Placing the tibial component of an ankle prosthesis: results of a CT-based simulation in healthy adults.

PURPOSE: To characterize the 3D geometry of the distal tibia resection area from healthy individuals using CT-based digital implantation for proper preoperative sizing of TAA tibia component placement. METHODS: Standardized CT images of healthy ankle joints serving as intra-individual references for treatment of contralateral injuries were identified. The tibial cross section dedicated to virtually host the tibial component was digitally prepared, and the size of the virtual contact surface was calculated. Finally, out of five prototypes the one fitting best in terms of size and alignment was identified. RESULTS: CT scans taken from 319 subjects were used for the virtual implantation procedure. Body height and size of the distal tibia contact area correlated (r = 0.49 and 0.42 in females and males, each p < 0.001). Prosthesis sizes 2 and 3 fit well for the vast majority of patients, while the smallest and largest sizes are rarely required. CONCLUSIONS: Digital implantation of the tibial component should be considered a valuable tool for preoperative planning as well as for the development of new implant types.

Effect of Preoperative Coronal Plane Alignment on Actual Versus Predicted Alignment Using Patient Specific Instrumentation in Total Ankle Replacement.

Alignment in total ankle replacement is important for success and implant survival. Recently there has been the introduction and adoption of patient specific instrumentation for implantation in total ankle replacement. Current literature does not evaluate the effect of preoperative deformity on accuracy of patient specific instrumentation. A retrospective radiographic analysis was performed on 97 consecutive patients receiving total ankle replacement with patient specific instrumentation to assess the accuracy and reproducibility of the instrumentation. Subgroup analysis evaluated the effect of preoperative deformity. All surgeries were performed by fellowship trained foot and ankle surgeons without industry ties to the implants used. Preoperative and postoperative films were compared to plans based on computerized tomography scans to assess how closely the plan would be implemented in patients. Overall postoperative coronal plane alignment was within 2° of predicted in 87.6% (85 patients). Similarly, overall postoperative sagittal plane alignment was within 2° of predicted in 88.7% (86 patients). Tibial implant size was accurately predicted in 81.4% (79 patients), and talus implant size was correct in 75.3% (73 patients). Patients with preoperative varus deformity had a higher difference between predicted and actual postoperative alignment compared to valgus deformity (1.1° compared to 0.3°, p = .02). A higher average procedure time was found in varus patients, and more adjunctive procedures were needed in patients with varus or valgus deformity, but these were not significant, p > .5. Surgeons can expect a high degree of accuracy when using patient specific instrumentation overall, but less accurate in varus deformity.

Custom Patient-Specific 3D-Printed Titanium Truss Tibiotalocalcaneal Arthrodesis Implants for Failed Total Ankle Replacements: Classification, Technical Tips, and Treatment Algorithm.

BACKGROUND: The management of failed total ankle replacements, with significant loss of bone stock, is challenging with high rates of complications and associated morbidity. Recent technological advances have enabled the development of patient-customized 3D-printed titanium truss arthrodesis implants, which offer an alternative salvage option for failed total ankle replacements. METHODS: A prospective observational study was performed of 6 cases of failed total ankle replacements that were managed using custom patient-specific 3D-printed titanium truss arthrodesis implants. Technical tips, classification, and a treatment algorithm were developed based on our initial experience. RESULTS: Between November 2018 and March 2022, 6 patients underwent arthrodesis for failed total ankle replacements. Follow-up was available for all cases. The mean follow-up was 3.0 years (range 1-4.5). The mean MOXFQ Index improved from 73.1 to 32.3 (P < .05). The mean EQ-5D-5L Index improved from 0.366 to 0.743 (P < .05) and the EQ-VAS also improved from 53.0 to 63.3 (P = .36). The mean VAS-Pain score at final follow-up was 27.5. There were no cases of nonunion. None of the patients were smokers. The overall complication rate was 50%. Two patients returned to surgery: one for wound washout following TAR explantation and a second for removal of metalwork 2 years following surgery for a prosthetic joint infection secondary to hematogenous spread. No patients underwent revision fixation or amputation. CONCLUSION: Custom patient-specific 3D-printed titanium truss arthrodesis implants are a viable treatment option for failed total ankle replacements.

Three-Dimensional Printed Total Talus Replacement with a Concurrent Total Ankle Arthroplasty as a Personalized Approach for Advanced Ankle Osteoarthritis A Case Repor.

Ankle arthritis is becoming more common and can be pain-ful and debilitating. As the disease progresses, degenera-tive cystic changes may be found in the distal fibula, distal tibia, and talus. After failure of non-operative modalities, arthrodesis is often considered the surgical intervention of choice, but this leaves the patient with reduced range of motion, altered gait, and can negatively impact adjacent joints of the foot. Total ankle arthroplasty has been found to be an effective surgical option for ankle arthritis but is contraindicated in patients with talar collapse. When this is the case, a more personalized approach for preserving ankle motion is necessary. We present the case of a 65-year-old male with severe right ankle arthritis and talar collapse treated with a custom three-dimensionally printed talus and concurrent total ankle replacement with 2-year follow-up.

Survival and complications of transfibular trabecular metal total ankle replacement - A systematic review.

BACKGROUND: In the past decade, the transfibular approach to Total Ankle Replacement (TAR) has emerged as an alternative to anterior approach with reduced bone resection. The purpose of this systematic review is to report survival, complications, and reoperation rates of transfibular TAR. METHODS: We conducted a systematic search of studies that evaluated complications, reoperations, and survival of transfibular TAR following PRISMA guidelines across PubMed, Scopus and Web of Science. RESULTS: Our review included data from 12 cohorts, comprising 919 patients across 7 countries, with an average age of 62 years (59% posttraumatic). Over an average follow-up period of 3 years, adverse events occurred in 23% of cases, with 18% requiring surgical reintervention, mostly due to hardware removal. The survival rate of the transfibular TAR metal components was 97% at the final follow-up. CONCLUSION: Transfibular TAR demonstrates a 97% survival rate at a 3-year follow-up. LEVEL OF EVIDENCE: Level II.

Early results of combined total ankle total talus replacement in the revision setting.

BACKGROUND: Revision of failed total ankle replacement (TAR) is challenging and associated with increased morbidity. Given the increased popularity of TAR in treating end-stage ankle arthritis (ESAA), viable revision options are needed. The objective of this case series is to present a minimum 2-year clinical and radiographic outcomes of patient-specific custom 3D-printed total ankle total talus (TATR) prostheses in this unique subset of patients. METHODS: 19 participants with ESAA and failed primary TAR who underwent TATR by a single surgeon at our institution from 2019 to 2021 were retrospectively identified. All participants were indicated for revision of primary STAR implant (Stryker, Kalamazoo, MI) and underwent replacement with 3D-printed titanium implants based on preoperative CT analysis (Additive Orthopaedics, Little Silver, NJ). Custom components included a mobile-bearing total talus and stemmed tibial system, performed through an anterior approach. Pre- and postoperative patient-reported outcomes were assessed using the Patient Reported Outcomes Measurement Information System (PROMIS). Pre- and postoperative implant alignment was assessed using medial distal tibial angle (MDTA) and tibiotalar angle (TTA) on anteroposterior, and sagittal tibial angle (STA) on lateral weight-bearing plain films. RESULTS: The average patient age was 60.6 (range, 39-77) years, with an average follow-up of 37.9 (range, 25.3-57.5) months. There was statistically significant improvement in all PROMIS domains. Short-term survivorship was 100%, with two participants (11.0%) requiring reoperation for postoperative complications: one underwent open reduction internal fixation of the tibia for a periprosthetic fracture, and another underwent medial gutter debridement and tarsal tunnel release for recurrent pain. There were no significant differences in pre- versus postoperative radiographic alignment measured by MDTA (89.9 vs 86.4), TTA (89.7 vs 88.1), or STA (85.2 vs 85.3). CONCLUSION: Custom 3D-printed TATR is a promising option for revision TAR. There was significant short-term improvement in pain and physical function, with excellent short-term survivorship and an acceptable postoperative complication rate.

Early experience with a 3-D printed porous surface, fixed-bearing, total ankle arthroplasty: A minimum of 2-year follow-up.

BACKGROUND: This is a pilot study reviewing patients undergoing ankle replacement with the 3-D printed INFINITY™ with ADAPTIS™ total ankle arthroplasty (TAA) system. METHODS: A retrospective review was conducted of patients with a minimum two-year follow-up who underwent TAA with the INFINITY™ with ADAPTIS™ implant system. Outcome measures include implant survivorship, complications with subsequent reoperations, patient reported outcomes, and radiologic subsidence or radiolucency. RESULTS: Thirty patients were included with median follow-up of 26 months (range, 24-36). Implant survival rate was 90% (27/30). Two patients experienced linear radiolucency > 2 mm: one required a revision TAA secondary to tibial subsidence; the other patient was asymptomatic and nonprogressive on serial radiographs. No cystic radiolucencies > 5 mm were identified. VAS, PROMIS PF, and FADI scores improved significantly. CONCLUSION: TAA performed with the 3-D printed INFINITY™ with ADAPTIS™ implant technology led to ninety percent short term implant survivorship and improvement in patient reported outcomes with comparable results to other 4th generation arthroplasty systems as a treatment modality for end-stage ankle arthritis. LEVEL OF EVIDENCE: Level III, Retrospective cohort study, Prognostic.

Implant Choice May Reduce the Risk of Early Mechanical Failure in Total Ankle Replacement.

BACKGROUND: Total ankle replacements (TARs) have rapidly advanced in terms of volume, technique, design, and indications. However, TARs are still at risk for early mechanical failure and revision. Prior studies have investigated potential risk factors for failure, but have been limited to smaller series or older implants. This study sought to identify risk factors for early mechanical failure in modern TAR. METHODS: This is a retrospective study of a single-institution registry. Five surgeons contributed cases involving patients who underwent a primary TAR with any implant. Implants were grouped on the basis of the type of fixation. The primary outcome was early mechanical failure (revision with component removal for a non-infectious etiology, that is, subsidence, aseptic loosening, and/or malalignment). Logistic regression determined the effects of age, weight, hindfoot arthrodesis, implant type, and radiographic deformity on failure. RESULTS: The 731 included patients had a mean follow-up of 2.7 years. Ten percent (71 patients) had hindfoot arthrodesis. There were 33 mechanical failures (4.5%) at a mean of 1.7 years after the index surgical procedure. Our model demonstrated that hindfoot arthrodesis was associated with 2.7 times greater odds of failure (p = 0.045), every 10 kg of body weight increased the odds of tibial-sided failure by 1.29 times (p = 0.039), and implants with more extensive tibial fixation (stems or keels) lowered the odds of tibial failure by 95% (p = 0.031). CONCLUSIONS: In patients with uncontrollable risk factors (hindfoot arthrodesis) or risk factors that may or may not be modifiable by the patient (weight), implants with more robust tibial fixation may be able to reduce the risk of early mechanical failure. Further research is warranted to support efforts to decrease early failure in TAR. LEVEL OF EVIDENCE: Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

Fixed-bearing versus mobile-bearing total ankle replacement survivorship. A meta-analysis.

BACKGROUND: Main objective of this research is to know if there is a different survival rate between fixed bearing (FB) and mobile bearing (MB) total ankle replacement (TAR). We hypothesized that there are no differences between the survival rates of both implants. METHODS: A systematic search was performed in PubMed, Cochrane, EMBASE and ClinicalTrials.gov databases to identify published studies from August 2018 to September 2022 including results for FB and MB TAR survivorship. Inclusion criteria included 1) primary TAR in one or both feet in which implant could be identified , 2) a minimum of 20 procedures reported, 3) reported implant survivorship or calculable and 4) a minimum of 12 months follow-up for level 1-3 studies or 60 months for level 4 studies. RESULTS: 3902 ankles in 28 studies were included. 719 were FB and 3104 MB with an overall survivorship of 94% (95% CI [0.89; 0.97]) and 89% (95% CI [0.86; 0.92]) respectively. After subgroup analysis, we did not find differences among both groups (p =  0.429 ). Meta-regression analysis showed that longer follow-up was associated with lower survival rates in MB group (p = 0.000) while no other relationships were found with other factors (age, level of evidence or conflict of interests). CONCLUSIONS: No differences in survival rates between both groups were found. Age and other studied confounders were not found to be related with implant survivorship. However, longer follow-up was found to be related with lower survival rates. Studies with longer follow-up and higher level of evidence are needed to confirm results. LEVEL OF EVIDENCE: IV, systematic review of level I to IV studies.

Outcomes following total ankle total talus replacement: A systematic review.

BACKGROUND: Prosthetic substitution of the talus presents a significant challenge to the foot and ankle surgeon. The shear and compressive forces on the talus and its tenuous blood supply lead to high rates of avascular necrosis and eventual talar collapse. The purpose of this systematic review is to evaluate whether total ankle total talus replacement (TATTR) leads to improved clinical and radiographic outcomes with appropriate safety metrics in patients with a history of avascular necrosis or significant trauma. METHODS: We searched the concepts of talus, prosthesis, and arthroplasty in MEDLINE (PubMed), Embase (Elsevier), CINAHL Complete (EBSCOhost), and Scopus (Elsevier) from the database's inception through March 9, 2023. Inclusion Criteria were 1) previous trauma to the talus, 2) post-traumatic arthritis to the tibiotalar joint, 3) avascular necrosis of talus, 4) multiple failed prior interventions, 5) degenerative osteoarthritis to the tibiotalar joint, and 6) inflammatory arthropathy to tibiotalar joint. Patients less than 18 years of age and manuscripts in non-English languages were excluded. RESULTS: Of the 7625 references, 16 studies met the inclusion criteria, yielding data from 136 patients (139 ankles). The studies varied in design, with case reports and retrospective case series being predominant. The overall weighted average modified Coleman Methodology Score (mCMS) was 70.4 out of 100, indicating moderate flaws in study design that may be subject to various forms of bias and possible confounders. Demographics showed a diverse range of etiologies, with alumina ceramic being the primary prosthesis material. Functional scores demonstrated improvements in dorsiflexion and plantarflexion, although patient-reported outcome measures (PROs) were inconsistently reported. Complications included fractures, heterotopic ossification, prolonged wound healing, and infections. Revision details were sparsely reported. CONCLUSION: TATTR is a promising treatment modality for improving short-term functional outcomes for patients with avascular necrosis or trauma-related issues. However, this systematic review underscores the need for standardized reporting, longer-term follow-ups, and further research to establish the procedure's efficacy and safety, particularly in comparison to other treatment modalities. LEVEL OF EVIDENCE: III, Systematic Review of Level IV Studies.

Two-Year Outcomes After Total Ankle Replacement With a Novel Fixed-Bearing Implant By a Single Surgeon Non-Inventor.

Total ankle arthroplasty continues to gain popularity amongst surgeons and patients as an alternative to arthrodesis. Historically the designs of early implants were plagued with complications and frequently abandoned. Since that time the procedure and materials have undergone significant advancements in both surgical approach as well as design and function of the available implants. In this study, 40 consecutive patients who received a semiconstrained prosthesis with a unique fixed-bearing polyethylene insert were identified. Minimum follow-up was 2 y. Demographic, social, and past medical data was retrospectively reviewed. Concomitant procedures were also recorded. Radiographic analysis included lateral ankle radiograph postoperative range of motion (ROM) with maximum dorsiflexion and maximum plantarflexion weight bearing at the most recent clinic visit. Clinical outcomes included VAS, FFI, and AOFAS scores. Lateral radiographs taken in the office at a minimum 2-y follow-up showed mean maximum dorsiflexion of 11.8 degrees and plantarflexion of 13.9 degrees. VAS, FFI, and AOFAS scores improved from 8.1, 92.9, and 44.8 to 1.4, 15.3, and 90.1 postoperatively, respectively. A total of 2.5% (n = 1) required revision surgery for poly failure, and 5.0% (n = 2) underwent local wound care in the office setting postoperatively and healed without complications. Overall survivorship was 97.5% at the minimum follow-up of 2 y. In conclusion, similar studies have reported survivorship from 90% to 100% with modern ankle implants in short to mid-term follow-up. Although this is a small sample size, our data shows a 97.5% survivorship at 2 y postoperatively with favorable patient-reported statistically significant functional outcome scores, and ankle range of motion consistent with existing literature.

Patient-specific instrumentation (PSI) in total ankle arthroplasty: a systematic review.

BACKGROUND: Patient-specific instrument (PSI) may theoretically make total ankle arthroplasty (TAA) more accurate. Several studies have reported the outcomes of PSI TAA. The aim of this study is to systematically review the literature of PSI TAA. METHODS: PubMed, Embase, Web of Science, and Cochrane Library databases were systematically reviewed according to the Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines for PSI TAA. The quality of the included studies was evaluated according to Methodological Index for Non-Randomized Studies (MINORS). RESULT: Nine articles were ultimately included in the systematic review. The implant position and function outcome of TAA was similar between PSI and SI. Prediction accuracy of implant size remained great difference. PSI can shorten the operative time and fluoroscopy time. The quality of current studies on PSI TAA is insufficient to produce high-level evidence. CONCLUSION: PSI can get similar implant position and clinical outcome in TAA compared to SI, but current evidence is not strong enough to evaluate PSI TAA.

Three-Year Rates of Reoperation and Revision Following Mobile Versus Fixed-Bearing Total Ankle Arthroplasty: A Cohort of 302 Patients with 2 Implants of Similar Design.

BACKGROUND: Currently, the implants utilized in total ankle arthroplasty (TAA) are divided between mobile-bearing 3-component and fixed-bearing 2-component designs. The literature evaluating the influence of this mobility difference on implant survival is sparse. The purpose of the present study was therefore to compare the short-term survival of 2 implants of similar design from the same manufacturer, surgically implanted by the same surgeons, in fixed-bearing or mobile-bearing versions. METHODS: All patients were enrolled who underwent TAA with either the mobile-bearing Salto (Tornier and Integra) or the fixed-bearing Salto Talaris (Integra) in 3 centers by 2 surgeons between January 2004 and March 2018. All patients who underwent TAA from January 2004 to April 2013 received the Salto implant, and all patients who underwent TAA after November 2012 received the Salto Talaris implant. The primary outcome was time, within 3 years, to first all-cause reoperation, revision of any metal component, and revision of any component, including the polyethylene insert. Secondary outcomes included the frequency, cause, and type of reoperation. RESULTS: A total of 302 consecutive patients were included, of whom 171 received the mobile-bearing and 131 received the fixed-bearing implant. The adjusted hazard ratio for all-cause reoperation was 1.42 (95% confidence interval [CI], 0.67 to 3.00; p = 0.36); for component revision, 3.31 (95% CI, 0.93 to 11.79; p = 0.06); and for metal component revision, 2.78 (95% CI, 0.58 to 13.33; p = 0.20). A total of 31 reoperations were performed in the mobile-bearing group compared with 14 in the fixed-bearing group (p = 0.07). More extensive reoperation procedures were performed in the mobile-bearing group. CONCLUSIONS: With the largest comparison of 2 implants of similar design from the same manufacturer, the present study supports the use of a fixed-bearing design in terms of short-term failure. We found a 3-times higher rate of revision among mobile-bearing implants compared with fixed-bearing implants at 3 years after TAA. Reoperations, including first and subsequent procedures, tended to be less common and the causes and types of reoperations less extensive among fixed-bearing implants. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Radiographic and Clinical Outcomes of the Salto Talaris Total Ankle Arthroplasty.

BACKGROUND: The Salto Talaris is a fixed-bearing implant first approved in the US in 2006. While early surgical outcomes have been promising, mid- to long-term survivorship data are limited. The aim of this study was to present the survivorship and causes of failure of the Salto Talaris implant, with functional and radiographic outcomes. METHODS: Eighty-seven prospectively followed patients who underwent total ankle arthroplasty with the Salto Talaris between 2007 and 2015 at our institution were retrospectively identified. Of these, 82 patients (85 ankles) had a minimum follow-up of 5 (mean, 7.1; range, 5-12) years. The mean age was 63.5 (range, 42-82) years and the mean body mass index was 28.1 (range, 17.9-41.2) kg/m2. Survivorship was determined by incidence of revision, defined as removal/exchange of a metal component. Preoperative, immediate, and minimum 5-year postoperative AP and lateral weightbearing radiographs were reviewed; tibiotalar alignment (TTA) and the medial distal tibial angle (MDTA) were measured to assess coronal talar and tibial alignment, respectively. The sagittal tibial angle (STA) was measured; the talar inclination angle (TIA) was measured to evaluate for radiographic subsidence of the implant, defined as a change in TIA of 5 degrees or more from the immediately to the latest postoperative lateral radiograph. The locations of periprosthetic cysts were documented. Preoperative and minimum 5-year postoperative Foot and Ankle Outcome Score (FAOS) subscales were compared. RESULTS: Survivorship was 97.6% with 2 revisions. One patient underwent tibial and talar component revision for varus malalignment of the ankle; another underwent talar component revision for aseptic loosening and subsidence. The rate of other reoperations was 21.2% (n = 18), with the main reoperation being exostectomy with debridement for ankle impingement (n = 12). At final follow-up, the average TTA improved 4.4 (± 3.8) degrees, the average MDTA improved 3.4 (± 2.6) degrees, and the average STA improved 5.3 (± 4.5) degrees. Periprosthetic cysts were observed in 18 patients, and there was no radiographic subsidence. All FAOS subscales demonstrated significant improvement at final follow-up. CONCLUSIONS: We found the Salto Talaris implant to be durable, consistent with previous studies of shorter follow-up lengths. We observed significant improvement in radiographic alignment as well as patient-reported clinical outcomes at a minimum 5-year follow-up. LEVEL OF EVIDENCE: Level IV, retrospective case series.

A novel method to eliminate the influence of absorbed lipids on the characterization of ultra-high molecular weight polyethylene using Fourier-transform infrared spectroscopy.

BACKGROUND: Fourier-transform infrared spectroscopy (FTIR) is one of the standard methods to analyze ultra-high molecular weight polyethylene (UHMWPE) in orthopedic implants. For retrieved components, lipid extraction using an organic solvent prior to the measurement is necessary to eliminate the influence of lipids absorbed in vivo. However, its influence on the measurement has not been substantially investigated. OBJECTIVE: To investigate the influence of lipid extraction on the FTIR analysis of UHMWPE and to develop a novel method to obtain reliable results without inconvenient lipid extraction. METHODS: FTIR analysis was repeatedly performed on UHMWPE specimens from retrieved components before and after lipid extraction under various conditions. A method to calculate the extent of influence of the absorbed lipids from the FTIR spectra was developed using a peak separation technique. RESULTS: An elevated temperature was necessary for lipid extraction; however, it had the potential to influence the results if the conditions were not properly controlled. The results obtained using the peak separation technique coincided with those obtained after lipid extraction. CONCLUSION: The use of the peak separation technique enables the efficient acquisition of reliable results without the need for lipid extraction.

Histological Analysis of a Retrieved Porous Tantalum Total Ankle Replacement: A Case Report.

CASE: We present a case report documenting the retrieval and histological analysis of a porous tantalum (P-Ta) total ankle replacement (TAR) from a 50-year-old woman after a below-knee transtibial amputation. This rare opportunity to examine an intact TAR may help to better understand the implant-bone relationship because it would be in situ. CONCLUSION: In this case study, we demonstrate bone ingrowth to the first layer of the P-Ta and organized trabecular orientation, suggesting that equal bone load was achieved on the base and the rails in both components using a transfibular surgical approach.

Better implant survival with modern ankle prosthetic designs: 1,226 total ankle prostheses followed for up to 20 years in the Swedish Ankle Registry.

Background and purpose - We have previously reported on the prosthetic survival of total ankle replacements (TAR) in Sweden performed between 1993 and 2010. Few other reports have been published on 5- and 10-year survival rates. Furthermore, there is a lack of long-term outcome data on modern prosthetic designs. Therefore, we compared early and current prosthetic designs after a mean 7-year follow-up.Patients and methods - On December 31, 2016, 1,230 primary TARs had been reported to the Swedish Ankle Registry. We analyzed prosthetic survival, using exchange or permanent extraction of components as endpoint for 1,226 protheses with mean follow-up of 7 years (0-24). Differences between current (Hintegra, Mobility, CCI, Rebalance, and TM Ankle) and early prosthetic designs (STAR, BP, and AES) were examined by log rank test.Results - 267/1,226 prostheses (22%) had been revised by December 31, 2016. We found an overall prosthetic survival rate at 5 years of 0.85 (95% CI 0.83-0.87), at 10 years 0.74 (CI 0.70-0.77), at 15 years 0.63 (CI 0.58-0.67), and at 20 years 0.58 (CI 0.52-0.65). For early prosthetic designs the 5- and 10-year survival rates were 0.81 (CI 0.78-0.84) and 0.69 (CI 0.64-0.73) respectively, while the corresponding rates for current designs were 0.88 (CI 0.85-0.91) and 0.84 (CI 0.79-0.88). Current prosthetic designs had better survival (log rank test p < 0.001).Interpretation - Our results point to a positive time trend of prosthetic survival in Sweden; use of current prosthetic designs was associated with better prosthetic survival. Improved designs and instrumentation, more experienced surgeons, and improved patient selection may all have contributed to the better outcome.

Syndesmotic Overload in 3-Component Total Ankle Replacement.

BACKGROUND: Mobile-bearing total ankle replacement (TAR) potentially enables motion at the tibial implant-polyethylene insert (PI) interface. Such additional freedom of movement may overload periarticular ligaments and subsequently result in coronal translation of the talus. The aim of this study was to assess whether syndesmotic overload affects clinical and radiographic outcomes following mobile-bearing TAR and whether tibiofibular fusion is an effective treatment option. METHODS: Thirty-one patients who underwent revision surgery for syndesmotic overload after mobile-bearing TAR were retrospectively analyzed. Clinical and radiographic outcomes were assessed before and after index TAR, preoperatively to revision surgery, and at the last follow-up after revision surgery. Computed tomography scans were also analyzed. RESULTS: Ankles with lateral talar translation prior to revision surgery were about 10 times more likely to have valgus tibial implant position (P = .003). A wide tibiofibular distance at the level of the syndesmosis after index TAR was associated with an increased hindfoot moment arm at revision surgery (P = .025). Decrease of PI height at revision surgery and a PI fracture were evident in 10 (32%) and 4 (13%) cases, respectively. Talar cyst formation at revision surgery was evident in 12 (39%) cases. Tibiofibular fusion was effective in restoring function of the replaced ankle and providing pain relief. CONCLUSION: Syndesmotic overload impaired clinical and radiographic outcomes after mobile-bearing TAR. Proper implant positioning and additional realignment procedures may prevent overload of periarticular soft tissue structures after mobile-bearing TAR. LEVEL OF EVIDENCE: Level IV, retrospective case series.

A Novel Technique for Creating an Articulating Cement Spacer for Ankle Prosthetic Joint Infections.

Total ankle arthroplasty has been increasing as a treatment for end-stage ankle arthritis. With this increase, the incidence of total ankle prosthetic infections will also increase. Treatment of these infections depends on the duration of symptoms and whether the infection is acute or chronic in presentation. The treatment of choice for chronic infections is a 2-stage procedure, the removal of implants and placement of a static cement spacer. We describe a technique for creating an articulating antibiotic cement spacer through an anterior approach in a patient with an infected total ankle arthroplasty. The articulating antibiotic cement spacer allows high doses of local antibiotics, decreases soft tissue contractures, and allows continued motion of the joint.

Results of Trabecular-Metal Total Ankle Arthroplasties With Transfibular Approach.

BACKGROUND: Total ankle arthroplasty is an alternative for arthrodesis. The objective of this study was to investigate the safety of trabecular-metal ankle prosthetic system with transfibular approach and external frame and its association with changes in clinical and functional scores. METHODS: Between May 2013 and June 2017, a total of 104 consecutive patients underwent primary total ankle arthroplasty with a trabecular metal implant. The prospective clinical and radiographic data were collected. The mean follow-up time was 43.6 (14.6) months. RESULTS: Of 104 patients, 88 (89%) reported improved functioning and 65 (66%) were very satisfied with the surgery. Of the patients, 51 (50%) did not report any pain at the end of follow-up at all. The average Kofoed score was 37.6 (SD 17.4) points at baseline and 74.8 (SD 20.6) points at the end of follow-up. There were 37 additional procedures, and the complication rate was nearly 20%. CONCLUSION: Trabecular-metal total ankle prosthesis showed promising clinical results concerning pain and function. At 5-year follow-up, osteolysis and component loosening were rare. LEVEL OF EVIDENCE: Level IV, case series.