Estudio cadavérico de anteversión de cuello femoral en Población de Indonesia / Cadaveric Study Of Femoral Neck Anteversion In Indonesian Population

Objective: The normal morphology of femoral anteversion is an essential factor which determines the clinical results of hip replacement to achieve the normal activity and the length of the replaced joint. No previous study has been documented regarding normal value of femoral anteversion in Indonesian population and how they are different with Western, India and African population. This study aimed on measurement of normal femoral anteversion values of Indonesian population and compare it with existing data of Western, African and India values. Method: This cross-sectional study by measuring the femoral neck anteversion angle in 120 samples of Indonesians's cadaveric femur. Comparisons were made between Western, African and India. Result: The result showed that the average values of femoral neck anteversion angle in men were 11.60 ± 4.83 and 12.96 ± 5.1 in the right and left parts respectively, while in women, the results were 14.83+-5.14 and 13.37+-5.66 in right and left parts. The p value of ≤ 0.05 was considered to be significant. Conclusion: The mean femoral anteversion values of Indonesian population is 13.22. It is significantly different in comparison with Western, African, and Indian population.

Non-equivalent Results from Different Anteversion Measurements Methods for the Evaluation of the Acetabular Cup Orientation in Total Hip Arthroplasty.

OBJECTIVE: To determine the comparability among 10 radiographic anteversion methods for acetabular cup orientation in total hip arthroplasty (THA) found in the literature and the "gold" standard of assessing the anteversion with CT. METHODS: This is a retrospective study that blindly compares 10 different conventional radiographic anteversion measurements with the "gold" standard, the measurement of anteversion on the transverse plane of the 3-D images made with CT. The patient archiving and communications system (PACS) was systematically searched for subjects that had undergone a CT angiogram of the abdomen and lower extremities, including the pelvis, had at least one THA in situ and had undergone anterior-posterior (AP) and cross-lateral pelvic radiography between January 2013 and August 2016 in the Diakonessenhuis Hospital Utrecht/Zeist, a non-academic institution. CT scans of patients (n = 16) were systematically collected. Three observers independently measured cup anteversion from radiographs, using a total of 10 different methods, and measured the "gold" standard on CT images. The outcomes of the 10 radiographic anteversion were compared in terms of linear correlation with the "gold" standard on CT images. RESULTS: The correlations of the radiographic measured anteversions with the "gold" standard measured on CT images were 0.528 for the method of Liaw, 0.556 for Wan, 0.562 for the cross-lateral method, 0.586 for Hassan, 0.594 for Dorr, 0.602 for Lewinnek, 0.624 for Widmer, 0.671 for the lateral CT, 0.747 for Ackland, and 0.771 for the method of Riten Pradham. CONCLUSION: Anteversion measurement methods represent different projectional angles of the acetabular cup in different planes around different axes. Therefore, they differ from the "gold" standard and are not interchangeable, as is shown by this study. We consider the anatomical anteversion in the transverse plane rotating around the longitudinal axis as the "gold" standard and recommend avoiding using the term anteversion for other projectional angles in different planes.

The best method for evaluating anteversion of the acetabular component after total hip arthroplasty on plain radiographs.

BACKGROUND: Several radiological methods for measuring the anteversion of the acetabular component after total hip arthroplasty (THA) exist, and no single standardized method has been established. We evaluated the reliability and accuracy of six widely utilized methods (Liaw et al., Lewinnek et al., Widmer, Hassan et al., Ackland et al., and Woo and Morrey) for measuring anteversion on plain radiographs, using a reference standard in the same definition obtained from the PolyWare programme. METHODS: We reviewed 71 patients who underwent primary unilateral THA. The anteversion of the acetabular component was measured on pelvis AP radiographs using five different methods (Liaw et al., Lewinnek et al., Widmer, Hassan et al., and Ackland et al.) and on cross-table lateral radiographs using the method of Woo and Morrey. The values obtained using the PolyWare programme, which determines the anteversion of the acetabular component by edge detection, were regarded as the reference standard. RESULTS: Intra- and inter-observer reliabilities were excellent for all methods using plain radiographs, including the PolyWare programme. The method of Liaw et al. obtained values similar to those obtained using the PolyWare programme and was thus considered accurate (P = 0.447). However, values obtained using the other five methods significantly differed from those obtained using the PolyWare programme and were thus considered less accurate (P < 0.001, P < 0.001, P < 0.001, P = 0.007, and P < 0.001, respectively). CONCLUSION: The method of Liaw et al. is more accurate than other methods using plain radiographs for the measurement of the anteversion of the acetabular component after THA, with reference to the anteversion obtained from the PolyWare programme.

Can Computed Tomography Accurately Measure Acetabular Anterversion in Developmental Dysplasia of the Hip? Verification and Characterization Using 3D Printing Technology.

BACKGROUND: One of the important pathologic changes in developmental dysplasia of the hip (DDH) is increased acetabular version angle (AA). Reasonable correction for excessive AA is an important step in the treatment of DDH, making accurate AA measurement very crucial. However, the results of different AA measurement methods vary. Thus, this study aimed to compare the difference in AA measurements between 2-dimensional computed tomography (2D-CT) and 3-dimensional computed tomography (3D-CT) in children with DDH and to identify the AA degree in children with DDH to guide treatment. METHODS: AA was measured by 2D-CT and 3D-CT in 186 children with DDH, and the measurement results were compared with the physical measurement result in the 3D-printed pelvis (3D-PP) model. The 3D-PP was a 1:1 model identical to the human pelvis. All patients were unilaterally affected. RESULTS: The results of AA measurement through 2D-CT, 3D-CT, and 3D-PP of normal hips were 14.0±6.6, 11.9±5.3, and 11.9±3.4 degrees, respectively, whereas those of the dislocated hips were 24.9±8.9, 19.8±5.2, and 19.5±4.3 degrees, respectively. In both the normal and dislocated hip groups, the results between 2D-CT and 3D-CT was significantly different (P<0.05), but there was no difference between the results of 3D-CT and 3D-PP (P>0.05). The AA of the normal and dislocated hips as measured by 3D-PP was 11.9±3.6 and 19.6±4.3 degrees, respectively, with statistically significant difference (P<0.05). In the dislocated hips, a significant positive correlation was found between age and AA (r=0.756, P<0.05) and between AA and degree of dislocation (r=0.837, P<0.05). CONCLUSIONS: 3D-CT is more accurate than 2D-CT for AA measurement, and compared with normal hips, AA in dislocated hips increased by ∼7.7 degrees on average. AA increases as age and degree of dislocation increase. LEVEL OF EVIDENCE: Level II.

Acetabular Global Insufficiency in Patients with Down Syndrome and Hip-Related Symptoms: A Matched-Cohort Study.

BACKGROUND: The etiology of hip instability in Down syndrome is not completely understood. We investigated the morphology of the acetabulum and femur in patients with Down syndrome and compared measurements of the hips with those of matched controls. METHODS: Computed tomography (CT) images of the pelvis of 42 patients with Down syndrome and hip symptoms were compared with those of 42 age and sex-matched subjects without Down syndrome or history of hip disease who had undergone CT for abdominal pain. Each of the cohorts had 23 male and 19 female subjects. The mean age (and standard deviation) in each cohort was 11.3 ± 5.3 years. The lateral center-edge angle (LCEA), acetabular inclination angle (IA), acetabular depth-width ratio (ADR), acetabular version, and anterior and posterior acetabular sector angles (AASA and PASA) were compared. The neck-shaft angle and femoral version were measured in the patients with Down syndrome only. The hips of the patients with Down syndrome were further categorized as stable (n = 21) or unstable (n = 63) for secondary analysis. RESULTS: The hips in the Down syndrome group had a smaller LCEA (mean, 10.8° ± 12.6° compared with 25.6° ± 4.6°; p < 0.0001), a larger IA (mean, 17.4° ± 10.3° compared with 10.9° ± 4.8°; p < 0.0001), a lower ADR (mean, 231.9 ± 56.2 compared with 306.8 ± 31.0; p < 0.0001), a more retroverted acetabulum (mean acetabular version as measured at the level of the centers of the femoral heads [AVC], 7.8° ± 5.1° compared with 14.0° ± 4.5°; p < 0.0001), a smaller AASA (mean, 55.0° ± 9.9° compared with 59.7° ± 7.8°; p = 0.005), and a smaller PASA (mean, 67.1° ± 10.4° compared with 85.2° ± 6.8°; p < 0.0001). Within the Down syndrome cohort, the unstable hips showed greater femoral anteversion (mean, 32.7° ± 14.6° compared with 23.6° ± 10.6°; p = 0.002) and worse global acetabular insufficiency compared with the stable hips. No differences between the unstable and stable hips were found with respect to acetabular version (mean AVC, 7.8° ± 5.5° compared with 7.6° ± 3.8°; p = 0.93) and the neck-shaft angle (mean, 133.7° ± 6.7° compared with 133.2° ± 6.4°; p = 0.81). CONCLUSIONS: Patients with Down syndrome and hip-related symptoms had more retroverted and shallower acetabula with globally reduced coverage of the femoral head compared with age and sex-matched subjects. Hip instability among those with Down syndrome was associated with worse global acetabular insufficiency and increased femoral anteversion, but not with more severe acetabular retroversion. No difference in the mean femoral neck-shaft angle was observed between the stable and unstable hips in the Down syndrome cohort. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Clinical Results and Serum Metal Ion Concentrations following Ceramic-on-Metal Total Hip Arthroplasty at a Mean Follow-Up of 60 Months.

Background. Increased metal ion levels following total hip arthroplasty (THA) with metal-on-metal bearings are a highly debated topic. Local soft tissue reactions with chronic pain and systemic side effects such as neuropathy are described. The aim of the current study was to determine the serum metal ion concentrations of Cobalt (Co) and Chrome (Cr) after THA with a ceramic-on-metal (CoM) bearing. Patients and Methods. Between 2008 and 2010, 20 patients underwent THA using a CoM bearing. Clinical function was evaluated by standardized scores systems (Harris Hip Score and WOMAC Score) and radiological examination included X-rays. Patient's blood samples were obtained for metal ion analysis and correlation analysis was done between these results and implant position. Results. Overall, 13 patients with 14 CoM devices were available for the current series. The mean age at time of surgery was 61 years (range, 41 to 85). The postoperative follow-up ranged from 49 to 68 months (mean, 58). Metal ion determination showed mean concentrations of 3,1 µg/L (range, 0,3-15,2 µg/L) for Co and 1,6 µg/L (range, 0,1-5,5 µg/L) for Cr, respectively. A correlation between cup anteversion and Co and Cr concentrations was shown. Conclusion. The current series showed increments for Co and Cr following CoM THA. However, these levels are lower compared to metal ion concentrations in patients with metal-on-metal bearings and the international accepted threshold for revision of MoM devices. We recommend routine follow-up including at least one obligatory evaluation of serum metal ion concentrations and an MRI once to exclude local soft tissue reactions.

Does increased femoral antetorsion predispose to cartilage lesions of the patellofemoral joint?

PURPOSE: The purpose of this study was to investigate whether there was a relationship between femoral neck antetorsion and the presence and pattern of osteoarthritis of the patellofemoral joint. It was hypothesized that an increased femoral neck antetorsion (1) correlates with osteoarthritic changes of the lateral facet of the patellofemoral joint and (2) correlates with an increased lateral trochlear height and a decreased sulcus angle. METHODS: Seventy-eight formalin-embedded cadaveric lower extremities from thirty-nine subjects with a median age of 74 years (range 60-88) were used. Surrounding soft tissues of the lower limb were removed. The femoral neck antetorsion was measured and referenced to the transepicondylar axis and the posterior condylar line. The height of the medial and lateral facet of the trochlea and the sulcus angle was measured. The location and the degree of patellofemoral cartilage degeneration were recorded. A Pearson's correlation analysis was performed to correlate the femoral neck antetorsion with the measured knee parameters. RESULTS: No significant correlation could be found between the femoral antetorsion and cartilage degeneration of the lateral patellofemoral joint (n.s.), the height of the lateral trochlea (n.s.) and the sulcus angle (n.s.). CONCLUSION: This study could not document that the femoral neck antetorsion and subsequent internal rotation of the distal femur correlated with the degree of degeneration of the lateral facet of the patellofemoral joint. Clinically, femoral internal rotation may play a minor role in the development of lateral patellofemoral joint degeneration.

Coronal alignment is a predictor of the rotational geometry of the distal femur in the osteo-arthritic knee.

PURPOSE: There is a lot of inter-individual variation in the rotational anatomy of the distal femur. This study was set up to define the rotational anatomy of the distal femur in the osteo-arthritic knee and to investigate its relationship with the overall coronal alignment and gender. METHODS: CT-scans of 231 patients with end-stage knee osteo-arthritis prior to TKA surgery were obtained. This represents the biggest series published on rational geometry of the distal femur in literature so far. RESULTS: The posterior condylar line (PCL) was on average 1.6° (SD 1.9) internally rotated relative to the surgical transepicondylar axis (sTEA). The perpendicular to trochlear anteroposterior axis (⊥TRAx) was on average 4.8° (SD 3.3°) externally rotated relative to the sTEA. The relationship between the PCL and the sTEA was statistically different in the different coronal alignment groups (p < 0.001): 1.0° (SD 1.8°) in varus knees, 2.1° (SD 1.8°) in neutral knees and 2.6° (SD 1.8°) in valgus knees. The same was true for the ⊥TRAx in these 3 groups (p < 0.02).There was a clear linear relationship between the overall coronal alignment and the rotational geometry of the distal femur. For every 1° in coronal alignment increment from varus to valgus, there is a 0.1° increment in posterior condylar angle (PCL vs sTEA). CONCLUSION: The PCL was on average 1.6° internally rotated relative to the sTEA in the osteo-arthritic knee. The relationship between the PCL and the sTEA was statistically different in the different coronal alignment groups. LEVEL OF EVIDENCE: III.

The effects of broiler chicken growth rate on valgus, varus, and tibial dyschondroplasia.

An experiment was conducted to test the hypothesis that the growth rate of broilers influences their susceptibilities to bone abnormalities, causing major leg problems. Leg angulations, described in the twisted legs syndrome as valgus and bilateral or unilateral varus, were investigated in 2 subpopulations of mixed-sex Arkansas randombred broilers. Valgus angulation was classified as mild (tibia-metatarsus angle between 10 and 25°), intermediate (25-45°), or severe (> 45°). Body weight was measured at hatch and weekly until 6 wk of age. There were 8 different settings of approximately 450 eggs each. Two subpopulations, slow growing (bottom quarter, n = 581) and fast growing (top quarter, n = 585), were created from a randombred population based on their growth rate from hatch until 6 wk of age. At 6 wk of age, tibial dyschondroplasia incidences were determined by making a longitudinal cut across the right tibia. The tibial dyschondroplasia bone lesion is characterized by an abnormal white, opaque, unmineralized, and unvascularized mass of cartilage occurring in the proximal end of the tibia. It was scored from 1 (mild) to 3 (severe) depending on the cartilage plug abnormality size. Mean lesion scores of left and right valgus and tibial dyschondroplasia (0.40, 0.38, and 0.06) of fast-growing broilers were higher than those (0.26, 0.28, and 0.02) of slow-growing broilers (P = 0.0002, 0.0037, and 0.0269), respectively. Growth rate was negatively associated with the twisted legs syndrome and a bone abnormality (tibial dyschondroplasia) in this randombred population.