In Planta Discovery and Chemical Synthesis of Bracelet Cystine Knot Peptides from Rinorea bengalensis.

Cyclotides are plant-derived peptides that have attracted interest as biocides and scaffolds for the development of stable peptide therapeutics. Cyclotides are characterized by their cyclic backbone and cystine knot framework, which engenders them with remarkably high stability. This study reports the cystine knot-related peptidome of Rinorea bengalensis, a small rainforest tree in the Violaceae family that is distributed from Australia westward to India. Surprisingly, many more acyclic knotted peptides (acyclotides) were discovered than cyclic counterparts (cyclotides), with 32 acyclotides and 1 cyclotide sequenced using combined transcriptome and proteomic analyses. Nine acyclotides were isolated and screened against a panel of mammalian cell lines, showing they had the cytotoxic properties normally associated with cyclotide-like peptides. NMR analysis of the acyclotide ribes 21 and 22 and the cyclotide ribe 33 confirmed that these peptides contained the cystine knot structural motif. The bracelet-subfamily cyclotide ribe 33 was amenable to chemical synthesis in reasonable yield, an achievement that has long eluded previous attempts to synthetically produce bracelet cyclotides. Accordingly, ribe 33 represents an exciting new bracelet cyclotide scaffold that can be subject to chemical modification for future molecular engineering applications.

Circular Permutation of the Native Enzyme-Mediated Cyclization Position in Cyclotides.

Cyclotides are a class of cyclic disulfide-rich peptides found in plants that have been adopted as a molecular scaffold for pharmaceutical applications due to their inherent stability and ability to penetrate cell membranes. For research purposes, they are usually produced and cyclized synthetically, but there are concerns around the cost and environmental impact of large-scale chemical synthesis. One strategy to improve this is to combine a recombinant production system with native enzyme-mediated cyclization. Asparaginyl endopeptidases (AEPs) are enzymes that can act as peptide ligases in certain plants to facilitate cyclotide maturation. One of these ligases, OaAEP1b, originates from the cyclotide-producing plant, Oldenlandia affinis, and can be produced recombinantly for use in vitro as an alternative to chemical cyclization of recombinant substrates. However, not all engineered cyclotides are compatible with AEP-mediated cyclization because new pharmaceutical epitopes often replace the most flexible region of the peptide, where the native cyclization site is located. Here we redesign a popular cyclotide grafting scaffold, MCoTI-II, to incorporate an AEP cyclization site located away from the usual grafting region. We demonstrate the incorporation of a bioactive peptide sequence in the most flexible region of MCoTI-II while maintaining AEP compatibility, where the two were previously mutually exclusive. We anticipate that our AEP-compatible scaffold, based on the most popular cyclotide for pharmaceutical applications, will be useful in designing bioactive cyclotides that are compatible with AEP-mediated cyclization and will therefore open up the possibility of larger scale enzyme-mediated production of recombinant or synthetic cyclotides alike.

Using backbone-cyclized Cys-rich polypeptides as molecular scaffolds to target protein-protein interactions.

The use of disulfide-rich backbone-cyclized polypeptides, as molecular scaffolds to design a new generation of bioimaging tools and drugs that are potent and specific, and thus might have fewer side effects than traditional small-molecule drugs, is gaining increasing interest among the scientific and in the pharmaceutical industries. Highly constrained macrocyclic polypeptides are exceptionally more stable to chemical, thermal and biological degradation and show better biological activity when compared with their linear counterparts. Many of these relatively new scaffolds have been also found to be highly tolerant to sequence variability, aside from the conserved residues forming the disulfide bonds, able to cross cellular membranes and modulate intracellular protein-protein interactions both in vitro and in vivo These properties make them ideal tools for many biotechnological applications. The present study provides an overview of the new developments on the use of several disulfide-rich backbone-cyclized polypeptides, including cyclotides, θ-defensins and sunflower trypsin inhibitor peptides, in the development of novel bioimaging reagents and therapeutic leads.

Synthesis of Single-Ring Nanoparticles Mimicking Natural Cyclotides by a Stepwise Folding-Activation-Collapse Process.

Cyclotides are small cyclic polypeptides found in a variety of organisms, ranging from bacteria to plants. Their ring structure endows those polypeptides with specific properties, such as improved stability against enzymatic degradation. Optimal cyclotide activity is often observed only in the presence of intra-ring disulfide bonds. Synthesis of soft nano-objects mimicking the conformation of natural cyclotides remains challenging. Here, a new class of natural cyclotide mimics synthesized by a stepwise folding-activation-collapse process at high dilution starting from simple synthetic precursor polymers is established. The initial folding step is carried out by a photoactivated hetero Diels-Alder (HDA) ring-closing reaction, which is accompanied by chain compaction of the individual precursor polymer chains as determined by size exclusion chromatography (SEC). The subsequent activation step comprises a simple azidation procedure, whereas the final collapse step is driven by CuAAC in the presence of an external cross-linker, providing additional compaction to the final single-ring nanoparticles (SRNPs). The unique structure and compaction degree of the SRNPs is established via a detailed comparison with conventional single-chain nanoparticles (SCNPs) prepared exclusively by chain collapse from the exact same precursor polymer (without the prefolding step). The stepwise folding-activation-collapse approach opens new avenues for the preparation of artificial cyclotide mimetics.

Enzymatic On-Resin Peptide Cleavage and in Situ Cyclization One-Pot Strategy for the Synthesis of Cyclopeptide and Cyclotide.

A one-pot strategy combining sortase A mediated on-resin peptide cleavage and in situ cyclization was developed for the synthesis of cyclic peptides. This strategy was applied to synthesize head-to-tail cyclic antibacterial bovine lactoferricin peptide LFcinB20-35 in a yield of 67%. The one-pot strategy was compatible with an oxidative folding reaction, and complex cyclotides containing one or two disulfide bonds, such as sunflower trypsin inhibitors-1 and α-conotoxin MII, were successfully synthesized in one pot in a yield of 77% and 61%, respectively.

In vivo Evaluation of an Engineered Cyclotide as Specific CXCR4 Imaging Reagent.

The CXCR4 chemokine receptor plays a key regulatory role in many biological functions, including embryonic development and controlling leukocyte functions during inflammation and immunity. CXCR4 has been also associated with multiple types of cancers where its overexpression/activation promotes metastasis, angiogenesis, and tumor growth and/or survival. Furthermore, CXCR4 is involved in HIV replication, as it is a co-receptor for viral entry into host cells. Altogether, these features make CXCR4 a very attractive target for the development of imaging and therapeutic agents. Here, the in vivo evaluation of the MCoTI-based cyclotide, MCo-CVX-5c, for the development of imaging agents that target CXCR4 is reported. Cyclotide MCo-CVX-5c is a potent CXCR4 antagonist with a remarkable in vivo resistance to biological degradation in serum. A [64 Cu]-DOTA-labeled version of this cyclotide demonstrated high and significant uptake in U87-stb-CXCR4 tumors compared to the control U87 tumors. Furthermore, protracted imaging studies demonstrated radiotracer retention in the U87-stb-CXCR4 tumor at 24 h post injection. Uptake in U87-stb-CXCR4 tumors could be blocked by unlabeled MCo-CVX-5c, showing high in vivo specificity. These results demonstrate the in vivo specificity and retention of a bioactive molecularly targeted cyclotide and highlight the potential of bioactive cyclotides for the development of new imaging agents that target CXCR4.

Novel approaches to the design of bioavailable melanotropins.

INTRODUCTION: The melanocortin system is a primordial and critical system for survival, involved in a wide variety of physiological functions. It includes melanocortin receptors (MCRs) and melanotropin ligands (MCLs). MCRs are important drug targets that can regulate several key physiological processes. Extensive efforts have been made to develop peptide and peptidomimetics targeting melanocortin receptors including MC1R, MC3R, MC4R and MC5R. Most research is focused on developing potent and selective melanotropins. However, developing bioavailable melanotropins remains challenging. Areas covered: Herein, the authors summarize promising strategies for developing bioavailable MCLs by using cyclized N-methylated melanotropins, and using cyclotide and tetrapeptide as templates. They discuss their unique advantages in oral availability and targeting MCRs in the central nervous system or in peripheral tissues. Finally, they discuss the observed differences in thepharmacology of MCRs between in vitro and in vivo tests. Expert opinion: N-methylated cyclized melanotropins have great potential to become bio- available drugs targeting MCRs in the brain, while MCR-grafted cyclotides tend to target MCRs in peripheral tissue. A better understanding of the biased signaling process is a new challenge and opportunity for the future discovery of bioavailable MCLs.

Cyclotides as drug design scaffolds.

Cyclotides are ultra-stable peptides derived from plants. They are around 30 amino acids in size and are characterized by their head-to-tail cyclic backbone and cystine knot. Their exceptional stability and tolerance to sequence substitutions has led to their use as frameworks in drug design. This article describes recent developments in this field, particularly developments over the last two years relating to the grafting of bioactive peptide sequences into the cyclic cystine knot framework of cyclotides to stabilize the sequences. Grafted cyclotides have now been developed that interact with protein or enzyme targets, both extracellular and intracellular, as well as with cell surface receptors and membranes.

Structural and functional characterization of chimeric cyclotides from the Möbius and trypsin inhibitor subfamilies.

Cyclotides are plant-derived host defense peptides displaying exceptional stability due to their cyclic cystine knot comprising three intertwined disulfide bonds and a cyclic backbone. Their six conserved cysteine residues are separated by backbone loops with diverse sequences. Prototypical cyclotides from the Möbius (kalata B1) and trypsin inhibitor (MCoTI-II) subfamilies lack sequence homology with one another, but both are able to penetrate cells, apparently via different mechanisms. To delineate the influence of the sequences of the loops on the structure and cell internalization of these two cyclotide subfamilies, a series of Möbius/trypsin inhibitor loop-chimeras of kalata B1 and MCoTI-II were synthesized, and structurally and functionally characterized. NMR analysis showed that the structural fold of the majority of chimeric peptides was minimally affected by the loop substitutions. Substituting loops 3, 5, or 6 of MCoTI-II into the corresponding loops of kalata B1 attenuated its hemolytic and cytotoxic activities, and greatly reduced its cell-penetrating properties. On the other hand, replacing loops of MCoTI-II with the corresponding loops of kalata B1 did not introduce cytotoxicity into the chimeras. Loops 2, 3, and 4 of MCoTI-II were found to contribute little to cell-penetrating properties. Overall, this study provides valuable insights into the structural basis for the hemolytic, cytotoxic, and cell-penetrating properties of kalata B1 and MCoTI-II, which could be useful for future engineering of cyclotides to carry bioactive epitopes to intracellular targets.

Design of a MCoTI-Based Cyclotide with Angiotensin (1-7)-Like Activity.

We report for the first time the design and synthesis of a novel cyclotide able to activate the unique receptor of angiotensin (1-7) (AT1-7), the MAS1 receptor. This was accomplished by grafting an AT1-7 peptide analog onto loop 6 of cyclotide MCoTI-I using isopeptide bonds to preserve the α-amino and C-terminal carboxylate groups of AT1-7, which are required for activity. The resulting cyclotide construct was able to adopt a cyclotide-like conformation and showed similar activity to that of AT1-7. This cyclotide also showed high stability in human serum thereby providing a promising lead compound for the design of a novel type of peptide-based in the treatment of cancer and myocardial infarction.

Transforming conotoxins into cyclotides: Backbone cyclization of P-superfamily conotoxins.

Peptide backbone cyclization is a widely used approach to improve the activity and stability of small peptides but until recently it had not been applied to peptides with multiple disulfide bonds. Conotoxins are disulfide-rich conopeptides derived from the venoms of cone snails that have applications in drug design and development. However, because of their peptidic nature, they can suffer from poor bioavailability and poor stability in vivo. In this study two P-superfamily conotoxins, gm9a and bru9a, were backbone cyclized by joining the N- and C-termini with short peptide linkers using intramolecular native chemical ligation chemistry. The cyclized derivatives had conformations similar to the native peptides showing that backbone cyclization can be applied to three disulfide-bonded peptides with cystine knot motifs. Cyclic gm9a was more potent at high voltage-activated (HVA) calcium channels than its acyclic counterpart, highlighting the value of this approach in developing active and stable conotoxins containing cyclic cystine knot motifs.

Rapid parallel synthesis of bioactive folded cyclotides by using a tea-bag approach.

We report here the first rapid parallel production of bioactive folded cyclotides by using Fmoc-based solid-phase peptide synthesis in combination with a "tea-bag" approach. Using this approach, we efficiently synthesized 15 analogues of the CXCR4 antagonist cyclotide MCo-CVX-5c. Cyclotides were synthesized in a single-pot, cyclization/folding reaction in the presence of reduced glutathione. Natively folded cyclotides were quickly purified from the cyclization/folding crude mixture by activated thiol Sepharose-based chromatography. The different folded cyclotide analogues were then tested for their ability to inhibit the CXCR4 receptor in a cell-based assay. The results indicated that this approach can be used for the efficient chemical synthesis of libraries of cyclotides with improved biological properties that can be easily interfaced with solution or cell-based assays for rapid screening.

Fmoc-based synthesis of disulfide-rich cyclic peptides.

Disulfide-rich cyclic peptides have exciting potential as leads or frameworks in drug discovery; however, their use is faced with some synthetic challenges, mainly associated with construction of the circular backbone and formation of the correct disulfides. Here we describe a simple and efficient Fmoc solid-phase peptide synthesis (SPPS)-based method for synthesizing disulfide-rich cyclic peptides. This approach involves SPPS on 2-chlorotrityl resin, cyclization of the partially protected peptide in solution, cleavage of the side-chain protecting groups, and oxidization of cysteines to yield the desired product. We illustrate this method with the synthesis of peptides from three different classes of cyclic cystine knot motif-containing cyclotides: Möbius (M), trypsin inhibitor (T), and bracelet (B). We show that the method is broadly applicable to peptide engineering, illustrated by the synthesis of two mutants and three grafted analogues of kalata B1. The method reduces the use of highly caustic and toxic reagents and is better suited for high-throughput synthesis than previously reported methods for producing disulfide-rich cyclic peptides, thus offering great potential to facilitate pharmaceutical optimization of these scaffolds.

A thioethylalkylamido (TEA) thioester surrogate in the synthesis of a cyclic peptide via a tandem acyl shift.

The cyclic cystine-knot peptide, kalata B1, was synthesized by employing a novel Fmoc-compatible thioethylalkylamido (TEA) thioester surrogate via an N-S acyl shift followed by a thiol-thioester exchange reaction. TEA thioester surrogate is cost-effective, conveniently prepared in one-step with starting materials, readily available from commercial sources, and highly efficient in preparing peptide thioesters.

Cyclotides, a novel ultrastable polypeptide scaffold for drug discovery.

Cyclotides are a unique and growing family of backbone cyclized peptides that also contain a cystine knot motif built from six conserved cysteine residues. This unique circular backbone topology and knotted arrangement of three disulfide bonds makes them exceptionally stable to thermal, chemical, and enzymatic degradation compared to other peptides of similar size. Aside from the conserved residues forming the cystine knot, cyclotides have been shown to have high variability in their sequences. Consisting of over 160 known members, cyclotides have many biological activities, ranging from anti-HIV, antimicrobial, hemolytic, and uterotonic capabilities; additionally, some cyclotides have been shown to have cell penetrating properties. Originally discovered and isolated from plants, cyclotides can also be produced synthetically and recombinantly. The high sequence variability, stability, and cell penetrating properties of cyclotides make them potential scaffolds to be used to graft known active peptides or engineer peptide-based drug design. The present review reports recent findings in the biological diversity and therapeutic potential of natural and engineered cyclotides.

A Synthetic mirror image of kalata B1 reveals that cyclotide activity is independent of a protein receptor.

Featuring a circular, knotted structure and diverse bioactivities, cyclotides are a fascinating family of peptides that have inspired applications in drug design. Most likely evolved to protect plants against pests and herbivores, cyclotides also exhibit anti-cancer, anti-HIV, and hemolytic activities. In all of these activities, cell membranes appear to play an important role. However, the question of whether the activity of cyclotides depends on the recognition of chiral receptors or is primarily modulated by the lipid-bilayer environment has remained unknown. To determine the importance of lipid membranes on the activity of the prototypic cyclotide, kalata B1, we synthesized its all-D enantiomer and assessed its bioactivities. After the all-D enantiomer had been confirmed by (1)H NMR to be the structural mirror image of the native kalata B1, it was tested for anti-HIV activity, cytotoxicity, and hemolytic properties. The all-D peptide is active in these assays, albeit with less efficiency; this reveals that kalata B1 does not require chiral recognition to be active. The lower activity than the native peptide correlates with a lower affinity for phospholipid bilayers in model membranes. These results exclude a chiral receptor mechanism and support the idea that interaction with phospholipid membranes plays a role in the activity of kalata B1. In addition, studies with mixtures of L and D enantiomers of kalata B1 suggested that biological activity depends on peptide oligomerization at the membrane surface, which determines affinity for membranes by modulating the association-dissociation equilibrium.

Identification and characterization of a new family of cell-penetrating peptides: cyclic cell-penetrating peptides.

Cell-penetrating peptides can translocate across the plasma membrane of living cells and thus are potentially useful agents in drug delivery applications. Disulfide-rich cyclic peptides also have promise in drug design because of their exceptional stability, but to date only one cyclic peptide has been reported to penetrate cells, the Momordica cochinchinensis trypsin inhibitor II (MCoTI-II). MCoTI-II belongs to the cyclotide family of plant-derived cyclic peptides that are characterized by a cyclic cystine knot motif. Previous studies in fixed cells showed that MCoTI-II could penetrate cells but kalata B1, a prototypic cyclotide from a separate subfamily of cyclotides, was bound to the plasma membrane and did not translocate into cells. Here, we show by live cell imaging that both MCoTI-II and kalata B1 can enter cells. Kalata B1 has the same cyclic cystine knot structural motif as MCoTI-II but differs significantly in sequence, and the mechanism by which these two peptides enter cells also differs. MCoTI-II appears to enter via macropinocytosis, presumably mediated by interaction of positively charged residues with phosphoinositides in the cell membrane, whereas kalata B1 interacts directly with the membrane by targeting phosphatidylethanolamine phospholipids, probably leading to membrane bending and vesicle formation. We also show that another plant-derived cyclic peptide, SFTI-1, can penetrate cells. SFTI-1 includes just 14 amino acids and, with the exception of its cyclic backbone, is structurally very different from the cyclotides, which are twice the size. Intriguingly, SFTI-1 does not interact with any of the phospholipids tested, and its mechanism of penetration appears to be distinct from MCoTI-II and kalata B1. The ability of diverse disulfide-rich cyclic peptides to penetrate cells enhances their potential in drug design, and we propose a new classification for them, i.e. cyclic cell-penetrating peptides.

Cytotoxic potency of small macrocyclic knot proteins: structure-activity and mechanistic studies of native and chemically modified cyclotides.

The cyclotides are a family of circular and knotted proteins of natural origin with extreme enzymatic and thermal stability. They have a wide range of biological activities that make them promising tools for pharmaceutical and crop-protection applications. The cyclotides are divided into two subfamilies depending on the presence (Möbius) or absence (bracelet) of a cis-Pro peptide bond. In the current work we report a series of experiments to give further insight into the structure-activity relationship of cyclotides in general, and the differences between subfamilies and the role of their hydrophobic surface in particular. Selective chemical modifications of Glu, Arg, Lys and Trp residues was tested for cytotoxic activity: derivatives in which the Trp residue was modified showed low effect, demonstrating the existence of a connection between hydrophobicity and activity. However, over the full set of cyclotides examined, there was no strong correlation between the cytotoxic activity and their hydrophobicity. Instead, it seems more like that the distribution of charged and hydrophobic residues determines the ultimate degree of potency. Furthermore, we found that while the Glu residue is very important in maintaining the activity of the bracelet cyclotide cycloviolacin O2, it is much less important in the Möbius cyclotides. Despite these differences between cyclotide subfamilies, a systematic test of mixtures of cyclotides revealed that they act in an additive way.

Cyclotides: macrocyclic peptides with applications in drug design and agriculture.

Cyclotides are disulfide-rich peptides from plants that are exceptionally stable as a result of their unique cyclic cystine knot structural motif. Their natural role is thought to be as plant defence agents, most notably against insect pests, but they also have potential applications in drug design and agriculture. This article identifies gaps in current knowledge on cyclotides and suggests future directions for research into this fascinating family of ultra-stable mini-proteins.

Cyclotides as templates in drug design.

Cyclotides are remarkably stable proteins from plants that have a range of pharmaceutical and agricultural applications based on both their various bioactivities and their potential for use as stable protein-engineering templates. This article discusses literature on pharmaceutically relevant activities of cyclotides, including anti-HIV, antimicrobial and cytotoxic activities, and evaluates their potential therapeutic applications. Their applications as templates for the design of antiangiogenic agents for the treatment of cancer and as anti-infective agents are also described. Toxic effects of cyclotides, whose native function is as insecticidal agents, can be removed by simple mutagenesis, thus rationalizing the apparent conundrum of proposing insecticidal agents as leads for human therapeutics.