Celecoxib Augments Paclitaxel-Induced Immunogenic Cell Death in Triple-Negative Breast Cancer.

Triple-negative breast cancer (TNBC) is a highly aggressive malignancy that lacks effective targeted therapies. Inducing immunogenic cell death (ICD) in tumor cells represents a promising strategy to enhance therapeutic efficacy by promoting antitumor immunity. Paclitaxel (PTX), a commonly used chemotherapy drug for TNBC, can induce ICD; however, the resulting immunogenicity is limited. Thus, there is an urgent need to explore strategies that improve the effectiveness of ICD in TNBC by incorporating immunoregulatory agents. This study investigated the potential of celecoxib (CXB) to enhance PTX-induced ICD by blocking the biosynthesis of PGE2 in the tumor cells. We observed that the combination of CXB and PTX promoted the maturation of dendritic cells and primed a T cell-dependent immune response, leading to enhanced tumor rejection in a vaccination assay. To further optimize drug delivery in vivo, we developed cRGD-modified liposomes for the targeted codelivery of CXB and PTX. This delivery system significantly improved drug accumulation and triggered robust antitumor immunity in an orthotopic mouse model of TNBC. Moreover, it served as an in situ vaccine to inhibit tumor recurrence and lung metastasis. Overall, our findings provide in-depth insights into the therapeutic mechanism underlying the combination of CXB and PTX, highlighting their potential as effective immune-based therapies for TNBC.

Nucleotides as new co-formers in co-amorphous systems: Enhanced dissolution rate, water solubility and physical stability.

Developing co-amorphous systems is an attractive strategy to improve the dissolution rate of poorly water-soluble drugs. Various co-formers have been investigated. However, previous studies revealed that it is a challenge to develop satisfied acidic co-formers, e.g., acidic amino acids showed much poorer co-former properties than neutral and basic amino acids. Only a few acidic co-formers have been reported, such as aspartic acid, glutamic acid, and some other organic acids. Thus, this study aims to explore the possibility of adenosine monophosphate and adenosine diphosphate used as acidic co-formers. Mebendazole, celecoxib and tadalafil were used as the model drugs. The drug-co-former co-amorphous systems were prepared via ball milling and confirmed using XRPD. The dissolution study suggested that the solubility and dissolution rate of the drug-co-formers systems were increased significantly compared to the corresponding crystalline and amorphous drugs. The stability study revealed that using the two nucleotides as co-formers enhanced the physical stability of pure amorphous drugs. Molecular interactions were observed in MEB-co-former and TAD-co-former systems and positively affected the pharmaceutical performance of the investigated co-amorphous systems. In conclusion, the two nucleotides could be promising potential acidic co-formers for co-amorphous systems.

Prevented Cell Clusters' Migration Via Microdot Biomaterials for Inhibiting Scar Adhesion.

Cluster-like collective cell migration of fibroblasts is one of the main factors of adhesion in injured tissues. In this research, a microdot biomaterial system is constructed using α-helical polypeptide nanoparticles and anti-inflammatory micelles, which are prepared by ring-opening polymerization of α-amino acids-N-carboxylic anhydrides (NCAs) and lactide, respectively. The microdot biomaterial system slowly releases functionalized polypeptides targeting mitochondria and promoting the influx of extracellular calcium ions under the inflammatory environment, thus inhibiting the expression of N-cadherin mediating cell-cell interaction, and promoting apoptosis of cluster fibroblasts, synergistically inhibiting the migration of fibroblast clusters at the site of tendon injury. Meanwhile, the anti-inflammatory micelles are celecoxib (Cex) solubilized by PEG/polyester, which can improve the inflammatory microenvironment at the injury site for a long time. In vitro, the microdot biomaterial system can effectively inhibit the migration of the cluster fibroblasts by inhibiting the expression of N-cadherin between cell-cell and promoting apoptosis. In vivo, the microdot biomaterial system can promote apoptosis while achieving long-acting anti-inflammation effects, and reduce the expression of vimentin and α-smooth muscle actin (α-SMA) in fibroblasts. Thus, this microdot biomaterial system provides new ideas for the prevention and treatment of tendon adhesion by inhibiting the cluster migration of fibroblasts.

Design and Evaluation of NSAID Derivatives as AKR1C3 Inhibitors for Breast Cancer Treatment through Computer-Aided Drug Design and In Vitro Analysis.

Breast cancer is a major global health issue, causing high incidence and mortality rates as well as psychological stress for patients. Chemotherapy resistance is a common challenge, and the Aldo-keto reductase family one-member C3 enzyme is associated with resistance to anthracyclines like doxorubicin. Recent studies have identified celecoxib as a potential treatment for breast cancer. Virtual screening was conducted using a quantitative structure-activity relationship model to develop similar drugs; this involved backpropagation of artificial neural networks and structure-based virtual screening. The screening revealed that the C-6 molecule had a higher affinity for the enzyme (-11.4 kcal/mol), a lower half-maximal inhibitory concentration value (1.7 µM), and a safer toxicological profile than celecoxib. The compound C-6 was synthesized with an 82% yield, and its biological activity was evaluated. The results showed that C-6 had a more substantial cytotoxic effect on MCF-7 cells (62%) compared to DOX (63%) and celecoxib (79.5%). Additionally, C-6 had a less harmful impact on healthy L929 cells than DOX and celecoxib. These findings suggest that C-6 has promising potential as a breast cancer treatment.

A Rheological Approach for Predicting Physical Stability of Amorphous Solid Dispersions.

Miscibility is an important indicator of physical stability against crystallization of amorphous solid dispersions (ASDs). Currently available methods for miscibility determination have both theoretical and practical limitations. Here we report a method of miscibility determination based on the overlap concentration, c*, which can be conveniently determined from the viscosity-composition diagram. The determined c* values for ASDs of two model drugs, celecoxib and loratadine, with four different grades of polyvinylpyrrolidone (PVP), were correlated strongly with the physical stability of ASDs. This result suggests potential application of the c* concept in guiding the design of stable high drug loaded ASD formulations. A procedure is provided to facilitate broader adoption of this methodology. The procedure is easy to apply and widely applicable for thermally stable binary drug/polymer combinations.

DoE-based development of celecoxib loaded PLGA nanoparticles: In ovo assessment of its antiangiogenic effect.

Abnormal angiogenesis plays a main role in the pathogenesis of many diseases such as cancer, and inflammatory autoimmune disorders among others, and its inhibition represents a potential strategy for their management. Celecoxib (CXB) that is one of the most prescribed selective COX-2 inhibitors and is currently approved for the treatment of osteoarthritis, rheumatoid arthritis, and ankylosing spondylitis inhibits angiogenesis. The objective of this manuscript was to design, develop, and characterize polymeric nanoparticles for the parenteral administration of CXB which the aim of facilitating its administration and improving its antiangiogenic activity while decreasing its adverse effects. A Plackett-Burman design was used to optimize the formulation. The PVA concentration, the sonication time, the sonicator amplitude and the CXB:PLGA ratio were selected as independent variables and particle size, polydispersity index, drug loading, and entrapment efficiency as responses. Optimized nanoparticles (formulations F2, F6 and F9) showed a particle size around 280 nm, a low polydispersion (PDI ≤ 0.2), a negative zeta potential around -25 mV, a high entrapment efficiency (above 88 %) and a controlled drug release for at least 10 days. Moreover, they were physically and chemically stable for at least 3 months when stored at 4 °C. Interestingly, CXB-loaded nanoparticles showed a higher angiogenesis inhibition than CXB in solution administered at the same concentration. F9 nanoparticles that were prepared using PVA at 0.5 %, a sonication time of 7 min, a sonicator amplitude of 80 % and a CXB:PLGA ratio of 20:100 were selected as the most suitable CXB-formulation. It represents a promising strategy to administer CXB and improve its efficacy in disorders with pathological angiogenesis such as cancer and arthritic diseases.

Development of a multiparticulate drug delivery system for in situ amorphisation.

In the current study, the concept of multiparticulate drug delivery systems (MDDS) was applied to tablets intended for the amorphisation of supersaturated granular ASDs in situ, i.e. amorphisation within the final dosage form by microwave irradiation. The MDDS concept was hypothesised to ensure geometric and structural stability of the dosage form and to improve the in vitro disintegration and dissolution characteristics. Granules were prepared in two sizes (small and large) containing the crystalline drug celecoxib (CCX) and polyvinylpyrrolidone/vinyl acetate copolymer (PVP/VA) at a 50 % w/w drug load as well as sodium dihydrogen phosphate monohydrate as the microwave absorbing excipient. The granules were subsequently embedded in an extra-granular tablet phase composed of either the filler microcrystalline cellulose (MCC) or mannitol (MAN), as well as the disintegrant crospovidone and the lubricant magnesium stearate. The tensile strength and disintegration time were investigated prior to and after 10 min of microwave irradiation (800 and 1000 W) and the formed ASDs were characterised by X-ray powder diffraction and modulated differential scanning calorimetry. Additionally, the internal structure was elucidated by X-ray micro-Computed Tomography (XµCT) and, finally, the dissolution performance of selected tablets was investigated. The MDDS tablets displayed no geometrical changes after microwave irradiation, however, the tensile strength and disintegration time generally increased. Complete amorphisation of CCX was achieved only for the MCC-based tablets at a power input of 1000 W, while MAN-based tablets displayed partial amorphisation independent of power input. The complete amorphisation of CCX was associated with the fusion of individual ASD granules within the tablets, which negatively impacted the subsequent disintegration and dissolution performance. For these tablets, supersaturation was only observed after 60 min. On the other hand, the partially amorphised MDDS tablets displayed complete disintegration during the dissolution experiments, resulting in a fast onset of supersaturation within 5 min and an approx. 3.5-fold degree of supersaturation within the experimental timeframe (3 h). Overall, the MDDS concept was shown to potentially be a feasible dosage form for in situ amorphisation, however, there is still room for improvement to obtain a both fully amorphous and disintegrating system.

Supersaturated amorphous solid dispersions of celecoxib prepared in situ by microwave irradiation.

This study investigated the ability of in situ amorphisation using microwave irradiation in order to prepare highly supersaturated ASDs, i.e. ASDs with drug loads higher than the saturation solubility in the polymer at ambient temperature. For this purpose, compacts containing the crystalline drug celecoxib (CCX) and polyvinylpyrrolidone (PVP), polyvinylpyrrolidone-vinyl acetate copolymer (PVP/VA), or polyvinyl acetate (PVAc), were prepared at drug loads between 30 and 90 % w/w. Sodium dihydrogen phosphate (NaH2PO4) monohydrate was included in all compacts, as a source of water, to facilitate the dielectric heating of the compacts upon dehydration during microwave irradiation. After processing, the samples were analysed towards their solid state using X-ray powder diffraction (XRPD) and modulated differential scanning calorimetry (mDSC). Complete amorphisation of CCX was achieved across all the investigated polymers and with a maximal drug load of 90, 80, and 50 % w/w in PVP, PVP/VA, and PVAc, respectively. These drug loads corresponded to a 2.3-, 2.4-, and 10.0-fold supersaturation in the investigated polymers at ambient temperature. However, dissolution experiments with the in situ prepared ASDs in fasted state simulated intestinal fluid (FaSSIF), showed a lower initial drug release (0-2 h) compared to equivalent physical mixtures of crystalline CCX and polymers or crystalline CCX alone. The lower drug release rate was explained by the fusion of individual drug and polymer particles during microwave irradiation and, subsequently, a lack of disintegration of the monolithic ASDs. Nevertheless, supersaturation of CCX in FaSSIF was achieved with the in situ amorphised ASDs with PVP and PVP/VA, albeit only after 3-24 h. Overall, the present study confirmed that it is feasible to prepare supersaturated ASDs in situ. However, in the current experimental setup, the monolithic nature of the resulting ASDs is considered a limiting factor in the practical applicability of this preparation method, due to limited disintegration and the associated negative effect on the drug release.

Celecoxib prevents tumor necrosis factor-α (TNF-α)-induced cellular senescence in human chondrocytes.

Osteoarthritis (OA) is a cartilage degenerative disease commonly observed in the elderly population and significantly impacts the normal life of OA patients. It has been reported that the development of pathological cell senescence in chondrocytes is involved in the pathogenesis of OA. Celecoxib is a common non-steroidal anti-inflammatory drug, and it has been recently reported to exert therapeutic effects on OA. However, its underlying mechanism is still unclear. The present study intends to explore its mechanism and provide fundamental evidence for the application of Celecoxib in the treatment of clinical OA. Tumor necrosis factor-α (TNF-α) was utilized to establish an in vitro model of chondrocytes senescence. The elevated reactive oxygen species (ROS) generation, increased cell cycle arrest in G0/G1 phase, reduced telomerase activity, and upregulated senescence-associatedß-galactosidase (SA-ß-Gal) staining were all observed in TNF-α-treated chondrocytes, which were then dramatically reversed by 10 and 20 µM Celecoxib. In addition, the upregulated DNA damage biomarkers, p-ATM, and p-CHK2, observed in TNF-α-treated chondrocytes were significantly downregulated by 10 and 20 µM Celecoxib. Lastly, the expression level of p21 and p53 was greatly elevated in chondrocytes by stimulation with TNF-α which was then pronouncedly repressed by treatment with Celecoxib. Taken together, our data reveal that Celecoxib ameliorated TNF-α-induced cellular senescence in human chondrocytes.

Investigation on Formulation Strategies to Mitigate Compression-Induced Destabilization in Supersaturated Celecoxib Amorphous Solid Dispersions.

Compression-induced destabilization was investigated in various celecoxib amorphous solid dispersions containing hydroxypropyl methylcellulose (HPMC), poly(vinylpyrrolidone)/vinyl acetate copolymer (PVP/VA), or poly(vinylpyrrolidone) (PVP) at a concentration range of 1-10% w/w. Pharmaceutically relevant (125 MPa pressure with a minimal dwell time) and extreme (500 MPa pressure with a 60 s dwell time) compression conditions were applied to these systems, and the changes in their physical stability were monitored retrospectively (i.e., in the supercooled state) using dynamic differential scanning calorimetry (DSC) and low-frequency Raman (LFR) measurements over a broad temperature range (-90 to 200 and -150 to 140 °C, respectively). Both techniques revealed similar changes in the crystallization behavior between samples, where the application of a higher compression force of 500 MPa resulted in a more pronounced destabilization effect that was progressively mitigated with increasing polymer content. However, other aspects such as more favorable intermolecular interactions did not appear to have any effect on reducing this undesirable effect. Additionally, for the first time, LFR spectroscopy was used as a viable technique to determine the secondary or local glass-transition temperature, Tg,ß, a major indicator of the physical stability of neat amorphous pharmaceutical systems.

The Effect of the Molecular Weight of Polyvinylpyrrolidone and the Model Drug on Laser-Induced In Situ Amorphization.

Laser radiation has been shown to be a promising approach for in situ amorphization, i.e., drug amorphization inside the final dosage form. Upon exposure to laser radiation, elevated temperatures in the compacts are obtained. At temperatures above the glass transition temperature (Tg) of the polymer, the drug dissolves into the mobile polymer. Hence, the dissolution kinetics are dependent on the viscosity of the polymer, indirectly determined by the molecular weight (Mw) of the polymer, the solubility of the drug in the polymer, the particle size of the drug and the molecular size of the drug. Using compacts containing 30 wt% of the drug celecoxib (CCX), 69.25 wt% of three different Mw of polyvinylpyrrolidone (PVP: PVP12, PVP17 or PVP25), 0.25 wt% plasmonic nanoaggregates (PNs) and 0.5 wt% lubricant, the effect of the polymer Mw on the dissolution kinetics upon exposure to laser radiation was investigated. Furthermore, the effect of the model drug on the dissolution kinetics was investigated using compacts containing 30 wt% of three different drugs (CCX, indomethacin (IND) and naproxen (NAP)), 69.25 wt% PVP12, 0.25 wt% PN and 0.5 wt% lubricant. In perfect correlation to the Noyes-Whitney equation, this study showed that the use of PVP with the lowest viscosity, i.e., the lowest Mw (here PVP12), led to the fastest rate of amorphization compared to PVP17 and PVP25. Furthermore, NAP showed the fastest rate of amorphization, followed by IND and CCX in PVP12 due to its high solubility and small molecular size.

Gut-Restricted Selective Cyclooxygenase-2 (COX-2) Inhibitors for Chemoprevention of Colorectal Cancer.

Selective cyclooxygenase (COX)-2 inhibitors have been extensively studied for colorectal cancer (CRC) chemoprevention. Celecoxib has been reported to reduce the incidence of colorectal adenomas and CRC but is also associated with an increased risk of cardiovascular events. Here, we report a series of gut-restricted, selective COX-2 inhibitors characterized by high colonic exposure and minimized systemic exposure. By establishing acute ex vivo 18F-FDG uptake attenuation as an efficacy proxy, we identified a subset of analogues that demonstrated statistically significant in vivo dose-dependent inhibition of adenoma progression and survival extension in an APCmin/+ mouse model. However, in vitro-in vivo correlation analysis showed their chemoprotective effects were driven by residual systemic COX-2 inhibition, rationalizing their less than expected efficacies and highlighting the challenges associated with COX-2-mediated CRC disease chemoprevention.

Utilizing Laser Activation of Photothermal Plasmonic Nanoparticles to Induce On-Demand Drug Amorphization inside a Tablet.

Poor aqueous drug solubility represents a major challenge in oral drug delivery. A novel approach to overcome this challenge is drug amorphization inside a tablet, that is, on-demand drug amorphization. The amorphous form is a thermodynamically instable, disordered solid-state with increased dissolution rate and solubility compared to its crystalline counterpart. During on-demand drug amorphization, the drug molecularly disperses into a polymer to form an amorphous solid at elevated temperatures inside a tablet. This study investigates, for the first time, the utilization of photothermal plasmonic nanoparticles for on-demand drug amorphization as a new pharmaceutical application. For this, near-IR photothermal plasmonic nanoparticles were tableted together with a crystalline drug (celecoxib) and a polymer (polyvinylpyrrolidone). The tablets were subjected to a near-IR laser at different intensities and durations to study the rate of drug amorphization under each condition. During laser irradiation, the plasmonic nanoparticles homogeneously heated the tablet. The temperature was directly related to the rate and degree of amorphization. Exposure times as low as 180 s at 1.12 W cm-2 laser intensity with only 0.25 wt % plasmonic nanoparticles and up to 50 wt % drug load resulted in complete drug amorphization. Therefore, near-IR photothermal plasmonic nanoparticles are promising excipients for on-demand drug amorphization with laser irradiation.

Repurposing celecoxib analogues as leads for antibiotics.

There is an urgent need for new antibiotics and alternative strategies to combat bacterial pathogens. Molecular docking, antibacterial evaluation in vitro and in vivo, cytotoxicity assessment and enzyme inhibition analyses were performed. Compound 12 exhibited antimicrobial activity against Staphylococcus aureus (MIC: 4 µg/ml), various clinically isolated strains of MRSA (MIC: 4-16 µg/ml) and Acinetobacter baumannii (MIC: 4 µg/ml) when combined with subinhibitory concentrations of colistin B. Compound 12 (20 mg/kg) yielded mild improvement in survival of methicillin-resistant Staphylococcus aureus (MRSA)-infected mice. Additionally, enzyme inhibition tests showed that compound 12 exhibited inhibitory effects against S. aureus dihydrofolate reductase (105.1 µg/ml) and DNA gyrase (122.8 µg/ml). Compound 12 is a promising antibacterial candidate for further development.

Curcumin-Celecoxib: a synergistic and rationale combination chemotherapy for breast cancer.

OBJECTIVE: Over-expression of COX-2 has been linked with various molecular signaling such as carcinogenesis, invasiveness, and malignant tumour metastasis. Besides, the use of celecoxib is also related to lowering the risk of breast cancer. This study therefore designed to explore the synergistic inhibitory effect of the combination of curcumin and celecoxib on the growth of human breast cancer cells. MATERIALS AND METHODS: In our investigation, we treated MDA-MB-231 cancer cells with different concentrations of curcumin and celecoxib. The enzyme-linked immunoassay was used to measure the COX-2 expression levels. MDA-MB-231 growth was examined by MTS cell viability assay, and synergy detection was carried out using combination index approaches. The drug-likeliness of the tested drugs (curcumin and celecoxib) were computed and predicted ADME pharmacokinetic parameters by in silico. Further, we have conducted BOILED-Egg plot and bioavailability radar analysis for the curcumin and celecoxib. RESULTS: The result of the physicochemical and ADMET/pharmacokinetic properties showed that these two drugs have good oral and optically bioavailable absorption. The present in silico study could offer a reliable theoretical basis for future structural modification of these compounds to treat breast cancer. The in vitro results suggested that curcumin and celecoxib individually inhibited the growth of MDA-MB-231 cells in a dose-dependent manner. The effect was synergistic for MDA-MB-231 cells relative to the two compounds individually. The synergistic growth inhibitory effect was mediated by a mechanism that possibly involves inhibition of the COX-2 pathways. CONCLUSIONS: Our findings show the prominent anti-proliferative effects of celecoxib and/or curcumin on MDA-MB-231 cells, providing a rationale for further detailed preclinical and potential clinical studies of this combination for breast cancer therapy. Further, these computed parameters suggested that curcumin possesses a high tendency to act as an adjuvant drug with celecoxib in the treatment of breast cancer.

Design and Synthesis of a Novel NIR Celecoxib-Based Fluorescent Probe for Cyclooxygenase-2 Targeted Bioimaging in Tumor Cells.

Cyclooxygenase-2 (COX-2) imaging agents are potent tools for early cancer diagnosis. Almost all of the COX2 imaging agents using celecoxib as backbone were chemically modified in the position of N-atom in the sulfonamide group. Herein, a novel COX-2 probe (CCY-5) with high targeting ability and a near-infrared wavelength (achieved by attaching a CY-5 dye on the pyrazole ring of celecoxib using a migration strategy) was evaluated for its ability to probe COX-2 in human cancer cells. CCY-5 is expected to have high binding affinity for COX-2 based on molecular docking and enzyme inhibition assay. Meanwhile, CCY-5 caused stronger fluorescence imaging of COX-2 overexpressing cancer cells (Hela and SCC-9 cells) than that of normal cell lines (RAW 264.7 cells). Lipopolysaccharide (LPS) treated RAW264.7 cells revealed an enhanced fluorescence as LPS was known to induce COX-2 in these cells. In inhibitory studies, a markedly reduced fluorescence intensity was observed in cancer cells, when they were co-treated with a COX-2 inhibitor celecoxib. Therefore, CCY-5 may be a selective bioimaging agent for cancer cells overexpressing COX-2 and could be useful as a good monitoring candidate for effective diagnosis and therapy in cancer treatment.

Synthesis of Hydroxybenzofuranyl-pyrazolyl and Hydroxyphenyl-pyrazolyl Chalcones and Their Corresponding Pyrazoline Derivatives as COX Inhibitors, Anti-inflammatory and Gastroprotective Agents.

Five new series of hydroxybenzofuranyl-pyrazolyl chalcones 3a,b, hydroxyphenyl-pyrazolyl chalcones 6a-c and their corresponding pyrazolylpyrazolines 4a, d, 7a-c and 8a-f have been synthesized and evaluated for their in vitro cyclooxygenase (COX)-1 and COX-2 inhibitory activity. All the synthesized compounds exhibited dual COX-1 and COX-2 inhibitory activity with obvious selectivity against COX-2. The pyrazolylpyrazolines 4a-d and 8a-f bearing two vicinal aryl moieties in the pyrazoline nucleus showed more selectivity towards COX-2. Within these two series, derivatives 4c, d and 8d-f bearing the benzenesulfonamide group were the most selective. Compounds 4a-d and 8a-f were further subjected to in vivo anti-inflammatory screening, ulcerogenic liability and showed good anti-inflammatory activity with no ulcerogenic effect. In addition compounds 4c and 8d as examples showed prostaglandin (PG)E2 inhibition % 44.23 and 51.4 respectively, tumor necrosis factor α (TNFα) inhibition % 33.48 and 41.41 respectively and gastroprotective effect in ethanol induced rodent gastric ulcer model. In addition, to explore the binding mode and selectivity of our compounds, 8d and celecoxib were docked into the active site of COX-1 and COX-2. It was found that compound 8d exhibited a binding pattern and interactions similar to that of celecoxib with COX-2 active site, while bitter manner of interaction than celecoxib to COX-1 active site.

New 1,2,4-triazole/pyrazole hybrids linked to oxime moiety as nitric oxide donor celecoxib analogs: Synthesis, cyclooxygenase inhibition anti-inflammatory, ulcerogenicity, anti-proliferative activities, apoptosis, molecular modeling and nitric oxide release studies.

Two new series of hybrid structures 16a-f and 19a-f containing 1,2,4-triazole moiety, pyrazole core with COX-2 pharmacophore and oxime as NO donor moiety were designed, synthesized and evaluated for anti-inflammatory, cytotoxic activities and NO release. All compounds were more selective for COX-2 isozyme especially the sulphamoyl derivatives (16b, 16e, 19b and 19e) had COX-2 selectivity indexes (S.I. = 9.78, 8.57, 10.78 and 10.47 respectively) in comparison to celecoxib (S.I. = 8.68). Similarly, 16b, 16e, 19b and 19e were the most potent anti-inflammatory derivatives with ED50 = 46.98-54.45 µmol/kg better than celecoxib (ED50 = 76.09 µmol/kg). Also, 16b, 16e, 19b and 19e were significantly less ulcerogenic (ulcer indexes = 2.79-3.95) upon comparison with ibuprofen (ulcer index = 20.25) and comparable with celecoxib (ulcer index = 2.93). Regarding anti-cancer activity, most of the target derivatives 16a-f and 19a-f showed good activities against A-549, MCF-7, HCT-116 and PC-3 cancer cell lines. Additionally, these derivatives examined against F180 fibroblasts to investigate their selectivity indexes. The sulphamoyl derivatives with internal oxime 19b and 19e were the most potent derivatives against all used cell lines especially PC-3 (IC50 = 1.48 and 0.33 µM respectively) with 11.75 and 39.4-fold respectively selectivity towards PC-3 than F180 fibroblasts. The mechanistic investigation of 19b and 19e revealed that both compounds arrested cell cycle at G2/M phase by 32.16 and 39.95 folds, up-regulated Bax expression by 6.83 and 14.52 folds and down-regulated the expression of the gene Bcl-2 by 0.57 and 0.36fold respectively. Also, 19b and 19e were good inhibitor for p38MAPK (0.65 for 19b and 0.58 for 19e) and VEGFR-2 (0.39 for 19b and 0.54 for 19e) in comparison with PC-3 control cell. All compounds 16a-f and 19a-f released NO in a slow rate (0.15-3.17%) and the four sulphamoyl derivatives 16b, 16e, 19b and 19e were the most NO releasers (3.06, 2.15, 3.17 and 2.54% respectively). Docking studies were carried out to explain the interaction of 16a-f and 19a-f with the target enzymes. Docking mode of final designed compounds with celecoxib (ID: 3LN1) represented that their triazole ring adopted as the core aryl in Y shaped structure. Regarding EGFR inhibition, docking was carried out with ID: 1M17. The internal oxime serious was more active as anticancer because of their ability to form extra HBs with receptor cleft.

Convection-Induced vs. Microwave Radiation-Induced in situ Drug Amorphization.

The aim of the study was to investigate the suitability of a convection oven to induce in situ amorphization. The study was conducted using microwave radiation-induced in situ amorphization as reference, as it has recently been shown to enable the preparation of a fully (100%) amorphous solid dispersion of celecoxib (CCX) in polyvinylpyrrolidone (PVP) after 10 min of continuous microwaving. For comparison, the experimental setup of the microwave-induced method was mimicked for the convection-induced method. Compacts containing crystalline CCX and PVP were prepared and either pre-conditioned at 75% relative humidity or kept dry to investigate the effect of sorbed water on the amorphization kinetics. Subsequently, the compacts were heated for 5, 10, 15, 20, or 30 min in the convection oven at 100 °C. The degree of amorphization of CCX in the compacts was subsequently quantified using transmission Raman spectroscopy. Using the convection oven, the maximum degree of amorphization achieved was 96.1% ± 2.1% (n = 3) for the conditioned compacts after 30 min of heating and 14.3% ± 1.4% (n = 3) for the dry compacts after 20 min of heating, respectively. Based on the results from the convection and the microwave oven, it was found that the sorbed water acts as a plasticizer in the conditioned compacts (i.e., increasing molecular mobility), which is advantageous for in situ amorphization in both methods. Since the underlying mechanism of heating between the convection oven and microwave oven differs, it was found that convection-induced in situ amorphization is inferior to microwave radiation-induced in situ amorphization in terms of amorphization kinetics with the present experimental setup.

The influence of drug and polymer particle size on the in situ amorphization using microwave irradiation.

In this study, the impact of drug and polymer particle size on the in situ amorphization using microwave irradiation at a frequency of 2.45 GHz were investigated. Using ball milling and sieve fractioning, the crystalline drug celecoxib (CCX) and the polymer polyvinylpyrrolidone (PVP) were divided into two particle size fractions, i.e. small (<71 µm) and large (>71 µm) particles. Subsequently, compacts containing a drug load of 30% (w/w) crystalline CCX in PVP were prepared and subjected to microwave radiation for an accumulated duration of 600 sec in intervals of 60 sec as well as continuously for 600 sec. It was found that the compacts containing small CCX particles displayed faster rates of amorphization and a higher degree of amorphization during microwave irradiation as compared to the compacts containing large CCX particles. For compacts with small CCX particles, interval exposure to microwave radiation resulted in a maximum degree of amorphization of 24%, whilst a fully amorphous solid dispersion (100%) was achieved after 600 sec of continuous exposure to microwave radiation. By monitoring the temperature in the core of the compacts during exposure to microwave radiation using a fiber optic temperature probe, it was found that the total exposure time above the glass transition temperature (Tg) was shorter for the interval exposure method compared to continuous exposure to microwave radiation. Therefore, it is proposed that the in situ formation of an amorphous solid dispersion is governed by the dissolution of drug into the polymer, which most likely is accelerated above the Tg of the compacts. Hence, prolonging the exposure time above the Tg, and increasing the surface area of the drug by particle size reduction will increase the dissolution rate and thus, rate and degree of amorphization of CCX during exposure to microwave radiation.