Fabrication of a modified bacterial cellulose with different alkyl chains and its prevention of abdominal adhesion.

Abdominal hernia mesh is a common product which is used for prevention of abdominal adhesion and repairing abdominal wall defect. Currently, designing and preparing a novel bio-mesh material with prevention of adhesion, promoting repair and good biocompatibility simultaneously remain a great bottleneck. In this study, a novel siloxane-modified bacterial cellulose (BC) was designed and fabricated by chemical vapor deposition silylation, then the effects of different alkyl chains length of siloxane on surface properties and cell behaviors were explored. The effect of preventing of abdominal adhesion and repairing abdominal wall defect in rats with the siloxane-modified BC was evaluated. As the grafted alkyl chains become longer, the surface of the siloxane-modified BC can be transformed from super hydrophilic to hydrophobic. In vivo results showed that BC-C16 had good long-term anti-adhesion effect, good tissue adaptability and histocompatibility, which is expected to be used as a new anti-adhesion hernia repair material in clinic.

Enhancing chondrogenic differentiation of mesenchymal stem cells through synergistic effects of cellulose nanocrystals and plastic compression in collagen-based hydrogel for cartilage formation.

Collagen-based (COL) hydrogels could be a promising treatment option for injuries to the articular cartilage (AC) becuase of their similarity to AC native extra extracellular matrix. However, the high hydration of COL hydrogels poses challenges for AC's mechanical properties. To address this, we developed a hydrogel platform that incorporating cellulose nanocrystals (CNCs) within COL and followed by plastic compression (PC) procedure to expel the excessive fluid out. This approach significantly improved the mechanical properties of the hydrogels and enhanced the chondrogenic differentiation of mesenchymal stem cells (MSCs). Radially confined PC resulted in higher collagen fibrillar densities together with reducing fibril-fibril distances. Compressed hydrogels containing CNCs exhibited the highest compressive modulus and toughness. MSCs encapsulated in these hydrogels were initially affected by PC, but their viability improved after 7 days. Furthermore, the morphology of the cells and their secretion of glycosaminoglycans (GAGs) were positively influenced by the compressed COL-CNC hydrogel. Our findings shed light on the combined effects of PC and CNCs in improving the physical and mechanical properties of COL and their role in promoting chondrogenesis.

A promising eco-sustainable wound dressing based on cellulose extracted from Spartium junceum L. and impregnated with Glycyrrhiza glabra L extract: Design, production and biological properties.

Glycyrrhiza glabra extract is widely known for its antioxidant and anti-inflammatory properties and can improve the wound healing process. The aim of this work was to shorten the time of the healing process by using an eco-sustainable wound dressing based on Spanish broom flexible cellulosic fabric by impregnation with G. glabra extract-loaded ethosomes. Chemical analysis of G. glabra extract was performed by LC-DAD-MS/MS and its encapsulation into ethosomes was obtained using the ethanol injection method. Lipid vesicles were characterized in terms of size, polydispersity index, entrapment efficiency, zeta potential, and stability. In vitro release studies, biocompatibility, and scratch test on 3T3 fibroblasts were performed. Moreover, the structure of Spanish broom dressing and its ability to absorb wound exudate was characterized by Synchrotron X-ray phase contrast microtomography (SR-PCmicroCT). Ethosomes showed a good entrapment efficiency, nanometric size, good stability over time and a slow release of polyphenols compared to the free extract, and were not cytotoxic. Lastly, the results revealed that Spanish broom wound dressing loaded with G. glabra ethosomes is able to accelerate wound closure by reducing wound healing time. To sum up, Spanish broom wound dressing could be a potential new green tool for biomedical applications.

Aloesin-loaded chitosan/cellulose-based scaffold promotes skin tissue regeneration.

Skin wound healing and regeneration is very challenging across the world as simple or acute wounds can be transformed into chronic wounds or ulcers due to foreign body invasion, or diseases like diabetes or cancer. The study was designed to develop a novel bioactive scaffold, by loading aloesin to chitosan-coated cellulose scaffold, to cure full-thickness skin wounds. The physiochemical characterization of the scaffold was carried out using scanning electron microscopy (SEM) facilitated by energy-dispersive spectrophotometer (EDS), atomic force microscopy (AFM), and Fourier transform infrared spectroscopy (FTIR). The results indicated the successful coating of chitosan and aloesin on cellulose without any physical damage. The drug release kinetics confirmed the sustained release of aloesin by showing a cumulative release of up to 88 % over 24 h. The biocompatibility of the aloesin-loaded chitosan/cellulose (AlCsCFp) scaffold was evaluated by the WST-8 assay that confirmed the significantly increased adherence and proliferation of fibroblasts on the AlCsCFp scaffold. The in vivo wound healing study showed that both 0.05 % and 0.025 % AlCsCFp scaffolds have significantly higher wound closure rates (i.e. 88.2 % and 95.6 % approximately) as compared to other groups. This showed that novel composite scaffold has a wound healing ability. Furthermore, histological and gene expression analysis demonstrated that the scaffold also induced cell migration, angiogenesis, re-epithelialization, collagen deposition, and tissue granulation formation. Thus, it is concluded that the aloesin-loaded chitosan/cellulose-based scaffold has great therapeutic potential for being used in wound healing applications in the clinical setting in the future.

Development of silanized bacterial cellulose aerogels for the incorporation of natural oils with healing properties: Copaiba (Copaifera officinalis), bourbon geranium (Pelargonium X ssp.) essential oils and buriti (Mauritia flexuosa) vegetable oil.

Bacterial cellulose (BC) represents a promising biomaterial, due to its unique and versatile properties. We report, herein, on purposely-designed structural modifications of BC that enhance its application as a wound dressing material. Chemical modification of the functional groups of BC was performed initially to introduce a hydrophobic/oleophilic character to its surface. Specifically, silanization was carried out in an aqueous medium using methyltrimethoxisilane (MTMS) as the silanizing agent, and aerogels were subsequently prepared by freeze-drying. The BC-MTMS aerogel obtained displayed a highly porous (99 %) and lightweight structure with an oil absorption capacity of up to 52 times its dry weight. The XRD pattern indicated that the characteristic crystallographic planes of the native BC were maintained after the silanization process. Thermal analysis showed that the thermal stability of the BC-MTMS aerogel increased, as compared to the pure BC aerogel (pBC). Moreover, the BC-MTMS aerogel was not cytotoxic to fibroblasts and keratinocytes. In the second step of the study, the incorporation of natural oils into the aerogel's matrix was found to endow antimicrobial and/or healing properties to BC-MTMS. Bourbon geranium (Pelargonium X ssp.) essential oil (GEO) was the only oil that exhibited antimicrobial activity against the tested microorganisms, whereas buriti (Mauritia flexuosa) vegetable oil (BVO) was non-cytotoxic to the cells. This study demonstrates that the characteristics of the BC structure can be modified, while preserving its intrinsic features, offering new possibilities for the development of BC-derived materials for specific applications in the biomedical field.

Copper oxide(I) nanoparticle-modified cellulose acetate membranes with enhanced antibacterial and antifouling properties.

Cellulose acetate membranes exhibit a potential to be applied in hemodialysis. However, their performance is limited by membrane fouling and a lack of antibacterial properties. In this research, copper oxide (I) nanoparticles were fabricated in situ into a cellulose acetate matrix in the presence of polyvinylpyrrolidone (pore-forming agent) and sulfobetaine (stabilising agent) to reduce the leakage of copper ions from nano-enhanced membranes. The influence of nanoparticles on the membrane structure and their antibacterial and antifouling properties were investigated. The results showed that incorporating Cu2O NPs imparted significant antibacterial properties against Staphylococcus aureus and fouling resistance under physiological conditions. The Cu2O NPs-modified membrane could pave the way for potential dialysis applications.

Development of cellulose/ZnO based bioplastics with enhanced gas barrier, UV-shielding effect and antibacterial activity.

Development of renewable and biodegradable plastics with good properties, such as the gas barrier, UV-shielding, solvent resistance, and antibacterial activity, remains a challenge. Herein, cellulose/ZnO based bioplastics were fabricated by dissolving cellulose carbamate in an aqueous solution of NaOH/Zn(OH)42-, followed by coagulation in aqueous Na2SO4 solution, and subsequent hot-pressing. The carbamate groups detached from cellulose, and ZnO which transformed from cosolvent to nanofiller was uniformly immobilized in the cellulose matrix during the dissolution/regeneration process. The appropriate addition of ZnO (below 10.67 wt%) not only improved the mechanical properties but also enhanced the water and oxygen barrier properties of the material. Additionally, our cellulose/ZnO based bioplastic demonstrated excellent UV-blocking capabilities, increased water contact angle, and enhanced antibacterial activity against S. aureus and E. coli, deriving from the incorporation of ZnO nanoparticles. Furthermore, the material exhibited resistance to organic solvents such as acetone, THF, and toluene. Indeed, the herein developed cellulose/ZnO based bioplastic presents a promising candidate to replace petrochemical plastics in various applications, such as plastic toys, anti-UV guardrails, window shades, and oil storage containers, offering a combination of favorable mechanical, gas barrier, UV-blocking, antibacterial, and solvent-resistant properties.

Biological activities of fig latex -loaded cellulose acetate/poly(ethylene oxide) nanofiber for potential therapeutics: Anticancer and antioxidant material.

Cancer is a fatal disease, and unfortunately, the anticancer drugs harm normal cells. Plant's extracts are the golden key to solving this issue. In this research, fig latex - from Ficus carica- was encapsulated using cellulose acetate (CA) and poly (ethylene oxide) (PEO) polymers via electrospinning method (Fig@CA/PEO). Fig@CA/PEO nanofiber scaffold was characterized by thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). The average fiber diameter was decreased with an increase in latex concentration from 715 nm to 583 nm. FT-IR spectroscopy indicated the presence of fig latex in Fig@CA/PEO nanofibers. Compared to 5-fluorouracil, Fig@CA/PEO nanofiber scaffold considered safe towards normal cells (WI-38). Moreover, the nanofiber scaffold was efficient against colon cancer cells (Caco) and liver cancer cells (HepG2) as it demonstrated IC50 values for cells by 23.97 µg/mL and 23.96 µg/mL, respectively. Besides, the nanofiber scaffold revealed mechanistic variations in apoptotic oncogenes; described by the upregulation of BCL2 and P21, combined by downregulation of p53 and TNF. Moreover, the nanofiber scaffold showed antioxidant activity counting 33.4, 36 and 41 % of DPPH scavenging as the fig latex concentration increased. The results demonstrate that the Fig@CA/PEO nanofiber scaffold is a promising substitute to traditional chemotherapy.

Mussel-inspired antimicrobial hydrogel with cellulose nanocrystals/tannic acid modified silver nanoparticles for enhanced calvarial bone regeneration.

Bacterial infection is a serious challenge in the treatment of open bone defects, and reliance on antibiotic therapy may contribute to the emergence of drug-resistant bacteria. To solve this problem, this study developed a mineralized hydrogel (PVA-Ag-PHA) with excellent antibacterial properties and osteogenic capabilities. Silver nanoparticles (CNC/TA@AgNPs) were greenly synthesized using natural macromolecular cellulose nanocrystals (CNC) and plant polyphenolic tannins (TA) as stabilizers and reducing agents respectively, and then introduced into polyvinyl alcohol (PVA) and polydopamine-modified hydroxyapatite (PDA@HAP) hydrogel. The experimental results indicate that the PVA-Ag-PHA hydrogel, benefiting from the excellent antibacterial properties of CNC/TA@AgNPs, can not only eliminate Staphylococcus aureus and Escherichia coli, but also maintain a sustained sterile environment. At the same time, the HAP modified by PDA is uniformly dispersed within the hydrogel, thus releasing and maintaining stable concentrations of Ca2+ and PO43- ions in the local environment. The porous structure of the hydrogel with excellent biocompatibility creates a suitable bioactive environment that facilitates cell adhesion and bone regeneration. The experimental results in the rat critical-sized calvarial defect model indicate that the PVA-Ag-PHA hydrogel can effectively accelerate the bone healing process. Thus, this mussel-inspired hydrogel with antibacterial properties provides a feasible solution for the repair of open bone defects, demonstrating the considerable potential for diverse applications in bone repair.

Virus adsorbent systems based on Amazon holocellulose and nanomaterials.

The environment preservation has been an important motivation to find alternative, functional, and biodegradable materials to replace polluting petrochemicals. The production of nonbiodegradable face masks increased the concentration of microplastics in the environment, highlighting the need for sustainable alternatives, such as the use of local by-products to create efficient and eco-friendly filtering materials. Furthermore, the use of smart materials can reduce the risk of contagion and virus transmission, especially in the face of possible mutations. The development of novel materials is necessary to ensure less risk of contagion and virus transmission, as well as to preserve the environment. Taking these factors into account, 16 systems were developed with different combinations of precursor materials (holocellulose, polyaniline [ES-PANI], graphene oxide [GO], silver nanoparticles [AgNPs], and activated carbon [AC]). Adsorption tests of the spike protein showed that the systems containing GO and AC were the most efficient in the adsorption process. Similarly, plate tests conducted using the VSV-IN strain cultured in HepG2 cells showed that the system containing all phases showed the greatest reduction in viral titer method. In agreement, the biocompatibility tests showed that the compounds extracted from the systems showed low cytotoxicity or no significant cytotoxic effect in human fibroblasts. As a result, the adsorption tests of the spike protein, viral titration, and biocompatibility tests showed that systems labeled as I and J were the most efficient. In this context, the present research has significantly contributed to the technological development of antiviral systems, with improved properties and increased adsorption efficiency, reducing the viral titer and contributing efficiently to public health. In this way, these alternative materials could be employed in sensors and devices for filtering and sanitization, thus assisting in mitigating the transmission of viruses and bacteria. RESEARCH HIGHLIGHTS: Sixteen virus adsorbent systems were developed with different combinations of precursor materials (holocellulose, polyaniline (ES-PANI), graphene oxide (GO), silver nanoparticles (AgNPs), and activated carbon (AC)). The system that included all of the nanocomposites holocellulose, PANI, GO, AgNPs, and AC showed the greatest reduction in viral titration. The biocompatibility tests revealed that all systems caused only mild or moderate cytotoxicity toward human fibroblasts.

Living Artificial Skin: Photosensitizer and Cell Sandwiched Bacterial Cellulose for Chronic Wound Healing.

Chronic wounds pose a significant global public health challenge due to their suboptimal treatment efficacy caused by bacterial infections and microcirculatory disturbances. Inspired by the biofunctionality of natural skin, an artificial skin (HV@BC@TBG) is bioengineered with bacterial cellulose (BC) sandwiched between photosensitizers (PS) and functionalized living cells. Glucose-modified PS (TBG) and vascular endothelial growth factor (VEGF)-functionalized living cells (HV) are successively modified on each side of BC through biological metabolism and bio-orthogonal reaction. As the outermost layer, the TBG layer can generate reactive oxygen species (ROS) upon light illumination to efficiently combat bacterial infections. The HV layer is the inner layer near the diabetic wound, which servs as a living factory to continuously secrete VEGF to accelerate wound repair by promoting fibroblast proliferation and angiogenesis. The sandwiched structural artificial skin HV@BC@TBG is nontoxic, biocompatible, and demonstrated its ability to significantly accelerate the healing process of infected diabetic wounds, rendering it a promising next-generation medical therapy for chronic wound management.

An antibacterial biologic patch based on bacterial cellulose for repair of infected hernias.

Infection-associated complications and repair failures and antibiotic resistance have emerged as a formidable challenge in hernia repair surgery. Consequently, the development of antibiotic-free antibacterial patches for hernia repair has become an exigent clinical necessity. Herein, a GBC/Gel/LL37 biological patch (biopatch) with exceptional antibacterial properties is fabricated by grafting 2-Methacryloyloxyethyl trimethylammonium chloride (METAC), a unique quaternary ammonium salt with vinyl, onto bacterial cellulose (GBC), followed by compounding with gelatin (Gel) and LL37. The GBC/Gel/LL37 biopatch exhibits stable swelling capacity, remarkable mechanical properties, flexibility, and favorable biocompatibility. The synergistic effect of METAC and LL37 confers upon the GBC/Gel/LL37 biopatch excellent antibacterial efficacy against Staphylococcus aureus and Escherichia coli, effectively eliminating invading bacteria without the aid of exogenous antibiotics in vivo while significantly reducing local acute inflammation caused by infection. Furthermore, the practical efficacy of the GBC/Gel/LL37 biopatch is evaluated in an infected ventral hernia model, revealing that the GBC/Gel/LL37 biopatch can prevent the formation of visceral adhesions, facilitate the repair of infected ventral hernia, and effectively mitigate chronic inflammation. The prepared antibacterial GBC/Gel/LL37 biopatch is very effective in dealing with the risk of infection in hernia repair surgery and offers potential clinical opportunities for other soft injuries, exhibiting considerable clinical application prospects.

Effects of bacterial cellulose/thyme essential oil emulsion coating on the shelf life of chilled chicken meat.

BACKGROUND: Bacterial cellulose (BC) is a fiber substance produced by microbial fermentation. It is widely used in the food preservation industry because of its extremely pure texture, high crystallinity and high biocompatibility. In the present study, bacterial cellulose/thyme essential oil (BC/TEO-E) with antibacterial and fresh-keeping functions was prepared by ultrasonic treatment of modified bacterial cellulose for encapsulation of thyme essential oil, which effectively inhibited the spoilage of chilled chicken. RESULTS: The purified BC, produced by Acetobacter xylinum ATCC 53524, was ultrasonically treated wih different times (0, 30, 60 and 90 min). Transmission electron microscopy, scanning electron microscopy, Fourier transformed infrared spectroscopy, X-ray diffraction, differential scanning calorimetry and zeta potential were used to characterize the structure of BC after ultrasound, showing that BC, treated for 30 min, had the optimal fiber structure, crystallinity (85.8%), thermal stability (347.77 °C) and solution stability (-26.63 ± 1.96 mV). BC/TEO-E was prepared by a homogenizer for the preservation of chilled chicken. Optical microscopy indicated that the BC/TEO-E prepared by 0.5% BC had optimal dispersion and stability, and even no delamination was observed in the emulsion. Compared with other groups (control, 0.5% BC and Tween-E), the total number of colonies and coliforms in chilled chicken treated with 0.5% BC/TEO-E was the lowest during the whole storage period (12 days), indicating that it can effectively inhibit bacterial growth. In addition, total volatile base nitrogen (TVB-N), thiobarbituric acid reactive substances, pH and drip loss results showed that 0.5% BC/TEO-E could effectively inhibit the spoilage of chilled chicken compared to the other treatment groups. CONCLUSION: All of the results acquired in the present study indicate that BC/TEO-E has a potential application in chilled chicken preservation. © 2024 Society of Chemical Industry.

Cellulose nanofibers embedded chitosan/tannin hydrogel with high antibacterial activity and hemostatic ability for drug-resistant bacterial infected wound healing.

Millions of patients annually suffer life-threatening illnesses caused by bacterial infections of skin wounds. However, the treatment of wounds infected with bacteria is a thorny issue in clinical medicine, especially with drug-resistant bacteria infections. Therefore, there is an increasing interest in developing wound dressings that can efficiently fight against drug-resistant bacterial infections and promote wound healing. In this work, an anti-drug-resistant bacterial chitosan/cellulose nanofiber/tannic acid (CS/CNF/TA) hydrogel with excellent wound management ability was developed by electrospinning and fiber breakage-recombination. The hydrogel exhibited an outstanding antibacterial property exceeding 99.9 %, even for drug-resistant bacteria. This hydrogel could adhere to the tissue surface due to its abundant catechol groups, which avoided the shedding of hydrogel during the movement. Besides, it exhibited extraordinary hemostatic ability during the bleeding phase of the wound and then regulated the wound microenvironment by absorbing water and moisturizing. Moreover, the CS/CNF/TA also promoted the regrowth of vessels and follicles, accelerating the healing of infected wound tissue, with a healing rate exceeding 95 % within a 14-day timeframe. Therefore, the CS/CNF/TA hydrogel opens a new approach for the healing of drug-resistant bacterial infected wounds.

Direct ink writing of biocompatible chitosan/non-isocyanate polyurethane/cellulose nanofiber hydrogels for wound-healing applications.

The demand for new biocompatible and 3D printable materials for biomedical applications is on the rise. Ideally, such materials should exhibit either biodegradability or recyclability, possess antibacterial properties, and demonstrate remarkable biocompatibility with no cytotoxic effects. In this research, we synthesized biocompatible and 3D printable hydrogels tailored for biomedical applications, such as wound healing films, by combining antibacterial double-quaternized chitosan (DQC) with cystamine-based non-isocyanate polyurethane (NIPU-Cys) - a material renowned for enhancing both the flexibility and mechanical properties of the hydrogels. To improve the rheological behavior, swelling attributes, and printability, cellulose nanofibrils were introduced into the matrix. We investigated the impact of DQC on degradability, swelling capacity, rheological behavior, printability, and cell biocompatibility. The slightly cytotoxic nature associated with quaternary chitosan was evaluated, and the optimal concentration of DQC in the hydrogel was determined to ensure biocompatibility. The resulting hydrogels were found to be suitable materials for 3D printing via a direct ink writing technique (DIW), producing porous, biocompatible hydrogels endowed with valuable attributes suitable for various wound-healing applications.

Bacterial cellulose as a promising material for pulmonary valve prostheses: In vivo study in a sheep model.

OBJECTIVES: Currently, no consensus exists regarding the most durable prosthesis for pulmonary valve replacement. Bacterial cellulose is a resistant, nonbiodegradable, nonpyrogenic bioimplant with low hemolysis and clotting properties. We hypothesized that bacterial cellulose heart valve prostheses could be an attractive alternative for pulmonary valve replacement. METHODS: We conducted a large animal model experiment in three adult sheep. The animals underwent open-heart surgery and cardiopulmonary bypass for bacterial cellulose conduit implantation in the pulmonary position. The sheep were followed for seven months, and clinical and laboratory parameters were analyzed. Echocardiographic evaluations were performed at 3 and 7 months. After seven months, the sheep were sacrificed and an autopsy was performed. The explanted conduits were radiologically and histopathologically analyzed. RESULTS: All sheep survived the operation, showing good recovery and normal health status; no adverse events were noted during the 7-month postoperative follow-up. Interval laboratory findings were normal with no signs of hemolysis or infection. Echocardiographic analysis after 7 months revealed a normal mean pressure gradient with excellent cusp motion and coaptation; a trace of regurgitation was found in two sheep. X-ray analysis of the explanted conduits revealed no structural defects in the leaflets with minimal calcification. Histological examination showed slight thickening of the conduit by pannus formation. No material failure, no calcification inside the material, and only minor calcification extrinsic to the matrix were observed. CONCLUSIONS: This pilot study provides evidence that bacterial cellulose may be suitable for pulmonary valve prostheses and surgical pulmonary artery plasty. Further studies on the high pressure side of the left heart are needed.

A Cellulose/Chitosan Dual Cross-Linked Multifunctional and Resilient Hydrogel for Emergent Open Wound Management.

Adhesive hydrogel holds huge potential in biomedical applications, such as hemostasis and emergent wound management during outpatient treatment or surgery. However, most adhesive hydrogels underperform to offer robust adhesions on the wet tissue, increasing the risk of hemorrhage and reducing the fault tolerance of surgery. To address this issue, this work develops a polysaccharide-based bioadhesive hydrogel tape (ACAN) consisting of dual cross-linking of allyl cellulose (AC) and carboxymethyl chitosan (CMCS). The hygroscopicity of AC and CMCS networks enables ACAN to remove interfacial water from the tissue surface and initializes a physical cross-link instantly. Subsequently, covalent cross-links are developed with amine moieties to sustain long-term and robust adhesion. The dual cross-linked ACAN also has good cytocompatibility with controllable mechanical properties matching to the tissue, where the addition of CMCS provides remarkable antibacterial properties and hemostatic capability. Moreover, compared with commercially available 3 M film, ACAN provides an ultrafast wound healing on tissue. The ACAN hybrid hydrogels have advantages such as biocompatibility and antibacterial, hemostatic, and wound healing properties, shedding new light on first-aid tape design and advancing the cellulose-based materials technology for high-performance biomedical applications.

Branched fructo-oligosaccharides from Polygonatum Cyrtonema Hua as crosslinking agents for cellulose: A novel injectable and on-demand dissolution hydrogel for diabetic wound.

Oligosaccharide-containing macromolecular bio adhesives are emerging as highly promising eco-friendly materials to enhance the cytocompatibility of viscous hydrogels for wound healing applications. In our prior research, we extensively elucidated the properties of branch-structure fructo-oligosaccharides derived from Polygonatum Cyrtonema Hua (referred to as PCOS). However, the characteristics of hydrogels based on fructo-oligosaccharides remain to be fully explored. In present work, we developed an injectable, PCOS/carboxymethyl cellulose (CMC) hydrogel which is a dual ion-physical cross-linked hydrogel that can be considered as a potential diabetic wound dressing. The tests showed that the optimal ratios for hydrogel preparation were 2 % CBM 940 (Carbomer 940), 5 % CMC and 10 % PCOS. The resultant hydrogel was formulated into composite hydrogels that were then used for the treatment of full-thickness excisional wounds in a db/db diabetic mouse model. Wound closure and histological evaluation confirmed its beneficial effect on wound healing. Further morphological analysis through scanning electron microscopy images revealed a porous hydrogel structure, while Fourier-transform infrared spectroscopy provided structural insights on the crosslinking reaction. Physicochemical properties of the hybrid hydrogels determined by rheological properties, thermogravimetric, water loss rate, et al., indicated that the double crosslinking PCOS/CMC hybrid hydrogel showed enhanced dynamic mechanical properties and water retention capacity compared to the CMC cellulose matrix hydrogels. Thus, this novel PCOS-hybrid hydrogel exhibited good dissolvability and injectable properties, which was proved to facilitate for the diabetic wound healing both in vitro and in vivo test and holds a potential clinical application in the wound healing.

High Soluble Fiber Promotes Colorectal Tumorigenesis Through Modulating Gut Microbiota and Metabolites in Mice.

BACKGROUND & AIMS: Dietary fibers are mainly fermented by the gut microbiota, but their roles in colorectal cancer (CRC) are largely unclear. Here, we investigated the associations of different fibers with colorectal tumorigenesis in mice. METHODS: Apcmin/+ mice and C57BL/6 mice with azoxymethane (AOM) injection were used as CRC mouse models. Mice were fed with mixed high-fiber diet (20% soluble fiber and 20% insoluble fiber), high-inulin diet, high-guar gum diet, high-cellulose diet, or diets with different inulin dose. Germ-free mice were used for validation. Fecal microbiota and metabolites were profiled by shotgun metagenomic sequencing and liquid chromatography-mass spectrometry, respectively. RESULTS: Mixed high-fiber diet promoted colorectal tumorigenesis with increased tumor number and tumor load in AOM-treated and Apcmin/+ mice. Antibiotics use abolished the pro-tumorigenic effect of mixed high-fiber diet, while transplanting stools from mice fed with mixed high-fiber diet accelerated tumor growth in AOM-treated germ-free mice. We therefore characterized the contribution of soluble and insoluble fiber in CRC separately. Our results revealed that soluble fiber inulin or guar gum, but not insoluble fiber cellulose, promoted colorectal tumorigenesis in AOM-treated and Apcmin/+ mice. Soluble fiber induced gut dysbiosis with Bacteroides uniformis enrichment and Bifidobacterium pseudolongum depletion, accompanied by increased fecal butyrate and serum bile acids and decreased inosine. We also identified a positive correlation between inulin dosage and colorectal tumorigenesis. Moreover, transplanting stools from mice fed with high-inulin diet increased colonic cell proliferation and oncogene expressions in germ-free mice. CONCLUSION: High-dose soluble but not insoluble fiber potentiates colorectal tumorigenesis in a dose-dependent manner by dysregulating gut microbiota and metabolites in mice.

Development of antifogging double-layer film using cellulose nanofibers and carboxymethyl chitosan for white Hypsizygus marmoreus preservation.

Films with simultaneously excellent mechanical and anti-fog properties are of great importance for food packaging. A novel strategy is described here to prepare long-lasting anti-fog film with antibacterial and antioxidant capabilities via a simple, green approach. The CMC (carboxymethyl chitosan) gel was integrated with CNF/TA (cellulose nanofibers/tannic acid) composite solution based on layer-by-layer assembly to form a membrane with a bilayer structure. The anti-fog performance of the bilayer film could be adjusted by regulating the CNF/TA layer thickness. On the whole, the developed anti-fog film had high mechanical strength and excellent UV shielding properties, as well as good antibacterial and antioxidant properties, and could be non-fogging for a long time under water vapor (40 °C). The effect of double layer anti-fog film (3%CmFT-3) on the fresh-keeping effect of white Hypsizygus marmoreus was compared at room temperature (28 °C) with commercially available anti-fog PVC film. The results showed that the bilayer anti-fog film could effectively prevent the generation of fog, delay the Browning, inhibit mildew, improve the overall acceptability, and effectively extend the shelf life of white Hypsizygus marmoreus. This biomass-based anti-fog film offers great potential for the development of multifunctional green food packaging.