Synthesis, characterization and stability of Cr(III) and Fe(III) hydroxides.

Chromium is a common contaminant of soils and aquifers and constitutes a major environmental problem. In nature, chromium usually exists in the form of two oxidation states, trivalent, Cr(III), which is relatively innocuous for biota and for the aquatic environment, and hexavalent, Cr(VI) which is toxic, carcinogenic and very soluble. Accordingly, the majority of wastewater and groundwater treatment technologies, include a stage where Cr(VI) is reduced to Cr(III), in order to remove chromium from the aqueous phase and bind the element in the form of environmentally stable solid compounds. In the absence of iron the final product is typically of the form Cr(OH)3·xH2O whereas in the presence of iron the precipitate is a mixed Fe(1-x)Crx(OH)3 phase. In this study, we report on the synthesis, characterisation and stability of mixed (Fex,Cr1-x)(OH)3 hydroxides as compared to the stability of Cr(OH)3. We established that the plain Cr(III) hydroxide, abiding to the approximate molecular formula Cr(OH)3·3H2O, was crystalline, highly soluble, i.e. unstable, with a tendency to transform into the stable amorphous hydroxide Cr(OH)3(am) phase. Mixed Fe0.75Cr0.25(OH)3 hydroxides were found to be of the ferrihydrite structure, Fe(OH)3, and we correlated their solubility to that of a solid solution formed by plain ferrihydrite and the amorphous Cr(III) hydroxide. Both our experimental results and thermodynamic calculations indicated that mixed Fe(III)-Cr(III) hydroxides are more effective enhancers of groundwater quality, in comparison to the plain amorphous or crystalline Cr(III) hydroxides, the latter found to have a solubility typically higher than 50µg/l (maximum EU permitted Cr level in drinking water), while the amorphous Cr(OH)3(am) phase was within the drinking water threshold in the range 5.7

Synthesis of AlPO4-5 and CrAPO-5 using aluminum dross.

AlPO(4)-5 and its chromium-containing analogue, CrAPO-5, were prepared using aluminum dross in the presence of triethylamine as a structure directing agent; both Al dross powder and an extracted precipitate from Al dross in an alkali solution were used as an aluminum source. These materials were characterized by XRD, BET surface area measurement, SEM, EDX, XRF, ESR, and UV-vis spectroscopy. Their textural properties were found close to those of the corresponding reference samples prepared using pure Al(OH)(3). CrAPO-5 samples prepared from the aluminum dross were tested as a catalyst for liquid phase oxidation of tetralin using t-butyl hydroperoxide as an oxidizing agent, which showed virtually identical catalytic performances to that obtained by a reference CrAPO-5 catalyst.