Why Does Hip Arthroscopy Fail? Indications and PEARLS for Revision Success.

The surgical treatment of femoroacetabular impingement has been shown to have successful early and mid-term clinical outcomes. Despite these favorable clinical outcomes that have been published in the literature, there is a subgroup of patients that present with continued or recurrent symptoms after surgical treatment. Not only has there been an increase in the number of hip arthroscopy procedures, but also there has been a corresponding increase in the number of revision hip arthroscopy and hip preservation surgeries. Previous studies have reported residual deformity to be the most common reason for revision hip arthroscopy. However, chondral, labral, and capsular considerations also are important when addressing patients not only in the primary but also, the revision setting. In this review, we outline the evaluation and treatment of the patient that presents with continued hip and groin pain after undergoing a hip.

Hip capsular thickness correlates with range of motion limitations in femoroacetabular impingement.

PURPOSE: Femoroacetabular impingement (FAI) is a clinical entity of the hip causing derangements in range of motion, pain, gait, and function. Computer-assisted modeling and clinical studies suggest that patients with FAI have increased capsular thickness compared to those without.A retrospective chart review was performed to assess relationships between capsular thickness, hip range of motion, and demographic factors in patients with FAI. METHODS: Local Research Ethics Board approval was obtained to extract electronic medical records for 188 patients at a single institution who had undergone hip arthroscopy. Procedures were performed from 2009 to 2017 by a single, fellowship-trained, board-certified sports medicine orthopaedic surgeon. Inclusion criteria were preoperative hip range of motion testing, positive clinical impingement testing, and magnetic resonance imaging (MRI) of the affected hip. Patient demographics, hip range of motion, and time to surgery were recorded. MRIs were reviewed by a board-certified musculoskeletal radiologist blinded to clinical data. Maximum thickness of the anterior hip capsule was measured in axial, axial oblique, and sagittal oblique sequences. Anterior capsular thickness was also measured at the level of the femoral head-neck junction in axial sequences (axial midline). RESULTS: Axial midline capsular thickness was negatively correlated with hip flexion (r = - 0.196, p = 0.0042) and internal rotation (r = - 0.143, p = 0.0278). Significant differences were seen between genders in axial midline thickness (5.3 ± 1.4 mm males/4.8 ± 1.3 mm females, p = 0.0079), flexion (113° ± 18° males/120° ± 17° females, p = 0.0029), and internal rotation (23° ± 13° males/29° ± 12° females, p = 0.0155). Significant differences also existed between side affected in flexion (116° ± 17° right/119° ± 17° left, p = 0.0396) and internal rotation (26° ± 12° right/29° ± 13° left, p = 0.0029). Positive correlation was observed between axial oblique capsular thickness and flexion (r = 0.2345) (p = 0.0229). CONCLUSIONS: Increased anterior hip capsular thickness at the femoral head-neck correlates with limitations in hip range of motion in FAI. The strength of this relationship may be affected between pathologies, genders, and affected side. Pathologic thickening of the hip capsule may contribute to restricted hip mobility on clinical examination, and elucidation of this relationship may provide guidance into capsular management during hip arthroscopy. LEVEL OF EVIDENCE: 4, retrospective case series.

Intramuscular Tendon of the Adductor Pollicis and Underlying Capsule of the Metacarpophalangeal Joint: An Anatomical Study With Possible Implications for the Stener Lesion.

PURPOSE: To identify the layered relationship anatomically between the musculotendinous structures of the adductor pollicis, the ulnar collateral ligament, and the capsule of the metacarpophalangeal joint in terms of understanding the pathomechanism of a Stener lesion. METHODS: We macroscopically analyzed 37 cadaveric thumbs to identify the intramuscular tendon of the adductor pollicis and bony attachments of the joint capsule including the ulnar collateral ligament. In addition, we histologically analyzed 3 thumbs and made a 3-dimensional image of 3 other thumbs, using micro-computed tomography. RESULTS: The adductor pollicis has 3 components of an intramuscular tendon (dorsal, palmar, and distal), which connect to form a lambda shape. The dorsal part inserts into the joint capsule dorsal to the ulnar sesamoid. The palmar part inserts into the ulnar sesamoid. The distal part inserts into the lateral tubercle of the proximal phalanx. The thickened and cord-like part of the joint capsule, which has generally been referred to as the proper ulnar collateral ligament, has a distinct bony attachment on the proximal slope of the lateral tubercle of the proximal phalanx separate from the adductor pollicis insertion. CONCLUSIONS: Of the 3 components of the intramuscular tendon of the adductor pollicis muscle, the dorsal part inserted into not only the aponeurosis but also the joint capsule. CLINICAL RELEVANCE: The results of the current study suggest the anatomic basis for a possible pathomechanism of the Stener lesion.

The glenocapsular ligament and the posterosuperior part of the joint capsule of the shoulder are well vascularized.

PURPOSE: A detailed structural anatomy of the posterosuperior shoulder capsule and "glenocapsular ligament" is still rather unknown. The purpose of this study was meticulously to investigate and describe the structure and blood supply of the glenocapsular ligament on the posterosuperior shoulder joint capsule. METHOD: Sixteen fixed and twelve fresh cadaveric shoulder specimens with a mean age of 73.4 (±6.4) years were analysed. Dissection without arterial injection was performed on the 16 fixed specimens-using an alcohol-formalin-glycerol solution. Before dissection, the 12 fresh specimens received of arterial injection a 10% aqueous dispersion of latex solution. After the injection, these shoulders were also fixed in an alcohol-formalin-glycerol solution. RESULTS: The glenocapsular ligament was found in all 28 specimens. Single or double parallel-running bundles of connective tissue fibres were found to form a capsular-ligamentous structure on the posterosuperior part of the joint capsule. One part of the ligament was mediosuperior, another posterosuperior. The mediosuperior part varied in shape, and in 12 of 28 cases, it was absent. The glenocapsular ligament arose from the supraglenoid tubercle and posterior part of the collum scapulae and inserted into the semicircular humeral ligament. The posterior ascending branch of the circumflex scapular artery directly fed small branches laterally and medially to the joint capsule, supplying the glenocapsular ligament and the deep layer of the joint capsule. CONCLUSION: The glenocapsular ligament is a constant anatomical structure that consists of one or two different parts. The glenocapsular ligament and the posterosuperior part of the joint capsule appear well vascularized via the posterior ascending branch of the circumflex scapular artery. CLINICAL RELEVANCE: It is the hope of the authors that this anatomical study can help surgeons who perform open or arthroscopic surgery to the posterior part of the shoulder. Knowledge of the vascular anatomy presented in this study may be especially important when incisions are made to the posterior part of the shoulder, and should minimize the risk of complications.

The relationship of the anterior articular capsule to the adjacent subscapularis: An anatomic and histological study.

INTRODUCTION: The purpose of this study was to delineate the anatomic relationship between the anterior articular capsule and the adjacent subscapularis by measuring the dimensions of the anterior articular capsule attachment and the subscapularis footprint on the humerus, as well as investigating the interface between the two structures. MATERIALS AND METHODS: Three shoulder specimens underwent histological analysis; for histological analysis, cross-sections through the subscapularis-capsule complex were harvested at the tendinous and muscular insertion sites. The dimensions of the anterior articular capsule attachment and the subscapularis footprint (including the tendinous and muscular insertions) were measured in thirteen cadaveric shoulder specimens. RESULTS: Histologically, the articular capsule has thin and loosely arranged collagen fibers with many interspersing fibroblast nuclei, whereas the outer layer of the articular capsule blends into a layer of more loosely spaced and less organized collagen fibers. This interface between the subscapularis and the underlying articular capsule is filled with more loosely spaced and less organized collagen fibers. The macroscopic evaluation showed that the minimum articular capsule width (4.2mm, SD 2.2mm) was located at its initiation 4.9mm (SD, 2.1mm) inferior to the superior margin of the subscapularis; the corresponding subscapularis footprint width measured 10.1mm (SD, 4.9mm). The maximum articular capsule width was11.1 mm (SD, 3.7mm) and was located 5mm distal to the inferior margin of the tendinous footprint. The maximum subscapularis footprint width was 15.8mm (SD, 2.9mm); the corresponding articular capsule attachment measured 5.2mm (SD, 1.8mm). CONCLUSIONS: Our results suggest that the anterior articular capsule attachment of the glenohumeral joint complements the footprint of the subscapularis and occupies a larger area of the lesser tubercle and metaphysis of the humerus than previously documented. The histological study confirms the presence of a demarcation between the subscapularis and articular capsule, specifically more significant at the region medial to the tendon insertion and at the muscular insertion of the subscapularis.

Intra-articular capacity of the elbow joint.

The intra-articular capacity of the elbow joint is reported to be 23 ± 4 ml on cadaveric elbows. During years, this value was the standard. The aim of this observational study was to reanalyze the volume of the elbow joint on live patients. Measurement of the intra-articular capacity and pressure of the elbow joint was performed on 30 patients (mean age: 43.8 years) undergoing elbow arthroscopy. Intra-articular capacity was recorded when the elbow moved to the maximum lose packed position and/or when there was a sudden drop in pressure, indicating a capsular rupture (maximum capacity). Indications for arthroscopy were loose bodies, osteoarthritis, synovitis, radial head resection, and lateral collateral ligament repair. Mean intra-articular capacity and pressure were 35.8 ml and 557.5 mm Hg, respectively. Mean maximal capacity was 40.5 ml. We conclude that the intra-articular capacity of the elbow joint is substantially greater than reported in previous studies. Clin. Anat. 30:795-798, 2017. © 2017Wiley Periodicals, Inc.

The Anterolateral Ligament Has Similar Biomechanical and Histologic Properties to the Inferior Glenohumeral Ligament.

PURPOSE: To characterize the tensile and histologic properties of the anterolateral ligament (ALL), inferior glenohumeral ligament (IGHL), and knee capsule. METHODS: Standardized samples of the ALL (n = 19), anterolateral knee capsule (n = 15), and IGHL (n = 13) were isolated from fresh-frozen human cadavers for uniaxial tensile testing to failure. An additional 6 samples of the ALL, capsule, and IGHL were procured for histologic analysis and determination of elastin content. RESULTS: All investigated mechanical properties were significantly greater for both the ALL and IGHL when compared with capsular tissue. In contrast, no significant differences between the ALL and IGHL were found for any property. The elastic modulus of ALL and IGHL samples was 174 ± 92 MPa and 139 ± 60 MPa, respectively, compared with 62 ± 30 MPa for the capsule (P = .001). Ultimate stress was significantly lower (P < .001) for the capsule, at 13.4 ± 7.7 MPa, relative to the ALL and IGHL, at 46.4 ± 20.1 MPa and 38.7 ± 16.3 MPa, respectively. The ultimate strain at failure was 37.8% ± 7.9% for the ALL and 39.5% ± 9.4% for the IGHL; this was significantly greater (P = .041 and P = .02, respectively) for both relative to the capsule, at 32.6% ± 8.4%. The strain energy density was 7.8 ± 3.1 MPa for the ALL, 2.1 ± 1.3 MPa for the capsule, and 7.1 ± 3.1 MPa for the IGHL (P < .001). The ALL and IGHL consisted of collagen bundles aligned in a parallel manner, containing elastin bundles, which was in contrast to the random collagen architecture noted in capsule samples. CONCLUSIONS: The ALL has similar tensile and histologic properties to the IGHL. The tensile properties of the ALL are significantly greater than those observed in the knee capsule. CLINICAL RELEVANCE: The ALL is not just a thickening of capsular tissue and should be considered a distinct ligamentous structure comparable to the IGHL in the shoulder. The tensile behavior of the ALL is similar to the IGHL, and treatment strategies should take this into account.

Joint capsule attachment to the coronoid process of the ulna: an anatomic study with implications regarding the type 1 fractures of the coronoid process of the O'Driscoll classification.

BACKGROUND: The attachment of the anterior joint capsule on the ulnar coronoid process is not yet completely understood. The purpose of this study was to clarify the anatomic relationship between the anterior capsule of the elbow joint and the tip of the coronoid process. METHODS: Seventeen embalmed elbows were used for this anatomic study. The anterior capsule of the elbow joint was reflected, and the attachment of the capsule on the coronoid process was exposed. The attachment of the joint capsule on the coronoid process was macroscopically and histologically observed, its relationship to the coronoid tip was assessed, and the length of the attachment of the joint capsule was measured. RESULTS: The length of the capsule attachment at the radial side of the coronoid (11.9 mm) was greater than that at the ulnar side (6.1 mm). The bone thickness on the coronoid tip from the proximal edge of the joint capsule attachment was 1.9 mm; together, the cartilage and bone thickness was 4.7 mm. At the radial side of the coronoid, the thickness of the joint capsule at the proximal aspect of the attachment of 2 samples was 0.6 mm and 0.3 mm, and that at the tip of the coronoid was 2.6 mm and 1.7 mm, respectively. CONCLUSIONS: The anterior capsule of the elbow joint had a substantial attachment on the radial side of the coronoid process. The subtype 2 tip fractures of the O'Driscoll classification included the joint capsule attachment, joint cartilage, and subchondral bone.

Análisis de los términos utilizados en la literatura científica para referirse a la cápsula articular y ligamentos articulares de la articulación temporomandibular / Analysis of terms used in the literature to refer to temporomandibular joint capsule and joint ligaments

La identificación de las estructuras anatómicas con un término único, informativo y con ausencia de homónimos, entre otros principios, es la tarea primordial que lleva adelante la Federación Internacional de Programas de Terminologia Anatomica (FIPAT) perteneciente a la International Federation of Anatomical Associations (IFAA). Sin embargo, en la literatura científica, sobre todo con orientación clínica y quirúrgica, existen aún dificultades para adoptar la Terminologia Anatomica Internacional (TAI), generándose múltiples denominaciones para una misma estructura anatómica, complicando la comunicación científica. El objetivo de este trabajo fue analizar los términos utilizados en la literatura científica en relación a la cápsula articular y los ligamentos articulares de la articulación temporomandibular. Se revisaron artículos científicos y también libros de texto de anatomía general y específicos de la articulación temporomandibular. Se compararon los términos adoptados en la literatura especializada con la establecida en la TAI, identificándose los términos de la TAI más utilizados, como así también aquellos mencionados en artículos científicos y libros de texto pero no presentes en la TAI. El análisis realizado en esta investigación permitió identificar el uso de términos presentes y ausentes en la TAI, analizando su denominación, origen, inserción y función específica.

The identification of anatomical structures with a single, informative term and absence of homonyms, among other principles, the primary task is being conducted by the International Federation of programs Anatomical Terminology (FIPAT) belonging to the International Federation of Anatomical Associations (IFAA). However, in the literature, particularly with clinical and surgical direction, there is still difficulty in adopting the Terminologia Anatomica Internacional (TAI), generating multiple names for the same anatomical structure, complicating scientific communication. The aim of this study was to analyze the terms used in the literature in relation to the joint capsule and joint ligaments of the temporomandibular joint. Scientific papers and textbooks on general and specific anatomy, of the temporomandibular joint is reviewed. We compared the terms adopted with TAI literature specialized terms, identifying the TAI terms most used, as well as those mentioned in scientific and textbook literature, but not present in the TAI. The analysis in this study identified the use of terms present and absent in TAI, analyzing their name, origin, insertion and specific function.

Is arthroscopic remplissage a tenodesis or capsulomyodesis? An anatomic study.

PURPOSE: Arthroscopic remplissage of a Hill-Sachs lesion is classically described as a capsulotenodesis of the infraspinatus within the posterolateral humeral head. The aim of this cadaveric study was to evaluate the anatomic relationship between the position of anchors and sutures placed for remplissage and the infraspinatus and teres minor. The hypothesis was that remplissage actually corresponds to a capsulomyodesis of the infraspinatus and teres minor muscles. METHODS: A two-anchor arthroscopic remplissage was performed followed by open dissection of ten fresh-frozen human cadaveric shoulders. The exit point of sutures related to muscle-tendon unit as well as the distance between the anchors and the rotator cuff was measured. RESULTS: The superior sutures were localized generally in the infraspinatus, near the musculotendinous junction. The inferior sutures passed through the teres minor muscle in seven of ten cases. The distance between the superior and inferior anchors and the posterolateral greater tuberosity was 14 ± 2 and 12 ± 3 mm, respectively. CONCLUSIONS: Arthroscopic remplissage is a capsulomyodesis of infraspinatus and teres minor rather than a capsulotenodesis of the infraspinatus alone as previously believed. Muscular damage may explain posterosuperior pain observed in patients who underwent remplissage.

Anatomy of the capsulolabral complex and rotator interval related to glenohumeral instability.

The glenohumeral joint with instability is a common diagnosis that often requires surgery. The aim of this review was to present an overview of the anatomy of the glenohumeral joint with emphasis on instability based on the current literature and to describe the detailed anatomy and anatomical variants of the glenohumeral joint associated with anterior and posterior shoulder instability. A review was performed using PubMed/MEDLINE using key words: Search terms were "glenohumeral", "shoulder instability", "cadaver", "rotator interval", "anatomy", and "anatomical study". During the last decade, the interest in both arthroscopic repair techniques and surgical anatomy of the glenohumeral ligament (superior, middle, and inferior), labrum, and rotator interval has increased. Understanding of the rotator interval and attachment of the inferior glenohumeral ligament on the glenoid or humeral head have evolved significantly. The knowledge of the detailed anatomy and anatomical variations is essential for the surgeon in order to understand the pathology, make a correct diagnosis of instability, and select proper treatment options. Proper understanding of anatomical variants can help us avoid misdiagnosis. Level of evidence V.

Anatomic description of the anterolateral ligament of the knee.

PURPOSE: The anterolateral ligament, a structure that has been known for 130 years, has again attracted the attention both of orthopaedic doctors and anatomists. Since its initial description until now, this structure has had different names. Whether labelled as the mid-third lateral capsular ligament, the anterior oblique band of the fibular collateral ligament or the anterolateral ligament of the knee, this structure has been responsible for the so-called Segond avulsion fractures. The aim of this study was to determine the precise position and layer of the lateral knee compartment within which the anterolateral ligament is located, as well as its type. METHODS: In this study, the anatomical dissection of the lateral segment of 14 cadaveric knees (six male, eight female; seven right, seven left; average age of subjects: 78 years) was performed. The dissection was carried out in keeping with Seebacher, layer by layer. RESULTS: The anterolateral ligament was identified in seven out of 14 cadaveric knee joints (50 %). The length of the ligament was 41 ± 3 mm, while the width was 4 ± 1 mm and the thickness 1 mm (in the middle section). In 14 % of the cases, the anterior oblique band was identified as a part of the FCL. In all of the knee joints, a part of the fibres of the ITT with the same insertions and direction as the ALL was found, located, however, at a much more superficial level than the ALL. CONCLUSION: Analysis of the current scientific literature related to the anterolateral ligament and layer-by-layer dissection of the lateral region of 14 cadaveric knees has led to the conclusion that the anterolateral ligament is a thickening of the knee joint capsule located in the third layer of the lateral region of the knee (according to Seebacher) which is not always clearly morphologically differentiated from the remainder of the joint capsule. The anterolateral ligament is unequivocally a part of the joint capsule, which is why any damage to it should be treated in the same way as any other damage to the joint capsule.

Anatomy of the hip capsule and pericapsular structures: A cadaveric study.

The anatomical literature contains relatively little qualitative or quantitative information regarding the anatomy of the hip joint capsule and its relationship to the surrounding pericapsular structures. We aimed to provide a detailed description of the anatomy of these relationships in a cadaveric study. Dissections of 11 nonpaired, fresh-frozen cadaveric hips were performed, documenting capsular dimensions and attachments to pericapsular structures including the rectus femoris, gluteus minimus, iliocapsularis, and piriformis and short external rotator muscles. Tendon footprints of these pericapsular muscles were measured, as well as their distance from reproducible bony landmarks. The thickest portion of the hip capsule is posterosuperiorly and superiorly near its acetabular origin, while the thinnest portion is posteriorly and posteroinferiorly near its femoral insertion. The piriformis has no capsular contribution; however, the reflected head of the rectus femoris, gluteus minimus, iliocapsularis, and external rotator tendons all demonstrate consistent capsular adhesions. There are complex associations among these structures, yet the surrounding layers of the capsule are confluent in predictable relationships. Knowledge of the intricate relationship between the hip capsule and pericapsular structures presented here will be useful for surgeons as they perform the precise and specific capsular releases required by various operative procedures. This study also provides information that can lead to further biomechanical, radiographic, and clinical studies on these structures.

Anterior ankle arthroscopy: indications, pitfalls, and complications.

Anterior ankle arthroscopy is a useful, minimally invasive technique for diagnosing and treating ankle conditions. Arthroscopic treatment offers the benefit of decreased surgical morbidity, less postoperative pain, and earlier return to activities. Indications for anterior ankle arthroscopy continue to expand, including ankle instability, impingement, management of osteochondritis dissecans, synovectomy, and loose body removal. Anterior ankle arthroscopy has its own set of inherent risks and complications. Surgeons can decrease the risk of complications through mastery of ankle anatomy and biomechanics, and by careful preoperative planning and meticulous surgical technique.

A quantitative analysis of hip capsular thickness.

PURPOSE: The purpose of this study was to provide a comprehensive quantitative analysis of capsular thickness adjacent to the acetabular rim in clinically relevant locations. METHODS: Dissections were performed and hip capsular measurements were recorded on 13 non-paired, fresh-frozen cadaveric hemi-pelvises using a coordinate measuring device. Measurements were taken for each clock-face position at 0, 5, 10 and 15 mm distances from the labral edge. RESULTS: The capsule was consistently thickest at 2 o'clock for each interval from the labrum with a maximum thickness of 8.3 at 10 mm [95 % CI 6.8, 9.8] and 15 mm [95 % CI 6.8, 9.7]. The capsule was noticeably thinner between 4 and 11 o'clock with a minimum thickness of 4.1 mm [95 % CI 3.3, 4.9] at 10 o'clock at the labral edge. Direct comparison between 0 and 5 mm between 9 and 3 o'clock showed that the hip capsule was significantly thicker at 5 mm from the labrum at 9 o'clock (p = 0.027), 10 o'clock (p = 0.032), 1 o'clock (p = 0.003), 2 o'clock (p = 0.001) and 3 o'clock (p = 0.001). CONCLUSIONS: The hip capsule was thickest between the 1 and 2 o'clock positions for all measured distances from the acetabular labrum and reached its maximum thickness at 2 o'clock, which corresponds to the location of the iliofemoral ligament.

A cadaveric study of the anterolateral ligament: re-introducing the lateral capsular ligament.

PURPOSE: The purpose of this study was to verify and characterize the anatomical properties of the anterolateral capsule, with the aim of establishing a more accurate anatomical description of the anterolateral ligament (ALL). Furthermore, microscopic analysis of the tissue was performed to determine whether the ALL can morphologically be classified as ligamentous tissue, as well as reveal any potential functional characteristics. METHODS: Three different modalities were used to validate the existence of the ALL: magnetic resonance imagining (MRI), anatomical dissection, and histological analysis. Ten fresh-frozen cadaveric knee specimens underwent MRI, followed by anatomical dissection which allowed comparison of MRI to gross anatomy. Nine additional fresh-frozen cadaveric knees (19 total) were dissected for a further anatomical description. Four specimens underwent H&E staining to look at morphological characteristics, and one specimen was analysed using immunohistochemistry to locate peripheral nervous innervation. RESULTS: The ALL was found in all ten knees undergoing MRI and all nineteen knees undergoing anatomical dissection, with MRI being able to predict its corresponding anatomical dissection. The ALL was found to have bone-to-bone attachment points from the lateral femoral epicondyle to the lateral tibia, in addition to a prominent meniscal attachment. Histological sectioning showed ALL morphology to be characteristic of ligamentous tissue, having dense, regularly organized collagenous bundles. Immunohistochemistry revealed a large network of peripheral nervous innervation, indicating a potential proprioceptive role. CONCLUSION: From this study, the ALL is an independent structure in the anterolateral compartment of the knee and may serve a proprioceptive role in knee mechanics.

Three-dimensional analysis of elbow soft tissue footprints and anatomy.

BACKGROUND: Tendinous and ligamentous injuries commonly occur in the elbow. This study characterized the location, surface areas, and origin and insertional footprints of major elbow capsuloligamentous and tendinous structures in relation to bony landmarks with the use of a precision 3-dimensional modeling system. METHODS: Nine unpaired cadaveric elbow specimens were dissected and mounted on a custom jig. Mapping of the medial collateral ligament (MCL), lateral ulnar collateral ligament (LUCL), triceps, biceps, brachialis, and capsular reflections was then performed with 3-dimensional digitizing technology. The location, surface areas, and footprints of the soft tissues were calculated. RESULTS: The MCL had a mean origin (humeral) footprint of 216 mm(2), insertional footprint of 154 mm(2), and surface area of 421 mm(2). The LUCL had a mean origin footprint of 136 mm(2), an insertional footprint of 142 mm(2), and a surface area of 532 mm(2). Of the tendons, the triceps maintained the largest insertional footprint, followed by the brachialis and the biceps (P < .001-.03). The MCL, LUCL, and biceps footprint locations were consistent, with little variability. The surface areas of the anterior (1251 mm(2)) and posterior (1147 mm(2)) capsular reflections were similar (P = .82), and the anterior capsule extended farther proximally. CONCLUSION: Restoring the normal anatomy of key elbow capsuloligamentous and tendinous structures is crucial for effective reconstruction after bony or soft tissue trauma. This study provides the upper extremity surgeon with information that may aid in restoring elbow biomechanics and preserving range of motion in these patients.

Descrição anatômica da articulação metacarpo-falângica em ovinos / Anatomical description of the metacarpal phalangeal joint in sheep

A descrição anatômica articular evidencia os fatores padrões para as condições biomecânicas que devem ser consideradas na seleção do animal de uma determinada espécie. Dessa forma, objetivou-se descrever a articulação metacarpo-falângica na espécie ovina, em relação a sua arquitetura, considerando o volume, recessos, comunicações e relações no aspecto anatômico macroscópico. Para tanto, foram utilizados dez animais adultos da espécie ovina, raça Santa Inês, machos e fêmeas, escolhidos aleatoriamente. A cápsula articular teve uma dimensão média de 3,05 cm e uma capacidade volumétri-ca média de 3,99 ml; as comunicações ocorreram em um grau médio de expansão do Látex nas faces dorsal (56,7%) e palmar (53,3%); as comunicações proximais nas faces dorsal, palmar e dorso-palmar apareceram em 100,0% dos casos; os recessos estiveram presentes nas extremidades distais. Nesse contexto, conclui-se, que a articulação metacarpo-falângica de ovinos apresenta-se com relações topográficas semelhantes à descrita para os demais ruminantes, possuindo comunicações em sua porção proximal e recessos distalmente.

The joints anatomical description highlights the standards for biomechanical conditions that must be considered in the selection of a particular animal species. Thus, the objective was to describe the metacarpal phalangeal joint in sheep, for its architecture and adjacent structures. For this purpose, we used ten adult sheep, Santa Ines breed, males and females, randomly chosen. The anatomical specimens for the study were collected by the disarticulation of the distal row of carpal and metacarpal bone of an sheep's forelimb. To observe the joint capsule, adjacent structures were overruled and their topographical relationships with such joint analyzed. The longitudinal measures of the joint capsule and the III-IV metacarpal bones, proximal phalanges III and IV proximal phalanx were taken. Through the results, it is concluded that the metacarpal phalangeal joint in sheep presents similar topographical relationships described for other ruminants, with connections at the proximal and recesses at the distal areas.

[Anatomic features of posterior septum of knee joint and its application in posterior trans-septal portal for arthroscopic surgery].

OBJECTIVE: To summarize the anatomic features of the posterior septum of the knee joint and its application in posterior trans-septal portal for arthroscopic surgery. METHODS: The literature related to posterior septum of the knee joint and arthroscopic surgery was extensively reviewed and analyzed. RESULTS: The posterior septum of the knee joint has more mechanoreceptors and blood vessels in the upper part, which are close to arteria popliteal at the tibial plateau level; the posterior compartment is divided into wider posteromedial and narrower posterolateral compartments. A safe arthroscopic trans-septal portal is established, in the knee flexion of 90 degrees, in a lateral-to-medial direction, and with an inserting location below the middle of posterior septum. CONCLUSION: The establishment method of posterior trans-septal portal is not uniform and all the features of posterior septum should be considered to decrease the complications.