Debris and Smear Layer Removal in Curved Root Canals Using the Dual Wavelength Er,Cr:YSGG/Diode 940 nm Laser and the XP-Endoshaper and Finisher Technique.

Objective: To validate the capability of the dual wavelength laser (Er,Cr:YSGG and diode 940 nm) and the XP-Endoshaper and finisher in removing the smear layer from curved canals. Methods: Forty curved root canals were prepared using the R25 file of the Reciproc® system. The teeth were randomly divided into five groups: G1: negative control irrigated with distilled water, G2: positive control irrigated with EDTA 17% and a final rinse of NaOCl 3%, G3: XP-Endoshaper and finisher with EDTA 17%, G4: dual wavelength Er,Cr:YSGG (1.25 W, 50 Hz, 50 µs) and diode 940 nm (2 W, 50% DC), and G5: dual wavelength Er,Cr:YSGG (2 W, 20 Hz, 50 µs) and diode 940 nm (2 W, 50% DC). Laser scanning microscope images (1000 × ) were scored with the Hülsmann scoring system. Results: Superior smear layer removal was observed in G5 in comparison with G4, especially in the apical third of the canal. Furthermore, the XP-Endoshaper and finisher exhibited positive results in all parts of the canal. Conclusions: The higher power output of the Er,Cr:YSGG in the dual wavelength laser may be a suitable approach to remove the smear layer from the apical third of curved canals. Moreover, the XP-Endoshaper and finisher with EDTA could expose the dentinal tubules, however, the negative side effects of applying EDTA 17% for longer periods must be taken into consideration. This work is clinically significant as it addresses the main aim of endodontic treatment and provides a suitable method to remove the debris, smear layer, and bacterial remnants from the clinically challenging curved root canals.

Influence of size and taper of basic root canal preparation on root canal cleanliness: a scanning electron microscopy study.

AIM: To investigate whether a minimally invasive basic root canal preparation technique has an influence on root canal cleanliness in extracted mandibular molar teeth. METHODOLOGY: A total of 80 root canals (40 mesio-buccal and 40 mesio-lingual) from 40 mandibular molars were included. The teeth were divided equally into four different experimental groups depending on the subsequently root canal preparation technique: Group 1: a basic preparation was performed up to size 20, .04 taper; Group 2: a basic preparation was performed up to size 2, .06 taper; Group 3: a basic preparation was performed up to size 25, .04 taper; and Group 4: a basic preparation was performed up to size 25, .06 taper. After the use of each instrument, each root canal was irrigated with 2.5 mL of 6% sodium hypochlorite for 30 s. Then, 1 mL NaOCl was activated for 20 s using an EDDY sonic tip. Final irrigation was performed using a total of 5 mL of 17% EDTA solution. The roots were then split longitudinally and all root canal thirds were observed through scanning electron microscopy (SEM) to evaluate the presence of superficial debris and smear layer using a scoring system. Data were statistically analysed using the Kruskal-Wallis and Bonferroni tests with a level of significance set at P < 0.05. RESULTS: In all groups, there was significantly more residual debris and smear layer in the apical third (P < 0.05), with no differences between the middle and coronal thirds (P > 0.05). For both the parameters analysed, there was no difference amongst the groups in the middle and coronal thirds (P > 0.05), whilst in the apical third significantly less debris and smear layer was found in specimens from groups 3 and 4 than for groups 1 and 2 (P < 0.05). CONCLUSION: All basic root canal preparation techniques were associated with less debris and smear layer on the canal walls in the middle and coronal thirds, without differences among them. Even though debris and smear layer were always present in the apical third, an apical size of 25 resulted in significantly cleaner canals walls compared to a size 20.

Regenerating a monoblock to obturate root canalsvia a mineralising strategy.

To develop a novel strategy for sealing and obturating dental root canals by tooth-like tissue regeneration, premolars with mature root apices were freshly collected, and root canals were prepared by following the clinical protocols in vitro. The teeth were immersed in supersaturated calcium and phosphate solution containing gallic acid and fluoride. At certain intervals, the dental roots were taken out, and their mineral precipitates were characterised by scanning electron microscopy, energy-dispersive spectroscopy mapping, X-ray diffraction and transmission electron microscopy. The cytocompatibility of the mineralizing products were evaluated with rabbit bone-marrow-derived mesenchymal stem cells in vitro. Results showed that the precipitates were mainly composed of fluoridated hydroxyapatite with ahexagonal prism morphology. Fluoridated hydroxyapatite initially nucleated and grew from the root canal dentine surface to the root canal centre. The fluoridated hydroxyapatite precipitate and root canal dentine intergraded together such that the interface became hardly distinguishable. The fluoridated hydroxyapatite precipitate grew into and obturated the dentinal tubules. In the root canal, the regenerated fluoridated hydroxyapatite densely packed and bundled together with a c-axis extension. After 7 days of mineralisation, the root canal was completely obturated, and the apical foramen was sealed. The mineralizing products had good biocompatibility with the cells, and the cells grew well on the mineralized surface. Biomimetic mineralisation strategy provides a novel means to regenerate tooth-like tissue to seal the root canal system permanently other than by passive synthetic material filling.

Evaluation of Root Canal Anatomy of Maxillary Premolars Using Swept-Source Optical Coherence Tomography in Comparison with Dental Operating Microscope and Cone Beam Computed Tomography.

OBJECTIVE: This study aimed to evaluate the ability of swept-source optical coherence tomography (OCT) to detect internal anatomy of maxillary premolars in comparison with dental operating microscope (DOM) and cone beam computed tomography (CBCT). BACKGROUND DATA: The ability of OCT to observe the pulp horn during cavity preparation and assess the remaining dentin thickness (RDT) has been demonstrated, whereas validation of OCT in comparison with other imaging techniques seems required. METHODS: Ten extracted human maxillary premolars were sectioned perpendicular to the tooth axis from the occlusal surface at approximately 2 mm increments. OCT and DOM were performed after each cut, and microfocus X-ray computed tomography (micro-CT; reference standard) and CBCT were conducted before sectioning and after the first and second cuts. Three examiners evaluated all images for presence of the pulp horn/pulp chamber, isthmus, lateral canals, and the number of root canals. RDT was determined from OCT, micro-CT, and CBCT images. Correlations were analyzed with Pearson's correlation coefficient. RESULTS: OCT had a sensitivity and specificity of 0.90 and 0.80 in detecting the pulp horn/pulp chamber and 0.84 and 0.71 in detecting the isthmus, respectively. The three techniques showed strong correlations in detecting the number of root canals compared with micro-CT. OCT and DOM did not detect lateral canals. For RDT values, strong correlations were observed between micro-CT and CBCT, micro-CT and OCT, and CBCT and OCT (p < 0.01 for all). CONCLUSIONS: Under the present experimental condition, OCT accurately measured RDT and detected internal tooth anatomy such as the pulp horn, isthmus, and root canals.

Diagnóstico, planificación del tratamiento y endodoncia de un primer premolar inferior con dos canales mediante tomografía computarizada 3D: reporte de un caso

El tratamiento endodóntico debe considerar que los dientes presentan una morfología del sistema de canales radiculares con alta variabilidad y complejidad. por lo tanto, el conocimiento acabado de la anatomía radicular y la planificación del procedimiento utilizando sistemas imagenológicos previos a la realización del tratamiento endodóntico, como la tomografía computarizada 3D (CBTC), mejoran el pronóstico, aumentando las probabilidades de éxito. el objetivo de este reporte es mostrar la secuencia de una resolución clínica de un primer premolar inferior (diente 4.4) con una anatomía compleja, utilizando el CBTC tanto en el diagnóstico como en la planificación.

The effect of the KTP laser on smear layer and temperature change: an in vitro study.

The purpose of this study was to evaluate the effects of potassium-titanyl-phosphate (KTP) laser irradiation on smear layer removal and temperature changes of the root surfaces. Two hundred four extracted single-root human premolars were included. The canals were instrumented and divided into two main groups: group A (smear layer examination n:119) and group B (temperature change examination n:85). Each group was divided into subgroups (n:17) according to the different five laser power settings: A1, B1: 1 W-5.33 J/cm2; A2, B2: 1.5 W-7.52 J/cm2; A3, B3: 2 W-10.3 J/cm2; A4, B4: 3 W-15.5 J/cm2, A5, B5: 4 W-20.1 J/cm2, A6: positive control no laser irradiation-irrigated 2 mL for 2 min 2.5% NaOCl + 2 mL distilled water and A7: negative control groups no laser irradiation irrigated 2 mL for 2 min 17% EDTA + 2 mL for 2 min 2.5% NaOCl + 2 mL distilled water. The temperature elevations were measured with an infrared thermographic camera and smear layer examined by scanning electron microscope. According to Kruskal-Wallis and Tukey's tests, in all groups the highest smear scores were in the apical third. In all areas, there were statistically significant differences between negative control group (17% EDTA) and all other groups (p < 0.05). The highest smear scores were determined in 1 W KTP laser and positive control (2.5% NaOCl) groups. Statistically, in all thirds, the differences the 3 W and 4 W KTP laser groups between each other and all other groups were significant (p < 0.05). After the end of the use of the laser, increase in temperature values in all groups were found to be below 10 °C in 20 s.

FESEM evaluation of smear layer removal using different irrigant activation methods (EndoActivator, EndoVac, PUI and LAI). An in vitro study.

OBJECTIVES: This study was to compare the efficacy of EndoActivator, EndoVac, PUI, and LAI methods in removing the smear layer from root canals. MATERIALS AND METHODS: Eighty single-rooted mandibular premolars were decoronated to a standardized length of 15 mm. Specimens were shaped to ProTaper F4 (Dentsply Maillefer) and irrigated with 5.25% NaOCl at 37 °C. Teeth were divided into six groups (two control groups [n = 10] and four test groups [n = 15]) according to the final irrigation activation/delivering technique (sonic irrigation [EndoActivator], passive ultrasonic irrigation [PUI], negative apical pressure [EndoVac], and laser activated irrigation [LAI]). Root canals were then split longitudinally and observed with field emission scanning electron microscopy to evaluate the presence of smear layer at 1, 3, 5, and 8 mm from the apex. Scores were analyzed by Kruskal-Wallis and Mann-Whitney U tests. RESULTS: The EndoActivator was significantly more efficient than PUI, LAI, and control groups in removing the smear layer at 3, 5, and 8 mm from the apex. The EndoVac System removed statistically significantly more smear layer than all groups at 1 mm from the apex. At 5 mm from the apex, EndoActivator and EndoVac removed more smear layer than LAI and control groups. At 5 and 8 mm from the apex, PUI and EndoVac did not differ statistically, but both performed statistically better than the control groups. CONCLUSION: In our study, none of the activation/delivery systems completely removed the smear layer from the root canal walls; nevertheless, EV and EA showed, respectively, statistically significant better results at 1, 3, 5, and 8 mm and 3, 5, and 8 mm from the apex.

Do different strains of E. faecalis have the same behavior towards intracanal medications in in vitro research?

Abstract: The aim of this study was to evaluate the antimicrobial action of different endodontic pastes against Enterococcus faecalis ATCC 29212, isolated from the urinary tract, and compare the action with E. faecalis ATCC 4083, isolated from the root canal. For this purpose, dentin blocks were infected for 21 days with both bacteria at different time-intervals to ensure there would be no cross contamination. After this period, blocks were immersed in the test medications for 7 days, according to the following groups: CH/S, CH/P, CH/CMCP, CH/CHX, CH/DAP and TAP. Images of the samples were captured with a confocal microscope and the percentage of live cells was computed by means of the Bioimage program. The ATCC 29212 strain was shown to be more resistant to CH/SS, Calen, CH/DAP, and TAP than the ATCC 4083 strain. The antimicrobial action of the medications against each strain were divergent concerning the order of susceptibility. The authors concluded that the strains behaved in a different manner: in general, those extracted from the urinary tract were more resistant to the tested medications. Therefore, when E. faecalis must be used for in vitro research in endodontics, we suggest the use of ATCC 4083 strain to obtain results that are closer to the clinical reality.

Effectiveness of different final irrigation techniques and placement of endodontic sealer into dentinal tubules

Abstract: The aim of this study was to compare two irrigation techniques and four devices for endodontic sealer placement into the dentinal tubules. Ninety-nine single-rooted human teeth were instrumented and allocated to either the control (CO) (n=11) or experimental groups according to the irrigation method: syringe and NaveTip needle (NT) (n=44), and EndoActivator (EA) (n=44). These groups were subdivided according to sealer placement into K-File (KF), lentulo spiral (LS), Easy Clean (EC), and EndoActivator (EA) subgroups. Moreover, the distances of 5 mm and 2 mm from the apex were analyzed. The teeth were obturated with AH Plus and GuttaCore X3. Analyses were performed by scanning electron microscopy associated to cathodoluminescence. The percentage and maximum depth of sealer penetration were measured. Data were evaluated by three-way analysis of variance (ANOVA) and Games-Howell test (p<0.05). EA was superior to NT in percentage of sealer penetration. EC was significantly superior to EA (subgroup) for sealer penetration, and both improved the percentage of sealer penetration when compared to LS. Better sealer penetration was observed at the distance of 5 mm from the apex. Sealer penetration into the dentinal tubules was significantly improved by sonic irrigant activation.

Comparison of Smear Layer Removal Ability of QMix with Different Activation Techniques.

INTRODUCTION: To evaluate the effectiveness of QMix solution (Dentsply Tulsa Dental Specialties, Tulsa, OK) on the smear layer using the following irrigation activation techniques: the EndoActivator (EA) system (Dentsply Tulsa Dental Specialties), photon-initiated photoacoustic streaming (PIPS), and an Er:YAG laser with an endodontic fiber tip. METHODS: Sixty-four extracted single-rooted human teeth were decoronated and the canals instrumented with ProTaper (Denstply Maillefer, Ballagues, Switzerland) up to size F4. The canals were irrigated with 5.25% sodium hypochlorite and a saline solution for 1 minute each. The specimens were then divided randomly into 4 experimental and 4 control groups (n = 8) according to the final irrigation activation technique. These groups included group 1, 2.5 mL QMix; group 2, QMix + EA; group 3, QMix + PIPS; and group 4: QMix + Er:YAG. Laser activated distilled water was used as control groups 5, 6, 7, and 8. Teeth were split longitudinally, and specimens were observed under a scanning electron microscope. Images were taken at the coronal, middle, and apical thirds of the teeth at a magnification of 1000× and were scored in the presence of the smear layer. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests. RESULTS: The highest scores were found in the apical third of all groups (P < .05). The QMix + Er:YAG group removed the smear layer more effectively than the nonactivated QMix group in the apical third (P < .05). The QMix + EA group removed the smear layer significantly in all thirds of the teeth when compared with the nonactivated QMix group (P < .05). The QMix + PIPS group showed a significantly better effect than the QMix group in the coronal third (P < .05). CONCLUSIONS: The EA and Er:YAG laser enhanced the smear layer removal ability of QMix in the apical thirds of the canals. QMix removed more smear layer in the coronal thirds when activated with the PIPS technique.

ß-lactam substituted polycyclic fused pyrrolidine/pyrrolizidine derivatives eradicate C. albicans in an ex vivo human dentinal tubule model by inhibiting sterol 14-α demethylase and cAMP pathway.

BACKGROUND: Further quest for new anti-fungal compounds with proven mechanisms of action arises due to resistance and dose limiting toxicity of existing agents. Among the human fungal pathogens C. albicans predominate by infecting several sites in the body and in particular oral cavity and root canals of human tooth. METHODS: In the present study, we screened a library of ß-lactam substituted polycyclic fused pyrrolidine/pyrrolizidine compounds against Candida sp. Detailed molecular studies were carried out with the active compound 3 on C. albicans. Morphological damage and antibiofilm activity of compound 3 on C. albicans was studied using scanning electron microscopy (SEM). Biochemical evidence for membrane damage was studied using flow cytometry. In silico docking studies were carried out to elucidate the mechanism of action of compound 3. Further, the antifungal activity of compound 3 was evaluated in an ex vivo dentinal tubule infection model. RESULTS: Screening data showed that several new compounds were active against Candida sp. Among them, Compound 3 was most potent and exerted time kill effect at 4h, post antifungal effect up to 6h. When used in combination with fluconazole or nystatin, compound 3 revealed an minimum inhibitory concentration (MIC) decrease by 4 fold for both drugs used. In-depth molecular studies with compound 3 on C. albicans showed that this compound inhibited yeast to hyphae (Y-H) conversion and this involved the cAMP pathway. Further, SEM images of C. albicans showed that compound 3 caused membrane damage and inhibited biofilm formation. Biochemical evidence for membrane damage was confirmed by increased propidium iodide (PI) uptake in flow cytometry. Further, in silico studies revealed that compound 3 docks with the active site of the key enzyme 14-α-demethylase and this might inhibit ergosterol synthesis. In support of this, ergosterol levels were found to be decreased by 32 fold in compound 3 treated samples as analyzed by high performance liquid chromatography (HPLC). Further, the antifungal activity of compound 3 was evaluated in an ex vivo dentinal tubule infection model, which mimics human tooth root canal infection. Confocal laser scanning microscopy studies showed 83% eradication of C. albicans and a 6 log reduction in colony forming unit (CFU) after 24h treatment in the infected tooth samples in this model. CONCLUSION: Compound 3 was found to be very effective in eradicating C. albicans by inhibiting cAMP pathway and ergosterol biosynthesis. GENERAL SIGNIFICANCE: The results of this study can pave the way for developing new antifungal agents with well deciphered mechanisms of action and can be a promising antifungal agent or medicament against root canal infection.

Influence of apical enlargement in cleaning of curved canals using negative pressure system.

This study aimed to evaluate, by scanning electron microscopy (SEM), the cleaning of canal walls with moderate curvature subjected to biomechanical preparation with different final diameters using apical negative pressure irrigation. Thirty-two mesiobuccal roots of molars were divided into 4 groups (n=8) according to the instrument's final diameter: GI: 30.02, GII: 35.02, GIII: 40.02 and GIV: 45.02. Irrigating procedure was performed at each change of instrument with 1% NaOCl using the Endovac system. Final irrigation was conducted with 17% EDTA for 5 min. The SEM photomicrographs were evaluated under 35× and 1000× magnification, by three calibrated examiners, in a double-blind design. Data were submitted to Kruskal-Wallis and Dunn's post hoc tests (α=0.05). Canals instrumented with 30.02 and 35.02 final diameters showed more debris, statistically different from the other groups (p<0.05). Comparing each root canal third, for the cervical and apical portions no statistically significant difference (p>0.05) was found among the four groups. Regarding the presence of smear layer, canals with 30.02 final diameter showed the highest scores, statistically different from the 45.02 group (p<0.05) and similar to the 35.02 and the 40.02 groups (p>0.05). Although none of the studied diameters completely removed debris and smear layer, it may be concluded that instrumentation with higher final diameters was more effective in cleaning the root canals with moderate curvature.

Comparison of the efficacy of nickel-titanium rotary systems with or without the retreatment instruments in the removal of gutta-percha in the apical third.

BACKGROUND: The purpose of this study was to compare the efficacy of nickel-titanium rotary systems with or without the retreatment instruments in the removal of gutta-percha from the apical third. METHODS: The systems compared were as follows: ProTaper Universal (PT), ProTaper Universal Retreatment (PTr), Mtwo (M2) and Mtwo Retreatment (M2r). Sixty extracted mandibular incisors were treated with a crown-down technique and filled with gutta-percha and sealer. The apical diameter was standardized in 0.30 mm, 1 mm from the apex. The teeth were distributed into 4 experimental groups: PT, PTr, M2 and M2r. In PTr and M2r groups, filling materials were removed by PTr/M2r followed by root canals preparation up to a PT F4/M2 40; in groups PT/M2, the filling materials were removed and the root canals were prepared by PT up to a PT F4/M2 up to a M2 40. The roots were split and photomicrographing. The percentage of clean area in the apical 5 mm was calculated using software. Data were analyzed with the Kruskal-Wallis test. RESULTS: Remaining material was found in all hemisections and there was no statistically significant difference between the groups (p = 0.09). Considering the surface of the canal walls of all teeth, the mean of the percentage of clean area was 54%. CONCLUSIONS: Considering the applied methodology, remaining filling material was found in all hemisections, regardless of the retreatment technique and PT or M2 were as effective as PTr/PT or M2r/M2.

Efficacy of ethylene-diamine-tetra-acetic acid associated with chlorhexidine on intracanal medication removal: a scanning electron microscopy study.

The aim of this study was to evaluate the effectiveness of 17% ethylene-diamine-tetra-acetic acid (EDTA) used alone or associated with 2% chlorhexidine gel (CHX) on intracanal medications (ICM) removal. Sixty single-rooted human teeth with fully formed apex were selected. The cervical and middle thirds of each canal were prepared with Gates Glidden drills and rotary files. The apical third was shaped with hand files. The specimens were randomly divided into two groups depending on the ICM used after instrumentation: calcium hydroxide Ca(OH)(2) +CHX or Ca(OH)(2) +sterile saline (SS). After seven days, each group was divided into subgroups according to the protocol used for ICM removal: instrumentation and irrigation either with EDTA, CHX+EDTA, or SS (control groups). All specimens were sectioned and processed for observation of the apical thirds by using scanning electron microscopy. Two calibrated evaluators attributed scores to each specimen. The differences between the protocols for ICM removal were analyzed with Kruskal-Wallis and Mann-Whitney U tests. Friedman and Wilcoxon signed rank tests were used for comparison between the score of debris obtained in each root canal third. Remains of Ca(OH)(2) were found in all specimens independently of the protocol and ICM used (P > 0.05). Seventeen percent EDTA showed the best results in removing ICM when used alone (P < 0.05), particularly in those associated with CHX. It was concluded that the chelating agent 17% EDTA significantly improved the removal of ICM when used alone. Furthermore, the type of the vehicle associated with Ca(OH)(2) also plays a role in the ICM removal.

Scanning electron microscopic analysis to compare the cleaning efficiency of three different irrigation systems at different root canal levels: an in vitro study.

AIM: This study compared the efficacy of conventional, endovac and ultrasonic irrigation system for the removal of debris from root canal walls, using scanning electron microscopy (SEM) at cervical, middle and apical 3rd. MATERIALS AND METHODS: A total of 30 freshly extracted human mandibular premolars with complete root formation were selected and divided into group 1 endovac, group 2 conventional and group 3 ultrasonic. After instrumentation and irrigation, the teeth were sectioned in buccolingual direction and analyzed by SEM and the results were analyzed statistically by students unpaired 't' test. RESULTS: There was significant difference between mean values of cervical (CV), middle (M), and apical (A) when endovac compared with conventional and conventional compared with ultrasonic group (i.e. < 0.05) and no significant difference between mean values at CV, M and A when endovac compared with ultrasonic group. CONCLUSION: Among all groups ultrasonic and endovac group showed cleaner canal walls and less amount of debris than conventional group. CLINICAL SIGNIFICANCE: Application of ultrasonic and endovac can be used effectively for irrigation of canals leading to least debris and better prognosis.

Efficacy of an Organic Solvent and Ultrasound for Filling Material Removal

The aim of this study was to investigate whether a final rinse with Endosolv R® solvent and ultrasound resulted in cleaner root canal walls during endodontic retreatment. A total of 56 extracted premolar teeth were manually instrumented using a step-back flare technique and filled with gutta-percha and AH Plus sealer. After 9 months, the canals were retreated by removing the gutta-percha and sealer with ProTaper Universal Retreatment and rotary preparation with ProTaper Universal System up to an F5 file. As a final step, the teeth were randomly divided in 4 groups (n=14) and were subjected to passive ultrasonic irrigation (PUI) with either Endosolv R or distilled water. In the control groups, the irrigants were left undisturbed. Roots were cleaved and examined under scanning electron microscopy (SEM), and the amount of filling remnants on the canal walls was assessed by two calibrated examiners in a blinded fashion. Data were analyzed by the Kruskal-Wallis test and the Student-Newman-Keuls post hoc test (α=0.05). All groups presented filling debris in the three root canal thirds after retreatment. There were no significant differences between the groups or among the root canal thirds within each group (p>0.05). PUI with Endosolv R was not effective in the removal of filling debris from root canal walls.

O objetivo deste estudo foi investigar se a irrigação final com o solvente Endosolv R® e ultrassom promovia maior limpeza nas paredes do canal radicular durante o retratamento endodôntico. Um total de 56 dentes pré-molares extraídos foram instrumentados manualmente utilizandose a técnica escalonada e obturados com guta-percha e cimento AH Plus. Após nove meses, os canais foram retratados através da remoção da guta-percha e do cimento com Protaper Universal Retratamento e preparo rotatório com Sistema Protaper Universal até o instrumento F5. Após essa etapa, a amostra foi aleatoriamente dividida em quatro grupos (n=14) e os dentes submetidos à irrigação ultrassônica passiva (PUI) associada ao solvente Endosolv R ou à água destilada. Nos grupos controle, os irrigantes permaneceram sem agitação. Em seguida as raízes foram clivadas e examinadas sob microscopia eletrônica de varredura (MEV) para que a quantidade de material obturador remanescente nas paredes do canal fosse avaliada por dois examinadores treinados de forma cega. Os dados foram analisados através dos testes de Kruskal-Wallis e de Student-Newman-Keuls post hoc (α=0.05). Todos os grupos apresentaram resíduos de materiais obturadores nos três terços do canal radicular após o retratamento. Não houve diferenças significativas entre os grupos ou entre os terços dos canais em cada um dos grupos (p>0,05). Concluiu-se que PUI com Endosolv R não foi efetiva para a remoção de remanescentes de material obturador das paredes do canal radicular.

Temperature changes in the pulpal chamber and the sealing performance of various methods of direct pulp capping of primary teeth.

AIM: To compare changes in pulpal chamber temperature during the visible-light curing of direct pulp capping compounds and various modes of diode laser irradiation without prior placement of a pulp capping compound and the resultant seals. MATERIALS AND METHODS: Pulp exposure holes were made in 100 extracted human primary first molars, which were randomly assigned to ten equal groups. The holes were sealed by (a= Group 1, 2, 3, 4, 5, 6 and 7) different pulp capping compounds which were cured using various types of visible-light curing units or (b=Group 8, 9 and 10) diode laser irradiation without prior application of a pulp capping compound. Pulpal chamber temperatures were recorded during the procedure, and the resultant seals were examined under a scanning electron microscope. RESULTS: Visible-light curing of the pulp capping compounds and diode laser irradiation at a 0.7 W output power can cause non-injurious temperature rises in the pulpal chamber. At higher output powers of the diode laser, the temperature rises are sufficient to cause thermal injury. The seals were complete when pulp capping compounds were used for direct pulp capping, but were incomplete when laser irradiation without prior placement of a pulp capping compound was used for the identical purpose. CONCLUSION: The visible-light curing of pulp capping compounds is not harmful to vital pulp, and provides an effective seal of the pulp exposure hole. Laser irradiation is not an effective sealant, and can cause thermal injury to vital pulp at high output powers.

Influence of Endodontic Sealer Composition and Time of Fiber Post Cementation on Sealer Adhesiveness to Bovine Root Dentin

This study aimed to assess the influence of the type of endodontic sealer (salicylate resin-based sealer vs. two endodontic sealers) and the time of fiber post cementation after root filling on the post adhesion to bovine root dentin. Sixty bovine roots were assigned to six groups (n=10), considering an experimental design with two factors (factorial 3x2): endodontic sealer factor in three levels [epoxy resin-based sealer (AH Plus), eugenol-based sealer (Endofill), and salicylate resin-based sealer plus mineral trioxide aggregate - MTA (MTA Fillapex)] and time for post cementation factor in two levels (immediate post cementation or 15 days after root canal filling). After post cementation, 2-mm-thick slices were produced and submitted to push-out test. The failure modes were analyzed under a 40× stereomicroscope and scored as: adhesive at cement/dentin interface; adhesive at cement/post interface; cement cohesive; post cohesive; dentin cohesive; or mixed. Data were analyzed using two-way ANOVA and Tukey's post-hoc tests (α=0.05). When the fiber posts were cemented immediately after the root canal filling, the bond strengths were similar, independent of the endodontic sealer type. However, after 15 days, the epoxy resin-based sealer presented higher bond strength than the other sealers (p<0.05). Comparison between each sealer in different experimental times did not reveal any differences. The main failure type was adhesive at dentin/cement interface (89.4%). The time elapsed between the root canal filling and post cementation has no influence on post/root dentin adhesion. On the contrary, the type of endodontic sealer can influence the adhesion between fiber posts and root dentin.

Este estudo objetivou avaliar a influência do tipo de cimento endodôntico (um cimento à base de resina de salicilato e dois cimentos endodônticos) e do tempo decorrido entre a obturação do conduto e a cimentação do pino de fibra na adesão de pinos de fibra à dentina radicular bovina. Sessenta dentes bovinos foram divididos em seis grupos (n=10), considerando um desenho experimental de dois fatores (3x2): cimento endodôntico em três níveis [à base de resina epóxica (AH Plus), eugenol (Endofill) e resina de salicilato e MTA (MTA Fillapex)] e o tempo para cimentação em dois níveis (cimentação imediata e 15 dias pós a obturação). Após cimentação do pino de fibra, fatias com 2 mm de espessura foram obtidas e submetidas ao teste de push-out. Os padrões de falha foram analisados em estereomicroscópio (40×) e classificados em: adesiva na interface cimento/dentina, adesiva cimento/pino, coesiva do cimento, coesiva do pino, coesiva da dentina e mista. Os dados foram analisados através dos testes de ANOVA a dois fatores e post hoc de Tukey (α=0,05). Quando os pinos de fibra foram cimentados imediatamente após a obturação dos condutos, a resistência adesiva foi similar, independentemente do tipo de cimento endodôntico. Entretanto, após 15 dias, os dentes obturados com cimento resinoso à base de resina epóxica apresentaram os maiores valores de resistência adesiva (p<0,05). Os valores de resistência adesiva do mesmo cimento nos diferentes tempos experimentais não foram alterados. O principal tipo de falha foi adesiva na interface cimento/dentina (89,4%). O tempo decorrido entre a obturação dos condutos e a cimentação do pino não influenciou a adesão do pino de fibra à dentina radicular. Por outro lado, o tipo de cimento endodôntico influencia a adesão entre dentina radicular e pinos de fibra.

Evaluation of microleakage of root canal fillings irradiated with different output powers of erbium, chromium:yttrium-scandium-gallium-garnet laser.

This study evaluated the root canal seal achieved by irradiation with an erbium, chromium:yttrium-scandium-gallium-garnet laser, and the optimal output power to remove debris and the smear layer were determined. One hundred mandibular premolar teeth were prepared and divided into four groups. Group 1 was not lased but was irrigated with 5 mL of 5.25% NaOCl and 5 mL of 17% ethylenediaminetetraacetic acid. Group 2 was irradiated at a panel setting of 1 W, group 3 at 2 W and group 4 at 2.5 W, with a 50% water level and 48% air-cooling level. Root canals were obturated by cold lateral compaction, and apical microleakage was measured using a fluid filtration model. The remaining debris and smear layer were evaluated via scanning electron microscopy. Statistically significant differences were detected between groups. Irradiation at 1 and 2 W using an erbium, chromium:yttrium-scandium-gallium-garnet laser produced a seal superior to that of the other treatments.

Micro-computed tomography and scanning electron microscopy comparisons of two nickel-titanium rotary root canal instruments used with reciprocating motion.

The single-file root canal instrumentation technique using reciprocating motion has been gaining concern. Therefore, the purpose of this study was to compare the shaping ability of single ProTaper F2 file and WaveOne Primary file when they were used in the curved root canal with reciprocation motion and to investigate the durability of the file after use with a scanning electron microscopy (SEM). Changes in structure model index (SMI), root canal volume, curvature, surface area, and degree of transportation were measured from the cross-sectional images of the prepared canals using the micro-CT system with an isotropic resolution of 16 µm. Results showed that there were no differences in the changes of root canal volume, surface area, and SMI between the two file groups after the preparation (p > 0.05). The ProTaper group showed a curvature straightening value of 25.45 ± 12.51%, while the WaveOne group showed 27.30 ± 10.91%, and there was no statistically significant difference (p > 0.05). The transportation values between the two groups showed no significant differences (p > 0.05). SEM revealed that 60% of ProTaper files showed initiation of microcracks on the surface while those were detected on the only one WaveOne file. The single-file technique using either WaveOne Primary or ProTaper F2 can be safely used under each reciprocating motion without creating an increased apical transportation in curved canals. However, the metallurgic property resists cyclic fatigue was more favorable with WaveOne under the scanning evaluation.