Effect of high blood flow on heat distribution and ablation zone during microwave ablation-numerical approach.

Microwave ablation has become a viable alternative for cancer treatment for patients who cannot undergo surgery. During this procedure, a single-slot coaxial antenna is employed to effectively deliver microwave energy to the targeted tissue. The success of the treatment was measured by the amount of ablation zone created during the ablation procedure. The significantly large blood vessel placed near the antenna causes heat dissipation by convection around the blood vessel. The heat sink effect could result in insufficient ablation, raising the risk of local tumor recurrence. In this study, we investigated the heat loss due to large blood vessels and the relationship between blood velocity and temperature distribution. The hepatic artery, with a diameter of 4 mm and a height of 50 mm and two branches, is considered in the computational domain. The temperature profile, localized tissue contraction, and ablation zones were simulated for initial blood velocities 0.05, 0.1, and 0.16 m/s using the 3D Pennes bio-heat equation, temperature-time dependent model, and cell death model, respectively. Temperature-dependent blood velocity is modeled using the Navier-Stokes equation, and the fluid-solid interaction boundary is treated as a convective boundary. For discretization, we utilized H curl Ω elements for the wave propagation model, H 1 Ω elements for the Pennes bio-heat model, and H 1 Ω 3 × L 0 2 Ω elements for the Navier-Stokes equation, where Ω represents the computational domain. The simulated results show that blood vessels and blood velocity have a significant impact on temperature distribution, tissue contraction, and the volume of the ablation zone.

Computational study of a novel catheter for liver radioembolization.

Radioembolization (RE) is a medical treatment for primary and secondary liver cancer that involves the transcatheter intraarterial delivery of micron-sized and radiation-emitting microspheres, with the goal of improving microsphere deposition in the tumoral bed while sparing healthy tissue. An increasing number of in vitro and in silico studies on RE in the literature suggest that the particle injection velocity, spatial location of the catheter tip and catheter type are important parameters in particle distribution. The present in silico study assesses the performance of a novel catheter design that promotes particle dispersion near the injection point, with the goal of generating a particle distribution that mimics the flow split to facilitate tumour targeting. The design is based on two factors: the direction and the velocity at which particles are released from the catheter. A series of simulations was performed with the catheter inserted at an idealised hepatic artery tree with physiologically realistic boundary conditions. Two longitudinal microcatheter positions in the first generation of the tree were studied by analysing the performance of the catheter in terms of the outlet-to-outlet particle distribution and split flow matching. The results show that the catheter with the best performance is one with side holes on the catheter wall and a closed frontal tip. This catheter promotes a flow-split-matching particle distribution, which improves as the injection crossflow increases.

An Orthotopic Liver Transplantation Patient Survived Without Hepatic Artery Flow Due to Thrombosis: A Case Report.

BACKGROUND: Hepatic artery thrombosis (HAT), a serious complication after orthotopic liver transplantation, almost always leads to morbidity and mortality without urgent revascularization or retransplantation, especially if HAT occurs within a few days after transplantation. CASE PRESENTATION: Herein we describe a case report of an orthotopic liver transplantation patient surviving without hepatic artery flow due to HAT on postoperative day 1. Reanastomosis, thrombectomy, and intra-arterial thrombolysis were performed, but only retrograde arterial flow by Doppler ultrasound, not by angiography, could be demonstrated in the hepatic artery. This case report is in compliance with the Declaration of Helsinki and the Declaration of Istanbul. CONCLUSION: Based on the evidence from this patient, we believe that patients with failed revascularization can experience a long-term survival with conservative treatment. Retransplantation should be evaluated based on laboratory findings because graft function in individual patients can recover.

Pediatric living donor left lateral segment liver transplantation for biliary atresia: Doppler ultrasound findings in early postoperative period.

PURPOSE: To analyze hepatic hemodynamic parameters detected by Doppler ultrasound (DU) of uncomplicated children with biliary atresia who underwent left lateral segment living donor liver transplantation (LLS-LDLT), explore its normal change trend over time and determine the normal reference interval. METHODS: We retrospectively involved the data from 227 biliary atresia patients (100 Males,127 Females). Hemodynamic parameters include peak systolic velocity (PSV), end-diastolic velocity (EDV), resistivity index (RI), and pulsation index (PI) of the hepatic artery (HA), portal vein velocity (PVV), portal vein flow (PVF) and hepatic vein velocity (HVV) during intra-operative and on the 1st, 3rd, 5th and 7th day after operation were collected. Repeated measures analysis of the variance and Friedman test were used to analyze the changing trend of hemodynamic parameters over time in the first week after the operation. RESULTS: PSVHA and EDVHA showed a similar changing tendency at one week after surgery, with an overall decrease-rise trend; RIHA and PIHA also changed similarly with an overall rise-decrease trend. The HVV and PVV at surgery were lower than at all time points after surgery. As for PVF, the value of POD5 was the highest and then decreased. Additionally, this study provided the normal reference interval of hemodynamic parameters for LLS-LDLT patients, which were PSVHA: 18.4-98.3 cm/s, EDVHA: 0-43.3 cm/s, RIHA: 0.41-1.0, PIHA: 0.51-2.0, PVV: 19.0-83.7 cm/s, HVV: 19.4-68.0 cm/s, and PVF:99.5-500.0 ml/min/100 g at intraoperation. Within the first postoperative week: PSVHA: 21.0-97.7 cm/s, EDVHA: 0-32.7 cm/s, RIHA: 0.47-1.0, PIHA: 0.62-2.0, PVV: 23.0-92.0 cm/s, HVV: 19.7-86.0 cm/s, and PVF: 100.0-513.0 ml/min/100 g. CONCLUSION: The hepatic hemodynamic of post-transplanted children detected by DU had specific changing trends and normal ranges, which provides valuable reference values for ultrasonologists and pediatric transplant clinicians.

On the importance of spiral-flow inflow boundary conditions when using idealized artery geometries in the analysis of liver radioembolization: A parametric study.

In the last decades, the numerical studies on hemodynamics have become a valuable explorative scientific tool. The very first studies were done over idealized geometries, but as numerical methods and the power of computers have become more affordable, the studies tend to be patient specific. We apply the study to the numerical analysis of tumor-targeting during liver radioembolization (RE). RE is a treatment for liver cancer, and is performed by injecting radiolabeled microspheres via a catheter placed in the hepatic artery. The objective of the procedure is to maximize the release of radiolabeled microspheres into the tumor and avoid a healthy tissue damage. Idealized virtual arteries can serve as a generalist approach that permits to separately analyze the effect of a variable in the microsphere distribution with respect to others. However, it is important to use proper physiological boundary conditions (BCs). It is not obvious, the need to account for the effect of tortuosity when using an idealized virtual artery. We study the use of idealized geometry of a hepatic artery as a valid research tool, exploring the importance of using realistic spiral-flow inflow BC. By using a literature-based cancer scenario, we vary two parameters to analyze the microsphere distribution through the outlets of the geometry. The parameters varied are the type of microspheres injected and the microsphere injection velocity. The results with realistic inlet velocity profile showed that the particle distribution in the liver segments is not affected by the analyzed injection velocity values neither by the particle density. NOVELTY STATEMENT: In this article, we assessed the use of idealized geometries as a valid research tool and applied the use of an idealized geometry to the case of an idealized hepatic artery to study the particle-hemodynamics during radioembolization (RE). We studied three different inflow boundary conditions (BCs) to assess the usefulness of the geometry, two types of particle injection velocities and two types of commercially available microspheres for RE treatment. In recent years, the advent in computational resources allowed for more detailed patient-specific geometry generation and discretization and hemodynamics simulations. However, general studies based on idealized geometries can be performed in order to provide medical doctors with some basic and general guidelines when using a given catheter for a given cancer scenario. Moreover, using an idealized geometry can be a reasonable approach which allows us to isolate a given parameter and control other parameters, so that parameters can be independently assessed. Even though an idealized geometry does not match any patient's geometry, the use of an idealized geometry can be valid when drawing general conclusions that may be useful in patient-specific cases. However, we believe that even if an idealized hepatic artery geometry is used for the study, it is necessary to account for the upstream and downstream tortuosity of vessels through the BCs. In this work, we highlighted the need of modeling the tortuosity of upstream and downstream vasculatures through the BCs.

Model Assisted Analysis of the Hepatic Arterial Buffer Response During Ex Vivo Porcine Liver Perfusion.

OBJECTIVE: The hepatic arterial buffer response is a well-known phenomenon in hepatic circulation, describing the response of hepatic arterial resistance to changes in portal vein flow. Several vasoactive metabolites underlying its mechanism have been proposed, however, there is currently no clear consensus. The aim of this study is to investigate the hepatic arterial buffer response of porcine livers preserved in a controlled ex vivo perfusion machine. METHODS: Porcine livers are perfused on an ex vivo perfusion machine and hemodynamic experiments investigating the hepatic arterial resistance response to portal vein flow and vena cava pressure variations are conducted. A simple hemodynamic model is developed to support the interpretation of the received measurements. Further, a mechanism is proposed that explains hepatic arterial resistance changes in response to vena cava pressure as myogenic and in response to portal vein flow as a combined washout and myogenic effect. RESULTS: A clear correlation between hepatic sinusoidal pressure levels and hepatic arterial resistance is observed where an increase of approximately 4 mmHg of hepatic sinusoidal pressure level results in doubling of the hepatic arterial resistance. This relation is considered during the analysis of the portal vein flow variations resulting in a reduced isolated effect of adenosine washout on hepatic arterial resistance. With an average buffer capacity of 27% during our experiments, the hepatic arterial buffer response shows to be unimpaired in the ex vivo scenario. CONCLUSION: First, washout and myogenic effects both influence the hepatic arterial buffer response; and second, hepatic sinusoidal pressure levels strongly influence the hepatic arterial resistance. SIGNIFICANCE: These results present new findings in hemodynamics of the liver, which are fundamental for successful ex vivo liver perfusion.

Impact of human-derived hemoglobin based oxygen vesicles as a machine perfusion solution for liver donation after cardiac death in a pig model.

The recent clinical application of perfusion technology for the machine preservation of donation after cardiac death (DCD) grafts has some advantages. Oxygenation has been proposed for the preservation of DCD liver grafts. The aim of this study is to clarify whether the use of HbV-containing preservation solution during the subnormothermic machine perfusion (SNMP) of the liver graft improves the graft function of DCD porcine livers in an ex vivo reperfusion model. Pig livers were excised after 60 minutes of warm ischemic time and were preserved under one of three preservation conditions for 4 hours. The preservation conditions were as follows: 4°C cold storage (CS group; N = 5), Hypothermic machine preservation (HMP) with UW gluconate solution (HMP group; N = 5), SNMP (21°C) with UW gluconate solution (SNMP group; N = 5), SNMP (21°C) with HbVs (Hb; 1.8 mg/dl) perfusate (SNMP+HbV group; N = 5). Autologous blood perfusion was performed for 2 hours in an isolated liver reperfusion model (IRM). The oxygen consumption of the SNMP and SNMP+HbV group was higher than the HMP groups (p < 0.05). During the reperfusion, the AST level in the SNMP+HbV group was lower than that in the CS, HMP and SNMP groups. The changes in pH after reperfusion was significantly lower in SNMP+HbV group than CS and HMP groups. The ultrastructural findings indicated that the mitochondria of the SNMP+HbV group was well maintained in comparison to the CS, HMP and SNMP groups. The SNMP+HbVs preservation solution protected against metabolic acidosis and preserved the liver function after reperfusion injury in the DCD liver.

Quantitative study of liver hemodynamic changes in rats with small-for-size syndrome by the 4D-CT perfusion technique.

OBJECTIVE: The microcirculatory hemodynamic changes of small-for-size syndrome (SFSS) are still unclear. In this study, they were investigated by four-dimensional CT perfusion (4D-CTP) technique. METHODS: The sham group, 50, 60, 70 and 80 % partial hepatectomy (PH) rat groups were established. At 1 hour (1 h), 1 day (1 d), 3 days (3 d) and 7 days (7 d) post-operation, serological examination, 4D-CTP scan and histopathological examination were performed. One-way analysis of variance and the Kruskal-Wallis test were used for the comparison. RESULTS: Based on the diagnostic criteria of SFSS, the 80 % group was considered to be a successful model. In all the PH groups, portal vein perfusion and total liver perfusion peaked at 1 h and declined at 1d and 3d. Both portal vein perfusion and total liver perfusion were significantly higher in the 80 % group than the sham group, 50 and 60% groups at 1 h (p < 0.05), and 80 % group at 3d and 7d (p < 0.05). In the 50 and 60 % groups, hepatic artery perfusion decreased at 1 h and maintained at a lower level until at 7 d; whereas, in the 70 and 80% groups, it increased at 1 h, then decreased and reached the lowest level at 7 d. No significant difference appeared in hepatic artery perfusion between any two groups at any time points. At all time points, hepatic perfusion index was lower in all the PH groups than the sham group. Significant differences in hepatic perfusion index appeared between the 80% group and the sham group at 1 h and 1 d (p < 0.05). CONCLUSIONS: The CTP parameters quantitatively revealed the microcirculatory hemodynamic changes in SFSS, which were further confirmed to be associated with histopathological injury. It is suggested that the hemodynamic changes in SFSS remnant liver can provide useful information for further revealing the mechanism of SFSS and may help for guiding the treatments. ADVANCES IN KNOWLEDGE: By using the 4D-CTP technique, the hepatic microcirculatory hemodynamic changes could be quantitatively measured in vivo for small animal research.

Modeling sphere dynamics in blood vessels for SIRT pre-planning - To fathom the potential and limitations.

For selective internal radiation therapy (SIRT) the calculation of the 3D distribution of spheres based on individual blood flow properties is still an open and relevant research question. The purpose of this work is to develop and analyze a new treatment planning method for SIRT to calculate the absorbed dose distribution. For this intention, flow dynamics of the SIRT-spheres inside the blood vessels was simulated. The challenge is treatment planning solely using high-resolution imaging data available before treatment. The resolution required to reliably predict the sphere distribution and hence the dose was investigated. For this purpose, arteries of the liver were segmented from a contrast-enhanced angiographic CT. Due to the limited resolution of the given CT, smaller vessels were generated via a vessel model. A combined 1D/3D-flow simulation model was implemented to simulate the final 3D distribution of spheres and dose. Results were evaluated against experimental data from Y90-PET. Analysis showed that the resolution of the vessels within the angiographic CT of about 0.5mm should be improved to a limit of about 150µm to reach a reliable prediction.

Numerical investigation of the effect of vessel size and distance on the cryosurgery of an adjacent tumor.

Cryosurgery is an efficient cancer treatment which can be used for non-invasive ablation of some internal tumors such as liver and prostate. Tumors are usually located near the large blood vessels and the heat convection may affect the progression of the ice ball. Hence it is necessary to predict the surgery procedure and its consequences earlier. In spite of the recent studies it is still unclear that which arteries will significantly affect the freezing treatment of tumors and which can be ignored. Therefore a numerical model of a spherical 3 cm diameter liver tumor, subjected to cryosurgery was developed. The specific thermophysical properties were applied to the tumor and healthy tissues in frozen and unfrozen states. A simplified Hepatic artery with different anatomical diameters was placed in different positions relative to the tumor and energy and momentum equations were solved. The temperature distribution and the shape of the resultant ice ball were discussed. The results showed that a 4 mm diameter artery in the vicinity of a tumor will increase the minimum temperature achieved at the tumor boundary by 12.5 °C and therefore significantly affects the cryosurgery outcome. This may cause insufficient freezing which leads to incomplete death of tumor cells, failure of the surgery and tumor regenesis. Eventually it was shown that injection of gold and Fe3O4 nanoparticles to the surrounding tissue of the artery can enhance the heat transfer and progression of the ice ball, making temperature distribution similar to the no vessel state. Development of computational models can provide the physicians an applicable tool which helps them recognize how efficient a treatment method will be for a specific case and design a suitable cryosurgery plan.

Numerical zero-dimensional hepatic artery hemodynamics model for balloon-occluded transarterial chemoembolization.

Balloon-occluded transarterial chemoembolization (B-TACE) is a valuable treatment option for patients with inoperable malignant tumors in the liver. Balloon-occluded transarterial chemoembolization consists of the transcatheter infusion of an anticancer drug mixture and embolic agents. Contrary to conventional TACE, B-TACE is performed via an artery-occluding microballoon catheter, which makes the blood flow to redistribute due to the intra- and extrahepatic arterial collateral circulation. Several recent studies have stressed the importance of the redistribution of blood flow in enhancing the treatment outcome. In the present study, the geometries of a representative hepatic artery and the communicating arcades (CAs) are modeled. An in silico zero-dimensional hemodynamic model is created by characterizing the geometry and the boundary conditions and then is validated in vitro. The role of CAs is assessed by combining 2 cancer scenarios and 2 catheter locations. The importance of the diameter of the CAs is also studied. Results show that occluding a main artery leads to collateral circulation and CAs start to play a role in blood-flow redistribution. In summary, numerical zero-dimensional simulations permit a fast and reliable approach for exploring the blood-flow redistribution caused by the occlusion of a main artery, and this approach could be used during B-TACE planning.

Changes in liver perfusion and function before and after percutaneous occlusion of spontaneous portosystemic shunt.

PURPOSE: To evaluate changes in liver perfusion after occlusion of spontaneous portosystemic shunt and to analyze mechanisms of liver profile improvement. MATERIALS AND METHODS: Liver function changes and portal venous and hepatic arterial blood flow were evaluated using perfusion CT before and after shunt occlusion in 23 patients who underwent percutaneous occlusion of spontaneous portosystemic shunt because of gastric varices (n = 15) or hepatic encephalopathy (n = 8). RESULTS: Portal venous blood flow was significantly higher at 1 week (278.7 ml/min, 92.7-636.7, p = 0.012), 1 month (290.0 ml/min, 110.1-560.1, p < 0.001) and 3 months (299.6 ml/min, 156.7-618.5, p = 0.033) after shunt occlusion than the baseline (220.9 ml/min, 49.5-566.7). Hepatic arterial liver blood flow became lower than the baseline (132.3 ml/min, 47.9-622.3) after shunt occlusion, but a significant decrease was observed only at 1 month later (107.9 ml/min, 45.8-263.6 p = 0.027). Serum albumin concentration became significantly higher than the baseline (3.4 mg/dl, 1.9-4.5) at 1 month (3.8 mg/dl, 2.3-4.3, p = 0.018) and 3 months (3.9 mg/dl, 2.6-4.3, p = 0.024) after shunt occlusion. CONCLUSION: Shunt occlusion increases portal venous blood flow and decreases hepatic arterial blood flow, thereby improving the liver profile.

Computational particle-haemodynamics analysis of liver radioembolization pretreatment as an actual treatment surrogate.

Liver radioembolization (RE) is a treatment option for patients with unresectable and chemorefractory primary and metastatic liver tumours. RE consists of intra-arterially administering via catheter radioactive microspheres that locally attack the tumours, sparing healthy tissue. Prior to RE, the standard practice is to conduct a treatment-mimicking pretreatment assessment via the infusion of 99m Tc-labelled macroaggregated albumin microparticles. The usefulness of this pretreatment has been debated in the literature, and thus, the aim of the present study is to shed light on this issue by numerically simulating the liver RE pretreatment and actual treatment particle-haemodynamics in a patient-specific hepatic artery under two different literature-based cancer scenarios and two different placements of a realistic end-hole microcatheter in the proper hepatic artery. The parameters that are analysed are the following: microagent quantity and size (accounting for RE pretreatment and treatment), catheter-tip position (near the proper hepatic artery bifurcation and away from it), and cancer burden (10% and 30% liver involvement). The conclusion that can be reached from the simulations is that when it comes to mimicking RE in terms of delivering particles to tumour-bearing segments, the catheter-tip position is much more important (because of the importance of local haemodynamic pattern alteration) than the infused microagents (i.e. quantity and size). Cancer burden is another important feature because the increase in blood flow rate to tumour-bearing segments increases the power to drag particles. These numerical simulation-based conclusions are in agreement with clinically observed events reported in the literature. Copyright © 2016 John Wiley & Sons, Ltd.

Partial hepatectomy hemodynamics changes: Experimental data explained by closed-loop lumped modeling.

The liver function may be degraded after partial liver ablation surgery. Adverse liver hemodynamics have been shown to be associated to liver failure. The link between these hemodynamics changes and ablation size is however poorly understood. This article proposes to explain with a closed-loop lumped model the hemodynamics changes observed during twelve surgeries in pigs. The portal venous tree is modeled with a pressure-dependent variable resistor. The variables measured, before liver ablation, are used to tune the model parameters. Then, the liver partial ablation is simulated with the model and the simulated pressures and flows are compared with post-operative measurements. Fluid infusion and blood losses occur during the surgery. The closed-loop model presented accounts for these blood volume changes. Moreover, the impact of blood volume changes and the liver lobe mass estimations on the simulated variables is studied. The typical increase of portal pressure, increase of liver pressure loss, slight decrease of portal flow and major decrease in arterial flow are quantitatively captured by the model for a 75% hepatectomy. It appears that the 75% decrease in hepatic arterial flow can be explained by the resistance increase induced by the surgery, and that no hepatic arterial buffer response (HABR) mechanism is needed to account for this change. The different post-operative states, observed in experiments, are reproduced with the proposed model. Thus, an explanation for inter-subjects post-operative variability is proposed. The presented framework can easily be adapted to other species circulations and to different pathologies for clinical hepatic applications.

Numerical investigation of liver radioembolization via computational particle-hemodynamics: The role of the microcatheter distal direction and microsphere injection point and velocity.

Liver radioembolization is a treatment option for patients with primary and secondary liver cancer. The procedure consists of injecting radiation-emitting microspheres via an intra-arterially placed microcatheter, enabling the deposition of the microspheres in the tumoral bed. The microcatheter location and the particle injection rate are determined during a pretreatment work-up. The purpose of this study was to numerically study the effects of the injection characteristics during the first stage of microsphere travel through the bloodstream in a patient-specific hepatic artery (i.e., the near-tip particle-hemodynamics and the segment-to-segment particle distribution). Specifically, the influence of the distal direction of an end-hole microcatheter and particle injection point and velocity were analyzed. Results showed that the procedure targeted the right lobe when injecting from two of the three injection points under study and the remaining injection point primarily targeted the left lobe. Changes in microcatheter direction and injection velocity resulted in an absolute difference in exiting particle percentage for a given liver segment of up to 20% and 30%, respectively. It can be concluded that even though microcatheter placement is presumably reproduced in the treatment session relative to the pretreatment angiography, the treatment may result in undesired segment-to-segment particle distribution and therefore undesired treatment outcomes due to modifications of any of the parameters studied, i.e., microcatheter direction and particle injection point and velocity.

Computational assessment of the effects of the catheter type on particle-hemodynamics during liver radioembolization.

Radioembolization, which consist of the implantation of radioactive microspheres via intra-arterially placed microcatheter, is a safe and effective treatment for liver cancer. Nevertheless, radioembolization-related complications and side effects may arise, which are an active area of ongoing research. The catheter design has been claimed as an option in reducing these complications. In this paper, the influence of catheter type and location are investigated. The study was undertaken by numerically simulating the particle-hemodynamics in a patient-specific hepatic artery during liver radioembolization. The parameters modified were cancer scenario (30% liver involvement in the right lobe, 'scenario A', and in both lobes, 'scenario B'), catheter type (standard end-hole microcatheter, SMC, and antireflux catheter, ARC), and the location of the tip in the proper hepatic artery (in the straight part, 'inlet', and near the bifurcation, 'bifurcation'). Comparing ARC with SMC, the maximum and average (over segments) absolute difference in the percentage of particles that reached each segment were 19.62% and 9.06% when injecting near the inlet for scenario A; 3.54% and 1.07% injecting near the bifurcation for scenario A; and 18.31% and 11.85% injecting near the inlet for scenario B. It seems, therefore, that the location of the catheter tip in the artery is crucial in terms of particle distribution. Moreover, even though the near-tip blood flow was altered due to the presence of a catheter, the particle distribution matched the flow split if the distance between the injection point and the first bifurcation encountered enabled the alignment of particles with blood flow.

Simulation Model of Microsphere Distribution for Selective Internal Radiation Therapy Agrees With Observations.

PURPOSE: To perform a detailed analysis of microsphere distribution in biopsy material from a patient treated with (90)Y-labeled resin spheres and characterize microsphere distribution in the hepatic artery tree, and to construct a novel dichotomous bifurcation model for microsphere deposits and evaluate its accuracy in simulating the observed microsphere deposits. METHODS AND MATERIALS: Our virtual model consisted of arteries that successively branched into 2 new generations of arteries at 20 nodes. The artery diameter exponentially decreased from the lowest generation to the highest generation. Three variable parameters were optimized to obtain concordance between simulations and measure microsphere distributions: an artery coefficient of variation (ACV) for the diameter of all artery generations and the microsphere flow distribution at the nodes; a hepatic tree distribution volume (HDV) for the artery tree; and an artery diameter reduction (ADR) parameter. The model was tested against previously measured activity concentrations in 84 biopsies from the liver of 1 patient. In 16 of 84 biopsies, the microsphere distribution regarding cluster size and localization in the artery tree was determined via light microscopy of 30-µm sections (mean concentration, 14 microspheres/mg; distributions divided into 3 groups with mean microsphere concentrations of 4.6, 14, and 28 microspheres/mg). RESULTS: Single spheres and small clusters were observed in terminal arterioles, whereas large clusters, up to 450 microspheres, were observed in larger arterioles. For 14 microspheres/mg, the optimized parameter values were ACV=0.35, HDV = 50 cm(3), and ADR=6 µm. For 4.6 microspheres/mg, ACV and ADR decreased to 0.26 and 0 µm, respectively, whereas HDV increased to 130 cm(3). The opposite trend was observed for 28 microspheres/mg: ACV = 0.49, HDV = 20 cm(3), and ADR = 8 µm. CONCLUSION: Simulations and measurements reveal that microsphere clusters are larger and more common in volumes with high microsphere concentrations and indicate that the spatial distribution of the artery tree must be considered in estimates of microsphere distributions.

Liver cancer arterial perfusion modelling and CFD boundary conditions methodology: a case study of the haemodynamics of a patient-specific hepatic artery in literature-based healthy and tumour-bearing liver scenarios.

Some of the latest treatments for unresectable liver malignancies (primary or metastatic tumours), which include bland embolisation, chemoembolisation, and radioembolisation, among others, take advantage of the increased arterial blood supply to the tumours to locally attack them. A better understanding of the factors that influence this transport may help improve the therapeutic procedures by taking advantage of flow patterns or by designing catheters and infusion systems that result in the injected beads having increased access to the tumour vasculature. Computational analyses may help understand the haemodynamic patterns and embolic-microsphere transport through the hepatic arteries. In addition, physiological inflow and outflow boundary conditions are essential in order to reliably represent the blood flow through arteries. This study presents a liver cancer arterial perfusion model based on a literature review and derives boundary conditions for tumour-bearing liver-feeding hepatic arteries based on the arterial perfusion characteristics of normal and tumorous liver segment tissue masses and the hepatic artery branching configuration. Literature-based healthy and tumour-bearing realistic scenarios are created and haemodynamically analysed for the same patient-specific hepatic artery. As a result, this study provides boundary conditions for computational fluid dynamics simulations that will allow researchers to numerically study, for example, various intravascular devices used for liver disease intra-arterial treatments with different cancer scenarios. Copyright © 2016 John Wiley & Sons, Ltd.

Solid Tumor Embolotherapy in Hepatic Arteries with an Anti-reflux Catheter System.

Unresectable hepatoma accounts for the majority of malignant liver tumor cases for which embolization therapy is considered a viable treatment option. However, the potential risk of aberrant particle deposition in non-target regions could cause severe side-effects, alongside diminished efficacy. A computational model has been developed to analyze the particle-hemodynamics before and after deployment of an FDA-approved anti-reflux catheter. The catheter features a retractable, porous cone-like tip designed to allow forward blood flow while preventing microsphere reflux. A patient-specific hepatic artery system, with different daughter branches connected to a liver tumor, was chosen as a representative test bed. In vitro as well as in vivo measurements were used to validate the computer simulation model. The model captures the effect of tip-deployment on blood perfusion and pressure drop in an interactive manner under physiologically realistic conditions. A relationship between the pressure drop and embolization level was established, which can be used to provide clinicians with real-time information on the best infusion-stop point. However, the results show that the present procedure for embolization of downstream vessels which feed a tumor is quite arbitrary. Nevertheless, a method to recycle aberrant particles captured by the deployed tip was proposed to minimize side-effects.

The Correlation of Hepatic and Systemic Hemodynamics During Liver Transplantation: Quantification of Hepatic Resistance as an Actual Value.

The correlation between portal vein pressure (PVP) and flow (PVF) has not been established, and there is still lack of consensus about the optimal hemodynamics during liver transplantation (LT). We aimed to establish the correlation between systemic and hepatic hemodynamics during LT by applying the hepatokinetic power hypothesis, based on the law of energy conservation and hydrodynamics.A total of 103 adult liver transplant recipients were enrolled in this study from September 2012 to December 2014. Systemic and hepatic hemodynamics were assessed intraoperatively to calculate the hepatokinetic power status. Severe surgical complications (Clavien-Dindo grade ≥III) were recorded as the main outcome measure, and potential covariates were evaluated including recipient, donor, donor-recipient match, surgery-related factors, conventional hemodynamics, and the intraoperative hepatokinetic power profile.In multivariate analysis, hepatokinetic power gradient >4260 mL mmHg min100 g graft weight (P = 0.001), 2.2 < ratio of hepatokinetic power from the portal vein to the hepatic artery ≤8.7 (P = 0.012), and hepatic resistance of partial grafts ≤0.006 or >0.015 min mmHg mL (P = 0.012) were associated with a higher risk. None of the conventional hemodynamic parameters, such as PVP, PVF, and hepatic venous pressure gradient, entered into this regression model (c-statistic = 0.916) when competing with hepatokinetic power indexes.The hepatokinetic power hypothesis clarifies the correlation of systemic and hepatic hemodynamics in a simple, rational manner. The hepatic resistance, derived from the hepatokinetic power equation, can be quantified and has an effect on the incidence of severe surgical complications. This finding offers a new objective clinical approach to evaluate graft quality during transplantation.