Anatomical Diversity in Femur bones: Understanding the Morphological Variability for Surgical and Prosthetic Applications / Diversidad Anatómica en Huesos Fémur: Comprensión de la Variabilidad Morfológica para Aplicaciones Quirúrgicas y Protésicas

SUMMARY: The femur, the body's longest bone, plays a critical role in orthopaedics and radiology. Understanding its anatomy, particularly the neck-shaft angle (NSA), is vital for diagnosing bone issues and designing hip implants. While some Asian populations' femur measurements have been studied, there is a research gap concerning Sri Lankans. This study aimed to fill this gap by examining the proximal femur's anatomy in the Sri Lankan population. We analysed 45 adult human femurs (26 right, 19 left) of unknown sex, ethically sourced from the University of Sri Jayewardenepura. Femurs with fractures or pathologies were excluded. Precise measurements were recorded using digital vernier callipers, with millimetre accuracy. Parameters included mean femoral length, vertical and transverse femoral head diameters, neck axis and neck length. Each measurement was taken three times to minimize subjectivity. Right femurs had a mean length of 42.8 mm (SD±2.64), while left femurs measured 43.53 mm (SD±3.27). Mean NSA was 125.78º (SD±4.45) for left femurs and 127.59º (SD±2.06) for right. Mean femoral head diameters were 4.09mm (SD±0.30) (right) and 4.12mm (SD±0.31) (left). Mean anterior neck lengths of the right and left were 2.61 (SD±0.54) and 2.71(SD±0.50) respectively. Comparing our findings with other Asian populations highlighted significant variations in femur measurements. These discrepancies emphasize the need for population-specific data for orthopaedic interventions and raise questions about the suitability of imported prosthetics. Differences in femur length, neck length, and NSA between sides suggest potential challenges in using implants designed for one side on the other. This study underscores the necessity of population-specific data in orthopaedics, as femur measurements differ even among Asian populations. Further research and statistical analysis are essential for tailoring orthopaedic solutions to individual populations. The findings also suggest a potential need for locally manufactured prosthetics to better suit the Sri Lankan population.

El fémur, el hueso más largo del cuerpo, desempeña un papel fundamental en ortopedia y radiología. Comprender su anatomía, en particular el ángulo cuello-diáfisis (NSA), es vital para diagnosticar problemas óseos y diseñar implantes de cadera. Si bien se han estudiado las medidas del fémur de algunas poblaciones asiáticas, existe un vacío en la investigación sobre los habitantes de Sri Lanka. Este estudio tuvo como objetivo examinar la anatomía del fémur proximal en la población de Sri Lanka. Analizamos 45 fémures humanos adultos (26 derechos, 19 izquierdos) de sexo desconocido, obtenidos éticamente de la Universidad de Sri Jayewardenepura. Se excluyeron fémures con fracturas o patologías. Se registraron mediciones precisas utilizando calibradores vernier digitales, con precisión milimétrica. Los parámetros incluyeron la longitud femoral media, los diámetros vertical y transversal de la cabeza femoral, el eje del cuello y la longitud del cuello. Cada medición se tomó tres veces para minimizar la subjetividad. Los fémures derechos tuvieron una longitud media de 42,8 mm (DE ± 2,64), mientras que los fémures izquierdos midieron 43,53 mm (DE ± 3,27). La NSA media fue de 125,78º (DE±4,45) para el fémur izquierdo y de 127,59º (DE±2,06) para el derecho. Los diámetros medios de la cabeza femoral fueron 4,09 mm (DE ± 0,30) (derecha) y 4,12 mm (DE ± 0,31) (izquierda). Las longitudes medias del cuello anterior de la derecha y la izquierda fueron 2,61 (DE ± 0,54) y 2,71 (DE ± 0,50) respectivamente. La comparación de nuestros hallazgos con otras poblaciones asiáticas destacó variaciones significativas en las medidas del fémur. Estas discrepancias enfatizan la necesidad de datos específicos de la población para las intervenciones ortopédicas y plantean dudas sobre la idoneidad de las prótesis importadas. Las diferencias en la longitud del fémur, la longitud del cuello y la NSA entre lados sugieren posibles desafíos al utilizar implantes diseñados para un lado en el otro. Este estudio subraya la necesidad de datos específicos de la población en ortopedia, ya que las mediciones del fémur difieren incluso entre las poblaciones asiáticas. Es esencial realizar más investigaciones y análisis estadísticos para adaptar las soluciones ortopédicas a poblaciones individuales. Los hallazgos también sugieren una posible necesidad de prótesis fabricadas localmente para adaptarse mejor a la población de Sri Lanka.

Anatomical features of the proximal femur in the Turkish population / Características anatómicas del fémur proximal en la población turca

SUMMARY: Different populations have different genetic traits, and this causes various anatomical features to emerge. Orthopedic implants used in Turkey are generally of Western origin, and these implants are designed based on the anatomical features of Western populations. This study aimed to evaluate the compatibility of existing implants for the Turkish population by revealing the anatomical features of the proximal femurs of individuals from the Turkish population while also constituting a helpful source of data on newly developed implants. A total of 1920 proximal femurs of 960 patients were evaluated via images obtained by Computer Tomography. Twenty patients (10 females and 10 males) for each age within the age range of 18-65 years were included. Femoral head diameter, femoral neck width, femoral neck length, medullary canal width, and collodiaphyseal angle were measured. The right and left femoral head diameter was 46.46±3.84 mm, 46.50 ±3.85 mm respectively. The right and left femoral neck width was 30.63±3.4 mm, 30.85±3.29 mm respectively. The neck length was 94.62±8.33 mm for the right proximal femur, it was 94.75±8.19 mm for the left. The width of the medullary canal was 15.46±2.25 mm for the right proximal femur and 15.53±2.20 mm for the left. The right and left hips, the collodiaphyseal angles were 133.06±2.39° and 133.13±2.36°. Anatomical features of the proximal femur vary according to age, sex, and race. This study may be used as an important resource for the evaluation of patients' compatibility with existing implants and for the design of new implants.

Diferentes poblaciones tienen diferentes rasgos genéticos, y esto hace que surjan varias características anatómicas. Los implantes ortopédicos utilizados en Turquía son generalmente de origen occidental y estos implantes están diseñados en función de las características anatómicas de estas poblaciones. Este estudio tuvo como objetivo evaluar la compatibilidad de los implantes existentes para la población turca al revelar las características anatómicas de las epífisis proximales de fémures de individuos de la población turca y, al mismo tiempo, constituir una fuente útil de datos sobre implantes recientemente desarrollados. Se evaluaron un total de 1920 fémures proximales de 960 pacientes mediante imágenes obtenidas por tomografía computarizada. Se incluyeron veinte pacientes (10 mujeres y 10 hombres) para cada edad dentro del rango de edad de 18 a 65 años. Se midió el diámetro de la cabeza femoral, el ancho del cuello femoral, la longitud del cuello femoral, el ancho del canal medular y el ángulo colodiafisario. El diámetro de la cabeza femoral derecha e izquierda fue de 46,46 ± 3,84 mm, 46,50 ± 3,85 mm, respectivamente. La anchura del cuello femoral derecho e izquierdo fue de 30,63±3,4 mm, 30,85±3,29 mm, respectivamente. La longitud del cuello fue de 94,62±8,33 mm para el fémur derecho, fue de 94,75±8,19 mm, para el izquierdo. El ancho del canal medular fue de 15,46±2,25 mm para el fémur derecho y de 15,53±2,20 mm para el izquierdo. Las caderas derecha e izquierda, los ángulos colodiafisarios fueron 133,06±2,39° y 133,13±2,36°. Las características anatómicas de la epífisis proximal del fémur varían según la edad, el sexo y la raza. Este estudio puede utilizarse como un recurso importante para la evaluación de la compatibilidad de los pacientes con los implantes existentes y para el diseño de nuevos implantes.

Management of proximal femur fractures in the elderly: current concepts and treatment options.

As one of the leading causes of elderly patients' hospitalisation, proximal femur fractures (PFFs) will present an increasing socioeconomic problem in the near future. This is a result of the demographic change that is expressed by the increasing proportion of elderly people in society. Peri-operative management must be handled attentively to avoid complications and decrease mortality rates. To deal with the exceptional needs of the elderly, the development of orthogeriatric centres to support orthogeriatric co-management is mandatory. Adequate pain medication, balanced fluid management, delirium prevention and the operative treatment choice based on comorbidities, individual demands and biological rather than chronological age, all deserve particular attention to improve patients' outcomes. The operative management of intertrochanteric and subtrochanteric fractures favours intramedullary nailing. For femoral neck fractures, the Garden classification is used to differentiate between non-displaced and displaced fractures. Osteosynthesis is suitable for biologically young patients with non-dislocated fractures, whereas total hip arthroplasty and hemiarthroplasty are the main options for biologically old patients and displaced fractures. In bedridden patients, osteosynthesis might be an option to establish transferability from bed to chair and the restroom. Postoperatively, the patients benefit from early mobilisation and early geriatric care. During the COVID-19 pandemic, prolonged time until surgery and thus an increased rate of complications took a toll on frail patients with PFFs. This review aims to offer surgical guidelines for the treatment of PFFs in the elderly with a focus on pitfalls and challenges particularly relevant to frail patients.

The Oval-like Cross-section of Femoral Neck Isthmus in Three-dimensional Morphological Analysis.

OBJECTIVES: To investigate the cross-section shape of the femoral neck isthmus (FNI) in three-dimensional reconstruction model of the femoral neck. METHODS: From December 2009 to December 2012, computed tomography (CT) data of bilateral hip joint from 200 consecutive patients (137 males and 63 females, 69.41 ± 9.21 years old, ranged from 50-85 years old) who underwent surgical treatments for proximal femoral fracture were retrospectively reviewed. The 3D model of the proximal femur was reconstructed, and the "inertia axis" method, which was applied to measure the long and short axes of the cross-section of the FNI, was established. The cross-sectional area and perimeter were calculated by a formula using the length of the long and short axes and then compared with the actual measured values by the software. Correlation between the descriptive parameters of the FNI cross-section (area, perimeter, and eccentricity) and patients' demographics (age, height, and weight) was analyzed. Stepwise linear regression analysis was used to determine the main relevant factors. RESULTS: The ICC results showed excellent data reproducibility ranged from 0.989 to 0.996. There was no significant difference in the cross-sectional area of the FNI between the actual measured values and the predicted values using the formula (732.83 ± 126.74 mm2 vs 731.62 ± 128.15 mm2 , P = 0.322). The perimeter using the two methods showed narrow while significant difference (97.86 ± 8.60 mm vs 92.84 ± 8.65 mm, P < 0.001), the actual measured values were about 5 mm greater than the predicted values. The parameters (area, perimeter, and eccentricity) were significantly larger in male than female (P < 0.001). A positive correlation between the cross-sectional area, perimeter, height, and weight was observed. The stepwise linear regression analysis showed that the regression equation of the FNI area was as follows: Y = -1083.75 + 1033.86 × HEIGHT + 1.92 × WEIGHT, R2 = 0.489. CONCLUSION: The cross-section shape of the FNI appears to be oval-like in the 3D model, which is separated according to the inertia axis, and the findings proposed an anatomical basis for the further study of the spatial configuration of cannulated screws in the treatment of femoral neck fractures.

The Effect of Resection Size in the Treatment of Cam-Type Femoroacetabular Impingement in the Typical Patient With Hip Arthroscopy: A Biomechanical Analysis.

BACKGROUND: Arthroscopic osteochondroplasty may improve range of motion and relieve pain in patients with symptomatic hip impingement. Femoral neck fracture is a risk of this procedure because of the weakening of the proximal femur. To our knowledge, there are no biomechanical studies in young human cadaveric bone evaluating the effect of osteochondroplasty on femoral neck strength. PURPOSE/HYPOTHESIS: The purpose was to evaluate loads to fracture in young human cadavers after resection depths of 25% and 40% at the head-neck junction. We hypothesized that both depths will maintain ultimate loads to failure above previously published loads, as well as above physiologic weightbearing loads. STUDY DESIGN: Descriptive laboratory study. METHODS: Cadaveric proximal femoral specimens (6 matched pairs, under the age of 47 years) were divided into 2 groups: 25% or 40% of the diameter at the head-neck junction was resected. The length of the resection was 2 cm and the width of the resection was determined by the length of the anterolateral quadrant at the head-neck junction in all cases. A compressive load was applied directly to the femoral head. Peak load, stiffness, and energy to fracture were compared between groups. RESULTS: The average peak load to fracture after 25% resection (7347 N) was significantly higher than after the 40% resection (5892 N) (P = .010). The average energy to fracture was also significantly higher in the 25% resection group (30.2 J vs 19.2 J; P = .007). The average stiffness was higher in the 25% group, although not statistically significant (P = .737). CONCLUSION: Resection depths of 25% and 40% at the anterolateral quadrant of the femoral head-neck junction may be safe at previously described functional loads such as standing and walking in the age range more typically seen in patients undergoing hip arthroscopy. Loads to fracture were significantly higher than previously reported using older cadaveric specimens. CLINICAL RELEVANCE: Currently, most surgeons limit weightbearing after femoral osteochondroplasty in part because of risk of femoral neck fracture. Given the higher observed loads to fracture, young patients could possibly bear weight sooner after surgery, although postoperative protocols should be individualized based on patient age, weight, bone density, amount of bone resected, concomitant procedures, and potential compliance with activity restrictions.

Three-dimensional morphological analysis of the femoral neck torsion angle-an anatomical study.

BACKGROUND: The femoral neck torsion angle (FNTA) is an important but often neglected parameter in assessments of the anatomical morphology of the femoral neck, which is often confused with the femoral neck anteversion angle (FNAA) in the current literature. Currently, the measurement methods reported in the literature all adopt the naked eye or two-dimensional (2D) visualization method, and the measurement parameters and details are not clearly defined. The objection of this research was to provide a reliable 3D method for determining the femoral neck axis, to improve the measurement method of the FNTA, and to analyze the anatomical and clinical significance of the results. METHODS: Computed tomography (CT) data of 200 patients who received a lower extremity CT angiography examination were selected, and the bilateral femurs were reconstructed with three dimensional CT (3D CT). First, the 3D axis of the femoral neck was built. Second, the long axis of the cross section the femoral neck isthmus (FNI) and femoral neck basilar part (FNB) were confirmed by the "inertia axes" method, and the plane consisting of the long axis of the cross-section and the center of the femoral head was defined as the long axial plane. Third, the coronal plane of the proximal femur was determined through the long axis of the proximal femur and the femoral coronal. Finally, the FNTAs (the angles between the long axial planes and the coronal plane of the proximal femur) of FNI and FNB were measured. The size of FNTA was compared between the sexes and sides and different locations, the correlation between the parameters and age, height, and weight were evaluated. RESULTS: The difference in FNTA was statistically significant between the isthmus and the basilar part (isthmus 30.58 ± 8.90° vs. basilar part 23.79 ± 3.98°; p < 0.01). Significant difference in the FNTA was observed between the sexes (males 31.99 ± 9.25° vs. females 27.49 ± 7.19°; p < 0.01). The increase in FNTA from the basilar part to the isthmus was 6.79 ± 8.06°, and the male (7.87 ± 8.57°) was greater than the female (4.44 ± 6.23°, p < 0.01). However, no significant difference in the values was observed between sides. Height exerted the greatest effect on the FNTA according to the correlation analysis (r = 0.255, p< 0.001). CONCLUSIONS: This study found a reliable 3D method for the determination of the femoral neck axis improved the measurement method of the FTNTA and made it more accurate and repeatable. The results provided a methodological basis and theoretical support for the research and development of internal fixation device for femoral neck fracture and the spatial configuration of implants in treatment. And the optimal opening point of the femoral medullary cavity was recommended to locate at the posterior position of the top of the femoral neck cross-section during hip replacement.

Total cross-sectional area of the femoral neck nutrient foramina measured to assess arterial vascular beds in the femoral head.

BACKGROUND: A detailed understanding of the blood supply to the femoral head is required to plan the surgery in the femoral neck and head area. However, information about the blood vessel networks in the femoral head is inadequate. METHODS: The surface of the femoral neck of 100 dry cadaveric adult femur specimens was scanned using a 3D scanner. The scanning distance was 200 mm, precision 0.01 mm, and measuring point 0.04 mm. The images were acquired at a resolution of 1,310,000 pixels. Digital imaging data were recorded from the femoral neck surface. The diameters of the nutrient foramina of the superior, inferior and anterior retinacular arteries, and the ligamentum teres arteries were determined and divided into five groups. RESULTS: The mean cumulative cross-sectional area of the nutrient foramina was as follows: canals of the superior, inferior, anterior, and ligamentum retinacular arteries were 15.59 mm2, 3.63 mm2, 4.32 mm2, and 1.58 mm2, respectively. Next, we analyzed the canals of the superior, inferior, anterior and ligamentum retinacular arteries, respectively, via 3D scanner. We found that the canals of the superior retinacular arteries appear to supply more blood to the femoral head than the canals of the other three types of arteries. CONCLUSIONS: Our results demonstrated that surgeries of the femoral neck and femoral head will be improved with prior 3D scanning and lead to better outcomes in surgeries involving the hip area.

Application of three-dimensional reconstruction to improve the preoperative measurement accuracy and applicability of femoral neck torsion angle.

Conventional methods have limitations in measuring femoral neck torsion angle (FNTA) of patients with femoral deformities. A new method of three-dimensional (3D) reconstruction technology based on computer tomography (CT) was proposed to enhance measurement accuracy and applicability in this study.Bilateral FNTA of 50 developmental dysplasia of the hip (DDH) patients (DDH group) and 81 volunteers (normal group) were measured by Mimics software based on CT data with the marker lines determined by centerline and curvature. Each FNTA was measured by observer A and observer B for twice separately. 50 DDH patients were classified into 3 groups (group I, II, III) according to Hartofilakidis classification. The statistical analysis of the differences was made among the measurements of the FNTA.The FNTA values were 27.56°â€Š±â€Š12.48° in DDH group and 21.22°â€Š±â€Š8.14° in normal group with significant difference (t = 4.516, P < .001). The FNTA values were 24.53°â€Š±â€Š2.40° in group I, 29.78°â€Š±â€Š1.83° in group II and 39.08°â€Š±â€Š3.13° in group III, with significant difference (F = 7.568, P = .001).The accuracy, reliability and applicable scope of FNTA measurement can be improved by 3D reconstruction in clinical practice. The applicable scope of this method included normal people and patients with femoral deformities. The FNTA of DDH patients is significantly larger than normal volunteers with a positive correlation between the severity of classification. This study will also provide references for preoperative design of Chinese population.

Relationships between the femoral neck-preserving ratio and radiologic and clinical outcomes in patients undergoing total-hip arthroplasty with a collum femoris-preserving stem.

The femoral neck-preserving ratio is crucial in arthroplasty with a collum femoris-preserving (CFP) stem. The aim of our study was to analyze the relationships between the neck-preserving ratio and the short-term radiologic and clinical outcomes of patients who underwent total-hip arthroplasty (THA) with a CFP stem.The data of 325 hips from January 2015 to December 2016 were retrospectively reviewed. The demographic and radiologic data before and after surgery were obtained from patients. The neck-preserving ratio was defined as the ratio of the preserved femoral neck length to the preoperative femoral neck length. Correlations between the neck-preserving ratio and the radiologic and clinical outcomes of patients were analyzed.The mean neck-preserving ratio was 66.38 ±â€Š6.91% in the current study. We divided patients into 3 groups according to the neck-preserving ratio: group A (neck-preserving ratio ≤60.00%), group B (60.00% < neck-preserving ratio < 70.00%), group C (neck-preserving ratio ≥70.00%). Radiologic features, including the neck-shaft angle ratio (0.96 ±â€Š0.05), canal fill ratio (0.64 ±â€Š0.07), anterior-posterior offset ratio (1.04 ±â€Š0.10), and lateral offset ratio (2.55 ±â€Š1.56) (ratios of the postoperative values to the preoperative values), and the prevalence of complications was significantly different among the groups (χ = 21.173, P < .001). In the correlation analysis, we found a moderate negative correlation between the neck-preserving ratio and neck-shaft angle ratio (r = -0.308, P < .001) and a slight positive correlation of the neck-preserving ratio with the anterior-posterior offset ratio (r = 0.415, P < .001) and the lateral offset ratio (r = 0.164, P = .003). In the linear regression analyses, the neck-preserving ratio was significantly linearly correlated with the neck-shaft angle ratio (B = -0.232, 95% confidence interval [CI] = -0.311 to -0.154, P < .001), anterior-posterior offset ratio (B = 0.589, 95% CI = 0.447-0.730, P < .001), and lateral offset ratio (B = 3.693, 95% CI = 1.256-6.131, P = .003). However, there was no significant linear correlation between the neck-preserving ratio and the canal fill ratio (B = 0.073, 95% CI = -0.033 to 0.180, P = .174). Logistic regression analyses also showed that a sufficient neck-preserving ratio was a protective factor for periprosthetic femoral fractures (odds ratio [OR] = 0.924, 95% CI = 0.859-0.994, P = .035), dislocations (OR = 0.892, 95% CI = 0.796-0.999, P = .048), and thigh pain (OR = 0.886, 95% CI = 0.818-0.960, P = .003).For CFP stems, an insufficient neck-preserving ratio is significantly correlated with poor radiologic and clinical outcomes. Therefore, surgeons should be cognizant to preserve a sufficient femoral neck length during surgery to improve the outcomes for patients undergoing THA with CFP stems.

Measurement of the femoral neck angle in medium and large dog breeds using computed tomography.

The aim of this study was to get precise normal values of the femoral neck angle (FNA) in support of developing an optimally functioning total hip prosthesis for medium and large dog breeds. Accordingly, two- and three-dimensional computed tomographic images of the anatomical structures of the proximal femora of 58, hip-dysplasia-free, mature dogs of medium and large breeds were studied. Based on the length of their femora the dogs were allocated to Group I (from 145 to 195 mm) and Group II (from 196 to 240 mm). The FNA was measured on each femur using multi-slice spiral computed tomography (CT). The two- and three-dimensional image data were processed as multi-planar and threedimensional reconstructions using Advantage Workstation software. The CT measurements revealed that Group I had an average femoral neck angle of 147.59° (min. 144.05°, max. 153.35°), while in Group II the average FNA was 147.46° (min. 141°, max. 154.35°). There was no significant correlation between the length of the femur and the FNA in either group. The optimal FNA for a total hip prosthesis is 147.5° for medium and large dog breeds.

Surgically Relevant Morphological Parameters of Proximal Human Femur: A Statistical Analysis Based on 3D Reconstruction of CT Data.

OBJECTIVES: Recently, more accurate description of the femoral geometry has become of interest to engineers and orthopedic surgeons. However, an appropriate database is lacking. Therefore, the aim of this study is to present morphological parameters and their correlations, which are relevant for medical issues such as impingement after total hip replacement, as well as for implant design and the etiology of hip fractures. METHODS: We investigated 12 well-known morphological parameters of the femur in 169 healthy human subjects through evaluation of 3D-reconstructed CT scans. Pearson's coefficients of correlations were calculated using a statistical t-test method for each pair of parameters. RESULTS: The mean, maximum, minimum, median, and standard deviation values are reported for all parameters. Histograms showing the distribution of each morphological parameter are also presented. It is shown that absolute and horizontal offsets, total femur length, and NCVD parameters are normally distributed, but NCDF and NCDS are not. Furthermore, an inter-correlation matrix was reported to reveal statistical correlations between these parameters. The strongest positive correlation existed between absolute offset (OSA) and horizontal offset (OSH), while the least positive correlation was found between NCDF and total femur length (TFL), and also between NCDS and NCDF. Anteversion angle (ATA) and OSA showed the least negative correlation. However, the strongest negative correlation was found between neck-shaft angle (NSA) and greater trochanter height (GTH), as well as between OSA and NCVD. CONCLUSIONS: Comprehending patients' native bone morphology, including the variations and correlations, is essential for orthopedic surgeons to undertake preoperative planning and surgery as well as to appropriately design medical devices. Thus, more population-based detailed databases are necessary. We investigated an extensive set of proximal femoral morphology parameters using a statistically standardized method to expand the existing knowledge. The results of our study can be used for diverse medical and biomechanical purposes.

Evaluation of Native Femoral Neck Version and Final Stem Version Variability in Patients With Osteoarthritis Undergoing Robotically Implanted Total Hip Arthroplasty.

BACKGROUND: Combined anteversion in total hip arthroplasty influences both dislocation risk and range of motion. One of its components, stem version (SV), could be dictated by many factors, from native femoral anatomy to stem geometry and surgeon's choice. In the present multicenter study, robotic technology was used to assess the influence of native femoral version on final SV and combined anteversion using a straight, uncemented stem. METHODS: Three hundred sixty-two patients undergoing total hip arthroplasty were enrolled from 3 different orthopedic centers from 2012 and 2016. All patients underwent computed tomography planning with measurement of femoral neck version (FNV) and intraoperative measurement of stem version (SV), acetabular component version (AV), and combined version (CV) with robotic instrumentation. RESULTS: Mean FNV was 5.0° ± 9.6°, and SV was 6.4° ± 9.7°. The average difference between FNV and SV was 1.6° ± 9.8°. A moderate correlation was found between FNV and SV (R = 0.48, P < .001). SV was between 5° and 20° in 174 patients (48%). Mean CV was 28.2° ± 7.9°. A strong correlation was found between SV and CV (R = 0.89, P < .001). A significant difference in SV was found between the 3 centers (P < .001). CV was <25° in 109 patients (30.1%). Relative risk of CV < 25° was 8.6 times greater with SV < 5° (P < .001). CONCLUSION: With the use of an uncemented, single-wedge, straight stem, SV is highly variable. Despite being moderately correlated with native FNV, SV can be partially influenced by the surgeon. A low SV could be hardly corrected, bringing high risk of low CV.

The Hip Morphology Changes with Ageing in Asian Population.

OBJECTIVES: This study aims to determine the changing in hip anatomy parameters with age and reveals the reason for the extorsion of lower extremity in the aged. DESIGN: Retrospective study. PARTICIPANTS: One hundred and forty patients who had received imaging check of the femur and acetabulum between October 2013 and October 2016 were included in this study. MAIN OUTCOME MEASURES: The femoral neck torsion angle (FNTA), neck-shaft angle (NSA), and acetabular anteversion angle (AVA) were measured by an experienced orthopedic surgeon. All the patients' demographic and physical characteristics including age, sex, body laterality, height, and weight were recorded. The Student t-test, two-way ANOVA, Pearson correlation, and multiple linear regression were used for the statistical analysis. RESULTS: The mean age for male and female was 45.01±15.38 and 49.30±17.63 years, respectively. Outcomes revealed that the NSA on the right side of the body, 133.46±4.46° in male and 134.36±4.71° in female, was statistically higher than the left side. Female FNTA had significantly higher values than male (P<0.01). Two-way ANOVA reveals that FNTA and AVA were correlated with age (P<0.05) but not weight, height, or BMI. NSA was correlated with age, weight, and BMI (P<0.05) but not height. Multiple linear regression analysis showed that only age made an independent contribution to NSA. CONCLUSIONS: The NSA and FNTA of Asian population may have an obvious decrease whereas AVA increases with ageing, which reveals the reason for the extorsion of lower extremity with elderly. During hip-related surgery in elderly patients, more attention should be paid to these lower extremity anatomic changes.

The anteroposterior axis of the tibia is approximately perpendicular to the anterior pelvic plane in the standing position in healthy Japanese subjects.

BACKGROUND: We previously reported that the clinical epicondylar axis (CEA) was approximately parallel to the transverse axis of the anterior pelvic plane (APP) in the standing position in normal subjects. The purpose of this study was to investigate the rotational alignment between APP in the standing position and the anteroposterior (AP) axis of the tibia relative to pelvic coordination in normal subjects. METHODS: This study included 68 healthy Japanese, 24 males and 44 females, without lumbago and knee pain. Femoral neck anteversion (FNA), condylar twist angle, and knee rotation angle were measured in femoral coordination. The angle between the femoral neck axis and CEA transverse axis of APP was also measured, and the angle between the AP axis of the tibia and the transverse axis of APP was calculated. The mean value of knee rotation angle was 0.23° and 2.06° in male and female subjects, respectively. RESULTS: There was a moderate positive correlation between FNA and the femoral axis angle relative to the transverse axis of APP. The knee rotation angle relative to APP was 0.33° and 1.56° in male and female subjects, respectively, and the tibia AP axis was approximately perpendicular to the transverse axis of APP in the standing position. Regarding validation, we obtained high interclass correlation coefficients for both intraobserver and interobserver reliability. CONCLUSION: We found that the knee rotation angle was almost 0° and that the tibia AP axis was approximately perpendicular to the CEA. The tibia AP axis was also approximately perpendicular to the transverse axis of the APP in standing position.

3D Computer graphical anatomy study of the femur: a basis for a new nail design.

BACKGROUND: Current intramedullary nails with a radius of curvature (ROC) of 1500-2000 mm sometimes cause distal anterior cortical encroachment. Furthermore, clinical data indicate that the proximal nail end is too long for some Asian patients. The objective of our study was to develop a comprehensive 3D measurement protocol that measures both the anatomy of the canal and the proximal region. The protocol was used to obtain measurements from Caucasian and Asian (Japanese and Thai) specimens. MATERIALS AND METHODS: A total of 90 3D bone models representative of hip fracture patients were reconstructed from CT data. RapidForm 2006 was used to generate the reference geometries required for determining radius and angulation of shaft antecurvature as well as measurements of the proximal anatomy. Multiple linear regression analyses were used to determine the relative contribution of height, age, ethnicity, gender, and body side on the total variance. RESULTS: The mean ROC in the natural 3D antecurvature plane was 885 mm overall, 974 mm in Caucasians and 787 mm in Asians. Height, age, ethnicity, gender, and body side significantly predicted ROC (R = 0.53, p = 0.000). The mean values of anteversion measurements for Asians (Japanese: 22.1°; Thai: 22.7°) were significantly larger than those of the Caucasians (14.5°; p = 0.001). There was virtually no difference (p = 0.186) between the measurements pertaining to the length of the proximal nail end between Caucasian and Asian samples. There was no significant difference between the mean neck-to-shaft angles (Caucasian: 126°; Japanese: 128.2°; Thai: 125.7°; p = 0.198 for Asians vs Caucasians). CONCLUSIONS: The developed comprehensive anatomical 3D measurement protocol could serve as standardised approach for anthropometric studies in the future. Our data suggest that the ROC of current nail designs should be reduced from between 1500 and 2000 to 1000 mm to achieve an improved fit for the investigated population.

Prediction of the drilling path to surgically pin the femoral neck from the spatial location of pelvic and femoral anatomical landmarks: A cadaver validation study.

Several clinical applications rely on accurate guiding information when drilling along the femoral neck (e.g., pin insertion in case of neck fracture). Currently, applications rely on real-time X-ray imaging, which results in irradiation issues for the surgeon conducting the operation. The goal of this paper was to develop an X-ray-free method that would allow for a pathway to be drilled between the lateral aspect of the femoral diaphysis (the so-called piercing point), the femoral neck and the head centres. The method is based on on-the-fly computational predictions relying on a biomechanical database that includes morphological data related to the femoral neck and head and various palpable anatomical landmarks located on the pelvis and the femoral bone. From the spatial location of the anatomical landmarks, scalable multiple regressions allow for the prediction of the most optimal drilling pathway. The method has been entirely validated using in vitro experiments that reproduce surgical conditions. Further, a surgical ancillary prototype that integrates the method of guiding the pin drilling has been developed and used during in vitro and in situ validation using nine hip joints. Pin insertion was controlled after drilling using medical imaging and show successful result for each of the nine trials. The mean accuracy of the estimated hip joint centre and neck orientation was 6.0 ± 2.8mm and 7.1 ± 3.8°, respectively.

Number and distribution of nutrient foramina within the femoral neck and their relationship to the retinacula of Weitbrecht: an anatomical study.

Precise knowledge of the vascular supply of the femoral head is critical when contemplating surgery around the femoral head and neck junction. To determine the blood supply to the femoral neck, 2417 nutrient foramina from 76 cadaveric specimens were analyzed based on size, number, and distribution. Within the subcapital, transcervical, and basicervical regions of the femoral neck, the largest numbers of nutrient foramina were found on the superior (lateral) surface, followed by the anterior and posterior surfaces, and then the inferior (medial) surface (all p < 0.001). The diameters of most of the nutrient foramina were less than 1 mm. For the posterior and superior surfaces, the nutrient foramina in the basicervical region were significantly larger than those within the transcervical or subcapital regions (nutrient foramina >2 mm posteriorly: 23.6, 12.7, and 9.0 % in the basicervical, transcervical, and subcapital regions, respectively; superiorly: 23.7 vs. 15.4 vs. 16.8 %, respectively). In conclusion, neither the anterior nor the inferior surfaces in the basicervical, transcervical, and subcapital regions showed any significant differences in nutrient foraminal size. The areas containing densely distributed nutrient foramina were consistent with the regions covered by the retinacula of Weitbrecht.

Ghrelin plasma levels, gastric ghrelin cell density and bone mineral density in women with rheumatoid arthritis

Generalized bone loss can be considered an extra-articular manifestation of rheumatoid arthritis (RA) that may lead to the occurrence of fractures, resulting in decreased quality of life and increased healthcare costs. The peptide ghrelin has demonstrated to positively affect osteoblasts in vitro and has anti-inflammatory actions, but the studies that correlate ghrelin plasma levels and RA have contradictory results. We aimed to evaluate the correlation between total ghrelin plasma levels, density of ghrelin-immunoreactive cells in the gastric mucosa, and bone mineral density (BMD) in twenty adult women with established RA with 6 months or more of symptoms (mean age of 52.70±11.40 years). Patients with RA presented higher ghrelin-immunoreactive cells density in gastric mucosa (P=0.008) compared with healthy females. There was a positive relationship between femoral neck BMD and gastric ghrelin cell density (P=0.007). However, these same patients presented a negative correlation between plasma ghrelin levels and total femoral BMD (P=0.03). The present results indicate that ghrelin may be involved in bone metabolism of patients with RA. However, the higher density of ghrelin-producing cells in the gastric mucosa of these patients does not seem to induce a corresponding elevation in the plasma levels of this peptide.

Evaluation of morphological changes in pharynx with dynamic CT and MRI in snoring patients / Anomalías morfológicas de la faringe en roncadores

Background: Identifying the craniofacial abnormalities that cause snoring and the narrowest area of the upper airway creating obstructions can help to determine the proper method of treatment. Aim: To identify the factors that can cause snoring and the areas of the airway that are the most likely to collapse with upper airway imaging. Material and Methods: Axial pharynx examinations with CT (computerized tomography) and magnetic resonance imaging (MRI) were performed to 38 patients complaining of snoring and 12 patients who did not complain of snoring. The narrowest areas of nasopharynx, hypophraynx, oropharynx, bilateral para-pharyngeal fat pad and para-pharyngeal muscle thickness were measured. Results: In snoring patients, the narrowest part of the upper airway was the retro-palatal region in the oropharynx, as measured with both imaging methods. When patients with and without snoring were compared, the former that a higher body mass index and neck diameter and a narrower oropharynx area. In dynamic examinations, we determined that as para-pharyngeal muscle thickness increased, medial-lateral airway diameter and the oropharynx area decreased. Conclusions: The narrowest section of the airway is the retro-palatal region of the oropharynx, measured both with CT and MRI.

Antecedentes: La identificación de las anomalías craneofaciales que causan el ronquido es importante para decidir la terapia adecuada. Objetivo: Identificar los factores que causan el ronquido y las zonas de la vía aérea superior que son más susceptibles de colapsar, usando imágenes. Material y Métodos: Se efectuaron exámenes axiales de la faringe con tomografía computada (TC) y resonancia magnética (RM) en 38 pacientes que roncaban y 12 que no lo hacían. Se determinaron las zonas más estrechas de la nasofaringe, hipofaringe, orofaringe y el grosor del tejido adiposo y musculatura parafaríngeos. Resultados: En los pacientes que roncaban la zona más estrecha de la vía aérea superior fue la zona retro-palatal en la orofaringe. Los pacientes roncadores tenían un índice de masa corporal y diámetro cuello mayores y un área orofaríngea menor. En los exámenes dinámicos observamos que a medida que el grosor de los músculos parafaríngeos aumentó, disminuyó el área medial y lateral de la vía aérea y el área de la orofaringe. Conclusiones: La zona más estrecha de la vía aérea superior es la región retropalatal de la orofaringe, medida tanto con TC como con RM.

Radiographic Identification of Arthroscopically Relevant Proximal Femoral Structures.

BACKGROUND: Anatomic landmarks located on the proximal femur have only recently been defined, and there is a lack of radiographic guidelines for their locations presented in the literature. With the confident identification of these landmarks, radiographs could provide more assistance in preoperative evaluations, intraoperative guidance, and postoperative assessments. PURPOSE: To quantify the radiographic locations of endoscopic landmarks of the proximal femur. STUDY DESIGN: Descriptive laboratory study. METHODS: Ten cadaveric specimens were dissected, and radio-opaque hardware was placed for each landmark of interest. Radiographs were obtained and measurements recorded in anteroposterior (AP) and Dunn 45° views. RESULTS: In the AP view, the gluteus medius insertion was located a mean 12.9 ± 2.4 mm and 34.7 ± 5.1 mm from the piriformis fossa and vastus tubercle, respectively. The piriformis fossa was a mean 14.8 ± 5.9 mm and 4.9 ± 1.9 mm from the anterior and posterior tips of the greater trochanter, respectively. The anterior and posterior tips of the greater trochanter were a mean 14.8 ± 5.1 mm from each other. In the Dunn 45° view, the piriformis fossa was a mean 13.3 ± 2.0 mm, and the vastus tubercle was a mean 21.5 ± 6.0 mm, from the gluteus medius insertion. Moreover, the vastus tubercle was a mean 33.5 ± 6.4 mm from the anterior tip of the greater trochanter and 31.6 ± 8.5 mm from the posterior tip of the greater trochanter. CONCLUSION: In spite of the variation in cadaveric sizes, quantitative descriptions of endoscopic landmarks were reproducible in clinical views. CLINICAL RELEVANCE: A detailed understanding of how the described landmarks present radiographically is relevant to preoperative planning, intraoperative evaluations, and postoperative assessments.