Tratamento integrado para correção do sorriso gengival: relato de caso / Integrated treatment for correction of gingival smile: case report

O sorriso gengival possui inúmeras causas, podendo acontecer por motivos esqueléticos, musculares ou por alteração no desenvolvimento dos tecidos de suporte. No entanto, na atualidade, a estética vermelha e a branca têm se apresentado completamente passíveis de transformações e com uma gama de procedimentos cirúrgicos ou não cirúrgicos para sanar as queixas dos pacientes. O objetivo geral deste trabalho é mostrar o poder que a odontologia tem frente às questões estéticas, como, por exemplo, a vergonha de sorrir por não se sentir confortável com os dentes curtos e com uma grande faixa de gengiva sendo exposta. O método utilizado foi um relato de caso. Que descreve todos os passos clínicos do tratamento de um paciente de 40 anos, que estava insatisfeita com o seu sorriso por apresentar erupção passiva alterada juntamente com hiperatividade do lábio superior. O plano de tratamento escolhido foi de realizar a cirurgia de aumento de coroa clínica estético, seguido de clareamento dentário e posteriormente um reposicionamento labial, com ajuda da toxina botulínica. Finalizando, para ajudar na cicatrização, o uso de laserterapia. O resultado de todo o processo cirúrgico envolvido neste trabalho, é satisfação do paciente, materializando o sonho deste, devolvendo segurança e espontaneidade ao sorrir. Pôde-se observar que através da combinação de técnicas cirúrgicas periodontais para tratar o sorriso gengival, obtém-se êxito tanto no sentido científico quanto no biológico, alcançando um sorriso esteticamente mais atrativo(AU)

Gummy smile has numerous causes, which can occur for skeletal or muscular reasons or due to changes in the development of supporting tissues. However, nowadays, the red and white aesthetics have been completely capable of transformation and with a range of surgical or non-surgical procedures to resolve patients' complaints. The general objective of this work is to show the power that dentistry has in the face of aesthetic issues, such as, for example, the shame of smiling due to not feeling comfortable with short teeth and a large strip of gum being exposed. The method used was a case report. Which describes all the clinical steps of the treatment of a 40-year-old patient, who was dissatisfied with her smile due to an altered passive eruption together with hyperactivity of the upper lip. The chosen treatment plan was to perform aesthetic clinical crown augmentation surgery, followed by tooth whitening and later lip repositioning, with the help of botulinum toxin. Finally, to help with healing, the use of laser therapy. The result of the entire surgical process involved in this work is patient satisfaction, materializing the patient's dream, restoring security and spontaneity when smiling. It was observed that through the combination of periodontal surgical techniques to treat gummy smile, success is achieved both in the scientific and biological sense, achieving a more aesthetically attractive smile(AU)

Factors Affecting Patients' Atttendance for Periodontal Follow-up Visits after Crown Lengthening Surgery.

PURPOSE: To assess adherence to follow-up maintenance visits among patients who had previously undergone crown-lengthening surgery and investigate the different factors impacting their compliance. MATERIALS AND METHODS: A total of 314 patients were identified for follow-up appointments. Based on their responses, participants were categorised into four groups: attendees, non-attendees, refusals, and unreachable. Furthermore, data on sociodemographic factors (age, sex, nationality, marital status, education, occupation, and residential area), medical history, dental history (including missing teeth, implants, or orthodontic treatment history), and past appointment attendance (average yearly appointments, missed appointment percentage, and last appointment date) were collected and analysed to understand their influence on patient compliance. RESULTS: In a sample of 314 patients, 102 (32.5%) attended the appointments successfully. Improved attendance rates were significantly associated with being female, Saudi Arabian, married, and employed (p < 0.05). Moreover, patients with a high frequency of annual appointments and a recent history of appointments exhibited better compliance. None of the analysed dental factors affected the attendance rates. CONCLUSION: About one-third of patients who had undergone crown lengthening surgery were compliant with the follow-up visits. Different factors influenced this compliance pattern to varying extents, with more efforts needed to enhance patients' commitment to these visits.

Influence of crown-lengthening surgery on teeth rehabilitated with ceramic single crowns: A 12-month prospective clinical study.

OBJECTIVE: To compare the clinical periodontal parameters of teeth restored with a single ceramic crown, with and without crown lengthening procedure. METHODS: This prospective, longitudinal, controlled, and single-blinded clinical trial involved 22 patients with a total of forty-one teeth with ceramic crowns. The teeth were divided into two groups: test (n = 21), comprising teeth rehabilitated post crown-lengthening surgery, and control (n = 20), comprising teeth rehabilitated without crown-lengthening surgery. Plaque index (PI), gingival index (GI), probing depth (PD), bleeding on probing (BoP), and clinical attachment level (CAL) were compared between groups (surgically treated and non-surgically treated) and within each group for each type of site (treated -tt; adjacent - ad; and nonadjacent - nad). Additionally, gingival phenotype (GP), gingival recession (GR), and keratinized tissue width (KTW) were also assessed post- restoration. Statistical analyses used a significance level set at 5 %. RESULTS: PI, GI, and BoP were reduced, but no statistically significant differences were observed within each group or between groups for most follow-up periods. CAL of the TT sites was consistently higher in the test group, and PD was also higher in the test group (p < 0.05), except at T3. adPD, nadPD, adCAL, and nadCAL demonstrated no significant differences between groups and periods. A significant association was identified between GP and the occurrence of GR, with the thick-flat phenotype demonstrating less association with GR, regardless of whether crown lengthening was performed or not. CONCLUSION: Crown-lengthening surgery in rehabilitated teeth does not significantly affect PI and GI after 12 months. Although crown-lengthening surgery affected PD and CAL in TT sites, it did not affect adjacent and non-adjacent sites. CLINICAL RELEVANCE: These findings emphasize the importance of considering individual patient factors and the potential impact on periodontal tissues when planning crown-lengthening surgery. Clinicians must have a comprehensive understanding of the dynamics of the periodontal tissues involved in restorative treatments to optimize the procedure, increase success rates, and minimize potential complications.

A comparative study of the use of digital technology in the anterior smile experience.

OBJECTIVES: this study aims to compare the clinical outcomes of traditional and digital crown extension guides in the aesthetic restoration of anterior teeth. Additionally, the study will analyze the differences in the results of various digital crown extension guides in anterior aesthetic restorations. METHODS: Sixty-two patients who required aesthetic restoration of their anterior teeth were selected for this study. The patients had a total of 230 anterior teeth and were randomly divided into three groups: a control group of 22 cases who received diagnostic wax-up with pressure film, an experimental group 1 of 20 cases who received 3D printed digital models with pressure film, and an experimental group 2 of 20 patients who received digital dual-positioning guides. The control group had a total of 84 anterior teeth, experimental group 1 had 72 anterior teeth, and experimental group 2 had 74 anterior teeth. The study compared three methods for fabricating crown extension guides: the control group used the diagnostic wax-up plus compression film method, while experimental group 1 used compression film on 3D printed models and experimental group 2 used 3D printed digital dual-positioning crown extension guides. After the crown lengthening surgery, the control group patients wore DMG resin temporary crown material for gingival contouring, while the experimental group patients wore 3D printed resin temporary crowns for the same purpose. The patients were followed up in the outpatient clinic after wearing temporary crowns for 1 month, 3 months, and 6 months, respectively. The clinical results were evaluated in terms of marginal fit, red aesthetic index, and white aesthetic index. RESULTS: Based on the statistical analysis, the experimental group required significantly fewer follow-up visits and less time for guide design and fabrication compared to the control group. Additionally, the surgical time for the experimental group was significantly shorter than that of the control group. During the postoperative period between the 1st and 3rd month, the PES index scores for the marginal gingival level, proximal, and distal mesiodistal gingival papillae of the experimental group showed a trend of superiority over those of the control group. By the 6th month, the marginal gingival level exhibited a significant difference between the experimental and control groups. The experimental group demonstrated superior results to the control group in terms of shape, contour, and volume of the teeth, color, surface texture, and transparency of the restorations, and features during the 1st and 3rd postoperative months. In the 6th month, the comparative results indicated that the experimental group continued to exhibit superior outcomes to the control group in terms of the shape, color, surface texture, and transparency of the restorations, as well as the characteristics of the teeth. Additionally, the experimental group demonstrated significantly fewer gingival alterations than the control group at 1 month, 3 months, and 6 months post-procedure, with this difference being statistically significant. Furthermore, the combination of 3D printing technology and restorative techniques was utilized, resulting in consistent patient satisfaction. CONCLUSION: Digitalisation plays an important role in anterior aesthetic restorations. The use of digital technology to manage the entire process of anterior cosmetic restorations can improve restorative results, reduce the number of follow-up appointments, shorten consultation time, and achieve better patient satisfaction.

Tratamento do sorriso gengival por meio da cirurgia periodontal: relato de caso / Treatment of gummy smile through periodontal surgery: case report

A busca por um sorriso considerado perfeito tem sido cada vez maior e isso tem se tornado um desafio para o Cirurgião-Dentista, visto que um sorriso harmônico não envolve somente dentes, mas também gengiva. A exposição excessiva da gengiva ao sorrir ou falar é considerada uma característica antiestética, pois gera uma desarmonia entre dentes, gengiva e lábios. Quando o paciente expõe 3 milímetros ou mais de gengiva ao sorrir, chamamos essa exposição de Sorriso Gengival. O presente trabalho tem como objetivo relatar o tratamento de um caso de sorriso gengival, onde foi realizada cirurgia periodontal ressectiva a fim de diminuir a exposição de tecido gengival ao sorrir. Descrição do caso: Paciente adulto 21 anos, sexo masculino, procurou atendimento no curso de graduação em Odontologia do Centro Universitário da Serra Gaúcha ­ FSG, com queixa de insatisfação estética devido ao tamanho de seus dentes e mostrar muito tecido Gengival ao sorrir. Após anamnese, exame clínico e radiográfico, o paciente foi diagnosticado com Sorriso gengival. O plano de tratamento proposto foi de cirurgia periodontal ressectiva. Conclusão: A partir do exposto, podemos concluir que o tratamento do sorriso gengival depende de sua etiologia. Um correto diagnóstico é de extrema importância, pois dependendo do fator etiológico do sorriso gengival, o plano de tratamento pode ser elaborado de acordo com a necessidade do paciente. No caso apresentado, o procedimento escolhido, cirurgia periodontal ressectiva, se mostrou efetivo no tratamento do sorriso gengival, devolvendo estética e satisfação ao paciente(AU)

The search for a smile that is considered perfect has been increasing and this has become a challenge for the Dental Surgeon, since a harmonious smile does not only involve teeth, but also gums. Excessive exposure of the gums when smiling or talking is considered an unsightly feature, as it creates disharmony between teeth, gums and lips. When the patient exposes 3 millimeters or more of gum when smiling, we call this exposure Gummy Smile. The present work aims to report the treatment of a case of gummy smile, where resective periodontal surgery was performed in order to reduce the exposure of gingival tissue when smiling. Case description: A 21-year-old adult patient, male, sought care at the undergraduate course in dentistry at the Centro Universitário da Serra Gaúcha ­ FSG, complaining of aesthetic dissatisfaction due to the size of his teeth and showing a lot of gingival tissue when smiling. After anamnesis, clinical and radiographic examination, the patient was diagnosed with gummy smile. The proposed treatment plan was resective periodontal surgery. Conclusion: From the above, we can conclude that the treatment of gummy smile depends on its etiology. A correct diagnosis is extremely important, because depending on the etiological factor of the gummy smile, the treatment plan can be elaborated according to the patient's needs. In the case presented, the chosen procedure, resective periodontal surgery, proved to be effective in the treatment of gummy smile, restoring aesthetics and patient satisfaction(AU)

Aumento de coroa clínica: reparação do desequilíbrio dentogengival com finalidade estética / Clinical crow augmentum: repair of the dentogengival imbalance with aesthetic purpose

O anseio por um sorriso harmônico tem se tornado cada vez maior, uma vez que muitos pacientes relatam desconforto ao sorrir, pois correlacionam a estética do sorriso a problemas de baixa autoestima e em alguns casos suscetibilidade a alterações psicossociais decorrente aos padrões estéticos impostos pela sociedade. O sorriso gengival é uma das grandes queixas relatadas por pacientes. A exposição excessiva de gengiva maxilar pode ser decorrente a fatores gengivais, ósseos, dentários e musculares. Dentre os tratamentos disponíveis para diminuir essa exposição, contamos com cirurgias periodontais, aplicação de toxina botulínica, tratamentos ortodônticos, cirurgia ortognática e reposicionamento labial. O tratamento adequado será definido de acordo com o fator etiológico de cada caso. Diante disso o objetivo do trabalho é realizar um relato de caso sobre aumento de coroa clínica estética. A paciente estava descontente com a exibição de uma grande quantidade gengival ao sorrir. Após estudos clínicos e de imagem o diagnóstico foi de erupção passiva alterada, tipo IB. O tratamento de escolha foi a gengivoplastia associada a remodelação óssea osteotomia e osteoplastia. O tratamento estético vai além de uma boa aparência, através deste trabalho, foi possível evidenciar impactos benéficos que o sorriso harmônico pode acarretar na vida do indivíduo, atendendo suas expectativas e a do cirurgião-dentista(AU)

The desire for a harmonic smile has become increasing, since many patients report discomfort when smiling, as they correlate smile aesthetics to problems of low self-esteem and in some cases susceptibility to psychosocial changes due to aesthetic standards imposed by society. Gummy smile is one of the major complaints reported by patients. Excessive exposure of the maxillary gingiva may be due to gingival, bone, dental and muscular factors. Among the treatments available to reduce this exposure, we have periodontal surgeries, botulinum toxin application, orthodontic treatments, orthognathic surgery and lip repositioning. The appropriate treatment will be defined according to the etiological factor of each case. Therefore, the objective of this work is to carry out a case report on aesthetic clinical crown augmentation. Patient discount with the display of a large amount of gingival when smiling. After clinical and imaging studies, the diagnosis was an altered passive eruption, type IB. The treatment of choice was gingivoplasty associated with bone remodeling, osteotomy and osteoplasty. Final comments and conclusions: The aesthetic treatment goes beyond a good appearance, through this work, it was possible to evidence beneficial impacts that the harmonic smile can have on the individual's life, meeting their expectations and that of the dentist(AU)

Treatment of excessive gingival display using conventional esthetic crown lengthening versus computer guided esthetic crown lengthening: (a randomized clinical trial).

BACKGROUND: Surgical guides have been proposed in an attempt to reach more predictable outcomes for esthetic crown lengthening. The objective of the present study was to evaluate the effectiveness of esthetic crown lengthening using 3D-printed surgical guides in the management of excessive gingival display due to altered passive eruption type 1B. MATERIALS AND METHODS: Sixteen patients diagnosed with altered passive eruption type 1B, were divided into two groups. In the control group, the procedure was carried out conventionally, and in the study group, a dual surgical guide was used. The parameters of wound healing (swelling, color, probing depth, bleeding index, and plaque index), pain scores, gingival margin stability, and operating time were assessed at 1 week, 2 weeks, 3 months, and 6 months postoperatively. RESULTS: There was no statistically significant difference in terms of wound healing, pain scores, and gingival margin stability between both groups at different time intervals (P = 1), however, there was a statistical difference between both groups in terms of operating time with the study group being significantly lower (P < 0.001). CONCLUSION: Digitally assisted esthetic crown lengthening helps shorten the operating time and reduces the possibility of human errors during the measurements. This will be useful in helping practitioners achieve better results. PRACTICAL IMPLICATIONS: The conventional method remains to be the gold standard. However, shorter operating time and lower margins for errors will help reduce costs as the chair side time is reduced as well as the possibility for a second surgery is lower. This will improve patient satisfaction as well.

Biological shaping as a conservative alternative for crown lengthening: A review.

OBJECTIVES: The perio-restorative approach to maintaining supracrestal tissue attachment (STA; formerly known as biologic width) is a fundamental goal in modern dentistry. This article aims to review the clinical impact of biologic shaping (BS) as an innovative alternative to traditional crown lengthening procedures, reflecting over two decades of clinical experience. MATERIAL AND METHODS: As a review paper, it is crucial to highlight that BS stands as a unique approach designed to optimize STA while emphasizing minimal to no removal of supporting bone. The review spans over two decades, consistently demonstrating clinical efficacy and predictability. Remarkably, BS focuses on addressing issues such as root concavities, developmental grooves, irregularities, furcation lips, and CEJ offering a remarkable level of clinical precision. RESULTS: The reviewed literature underscores that BS has consistently achieved substantial clinical success in fulfilling its objectives. This method presents a biologically sound alternative to traditional crown lengthening, placing a strong emphasis on the preservation of essential bone tissue and the establishment of durable STA. CONCLUSIONS: The results suggest that BS is a logical and biologically driven approach for maintaining STA, making it a promising alternative to traditional crown lengthening. The method offers a predictable and reproducible way to preserve bone tissue while achieving durable STA. This innovation holds great promise in the field of periodontal and restorative dentistry.

Dental and periodontal dimensions stability after esthetic clinical crown lengthening surgery: a 12-month clinical study.

OBJECTIVES: To evaluate the stability of periodontal tissues 3 (T3), 6 (T6), and 12 (T12) months after esthetic crown lengthening (ACL) and the possible correlations between changes in those structures. MATERIALS AND METHODS: Twenty individuals were evaluated through clinical assessment, photography, and tomography. Measurements included gingival margin (GM), clinical crown length (CCL), interdental papilla height (PH) and width (PW), gingival thickness (GT), bone thickness (BT), probing depth (PD), distance between alveolar crest and GM, distance between alveolar crest and cementoenamel junction. Nonparametric and correlation statistics were performed (p < 0.05). RESULTS: CCL at T0 was 7.42 ± 0.70 mm and increased to 9.48 ± 0.49 mm immediately after ACL, but it decreased to 8.93 ± 0.65 mm at T12. PD decreased 0.60 mm from T0 to T6, and it increased 0.39 mm from T6 to T12. BT decreased 0.20 mm, while GT increased 0.29 mm from T0 to T12. Both PW and PH showed enlargement in T12. A positive moderate correlation was found between CCL/T0 and CCL/T12, GT/T0 and AC-GM/T12, BT/T0 and GT/T12. A few negative moderate correlations were PD/T0 and CCL/T12, PD/T0 and PH/T0, PD/T0 and BT/T12. CONCLUSIONS: ACL procedure was effective. Although some rebound occurred, that was not clinically important. PD tended to reestablish its original length, partially due to a migration of GM during the healing period. Besides, a thickening of supracrestal soft tissues was observed. CLINICAL RELEVANCE: The present study centers on the factors influencing the stability of periodontal tissues after esthetic crown lengthening, underscoring the procedure's influence on esthetics and biology and the need for careful treatment planning.

Pre-restorative crown lengthening surgery: influence of restorative treatment timing on clinical outcomes-a pilot study.

OBJECTIVES: Aim of this study was to assess the influence of restorative treatment timing on the periodontal, patient and operator-reported outcomes following crown lengthening surgery (CLS). MATERIALS AND METHODS: Eighteen study participants requiring CLS were divided into two groups based on prosthetic rehabilitation timing (6 or 14 weeks postoperatively). Clinical parameters were recorded around treated and neighboring teeth before and after surgery, 6 and 14 weeks postoperatively, at prosthesis delivery, and three and six months after. Soft tissue and radiographic bone changes were evaluated. Patients assessed their perception of the procedure by means of a questionnaire. The final treatment outcome was rated by both patients and prosthodontists. RESULTS: CLS resulted in statistically significant and stable apical displacement of the gingival margin, at both treated and adjacent sites. Plaque and bleeding scores remained low throughout. No statistically significant differences were observed between groups for any clinical or radiographic parameter examined. Healing was uneventful and treatment outcome was satisfying for both patients and prosthodontists, without statistically significant differences between groups. CONCLUSIONS: The present study has been characterized as pilot, because it was not possible to reach the sample size indicated by the a priori power analysis. CLS is an effective pre-prosthetic procedure as long as it is performed under a certain surgical protocol which predicts for at least a 3 mm distance between bone crest and the flap margin at suturing. Within the limitations of this study, six weeks after surgery may be an adequate healing time for the onset of prosthetic restoration. CLINICAL RELEVANCE: Crown lengthening surgery is commonly performed in daily clinical practice with the aim to restore teeth with short clinical crowns. Based on periodontal, patient and operator-reported criteria, 6 weeks after CLS may be adequate healing time before the onset of prosthetic restoration. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT03947658, 13/05/2019, retrospectively registered.

Effects of the GingivalStat approach on early gingival margin remodeling following esthetic clinical crown lengthening: A case series.

OBJECTIVES: The aim of this case series is to present the potential applications of the GingivalStat approach, that is, the use of temporary gingival stabilizers, to favor early gingival margin remodeling and prevent the occurrence of gingival rebound following esthetic clinical crown lengthening. CLINICAL CONSIDERATIONS: Four patients requiring clinical crown lengthening were treated for esthetical and functional reasons. The surgical approach included: (a) gingival margin recontouring; (b) full-thickness flap elevation; (c) osteotomy (to achieve an adequate dimension between the alveolar bone crest and the CEJ) and osteoplasty (to reduce the bone thickness and improve the buccal bone anatomic profile, where indicated); (d) temporary gingival stabilizer placement using a block-out resin or a composite (the GingivalStat approach); and (e) flap repositioning, adaptation, and suture. One- to five-year follow-ups, reported in the different case scenarios, show evidence of clinically stable gingival margins around the treated teeth. CONCLUSIONS: Within the limits of this case series, it can be concluded that the GingivalStat approach appears as a further maneuver to cope with clinical crown lengthening procedures at esthetic sites. GingivalStat seems to favor gingival margin contour remodeling during the early phase of healing as well as prevent the occurrence of gingival rebound. CLINICAL SIGNIFICANCE: GingivalStat approach may guide gingival margin remodeling and prevent gingival rebound after wound healing of sites submitted to esthetic clinical crown lengthening.

Use of both the diode and Er: YAG lasers in esthetic crown lengthening with the aid of digitally guided dual technique: 3 years follow-up.

OBJECTIVE: To explore the feasibility of the usage of digital guides in combination with low- and high-power lasers for the treatment of excessive gingival display, also known as "gummy smile". CLINICAL CONSIDERATIONS: Excessive gingival display due to altered passive eruption can affect patient's perception of their own esthetics and consequently have an impact on self-confidence. Therefore, the management of this condition should offer a predictable and stable long-lasting solution. To attain these objectives, digital planning emerges as a tool in optimizing the outcomes of crown lengthening surgery for this condition by enhancing precision through the use of surgical guides. Additionally, the usage of high- and low-powered lasers can provide a safe approach because of their tissue selective removal properties. CONCLUSIONS: The technique described showed satisfactory clinical results in the short- and long-term follow-up, leading to an improvement in patients' self-esteem. This approach integrates digital and laser technologies to deliver a surgical treatment characterized by precision, efficiency, and safety. CLINICAL SIGNIFICANCE: Digital dentistry has contributed to innovative dental procedures, as personalizing surgical guides for patients, assisting and guiding incisions of the gingival margins, as well as the extension of the osteotomy, during the procedures for increasing the clinical crown. Furthermore, smile esthetics are directly related to an individual's improved emotional and social quality of life.

Esthetic rehabilitation through crown lengthening and laminate veneers.

AIM: To describe a digital workflow utilizing 3D printing technology to guide esthetic crown lengthening and control tooth preparation. CLINICAL CONSIDERATIONS: After the initial intraoral and face scans, an esthetic treatment plan was performed digitally based on the patient's personality and face type using artificial intelligence-based 3D smile design software. A 3D-printed tray relined with silicone over a 3D-printed model was used for the mock-up. A 3D-printed guide was implemented to assist esthetic crown lengthening by incorporating, simultaneously, information about the desired free gingival line and the alveolar bone level. Based on the initial planning, a set of reduction guides was 3D printed to check and correct the tooth preparation. Prior to the start of construction of the final monolithic restorations, their design was verified using 3D-printed prototypes. A stabilization splint was digitally designed and 3D printed to protect and maintain the final result. CONCLUSIONS: Technologic advances can improve the predictability of an interdisciplinary esthetic approach. Digital planning can be transferred to clinical reality using a digital workflow, utilizing a set of appropriate 3D-printed guides, which can help to control clinical procedures based on the initial planning. CLINICAL SIGNIFICANCE: By following the proposed step-by-step workflow, clinicians can achieve predictable results through an interdisciplinary approach, guiding both the periodontal plastic surgery and the restorative treatment after an individualized CAD/CAD procedure for 3D-printed guides.

Restauração transcirúrgica: inter-relação periodontia e dentística / Transsurgical restoration: interrelationship between periodontics and dentistry

Tendo em vista a importância da relação Dentística Restauradora e Periodontia na Odontologia atual, o presente estudo demonstrou o relato de um caso clínico realizado no Complexo Odontológico do Centro Universitário da Serra Gaúcha (FSG), retratando um procedimento de restauração transcirúrgica em um paciente cujo elemento 13 estava comprometido com uma cavidade subgengival disto-palatino, sendo a resina composta o material restaurador de escolha. Este estudo teve como objetivo apresentar um caso clínico demonstrando a técnica de restauração transcirúrgica e a integração do planejamento entre Periodontia e Dentística Restauradora realizado na Clínica de Odontologia do Centro Universitário da Serra Gaúcha -FSG. Este trabalho mostrou a importância da realização de uma técnica cirúrgica e restauradora correta por parte dos cirurgiões-dentistas, assim como na verificação de que os tecidos periodontais podem reagir de forma positiva à presença de materiais restauradores adesivos posicionados subgengivalmente(AU)

In view of the importance of the restorative dentistry and periodontics relationship in current dentistry, the present study demonstrated the report of a clinical case carried out in the Dental Complex of the Centro Universitário da Serra Gaúcha - FSG, portraying a transsurgical restoration procedure in a patient whose element 13 was compromised with a subgingival cavity of this-palatine, the composite resin being the restorative material of choice. This study aimed to present a clinical case demonstrating the technique of transsurgical restoration and the integration of planning between Periodontics and Restorative Dentistry carried out at the Dentistry Clinic of the University Centro Universitário da Serra Gaúcha - FSG. This study showed the importance of performing a correct surgical and restorative technique by dentists, as well as in verifying that periodontal tissues can react positively to the presence of adhesive restorative materials positioned subgingival(AU)

Reabilitação estética anterior em abordagem multidisciplinar: relato de caso / Aesthetic rehabilitation in a multidisciplinary approach: case report

A estética tem um papel importante na aceitação e autoestima das pessoas e, em virtude disso, os pacientes buscam cada dia mais ter um sorriso harmonioso. As reabilitações estéticas devem envolver um planejamento completo, atrelando função e estética, avaliando tamanho dos dentes, perfil e alturas gengivais, altura do sorriso e corredor bucal. Por conta disso, a odontologia nos permite uma série de abordagens terapêuticas diferentes que chegam a resultados satisfatórios para o paciente. Sendo assim, o presente trabalho tem como objetivo descrever um relato de caso de uma paciente com queixa estética do seu sorriso devido à diferentes tonalidades, formas e tamanhos dos dentes. Após anamnese, exame clínico e radiográfico, o plano de tratamento proposto foi de harmonizações periodontal com aumento de coroa e enxerto gengival, além de coroas em cerâmicas de dissilicato de lítio. Dentro desse contexto, mostra-se que uma abordagem multidisciplinar para reabilitação estética e funcional do sorriso é fundamental, a qual nos proporciona equilíbrio e naturalidade entre estética branca e vermelha no resultado do tratamento reabilitador(AU)

Aesthetics plays an important role in people's acceptance and self-esteem and, as a result, patients increasingly seek to have a harmonious smile. Aesthetic rehabilitations must involve a complete planning, linking function and aesthetics, evaluating tooth size, gingival profile and heights, smile height and buccal corridor. Because of this, dentistry allows us a series of different therapeutic approaches that reach satisfactory results for the patient. Therefore, the present work aims to describe a case report of a patient with an aesthetic complaint of her smile due to different shades, shapes and sizes of teeth. After anamnesis, clinical and radiographic examination, the proposed treatment plan was periodontal harmonization with crown augmentation and gingival graft, in addition to lithium disilicate ceramic crowns. Within this context, it is shown that a multidisciplinary approach to the aesthetic and functional rehabilitation of the smile is fundamental, which provides us with balance and naturalness between white and red aesthetics in the result of the rehabilitation treatment(AU)

The crown lengthening double guide and the digital Perio analysis.

OBJECTIVE: This article describes a surgical crown lengthening double guide, which was digitally obtained to improve diagnosis, treatment outcome, and follow-up. CLINICAL CONSIDERATIONS: The rehabilitation of anterior dental esthetics should involve interdisciplinary and facially driven planning for achieving pleasant long-term outcomes. Surgical crown lengthening is one of the most common periodontal surgery, which can be assisted by digital tools to improve surgical planning and follow-up. CONCLUSION: The double guide for surgical crown lengthening allows the proper management of hard and soft tissues for achieving a predefined goal based on biological requirements and facially driven planning. In addition, the digital quality control allows the follow-up compared with the pre-operative condition and planned treatment plan. CLINICAL SIGNIFICANCE: The use of digital tools allow the clinician to develop a facially driven planning with proper communication with the team and patient, leading to a shorter, more predictable, and less invasive surgical technique, reducing postoperative inflammation and increasing patient comfort.

Comparative Study of Two Ways to Measure Root Trunk Length to Assess the Possibility of Crown Lengthening in Molars: Measuring Parallel to the Root Surface vs Parallel to the Tooth Axis

The aim of this study was to compare root trunk measurements taken parallel to the tooth axis (TA) to those taken parallel to the root surface (RS) in order to assess the decision-making implications of each method on crown-lengthening surgery. A total of 672 root trunks were measured via CBCT in two planes: TA and RS. The possibility of performing crown lengthening in each clinical situation based on the distance from the cementoenamel junction (CEJ) to the crestal bone (CB) after ostectomy (CEJ-CB) was judged and compared between groups. When RS was used as a reference point, the proportions of cases that judged crown lengthening to be possible were 83.63%, 59.08%, and 39.18% for CEJ-CB values of 4, 5, and 6 mm, respectively. When TA was used instead, those proportions decreased by 3.87% to 7.29%. The lingual root trunk of the lower first molar (LFL) with a CEJ-CB of 4 to 5 mm emerged as the most problematic area; here, the difference between reference planes occurred with one out of every six teeth. Within the limits of this study, utilizing TA for surgical crown-lengthening treatment planning is not ideal because it may lead to extraction of many savable teeth.

New approach to expedite the delivery of the final crowns for teeth requiring crown lengthening surgery: a pilot study.

BACKGROUND: The healing period from crown lengthening procedures (CLPs) often delays the final crown delivery. This study aimed to explore the feasibility of a new approach expediting the delivery of the final crowns for teeth requiring CLPs. METHODS: Teeth requiring CLPs and single-crown restorations between the canine and the second molar were included. After the initial tooth preparation, a CLP was performed. In the experimental group, the final tooth preparation and final impression were made during the CLP; the final crown was then delivered at the suture-removal appointment. In the control group, the final impression was made 8 weeks after the CLP. The level of gingival margin (GM), pocket depth (PD), and crestal bone levels (CBLs) were compared between the two groups before CLPs (T0), at delivery of the crowns (T1), and at 12 months in function (T2). RESULTS: Twenty-one lithium-disilicate crowns were delivered to 20 subjects and followed up. The mean interval between the CLPs and the delivery of crowns was 2.5 weeks for the experimental group and 12 weeks for the control group. No significant differences were observed between the two groups in the level of GM, PD, and CBLs at each time point. No significant treatment difference in crestal bone loss was observed between the two groups at T2 (Experimental = -0.11 mm, Control = -0.03 mm; p = 0.67). CONCLUSION: Making the final tooth preparation and the final impression at the CLP significantly reduced the time between the CLP and the delivery of the final crown and showed comparable clinical outcomes.

[Healing of the dento-gingival junction following modified crown lengthening procedure in beagle dogs].

OBJECTIVE: To evaluate the type of wound healing following modified crown lengthening surgery in dog model to provide a biological basis for its clinical application. METHODS: Flap surgery, traditional crown lengthening procedure and modified crown lengthening procedure were performed on the right maxillary central incisor, the left maxillary central incisor and the left maxillary first lateral incisor respectively of five male beagle dogs. The right maxillary first lateral incisors with no surgical intervention were used as controls. Thirty-six weeks after the experimental procedure, tissue blocks were harvested and prepared for histological examination and analysis. RESULTS: Histometric examination of buccolingual sections stained with hematoxylin-eosin demonstrated that the type of wound healing in the flap surgery group was re-attachment, similar to the control group. For the traditional crown lengthening surgery group, all of the five beagle dogs had lamellar cementum defects on root surface, the wound healing of four beagle dogs was new attachment accompanied by new cementum formation at cementum defect areas and the suprac-restal connective tissue was functionally oriented perpendicular to the new cementum. The wound healing of the other beagle dog was long junctional epithelial attachment, in which the junctional epithelium extended to the apical terminus of the cementum defect. In the modified crown lengthening surgery group, four beagle dogs had cementum defects on root surface (two lamellar cementum defects and two shallow platform-like cementum defects), the wound healing of three beagle dogs was new attachment, however, the supracrestal connective tissue was parallel to the root surface. The type of wound healing of another one beagle dog was long junctional epithelial attachment. Wound healing of one beagle dog in this group could not be characterized due to incomplete dissection. CONCLUSION: Wound healing in the modified crown lengthening surgery group was similar to the traditional crown lengthening surgery group, and two types of wound healing were observed: new attachment and long junctional epithelium attachment. Neither type of root treatment procedure (root planing or root reshaping) nor root surface defect pattern (the lamellar cementum defect or shallow platform-like cementum defect) influenced the observed type of wound healing.