm (95% CI 0.3-1.0) and the internal rotation 1.8° (CI 0.9-2.6). At 12 months the corresponding values were 0.6 (CI 0.3-1.6) mm and 1.9° (CI 0.8-2.4). Precision was 0.1 to 0.3 mm and 0.1° to 0.4° at 3 and 12 months. Intra- and inter- observer variability yielded R-values averaging 0.96 and 0.98. Interpretation - The migration mainly took place during the 1st 3 months, in line with other uncemented stems. The number of patients with subsidence over 2 mm in the first year (5) might be due to the design of the prosthesis with an anatomical shape. Alternatively, our results might indicate a challenge when choosing the correct size for these new anatomical stems. CTMA provided precise and highly repeatable measurements of migration without the need for tantalum markers.

Dynamic spinal posture and pelvic position analysis using a rasterstereographic device.

BACKGROUND: Until recently, rasterstereographic analysis of the spine was limited to static measurements. However, understanding and evaluating the motion of the spine under dynamic conditions is an important factor in the diagnosis and treatment of spinal pathologies. The aim of this study was to study the spinal posture and pelvic position under dynamic conditions and compare it to static measurements using a dynamic rasterstereographic system. METHODS: A total of 121 healthy volunteers (56 females; 65 males) were included in this observational study. The parameters trunk inclination, trunk imbalance, pelvic obliquity, kyphotic angle, lordotic angle, surface rotation, and lateral deviation were studied and compared under static and dynamic (1, 2, 4, 5 km/h) conditions using the system "Formetric 4D Motion®" (DIERS International GmbH, Germany). RESULTS: Female volunteers had a higher lordotic angle than males under static conditions (p < 0.001). Trunk inclination (5.31° vs. 6.74°), vertebral kyphotic angle (42.53° vs. 39, 59°), and surface rotation (3.35° vs. 3.81°) increase under dynamic conditions (p < 0.001). Trunk inclination and lordotic angle both show significant changes during walking compared to static conditions (p < 0.001). CONCLUSION: The spinal posture differs between females and males during standing and during walking. Rasterstereography is a valuable tool for the dynamic evaluation of spinal posture and pelvic position, which can also be used to quantify motion in the spine and therefore it has the potential to improve the understanding and treatment of spinal pathologies. TRIAL REGISTRATION: Retrospectively registered.

Migration of the uncemented Echo Bi-Metric and Bi-Metric THA stems: a randomized controlled RSA study involving 62 patients with 24-month follow-up.

Background and purpose - Despite the good results after total hip arthroplasty (THA), new implants are continuously being developed to improve durability. The Echo Bi-Metric (EBM) THA stem is the successor to the Bi-Metric (BM) THA stem. The EBM stem includes many of the features of the BM stem, but minor changes in the design might improve the clinical performance. We compared the migration behavior with radiostereometric analysis (RSA) of the EBM stem and the BM stem at 24 months and evaluated the clinical outcome. Patients and methods - We randomized 62 patients with osteoarthritis (mean age 64 years, female/male 28/34) scheduled for an uncemented THA to receive either an EBM or a BM THA stem. We performed RSA within 1 week after surgery and at 3, 6, 12, and 24 months. The clinical outcome was evaluated using Harris Hip Score (HHS) and Oxford Hip Score (OHS). Results - At 24 months, we found no statistically significant differences in migration between the two implants. During the first 3 months both the EBM and the BM stems showed visible subsidence (2.5 mm and 2.2 mm respectively), and retroversion (2.5° and 2.2° respectively), but after 3 months this stabilized. The expected increase in HHS and OHS was similar between the groups. Interpretation - The EBM stem showed a migration at 24 months not different from the BM stem, and both stems display satisfying clinical results.

Migration of a novel 3D-printed cementless versus a cemented total knee arthroplasty: two-year results of a randomized controlled trial using radiostereometric analysis.

AIMS: Although bone cement is the primary mode of fixation in total knee arthroplasty (TKA), cementless fixation is gaining interest as it has the potential of achieving lasting biological fixation. By 3D printing an implant, highly porous structures can be manufactured, promoting osseointegration into the implant to prevent aseptic loosening. This study compares the migration of cementless, 3D-printed TKA to cemented TKA of a similar design up to two years of follow-up using radiostereometric analysis (RSA) known for its ability to predict aseptic loosening. METHODS: A total of 72 patients were randomized to either cementless 3D-printed or a cemented cruciate retaining TKA. RSA and clinical scores were evaluated at baseline and postoperatively at three, 12, and 24 months. A mixed model was used to analyze the repeated measurements. RESULTS: The mean maximum total point motion (MTPM) at three, 12, and 24 months was 0.33 mm (95% confidence interval (CI) 0.25 to 0.42), 0.42 mm (95% CI 0.33 to 0.51), and 0.47 mm (95% CI 0.38 to 0.57) respectively in the cemented group, versus 0.52 mm (95% CI 0.43 to 0.63), 0.62 mm (95% CI 0.52 to 0.73), and 0.64 mm (95% CI 0.53 to 0.75) in the cementless group (p = 0.003). However, using three months as baseline, no difference in mean migration between groups was found (p = 0.497). Three implants in the cemented group showed a > 0.2 mm increase in MTPM between one and two years of follow-up. In the cementless group, one implant was revised due to pain and progressive migration, and one patient had a liner-exchange due to a deep infection. CONCLUSION: The cementless TKA migrated more than the cemented TKA in the first two-year period. This difference was mainly due to a higher initial migration of the cementless TKA in the first three postoperative months after which stabilization was observed in all but one malaligned and early revised TKA. Whether the biological fixation of the cementless implants will result in an increased long-term survivorship requires a longer follow-up. Cite this article: Bone Joint J 2020;102-B(8):1016-1024.

Effective radiation dose in radiostereometric analysis of the hip.

Background and purpose - Radiostereometric analysis (RSA) is the gold standard to study micromotion of joint replacements. RSA requires the acquisition of additional radiographs increasing the radiation dose of patients included in RSA studies. It is important to keep this dose as low as possible. Effective radiation dose (ED) measurements of RSA radiographs for different joints were done by Teeuwisse et al. some years ago using conventional radiology (CR); for total hip arthroplasty (THA), Teeuwisse et al. reported an ED of 0.150 milliSievert (mSv). With the modern digital radiography (DR) roentgen technique the ED is expected to be less.Material and methods - In this phantom study, simulating a standard patient, the ED for hip RSA radiographs is determined using DR under a variety of different roentgen techniques. The quality of the RSA radiographs was assessed for feasibility in migration analysis using a (semi-)automatic RSA analysis technique in RSA software.Results - A roentgen technique of 90 kV and 12.5 mAs with additional 0.2 copper (Cu) + 1 mm aluminum (Al) external tube filters results in an ED of 0.043 mSv and radiographs suitable for analysis in RSA software.Interpretation - The accumulated ED for a standard patient in a 2-year clinical hip RSA study with 5 follow-up moments and a double acquisition is below the acceptable threshold of 1.0 mSv provided by the EU radiation guideline for studies increasing knowledge for general health.

Does migration of osseointegrated implants for transfemoral amputees predict later revision? A prospective 2-year radiostereometric analysis with 5-years clinical follow-up.

BACKGROUND: The osseointegrated (OI) prosthesis is a treatment option for transfemoral amputees with a short residual femur and/or difficulties caused by using the prosthetic socket. Implant removal due to aseptic or septic loosening is not uncommon, but the association between implant migration patterns and the need for removal has not previously been studied. We conducted a prospective model-based radiostereometric analysis study to investigate: if the OI implant migration pattern 1) differs between later removed implants and non-removed implants, (2) predicts later implant removal, and (3) if the precision of the method is acceptable. HYPOTHESIS: Model-based radiostereometric analysis of the OI implant migration pattern can be used to predict later OI implant removal. MATERIAL AND METHODS: A prospective cohort of 17 consecutive transfemoral amputees suitable for surgery (11 males), mean age 50 (range 32-66) were treated with an OI implant (Integrum AB, Sweden). Postoperative stereoradiographs of the OI implant were obtained during 24-month follow-up. X, Y, and Z translations and total translations were evaluated using CAD-implant models. Implant survival was followed for up to 60 months. RESULTS: Six total implant removals (fixture and abutment) and four partial removals (abutment) were conducted (10/17 (59%)), and one patient did not use the OI implant. The removed implants group migrated a mean (±standard deviation) 0.55mm±0.75mm (p=0.009) and the non-removed implants group migrated 0.31mm±0.51mm (p=0.22) in total translations from 3 months to last follow-up. Odds ratio for implant removal was 22.5 (95% CI: 1.6 to 314 (p=0.021)) if the OI implants migrated distally. CONCLUSION: Later removed OI implants migrated from 3 months to last follow-up and more than the non-removed OI implants. Distal implant migration greatly increased the odds of implant removal. Ten out of 17 OI implants were removed within 5 years of follow-up. We advise to use OI implants with caution and close follow-up in consideration of the risk of complications. LEVEL OF EVIDENCE: IV, Prospective study.

The assessment of the stability of the tibial component of a novel knee arthroplasty system using radiostereometric analysis.

AIMS: The introduction of a novel design of total knee arthroplasty (TKA) must achieve outcomes at least as good as existing designs. A novel design of TKA with a reducing radius of the femoral component and a modified cam-post articulation has been released and requires assessment of the fixation to bone. Radiostereometric analysis (RSA) of the components within the first two postoperative years has been shown to be predictive of medium- to long-term fixation. The aim of this study was to assess the stability of the tibial component of this system during this period of time using RSA. PATIENTS AND METHODS: A cohort of 30 patients underwent primary, cemented TKA using the novel posterior stabilized fixed-bearing (ATTUNE) design. There was an even distribution of men and women (15:15). The mean age of the patients was 64 years (sd 8) at the time of surgery; their mean body mass index (BMI) was 35.4 kg/m 2 (sd 7.9). RSA was used to assess the stability of the tibial component at 6, 12, and 24 months compared with a six-week baseline examination. Patient-reported outcome measures were also assessed. RESULTS: The mean maximum total point motion (MTPM) of the tibial component between 12 and 24 months postoperatively was 0.08 mm (sd 0.08), which is well below the published threshold of 0.2 mm (p < 0.001). Patient-reported outcome measures consistently improved. CONCLUSION: The tibial component of this novel design of TKA showed stability between assessment 12 and 24 months postoperatively, suggesting an acceptably low risk of medium- to long-term failure due to aseptic loosening.

Stereoradiography imaging motion artifact: does it affect radiographic measures after spinal instrumentation?

PURPOSE: Stereoradiography imaging (SRI) is an accurate and reliable low-dose radiographic method. However, patients must remain motionless during image acquisition. Motion artifacts are frequently noted. The aims of the study were to determine the incidence of the SRI motion artifact and assess if motion during SRI acquisition affects radiographic measurements. METHODS: In this retrospective study, 198 patients with spinal instrumentation had biplanar SRI radiographs performed, of whom 39 had concomitant conventional radiographs. Eight coronal and sagittal spinal parameters were independently measured on SRI and conventional radiographs for the 39 patients by 2 observers. Inclusion criteria were: presence of spinal instrumentation of more than six levels and an SRI motion artifact identified on the coronal and/or the sagittal views on either the spinal rods or on the limbs. Means were compared between both types of radiographs using the Student's t test; intraclass correlation coefficients (ICCs) were used for intraobserver reproducibility and interrater reliability. RESULTS: A motion artifact was identified in 19.7 % (n = 39, mean age 19.5 ± 1.7 years) of the cases. There were no differences in any of the coronal or sagittal plane measurements between SRI and X-rays. Intraobserver reliability and interrater reproducibility was high (range 0.81-0.98). CONCLUSIONS: Motion artifact during full-spine stereoradiography imaging acquisition is frequent, but does not affect spinal measurements. SRI with a motion artifact can be used to produce reliable measurements of the sagittal and coronal parameters. Some SRI images with a motion artifact may suggest loss of fixation or bending of the rods. However, after becoming familiar with the appearance of the motion artifact, repeat radiographs are rarely indicated. IRB NUMBER: 14-004872. LEVEL OF EVIDENCE: Level IV.

Radiostereometric migration measurement of an uncemented Cerafit® femoral stem: 26 patients followed for 10 years.

Radiostereometric analysis (RSA) is the gold standard for evaluating micromotions of orthopaedic implants. The method is applied for identifying novel design weaknesses in endoprostheses. Current research frequently assesses relatively short time periods. Short-term RSA studies have been widely used for predicting the long-term stability of many hip prosthetic designs, but only a few studies have focused on uncemented hip implants, especially for extended periods. The purpose of this study was to analyse the migration pattern of the Cerafit® femoral stem within 10 years and to verify the predictive value of short-term RSA after 2 years for this uncemented femoral hip stem. Twenty-six patients were followed for 10 years. Ten years after implantation, a mean subsidence of 0.22 mm±0.56 mm, a mean internal rotation of 0.59°±1.67° and a mean maximum total point motion (MTPM) of 1.28 mm±0.54 mm were detected. The main migration took place in the first 6 weeks after surgery (subsidence of 0.36 mm±0.73 mm; internal rotation of 0.62°±1.49°, MTPM of 1.05 mm±0.68 mm). All the migration values measured were small. No late-onset migration was observed. This study suggests that the Cerafit® implants are stable after 10 years. Thus, RSA could be the best tool to assess long-term implant behaviour.

Radiostereometric analysis of keeled versus pegged glenoid components in total shoulder arthroplasty: a randomized feasibility study.

BACKGROUND: This study aimed to assess differences in the fixation and functional outcomes between pegged and keeled all-polyethylene glenoid components for standard total shoulder arthroplasty. METHODS: Patients were randomized to receive a keeled or pegged all-polyethylene glenoid component. We used model-based radiostereometric analysis (RSA) to assess glenoid fixation and subjective outcome measures to assess patient function. Follow-up examinations were completed at 6 weeks and 6, 12 and 24 months after surgery. Modifications to the RSA surgical, imaging and analytical techniques were required throughout the study to improve the viability of the data. RESULTS: Stymied enrolment resulted in only 16 patients being included in our analyses. The RSA data indicated statistically greater coronal plane migration in the keeled glenoid group than in the pegged group at 12 and 24 months. Functional outcome scores did not differ significantly between the groups at any follow-up. One patient with a keeled glenoid showed high component migration after 24 months and subsequently required revision surgery 7 years postoperatively. CONCLUSION: Despite a small sample size, we found significant differences in migration between glenoid device designs. Although clinically these findings are not robust, we have shown the feasibility of RSA in total shoulder arthroplasty as well as the value of a high-precision metric to achieve objective results in a small group of patients.

CONTEXTE: Cette étude avait pour objet d'évaluer les différences sur le plan de la fixation et des résultats fonctionnels entre les composants glénoïdiens à plots et à quille, tous deux en polyéthylène, dans une arthroplastie totale traditionnelle de l'épaule. MÉTHODES: La répartition des composants glénoïdiens en polyéthylène à plots et à quille a été faite de façon aléatoire. Nous nous sommes servis de modèles d'analyses radiostéréométriques (ARS) pour évaluer la fixation glénoïdienne et les indicateurs de résultats subjectifs, ce qui nous a ainsi permis d'évaluer les résultats fonctionnels des patients. Quatre examens de suivi ont été réalisés après la chirurgie : à 6 semaines, puis à 6 mois, à 12 mois et à 24 mois. Tout au long de l'étude, des ajustements ont été apportés aux modèles d'ARS de la chirurgie, de l'imagerie et des analyses afin d'améliorer la viabilité des données. RÉSULTATS: Des problèmes liés au recrutement ont fait en sorte que nous n'avons retenu que 16 patients dans le cadre de nos analyses. Les données d'ARS ont montré une migration statistiquement plus grande du plan frontal dans le groupe quille que dans le groupe plots à 12 et à 24 mois. Les résultats fonctionnels étaient sensiblement les mêmes d'un groupe à l'autre, peu importe le moment du suivi. Un patient du groupe quille a présenté une migration très importante du composant après 24 mois; il a dû subir une chirurgie de révision 7 ans après la chirurgie initiale. CONCLUSION: Malgré la petite taille de l'échantillon, nous avons observé des différences significatives dans la migration des composants, selon le type utilisé. Même si ces observations ne permettent pas d'arriver à des conclusions robustes d'un point de vue clinique, nous avons montré qu'il est possible d'avoir recours aux ARS en contexte d'arthroplastie totale de l'épaule et démontré la valeur associée à l'utilisation de mesures de haute précision pour l'obtention de résultats objectifs chez un petit groupe de patients.

Early migration of a partially cemented fluted glenoid component inserted using a cannulated preparation system.

AIMS: Radiostereometric analysis (RSA) allows an extremely accurate measurement of early micromotion of components following arthroplasty. PATIENTS AND METHODS: In this study, RSA was used to measure the migration of 11 partially cemented fluted pegged glenoid components in patients with osteoarthritis who underwent total shoulder arthroplasty using an improved surgical technique (seven men, four women, mean age 68). Patients were evaluated clinically using the American Shoulder and Elbow Surgeons (ASES) and Constant-Murley scores and by CT scans two years post-operatively. RESULTS: There were two patterns of migration, the first showing little, if any, migration and the second showing rotation by > 6° as early as three months post-operatively. At two years, these two groups could be confirmed on CT scans, one with osseointegration around the central peg, and the second with cystic changes. Patients with osteolysis around the central peg were those with early migration and those with osseointegration had minimal early migration. Both groups,however,had similar clinical results. CONCLUSION: Rapid early migration associated with focal lucency and absence of osseointegration was observed in three of 11 glenoid components, suggesting that lack of initial stability leads to early movement and failure of osseointegration. Cite this article: Bone Joint J 2017;99-B:674-9.

Tibial component rotation around the transverse axis measured by radiostereometry predicts aseptic loosening better than maximal total point motion.

Background and purpose - Maximal total point motion (MTPM) measured by radiostereometry (RSA) is widely used as a predictor of total knee arthroplasty (TKA) loosening. We compared the ability of different RSA measurements at different time points to predict loosening of tibial TKA components in the long term. Patients and methods - 116 TKAs in 116 patients were included in our analysis. 16 (14.8-17.4) years after surgery, 5 tibial components had been revised due to aseptic loosening. Receiver operating characteristic curves were calculated in order to investigate the specificity and sensitivity of different RSA parameters at different thresholds. Results - Rotation around the transverse (x-) axis measured 2 years postoperatively had the best predictive value of all parameters, with an area under the curve (AUC) of 80%. Using a threshold of 0.8 degrees, a specificity of 85% and a sensitivity of 50% were reached. The AUC for tibial component distal translation was 79% and it was 77% for proximal translation, whereas it was only 68% for MTPM. Interpretation - Rotation of the cemented tibial component around the transverse axis, proximal translation, and distal translation are slightly better at predicting aseptic loosening than MTPM, and tibial component migration measured after 2 years gives a good prediction of aseptic loosening up to 15 years.

Denosumab reduces early migration in total knee replacement.

Background and purpose - Aseptic loosening is a main cause of late revision in total knee replacement (TKR). Migration of implants as measured by radiostereometric analysis (RSA) can predict future loosening. This migration is associated with bone resorption. Denosumab is a human monoclonal antibody that binds to receptors on osteoclast precursors and osteoclasts. This prevents osteoclast formation, resulting in less bone resorption in cortical and trabecular bone. We investigated whether denosumab can reduce migration of TKR, as measured with RSA. Patients and methods - In this 2-center, randomized, double-blind placebo-controlled trial, 50 patients with osteoarthritis of the knee were treated with an injection of either denosumab (60 mg) or placebo 1 day after knee replacement surgery and again after 6 months. RSA was performed postoperatively and after 6, 12, and 24 months. The primary effect variable was RSA maximal total point motion (MTPM) after 12 months. We also measured other RSA variables and the knee osteoarthritis outcome score (KOOS). Results - The primary effect variable, MTPM after 12 months, showed that migration in the denosumab group was statistically significantly less than in the controls. Denosumab MTPM 12 months was reduced by one-third (denosumab: median 0.24 mm, 10% and 90% percentiles: 0.15 and 0.41; placebo: median 0.36 mm, 10% and 90% percentiles: 0.20 and 0.62). The secondary MTPM variables (6 and 24 months) also showed a statistically significant reduction in migration. There was no significant difference in MTPM for the period 12-24 months. KOOS sub-variables were similiar between denosumab and placebo after 12 and 24 months. Interpretation - Denosumab reduces early migration in total knee replacement, as in previous trials using bisphosphonates. As migration is related to the risk of late loosening, denosumab may be beneficial for long-term results.

Similar migration in computer-assisted and conventional total knee arthroplasty.

Background and purpose - Computer-assisted surgery (CAS) in total knee arthroplasty (TKA) has been used in recent years in the hope of improving the alignment and positioning of the implant, thereby achieving a better functional outcome and durability. However, the role of computer navigation in TKA is still under debate. We used radiostereometric analysis (RSA) in a randomized controlled trial (RCT) to determine whether there are any differences in migration of the tibial component between CAS- and conventionally (CONV-) operated TKA. Patients and methods - 54 patients (CAS, n = 26; CONV, n = 28) with a mean age of 67 (56-78) years and with osteoarthritis or arthritic disease of the knee were recruited from 4 hospitals during the period 2009-2011. To estimate the mechanical stability of the tibial component, the patients were examined with RSA up to 24 months after operation. The following parameters representing tibial component micromotion were measured: 3-D vector of the prosthetic marker that moved the most, representing the magnitude of migration (maximum total point motion, MTPM); the largest negative value for y-translation (subsidence); the largest positive y-translation (lift-off); and prosthetic rotations. The precision of the RSA measurements was evaluated and migration in the 2 groups was compared. Results - Both groups had most migration within the first 3 months, but there was no statistically significant difference in the magnitude of the migration between the CAS group and the CONV group. From 3 to 24 months, the MTPM (in mm) was 0.058 and 0.103 (p = 0.1) for the CAS and CON groups, respectively, and the subsidence (in mm) was 0.005 and 0.011 (p = 0.3). Interpretation - Mean MTPM, subsidence, lift-off, and rotational movement of tibial trays were similar in CAS- and CONV-operated knees.