Acoustic Droplet-Assisted Superhydrophilic-Superhydrophobic Microarray Platform for High-Throughput Screening of Patient-Derived Tumor Spheroids.

Cell-based high-throughput screening is a key step in the current disease-based research, drug development, and precision medicine. However, it is challenging to establish a rapid culture and screening platform for rare cells (patient-derived) due to the obvious differences between the traditional 2D cell model and the tumor microenvironment, as well as the lack of a low-consumption screening platform for low numbers of cells. Here, we developed an acoustic drop-assisted superhydrophilic-superhydrophobic microarray platform for the rapid culture and screening of a few cells. By employing hydrophilic and hydrophobic microarrays, we can automatically distribute the cell suspension into uniform droplets, and these cells can spontaneously form compact 3D cell spheroids within 36 h (similar to the microenvironment of tumors in vivo). By using the acoustic droplet ejection device, we can accurately inject a drug solution with a volume of ∼pL to ∼nL into the droplet, and the whole process can be completed within 20 ms (one print). By using three different cell lines (Caco-2, MCF-7, and HeLa) to optimize the platform, the culture and screening of five patients' colon cancer were subsequently realized. Using three conventional chemotherapeutics (5-fluorouracil, cetuximab, and panitumumab) of various concentrations, the best treatment was screened out and compared with the actual treatment effect of the patients, and the results were extremely similar. As a proof-of-concept application, we have proved that our platform can quickly cultivate patient samples and effectively screen the best treatment methods, highlighting its wide application in precision medicine, basic tumor research, and drug development.

Non-enzymatic electrochemical determination of creatinine using a novel screen-printed microcell.

A low-cost and disposable microcell was constructed with a screen-printed electrode for the non-enzymatic electrochemical determination of creatinine. The working electrode was modified with carbon black and maintained in contact with paper-adsorbed iron (III) ions. A small sample volume of 3 µL was required for the device operation. Then, iron (III) ions were complexed in the presence of creatinine in a chemical step, followed by an electrochemical reduction of non-complexed metallic ions in excess. Cyclic voltammetry and differential-pulse voltammetry experiments were employed for the electrochemical characterizations and analytical performance evaluation of the microcell. The working electrode modification with carbon black provided a significant increase of analytical signal. The sensor presented a linear response for creatinine concentrations ranging from 0.10 to 6.5 mmol L-1, with a limit of detection of 0.043 mmol L-1. Experiments for creatinine determination in real samples were successful performed through of standard recovery in urine.

Large 10 × 10 single cell grid networks of human hNT astrocytes on raised parylene-C/SiO2 substrates.

OBJECTIVE: The 'Astrocytic Network' is an emerging research field for researchers in cell biology. Culturing astrocytes in organised networks is a novel method for permitting controlled studies and investigations into the calcium transients of such networks. Recent research has photolithographically patterned hNT astrocytes on parylene-C inlayed SiO2 trench grid networks. However, it was observed that the trench networks could not specifically immobilise the astrocyte cell bodies to the nodes of the networks. APPROACH: In this study, for the first time, we demonstrate how it is possible to establish grid networks of human hNT astrocytes on raised parylene-C structures where the cell bodies are specifically organised down to the single-cell level on nodes of the grid and connected throughout. MAIN RESULTS: Here, we report these to be the largest patterned single-cell grid network of astrocytes of their kind consisting of 100 cells in a 10 × 10 grid arrangement to an 80% efficiency. We quantify the level of patterning through six cell patterning assessment indices: the parylene adhesion index (PAI); SiO2 attraction index (SAI); node index (NI) and connectivity interval (χI), number of components (k) and fielder value (λ ss) and report that the best connected network is obtained with 65 µm node size, 90 µm node spacing, and 5 µm interconnecting track width (PAI = 0.77 ± 0.040, SAI = 0.12 ± 0.049, NI = 0.81 ± 0.066, χI = 0.25 ± 0.064, k = 2.33 ± 1.528, λ ss = 0.0249 ± 0.0018). We finally demonstrate, through delivery of ATP, that the networks are functional on the raised parylene-C grid structures. SIGNIFICANCE: The significance of this study is that it determines the optimal dimensions to obtain highly organised, large, interlinked, single-cell networks which provide an effective platform to investigate calcium communication within astrocytic networks in an accurate, controlled and repeatable manner.

Hierarchically structured microchip for point-of-care immunoassays with dynamic detection ranges.

Point-of-care (POC) medical assays provide critical information to guide clinical therapy for a broad range of medical scenarios, such as resource-poor settings and specialty departments in hospitals. Even though many types of POC assays can be done in automated devices, these POC assays typically cannot well accommodate the multiplexed detection of biomarkers where a large dynamic range is needed. Here, we report a POC assay, which is both automated and suitable for detecting multiple biomarkers with dynamic detection ranges. We call it a dynamic multiplexed immunoassay (DMI). We control the concentrations of capture antibodies and the intensity of the readout signal to dynamically modulate the detection range of immunoassays (pg mL-1 to µg mL-1), leading to the multiplexed detection of C-reactive protein (CRP), procalcitonin (PCT), and interleukin 6 (IL-6) simultaneously in undiluted human serum samples. The POC assay allows the rapid and accurate detection of infection in patients.

Early sepsis diagnosis via protein and miRNA biomarkers using a novel point-of-care photonic biosensor.

Sepsis is a condition characterized by a severe stage of blood-infection often leading to tissue damage, organ failure and finally death. Fast diagnosis and identification of the sepsis stage (sepsis, severe sepsis or septic shock) is critical for the patient's evolution and could help in defining the most adequate treatment in order to reduce its mortality. The combined detection of several biomarkers in a timely, specific and simultaneous way could ensure a more accurate diagnosis. We have designed a new optical point-of-care (POC) device based on a phase-sensitive interferometric biosensor with a label-free microarray configuration for potential high-throughput evaluation of specific sepsis biomarkers. The sensor chip, which relies on the use of metallic nanostructures, provides versatility in terms of biofunctionalization, allowing the efficient immobilization of different kind of receptors such as antibodies or oligonucleotides. We have focused on two structurally different types of biomarkers: proteins, including C-reactive protein (CRP) and Interleukin 6 (IL6), and miRNAs, using miRNA-16 as an example. Limits of Detection (LoD) of 18 µg mL-1, 88 µg mL-1 and 1 µM (6 µg mL-1) have been respectively obtained for CRP, IL6 and miRNA-16 in individual assays, with high accuracy and reproducibility. The multiplexing capabilities have also been assessed with the simultaneous analysis of both protein biomarkers.

DNA microarray analysis using a smartphone to detect the BRCA-1 gene.

DNA microarrays are used to examine changes in gene expression of a large number of genes simultaneously by fluorescent labeling of complementary DNAs (cDNAs). The major bottleneck in implementing microarray technology in resource-limited settings lies in the detection instrument used for generating images of spotted oligonucleotides post-hybridization. While various methods such as a lateral flow assay have been presented to accomplish point-of-care disease detection, there is no simple and effective instrument available to gather spot images maintaining the standard microarray procedures. Nanotechnology based sensors connected with a portable smartphone readout system have the potential to be implemented in microarray technology. Here, we describe a portable fluorescence microarray based imaging system connected to a smartphone for detecting breast cancer gene expression (BRCA-1) from exon 11. This is based on the interactive binding of probe DNA to Cy3-target DNA. A paper-based microfluidics approach was used to demonstrate the DNA hybridization assay. The imaging principles of the assembled device named "FluoroZen" are similar to those of a fluorescence microscope. It uses two light spectrum filters, one to excite the fluorescent dye and the other to capture the emission spectrum. The images were acquired by using CCD cameras from FluoroZen. The smartphone integrated paper microfluidics platform presented here could be translated into clinical settings to perform point-of-care testing.

A Sol-gel Integrated Dual-readout Microarray Platform for Quantification and Identification of Prostate-specific Antigen.

Here, we report a sol-gel integrated affinity microarray for on-chip matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) that enables capture and identification of prostate?specific antigen (PSA) in samples. An anti-PSA antibody (H117) was mixed with a sol?gel, and the mixture was spotted onto a porous silicon (pSi) surface without additional surface modifications. The antibody easily penetrates the sol-gel macropore fluidic network structure, making possible high affinities. To assess the capture affinity of the platform, we performed a direct assay using fluorescein isothiocyanate-labeled PSA. Pure PSA was subjected to on-chip MALDI-TOF-MS analysis, yielding three clear mass peptide peaks (m/z = 1272, 1407, and 1872). The sol-gel microarray platform enables dual readout of PSA both fluorometric and MALDI-TOF MS analysis in biological samples. Here we report a useful method for a means for discovery of biomarkers in complex body fluids.

Integration of paper-based microarray and time-of-flight secondary ion mass spectrometry (ToF-SIMS) for parallel detection and quantification of molecules in multiple samples automatically.

With its low-cost fabrication and ease of modification, paper-based analytical devices have developed rapidly in recent years. Microarrays allow automatic analysis of multiple samples or multiple reactions with minimal sample consumption. While cellulose paper is generally used, its high backgrounds in spectrometry outside of the visible range has limited its application to be mostly colorimetric analysis. In this work, glass-microfiber paper is used as the substrate for a microarray. The glass-microfiber is essentially chemically inert SiOx, and the lower background from this inorganic microfiber can avoid interference from organic analytes in various spectrometers. However, generally used wax printing fails to wet glass microfibers to form hydrophobic barriers. Therefore, to prepare the hydrophobic-hydrophilic pattern, the glass-microfiber paper was first modified with an octadecyltrichlorosilane (OTS) self-assembled monolayer (SAM) to make the paper hydrophobic. A hydrophilic microarray was then prepared using a CO2 laser scriber that selectively removed the OTS layer with a designed pattern. One microliter of aqueous drops of peptides at various concentrations were then dispensed inside the round patterns where OTS SAM was removed while the surrounding area with OTS layer served as a barrier to separate each drop. The resulting specimen of multiple spots was automatically analyzed with a time-of-flight secondary ion mass spectrometer (ToF-SIMS), and all of the secondary ions were collected. Among the various cluster ions that have developed over the past decade, pulsed C60+ was selected as the primary ion because of its high secondary ion intensity in the high mass region, its minimal alteration of the surface when operating within the static-limit and spatial resolution at the ∼µm level. In the resulting spectra, parent ions of various peptides (in the forms [M+H]+ and [M+Na]+) were readily identified for parallel detection of molecules in a mixture. By normalizing the ion intensity of peptides with respect to the glass-microfiber matrix ([SiOH]+), a linear calibration curve for each peptide was generated to quantify these components in a mixture.

Insights Into Glucan Polysaccharide Recognition Using Glucooligosaccharide Microarrays With Oxime-Linked Neoglycolipid Probes.

Glucans are polysaccharides of increasing biomedical interest because of their involvement in mechanisms of pathogen recognition, modulation of the immune system and anticancer, and health-promoting activities. Most of these biological activities occur through specific interactions with glucan-recognizing proteins. However, detailed molecular studies of glucan recognition remain a challenge mainly due to the inherent sequence heterogeneity and polydispersity of glucan polysaccharides, and associated difficulties in their purification and sequence characterization. It is thus ideal to have a series of sequence-defined glucooligosaccharides to represent the sequence diversity of glucan polysaccharides and to apply these to gain insight into glucan recognition processes. In this chapter, we describe the the methods for developing of oligosaccharide microarrays derived from a collection of glucans with different linkages based on the neoglycolipid (NGL) microarray system. The microscale oxime-ligation method has provided access in microarrays to over 150 sequence-defined glucooligosaccharides with different chain lengths, linkages, and branching patterns. We focus on the essential steps in the preparation of NGL-based glucooligosaccharide microarrays, which include (1) the depolymerization and purification methods to obtain oligosaccharide fractions of defined chain lengths; (2) a mass spectrometry-based method for linkage and sequence analysis of glucooligosaccharides; (3) improved procedures for preparation of oxime-linked NGLs from glucooligosaccharides for construction of microarrays; and (4) analyses of the recognition of these oligosaccharide sequences by various glucan-recognizing proteins: monoclonal antibodies, other proteins of the immune system such as Dectin-1 and DC-SIGN, and carbohydrate-binding modules of bacterial glycoside hydrolases.

Specific capture, recovery and culture of cancer cells using oriented antibody-modified polystyrene chips coated with agarose film.

Agarose gel can be used for three dimensional (3D) cell culture because it prevents cell attachment. The dried agarose film coated on a culture plate also protected cell attachment and allowed 3D growth of cancer cells. We developed an efficient method for agarose film coating on an oxygen-plasma treated micropost polystyrene chip prepared by an injection molding process. The agarose film was modified to maleimide or Ni-NTA groups for covalent or cleavable attachment of photoactivatable Fc-specific antibody binding proteins (PFcBPs) via their N-terminal cysteine residues or 6xHis tag, respectively. The antibodies photocrosslinked onto the PFcBP-modified chips specifically captured the target cells without nonspecific binding, and the captured cells grew 3D modes on the chips. The captured cells on the cleavable antibody-modified chips were easily recovered by treatment of commercial trypsin-EDTA solution. Under fluidic conditions using an antibody-modified micropost chip, the cells were mainly captured on the micropost walls of the chip rather than on the bottom of it. The presented method will also be applicable for immobilization of oriented antibodies on various microfluidic chips with different structures.

Metas-Chip precisely identifies presence of micrometastasis in live biopsy samples by label free approach.

Detecting the micrometastasis is a major challenge in patients' survival. The small volume of the biopsied tissue results in limited number of histopathological samples and might reduce the rate of accurate diagnosis even by molecular technologies. We introduce a microelectronic biochip (named Metas-Chip) to detect the micrometastasis in unprocessed liquid or solid samples. It works based on the tendency of malignant cells to track single human umbilical vein endothelial cell (HUVEC)-sensing traps. Such cells detach themselves from the biopsied sample and invade the sensing traps by inducing membrane retraction and blebbing, which result in sharp changes in electrical response of the sensing elements. Metas-Chip identified the metastasis in more than 70 breast cancer patients, in less than 5 h. Moreover it detected the metastasis in lymph nodes of nine patients whom were missed by conventional pathological procedure. Multilevel IHC and real-time polymerase chain reaction (RT-PCR) tests confirmed the diagnosis.

Rapid Isolation and Detection of Exosomes and Associated Biomarkers from Plasma.

Exosomes found in the circulation are a primary source of important cancer-related RNA and protein biomarkers that are expected to lead to early detection, liquid biopsy, and point-of-care diagnostic applications. Unfortunately, due to their small size (50-150 nm) and low density, exosomes are extremely difficult to isolate from plasma. Current isolation methods are time-consuming multistep procedures that are unlikely to translate into diagnostic applications. To address this issue, we demonstrate the ability of an alternating current electrokinetic (ACE) microarray chip device to rapidly isolate and recover glioblastoma exosomes from undiluted human plasma samples. The ACE device requires a small plasma sample (30-50 µL) and is able to concentrate the exosomes into high-field regions around the ACE microelectrodes within 15 min. A simple buffer wash removes bulk plasma materials, leaving the exosomes concentrated on the microelectrodes. The entire isolation process and on-chip fluorescence analysis is completed in less than 30 min which enables subsequent on-chip immunofluorescence detection of exosomal proteins, and provides viable mRNA for RT-PCR analysis. These results demonstrate the ability of the ACE device to streamline the process for isolation and recovery of exosomes, significantly reducing the number of processing steps and time required.

Conductive nanogel-interfaced neural microelectrode arrays with electrically controlled in-situ delivery of manganese ions enabling high-resolution MEMRI for synchronous neural tracing with deep brain stimulation.

Chronic brain stimulation has become a promising physical therapy with increased efficacy and efficiency in the treatment of neurodegenerative diseases. The application of deep brain electrical stimulation (DBS) combined with manganese-enhanced magnetic resonance imaging (MEMRI) provides an unbiased representation of the functional anatomy, which shows the communication between areas of the brain responding to the therapy. However, it is challenging for the current system to provide a real-time high-resolution image because the incorporated MnCl2 solution through microinjection usually results in image blurring or toxicity due to the uncontrollable diffusion of Mn2+. In this study, we developed a new type of conductive nanogel-based neural interface composed of amphiphilic chitosan-modified poly(3,4 -ethylenedioxythiophene) (PMSDT) that can exhibit biomimic structural/mechanical properties and ionic/electrical conductivity comparable to that of Au. More importantly, the PMSDT enables metal-ligand bonding with Mn2+ ions, so that the system can release Mn2+ ions rather than MnCl2 solution directly and precisely controlled by electrical stimulation (ES) to achieve real-time high-resolution MEMRI. With the integration of PMSDT nanogel-based coating in polyimide-based microelectrode arrays, the post-implantation DBS enables frequency-dependent MR imaging in vivo, as well as small focal imaging in response to channel site-specific stimulation on the implant. The MR imaging of the implanted brain treated with 5-min electrical stimulation showed a thalamocortical neuronal pathway after 36 h, confirming the effective activation of a downstream neuronal circuit following DBS. By eliminating the susceptibility to artifact and toxicity, this system, in combination with a MR-compatible implant and a bio-compliant neural interface, provides a harmless and synchronic functional anatomy for DBS. The study demonstrates a model of MEMRI-functionalized DBS based on functional neural interface engineering and controllable delivery technology, which can be utilized in more detailed exploration of the functional anatomy in the treatment of neurodegenerative diseases.

A novel quantitative microarray antibody capture assay identifies an extremely high hepatitis delta virus prevalence among hepatitis B virus-infected mongolians.

Hepatitis delta virus (HDV) causes the most severe form of human viral hepatitis. HDV requires a hepatitis B virus (HBV) coinfection to provide HDV with HBV surface antigen envelope proteins. The net effect of HDV is to make the underlying HBV disease worse, including higher rates of hepatocellular carcinoma. Accurate assessments of current HDV prevalence have been hampered by the lack of readily available and reliable quantitative assays, combined with the absence of a Food and Drug Administration-approved therapy. We sought to develop a convenient assay for accurately screening populations and to use this assay to determine HDV prevalence in a population with abnormally high rates of hepatocellular carcinoma. We developed a high-throughput quantitative microarray antibody capture assay for anti-HDV immunoglobulin G wherein recombinant HDV delta antigen is printed by microarray on slides coated with a noncontinuous, nanostructured plasmonic gold film, enabling quantitative fluorescent detection of anti-HDV antibody in small aliquots of patient serum. This assay was then used to screen all HBV-infected patients identified in a large randomly selected cohort designed to represent the Mongolian population. We identified two quantitative thresholds of captured antibody that were 100% predictive of the sample either being positive on standard western blot or harboring HDV RNA detectable by real-time quantitative PCR. Subsequent screening of the HBV+ cohort revealed that a remarkable 57% were RNA+ and an additional 4% were positive on western blot alone. CONCLUSION: The quantitative microarray antibody capture assay's unique performance characteristics make it ideal for population screening; its application to the Mongolian HBV surface antigen-positive population reveals an apparent ∼60% prevalence of HDV coinfection among these HBV-infected Mongolian subjects, which may help explain the extraordinarily high rate of hepatocellular carcinoma in Mongolia. (Hepatology 2017;66:1739-1749).

Digital Detection of Exosomes by Interferometric Imaging.

Exosomes, which are membranous nanovesicles, are actively released by cells and have been attributed to roles in cell-cell communication, cancer metastasis, and early disease diagnostics. The small size (30-100 nm) along with low refractive index contrast of exosomes makes direct characterization and phenotypical classification very difficult. In this work we present a method based on Single Particle Interferometric Reflectance Imaging Sensor (SP-IRIS) that allows multiplexed phenotyping and digital counting of various populations of individual exosomes (>50 nm) captured on a microarray-based solid phase chip. We demonstrate these characterization concepts using purified exosomes from a HEK 293 cell culture. As a demonstration of clinical utility, we characterize exosomes directly from human cerebrospinal fluid (hCSF). Our interferometric imaging method could capture, from a very small hCSF volume (20 uL), nanoparticles that have a size compatible with exosomes, using antibodies directed against tetraspanins. With this unprecedented capability, we foresee revolutionary implications in the clinical field with improvements in diagnosis and stratification of patients affected by different disorders.

The physical origins of transit time measurements for rapid, single cell mechanotyping.

The mechanical phenotype or 'mechanotype' of cells is emerging as a potential biomarker for cell types ranging from pluripotent stem cells to cancer cells. Using a microfluidic device, cell mechanotype can be rapidly analyzed by measuring the time required for cells to deform as they flow through constricted channels. While cells typically exhibit deformation timescales, or transit times, on the order of milliseconds to tens of seconds, transit times can span several orders of magnitude and vary from day to day within a population of single cells; this makes it challenging to characterize different cell samples based on transit time data. Here we investigate how variability in transit time measurements depends on both experimental factors and heterogeneity in physical properties across a population of single cells. We find that simultaneous transit events that occur across neighboring constrictions can alter transit time, but only significantly when more than 65% of channels in the parallel array are occluded. Variability in transit time measurements is also affected by the age of the device following plasma treatment, which could be attributed to changes in channel surface properties. We additionally investigate the role of variability in cell physical properties. Transit time depends on cell size; by binning transit time data for cells of similar diameters, we reduce measurement variability by 20%. To gain further insight into the effects of cell-to-cell differences in physical properties, we fabricate a panel of gel particles and oil droplets with tunable mechanical properties. We demonstrate that particles with homogeneous composition exhibit a marked reduction in transit time variability, suggesting that the width of transit time distributions reflects the degree of heterogeneity in subcellular structure and mechanical properties within a cell population. Our results also provide fundamental insight into the physical underpinnings of transit measurements: transit time depends strongly on particle elastic modulus, and weakly on viscosity and surface tension. Based on our findings, we present a comprehensive methodology for designing, analyzing, and reducing variability in transit time measurements; this should facilitate broader implementation of transit experiments for rapid mechanical phenotyping in basic research and clinical settings.

Paper-based microreactor array for rapid screening of cell signaling cascades.

Investigation of cell signaling pathways is important for the study of pathogenesis of cancer. However, the related operations used in these studies are time consuming and labor intensive. Thus, the development of effective therapeutic strategies may be hampered. In this work, gel-free cell culture and subsequent immunoassay has been successfully integrated and conducted in a paper-based microreactor array. Study of the activation level of different kinases of cells stimulated by different conditions, i.e., IL-6 stimulation, starvation, and hypoxia, was demonstrated. Moreover, rapid screening of cell signaling cascades after the stimulations of HGF, doxorubicin, and UVB irradiation was respectively conducted to simultaneously screen 40 kinases and transcription factors. Activation of multi-signaling pathways could be identified and the correlation between signaling pathways was discussed to provide further information to investigate the entire signaling network. The present technique integrates most of the tedious operations using a single paper substrate, reduces sample and reagent consumption, and shortens the time required by the entire process. Therefore, it provides a first-tier rapid screening tool for the study of complicated signaling cascades. It is expected that the technique can be developed for routine protocol in conventional biological research laboratories.

Robust nanoplasmonic substrates for aptamer macroarrays with single-step detection of PDGF-BB.

An aptamer macroarray on a robust nanoplasmonic substrate with fluorescence enhancement is developed for a single-step sensitive detection of human platelet-derived growth factor-BB (PDGF-BB), a predominant cancer biomarker in cancer angiogenesis. A hybrid Au-nanoparticles-poly (dimethylsiloxane) (PDMS) as nanoplasmonic substrate is prepared via the in-situ reduction of AuCl4(-) ions in PDMS matrixes onto 96 or 384 well plates. In the absence of target molecules, unfolded PDGF-BB aptamer conjugated with dye TAMRA is electrostatically bound to a positively charged poly-L-lysine (PLL)-coated Au nanocomposites film surface, and the fluorescence enhancement effects can be optimized by varying the distance between TAMRA and the Au nanocomposites film, which is easily adjusted by varying the thickness of the biocompatible poly-(acrylic acid) (PAA/PLL) multilayers, and thus metal-enhanced fluorescence of dye TAMRA conjugated with the aptamer is generated up to 15.2-fold. The interaction of the aptamer to its target induces the reversible conformation change of the aptamer, and consequently, the electrostatic potential is overcome by binding force. As a result, the target-binding interaction of the aptamer causes the irreversible detachment of the aptamer from the nanostructured Au film surface to decrease fluorescence of TAMRA. The aptamer macroarray provides not only the appropriate sensitivity for clinical diagnostics with a wide range of linear detection from 10pg/mL to 10µg/mL, high specificity for PDGF-BB against VEGF-165, VEGF-121, NaCl and IgG, and temporal biological stability, but also a single-step detection. We envision that the efficient and robust aptamer macroarray can be extended to the detection of other biomarkers.