The comparative study of temperature rise, time consuming and cut quality among piezosurgery, conventional rotary instruments and Er: YAG laser in apicectomy.

OBJECTIVES: This study aimed to compare the temperature rise, time consuming and cut quality of apicectomy using three different methods. MATERIALS AND METHODS: Twenty-four single-rooted teeth were collected and divided into four groups operating apicectomy with a NINJA tip of a piezoelectric device (G1), a diamond bur with 300,000 rpm (G2), and Er: YAG laser at 200 mJ/ 30 Hz (G3) as well as 250 mJ/ 30 Hz (G4). The temperature elevation and time were recorded and the cut quality was evaluated via stereomicroscope and scanning electronic microscopy (SEM). RESULTS: The temperature increases for G1 was significantly higher than for G2. However, there was no significant difference between G1 and G2 with laser groups respectively. The median time for apicectomy was: 100.14s for G1, 22.65s for G2, 33.58s for G3, and 21.80s for G4. G1 is the most time-consuming group and there was no statistically significance in the comparisons with G2, G3 and G4. Cut quality was assessed by crack occurrence, smear layer formation and dentinal tubules exposed. The percentage of cracked teeth in G1 and G2 was 33.33% and for laser groups the percentage was 16.67% each. SEM showed that no smear layer formed and almost all dentinal tubules were exposed on resected surfaces for G3&G4, surfaces from G2 were partly covered by smear layer, and surfaces from G1 were fully covered by smear layer and with no dentinal tubules exposed. CONCLUSIONS: Er: YAG laser and conventional rotary instruments were safe and efficient for apicectomy and with a better cut quality when compared with piezoelectric equipment. Er: YAG laser could be a promising technique for apicectomy and further studies are necessary, especially larger sample in vivo investigations, to verify the feasibility of Er: YAG laser in endodontic surgery.

Periapical surgery and different root obturation protocols for upper central incisor: A finite elements analysis.

BACKGROUND: The aim of this study was to determine the effect of root canal filling using different obturation materials combined with apicoectomy in upper central incisors under loading with 1 N and 100 N. The effect of incomplete root formation was also investigated. METHODS: Based on a CBCT-scan, a model of an upper central incisor was created. The model was altered to simulate different clinical situations: root canal treatment, apicoectomy at two different lengths and with different obturation protocols, and immature root formation after trauma. In each model the tooth was loaded with 1 and 100 N, and peak Von Mises stress of bone and tooth, elastic strain of the periodontal ligament, as well as rotation and displacement of the tooth were measured. RESULTS: Periapical surgery increases stress in dentin and the surrounding bone. Different obturation materials only produce minor differences in a coronally intact tooth. CONCLUSIONS: Interincisal angle or loading direction strongly affects all measured values and needs to be considered when planning periapical surgery or comparing finite element analysis. Immature roots show the highest stress values in this study, reaching half the yield strength of dentine.

Nanosecond infrared laser (NIRL) for cutting roots of human teeth: thermal effects and quality of cutting edges.

A nanosecond infrared laser (NIRL) was investigated in cutting dental roots. The focus of the investigation was defining the preparation accuracy and registration of thermal effects during laser application. Ten teeth were processed in the root area using a NIRL in several horizontal, parallel incisions to achieve tooth root ablation as in an apicoectomy. Temperature change was monitored during ablation and the quality of the cutting edges in the roots were studied by means of micro-CT, optical coherence tomography, and histology of decalcified and undecalcified specimens. NIRL produced clearly defined cut surfaces in dental hard tissues. The automated guidance of the laser beam created regular, narrow dentin defects that tapered in a V-shape towards the ablation plane. A biologically significant increase in the temperature of the object and its surroundings did not occur during the laser application. Thermal dentin damage was not detected in histological preparations of treated teeth. Defined areas of the tooth root may be ablated using a NIRL. For clinical translation of NIRL in apicoectomy, it would be necessary to increase energy delivered to hard tissue and develop beam application facilitating beam steering for oral treatment.

A novel surgical technique to resolve mucosal fenestration of a root apex: Apical tunnel surgery: A case report.

RATIONALE: Endodontic surgery, which includes apex resection, retro-fill and some regeneration procedures, is a traditional way to deal with apex fenestration. The endodontic surgery could bring large flap, curtate root length, non-healing mucosa and soft tissue deficiency in the apex area. Other treatment options might be considered according to different etiological factors. Mucogingival surgery provides some ideas in accumulation of soft and hard tissues, especially some unique methods such as "tunnel technique" bringing us a view of minimal invasive surgery approach. A novel surgery named "apical tunnel surgery" was reported here to resolve a root apex exposure with the tunnel-like technique. PATIENT CONCERNS: A young female complained about root exposure of upper right anterior tooth without history of trauma or orthodontic treatment. DIAGNOSIS: The intraoral examination revealed a buccal root apex exposure about 3mm in diameter of #12 (FDI teeth numbering system). The tooth was slightly dark with Class 1 mobility. The periodontal situation was good and the occlusion check revealed no traumatic bite on #12. The cone-beam computed tomography (CBCT) showed a bone fenestration from the buccally lower 1/2 root surface to the apex and bone absorption around the apex. It also revealed a bone contour deficiency in #12 area. INTERVENTIONS: Root canal treatment, root surface debridement, and soft tissue combined with hard tissue accumulation were carried out in one tunnel-like surgery. OUTCOMES: Examination of 12-month follow-up showed a healed and thickened mucosa in the buccally apical region and CBCT showed the continuous lamina dura occupied the buccal aspect of #12 root apex. LESSONS: This new apical tunnel surgery provided soft and hard tissue accumulation in one minimal invasive way in the apex exposure case caused by bone fenestration and thin mucosa.

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study.

BACKGROUND: Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics. AIM OF THE STUDY: The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests. RESULTS: The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen. CONCLUSION: Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

Accuracy and efficiency of dynamic navigated root-end resection in endodontic surgery: a pilot in vitro study.

BACKGROUND: The operation accuracy and efficiency of dynamic navigated endodontic surgery were evaluated through in vitro experiments. This study provides a reference for future clinical application of dynamic navigation systems in endodontic surgery. MATERIALS AND METHODS: 3D-printed maxillary anterior teeth were used in the preparation of models for endodontic surgery. Endodontic surgery was performed with and without dynamic navigation by an operator who was proficient in dynamic navigation technology but had no experience in endodontic surgery. Optical scanning data were applied to evaluate the length and angle deviations of root-end resection. And the operation time was recorded. T tests were used to analyze the effect of dynamic navigation technology on the accuracy and duration of endodontic surgery. RESULTS: With dynamic navigation, the root-end resection length deviation was 0.46 ± 0.06 mm, the angle deviation was 2.45 ± 0.96°, and the operation time was 187 ± 22.97 s. Without dynamic navigation, the root-end resection length deviation was 1.20 ± 0.92 mm, the angle deviation was 16.20 ± 9.59°, and the operation time was 247 ± 61.47 s. Less deviation was achieved and less operation time was spent with than without dynamic navigation (P < 0.01). CONCLUSION: The application of a dynamic navigation system in endodontic surgery can improve the accuracy and efficiency significantly for operators without surgical experience and reduce the operation time.

The impact of bone grafting with/without barrier membrane placement on the outcome of apical surgery: A systematic review and meta-analysis.

BACKGROUND: Regenerative techniques are increasingly being advocated in endodontic apical surgery (AS) to enhance the healing of periapical lesions. Various grafting and membrane materials are employed as adjuncts to modern AS. OBJECTIVES: This systematic review aimed to answer the following PICO question: In patients with apical periodontitis (P) what is the impact of bone grafting with/without barrier membrane materials (I) compared with surgery without grafting materials (C) on the outcome of AS evaluated clinically and radiographically (O). METHODS: A systematic search was conducted in four databases (Embase, Web of Science, PubMed and Cochrane Central Register of Controlled Trials) until 1 August 2023. Google Scholar was also manually searched. Studies with a prospective randomized design were included. Cochrane risk-of-bias (RoB) tool 2.0 assessed bias. Two independent reviewers performed the study selection, data extraction and appraisal of studies. Meta-analysis was performed using R3.5.1 software. RESULTS: From the identified 2582 studies, eight randomized clinical trials were included for meta-analysis. Two studies had low RoB, while six had some concerns. Analysis revealed significantly better outcomes when surgery involved bone regeneration techniques than conventional surgery (OR = 2.18, 95% CI: 1.32-4.31, p = .004). Subgroup analyses on individual grafts (OR = 0.22, 95% CI: -0.99 to 1.44, p = .720) (OR = -0.09, 95% CI: -1.42 to 1.23, p = .885) and membranes (OR = -1.09, 95% CI: -2.94 to 0.76, p = .247) and their combinations (OR = 0.03, 95% CI: -1.50 to 1.55, p = .970) did not yield any significant results. The type of membrane used did not significantly impact the outcome (OR = -1.09, 95% CI: -2.94 to 0.76, p = .247) nor did altering the combination of graft/membrane. DISCUSSION: This systematic review examined the effects of bone grafting with/without membrane placement on the outcome of AS. It highlights the potential advantages of regenerative techniques and the need for further research in this area. CONCLUSIONS: Based on current evidence, bone grafting with/without barrier membrane placement significantly improves healing after AS. Subgroup analysis of resorbable membranes or grafting did not significantly influence the outcome. The combination of membrane and graft was also not significant. Future well-designed, randomized controlled trials in this area are essential before these materials can be recommended for routine use to enhance healing outcomes in AS. REGISTRATION: PROSPERO (CRD42021255171).

Further Interventions after Root Canal Treatment Are Most Common in Molars and Teeth Restored with Direct Restorations: A 10-11-Year Follow-Up of the Adult Swedish Population.

INTRODUCTION: The aims were to investigate 1) the frequency of nonsurgical retreatment, root-end surgery, extraction, and further restorative treatment during a follow-up of 10-11 years after root filling and compare the frequencies according to tooth group and type of coronal restoration and 2) the timing of nonsurgical retreatment, root-end surgery, and extraction. METHODS: Data were collected from the Swedish Social Insurance Agency's register. A search for treatment codes identified teeth root filled in 2009 and the type of coronal restoration (direct, indirect, and unspecified) registered within 6 months of root filling. The root-filled teeth were followed 10-11 years, and further interventions were recorded. Descriptive statistics and chi-square tests were used for statistical analysis. RESULTS: In 2009, root fillings were registered for 215,611 individuals/teeth. Nonsurgical retreatment, root-end surgery, and extraction were undertaken in 3.5%, 1.4%, and 20% teeth, respectively. The frequency of further interventions varied with respect to tooth group and type of coronal restoration, but only slightly for endodontic retreatments. Further interventions, except for root-end surgery, were registered more often for molars and directly restored teeth (P < .001). The majority of endodontic retreatments were undertaken within 4 years, while extractions were evenly distributed over 10-11 years. CONCLUSIONS: The frequency numbers of nonsurgical retreatment and root-end surgery were low, despite 1 in 5 root-filled teeth registered as extracted. Further interventions were most common in molars and directly restored teeth. Endodontic retreatments were performed more often during the first 4 years.

Endodontic Microsurgery With an Autonomous Robotic System: A Clinical Report.

INTRODUCTION: Endodontic microsurgery (EMS) requires minimally invasive osteotomy and accurate root-end resection, which can be challenging in many instances. Evidence suggests that autonomous robotic systems can significantly enhance the precision of dental implantation. The aim of this case report is to introduce a novel EMS technique that employs robot-guided osteotomy and root resection procedures. METHODS: A 59-year-old man was diagnosed with previously treated, symptomatic apical periodontitis in the mandibular left first molar. Patient data were used to integrate a digital model into preoperative planning software to design the surgical plan. The robotic system utilizes spatial alignment techniques for registration, guiding the robotic arm to autonomously perform a 3-mm osteotomy and root-end resection, based on the surgical plan. After completing the resection, the clinician confirmed the absence of cracks or root fractures and subsequently performed root-end preparation and filling under a microscope. RESULTS: To the best of our knowledge, this case marks the first use of autonomous robotic assistance in EMS. CONCLUSIONS: Utilizing an autonomous robotic system could enable precise apicoectomy in patients with intact cortical plates, thus facilitating successful EMS procedures. This has the potential to minimize errors caused by operator inexperience and mitigate the risks associated with excessive bone removal.

Clinical outcomes of endodontic microsurgery in complicated cases with large or through-and-through lesions: a retrospective longitudinal study.

OBJECTIVES: To investigate the clinical outcomes of endodontic microsurgery in complicated cases presenting with large or through-and-through lesions. MATERIALS AND METHODS: We retrospectively collected and analyzed preoperative, intraoperative, and follow-up data from 143 complicated cases that underwent endodontic microsurgery. Clinical outcomes were assessed in terms of tooth survival and surgery success. Cox regression analysis was used to evaluate the survival rate and identify associated risk factors. Additionally, the success rate was compared across different postoperative periods, and potential factors contributing to surgical failure were identified through binary logistic regression. RESULTS: The overall survival and success rates were 93.0% and 91.7%, respectively. The Cox regression model identified four risk factors affecting tooth survival, including apicoectomy of four teeth (HR = 35.488; P = 0.0002), an open apex observed on preoperative radiographs (HR = 6.300; P = 0.025), the performance of guided tissue regeneration technique (HR = 8.846; P = 0.028), and a palatal surgical approach (HR = 8.685; P = 0.030). The success rate demonstrated an initial increase in the early postoperative period (from 0.5 to 2 years; P = 5.8124e-30), followed by stabilization (from 2 to 9 years; P = 0.298). Surgery success rate significantly declined when apicoectomy involved four teeth (OR = 109.412; P = 0.002). CONCLUSIONS: Endodontic microsurgery demonstrates satisfactory outcomes in complicated cases, maintaining a stable success rate after two years. However, tooth survival and surgery success are significantly compromised when apicoectomy involves four teeth. Factors such as guided tissue regeneration, an open apex, and the palatal surgical approach are associated with an increased risk of tooth extraction. CLINICAL RELEVANCE: Despite achieving acceptable outcomes in complicated cases, endodontic microsurgery is adversely affected by the apicoectomy of four teeth.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth.

BACKGROUND: High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods. MATERIALS AND METHODS: Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery. RESULTS: The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff. CONCLUSIONS: The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

Dynamically guided transantral piezoelectric endodontic microsurgery: A case report with technical considerations.

AIM: Endodontic microsurgery (EMS) of maxillary molars may represent a complex challenge to the clinician due to the location of the roots and the proximity of the maxillary sinus floor. This report aimed to describe the simultaneous use of a computer-assisted dynamic navigation (C-ADN) system and piezoelectric bony-window osteotomy for the transantral microsurgical approach of a maxillary left first molar with adequate root canal filling and symptomatic apical periodontitis. SUMMARY: This case report highlights the importance of C-ADN to carry out a minimally invasive buccal surgical access to palatal roots affected by apical periodontitis and provides a practical example to help clinicians make treatment decisions based on the available evidence. Clinical and tomographic evaluations were performed before the surgical procedure and at 24-month follow-up. This case was treated using a C-ADN system fitted to a piezotome for the buccal approach of the buccal roots, maxillary sinus membrane lifting, and for transantral location, root-end resection, cavity preparation, and filling of the palatal root. The navigation system allowed to achieve an accurate apical canal terminus location and root-end filling of the three roots with a minimally invasive piezoelectric crypt approach. At the 24-month follow-up examination, the patient remains asymptomatic, with normal periapical structures, and regeneration of maxillary sinus walls. It was concluded that the combination of dynamic navigation with piezoelectric bony-window osteotomy offers enhanced accuracy, tissue preservation, diminished risk of iatrogenic complications, and could maximize success and survival rates in transantral EMS.

Effectiveness evaluation of autotransplanted teeth after performing extraoral endodontic surgery instead of conventional root canal therapy.

PURPOSE: The aim of this study was to examine the viability and efficacy of utilizing extraoral apicoectomy and retrograde filling in combination to seal the root canal system of mature molars without the need for root canal therapy (RCT) during the autotransplantation of teeth (ATT). MATERIALS AND METHODS: This study screened 27 patients who received ATT at the Department of Oral Surgery in the Hospital of Stomatology from 2019 to 2021. Extraoral apicoectomy and retrograde filling were performed, while RCT was temporarily not performed. The study analysed the periodontal status and masticatory function of transplanted teeth one to three years postoperation and used cone-beam computed tomography (CBCT) and periapical radiograph (PA) to evaluate the integrity of the periodontal space and intra/periapical inflammation. The potential predictors of survival/success were analysed statistically. We also conducted questionnaires and chewing efficiency tests. RESULTS: In this study, 27 TTs from 27 patients were found to be fully functional in terms of chewing ability. The overall survival rate was 100% (27/27), and the success rate was 70.4% (19/27). A total of 90.9% (20/22) of patients reported being satisfied or very satisfied with their TTs. Additionally, the chewing efficiency of the transplantation side was on average 82.0% of that of the healthy side, with a significant difference between the two sides (P < 0.05). None of the potential predictors were found to significantly affect the success or survival of the transplanted tooth (TT). CONCLUSION: The combination of extraoral apicoectomy and retrograde filling in TT showed promising outcomes, but further clinical cases and longer follow-up times are still required to validate the treatment plan.

Prevalencia de cristales de colesterol en granulomas perirradiculares de origen endodóntico / Prevalence of cholesterol crystals in periradicular granulomas of endodontic origin

Objetivos: Identificar y determinar la prevalencia de cristales de colesterol (CRCo) en granulomas perirradiculares de origen endodóntico y el tipo de reacción que provocan en los tejidos circundantes. Material y métodos: Se estudiaron con microscopía óptica 75 preparados histológicos de archivo pertenecientes a lesiones perirradiculares humanas correspondientes a piezas dentarias que habían recibido un tratamiento endodóntico pre- vio y que, según los informes que acompañaban las muestras, habían sido obtenidas mediante una apicectomía. Del total, 68 muestras fueron diagnosticadas como granulomas, mientras que los 7 restantes se diagnosticaron como quistes inflamato- rios y fueron descartadas. Resultados: 39 granulomas pertenecían a pacientes de sexo femenino con presencia de CRCo en el 58,97% de los ca- sos. Los 29 granulomas restantes pertenecían al sexo mascu- lino y presentaron CRCo en un 41,37%. La mayor proporción de CRCo fue hallada en granulomas pertenecientes a pacien- tes mayores de 62 años. Los CRCo se observaron rodeados de macrófagos y células gigantes multinucleadas, provocando una reacción a cuerpo extraño. También se observaron células espumosas en áreas circundantes. Conclusiones: La presencia de CRCo en granulomas perirradiculares de origen endodóntico provoca una reacción a cuerpo extraño que puede interferir con el proceso de re- paración posendodóntico especialmente en pacientes de edad avanzada (AU)

Aim: Identify and determine the prevalence of cholester- ol crystals (CRCo) in periradicular granulomas of endodontic origin and the type of reaction they produce in the surround- ing tissues. Material and methods: 75 archival histological preparations were studied with optical microscopy. They be- longed to human periradicular lesions corresponding to teeth that had received a previous endodontic treatment and that, according to the reports accompanying the samples, had been obtained by an apicoectomy. Of the total, 68 samples were diagnosed as granulomas, while the remaining 7 were diag- nosed as inflammatory cysts and were discarded. Results: 39 granulomas corresponded to female patients in which the presence of CRCo was observed in 58.97% of the cases. The remaining 29 granulomas were from male patients and showed CRCo in 41.37% of the cases. The highest pro- portion of CRCo was found in patients over 62 years of age. The CRCo were surrounded by macrophages and multinucle- ated giant cells causing a foreign body reaction. Foam cells were also observed in the surrounding areas. Conclusions: The presence of CRCo in periradicular granulomas of endodontic origin could be a factor interfering with periapical healing after conventional endodontic thera- py, especially in elderly patients (AU)

Piezoelectric Device and Dynamic Navigation System Integration for Bone Window-Guided Surgery.

INTRODUCTION: This study investigates the feasibility of integrating a piezoelectric device (PIEZO) into a dynamic navigation system (DNS) for bone-window guided surgery. It compares the accuracy and efficiency of PIEZO + DNS to PIEZO + Freehand (FH) procedure for bone-window cutting and root-end resection (RER). METHODS: Forty-eight mandibular molars of 3D-printed surgical jaw models were divided into two groups: PIEZO + DNS (n = 24) and PIEZO + FH (n = 24). Cone-beam computed tomography scans were taken before and after the procedure. The procedure was virtually planned on X-guide software. The bone-window cutting and RER were conducted with a PIEZO under dynamic navigation in the PIEZO + DNS group and using the dental operating microscope in the PIEZO + FH group. The 2D- and 3D-accuracy deviations and angular deflection were measured for the bone window cut. The root length resected and resection angle were calculated. The bone window cut, RER, total operating time, and number of mishaps were recorded. RESULTS: PIEZO + DNS was more accurate than PIEZO + FH for bone-window cutting, showing fewer 2D and 3D deviations and less angular deflection (P < .05). The resection angle was lower in the PIEZO + DNS (P < .05). The bone-window cut and total operating time were significantly reduced using a DNS (P < .05). There was no difference in the number of mishaps (P > .05). CONCLUSIONS: Within the limitations of this in vitro study, the integration of a PIEZO into a DNS is feasible for bone-window guided surgery. The DNS improved the accuracy and efficiency of bone-window cutting.

Application of platelet-rich fibrin and freeze-dried bone allograft following apicoectomy: A comparative assessment of radiographic healing.

Background: Apicoectomy conceptualizes surgically maintaining a tooth with an endodontic lesion that cannot be resolved by conventional endodontic (re-) treatment. To achieve this, continuous improvement in surgical techniques, materials and instruments is being done to enhance the outcome of periapical endodontic surgeries. The purpose of this study was to compare, radiographically, the healing kinetics of platelet-rich fibrin (PRF) and mineralized freeze-dried bone allograft (FDBA) in patients undergoing apicoectomy. Materials and Methods: Nineteen patients (aged 18-40 years) were included in the study and randomly assigned to groups A or B, where they received PRF or FDBA, respectively. Following apicoectomy, PRF gel and FDBA graft were prepared and placed in the osseous defect followed by placement of PRF membrane for graft stabilization and flap closure. Radiographic follow-up was done at the 1st, 3rd, 6th and 12th months for evaluation of healing using Molven's criteria. Statistical analysis was done with Pearson's and McNemar's Chi-square tests. Results: A highly significant difference (P = 0.002) in radiographic healing was observed at 6 months. Complete healing was observed in 50% of cases in Group A whereas in Group B, none of the cases presented with complete radiographic healing. However, at the end of 12 months, complete radiographic healing was observed in both groups. Conclusion: Our data suggest that PRF accelerates bone healing as compared to FDBA and is both time and cost-efficient.

Guided endodontic surgery - Case series.

This case report describes three cases in which periapical surgeries were carried out using a new surgical endodontic technique by using a three-dimensional (3D) printed template for guided osteotomy and root resection. In Case 1, the data obtained from preoperative CT scan and cast scan were transferred to a surgical planning software. The surgical template was printed using a 3D printer. Using the template, osteotomy and root-end resection were precisely carried out. In Case 2, after CBCT imaging, data were transferred to stereolithography and a 3D model was fabricated. With the help of the 3D model, a template was fabricated using tray material. This guided surgical template minimized the extent of osteotomy and enabled precise targeting of the apex. In Case 3, a preoperative CT scan aided in the fabrication of a surgical 3D template. The template assisted in the precise removal of the overlying cortical bone.

A Cadaver-based Comparison of Sleeve-guided Implant-drill and Dynamic Navigation Osteotomy and Root-end Resections.

INTRODUCTION: This study compared the accuracy and efficiency of fully guided static and dynamic computer-assisted surgical navigation techniques for osteotomy and root-end resection (RER). METHODS: Fifty roots from cadaver heads were divided into two groups: fully guided static computer-assisted endodontic microsurgery (FG sCAEMS) and dynamic computer-assisted endodontic microsurgery (dCAEMS) (all, n = 25). Cone-beam computed tomography scans were taken pre and postoperatively. The osteotomy and RER were planned virtually in the preoperative cone-beam computed tomography scan and guided using 3D-printed surgical guides in the FG sCAEMS and 3D-dynamic navigation system in the dCAEMS. The 2D and 3D deviations and angular deflection were calculated. The osteotomy volume, resected root length, and resection angle were measured. The osteotomy and RER time and the number of procedural mishaps were recorded. RESULTS: FG sCAEMS was as accurate as dCAEMS, with no difference in the 2D and 3D deviation values or angular deflection (P > .05). The osteotomy and RER time were shortened using FG sCAEMS (P < .05). The FG sCAEMS showed a greater number of incomplete RERs than dCAEMS. Osteotomy volume, RER angle, and root length resected were similar in both groups (P > .05). FG sCAEMS and dCAEMS were feasible for osteotomy and RER. CONCLUSIONS: Within the limitations of this cadaver-based study, FG sCAEMS was as accurate as dCAEMS. Both FG sCAEMS and dCAEMS were time-efficient for osteotomy and RER.

Comparative SEM study of the marginal adaptation of MTA and Biodentine after apical resection (in vitro study).

INTRODUCTION: Successful periapical surgery requires appropriate root resection, preparation, and adequate sealing. AIM: The aim of the present study was to assess the marginal adaptation of MTA and Biodentine after apical resection with an Er:YAG laser and a diamond turbine bur using a scanning electron microscope (SEM). MATERIALS AND METHODS: The crown part of forty-eight extracted single-root human teeth was removed, and the root canal length of 15 mm was standardized. The root canals were prepared using rotary Ni-Ti Revo-S files up to an apical stop - AS40 and filled with MTA Fillapex and gutta-percha points (cold lateral condensation). The teeth are divided into 2 main groups: group 1 (n=24) after apical resection with a turbine bur, ultrasonic preparation of the retrograde cavity at 3 mm depth and retrograde obturation with Biodentine and MTA; group 2 (n=24) after apical resection with an Er:YAG laser, ultrasonic preparation of the retrograde cavity at a depth of 3 mm and retrograde obturation with MTA and Biodentine. A SEM was used for assessment of the marginal adaptation of the material to the root dentin. The data was entered into and analyzed with IBM SPSS Statistics 22.0. RESULTS: In the group with apical resection with a turbine bur, a statistically significant difference in the gap size between the material and dentin was found in both materials we studied (MTA and Biodentine). The higher mean value was in MTA (1.72 µm), in Biodentine it was 1.08 µm. In the group with apical resection with Er:YAG laser, no statistically significant difference in the gap size between the material and dentin was found in both studied materials: MTA - 1.88 µm, Biodentine - 1.32 µm. CONCLUSIONS: In the present study, MTA and Biodentine showed good sealing capabilities after apical resection. Biodentine displayed better marginal adaptation when resecting the root tip using a turbine bur. The Er:YAG laser-assisted apical resection shows sealing of the open dentinal tubules around the resected root surface.

Regeneration of a large bony lesion with advanced-platelet rich fibrin: case report / Regeneración de una lesión ósea de gran tamaño con fibrina rica en plaquetas: reporte de caso

Introduction: This case report analyzes the regeneration potential of advanced-platelet rich fibrin (A-PRF) in large bony lesions. Advanced-platelet rich fibrin provides various growth factors which aids in faster healing. Materials and Methods: Patient presented with peri-apical radiolucency. CBCT showed bony radiolucency in teeth 31, 32, 41, 42. A full mouth mucoperiosteal flap was raised and a cyst lining was enucleated. Apicoectomy was done with respect to 31, 32, 41, 42 along with and retrograde with a preparation of APRF clots were placed in the bony cavity. Results: Post-op CBCT at 6 months showed a significant difference in size and bone density of the lesion. Conclusions: Advanced-platelet rich fibrin has shown promising results in reducing the size of bony defect and periapical lesion in this case.

Introducción: Este caso clínico demuestra el potencial de regeneración de la fibrina rica en plaquetas avanzada (A-PRF) en lesiones óseas de gran tamaño. La fibrina rica en plaquetas avanzada proporciona varios factores de crecimiento que ayudan a una curación más rápida. Materiales y Métodos: El paciente se presentó con radiolucencia periapical. Tomografía computarizada de haz cónico mostró radiolucencia ósea en los dientes 31, 32, 41, 42. Se levantó un colgajo mucoperióstico de boca completa y se enucleó el revestimiento del quiste. Se realizó apicectomía con respecto a 31, 32, 41, 42, y se colocó una preparación de APRF se colocaron coágulos en la cavidad ósea. Resultados: La tomografía computarizada de haz cónico postoperatorio a los 6 meses mostró una diferencia significativa en el tamaño y la densidad ósea de la lesión. Conclusión: La fibrina rica en plaquetas avanzada ha mostrado resultados prometedores en la reducción del tamaño del defecto óseo y la lesión periapical en este caso.