Gold nanoparticles conjugated with epidermal growth factor and gadolinium for precision delivery of contrast agents in magnetic resonance imaging.

The utilization of contrast agents in magnetic resonance imaging (MRI) has become increasingly important in clinical diagnosis. However, the low diagnostic specificity of this technique is a limiting factor for the early detection of tumors. To develop a new contrast agent with a specific target for early stage tumors, we present the synthesis and characterization of a nanocontrast composed of gold nanoparticles (AuNPs), gadopentetic acid (Gd-DTPA), and epidermal growth factor (EGF). Carbodiimide-based chemistry was utilized to modify Gd-DTPA for functionalization with AuNPs. This resulted in the formation of the Au@Gd-EGF nanocontrast. The relaxation rate (1/T1) of the nanocontrast was analyzed using MRI, and cytotoxicity was determined based on cell viability and mitochondrial activity in a human breast adenocarcinoma cell line. Fourier-transform infrared spectroscopy analysis confirmed the effectiveness of carbodiimide in the formation of the Gd-DTPA-cysteamine complex in the presence of bands at 930, 1042, 1232, 1588, and 1716 cm-1. The complexes exhibited good interactions with the AuNPs. However, the signal intensity of the Au@Gd-EGF nanocontrast was lower than that of the commercial contrast agent because the r1/r2 relaxivities of the Gd-DTPA-based contrast agents were lower than those of the gadoversetamide-based molecules. The Au@Gd-EGF nanocontrast agent exhibited good biocompatibility, low cytotoxicity, and high signal intensity in MRI with active targeted delivery, suggesting significant potential for future applications in the early diagnosis of tumors.

S-Protected Thiolated Chitosan versus Thiolated Chitosan as Cell Adhesive Biomaterials for Tissue Engineering.

Chitosan (Ch) and different Ch derivatives have been applied in tissue engineering (TE) because of their biocompatibility, favored mechanical properties, and cost-effectiveness. Most of them, however, lack cell adhesive properties that are crucial for TE. In this study, we aimed to design an S-protected thiolated Ch derivative exhibiting high cell adhesive properties serving as a scaffold for TE. 3-((2-Acetamido-3-methoxy-3-oxopropyl)dithio) propanoic acid was covalently attached to Ch via a carbodiimide-mediated reaction. Low-, medium-, and high-modified Chs (Ch-SS-1, Ch-SS-2, and Ch-SS-3) with 54, 107 and 140 µmol of ligand per gram of polymer, respectively, were tested. In parallel, three thiolated Chs, namely Ch-SH-1, Ch-SH-2, and Ch-SH-3, were prepared by conjugating N-acetyl cysteine to Ch at the same degree of modification to compare the effectiveness of disulfide versus thiol modification on cell adhesion. Ch-SS-1 showed better cell adhesion capability than Ch-SS-2 and Ch-SS-3. This can be explained by the more lipophilic surfaces of Ch-SS as a higher modification was made. Although Ch-SH-1, Ch-SH-2, and Ch-SH-3 were shown to be good substrates for cell adhesion, growth, and proliferation, Ch-SS polymers were superior to Ch-SH polymers in the formation of 3D cell cultures. Cryogels structured by Ch-SS-1 (SSg) resulted in homogeneous scaffolds with tunable pore size and mechanical properties by changing the mass ratio between Ch-SS-1 and heparin used as a cross-linker. SSg scaffolds possessing interconnected microporous structures showed good cell migration, adhesion, and proliferation. Therefore, Ch-SS can be used to construct tunable cryogel scaffolds that are suitable for 3D cell culture and TE.

Melimine-Modified 3D-Printed Polycaprolactone Scaffolds for the Prevention of Biofilm-Related Biomaterial Infections.

Biomaterial-associated infections are one of the major causes of implant failure. These infections result from persistent bacteria that have adhered to the biomaterial surface before, during, or after surgery and have formed a biofilm on the implant's surface. It is estimated that 4 to 10% of implant surfaces are contaminated with bacteria; however, the infection rate can be as high as 30% in intensive care units in developed countries and as high as 45% in developing countries. To date, there is no clinical solution to prevent implant infection without relying on the use of high doses of antibiotics supplied systemically and/or removal of the infected device. In this study, melimine, a chimeric cationic peptide that has been tested in Phase I and II human clinical trials, was immobilized onto the surface of 3D-printed medical-grade polycaprolactone (mPCL) scaffolds via covalent binding and adsorption. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) spectra of melimine-treated surfaces confirmed immobilization of the peptide, as well as its homogeneous distribution throughout the scaffold surface. Amino acid analysis showed that melimine covalent and noncovalent immobilization resulted in a peptide density of ∼156 and ∼533 ng/cm2, respectively. Furthermore, we demonstrated that the immobilization of melimine on mPCL scaffolds by 1-ethyl-3-[3-(dimethylamino)propyl] carbodiimide hydrochloride (EDC) coupling and noncovalent interactions resulted in a reduction of Staphylococcus aureus colonization by 78.7% and 76.0%, respectively, in comparison with the nonmodified control specimens. Particularly, the modified surfaces maintained their antibacterial properties for 3 days, which resulted in the inhibition of biofilm formation in vitro. This system offers a biomaterial strategy to effectively prevent biofilm-related infections on implant surfaces without relying on the use of prophylactic antibiotic treatment.

Emerging chitosan grafted essential oil components: A review on synthesis, characterization, and potential application.

Chitosan is a green, low-cost natural polymer material. The bioactivity of chitosan can be enhanced by coupling with essential oil chemicals, which can broaden the range of applications. Essential oil-chitosan (EOCS), the chitosan modified by essential oil components, which has been widely used as a multi-perspective in numerous filed of food and life in recent years. Herein, the synthesis, characterization, and recent application of EOCS are reviewed. Synthetic methods include 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)-mediated modification, free radical-induced modification, enzyme-catalyzed modification, bromide-mediated modification, and method of forming Schiff-base directly. The successful synthesis of derivatives can be demonstrated by UV, FT-IR, TLC, and NMR. EOCSs can be used as preservative coatings, packaging materials, and antibacterial agents in the food industry, as well as drug delivery and wound treatment in biomedicine. In addition, EOCSs are also used in other industries, such as environmental protection, metal corrosion inhibition, as well as plant pest control.

A novel targeted iron oxide nanocarrier for inhibiting M2-type macrophages in the tumor microenvironment.

Background: Tumor-associated macrophages (TAMs) are vital to the tumor microenvironment. They are classified as antitumor M1-type or protumor M2-type macrophages. M2-type macrophages accumulate in the tumor stroma and are related to poor prognosis. Iron oxide nanoparticles are used as drug delivery vehicles because of the structure of carboxyl groups on their surface and their ability to be easily phagocytosed by macrophages. Aim: The signal transducer and activator of transcription 6 (STAT6) signaling pathway controls M2 macrophage polarization, but the STAT6 signaling pathway inhibitor AS1517499 lacks efficient targeting in vivo. Thus, our study aimed to block the polarization of TAMs to M2-type macrophages. Methods and Material: We used ultrasmall superparamagnetic iron oxide nanoparticles (USPIONs) as drug carriers coated with the STAT6 signaling pathway inhibitors AS1517499 and CD163 monoclonal antibodies to synthesize the targeted nanocomplex AS1517499-USPION-CD163 utilizing the carbodiimide method. Then, we determined its physicochemical properties, including hydrodynamic size distribution, ultrastructure, iron concentration, protein content and activity of the CD163 monoclonal antibody, AS1517499 content, and selectivity for M2-type macrophages, and its biological applications. Results: The hydrodynamic size distribution was stable (average size = 95.37 nm). Regarding biological applications, the targeted nanocomplex selectively inhibited M2-type macrophages. Conclusions: The targeted nanocomplex AS1517499-USPION-CD163 showed high selectivity for M2-type macrophages. Therefore, iron oxide nanoparticles targeting TAMs may be an effective approach to TAM therapy.

Heparin-Superparamagnetic Iron Oxide Nanoparticles for Theranostic Applications.

In this study, superparamagnetic iron oxide nanoparticles (SPIONs) were engineered with an organic coating composed of low molecular weight heparin (LMWH) and bovine serum albumin (BSA), providing heparin-based nanoparticle systems (LMWH@SPIONs). The purpose was to merge the properties of the heparin skeleton and an inorganic core to build up a targeted theranostic nanosystem, which was eventually enhanced by loading a chemotherapeutic agent. Iron oxide cores were prepared via the co-precipitation of iron salts in an alkaline environment and oleic acid (OA) capping. Dopamine (DA) was covalently linked to BSA and LMWH by amide linkages via carbodiimide coupling. The following ligand exchange reaction between the DA-BSA/DA-LMWH and OA was conducted in a biphasic system composed of water and hexane, affording LMWH@SPIONs stabilized in water by polystyrene sulfonate (PSS). Their size and morphology were investigated via dynamic light scattering (DLS) and transmission electron microscopy (TEM), respectively. The LMWH@SPIONs' cytotoxicity was tested, showing marginal or no toxicity for samples prepared with PSS at concentrations of 50 µg/mL. Their inhibitory activity on the heparanase enzyme was measured, showing an effective inhibition at concentrations comparable to G4000 (N-desulfo-N-acetyl heparin, a non-anticoagulant and antiheparanase heparin derivative; Roneparstat). The LMWH@SPION encapsulation of paclitaxel (PTX) enhanced the antitumor effect of this chemotherapeutic on breast cancer cells, likely due to an improved internalization of the nanoformulated drug with respect to the free molecule. Lastly, time-domain NMR (TD-NMR) experiments were conducted on LMWH@SPIONs obtaining relaxivity values within the same order of magnitude as currently used commercial contrast agents.

Characterisation of products from EDC-mediated PEG substitution of chitosan allows optimisation of reaction conditions.

PEGylation is a common method use to modify the physiochemical properties and increase the solubility of chitosan (CHI). Knowledge of optimal reaction conditions for PEGylation of CHI underpins its ongoing use in nanomedicine. This study synthesised methoxy polyethyleneglycol grafted CHI (mPEG-CHI) using carbodiimide-mediated coupling. The effect of reagent concentrations and pH on the degree of substitution (DS) and the PEGylation yield (conversion of free PEG to conjugated PEG) was evaluated through detailed chemical characterisation. Within the parameter space investigated, optimised reaction conditions (NH2: COOH:NHS:EDC of 3.5:1:1:10, pH = 5) resulted in a DS of 24 % and a PEGylation yield of 84 %. An EDC-derived adduct formed at pH ≥ 5.5 and at a 15-fold excess of EDC relative to COOH. The adduct was evaluated to be a guanidine derivative formed by the reaction of the amine group of CHI directly with EDC. DS ≥ 12 % imparted water solubility to CHI at physiological pH and mPEG-CHI (0.2-1.0 mg/mL) was not cytotoxic against the breast cancer cell lines MCF-7 and MDA-MB-231, indicating its suitability for medical applications.

Development and characterisation of cysteine-based gold electrodes for the electrochemical biosensing of the SARS-CoV-2 spike antigen.

This article describes three novel electrochemical biosensing platforms developed to determine the severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) spike antigen protein: glutaraldehyde, SARS-CoV-2 spike antibody and bovine serum albumin; N,N-dicyclohexyl carbodiimide/4-(dimethylamino)pyridine functionalised SARS-CoV-2 spike antibody and bovine serum albumin; and 1-ethyl-3-[3-dimethylaminopropyl]-carbodiimide hydrochloride/N-hydroxysuccinimide functionalised SARS-CoV-2 spike antibody and bovine serum albumin modified cysteine-based gold-flower modified glassy carbon electrodes. Two of the produced biosensors having better signals were used to determine the SARS-CoV-2 spike antigen in spiked-saliva and clinical samples containing gargle and mouthwash liquids and characterised using cyclic voltammetry, scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. The study provides highly significant information in terms of how coupling reagents ought to be used with linkers consisting of both amine and carboxylic acid terminals (i.e. cysteine). The electrochemical cathodic signals based on antibody-antigen protein interactions at approximately -270 mV were evaluated as a response using square wave voltammetry, and they increased in proportion to the SARS-CoV-2 spike antigen. The limit of detection values were 0.93 and 46.3 ag mL-1 in a linear range from 1 ag mL-1 to 100 pg mL-1 and from 100 ag mL-1 to 10 ng mL-1 and the recovery and relative standard deviation values for spiked-saliva samples were 99.50% and 99.40%, and 3.87% and 0.13% for BSA/S-AB/GluAl/Cys/Au/GCE and BSA/S-AB/f-Cys/Au/GCE, respectively. The results showed that both biosensing platforms could be selectively and accurately used to diagnose COVID-19 in RT-PCR-approved clinical samples.

Two-Component Coupling of Carbodiimides and Hydrazides Provides Convergent Access to Biologically Active Compounds.

A novel, convergent synthesis of aminotriazoloquinazolines is reported. These heterocycles are reliably prepared via a "click-like" reaction between readily available aryl carbodiimides and acyl or aryl hydrazides. Such products are of particular interest with respect to their inhibitory activity against the A2A and A2B adenosine receptors, and the title two-component coupling reaction has greatly accelerated the discovery of potent/selective chemical matter in this space.

Well-designed two-fold crosslinked biological valve leaflets with heparin-loaded hydrogel coating for enhancing anticoagulation, endothelialization, and anticalcification.

Commercial biological valve leaflets (BVLs) crosslinked with glutaraldehyde (GA) are at risk of accelerating damage and even failure, owing to the high cell toxicity of GA, acute thrombosis, and calcification in clinical applications. In this study, a novel joint strategy of double crosslinking agents (dialdehyde pectin (AP) and carbodiimide) and heparin-loaded hydrogel coating was developed, endowing BVLs with excellent mechanical properties and multiple performances. Herein, AP played two essential roles, the crosslinking agent and the main component of the hydrogel coating. Both experimental and theoretical results indicated that the mechanical properties and stability of double-crosslinked BVLs were comparable to those of GA, and heparin loaded in hydrogel coating could improve the hemocompatibility of AP + EDC/NHS-PP. Further, cytocompatibility and in vivo tests showed that compared with GA-PP, AP + EDC/NHS + CS + Hep-PP has exhibited good endothelialization ability, mild immune response and anti-calcification performance and therefore prompts it to be an extremely valuable candidate for more durable and multifunctional BVLs.

Carbodiimide-Mediated Beckmann Rearrangement of Oxyma-B as a Side Reaction in Peptide Synthesis.

The suppression of side reactions is one of the most important objectives in peptide synthesis, where highly reactive compounds are involved. Recently, the violuric acid derivative Oxyma-B was introduced into peptide synthesis protocols as a promising additive to efficiently control the optical purity of the amino acids prone to racemization. However, we discovered a side reaction involving the Beckmann rearrangement of Oxyma-B during the coupling reaction, which compromises the yield and purity of the target peptides. Here, we present the investigation of the mechanism of this rearrangement and the optimization of the coupling reaction conditions to control it. These results can be taken into account for the design of novel efficient oxime-based coupling reagents.

A comprehensive review on methods for promotion of mechanical features and biodegradation rate in amniotic membrane scaffolds.

Amniotic membrane (AM) is a biological tissue that surrounds the fetus in the mother's womb. It has pluripotent cells, immune modulators, collagen, cytokines with anti-fibrotic and anti-inflammatory effect, matrix proteins, and growth factors. In spite of the biological characteristics, some results have been released in preventing the adhesion on traumatized surfaces. Application of the AM as a scaffold is limited due to its low biomechanical resistance and rapid biodegradation. Therefore, for using the AM during surgery, its modification by different methods such as cross-linking of the membrane collagen is necessary, because the cross-linking is an effective way to reduce the rate of biodegradation of the biological materials. In addition, their cross-linking is likely an efficient way to increase the tensile properties of the material, so that they can be easily handled or sutured. In this regard, various methods related to cross-linking of the AM subsuming the composite materials, physical cross-linking, and chemical cross-linking with the glutraldehyde, carbodiimide, genipin, aluminum sulfate, etc. are reviewed along with its advantages and disadvantages in the current work.

Simple and Easy Synthesis of γ-Amido-dNTPs in Water and Their Polymerase Reaction Properties.

γ-Amido-modified 2'-deoxynucleoside triphosphates (dNTPs) and nucleoside triphosphates (NTPs) are becoming increasingly important as biological tools. We herein describe the simple and easy synthesis of γ-amido-dNTPs and -NTPs from commercially available corresponding dNTPs and NTPs in a one-pot reaction using water-soluble carbodiimide and ammonia solution. We examined the effects of synthesized γ-amido-dNTPs on the DNA polymerase reaction. The results obtained showed the incorporation of these derivatives into the DNA primer while maintaining nucleobase selectivity; however, their incorporation efficiency by DNA polymerase was lower than that of dNTP. This is the first study to demonstrate the successful synthesis of four sets of γ-amido-dNTPs and clarify their properties.

A novel detergent-based decellularization combined with carbodiimide crosslinking for improving anti-calcification of bioprosthetic heart valve.

Currently, valve replacement surgery is the only therapy for the end-stage valvular diseases because of the inability of regeneration for diseased heart valves. Bioprosthetic heart valves (BHVs), which are mainly derived from glutaraldehyde (GA) crosslinked porcine aortic heart valves or bovine pericardium, have been widely used in the last decades. However, it is inevitable that calcification and deterioration may occur within 10-15 years, which are still the main challenges for the BHVs in clinic. In this study, N-Lauroylsarcosine sodium salt (SLS) combined with N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) were utilized to decellularize and crosslink the heart valves instead of GA treatment. The obtained BHVs exhibited excellent extracellular matrix stability and mechanical properties, which were similar with GA treatment. Moreover, the obtained BHVs exhibited betterin vitrobiocompatibilities than GA treatment. After subcutaneous implantation for 30 d, the obtained BHVs showed mitigated immune response and reduced calcification compare with GA treatment. Therefore, all the above results indicated that the treatment of SLS-based decellularization combined with EDC/NHS crosslink should be a promising method to fabricate BHVs which can be used in clinic in future.

A decellularized porcine pulmonary valved conduit embedded with gelatin.

To prepare a tissue-engineered pulmonary valved conduit (PVC) with good tensile strength and biocompatibility. Sixty adult porcine PVCs were used to determine the optimal decellularization time. Five juvenile porcine decellularized PVCs and five juvenile porcine crosslinked PVCs were subsequently prepared according to the optimized decellularization and crosslinking methods. All PVCs were implanted into juvenile sheep for 8 months and then were harvested for staining. With a low concentration of detergent (0.25% Triton X-100+0.25% sodium deoxycholate), the decellularization effect on porcine PVCs was complete by 24 hours, and there was minimal damage to the matrix. Gelatin embedding and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) crosslinking improved the biomechanical properties of decellularized PVCs and reduced their immunogenicity. After implantation, the diameter and thickness of the PVCs in the decellularized and crosslinked groups increased significantly. In both groups, the conduits were unobstructed, with soft and smooth inner walls and without thrombosis, ulceration or neoplasia. The valves slightly degenerated with mild to moderate regurgitation. CD31-positive endothelial cells were visible on the inner surface of the conduits and valves. Scattered smooth muscle actin-positive cells were found in the middle layer of the conduit. The percentage of CD4- and CD68-positive cells and the calcium content were highest in decellularized porcine PVCs and lowest in ovine PVCs. The percentage of the matrix that was laminin-positive in decellularized and crosslinked porcine PVCs was lower than it was in ovine PVCs. Gelatin-embedded and EDC-crosslinked porcine PVCs can be "hosted" in sheep, with good biocompatibility, growth potential, and reduced calcification.

Gellan gum hydrogels cross-linked with carbodiimide stimulates vacuolation of human tooth-derived stem cells in vitro.

The natural polysaccharides are promising compounds for applications in regenerative medicine. Gellan gum (GG) is the bacteria-derived polysaccharide widely used in food industry. Simple modifications of its chemical properties make GG superior for the development of biocompatible hydrogels. Beside reversible cationic integration of GG chains, more efficient binding is accomplished with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC). However, the side-products of polymer cross-linking might affect viability and differentiation of stem cells introduced into the hydrogels. We found that O-acylisourea (EDU) stimulates autophagy-based vacuolation in both periodontal ligament and dental pulp stem cells. 24-h treatment of cells with GG extracts cross-linked with 15 mM EDC developed large cytoplasmic vacuoles. Freshly prepared EDU (2-6 mM) but not 15 mM EDC solutions initiated vacuole development with concomitant reduction of cell viability/metabolism. Most of the vacuoles stained with acridine orange displayed highly acidic environment further confirmed by flow cytometric analysis. Western blot of the LC3 autophagy marker followed by a transmission electron microscopy indicated the process is autophagy-dependent. We propose that the high reactivity of EDU with intracellular components initiates autophagy, although the targets of EDU remain unknown. Nevertheless, a burst release of EDU from GG hydrogels might modulate negatively cellular processes and final effectiveness of tissue regeneration.

Biomimetic amphiphilic chitosan nanoparticles: Synthesis, characterization and antimicrobial activity.

Naturally derived antimicrobial peptides (AMPs) are an attractive source of new antimicrobial agents. However, clinical application of AMPs is associated with poor bioavailability and toxicity. In this study, we address these limitations by designing a new series of chitosan derivatives to mimic the amphiphilic topology of AMPs. The synthesized chitosan derivatives were found to self-assemble into nanoparticles in the aqueous environment. Among the compounds, a chitosan derivative grafted with arginine and oleic acid (CH-Arg-OA) exhibited the most potent antimicrobial activity, especially against Gram-negative bacteria. It also caused minimal cell death when tested in HEK293 and HepG2 cell lines, thus confirming the role of cationicity and lipophilicity for selective bacteria targeting. CH-Arg-OA exhibited its antimicrobial activity by disrupting bacterial membranes and causing the leakage of cytoplasmic contents. Thus, amphiphilic chitosan nanoparticles offer a great promise as a new class of AMPs mimics that is effective against Gram-negative bacteria.

The choice of biopolymer is crucial to trigger angiogenesis with vascular endothelial growth factor releasing coatings.

Bio-based coatings and release systems for pro-angiogenic growth factors are of interest to overcome insufficient vascularization and bio-integration of implants. This study compares different biopolymer-based coatings on polyethylene terephthalate (PET) membranes in terms of coating homogeneity and stability, coating thickness in the swollen state, endothelial cell adhesion, vascular endothelial growth factor (VEGF) release and pro-angiogenic properties. Coatings consisted of carbodiimide cross-linked gelatin type A (GelA), type B (GelB) or albumin (Alb), and heparin (Hep), or they consisted of radically cross-linked gelatin methacryloyl-acetyl (GM5A5) and heparin methacrylate (HepM5). We prepared films with thicknesses of 8-10 µm and found that all coatings were homogeneous after washing. All gelatin-based coatings enhanced the adhesion of primary human endothelial cells compared to the uncoated membrane. The VEGF release was tunable with the loading concentration and dependent on the isoelectric points and hydrophilicities of the biopolymers used for coating: GelA-Hep showed the highest releases, while releases were indistinguishable for GelB-Hep and Alb-Hep, and lowest for GM5A5-HepM5. Interestingly, not only the amount of VEGF released from the coatings determined whether angiogenesis was induced, but a combination of VEGF release, metabolic activity and adhesion of endothelial cells. VEGF releasing GelA-Hep and GelB-Hep coatings induced angiogenesis in a chorioallantoic membrane assay, so that these coatings should be considered for further in vivo testing.

Synthesis and Characterization of Novel Resveratrol Butyrate Esters That Have the Ability to Prevent Fat Accumulation in a Liver Cell Culture Model.

To facilitate broad applications and enhance bioactivity, resveratrol was esterified to resveratrol butyrate esters (RBE). Esterification with butyric acid was conducted by the Steglich esterification method at room temperature with N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide (EDC) and 4-dimethyl aminopyridine (DMAP). Our experiments demonstrated the synthesis of RBE through EDC- and DMAP-facilitated esterification was successful and that the FTIR spectra of RBE revealed absorption (1751 cm-1) in the ester region. 13C-NMR spectrum of RBE showed a peak at 171 ppm corresponding to the ester group and peaks between 1700 and 1600 cm-1 in the FTIR spectra. RBE treatment (25 or 50 µM) decreased oleic acid-induced lipid accumulation in HepG2 cells. This effect was stronger than that of resveratrol and mediated through the downregulation of p-ACC and SREBP-2 expression. This is the first study demonstrating RBE could be synthesized by the Steglich method and that resulting RBE could inhibit lipid accumulation in HepG2 cells. These results suggest that RBE could potentially serve as functional food ingredients and supplements for health promotion.

Automated solid-phase concatenation of Aib residues to form long, water-soluble, helical peptides.

Iterative coupling of 2-aminoisobutyric acid (Aib) has been achieved rapidly and efficiently using automated solid-phase peptide synthesis, employing diisopropylcarbodiimide (DIC) in the presence of ethyl cyanohydroxyiminoacetate (Oxyma). This method has allowed the first total synthesis of the fungal antibiotic Cephaibol D, and enabled the synthesis of water-soluble oligomers of Aib containing up to an unprecedented sequence of 17 consecutive Aib residues. Conformational analysis of the Aib oligomers in aqueous solution shows a length dependence in their CD spectra, with oligomers of more than 14 Aib residues apparently adopting structured helical conformations.