Design and in vitro antibiofilm activity of propolis diffusion-controlled biopolymers.

In this study, a novel pH-sensitive hydrogel beads that is based on gelatin/sodium alginate/chitosan (GEL/SA/CS) loaded with propolis ethanolic extracts (PE) were synthesized. The swelling behavior of GEL/SA/CS hydrogel beads was studied in different pH solutions and compared with unloaded CS (GEL/SA) hydrogel beads. The in vitro release studies have been revealed using four different pH (1.3, 5.0, 6.0, and 6.8), a saliva environment (pH 6.8), a simulated gastric fluid (SGF) (pH 1.3), and a simulated intestinal fluid (SIF) (pH 6.8) to simulate the physiological conditions in gastrointestinal (GI) tract. Propolis-loaded hydrogel beads were found to be stable at pH 1.3, 5.0, 6.0, simulated saliva, SGF, and SIF mediums, whereas the beads lose their stability at pH 6.8 buffer solution. Tested microorganisms displayed greater sensitivity to PE-loaded hydrogel beads compared with pure propolis. Contrary to antimicrobial activity results, antibiofilm activity results of PE-loaded GEL/SA and GEL/SA/CS hydrogel beads were found at low levels. According to the obtained results, the propolis-loaded GEL/SA/CS hydrogel beads synthesized within this study can be used in the treatment of GI tract diseases such as oral mucositis, gastric ulcer, ulcerative colitis, and GI cancer, as controlled releasing carriers of propolis.

Na2S2O8 Nanoparticles Trigger Antitumor Immunotherapy through Reactive Oxygen Species Storm and Surge of Tumor Osmolarity.

Although more attention has been attracted to the therapy based on reactive oxygen species (ROS) for tumor therapy in recent years, such as photodynamic therapy and chemodynamic therapy, the limited ROS production rate leads to their poor treatment effect owing to the relatively low content of O2 and H2O2 in tumor microenvironments, confined light penetration depth, strict Fenton reaction conditions (pH 3-4), and so on. Therefore, it is urgent to explore the new agents with highly efficient ROS generation capacity. Herein, we first prepared phospholipid coated Na2S2O8 nanoparticles (PNSO NPs) as new ROS generation agents for in situ generating Na+ and S2O82- through gradual degradation, which can then be changed to toxic •SO4- (a novel reported ROS) and •OH regardless of the amount of H2O2 and pH value in the tumor microenvironment (TME). As the generation of a large amount of Na+, PNSO NPs can bypass the ion transport rules of cells through endocytosis to deliver large amounts of Na+ into the cells, resulting in a surge of osmolarity and rapid cell rupture and lysis. Osmotic pressure induced by PNSO NPs will further lead to an unusual manner of cell death: caspase-1-related pyroptosis. Moreover, all of above effects will cause high immunogenic cell death, regulate the immunosuppressed TME, and then activate systemic antitumor immune responses to combat tumor metastasis and recurrence. We believe PNSO NPs will be new and potential ROS generation agents, and this work will broaden the thinking of the exploring of new antitumor nanodrugs.

Degradation of tetracycline in water by biochar supported nanosized iron activated persulfate.

Biochar supported nanosized iron (nFe(0)/BC) was synthesized and used as a persulfate (PS) activator to degradation tetracycline (TC). The influence of the initial pH values, PS and nFe(0)/BC dosage, initial TC concentration, and coexist anions were investigated. In the nFe(0)/BC-PS system, TC could be effectively removed at various pH values (3.0-9.0). The degradation efficiency of TC (100 mg/L) was 97.68% using nFe(0)/BC (0.4 g/L) and persulfate (1 mM) at pH 5.0. Coexisting ions (HCO3- and NO3-) had an inhibitory effect on TC degradation. The removal of TC could be fitted by a pseudo-second-order model. Electron-Spin Resonance (ESR) analysis and scavenging tests suggested that sulfate radicals (SO4·-) and hydroxyl radicals (HO·) were responsible for TC degradation. Details of the advanced oxidation process (AOP)-induced degradation pathways of TC were determined based on liquid chromatography mass-spectrometry (LC-MS) analysis. The nFe(0)/BC could still maintain 86.38% of its original removal capacity after five cycles. The findings of this study proved that nFe(0)/BC can be applied to activate PS for the treatment of pollution caused by TC.

Nanosized drug-eluting bead for transcatheter arterial chemoembolization (ND-TACE).

Commercially available drug-eluting embolization beads (100-500 µm) reduced the occurrence of adverse events related to an anticancer drug, but were unascertained to remarkably benefit the transcatheter arterial chemoembolization (TACE) treatment of intermediate-stage liver cancer. Dextran-coated arsenite nanoparticles with the size ranging from 400 to 600 nm were developed as a nanosized drug-eluting bead (NDEB) for chemoembolization therapy of the rabbit VX2 liver tumor. We fully characterized their relevant physicochemistry and drug release properties. Their hemolysis was investigated before vessel embolization. The introduction of the NDEB allowed continuous embolization of tumor feeding vessels and sustained release of arsenic trioxide, thereby causing severe tumor necrosis and reduced vascularity. Sonography including B mode ultrasound, color Doppler flow imaging (CDFI) and dynamic contrast-enhanced ultrasound (CEUS) were performed to evaluate the tumor vascularity and viability. Additionally, its hepatotoxicity was tolerable at a medium dose. NDEB-TACE might be an effective therapeutic strategy for interventional therapy.

Efficient removal of trichloroethene in oxidative environment by anchoring nano FeS on reduced graphene oxide supported nZVI catalyst: The role of FeS on oxidant decomposition and iron leakage.

The performance of trichloroethene (TCE) removal was initially investigated in sodium persulfate (SPS) or potassium monopersulfate triple salt (PMS) oxidative environment by reduced graphene oxide (rGO) supported nZVI (nZVI-rGO) catalyst and further the role of sulphur by anchoring nano FeS on nZVI-rGO (FeS@nZVI-rGO) was evaluated. The high usage of oxidants and stability of FeS@nZVI-rGO catalyst were significantly improved due to the insoluble nature of this innovative catalyst by involvement of nano FeS which limited the rapid iron loss caused by the corrosion of active sites and mitigated rapid oxidants decomposition in FeS@nZVI-rGO/SPS and FeS@nZVI-rGO/PMS systems. The tests for target contaminant removal showed that over 95 % TCE could be removed at 100 mg L-1 FeS@nZVI-rGO and 1.2 mM SPS or 0.3 mM PMS dosages, in which over 85 % TCE could be dechlorinated. The reactive oxygen radicals (ROSs) generation mechanisms and their contribution to TCE removal were investigated through radical scavenge tests in both systems, indicating that both HO and SO4- were the major ROSs rather than O2-. In conclusion, this study revealed the well function and fundamental mechanism of this innovative catalyst by anchoring nano FeS and worth of further demonstration of this technique in TCE contaminated groundwater remediation application.

Conditioning with zero-valent iron or Fe2+ activated peroxydisulfate at an acidic initial sludge pH removed intracellular antibiotic resistance genes but increased extracellular antibiotic resistance genes in sewage sludge.

Sulfate radical (SO4-)-based conditioning methods, such as zero-valent iron (ZVI, i.e., Fe0) or ferrous iron (Fe2+) activated peroxydisulfate (S2O82-), have recently developed to improve sludge dewaterability, but it remains unclear how they impact the intracellular and extracellular antibiotic resistance genes (ARGs) in sewage sludge. In this study, it was found that conditioning treatments that used ZVI/S2O82- or Fe2+/S2O82- system, at an acidic initial sludge pH, removed the intracellular ARGs and intI1 and the extracellular intI1 from sewage sludge, but led to the accumulation of extracellular ARGs of aadA-01, aadA-02, aadA1, aadA2-03, and strB in conditioned sludge. During sludge conditioning with ZVI/S2O82- or Fe2+/S2O82-, bacterial hosts of ARGs and intI1 were seriously lysed to release the intracellular ARGs and intI1 to the extracellular environment, thus removing intracellular ARGs and intI1 in sludge, while the released ARGs and intI1 were primarily degraded by the produced SO4- to attenuate most extracellular ARGs and intI1. However, the relatively lower degradation ability of SO4- for extracellular ARGs of aadA-01, aadA-02, aadA1, aadA2-03, and strB led to their accumulation in conditioned sludge. Therefore, SO4--based conditioning methods can be employed to reduce ARGs in sludge, but the subsequent treatment of sludge dewatering filtrate requires more attention.

Oxidation of dextran using H2O2 and NaClO/NaBr and their applicability in iron chelation.

The structural modification of polysaccharides directly affects their physicochemical properties and applications. Dextran, a chained polysaccharide, consists of multiple d-glucose molecules with repetitive structures. In this study, the physicochemical properties of oxidized dextran (DO) at different concentrations of NaClO/NaBr and H2O2 were compared. The results showed that NaClO/NaBr oxidation is more conducive to the formation of carboxyl groups. Oxidized dextran with NaClO/NaBr (DOB) showed good iron (III) chelating ability, and the DOB­iron (III) complex (DOBIC) had an iron content of 28.31%. According to structural analysis, NaClO/NaBr (2 g/100 g of active chlorine) and H2O2 (4 g/100 g), respectively, oxidize the C1 and C2 hydroxyl groups of dextran to carboxyl groups and open the ring when DO and iron have the strongest chelation ability. The complex is indeed a chelate iron complex, and iron core is composed of iron oxyhydroxide or the ß-FeOOH mineral polymorph. These results indicate that DOBIC is expected to be a good iron supplement or food additive to strengthen iron.

Metabolism and disposition of arsenic species from oral dosing with sodium arsenite in neonatal CD-1 mice. IV. Toxicokinetics following gavage administration and lactational transfer.

Arsenic is a ubiquitous contaminant, with typical human dietary intake below 1 µg/kg bw/d and extreme drinking water exposures up to ∼50 µg/kg bw/d. The formation and binding of trivalent metabolites are central to arsenic toxicity and strong human evidence suggests special concern for early life exposures in the etiology of adult diseases, especially cancer. This study measured the metabolism and disposition of arsenite in neonatal mice to understand the role of maturation in metabolic activation and detoxification of arsenic. Many age-related differences were observed after gavage administration of arsenite, with consistent evidence in blood and tissues for higher exposures to trivalent arsenic species in neonatal mice related to the immaturity of metabolic and/or excretory functions. The evidence for greater tissue binding of arsenic species in young mice is consistent with enhanced susceptibility to toxicity based on metabolic and toxicokinetic differences alone. Lactational transfer from arsenite-dosed dams to suckling mice was minimal, based on no dosing-related changes in the levels of arsenic species in pup blood or milk collected from the dams. Animal models evaluating whole-life exposure to inorganic arsenic must use direct dosing in early neonatal life to predict accurately potential toxicity from early life exposures in children.

Comparative study of the toxicity between three non-steroidal anti-inflammatory drugs and their UV/Na2S2O8 degradation products on Cyprinus carpio.

The efficiency of advanced oxidation processes (AOPs) for disposing of non-steroidal anti-inflammatory drugs (NSAIDs) has been widely studied, but the environmental fates and effects of the NSAIDs and their degradation products (DPs) are poorly understood. In this study, the efficiency of ultraviolet light/Na2S2O8 (UV/PS) in degrading three NSAIDs-diclofenac, naproxen, and ibuprofen-and the toxicity of their DPs on Cyprinus carpio (C. carpio) was investigated. Results showed that the three NSAIDs can be completely removed (removal rate > 99.9%) by UV/PS, while the mineralization rate of the NSAIDs was only 28%. When C. carpio were exposed to 0.1 µM NSAIDs, 10 µM persulfate (PS), and 0.1 µM DPs of the NSAIDs for 96 h, respectively, the toxicity effects are as the NSAID DPs > PS > NSAIDs. Research results into the time-dependent effect of NSAID DPs on C. carpio demonstrated that obvious toxicity effects were observed in the first 48 hours, and the toxicity effects strengthened over time. NSAID DPs may have more severe toxicity effects than NSAIDs on C. carpio; therefore, the operating conditions of UV/PS must be optimized to eliminate the ecotoxicity of DPs.

Catalytic Degradation of Diatrizoate by Persulfate Activation with Peanut Shell Biochar-Supported Nano Zero-Valent Iron in Aqueous Solution.

An emerging pollutant, diatrizoate (DTZ) has been frequently detected in aqueous solution. Unique reticular peanut shell biochar (BC)-supported nano zero-valent iron (nZVI) composite (nZVI/BC) was successfully synthesized and used as a catalyst for activating persulfate (PS) to promote the removal of DTZ. The structure and morphology of the nanocomposite materials were characterized by scanning electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller measurements, and Fourier transform infrared spectroscopy. The degradation of DTZ (20 mg L-1) was achieved by activating PS with the nanocomposite material. The removal of DTZ reached nearly 100% using 25 mM PS and 0.45 g L-1 nZVI/2BC (mass ratio of nZVI and BC at 1:2) nanocomposite material at pH 3.0 and 25 °C. Influencing factors, such as dosages of nZVI/2BC and PS, temperature, and pH were also investigated. The mechanisms of PS activation with nZVI/2BC were discussed, including BC property, electron transfer, and the identification of free radicals in the reaction. The findings demonstrated that nZVI/BC-PS (peanut shell BC-supported nZVI activating PS) is a promising material for the treatment of refractory organic pollutants.

Activation of persulfate by homogeneous and heterogeneous iron catalyst to degrade chlortetracycline in aqueous solution.

This study investigates the removal of chlortetracycline (CTC) antibiotic using sulfate radical-based oxidation process. Sodium persulfate (PS) was used as a source to generate sulfate radicals by homogeneous (Fe2+) and heterogeneous (zero valent iron, ZVI) iron as a catalyst. Increased EDTA concentration was used to break the CTC-Fe metal complexes during CTC estimation. The influence of various parameters, such as PS concentration, iron (Fe2+ and ZVI) concentration, PS/iron molar ratio, and pH were studied and optimum conditions were reported. CTC removal was increased with increasing concentration of PS and iron at an equal molar ratio of PS/Fe2+ and PS/ZVI processes. PS/Fe2+ and PS/ZVI oxidation processes at 1:2 (500 µM PS and 1000 µM) molar ratio showed 76% and 94% of 1 µM CTC removal in 2 h. Further increased molar ratio 1:2 onwards, PS/Fe2+ process showed a slight increase in CTC degradation whereas in PS/ZVI process showed similar degradation to 1:2 (PS/Fe) ratio at constant PS 500 µM concentration. Slower activation of persulfate which indirectly indicates the slower generation of sulfate radicals in PS/ZVI process showed higher degradation efficiency of CTC. The detected transformation products and their estrogenicity results stated that sulfate radicals seem to be efficient in forming stable and non-toxic end products.

Application of persulfate-oxidation foam spraying as a bioremediation pretreatment for diesel oil-contaminated soil.

This study investigated a persulfate-bioaugmentation serial foam spraying technique to remove total petroleum hydrocarbons (TPHs) present in diesel-contaminated unsaturated soil. Feeding of remedial agents by foam spraying increased the infiltration/unsaturated hydraulic conductivity of reagents into the unsaturated soil. Persulfate mixed with a surfactant solution infiltrated the soil faster than peroxide, resulting in relatively even soil moisture content. Persulfate had a higher soil infiltration tendency, which would facilitate its distribution over a wide soil area, thereby enhancing subsequent biodegradation efficiency. Nearly 80% of soil-TPHs were degraded by combined persulfate-bioaugmentation foam spraying, while bioaugmentation foam spraying alone removed 52%. TPH fraction analysis revealed that the removal rate for the biodegradation recalcitrant fraction (C18 to C22) in deeper soil regions was higher for persulfate-bioaugmentation serial foam application than for peroxide-bioaugmentation foam application. Persulfate-foam spraying may be superior to peroxide for TPH removal even at a low concentration (50 mN) because persulfate-foam is more permeable, persistent, and does not change soil pH in the subsurface. Although the number of soil microbes declines by oxidation pretreatment, bioaugmentation-foam alters the microbial population exponentially.

Metabolism and disposition of arsenic species after repeated oral dosing with sodium arsenite in drinking water. II. Measurements in pregnant and fetal CD-1 mice.

Arsenic is ubiquitous in the earth's crust, and human diseases are linked with exposures that are similar to dietary intake estimates. Metabolic methylation of inorganic arsenic facilitates excretion of pentavalent metabolites and decreases acute toxicity; however, tissue binding of trivalent arsenic intermediates is evidence for concomitant metabolic activation. Pregnant and fetal CD-1 mice comprise a key animal model for arsenic carcinogenesis since adult-only exposures have minimal effects. This study evaluated inorganic arsenic and its metabolites in pentavalent and trivalent states in blood and tissues from maternal and fetal CD-1 mice after repeated administration of arsenite through drinking water. After 8 days of exposure, DMA species were ubiquitous in dams and fetuses. Despite the presence of MMAIII in dams, none was observed in any fetal sample. This difference may be important in assessing fetal susceptibility to arsenic toxicity because MMA production has been linked with human disease. Binding of DMAIII in fetal tissues provided evidence for metabolic activation, although the role for such binding in arsenic toxicity is unclear. This study provides links between administered dose, metabolism, and internal exposures from a key animal model of arsenic toxicity to better understand risks from human exposure to environmental arsenic.

Remediation and cytotoxicity study of polycyclic aromatic hydrocarbon-contaminated marine sediments using synthesized iron oxide-carbon composite.

The study developed a new and cost-effective method for the remediation of marine sediments contaminated with polycyclic aromatic hydrocarbons (PAHs). Iron oxide (Fe3O4) nanoparticles were synthesized as the active component, supported on carbon black (CB), to form a composite catalyst (Fe3O4-CB) by using a wet chemical method. The oxidation of 16 PAH contaminants present in marine sediments significantly activated sodium persulfate (Na2S2O8) to form sulfate free radicals (SO4-·); this was investigated in a slurry system. In addition, in vitro cytotoxic activity and oxidative stress studies were performed. The synthesized composite catalysts (Fe3O4-CB) were characterized using X-ray diffraction, Fourier transform infrared spectroscopy, a superconducting quantum interference device magnetometry, and environmental scanning electron microscopy. The efficiency of PAH removal was 39-63% for unactivated persulfate (PS) from an initial dose of 1.7 × 10-7-1.7 × 10-2 M. The removal of PAHs was evaluated using Fe3O4/PS, CB/PS, and Fe3O4/PS and found to be 75, 64, and 86%, respectively, at a temperature of 303 K, PS concentration of 1.7 × 10-5 M, and pH of 6.0. An MTT assay was used to assess the cytotoxicity of the composite catalyst at five concentrations (25, 50, 100, 200, and 400 µg/mL) on human hepatoma carcinoma (HepG2) cells for 24 h. This revealed a dose-dependent decrease in cell viability. A dichlorofluorescein diacetate assay was performed to evaluate the generation of reactive oxygen species, which principally originated from the ferrous ions of the composite catalyst.

Synergistic therapy of chemotherapeutic drugs and MTH1 inhibitors using a pH-sensitive polymeric delivery system for oral squamous cell carcinoma.

MutT homolog 1 (MTH1) is an essential sanitizer of the free nucleotide pool that prevents lethal DNA damage in cancer cells, which has been validated as an anticancer target in recent years. Small molecule TH287 potently and selectively inhibits the MTH1 protein in cells. Here, we developed an effective chemotherapeutic system for oral squamous cell carcinoma (OSCC) based on polymeric nanoparticles that achieve co-delivery of anticancer drug sodium arsenite (NaAsO2) and MTH1 inhibitor TH287. Cationic hyperbranched poly(amine-ester) (HPAE), an amphiphilic and pH-sensitive polymer with a highly branched structure, self-assembled into nanoparticles in aqueous solution. Both NaAsO2 and TH287 could be loaded into HPAE nanoparticles with the help of electrostatic attraction and hydrophobic interaction. The release of NaAsO2 and TH287 from HPAE(NaAsO2 + TH287) nanoparticles was pH-dependent. In vitro evaluation demonstrated that the HPAE(NaAsO2 + TH287) nanoparticles rapidly entered cancer cells and released NaAsO2 and TH287 in response to acidic intracellular environments. In comparison with NaAsO2, TH287, HPAE(NaAsO2) nanoparticles, HPAE(TH287) nanoparticles, and the physical mixture of HPAE(NaAsO2) nanoparticles and TH287, the HPAE(NaAsO2 + TH287) nanoparticles exhibited more effective inhibition of tumor cell proliferation, illustrating the synergistic effect of NaAsO2 and TH287. The experimental results show that TH287 is likely to inhibit MTH1 in tumor cells, rendering them more sensitive to NaAsO2.

Polysulfide Na2S4 regulates the activation of PTEN/Akt/CREB signaling and cytotoxicity mediated by 1,4-naphthoquinone through formation of sulfur adducts.

Electrophiles can activate redox signal transduction pathways, through actions of effector molecules (e.g., kinases and transcription factors) and sensor proteins with low pKa thiols that are covalently modified. In this study, we investigated whether 1,4-naphthoquinone (1,4-NQ) could affect the phosphatase and tensin homolog (PTEN)-Akt signaling pathway and persulfides/polysulfides could modulate this adaptive response. Simultaneous exposure of primary mouse hepatocytes to Na2S4 and 1,4-NQ markedly decreased 1,4-NQ-mediated cell death and S-arylation of cellular proteins. Modification of cellular PTEN during exposure to 1,4-NQ was also blocked in the presence of Na2S4. 1,4-NQ, at up to 10 µM, increased phosphorylation of Akt and cAMP response element binding protein (CREB). However, at higher concentrations, 1,4-NQ inhibited phosphorylation of both proteins. These bell-shaped dose curves for Akt and CREB activation were right-shifted in cells treated with both 1,4-NQ and Na2S4. Incubation of 1,4-NQ with Na2S4 resulted in formation of 1,4-NQ-S-1,4-NQ-OH. Unlike 1,4-NQ, authentic 1,4-NQ-S-1,4-NQ-OH adduct had no cytotoxicity, covalent binding capability nor ability to activate PTEN-Akt signaling in cells. Our results suggested that polysulfides, such as Na2S4, can increase the threshold of 1,4-NQ for activating PTEN-Akt signaling and cytotoxicity by capturing this electrophile to form its sulfur adducts.

Mechanical properties of polymer-infiltrated-ceramic (sodium aluminum silicate) composites for dental restoration.

OBJECTIVE: To fabricate indirect restorative composites for CAD/CAM applications and evaluate the mechanical properties. METHODS: Polymer-infiltrated-ceramic composites were prepared through infiltrating polymer into partially sintered sodium aluminum silicate ceramic blocks and curing. The corresponding samples were fabricated according to standard ISO-4049 using for mechanical properties measurement. The flexural strength and fracture toughness were measured using a mechanical property testing machine. The Vickers hardness and elastic modulus were calculated from the results of nano-indentation. The microstructures were investigated using secondary electron detector. The density of the porous ceramic blocks was obtained through TG-DTA. The conversion degrees were calculated from the results of mid-infrared spectroscopy. RESULTS: The obtained polymer infiltrated composites have a maximum flexural strength value of 214±6.5MPa, Vickers hardness of 1.76-2.30GPa, elastic modulus of 22.63-27.31GPa, fracture toughness of 1.76-2.35MPam1/2 and brittleness index of 0.75-1.32µm-1/2. These results were compared with those of commercial CAD/CAM blocks. Our results suggest that these materials with good mechanical properties are comparable to two commercial CAD/CAM blocks. CONCLUSION: The sintering temperature could dramatically influence the mechanical properties. CLINICAL SIGNIFICANCE: Restorative composites with superior mechanical properties were produced. These materials mimic the properties of natural dentin and could be a promising candidate for CAD/CAM applications.

Enhanced decolorization of methyl orange in aqueous solution using iron-carbon micro-electrolysis activation of sodium persulfate.

Reactivity of sodium persulfate (PS) in the decolorization of methyl orange (MO) in aqueous solution using an iron-carbon micro-electrolysis (ICE) method was investigated. The effects of sodium persulfate doses, pH, Fe-to-C mass ratios, initial MO concentration as well as the reaction temperature were comprehensively studied in batch experiments. The ICE-PS coupled process was more suitable for wide ranges of pH, initial MO concentration and reaction temperature, accompanied by the reduction of Fe compared ICE. The MO removal efficiency improved substantially by ICE-PS technique, 76.03% for ICE and 91.27% for ICE-PS at experimental conditions of pH 3.0, Fe-to-C mass ratio 3:1, PS addition 10 mM and initial MO concentration 0.61 mM. Furthermore, the biodegradability index (BI) dramatically increased from 0.26 to 0.65. The binary hydroxyl and sulfate radicals that non-selectively degrade MO to the derivatives with small molecules are ascribed to ICE-PS method as detected by the UV-vis spectra. The PS activation resource was Fe2+ through the hydroxyl radical quenching reaction by the additive tert-butanol (TBA). This study provides an in-depth theoretical understanding of the development and wide commercial application of the ICE technology to refractory industrial dye wastewater treatment.

Remediating 1,4-dioxane-contaminated water with slow-release persulfate and zerovalent iron.

1,4-dioxane is an emerging contaminant that was used as a corrosion inhibitor with chlorinated solvents. Metal-activated persulfate can degrade dioxane but reaction kinetics have typically been characterized by a rapid decrease during the first 30 min followed by either a slower decrease or no further change (i.e., plateau). Our objective was to identify the factors responsible for this plateau and then determine if slow-release formulations of sodium persulfate and Fe0 could provide a more sustainable degradation treatment. We accomplished this by conducting batch experiments where Fe0-activated persulfate was used to treat dioxane. Treatment variables included the timing at which the dioxane was added to the Fe0-persulfate reaction (T = 0 and 30 min) and including various products of the Fe0-persulfate reaction at T = 0 min (Fe2+, Fe3+, and SO42-). Results showed that when dioxane was spiked into the reaction at 30 min, no degradation occurred; this is in stark contrast to the 60% decrease observed when added at T = 0 min. Adding Fe2+ at the onset (T = 0 min) also severely halted the reaction and caused a plateau. This indicates that excess ferrous iron produced from the Fe0-persulfate reaction scavenges sulfate radicals and prevents further dioxane degradation. By limiting the release of Fe0 in a slow-release wax formulation, degradation plateaus were avoided and 100% removal of dioxane observed. By using 14C-labeled dioxane, we show that ∼40% of the dioxane carbon is mineralized within 6 d. These data support the use of slow-release persulfate and zerovalent iron to treat dioxane-contaminated water.

Post-treatment of palm oil mill effluent (POME) using combined persulphate with hydrogen peroxide (S2O82-/H2O2) oxidation.

The aim of the current study is to evaluate the effectiveness of combined persulphate with hydrogen peroxide (S2O82-/H2O2) oxidation as a post-treatment of biologically treated palm oil mill effluent (POME) for the first time in the literature. The removal efficiencies of chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N), and suspended solids (SS) were 36.8%, 47.6%, and 90.6%, respectively, by S2O82- oxidation alone under certain operation conditions (i.e., S2O82- = 0.82 g, pH 11, and contact time 20 min). Nevertheless, the combined process (S2O82-/H2O2) achieved 75.8% and 87.1% removals of NH3-N and SS, respectively, under 2.45/1.63 g/g H2O2/S2O82-, pH 11, and 20 min oxidation. Moreover, 56.9% of COD was removed at pH 8.4.