Quantum dots functionalized with 3-mercaptophenylboronic acids as novel nanoplatforms to evaluate sialic acid content on cell membranes.

Sialic acids (SAs) modulate essential physiological and pathological conditions, including cell-cell communication, immune response, neurological disorders, and cancer. Besides, SAs confer negative charges to cell membranes, also contributing to hemorheology. Phenylboronic acids, called as mimetic lectins, have been highlighted to study SA profiles. The association of these interesting molecules with the optical properties of quantum dots (QDs) can provide a deeper/complementary understanding of mechanisms involving SAs. Herein, we explored the thiol affinity to the QD surface to develop a simple, fast and direct attachment procedure to functionalize these nanocrystals with 3-mercaptophenylboronic acids (MPBAs). The functionalization was confirmed by fluorescence correlation spectroscopy and inductively coupled plasma spectrometry. The conjugate specificity/efficiency was proved in experiments using red blood cells (RBCs). A labeling >90% was found for RBCs incubated with conjugates, which reduced to 17% after neuraminidase pretreatment. Moreover, QDs-MPBA conjugates were applied in a comparative study using acute (KG-1) and chronic (K562) myelogenous leukemia cell lines. Results indicated that KG-1 membranes have a greater level of SA, with 100% of cells labeled and a median of fluorescence intensity of ca. 2.5-fold higher when compared to K562 (94%). Therefore, this novel QDs-MPBA conjugate can be considered a promising nanoplatform to evaluate SA contents in a variety of biological systems.

Synthesis of pH Sensitive Dual Capped CdTe QDs: Their Optical Properties and Structural Morphology.

We herein report five different types of thiol dual capped cadmium tellurite quantum dots (CdTe QDs) namely glutathione-mercapto-propanoic acid (QD 1), glutathione-thiolglycolic acid (QD 2), L-cysteine-mercapto-propanoic acid (QD 3), L-cysteine- thiol-glycolic acid (QD 4) and mercapto-propanoic acid-thiol-glycolic (QD 5). Dual-capped CdTe QDs were prepared using a one pot synthetic method. Cadmium acetate and sodium tellurite were respectively used as cadmium and tellurium precursors. Photo-physical properties of the synthesized QDs were examined using UV-Vis and photoluminescence spectroscopy while structural characterization was performed by means of transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. The influence of pH on QD characteristics (fluorescence intensity) was studied using phosphate and citrate buffers and continuous titration with HCl (0.1 N). UV-vis and photoluminescence spectra exhibited sharp absorption band edge with high intensities and improved colloidal stability. All the QDs were found to be in nano-size rang. TEM analysis revealed the presence of spherical nanoparticles while FTIR evidenced successful dual-capping of QDs. Upon pH changes, QDs 3 and 4 demonstrated more remarkable variations in fluorescence intensity than QDs 1 and 2. The pH-sensitivity of these QDs represents a promising feature for further development of potential theranostic nano-devices.

Enzymatic Preparation of Plasmonic-Fluorescent Quantum Dot-Gold Hybrid Nanoprobes for Sensitive Detection of Glucose and Alkaline Phosphatase and Dual-Modality Cell Imaging.

Herein, we develop a route to prepare bifunctional plasmonic-fluorescent quantum dot-gold (QD-Au) hybrid nanoprobes by use of enzymatic reactions. Two bioenzymes, glucose oxidase (GOx) and alkaline phosphatase (ALP) were chosen for the enzymatic preparation of core-satellite or core-shell type CdSe/ZnS@Au hybrid nanostructures. The enzymatic products, H2O2 and l-ascorbic acid, of the two enzymes were exploited as mild reducing agents for controlled Au deposition on QD surfaces. The polymer multilayers by layer-by-layer assembly were used to adjust the separation between QD core and plasmonic Au, which can effectively reduce the quenching effect of the Au on QDs. The as-prepared QD@Au hybrid nanostructures are excellent dual-modality imaging nanoprobes, and can be used for fluorescence and dark-field scattering dual-imaging of MCF-7 cells. More importantly, the two enzymatic reaction systems can be explored for sensitive and selective detection of glucose and alkaline phosphatase, respectively, by monitoring the fluorescence spectra change of QD@Au hybrid nanoparticles, which is very useful for the glucose- and ALP-related disease diagnosis.

Rapid and green synthesis of cadmium telluride quantum dots with low toxicity based on a plant-mediated approach after microwave and ultrasonic assisted extraction: Synthesis, characterization, biological potentials and comparison study.

In this work, a quick, facile and efficient approach was presented for green synthesis of cadmium telluride quantum dots (CdTe QDs) based on an aqueous extract of the Ficus johannis plant. Two extraction methods involving microwave assisted extraction (MWAE; 90 and 270 w; 15 min) and ultrasonic assisted extraction (USAE; 15 min; 45 °C) were performed as eco-friendly, effective, green and fast techniques for the extract preparation of the fruit's plant. The as-prepared plant extracts were used as natural stabilizing precursors in the synthesis of CdTe QDs. The synthesized QDs were characterized using various techniques. The average particle size of the QDs from the X-ray diffraction patterns was calculated to be 1.2 nm. UV-Vis absorption and fluorescence spectroscopic studies show a wide absorption band from 400 to 425 nm and a maximum emission peak around 470 nm, which confirmed the successful synthesis of CdTe QDs via the applied synthetic method. After synthesis and characterization of the samples, the antimicrobial properties, genotoxicity, toxicity and antifungal activities of the as-prepared CdTe QDs were investigated. In addition, antioxidant properties of the samples (QDs and extracts), were evaluated by different antioxidant assays. The results indicate the significant antimicrobial activity of the extract and CdTe QDs samples, with negligible toxicity and genotoxicity impacts.

Synthesis and characterization of cadmium selenide quantum dots doped by europium and investigation of their chemiluminescence properties and antibacterial activities.

Nanoparticles of cadmium selenide (CdSe) doped with europium, were synthesized as stabilizing agents using thioglycolic acid ligand. This method is based on the enhancing effect of CdSe quantum dots (QDs) doped with europium on chemiluminescence (CL) emission. This emission was generated by mixing CdSe QDs with manganese (II), iron (II) and chrome (II) sulfates as catalysts in the presence of hydrogen peroxide (H2 O2 ). The structural characteristics and morphology of these nanoparticles were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet-visible absorption spectroscopy, X-ray pattern and dynamic light scattering methods. The CdSe QDs doped with europium were used as the sensitizer in a luminol-hydrogen peroxide CL system. The sensitized CdSe QDs were analyzed for antibacterial activity against Gram-positive or Gram-negative bacteria. The results showed that the CdSe QDs are effective against all the studied bacteria, effectiveness was especially higher for Bacillus subtilis.

The essentialness of glutathione reductase GorA for biosynthesis of Se(0)-nanoparticles and GSH for CdSe quantum dot formation in Pseudomonas stutzeri TS44.

Pseudomonas stutzeri TS44 was able to aerobically reduce Se(IV) into SeNPs and transform Se(IV)/Cd(II) mixture into CdSe-QDs. The SeNPs and CdSe-QDs were systematically characterized by surface feature analyses, and the molecular mechanisms of SeNPs and CdSe-QD formation in P. stutzeri TS44 were characterized in detail. In vivo, under 2.5 mmol/L Se(IV) exposure, GorA was essential for catalyzing of Se(IV) reduction rate decreased by 67% when the glutathione reductase gene gorA was disrupted, but it was not decreased in the glutathione synthesis rate-limiting gene gshA mutated strain compared to the wild type. The complemented strains restored the phenotypes. While under low amount of Se(IV) (0.5 mmol/L), GSH played an important role for Se(IV) reduction. In vitro, GorA catalyzed Se(IV) reduction with NADPH as the electron donor (Vmax of 3.947 ± 0.1061 µmol/min/mg protein under pH 7.0 and 28℃). In addition, CdSe-QDs were successfully synthesized by a one-step method in which Se(IV) and Cd(II) were added to bacterial culture simultaneously. GSH rather than GorA is necessary for CdSe-QD formation in vivo and in vitro. In conclusion, the results provide new findings showing that GorA functions as a selenite reductase under high amount Se(IV) and GSH is essential for bacterial CdSe-QD synthesis.

Host-guest supramolecular assembly directing beta-cyclodextrin based nanocrystals towards their robust performances.

Fluorescent CdTe nanocrystals (NCs) capped with beta-cyclodextrin (ß-CD) are successfully synthesized by host-guest supramolecular assembly of the hydrophobic alkyl chains of N-acetyl-l-cysteine (NAC) on the surface of CdTe NCs and eco-friendly ß-CD via the promising simple hydrothermal method in our experiments. The as-prepared NCs display better stability and lower toxicity compared with traditional those only capped with NAC. Specially, cytotoxicity experiments to human umbilical vein endothelial cells in vitro and zebrafish embryo toxicological tests in vivo are performed to determine the toxicity of CdTe NCs. For their practical applications, the promising red-luminescent NCs are employed as stable and low poison red phosphors to fabricate white light-emitting diodes (WLEDs) with remarkable color-rendering index (CRI) being 91.6. This research offers significance for solving the difficulty in toxicity and instability of heavy metal based NCs, which has potential applications in future optoelectronic devices and biomarkers.

Chiral ligand-induced photoluminescence intermittence difference of CdTe quantum dots.

Semiconductor quantum dots (QDs) are a new nano-material, and their unique optical properties have become a focal point of research in both academia and industry. In this study, we studied photoluminescence (PL) intermittence (or 'blinking') behaviors of individual QDs prepared with different chiral ligands by using single molecule microscopy and single molecule fluorescence correlation spectroscopy (FCS). We found that the chirality of N-isobutyryl-d/l-cysteine (D/L-NIC) as surface stabilizers significantly influences PL blinking behaviors of cadmium telluride (CdTe) QDs synthesized in aqueous solution. The 'on time' distribution and the power-law exponent analyses show that the D-NIC more efficiently suppresses the blinking of QDs over L-NIC. Ensemble spectroscopies verfied that the remarkably-different blinking behaviors of QDs induced by ligand chirality were attributed to the different number of chiral ligands bound in the surface of QDs.

Preparation of Microkernel-Based Mesoporous (SiO2-CdTe-SiO2)@SiO2 Fluorescent Nanoparticles for Imaging Screening and Enrichment of Heat Shock Protein 90 Inhibitors from Tripterygium Wilfordii.

The currently utilized ligand fishing for bioactive molecular screening from complex matrixes cannot perform imaging screening. Here, we developed a new solid-phase ligand fishing coupled with an in situ imaging protocol for the specific enrichment and identification of heat shock protein 90 (Hsp 90) inhibitors from Tripterygium wilfordii, utilizing a multiple-layer and microkernel-based mesoporous nanostructure composed of a protective silica coating CdTe quantum dot (QD) core and a mesoporous silica shell, i.e., microkernel-based mesoporous (SiO2-CdTe-SiO2)@SiO2 fluorescent nanoparticles (MMFNPs) as extracting carries and fluorescent probes. The prepared MMFNPs showed a highly uniform spherical morphology, retention of fluorescence emission, and great chemical stability. The fished ligands by Hsp 90α-MMFNPs were evaluated via the preliminary bioactivity based on real-time cellular morphology imaging by confocal laser scanning microscopy (CLSM) and then identified by mass spectrometry (MS). Celastrol was successfully isolated as an Hsp 90 inhibitor, and two other specific components screened by Hsp 90α-MMFNPs, i.e., demecolcine and wilforine, were preliminarily identified as potential Hsp 90 inhibitors through the verification of strong affinity to Hsp 90 and antitumor bioactivity. The approach based on the MMFNPs provides a strong platform for imaging screening and discovery of plant-derived biologically active molecules with high efficiency and selectivity.

Facet-to-facet Linking of Shape-anisotropic Colloidal Cadmium Chalcogenide Nanostructures.

Here, we describe a protocol that allows for shape-anisotropic cadmium chalcogenide nanocrystals (NCs), such as nanorods (NRs) and tetrapods (TPs), to be covalently and site-specifically linked via their end facets, resulting in polymer-like linear or branched chains. The linking procedure begins with a cation-exchange process in which the end facets of the cadmium chalcogenide NCs are first converted to silver chalcogenide. This is followed by the selective removal of ligands at their surface. This results in cadmium chalcogenide NCs with highly reactive silver chalcogenide end facets that spontaneously fuse upon contact with each other, thereby establishing an interparticle facet-to-facet attachment. Through the judicious choice of precursor concentrations, an extensive network of linked NCs can be produced. Structural characterization of the linked NCs is carried out via low- and high-resolution transmission electron microscopy (TEM), as well as energy-dispersive X-ray spectroscopy, which confirm the presence of silver chalcogenide domains between chains of cadmium chalcogenide NCs.

Synthesis of permeable yolk-shell structured gadolinium-doped quantum dots as a potential nanoscale multimodal-visible delivery system.

Developing a nanoscale drug delivery system with magnetic resonance imaging (MRI)/fluorescence imaging (FL) visibility to optimize the delivery efficiency and therapeutic efficacy under image guidance has attracted great attentions in the area of nanomedicine. Herein, a novel permeable yolk-shell structured gadolinium-doped quantum dots nanocomposite was synthesized as a theranostic nanocarrier via an indirectly doping method. The as-prepared permeable nanoparticles with tunable color fluorescent emission, paramagnetic and accessible mesoporous channels could be developed as a novel nanomedical platform for integrated multimodal diagnosis and therapy. The hydrophilic nanocomposites exhibited tunable fluorescence as well as high longitudinal relaxivity (r1 = 17.32mM-1s-1) in water with good colloidal stability. In vivo animal experiments further verified CSSP could achieve FL/MRI dual modality imaging. The widely used antineoplastic anthracycline drug doxorubicin (DOX) was absorbed into the permeable nanospheres with 95.3% loading efficiency and released in a pH-sensitive pattern. In vitro cancer cell cytotoxicity tests verified that the DOX-loaded nanocomposites had enhanced cytotoxicity compared with free DOX at the same concentration. The as-prepared nanocomposites present great potential as MRI/FL-visible nanoscale drug carrier to realize imaging-guided personalized therapy.

Photocatalytic and antibacterial activity of cadmium sulphide/zinc oxide nanocomposite with varied morphology.

Nanocomposites with multifunctional application prospects have already dragged accelerating interests of materials scientists. Here we present CdS/ZnO nanocomposites with different morphology engineering the precursor molar ratio in a facile wet chemical synthesis route. The materials were structurally and morphologically characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray analysis (EDX) and high-resolution transmission electron microscopy (HRTEM). The growth mechanism of the composite structure with varying molar ratio is delineated with oriented attachment self assemble techniques. Photocatalytic activity of CdS/ZnO nanocomposites with varying morphology were explored for the degradation of rhodamine B (RhB) dye in presence of visible light irradiation and the results reveal that the best catalytic performance arises in CdS/ZnO composite with 1: 1 ratio. The antibacterial efficiency of all nanocomposites were investigated on Escherichia coli, Staphylococcus aureus and Klebsiella pneumonia without light irradiation. Antibacterial activity of CdS/ZnO nanocomposites were studied using the bacteriological test-well diffusion agar method and results showed significant antibacterial activity in CdS/ZnO composite with 1:3 ratio. Overall, CdS/ZnO nanocomposites excel in different potential applications, such as visible light photocatalysis and antimicrobial activity with their tuneable structure.

Photocatalytic Activities of Copper Doped Cadmium Sulfide Microspheres Prepared by a Facile Ultrasonic Spray-Pyrolysis Method.

Ultrasonic spray pyrolysis is a superior method for preparing and synthesizing spherical particles of metal oxide or sulfide semiconductors. Cadmium sulfide (CdS) photocatalysts with different sizes and doped-CdS with different dopants and doping levels have been synthesized to study their properties of photocatalytic hydrogen production from water. The CdS photocatalysts were characterized with scanning electron microscopy (SEM), X-ray fluorescence-spectrometry (XRF), UV-Vis absorption spectra and X-ray diffraction (XRD) to study their morphological and optical properties. The sizes of the prepared CdS particles were found to be proportional to the concentration of the metal nitrates in the solution. The CdS photocatalyst with smaller size showed a better photocatalytic activity. In addition, Cu doped CdS were also deposited and their photocatalytic activities were also investigated. Decreased bandgaps of CdS synthesized with this method were found and could be due to high density surface defects originated from Cd vacancies. Incorporating the Cu elements increased the bandgap by taking the position of Cd vacancies and reducing the surface defect states. The optimal Cu-doped level was found to be 0.5 mol % toward hydrogen evolution from aqueous media in the presence of sacrificial electron donors (Na2S and Na2SO3) at a pH of 13.2. This study demonstrated that ultrasonic spray pyrolysis is a feasible approach for large-scale photocatalyst synthesis and corresponding doping modification.

Synthesis and Cell Imaging of a Near-Infrared Fluorescent Magnetic "CdHgTe-Dextran-Magnetic Layered Double Hydroxide-Fluorouracil" Composite.

In this article, a water-soluble near-infrared quantum dots of CdHgTe were prepared and subsequently combined with the drug delivery system "dextran-magnetic layered double hydroxide-fluorouracil" (DMF) to build a new nanostructure platform in form of CdHgTe@DMF, in which the fluorescent probe function of quantum dots and the magnetic targeting transport and slow-release curative effect of DMF were blended availably together. The luminescent property particle size, and internal structure of the composite were characterized using fluorescence spectrophotometer, ultraviolet spectrophotometer, laser particle size distribution, TEM, X-ray diffraction, and Fourier transform infrared. The experimental study on fluorescent tags effect and magnetic targeting performance of the multifunctional platform were performed by fluorescent confocal imaging. The results showed that the CdHgTe could be grafted successfully onto the surface of DMF by electrostatic coupling. The CdHgTe@DMF composite showed super-paramagnetic and photoluminescence property in the near-infrared wavelength range of 575-780 nm. Compared with CdHgTe, the CdHgTe@DMF composite could significantly improve the cell imaging effect, the label intensity increased with the magnetic field intensity, and obeyed the linear relationship Dmean = 1.758 + 0.0075M under the conditions of magnetic field interference. It can be implied that the CdHgTe@DMF may be an effective multifunction tool applying to optical bioimaging and magnetic targeted therapy.

Facile synthesis of CdTe@GdS fluorescent-magnetic nanoparticles for tumor-targeted dual-modal imaging.

Multimodal imaging has made great contribution for diagnosis and therapy of disease since it can provide more effective and complementary information in comparison to any single imaging modality. The design and fabrication of fluorescent-magnetic nanoparticles for multimodal imaging has rapidly developed over the years. Herein, we demonstrate the facile synthesis of GdS coated CdTe nanoparticles (CdTe@GdS NPs) as multimodal agents for fluorescence (FL) and T1-weighted magnetic resonance (MR) imaging. These nanoparticles obtain both prominent fluorescent and paramagnetic properties by coating the GdS shell on the surface of CdTe core via a simple room-temperature route in aqueous solution directly. It is shown that the as-prepared CdTe@GdS NPs have high quantum yield (QY) value of 12% and outstanding longitudinal relaxation rate (r1) of 11.25 mM s(-1), which allow them to be employed as FL/MR dual-modal imaging contrast agents. They also exhibit small particle size of 5 nm, excellent colloidal stability and low cellular toxicity for concentrations up to 750 µg mL(-1). In addition, with the conjugation of folic acid, the nanoparticles were successfully used for tumor-targeted FL/MR dual-modal imaging in vitro and in vivo.

Sensitive determination of enoxacin in pharmaceutical formulations by its quench effect on the fluorescence of glutathione-capped CdTe quantum dots.

A sensitive and simple method for the determination of enoxacin (ENX) was developed based on the fluorescence quenching effect of ENX for glutathione (GSH)-capped CdTe quantum dots (QDs). Under optimum conditions, a good linear relationship was obtained from 4.333 × 10(-9) mol⋅L(-1) to 1.4 × 10(-5) mol⋅L(-1) with a correlation coefficient (R) of 0.9987, and the detection limit (3σ/K) was 1.313 × 10(-9) mol⋅L(-1). The corresponding mechanism has been proposed on the basis of electron transfer supported by ultraviolet-visible (UV) light absorption, fluorescence spectroscopy, and the measurement of fluorescence lifetime. The method has been applied to the determination of ENX in pharmaceutical formulations (enoxacin gluconate injections and commercial tablets) with satisfactory results. The proposed method manifested several advantages such as high sensitivity, short analysis time, low cost and ease of operation.

Synthesis, characterization and biocompatibility of cadmium sulfide nanoparticles capped with dextrin for in vivo and in vitro imaging application.

BACKGROUND: The safe use in biomedicine of semiconductor nanoparticles, also known as quantum dots (QDs), requires a detailed understanding of the biocompatibility and toxicity of QDs in human beings. The biological characteristics and physicochemical properties of QDs entail new challenges regarding the management of potential adverse health effects following exposure. At certain concentrations, the synthesis of semiconductor nanoparticles of CdS using dextrin as capping agent, at certain concentration, to reduce their toxicity and improves their biocompatibility. RESULTS: This study successfully synthesized and characterized biocompatible dextrin-coated cadmium sulfide nanoparticles (CdS-Dx/QDs). The results show that CdS-Dx/QDs are cytotoxic at high concentrations (>2 µg/mL) in HepG2 and HEK293 cells. At low concentrations (<1 µg/mL), CdS-Dx/QDs were not toxic to HepG2 or HeLa cells. CdS-Dx nanoparticles only induced cell death by apoptosis in HEK293 cells at 1 µg/mL concentrations. The in vitro results showed that the cells efficiently took up the CdS-Dx/QDs and this resulted in strong fluorescence. The subcellular localization of CdS-Dx/QDs were usually small and apparently unique in the cytoplasm in HeLa cells but, in the case of HEK293 cells it were more abundant and found in cytoplasm and the nucleus. Animals treated with 100 µg/kg of CdS-Dx/QDs and sacrificed at 3, 7 and 18 h showed a differential distribution in their organs. Intense fluorescence was detected in lung and kidney, with moderate fluorescence detected in liver, spleen and brain. The biocompatibility and toxicity of CdS-Dx/QDs in animals treated daily with 100 µg/kg for 1 week showed the highest level of fluorescence in kidney, liver and brain. Less fluorescence was detected in lung and spleen. There was also evident presence of fluorescence in testis. The histopathological and biochemical analyses showed that CdS-Dx/QDs were non-toxic for rodents. CONCLUSIONS: The in vitro and in vivo studies confirmed the effective cellular uptake and even distribution pattern of CdS-Dx/QDs in tissues. CdS-Dx/QDs were biocompatible with tissues from rodents. The CdS-Dx/QDs used in this study can be potentially used in bio-imaging applications.

Facile Synthesis of Glutathione-capped CdS Quantum Dots as a Fluorescence Sensor for Rapid Detection and Quantification of Paraquat.

This paper describes a convenient and rapid fluorescence sensor for determination of paraquat (PA) based on glutathione-capped CdS quantum dots (QDs). The methodology enabled the use of a simple synthesis procedure for water solubilization of CdS QDs via a fast route using glutathione as a capping agent within 15 min. The resulting water-soluble QDs exhibit a strong fluorescence emission at 536 nm with high and reproducible photostability. PA is an important class of electron acceptors for QDs. Thus, the fluorescence intensity of the glutathione-capped CdS QDs probe could be dramatically quenched by PA due to the electron transfer mechanism. The fluorescence intensity of the CdS QDs system was proportional to PA concentration in the range of 0.025 to 1.5 µg mL(-1), with a detection limit of 0.01 µg mL(-1). The time of analysis sample, including preparation of QDs and fluorescent measurement for PA, was only 20 min. Most of the potentially coexisting substances did not interfere with the PA-induced quenching effect except diquat. Furthermore, the analytical applicability of the proposed method was demonstrated by analyzing PA in water, rice and cabbage samples, and the recoveries were between 86 and 105% which satisfied the requirement of detection for PA. These results showed that the proposed method was simple in design and fast in operation, and could be used as a sensitive tool for detecting PA in environmental and agricultural samples.

Effect of organic-ligands on the toxicity profiles of CdS nanoparticles and functional properties.

CdS nanoparticles are one among the most promising agents for fluorescent imaging. Hence, it is essential to develop new strategies to overcome the cytotoxicity of these nanoparticles. Surface modification is one of the simplest and effective techniques. This paper assesses the effect of surface modification on toxicity of the CdS nanoparticles. Unmodified CdS and surface-modified CdS nanoparticles were synthesized in an aqueous medium using a wet chemical route at room temperature. The surface modification of the CdS nanoparticles with polyvinylpyrrolidone (PVP) and cysteine was confirmed using infrared absorption studies. The diameters of unmodified CdS, PVP-modified CdS, and cysteine-modified CdS nanoparticles were determined using HRTEM. They exhibited luminescence in the range from 500 to 800 nm. The cytotoxic effects of these CdS nanoparticles were investigated in cultures of Vero cells. The results indicated that Vero cell viability was higher for the surface-modified CdS nanoparticles than for the unmodified CdS nanoparticles. The reduction in the toxicity was related to the nature of the capping agents used for the surface modification, and the particle size.

Review: three synthesis methods of CdX (X = Se, S or Te) quantum dots.

Quantum dots (QDs) are one of the first nanotechnologies to be integrated with the biological sciences that used for imaging or tracking macromolecules/cells in cell/tissue. Because of QDs are important in biomedical and biological applications, identify a variety of synthesis methods to produce QDs with different characteristics also is particularly important. Hence, in this review the authors discussed three methods for synthesis of heavy metal chalcogenide-based QDs for use in biomedical field: (i) Organometallic method for synthesis of QDs consists of three components: precursors, organic surfactants and solvents. The authors also discussed water-solubilisation strategies of synthesised QDs including encapsulation and ligand exchange. (ii) Aqueous synthesis technique using short-chain thiols as stabilising agents is a useful alternative to organometallic synthesis of CdSe, CdS and CdTe QDs. (iii) The third method discussed in this article for QDs synthesis involves the utilise of microorganisms to prepare QDs with controlled size, shape, chemical composition and functionality. The authors also discussed recently new methods for the synthesis of the appropriate QDs for use in biology. In addition, attachment of biomolecules such as antibodies, oligonucleotides on the surface of QDs for specific targeting and different opinions about toxicity of QD have been studied.