Tungstate removal from aqueous solution by nanocrystalline iowaite: An iron-bearing layered double hydroxide.

Tungstate enrichment in aquatic systems may cause negative environmental and health effects. This study addresses tungstate removal from aqueous solution by nanocrystalline iowaite, an iron-bearing layered double hydroxide, which has not been used for treatment of tungstate-rich waters so far. Tungstate sorption experiments were conducted with various contact times, temperatures, initial tungstate concentrations (0.001-2 mM), and solution pH values (2-13), the results indicating that iowaite sorbed aqueous tungstate effectively and quickly, and the sorption maximum can be up to 71.9 mg/g. Moreover, the tungsten sorption capacity keeps nearly constant at a wide pH range from 3 to 11. Duo to its pH buffering effect, the alkaline conditions were generated by the addition of iowaite, which are favorable for the removal of aqueous tungstate because the polymerization of tungstate can be prohibited at alkaline pH values. Zeta potential, XRD and XPS analyses were employed to clarify the sorption mechanisms, and it was concluded that tungstate was sorbed via its exchange with the chloride originally intercalated into iowaite interlayers as well as its stronger inner-sphere complexation with the Fe atoms located in iowaite layers. Nanocrystalline iowaite is suitable for treating both tungstate-bearing natural waters with moderately high tungstate concentrations and industrial wastewaters extremely rich in tungstate.

Tungstate adsorption onto Italian soils with different characteristics.

The study of tungsten in the environment is currently of considerable interest because of the growing concerns resulting from its possible toxicity and carcinogenicity. Adsorption reactions are some of the fundamental processes governing the fate and transport of tungsten compounds in soil. This paper reports data on the adsorption of tungstate ions in three different Italian soils, which are characteristic of the Mediterranean region. The results show that pH is the most important factor governing the adsorption of tungstate in these soils. The data interpreted according to the Langmuir equation show that the maximum value of adsorption is approximately 30 mmol kg-1 for the most acidic soil (pH = 4.50) and approximately 9 mmol kg-1 for the most basic soil (pH = 7.40). In addition, soil organic matter is shown to play a fundamental role in adsorption processes, which are favored in soils with a higher organic matter content. The data could contribute to a better understanding of the behavior of tungsten compounds in Italian soils for which current knowledge is very scarce, also in view of environmental regulations, which are currently lacking.

Tungstate (VI) sorption on hematite: An in situ ATR-FTIR probe on the mechanism.

Owing to the suspected toxicity and carcinogenicity of tungstate (VI) oxyanions [i.e. mono tungstate and several polytungstate, generally represented by W (VI)], the environmental fate of W (VI) has been widely studied. Sorption is regarded as a major mechanism by which W (VI) species are retained in the solid/water interface. Iron (hydr)oxides have been considered important environmental sinks for W (VI) species. Here we report sorption mechanisms of W (VI) on a common iron oxide mineral-hematite under environmentally relevant solution properties using in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopic probes. Initial W (VI) loadings varied from 10 to 200 µM at fixed pH values ranged from 4.6 to 8.1. For pH envelop (pHs = 4.6, 5.0, 5.5, 6.0, 6.5, 7.5, and 8.1) experiments, fixed W (VI) concentrations (i.e. 10 & 200 µM) were used to understand the effects of pH. The results indicated that at acidic pH values (pH < 6.0) the sorbed polytungstate surface species are prominent at 200 µM initial W (VI) conc. The pH envelop experiments revealed that sorbed polytungstates can be present even at lower initial W (VI) conc. (i.e. 10 µM) at pH values <5.5. Overall, our in situ ATR-FTIR experiments indicated that W (VI) forms inner-sphere type bonds on hematite surface and the strength of the interaction increases with decreasing pH. In addition, initial W (VI) concentration affected the sorption mechanisms of W (VI) on hematite. Our study will aid the molecular level understanding of W (VI) retention on iron oxide surfaces.

Elemental analysis of occupational and environmental lung diseases by electron probe microanalyzer with wavelength dispersive spectrometer.

Occupational and environmental lung diseases are a group of pulmonary disorders caused by inhalation of harmful particles, mists, vapors or gases. Mineralogical analysis is not generally required in the diagnosis of most cases of these diseases. Apart from minerals that are encountered rarely or only in specific occupations, small quantities of mineral dusts are present in the healthy lung. As such when mineralogical analysis is required, quantitative or semi-quantitative methods must be employed. An electron probe microanalyzer with wavelength dispersive spectrometer (EPMA-WDS) enables analysis of human lung tissue for deposits of elements by both qualitative and semi-quantitative methods. Since 1993, we have analyzed 162 cases of suspected occupational and environmental lung diseases using an EPMA-WDS. Our institute has been accepting online requests for elemental analysis of lung tissue samples by EPMA-WDS since January 2011. Hard metal lung disease is an occupational interstitial lung disease that primarily affects workers exposed to the dust of tungsten carbide. The characteristic pathological findings of the disease are giant cell interstitial pneumonia (GIP) with centrilobular fibrosis, surrounded by mild alveolitis with giant cells within the alveolar space. EPMA-WDS analysis of biopsied lung tissue from patients with GIP has demonstrated that tungsten and/or cobalt is distributed in the giant cells and centrilobular fibrosing lesion in GIP. Pneumoconiosis, caused by amorphous silica, and acute interstitial pneumonia, associated with the giant tsunami, were also elementally analyzed by EPMA-WDS. The results suggest that commonly found elements, such as silicon, aluminum, and iron, may cause occupational and environmental lung diseases.

The cupric ion reducing antioxidant capacity and polyphenolic content of some herbal teas.

The total antioxidant capacity of the aqueous extracts of some endemic herbs-prepared as infusions by steeping these herbs in hot water--was assayed with bis(neocuproine)copper(II) chloride, also known as the cupric ion reducing antioxidant capacity (CUPRAC) reagent, which was easily accessible, rapid, stable and responsive to both hydrophilic and lipophilic antioxidants. The highest antioxidant capacities of some herbal teas available in the Turkish market were observed for scarlet pimpernel (Anagallis arvensis), sweet basil (Ocimum basilicum), green tea (Camellia sinensis) and lemon balm (Melissa officinalis), in this order (1.63, 1.18, 1.07, and 0.99 mmol trolox equivalent (TR)/g, respectively). For infusions prepared from ready-to-use tea bags, the CUPRAC values were highest for Ceylon blended ordinary tea (4.41), green tea with lemon (1.61), English breakfast ordinary tea (1.26) and green tea (0.94), all of which were manufactured types of C. sinensis. Following the strongest antioxidant herbs with capacities close to or slightly exceeding 1.0 mmol TR/g, sage, thyme, coriander, coltsfoot, blackberry and immortelle (Helichrysum) exhibited capacities around 0.5 mmol TR/g. The correlation of the Folin total phenolic content of herbal teas with their CUPRAC and ABTS (2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt) total antioxidant capacities gave linear curves with correlation coefficients of 0.966 and 0.936, respectively, showing that the CUPRAC assay results better correlated with total phenolic content of herbal teas. Absorbance versus concentration data at different dilutions and upon standard additions of model antioxidant compounds (trolox and quercetin) to herbal tea infusions showed that the absorbances (at 450 nm of the CUPRAC method) due to different antioxidant compounds in herbal tea infusions were additive; that is, the tested antioxidants did not chemically interact to cause apparent deviations from Beer's law.

Recent developments in human biomonitoring: non-invasive assessment of target tissue dose and effects of pneumotoxic metals.

Tobacco smoke and polluted environments substantially increase the lung burden of pneumotoxic chemicals, particularly pneumotoxic metallic elements. To achieve a better understanding of the early events between exposure to inhaled toxicants and the onset of adverse effects on the lung, the characterization of dose at the target organ would be extremely useful. Exhaled breath condensate (EBC), obtained by cooling exhaled air under conditions of spontaneous breathing, is a novel technique that could provide a non-invasive assessment of pulmonary pathobiology. Considering that EBC is water practically free of interfering solutes, it represents an ideal biological matrix for elemental characterization. Published data show that several toxic metals and trace elements are detectable in EBC, raising the possibility of using this medium to quantify the lung tissue dose of pneumotoxic substances. This novel approach may represent a significant advance over the analysis of alternative media (blood, serum, urine, hair), which are not as reliable (owing to interfering substances in the complex matrix) and reflect systemic rather than lung (target tissue) levels of both toxic metals and essential trace elements. Data obtained among workers occupationally exposed to either hard metals or chromium (VI) and in smokers with or without chronic obstructive pulmonary disease (COPD) are reviewed to show that--together with biomarkers of exposure--EBC also allows the simultaneous quantification of biomarkers of effect directly sampled from the epithelial lining fluid, thus providing novel insights on both kinetic and dynamic aspects of metal toxicology.

Synthesis, characterization, and antitumoral activity of polyoxometalate loaded starch nanocomplexes.

Using a reverse-phase microemulsion polymerization method and an encapsulating method, polyoxometalates (POMs) K6SiW11TiO40 incorporating starch microspheres have been prepared and structurally characterized by elemental analyses, IR, UV-vis, and NMR spectroscopy. The size of SiW11TiO40/starch particles is about 40-60 nm. The polyoxometalate encapsulated by a starch microsphere retains the parent structure. The starch microsphere is a good carrier, as it is able to enhance the antitumoral activity of POMs and decrease the toxicity of POMs as well.

Hard metal lung disease--the first case in Singapore.

INTRODUCTION: We report the first case of hard metal lung disease in Singapore and the occupational investigative work and control measures that were undertaken. CLINICAL PICTURE: A 38-year-old machinist in the tool manufacturing industry presented with exertional dyspnoea and cough. Chest X-ray revealed bilateral reticulonodular infiltrates with honeycombing. High resolution computed tomography scan of the thorax confirmed the presence of interstitial fibrosis. Open biopsy of the lung showed features of pneumoconiosis. Particle induced X-ray emission (PIXE) analysis, a relatively new elemental analysis technique, performed on the lung biopsy specimen confirmed the presence of tungsten and titanium; and he was diagnosed to have hard metal lung disease. Microbiologic, serologic and histologic investigations excluded an infective cause. Serial pulmonary function tests on follow-up showed no progression. He presented with haemoptysis 10 months later and was diagnosed to have tuberculosis on the basis of positive sputum and bronchoalveolar lavage cultures for Mycobacterium tuberculosis complex. TREATMENT: Preventive measures and permanent transfer to non-cobalt work were instituted. OUTCOME: The interstitial fibrosis appears to have stabilised. CONCLUSION: The diagnosis of hard metal lung disease must be considered in a worker exposed to cobalt presenting with interstitial fibrosis.

Multi-element follow up in biological specimens of hard metal pneumoconiosis.

The movement of Co and the other components of the hard metal in the body fluids, their solubility, their links to the cells and proteins of the body, and their clearance are largely unknown. The first aim of this work is to evaluate whether Neutron Activation Analysis (NAA), a new analytical technique based on the radiochemical separation of samples irradiated in a Nuclear Reactor, may be suitable for studying the movement of elements in tissues or body fluids of workers over time. We have investigated seven hard metal workers, all employed in the grinding process, with NAA studies (single study in two, follow-up in five) of 29 elements on lung tissue, BAL fluid, blood, urine, pubic hair, toenails and sperm. In three, the diagnosis of hard metal pneumoconiosis was easy; in the other four, due to evident bilateral hilar lymphadenopathy, it was difficult to distinguish between pneumoconiosis and sarcoidosis stage II, and the final diagnosis, after pulmonary biopsy, was hard metal pneumoconiosis in three, and sarcoidosis in one. In spite of high potential, NAA gives a number of unexpected results, with apparent controversies and no clear relationship in the evolution of levels of Co, W and Ta: there is no simple explanation for such apparent inconsistencies at present, so that the study of the movement of elements in body fluid sometimes appears disappointing with this technique. Other observations were noted from the data available: 1) the concentration of elements (Co, Ta, W) in lung tissue is far higher than in BAL fluid, but the factor is so variable that BAL fluid cannot be taken as representative of the concentration of elements in lung tissue. 2) High concentrations in tissues or body fluids are indicative for exposure, but not for disease. In the light of available data, there are no levels above which development of disease is inevitable. 3) When the problem is to distinguish between sarcoidosis and pneumoconiosis in exposed subjects, the concentration of elements is of no value, and the pulmonary biopsy is still necessary. However a NAA study may be helpful to confirm the presence of the offending agent, and to avoid pulmonary biopsy in cases where the occupational history is unclear.