Variations in the Cross-Sectional Shape of the Apical Thirds of the Root Canals in Maxillary and Mandibular Teeth

Abstract Objective: To determine the prevalence of cross-sectional variations in the apical thirds of the root canals in maxillary and mandibular teeth. Material and Methods: Eighty tooth samples (maxillary second premolar, maxillary first molar, and mandibular first molar) were scanned using micro-computed tomography. The apical third area of each root canal was sectioned and the maximum and minimum diameters were calculated from the mesiodistal and buccolingual diameters. The shapes were categorized as a round, oval, long oval, and flat based on the ratios obtained. Results: The most common shape of the apical third of the root canals in the maxillary second premolars was oval (66.7%), followed by long oval (24.6%), flat (7%), and round (1.7%). The corresponding values in the mesiobuccal root of the maxillary first molars were oval (68.2%), long oval (22.7%), flat (9.1%), 94.1% of the distobuccal roots were oval, while the remaining were long oval (5.9%). All the palatal root canals were oval. In the mesiobuccal root of the mandibular first molars, 47.4% were long oval in shape, followed by 36.8% oval and 15.8% flat canals. All the mesiolingual root canals were oval, whereas, in the distal root, 68.4% were oval, 21.1% long oval, and 10.5% were flat. Conclusion: The oval shape was most commonly observed in the majority of the root canals. Knowledge about the apical anatomy of the root can help the operator improve the root canal treatment's success.

Horizontal Whole Mount: A Novel Processing and Imaging Protocol for Thick, Three-dimensional Tissue Cross-sections of Skin.

Processing a tissue of interest to generate a microscopic image that supports a scientific argument can be challenging. The acquisition of high-quality microscopic images is not entirely dependent upon the quality of the microscope, but also upon the methods of tissue processing, which often involve multiple critical actions or steps. Furthermore, mesenchymal cell types in the skin and other tissues represent a new challenge for tissue preparation and imaging. Here, we present a complete process, from tissue harvest to microscopy. Our technique, called "horizontal whole mount," is one that novices can quickly become proficient in and that allows for antigen preservation and detection in 60-300 µm-thick sections cut with a cryostat. Sections of this thickness provide enhanced visualization of tissue microarchitecture in a three-dimensional environment. In addition, the protocol preserves mesenchymal cells in a manner that enhances image quality when compared to standard cryostat or paraffin sections, thereby increasing the efficacy and reliability of immunostaining. We believe that this protocol will benefit all laboratories that visualize skin, and possibly other tissues and organs.

Modelo de contorno ativo crisp: nova técnica de segmentação dos pulmões em imagens de TC / Active contour modes crisp: new technique for segmentation the lungs in CT images

Este trabalho propõe um novo método de contornos ativos (MCA), chamado de MCA Crisp, e o avalia na segmentação dos pulmões em imagens de Tomografia Computadorizada (TC). O MCA consiste em traçar uma curva inicial em torno ou dentro de um objeto de interesse. Esta curva se deforma, conforme algumas energias que atuam sobre a mesma, deslocando-a até as bordas do objeto. Este processo é realizado por iterações sucessivas de minimização de uma dada energia, associada à curva. Aplicando MCAs descritos na literatura na segmentação dos pulmões em imagens de TC, constatam-se limitações. Neste contexto, propõe‑-se o MCA Crisp para suprir tais limitações, propondo uma inicialização automática e uma nova energia externa baseada em regras e nas densidades radiológicas pulmonares. Realiza-se uma comparação entre os MCAs Tradicional, Balão, GVF e o método proposto para demonstrar a superioridade do novo método. Em seguida, para validar o MCA Crisp realiza-se uma análise qualitativa junto a um médico especialista na área de Pneumologia do Hospital Universitário Walter Cantídio da Universidade Federal do Ceará. Nesta análise, são utilizados 100  pulmões em imagens de TC. A eficiência da segmentação foi avaliada em  5 categorias, obtendo os seguintes resultados:   73% ótimas, sem falhas, 20% aceitáveis, com pequenos erros, 7% razoáveis, com erros grosseiros e  0% ruim, segmentando apenas uma pequena parte do pulmão, e  0% péssima, obtendo uma segmentação totalmente errada. Conclui-se que o MCA Crisp é um método útil para segmentar os pulmões em imagens de TC e com potencial para integrar sistemas que auxiliem o diagnóstico médico.

This paper proposes a new Active Contour Model (ACM), called ACM Crisp, and evaluates the segmentation of lungs in computed tomography (CT) images. An ACM draws a curve around or within the object of interest. This curve changes its shape, when some energy acts on it and moves towards the edges of the object. This process is performed by successive iterations of minimization of a given energy, associated with the curve. The ACMs described in the literature have limitations when used for segmentations of CT lung images. The ACM Crisp model overcomes these limitations, since it proposes automatic initiation and new external energy based on rules and radiological pulmonary densities. The paper compares other ACMs with the proposed method, which is shown to be superior. In order to validate the algorithm a medical expert in the field of Pulmonology of the Walter Cantídio University Hospital from the Federal University of Ceará carried out a qualitative analysis. In these analyses  100 CT lung images were used. The segmentation efficiency was evaluated into  5 categories with the following results for the ACM Crisp: 73% excellent, without errors, 20% acceptable, with small errors, and  7% reasonable, with large errors, 0% poor, covering only a small part of the lung, and  0% very bad, making a totally incorrect segmentation. In conclusion the ACM Crisp is considered a useful algorithm to segment CT lung images, and with potential to integrate medical diagnosis systems.

Minimum-intensity projection for in-depth morphology study of mesiobuccal root.

OBJECTIVE: This micro-computed tomography (MCT) study investigated the utility of thin-slab minimum-intensity projection (TS-MinIP) technique as an adjunct to 3-dimensional (3D) modeling for in-depth morphology study. STUDY DESIGN: One hundred one extracted maxillary first molars were scanned for microtomographic analysis (SkyScan). Two-dimensional TS-MinIP and 3D images of mesiobuccal (MB) roots were produced and analyzed to record the number and configurations of the canals, the incidence and location of accessory canals, loop, and intercanal connections, and number of foramina. RESULTS: Multiple-canal MB roots were present in 76.2%, and all of the roots had intercanal communications. Weine type III configuration was the most common in the multiple-canal roots. Accessory canals were found in 78.2% of the roots. Configurations that were nonclassifiable were found in 10.9% of the MB roots. CONCLUSIONS: MB root canal anatomy was complex, and MinIP may serve as an adjunct to 3D modeling for in-depth morphology study.

Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy.

BACKGROUND: Selective laser sintering (SLS), three-dimensional printing (3DP) and PolyJet are rapid prototyping (RP) techniques to fabricate prototypes from virtual biomedical images. To be used in maxillofacial surgery, these models must accurately reproduce the craniofacial skeleton. PURPOSE: To analyze the capacity of SLS, 3DP and PolyJet models to reproduce mandibular anatomy and their dimensional error. MATERIAL: Dry mandible, helical CT images, SLS, 3DP and PolyJet prototypes, and digital electronic caliper. METHODS: Helical CT images were acquired from a dry mandible (criterion standard) and manipulated with the InVesalius software. Prototypes were produced using SLS, 3DP and PolyJet techniques. Thirteen linear measurements of each prototype were made and compared with the dry mandible measurements. RESULTS: The results showed a dimensional error of 1.79%, 3.14% and 2.14% for SLS, 3DP and PolyJet models, respectively. The models satisfactorily reproduced anatomic details and the SLS and PolyJet prototypes showed greater dimensional precision and reproduced mandibular anatomy more accurately than the 3DP model. CONCLUSIONS: The SLS prototype had a greater dimensional accuracy than the PolyJet and 3DP models. The PolyJet technique reproduced anatomic details of the mandible more accurately.

Dynamic MRI scan plane control for passive tracking of instruments and devices.

This paper describes a novel image-based method for tracking robotic mechanisms and interventional devices during Magnetic Resonance Image (MRI)-guided procedures. It takes advantage of the multi-planar imaging capabilities of MRI to optimally image a set of localizing fiducials for passive motion tracking in the image coordinate frame. The imaging system is servoed to adaptively position the scan plane based on automatic detection and localization of fiducial artifacts directly from the acquired image stream. This closed-loop control system has been implemented using an open-source software framework and currently operates with GE MRI scanners. Accuracy and performance were evaluated in experiments, the results of which are presented here.

Dual-axes confocal reflectance microscope for distinguishing colonic neoplasia.

A dual-axes confocal reflectance microscope has been developed that utilizes a narrowband laser at 1310 nm to achieve high axial resolution, image contrast, field of view, and tissue penetration for distinguishing among normal, hyperplastic, and dysplastic colonic mucosa ex vivo. Light is collected off-axis using a low numerical aperture objective to obtain vertical image sections, with 4- to 5-microm resolution, at tissue depths up to 610 microm. Post-objective scanning enables a large field of view (610 x 640 microm), and balanced-heterodyne detection provides sensitivity to collect vertical sections at one frame per second. System optics are optimized to effectively reject out-of-focus scattered light without use of a low-coherence gate. This design is scalable to millimeter dimensions, and the results demonstrate the potential for a miniature instrument to detect precancerous tissues, and hence to perform in vivo histopathology.

Design and characterization of a digital image acquisition system for whole-specimen breast histopathology.

We have developed a digital histopathology imaging system capable of producing a three-dimensional (3D) representation of histopathology from an entire lumpectomy specimen. The system has the potential to improve the accuracy of surgical margin assessment in the treatment of breast cancer by providing finer sampling and 3D visualization. A scanning light microscope was modified to allow digital photomicrography of a stack of large (up to 120x170 mm2) histology slides cut serially through the entire specimen. The images are registered and displayed in 2D and 3D. The design of the system, which reduces or eliminates the appearance of 'tiling' and 'seam' artefacts inherent in the scanning method, is described and its resolution, contrast/noise and coverage properties are characterized through measurements of the modulation transfer function (MTF), depth of field (DOF) and signal difference to noise ratio (SDNR). The imaging task requires a lateral resolution of 5 microm, an SDNR of 5 between relevant features, 'tiling artefact' at a level below the detectability threshold of the eye, and 'seam artefact' of less than 5-10 microm. The tests demonstrate that the system is largely adequate for the imaging task, although further optimizations are required to reduce the degradation of coverage incurred by seam artefact.

Functional photoacoustic microscopy for high-resolution and noninvasive in vivo imaging.

Although optical absorption is strongly associated with the physiological status of biological tissue, existing high-resolution optical imaging modalities, including confocal microscopy, two-photon microscopy and optical coherence tomography, do not sense optical absorption directly. Furthermore, optical scattering prevents these methods from imaging deeper than approximately 1 mm below the tissue surface. Here we report functional photoacoustic microscopy (fPAM), which provides multiwavelength imaging of optical absorption and permits high spatial resolution beyond this depth limit with a ratio of maximum imaging depth to depth resolution greater than 100. Reflection mode, rather than orthogonal or transmission mode, is adopted because it is applicable to more anatomical sites than the others. fPAM is demonstrated with in vivo imaging of angiogenesis, melanoma, hemoglobin oxygen saturation (sO2) of single vessels in animals and total hemoglobin concentration in humans.

Imaging the internal structure of the rat cochlea using optical coherence tomography at 0.827 microm and 1.3 microm.

OBJECTIVE: The purpose of this study was to use high-speed optical coherence tomography (OCT) to obtain cross-sectional images of the rat cochlea. STUDY DESIGN AND METHODS: The cochleae of Sprague- Dawley rats were imaged within 2 to 4 hours after death. Specimens were prepared by removing the bulla to expose the mesotympanum; some images were obtained in intact temporal bones removed from the cranium. The central element of an OCT imaging device is a Michelson interferometer combined with a low-coherence light source. This study used 2 OCT systems with different light sources: 1) a semiconductor optical amplifier operating and 2) a superluminescent diode with peak emissions wavelengths of 1.3 microm and 827 nm, respectively. Images (1.87 x 2.00 mm or 1.87 x 1.00 mm, 10 x 10 microm pixel resolution) were acquired at a frame rate of 1 Hz. Cross-sectional images at 100-microm increments were obtained from a medial-to-lateral direction. RESULTS: The scala vestibuli, scala media, scala tympani, modiolus, spiral ligament, and several turns of the cochlea were identified. CONCLUSION: These images reflect the ability of OCT to provide images of the internal cochlea structure with micron scale resolution and at near-real time frame rates.

3-D snake for US in margin evaluation for malignant breast tumor excision using Mammotome.

The goal of this paper is to use the three-dimensional (3-D) snake technique in 3-D ultrasound to obtain the tumor contour for the pre- and the post-operative malignant breast excision by the vacuum assisted biopsy instrument Mammotome. This technique of assessing the margin of two can help the physician to evaluate the effect of the surgery. By using the anisotropic diffusion filter, the noise and speckles can be reduced. Then the stick detection is adopted for enhancing the edge. Finally, the gradient vector flow (GVF) snake is used to obtain the tumor contour. These techniques are extended to the 3-D techniques to increase the accuracy and robust of segmentation results. We hope that this study can help physicians to improve the minimal invasive operation for a breast tumor.

Characterization of human atherosclerosis by optical coherence tomography.

BACKGROUND: High-resolution visualization of atherosclerotic plaque morphology may be essential for identifying coronary plaques that cause acute coronary events. Optical coherence tomography (OCT) is an intravascular imaging modality capable of providing cross-sectional images of tissue with a resolution of 10 micro m. To date, OCT imaging has not been investigated in sufficient detail to assess its accuracy for characterizing atherosclerotic plaques. The aim of this study was to establish objective OCT image criteria for atherosclerotic plaque characterization in vitro. METHODS AND RESULTS: OCT images of 357 (diseased) atherosclerotic arterial segments obtained at autopsy were correlated with histology. OCT image criteria for 3 types of plaque were formulated by analysis of a subset (n=50) of arterial segments. OCT images of fibrous plaques were characterized by homogeneous, signal-rich regions; fibrocalcific plaques by well-delineated, signal-poor regions with sharp borders; and lipid-rich plaques by signal-poor regions with diffuse borders. Independent validation of these criteria by 2 OCT readers for the remaining segments (n=307) demonstrated a sensitivity and specificity ranging from 71% to 79% and 97% to 98% for fibrous plaques, 95% to 96% and 97% for fibrocalcific plaques, and 90% to 94% and 90% to 92% for lipid-rich plaques, respectively (overall agreement, kappa=0.83 to 0.84). The interobserver and intraobserver reliabilities of OCT assessment were high (kappa values of 0.88 and 0.91, respectively). CONCLUSIONS: Objective OCT criteria are highly sensitive and specific for characterizing different types of atherosclerotic plaques. These results represent an important step in validating this new intravascular imaging modality and will provide a basis for the interpretation of intracoronary OCT images obtained from patients.

Three-dimensional imaging of the postmortem fetus by MRI: early experience.

OBJECTIVE: The feasibility and significance of three-dimensional (3D) visualization of the postmortem fetus using magnetic resonance imaging (MRI) was investigated. METHODS: 3D reconstruction of sectional MRI data sets from 8 postmortem fetuses was performed. RESULTS: Fetal configurations and internal structures, both normal and pathological, were clearly demonstrated by 3D display. CONCLUSION: This new technique provides high quality fetal 3D images for postmortem morphological diagnosis and interactive visual teaching. It may eventually have applications in prenatal diagnosis and the preoperative simulation of fetal surgery.