CrossDome: an interactive R package to predict cross-reactivity risk using immunopeptidomics databases.

T-cell-based immunotherapies hold tremendous potential in the fight against cancer, thanks to their capacity to specifically targeting diseased cells. Nevertheless, this potential has been tempered with safety concerns regarding the possible recognition of unknown off-targets displayed by healthy cells. In a notorious example, engineered T-cells specific to MAGEA3 (EVDPIGHLY) also recognized a TITIN-derived peptide (ESDPIVAQY) expressed by cardiac cells, inducing lethal damage in melanoma patients. Such off-target toxicity has been related to T-cell cross-reactivity induced by molecular mimicry. In this context, there is growing interest in developing the means to avoid off-target toxicity, and to provide safer immunotherapy products. To this end, we present CrossDome, a multi-omics suite to predict the off-target toxicity risk of T-cell-based immunotherapies. Our suite provides two alternative protocols, i) a peptide-centered prediction, or ii) a TCR-centered prediction. As proof-of-principle, we evaluate our approach using 16 well-known cross-reactivity cases involving cancer-associated antigens. With CrossDome, the TITIN-derived peptide was predicted at the 99+ percentile rank among 36,000 scored candidates (p-value < 0.001). In addition, off-targets for all the 16 known cases were predicted within the top ranges of relatedness score on a Monte Carlo simulation with over 5 million putative peptide pairs, allowing us to determine a cut-off p-value for off-target toxicity risk. We also implemented a penalty system based on TCR hotspots, named contact map (CM). This TCR-centered approach improved upon the peptide-centered prediction on the MAGEA3-TITIN screening (e.g., from 27th to 6th, out of 36,000 ranked peptides). Next, we used an extended dataset of experimentally-determined cross-reactive peptides to evaluate alternative CrossDome protocols. The level of enrichment of validated cases among top 50 best-scored peptides was 63% for the peptide-centered protocol, and up to 82% for the TCR-centered protocol. Finally, we performed functional characterization of top ranking candidates, by integrating expression data, HLA binding, and immunogenicity predictions. CrossDome was designed as an R package for easy integration with antigen discovery pipelines, and an interactive web interface for users without coding experience. CrossDome is under active development, and it is available at https://github.com/AntunesLab/crossdome.

Interdomain Linker Effect on the Mechanical Stability of Ig Domains in Titin.

Titin is the largest protein in humans, composed of more than one hundred immunoglobulin (Ig) domains, and plays a critical role in muscle's passive elasticity. Thus, the molecular design of this giant polyprotein is responsible for its mechanical function. Interestingly, most of these Ig domains are connected directly with very few interdomain residues/linker, which suggests such a design is necessary for its mechanical stability. To understand this design, we chose six representative Ig domains in titin and added nine glycine residues (9G) as an artificial interdomain linker between these Ig domains. We measured their mechanical stabilities using atomic force microscopy-based single-molecule force spectroscopy (AFM-SMFS) and compared them to the natural sequence. The AFM results showed that the linker affected the mechanical stability of Ig domains. The linker mostly reduces its mechanical stability to a moderate extent, but the opposite situation can happen. Thus, this effect is very complex and may depend on each particular domain's property.

Measuring biological materials mechanics with atomic force microscopy - Mechanical unfolding of biopolymers.

Biopolymers, such as polynucleotides, polypeptides and polysaccharides, are macromolecules that direct most of the functions in living beings. Studying the mechanical unfolding of biopolymers provides important information about their molecular elasticity and mechanical stability, as well as their energy landscape, which is especially important in proteins, since their three-dimensional structure is essential for their correct activity. In this primer, we present how to study the mechanical properties of proteins with atomic force microscopy and how to obtain information about their stability and energetic landscape. In particular, we discuss the preparation of polyprotein constructs suitable for AFM single molecule force spectroscopy (SMFS), describe the parameters used in our force-extension SMFS experiments and the models and equations employed in the analysis of the data. As a practical example, we show the effect of the temperature on the unfolding force, the distance to the transition state, the unfolding rate at zero force, the height of the transition state barrier, and the spring constant of the protein for a construct containing nine repeats of the I27 domain from the muscle protein titin. HIGHLIGHTS: 1. Atomic force microscopy (AFM) can be used to study the mechanical unfolding of polymers. 2. AFM provides a direct measurement of unfolding (unbinding) forces. 3. Force measurements for different rates provide information about the distance to the transition state and the unfolding rate at zero force.

Basal oxidation of conserved cysteines modulates cardiac titin stiffness and dynamics.

Titin, as the main protein responsible for the passive stiffness of the sarcomere, plays a key role in diastolic function and is a determinant factor in the etiology of heart disease. Titin stiffness depends on unfolding and folding transitions of immunoglobulin-like (Ig) domains of the I-band, and recent studies have shown that oxidative modifications of cryptic cysteines belonging to these Ig domains modulate their mechanical properties in vitro. However, the relevance of this mode of titin mechanical modulation in vivo remains largely unknown. Here, we describe the high evolutionary conservation of titin mechanical cysteines and show that they are remarkably oxidized in murine cardiac tissue. Mass spectrometry analyses indicate a similar landscape of basal oxidation in murine and human myocardium. Monte Carlo simulations illustrate how disulfides and S-thiolations on these cysteines increase the dynamics of the protein at physiological forces, while enabling load- and isoform-dependent regulation of titin stiffness. Our results demonstrate the role of conserved cysteines in the modulation of titin mechanical properties in vivo and point to potential redox-based pathomechanisms in heart disease.

Functional impact of titin (TTN) mutations in ocular surface squamous neoplasia.

Mutations in the titin (TTN) gene are among the most common genomic aberrations in ocular surface squamous neoplasia (OSSN), the most common cancer of the external eye. Further, TTN mutations are associated with resistance to standard therapy with topical interferon alpha-2b (IFN-α2b). However, it remains unclear how TTN mutations drive OSSN pathogenesis and treatment resistance. TTN encodes the largest protein in the human body and its best understood function is as a myofibril scaffold in striated muscle. However, recent evidence indicates that TTN has additional functions in non-muscle cells and in cancer. Here, we performed a disorder-based bioinformatics analysis which revealed that intrinsically disordered protein regions are abundant in TTN and provide mechanistic insights into its function as a nuclear protein in epithelial cells. Specific mutations found in OSSN are predicted to affect its intrinsically disordered protein regions (IDPRs), promoting chromosomal instability, oncogenesis, and altered response to IFN-α2b treatment.

Amyloid Aggregates of Smooth-Muscle Titin Impair Cell Adhesion.

Various amyloid aggregates, in particular, aggregates of amyloid ß-proteins, demonstrate in vitro and in vivo cytotoxic effects associated with impairment of cell adhesion. We investigated the effect of amyloid aggregates of smooth-muscle titin on smooth-muscle-cell cultures. The aggregates were shown to impair cell adhesion, which was accompanied by disorganization of the actin cytoskeleton, formation of filopodia, lamellipodia, and stress fibers. Cells died after a 72-h contact with the amyloid aggregates. To understand the causes of impairment, we studied the effect of the microtopology of a titin-amyloid-aggregate-coated surface on fibroblast adhesion by atomic force microscopy. The calculated surface roughness values varied from 2.7 to 4.9 nm, which can be a cause of highly antiadhesive properties of this surface. As all amyloids have the similar structure and properties, it is quite likely that the antiadhesive effect is also intrinsic to amyloid aggregates of other proteins. These results are important for understanding the mechanisms of the negative effect of amyloids on cell adhesion.

Interdomain linkers tailor the stability of immunoglobulin repeats in polyproteins.

Linkers in polyproteins are considered as mere spacers between two adjacent domains. However, a series of studies using single-molecule force spectroscopy have recently reported distinct thermodynamic stability of I27 in polyproteins with varying linkers and indicated the vital role of linkers in domain stability. A flexible glycine rich linker (-(GGG)n, n ≥ 3) featured unfolding at lower forces than the regularly used arg-ser (RS) based linker. Interdomain interactions among I27 domains in Gly-rich linkers were suggested to lead to reduced domain stability. However, the negative impact of inter domain interactions on domain stability is thermodynamically counter-intuitive and demanded thorough investigations. Here, using an array of ensemble equilibrium experiments and in-silico measurements with I27 singlet and doublets with two aforementioned linkers, we delineate that the inter-domain interactions in fact raise the stability of the polyprotein with RS linker. More surprisingly, a highly flexible Gly-rich linker has no interference on the stability of polyprotein. Overall, we conclude that flexible linkers are preferred in a polyprotein for maintaining domain's independence.

Exploiting a Mechanical Perturbation of a Titin Domain to Identify How Force Field Parameterization Affects Protein Refolding Pathways.

Molecular mechanics force fields have been shown to differ in their predictions of biomolecular processes such as protein folding. To test how force field differences affect predicted polypeptide behavior, we created a mechanically perturbed model of the ß-stranded I91 titin domain based on atomic force spectroscopy data and examined its refolding behavior using six different force fields. We found that different force fields varied significantly in their ability to refold the mechanically perturbed I91 domain. Examination of the perturbed I91 unfolded state revealed that all five Amber force fields oversample a specific region of the Ramachandran plot, thereby creating unfolded state intermediates which are not predicted by the Charmm 22* force field. Simulations of perturbed I91 refolding with Amber FB15 revealed that Amber FB15 destabilizes stable portions of I91, thereby contradicting experimental stability analyses. Finally, inspection of the perturbed I91 unfolded state along with equilibration simulations of the Ac-(AAQAA)3-NH2 peptide suggest that high dihedral torsional barriers cause the Amber ff14SB force field to predict higher helical lifetimes relative to other force fields. These results suggest that using mechanically perturbed models can provide a controlled method to gain insights into how force fields affect polypeptide behavior.

A HaloTag-TEV genetic cassette for mechanical phenotyping of proteins from tissues.

Single-molecule methods using recombinant proteins have generated transformative hypotheses on how mechanical forces are generated and sensed in biological tissues. However, testing these mechanical hypotheses on proteins in their natural environment remains inaccesible to conventional tools. To address this limitation, here we demonstrate a mouse model carrying a HaloTag-TEV insertion in the protein titin, the main determinant of myocyte stiffness. Using our system, we specifically sever titin by digestion with TEV protease, and find that the response of muscle fibers to length changes requires mechanical transduction through titin's intact polypeptide chain. In addition, HaloTag-based covalent tethering enables examination of titin dynamics under force using magnetic tweezers. At pulling forces < 10 pN, titin domains are recruited to the unfolded state, and produce 41.5 zJ mechanical work during refolding. Insertion of the HaloTag-TEV cassette in mechanical proteins opens opportunities to explore the molecular basis of cellular force generation, mechanosensing and mechanotransduction.

Supramolecular and Liquid Crystalline Contributions to the Assembly of Myofibril.

We compare steps observed during the fibrillogenesis of myofibrils with the sequence of steps predictable by a recent analysis of the structurization and functioning of striated muscles. The predicted assembly steps are based solely on fundamental equilibrium processes, particularly supramolecular interactions and liquid crystalline alignment of the rigid thick and thin filaments hosted within the sarcomer. Satisfactory agreement is obtained between several of the observed and the predicted fibrillogenesis steps. In several cases, however, the actual steps appear to be more complex than expected, evidencing the occurrence of transport and kinetic pathways that may assist the attainment of the equilibrium structure. The memory of the order of a precursor mesophase is imprinted during the remodeling of the surfaces at which the two sets of filaments are anchored. The relevance of the present analysis to the functioning of the myofibril is considered.

Study of the complement activation by amyloid aggregates of smooth muscle titin in vitro.

The giant muscle protein, titin, is the third most abundant protein in muscle (after myosin and actin). It was shown previously that smooth muscle titin (SMT) with a molecular mass of 500 kDa can form in vitro amorphous amyloid aggregates in two conditions: in solution of low ionic strength (0.15 M Glycine-KOH, pH 7.0) (SMT(Gly) aggregates) and in solution with ionic strength in the physiological range (0.2 M KCl, 20 mM imidazole, pH 7.2-7.4) (SMT(KCl) aggregates). Such aggregation in vivo, which may play a pathological or functional role, is not excluded. In view of the fact that some pathological amyloids can activate the classical and alternative pathways of complement system, we investigated the binding of complement component C1q and C3b to smooth muscle titin amyloid aggregates. The binding of С1q and C3b to SMT aggregates was not observed with ELISA assay. Since SMT aggregates do not activate the complement system, they are hardly implicated in the inflammatory process caused by muscle damage in amyloidoses.Abbreviations: SMT: smooth muscle titin; SMT(KCl) aggregates: SMT aggregates in solution containing 0.2 M KCl, 10 mM imidazole, pH 7.0; SMT(Gly) aggregates: SMT aggregates in solution containing 0.15 M glycine-KOH, pH 7.2-7.4; MAC: membrane attack complex; DLS: dynamic light scattering; NHS: Normal Human Serum.

Structural diversity in the atomic resolution 3D fingerprint of the titin M-band segment.

In striated muscles, molecular filaments are largely composed of long protein chains with extensive arrays of identically folded domains, referred to as "beads-on-a-string". It remains a largely unresolved question how these domains have developed a unique molecular profile such that each carries out a distinct function without false-positive readout. This study focuses on the M-band segment of the sarcomeric protein titin, which comprises ten identically folded immunoglobulin domains. Comparative analysis of high-resolution structures of six of these domains ‒ M1, M3, M4, M5, M7, and M10 ‒ reveals considerable structural diversity within three distinct loops and a non-conserved pattern of exposed cysteines. Our data allow to structurally interpreting distinct pathological readouts that result from titinopathy-associated variants. Our findings support general principles that could be used to identify individual structural/functional profiles of hundreds of identically folded protein domains within the sarcomere and other densely crowded cellular environments.

Current Understanding of Residual Force Enhancement: Cross-Bridge Component and Non-Cross-Bridge Component.

Muscle contraction is initiated by the interaction between actin and myosin filaments. The sliding of actin filaments relative to myosin filaments is produced by cross-bridge cycling, which is governed by the theoretical framework of the cross-bridge theory. The cross-bridge theory explains well a number of mechanical responses, such as isometric and concentric contractions. However, some experimental observations cannot be explained with the cross-bridge theory; for example, the increased isometric force after eccentric contractions. The steady-state, isometric force after an eccentric contraction is greater than that attained in a purely isometric contraction at the same muscle length and same activation level. This well-acknowledged and universally observed property is referred to as residual force enhancement (rFE). Since rFE cannot be explained by the cross-bridge theory, alternative mechanisms for explaining this force response have been proposed. In this review, we introduce the basic concepts of sarcomere length non-uniformity and titin elasticity, which are the primary candidates that have been used for explaining rFE, and discuss unresolved problems regarding these mechanisms, and how to proceed with future experiments in this exciting area of research.

Titin splicing regulates cardiotoxicity associated with calpain 3 gene therapy for limb-girdle muscular dystrophy type 2A.

Limb-girdle muscular dystrophy type 2A (LGMD2A or LGMDR1) is a neuromuscular disorder caused by mutations in the calpain 3 gene (CAPN3). Previous experiments using adeno-associated viral (AAV) vector-mediated calpain 3 gene transfer in mice indicated cardiac toxicity associated with the ectopic expression of the calpain 3 transgene. Here, we performed a preliminary dose study in a severe double-knockout mouse model deficient in calpain 3 and dysferlin. We evaluated safety and biodistribution of AAV9-desmin-hCAPN3 vector administration to nonhuman primates (NHPs) with a dose of 3 × 1013 viral genomes/kg. Vector administration did not lead to observable adverse effects or to detectable toxicity in NHP. Of note, the transgene expression did not produce any abnormal changes in cardiac morphology or function of injected animals while reaching therapeutic expression in skeletal muscle. Additional investigation on the underlying causes of cardiac toxicity observed after gene transfer in mice and the role of titin in this phenomenon suggest species-specific titin splicing. Mice have a reduced capacity for buffering calpain 3 activity compared to NHPs and humans. Our studies highlight a complex interplay between calpain 3 and titin binding sites and demonstrate an effective and safe profile for systemic calpain 3 vector delivery in NHP, providing critical support for the clinical potential of calpain 3 gene therapy in humans.

Biomimetic Pulsating Vesicles with Both pH-Tunable Membrane Permeability and Light-Triggered Disassembly-Re-assembly Behaviors Prepared by Supra-Amphiphilic Helices.

The reversible unfolding-refolding transition is considerably important for natural elastomeric proteins (e.g., titin) to fulfill their biological functions. It is of great importance to develop synthetic versions by borrowing their unique stretchable design principles. Herein, we present a novel pulsating vesicle by means of the aqueous self-assembly of supra-amphiphilic helices. Interestingly, this vesicle simultaneously features dynamic swelling and shrinkage movements in response to external proton triggers. Titin-like unfolding-refolding transformation of artificial helices was proved to play a crucial role in this pulsatile motion. Moreover, the vesicular membrane of this vesicle has exhibited tunable permeability during reversible expansion and contraction circulation. Meanwhile, light can also be used as a driving force to further regulate the disassembly-reassembly transformation of the pulsating vesicle. In addition, the drug delivery system was also employed as an investigating model to estimate the permeability variation and disassembly-reassembly behaviors of the pulsating vesicles, which displayed unique dual quick- and sustained-release behaviors toward anti-cancer agents. It is anticipated that this work opens an avenue for fabricating novel stretchable biomimetics by using the exclusive unfolding-refolding nature of artificial foldamers.

The Mechanical Power of Titin Folding.

The delivery of mechanical power, a crucial component of animal motion, is constrained by the universal compromise between the force and the velocity of its constituent molecular systems. While the mechanisms of force generation have been studied at the single molecular motor level, there is little understanding of the magnitude of power that can be generated by folding proteins. Here, we use single-molecule force spectroscopy techniques to measure the force-velocity relation of folding titin domains that contain single internal disulfide bonds, a common feature throughout the titin I-band. We find that formation of the disulfide regulates the peak power output of protein folding in an all-or-none manner, providing at 6.0 pN, for example, a boost from 0 to 6,000 zW upon oxidation. This mechanism of power generation from protein folding is of great importance for muscle, where titin domains may unfold and refold with each extension and contraction of the sarcomere.

Stiffness of hip adductor myofibrils is decreased in children with spastic cerebral palsy.

Cerebral palsy (CP) is the result of a static brain lesion which causes spasticity and muscle contracture. The source of the increased passive stiffness in patients is not understood and while whole muscle down to single muscle fibres have been investigated, the smallest functional unit of muscle (the sarcomere) has not been. Muscle biopsies (adductor longus and gracilis) from pediatric patients were obtained (CP n = 9 and control n = 2) and analyzed for mechanical stiffness, in-vivo sarcomere length and titin isoforms. Adductor longus muscle was the focus of this study and the results for sarcomere length showed a significant increase in length for CP (3.6 µm) compared to controls (2.6 µm). Passive stress at the same sarcomere length for CP compared to control was significantly lower in CP and the elastic modulus for the physiological range of muscle was lower in CP compared to control (98.2 kPa and 166.1 kPa, respectively). Our results show that CP muscle at its most reduced level (the myofibril) is more compliant compared to normal, which is completely opposite to what is observed at higher structural levels (single fibres, muscle fibre bundles and whole muscle). It is noteworthy that at the in vivo sarcomere length in CP, the passive forces are greater than normal, purely as a functional of these more compliant sarcomeres operating at long lengths. Titin isoforms were not different between CP and non-CP adductor longus but titin:nebulin was reduced in CP muscle, which may be due to titin loss or an over-expression of nebulin in CP muscles.

Conformational entropy of a single peptide controlled under force governs protease recognition and catalysis.

An immense repertoire of protein chemical modifications catalyzed by enzymes is available as proteomics data. Quantifying the impact of the conformational dynamics of the modified peptide remains challenging to understand the decisive kinetics and amino acid sequence specificity of these enzymatic reactions in vivo, because the target peptide must be disordered to accommodate the specific enzyme-binding site. Here, we were able to control the conformation of a single-molecule peptide chain by applying mechanical force to activate and monitor its specific cleavage by a model protease. We found that the conformational entropy impacts the reaction in two distinct ways. First, the flexibility and accessibility of the substrate peptide greatly increase upon mechanical unfolding. Second, the conformational sampling of the disordered peptide drives the specific recognition, revealing force-dependent reaction kinetics. These results support a mechanism of peptide recognition based on conformational selection from an ensemble that we were able to quantify with a torsional free-energy model. Our approach can be used to predict how entropy affects site-specific modifications of proteins and prompts conformational and mechanical selectivity.

Truncations of the titin Z-disc predispose to a heart failure with preserved ejection phenotype in the context of pressure overload.

Titin (TTN) Truncating variants (TTNtv) in the A-band of TTN predispose the mouse heart to systolic dysfunction when subjected to pressure-loading. However, the effects of TTNtv of the Z-disc are largely unexplored. A rat model of pressure-loaded heart is developed by trans-aortic constriction (TAC). Rats with TTNtv of the Z-disc were randomly assigned to TAC (Z-TAC) or sham-surgery (Z-Sham) and wildtype (WT) littermates served as controls (WT-TAC or WT-Sham). Left ventricular (LV) function was assessed by echocardiography. Pressure volume (PV) loops, histology and molecular profiling were performed eight months after surgery. Pressure-load by TAC increased LV mass in all cases when compared with Sham animals. Notably, systolic function was preserved in TAC animals throughout the study period, which was confirmed by terminal PV loops. Diastolic function was impaired in Z-disc TTNtv rats at baseline as compared to WT and became impaired further after TAC (dp/dtmin, mmHg/s): Z-TAC = -3435±763, WT-TAC = -6497±1299 (p<0.01). Z-TAC animals had greater cardiac fibrosis, with elevated collagen content and decreased vascular density as compared to WT-TAC animals associated with enhanced apoptosis of myocyte and non-myocyte populations. In the context of pressure overload, Z-disc TTNtv is associated with cardiac fibrosis, diastolic dysfunction, and capillary rarefaction in the absence of overt systolic dysfunction.

Topology of interaction between titin and myosin thick filaments.

Titin is a giant protein spanning between the Z- and M-lines of the sarcomere. In the A-band titin is associated with the myosin thick filament. It has been speculated that titin may serve as a blueprint for thick-filament formation due to the super-repeat structure of its A-band domains. Accordingly, titin might provide a template that determines the length and structural periodicity of the thick filament. Here we tested the titin ruler hypothesis by mixing titin and myosin at in situ stoichiometric ratios (300 myosins per 12 titins) in buffers of different ionic strength (KCl concentration range 100-300 mM). The topology of the filamentous complexes was investigated with atomic force microscopy. We found that the samples contained distinct, segregated populations of titin molecules and myosin thick filaments. We were unable to identify complexes in which myosin molecules were regularly associated to either mono- or oligomeric titin in either relaxed or stretched states of the titin filaments. Thus, the electrostatically driven self-association is stronger in both myosin and titin than their binding to each other, and it is unlikely that titin functions as a geometrical template for thick-filament formation. However, when allowed to equilibrate configurationally, long myosin thick filaments appeared with titin oligomers attached to their surface. The titin meshwork formed on the thick-filament surface may play a role in controlling thick-filament length by regulating the structural dynamics of myosin molecules and placing a mechanical limit on the filament length.