Factors associated with furcation involvement and fixed prostheses: A cross-sectional study.

OBJECTIVE: The study aims to explore the relationship between horizontal and vertical furcation involvement (FI) in teeth with or without a single unit fixed prosthesis (FP). MATERIALS AND METHODS: Adult subjects presenting to the periodontics department requiring cone beam computed tomography (CBCT) analysis were recruited for this study. 79 patients, with a total of 200 teeth, were split into two groups based on the presence or absence of FP within the same patient. Our analysis considered patient-level factors like smoking, diabetes, and periodontal severity and tooth-level factors including root trunk length (RTL), probing depth (PD), periodontal supracrestal tissue height (STH), supracrestal tissue attachment (STH-PD), interproximal bone distance (IPBD) to the cementoenamel junction (CEJ) (control) or crown margin (Test), and the distance from the furcation to the CEJ (control) or crown margin (Test). Subsequently, we developed a predictive model for FI. RESULTS: The presence of a prosthesis had a significant association with FI, with an odds ratio (OR) of 12.8 (p < 0.001). Other factors significantly correlated with FI were periodontitis (OR = 10.9; p = 0.006), buccal furcation site (OR = 5.70; p < 0.001), and PD (OR = 1.90; p = 0.027). FP placement increased IPBD by 1.08 mm (p < 0.001). The predictive model built for FI demonstrated a sensitivity of 92.9% and a specificity of 66.7%. CONCLUSIONS: Fixed prosthesis significantly influenced FI only in periodontitis patients. Factors such as periodontitis Stage, probing depth, and buccal site contribute to FI. The high sensitivity of the predictive model highlights the importance of considering these correlations during treatment planning. CLINICAL RELEVANCE: Comprehending FI factors is vital for devising customised treatment plans to halt disease progression and enhance outcomes of periodontal regenerative therapies.

The effect of different spatial resolutions and enhancement filters on radiographic detection of simulated furcation defects with intraoral digital radiography.

OBJECTIVE: The objective of this study was to evaluate the effects of spatial resolution and the application of enhancement filters in the diagnosis of simulated furcation defects and image quality with intraoral radiographs. STUDY DESIGN: Periapical images were acquired with photostimulable phosphor plates of molars in dry skulls (n = 8) and mandibles (n = 10) with 4 stages of furcation defect simulation. The plates were scanned in fast scan and high resolution modes to produce different spatial resolutions. Four image filters were applied. Six observers scored the detection of furcation defects. Mean values of area under the curve in receiver operating characteristic evaluation, accuracy, sensitivity, and specificity were calculated. Mean gray value (brightness), noise, and contrast-to-noise ratio (CNR) were calculated for enamel, dentin, and alveolar bone to evaluate image quality. Analysis of variance compared the values between the different spatial resolutions and filters. The significance of difference was established at P < .05. RESULTS: There were no significant differences in overall diagnostic values comparing image spatial resolutions and filters. Diagnostic outcomes were significantly better for the largest defects than the smallest lesions but were generally poor in detecting lesions. All structures showed greater brightness in high resolution. . Noise was greater in all structures with all enhancement filters except inversion. Dentin and alveolar bone exhibited more noise and lower CNR in high resolution. CONCLUSIONS: Varying spatial resolution and applying enhancement filters did not significantly affect the diagnosis of furcation defects.

The influence of interradicular anatomy on the predictability of periodontal regenerative therapy of furcation defects: a retrospective, multicenter clinical study.

BACKGROUND: The relationship between the anatomy of the interradicular space and success in regenerative therapy of furcation defects is discussed in this paper. The goal of this retrospective, multicenter clinical study is to clinically evaluate the relationship between the interradicular conformation and regenerative therapy success with the use of a novel measurement method. METHODS: One hundred thirty-eight radiographs of mandibular molars with furcation defects that had been treated with regenerative therapy were collected from six clinical centers. Data on the type of therapy and clinical parameters before and after treatment (follow-up of at least 12 months) were collected. The radiographs (before surgery and at least 12 months postoperatively) were measured with a visual evaluation method by a blind operator using graphics software. RESULTS: Success, defined as a reduction in horizontal and vertical furcation involvement, decrease in probing depths, and increase in clinical attachment level, was statistically assessed on 138 regenerated molars sites and were related to clinical variables such as age, sex, center, and treatment. No correlation was found between success in regenerative therapy and the conformation of the interradicular space, measured with a visual ratio method and a standard linear measurement. At the univariate analysis, the parameters that had a correlation with success were center, extent of furcation involvement, treatment, and sex. The use of enamel matrix derivative (EMD) seemed to be the most favorable therapy, with increase in CAL gain and reduction of vertical or horizontal furcation involvement. CONCLUSIONS: The regenerative outcome was not significantly influenced by the anatomy of furcation. The center, the degree of furcation involvement, sex, and treatment (EMD) were significantly associated with higher success of periodontal regeneration.

Regenerative Surgery of Mandibular Class II Furcation Defects: A Comparison of Two Techniques in a Randomized Clinical Trial with 3D CBCT Measurements at 24 Months.

The aim of the present study was to evaluate, clinically and via CBCT, the long-term efficacy of a bioresorbable polylactic acid membrane combined with deproteinized bovine bone graft (DBBM) and compare it to enamel matrix derivative (EMD) combined with DBBM graft in the treatment of class II furcation defects. Sites were randomly assigned to the test group (Guidor Matrix Barrier + Bio-Oss) or the control group (Emdogain + Bio-Oss). Probing pocket depth (PPD), clinical attachment level (CAL), gingival recession (REC), and keratinized tissue (KT) width were assessed at 12 and 24 months, and radiographic bone gain was investigated at 24 months via CBCT. Both groups showed a significant radiographic bone fill and clinical gain. The combination of Emdogain + Bio-Oss showed better clinical outcomes and less complications, though this difference was not statistically significant.

Treatment for Chronic Periodontitis with Class II Furcation Involvement: A Case Report with Four-year Follow-up.

This report describes a case of generalized chronic periodontitis requiring periodontal treatment including surgery. The patient was a 64-year-old man who visited the Tokyo Dental College Suidobashi Hospital with the chief complaint of pain in tooth #27. An initial examination revealed a probing depth (PD) of ≥4 mm at 38.2% of sites and bleeding on probing at 26.5% of sites. Radiographic examination revealed vertical bone resorption in # 27, 34, and 47, and horizontal resorption in other areas. Based on a clinical diagnosis of severe chronic periodontitis, initial periodontal therapy consisting of plaque control, scaling and root planing was performed. Both #27 and #47 were extracted due to bone resorption extending as far as the root apex. After initial periodontal therapy, sites with a PD of ≥4 mm were observed at 16.7% of sites. Furcation involvement was observed in #16, 17, 36, and 37. The need and options for periodontal surgery based on these findings were explained to the patient. Open flap debridement was implemented for #16, 17, 31, 34, 36, and 37 to reduce periodontal pockets. After reevaluation, the patient was placed on supportive periodontal therapy. The results of the periodontal examination at first visit revealed a periodontal pocket depth of 6 mm and 7 mm in #16 and 17, respectively, and class II furcation involvement in both. Periodontal therapy with open flap debridement resulted in an improvement in horizontal bone resorption where there was class II furcation involvement. This improvement has been adequately maintained over a 4-year period.

Imaging furcation defects with low-dose cone beam computed tomography.

Different cone beam computed tomography (CBCT) protocols have shown promising results for imaging furcation defects. This study evaluates the suitability of low-dose (LD)-CBCT for this purpose. Fifty-nine furcation defects of nine upper and 16 lower molars in six human cadavers were measured by a high-dose (HD)-CBCT protocol, a LD-CBCT protocol, and a surgical protocol. HD-CBCT and LD-CBCT measurements were made twice by two investigators and were compared with the intrasurgical measurements, which served as the reference. Furcation defect volumes generated from HD-CBCT and LD-CBCT imaging were segmented by one rater. Cohen's kappa and intraclass correlation coefficient (ICC) values were calculated to determine intra- and interrater reliability. The level of significance was set at α = 0.05. In total, 59 furcation defects of nine upper and 16 lower human molars were assessed. Comparing CBCT furcation defect measurements with surgical measurements revealed a Cohen's kappa of 0.5975 (HD-and LD-CBCT), indicating moderate agreement. All furcation defects identified by HD-CBCT were also detected by LD-CBCT by both raters, resulting in a Cohen's kappa of 1. For interrater agreement, linear furcation defect measurements showed an ICC of 0.992 for HD-CBCT and 0.987 for LD-CBCT. The intrarater agreement was 0.994(r1)/0.992(r2) for HD-CBCT and 0.987(r1)/0.991(r2) for LD-CBCT. The intermodality agreement was 0.988(r1)/0.991(r2). Paired t-test showed no significant differences between HD-CBCT and LD-CBCT measurements. LD-CBCT is a precise and reliable method for detecting and measuring furcation defects in mandibular and maxillary molars in this experimental setting. It has the potential to improve treatment planning and treatment monitoring with a far lower radiation dose than conventional HD-CBCT.

A controlled study on the diagnostic accuracy of panoramic and peri-apical radiography for detecting furcation involvement.

BACKGROUND: The aims of this study were (1) to determine the accuracy, sensitivity, and specificity of panoramic and peri-apical radiographs in diagnosing furcation involvement, as well as (2) to evaluate the possible impact of clinical experience on these diagnostic parameters. METHODS: An existing radiographic dataset of periodontitis patients requiring implant surgery was retrospectively examined for furcation involvement. Criteria for inclusion were the presence of a CBCT, panoramic and peri-apical radiograph of the site of interest within a one-year time frame. All furcation sites were classified using the CBCT, which was considered as the gold standard, according to Hamp's index (1975). Ten experienced examiners and 10 trainees were asked to assess furcation involvement for the same defects using only the corresponding panoramic and peri-apical radiographs. Absolute agreement, Cohen's weighted kappa, sensitivity, specificity and ROC-curves were analyzed. RESULTS: The study sample included 60 furcation sites in 29 multi-rooted teeth from 17 patients. On average, 20/60 furcations were correctly classified according to the panoramic radiographs, corresponding to a weighted kappa score of 0.209, indicating slight agreement. Similarly, an average of 19/60 furcations were correctly classified according to the peri-apical radiographs, corresponding to a weighted kappa score of 0.211, also indicating slight agreement. No significant difference between panoramic and peri-apical radiography was found (P = 0.903). When recategorizing FI Grades into 'no to limited FI' (FI Grade 0 and I) and 'advanced FI' (FI Grade II and III), the panoramic and peri-apical radiography showed low sensitivity (0.558 and 0.441, respectively), yet high specificity (0.791 and 0.790, respectively) for identifying advanced FI. The ROC-curves for the panoramic and peri-apical radiographs were 0.79 and 0.69 respectively. No significant difference was found between experienced periodontists and trainees (P = 0.257 versus P = 0.880). CONCLUSION: Panoramic and peri-apical radiography are relevant tools in the diagnosis of FI and provide high specificity. Ideally, they are best used in combination with furcation probing, which shows high sensitivity. Furthermore, clinical experience does not seem to improve the accuracy of a radiological diagnosis of furcation sites. TRIAL REGISTRATION: Patient radiographic datasets were retrospectively analyzed.

Efficacy of FGF-2 in Periodontal Regeneration in a Case of Severe Intrabony Defect and Furcation Involvement With 15-Month Follow-Up.

INTRODUCTION: Several studies have demonstrated that basic fibroblast growth factor (FGF-2) is one of the most effective growth factors for periodontal regeneration. The Ministry of Health, Labor and Welfare in Japan have approved 0.3% human recombinant FGF-2 for periodontal regeneration, and it has been commercially available since 2016. In this case report, a patient was treated with this periodontal regenerative medicine and demonstrated success at 15-month follow-up, as confirmed by dental X-ray and on cone-beam computed tomography (CBCT). CASE PRESENTATION: A 42-year-old woman with a one by two walled intrabony defect and Class III furcation involvement in tooth #19, and Class II furcation involvement in tooth #18 (lingual) underwent periodontal regenerative surgery with FGF-2 without any bone graft materials. Favorable clinical and radiographic outcomes were noted 15 months after the procedure. The vertical bone defect in tooth #19 showed a clinical attachment level gain of 8 mm. Moreover, CBCT analysis revealed considerable new bone formation in the Class II furcation involvement in tooth #18 and limited bone formation in the Class III furcation involvement in tooth #19. CONCLUSIONS: This case report indicates that FGF-2 showed a positive outcome in terms of periodontal regeneration in a case of one by two wall intrabony defects with Class III furcation involvement. A complete recovery of Class II furcation involvement was observed without artificial bone graft materials.

Vital root resection in severely furcation-involved maxillary molars: Outcomes after up to 7 years.

AIMS: To introduce a novel therapeutic approach for the treatment of furcation-involved maxillary molars by vital root resection and report longer-term outcomes of a case series. METHODS: Eleven patients with 15 maxillary molars affected by double/triple class II (n = 10) or single/double class III (n = 5) furcation defects and advanced vertical bone loss around one root participated. Teeth were treated with deep pulpotomy using a calcium silicate-based cement. After 4 weeks, the affected roots were removed by periodontal microsurgery and processed for histological evaluation of the pulp. All patients were enrolled into a supportive periodontal care programme. During the follow-up period, assessments of tooth sensitivity, response to percussion, mobility, pocket probing depth (PPD) and bleeding on probing (BOP) were made, periapical radiographs obtained and patient-reported outcomes collected. RESULTS: All teeth remained sensitive to pulp testing. After 1 year and 3-7 years of follow-up, PD was ≤5 mm at all resected teeth. Furcation status was much improved. Neither increasing mobility nor clinical or radiographic signs of periapical pathology were observed throughout the individual observation period. All patients were pleased with the result of therapy. Histologic sections revealed a functional dentin-pulp complex. CONCLUSIONS: This case series demonstrates the possibility of maintaining severely furcation-involved molars by vital root resection for up to 7 years. Root canal therapy and its associated costs and complications can thus be avoided.

Impact of CBCT image quality on the confidence of furcation measurements.

BACKGROUND: To investigate the impact of scanning parameter in cone-beam computed tomography (CBCT) images on accuracy and confidence with measurements of furcation involvement (FI) in maxillary molars. MATERIAL AND METHODS: Six half cadaver heads with present maxillary molars (n = 10) were available. CBCT scans with the fixed-parameter field of view (4 × 4 cm, 12 × 17 cm) amperage and voltage (4 mA, 90 kV) and with varying scan modes (SM), that is images/scan (IS), voxel sizes (VZ) and rotation (R), were performed using one CBCT apparatus. The images were analysed by two calibrated investigators. Horizontal FI's were measured in mm or a "through and through" destruction (FI degree III) was recorded. Each rater scored the FI measurements performed in each scan as "confident" or as "not confident". Data were statistically analysed using chi-square tests. RESULTS: The agreement between CBCT FI measurements and intra-surgical FI measurements varied according to SM (SM HiSp 180°, 0.08: kappa 0.538, CI; 95%: 0.362-0.714; SM Std. 360°, 0.25: kappa 0.698, CI; 95%: 0.534-0.861). The number of measurements scored as "confident" varied according to SM (SM Std. 360°, 0.08:52 out of 60 measurements; SM Std. 360°, 0.25:16 out of 60 measurements; p < .001). CONCLUSIONS: SM of CBCT significantly affect the confidence with FI measurements in maxillary molars.

Platelet-rich fibrin in combination with decalcified freeze-dried bone allograft for the management of mandibular degree II furcation defect: A randomised controlled clinical trial.

Background: Treatment of furcation involvement of molars with periodontal disease remains challenging and unpredictable. Platelet-rich fibrin (PRF) has received the attention of researchers due to its pleiotropic properties essential for periodontal wound healing. The osteoinductive property of demineralized freeze-dried bone allograft (DFDBA) has been successfully used in periodontal regeneration. Aim: The present study aimed to explore the effectiveness of PRF alone and with DFDBA in the treatment of mandibular degree II furcation defects in subjects with chronic periodontitis. Material and Methods: Patients treated were from the Department of Periodontology and Implantology, Institute of Dental Sciences, Bareilly. A total of 60 mandibular molars were treated with either open flap debridement (OFD) alone, [Formula: see text] combination or [Formula: see text] combination. The soft and hard tissue parameters such as vertical probing depth (VPD), vertical clinical attachment level (VCAL), gingival marginal level (GML), horizontal probing depth (HPD), vertical bone fill (VBF), horizontal bone fill (HBF) and furcation width (FW) were determined at baseline and 9 months postoperatively. A paired [Formula: see text]-test was conducted to assess the statistical significance between time period within each group for clinical and radiographic parameters. ANOVA and post-hoc Tukey's tests were also conducted for intergroup comparison of soft and hard tissue parameters. Statistical significance was set at [Formula: see text]. Results and Discussion: After 9 months, all treatment groups showed significant ([Formula: see text]) improvement in soft and hard tissue parameters, except GML in all the three groups and HBF and FW in the OFD group as compared to baseline. The mean VBF change was highest in the [Formula: see text] group ([Formula: see text]) mm, followed by that in the [Formula: see text] and OFD groups ([Formula: see text] and [Formula: see text][Formula: see text]mm, respectively). Conclusions: It was shown that both [Formula: see text] and [Formula: see text] combinations were significantly advantageous for the management of mandibular degree II furcation defects. However, the [Formula: see text] combination has significantly greater benefits than [Formula: see text] combination in terms of VBF.

[Effect of concentrated growth factors on the treatment of degree II furcation involvements of mandibular molars].

OBJECTIVE: Concentrated growth factors (CGF), a new generation of platelet concentrate products, appears to have more abundant growth factors because of its special centrifugation process. However, there are few studies supporting this. This study was designed to evaluate the effect of CGFs in the treatment of II° furcations of mandibular molars. METHODS: In the present study, thirty-one II° furcation involvements in twenty mandiblular molars were included and randomly divided into two groups. The furcation involvements in the experimental group were treated with bone graft therapy combined with CGFs, and the furcation involvements in the control group were treated with bone graft therapy alone. The clinical examination and cone beam computed tomography (CBCT) were performed at baseline and 1 year post-surgery for the two groups. The changes of clinical and CBCT data at baseline and 1 year post-surgery were compared between the experimental group and the control group. RESULTS: At baseline, there were no significant differences between the two groups in the probing depth (PD), vertical clinical attachment loss (CAL-V) and horizontal clinical attachment loss (CAL-H): PD (7.36±2.32) mm (the experimental group) vs. (7.53±2.06) mm (the control group); CAL-V (8.69±1.65) mm (the experimental group) vs. (8.81±1.53) mm (the control group); CAL-H (5.24±2.01) mm (the experimental group) vs. (5.35±2.14) mm (the control group). At the end of 1 year post-surgery, the clinical parameters of both groups were significantly improved (P<0.001). For the experimental group, the average vertical attachment gain was (2.78±1.66) mm, and the vertical attachment loss was improved significantly compared with the baseline (P<0.001); the average horizontal attachment gain was (2.10±1.89) mm, and the horizontal attachment loss were improved significantly compared with the baseline (P<0.001). Furthermore, the improvement degree of the experimental group was significantly higher than that of the control group (P<0.001). At baseline, there were no statistical differences in the vertical bone loss (BL-V) or horizontal bone loss (BL-H) between the two groups (P>0.05): BL-V (5.08±2.17) mm (the experimental group) vs. (5.84±2.65) mm (the control group); BL-H (5.85±2.13) mm (the experimental group) vs. (6.01±2.27) mm (the control group). At 1 year post-surgery, both groups showed significant radiographic bone gain at vertical and horizontal directions compared with baseline (P<0.001). For the experimental group, the average vertical radiographic bone gain was (2.20±1.98) mm, the horizontal radiographic bone gain was (2.51±2.18) mm, the vertical and horizontal radiographic bone loss were both significantly reduced compared with the baseline (P<0.001). For the control group, the average vertical radiographic bone gain was (1.89±2.15) mm, the horizontal radiographic bone gain was (1.30±2.47) mm, the vertical and horizontal radiographic bone losses were both significantly reduced compared with the baseline (P<0.001). And the experimental group showed significantly higher bone gain at vertical and horizontal directions compared with the control group (P<0.001). CONCLUSION: Within the limitation of the present study, CGFs showed positive role in the treatment of II° furcation involvements of mandibular molars.

[Observation of bone morphology in furcation defects of mandibular molars using cone beam computed tomography].

OBJECTIVE: To observe mesial-distal bone morphology in classes II and III furcation involvements (FI) of mandibular molars using cone beam computed tomography (CBCT), to develop a classification system of mesial-distal bone morphology of furcation defects and to observe the intrabony defects on CBCT images. METHODS: Based on the existing CBCT data, the mandibular molars with horizontal bone defects in furcation area were observed. One hundred and seventeen sites of 81 mandibular molars with class II or class III FIclassified on CBCT images were included. The classification system of mesial-distal bone morphology of furcation defects was developed. According to the location of the line drawn from mesial to distal alveolar bone crest (AC-line) of the tooth and bone level under furcation fornix, the bone morphology was classified into three types, including concave type, flat type and protruding type. The concave type was divided into two subtypes according to the location of AC-line and furcation fornix (Fx), which were subtype 1(AC-line coronal or equal to Fx)and subtype 2 (AC-line apical to Fx).The frequency of each type was calculated and analyzed. The intrabony defects was observed on sagittal CBCT images. RESULTS: In the 117 sites with FI, the flat type appeared with the highest rate (64.10%) and the protruding type appeared with the lowest rate (6.84%). The rates of subtype 1 and subtype 2 of concave type were 13.68% and 15.38%, respectively. The rate of subtype1 which was supposed to be beneficial for bone regeneration was 8.96% in class II FI and 20.00% in class III FI. Thirtyone intrabony defects were found among the 117 FI, 29 of which appeared in proximal aspect of the tooth and the left 2 appeared in furcation area. The highest frequency of the intrabony defects was found in subtype 1 of concave type. CONCLUSION: The classification of mesial-distal bone morphology on CBCT images may be helpful for clinicians to make accurate treatment plan before surgery and could be used in future studies to understand the influence of bone morphology on regenerative therapy for furcation defects.

Mandibular Degree II Furcation Defects Treatment With Platelet-Rich Fibrin and 1% Alendronate Gel Combination: A Randomized Controlled Clinical Trial.

BACKGROUND: Different materials have been investigated for renewal of lost supporting periodontal structures and tested for furcation defect treatment. Platelet-rich fibrin (PRF) is a pool of growth-promoting factors and cytokines that promote bone regeneration and maturation of soft tissue. Alendronate (ALN), an influential member of the bisphosphonate group, is known to enhance osteoblastogenesis and inhibit osteoclastic bone resorption, thus promoting tissue regeneration. This randomized trial was done to assess effectiveness of PRF and 1% ALN gel combination in mandibular degree II furcation defect treatment in comparison with PRF and access therapy alone. METHODS: Seventy-two mandibular molar furcation defects were treated with either access therapy alone (group 1), access therapy with PRF (group 2), or access therapy with PRF and 1% ALN (group 3). Plaque index, modified sulcus bleeding index, probing depth (PD), relative vertical attachment level (RVAL) and relative horizontal attachment level (RHAL), and intrabony defect depth were recorded at baseline and 9 months postoperatively. Radiographically, defect fill, assessed in percentage, was evaluated at baseline, before surgery, and 9 months post-therapy. RESULTS: Group 3 showed greater PD reduction and RVAL and RHAL gain when compared with groups 1 and 2 postoperatively. Moreover, group 3 sites showed a significantly greater percentage of radiographic defect fill (56.01% ± 2.64%) when compared with group 2 (49.43% ± 3.70%) and group 1 (10.25% ± 3.66%) at 9 months. CONCLUSIONS: Furcation defect treatment with autologous PRF combined with 1% ALN gel results in significant therapeutic outcomes when compared with PRF and access therapy alone. Combining ALN with PRF has potential for regeneration of furcation defects without any adverse effect on healing process.

Assessment of furcal perforations in the vicinity of different root canal sealers using a cone beam computed tomography system with and without the application of artifact reduction mode: an ex vivo investigation on extracted human teeth.

OBJECTIVE: To investigate observer ability to diagnose ex vivo simulated endodontic furcal perforations in root-filled teeth from cone beam computed tomography (CBCT) images using different artifact reduction algorithms. STUDY DESIGN: Our study consisted of 135 first maxillary molar teeth. In 89 teeth, furcation perforations were created using dental burs. Forty-six teeth without artificial perforations were used as controls. MTA Fillapex, Activ GP, and AH Plus were used with or without metal posts. All teeth were imaged using Planmeca ProMax 3-D Max CBCT, and four image modes were obtained as without artifact reduction and with artifact reduction in low, medium, and high modes. Images were evaluated by three observers for the presence or absence of furcation perforation using a five-point scale. Weighted kappa coefficients were calculated to assess observer agreement. Receiver operating characteristic analysis was performed. Areas under the curve (AUCs) were calculated for each image mode, observer, treatment group, and reading and were compared using Χ(2) tests, with a significance level of α = 0.05. The effects on diagnosis were calculated using analysis of variance (ANOVA). RESULTS: Intraobserver agreements for all observers ranged from 0.857 to 0.945. Kappa coefficients among different observers ranged from 0.673 to 0.763. AUC values ranged from 0.83 to 0.92, and there were no statistically significant differences (P > .05) between different CBCT image modes. Ratings in Activ GP treatment groups with or without posts showed statistically significant differences (P < .001). CONCLUSIONS: All CBCT image modes performed similarly in detecting furcal perforations near different root canal sealers with or without posts.

Significance of maxillary sinus mucosal thickening in patients with periodontal disease.

AIM: To characterise and measure the Schneiderian membranes of individuals with periodontal diseases in China and to analyse the factors impacting maxillary sinus mucosal thickness using cone-beam computed tomography (CBCT). MATERIAL AND METHOD: A cohort of 221 patients with periodontal disease was subjected to cross-sectional CBCT examination. Various parameters, including age, sex, alveolar bone loss, furcation lesions and vertical infrabony pockets, were analysed as correlates of mucosal thickening (MT). Sinus mucosal thickness ≥ 2 mm qualified as MT. RESULTS: MT was detected in 103 (48.9%) patients, increasing in frequency as the degree of alveolar bone loss advanced (mild, 14.5%; moderate, 29.5%; severe, 87.9%). The association between MT and vertical infrabony pockets was statistically significant (P < 0.001). The likelihood of MT increased with moderate [odds ratio (OR) = 1.02] and severe (OR = 4.62) periodontal bone loss (P < 0.001), as well as with furcation lesions (OR = 2.76) and vertical infrabony pockets (OR = 13.58). CONCLUSIONS: Relative to the case in patients with periodontitis and normal mucosa, the probability of MT increased dramatically as alveolar bone loss worsened. Periodontal pathologies (i.e. furcation lesions and vertical infrabony pockets) were also more likely to coincide with MT.

Effect of voxel size on accuracy of cone beam computed tomography-aided assessment of periodontal furcation involvement.

OBJECTIVE: To assess the accuracy of cone beam computed tomography (CBCT) images obtained at different voxel sizes in detecting ligature-induced furcation involvement. STUDY DESIGN: Furcation lesions were prepared in 36 molar teeth in rats, and 24 intact teeth served as controls. CBCT Kodak 9000 images at three different voxel sizes were acquired: 0.076 mm, 0.100 mm, and 0.200 mm. Four observers assessed 3 sets of images using a 5-point evaluation scale. κ-Coefficients were calculated for intra- and interobserver agreement. Receiver operating characteristic analysis measured the true positive rate (TPR), true negative rate (TNR), and area under the curve (AUC). Accuracy values were compared by using Mood's Median Chi-Square (α<0.05). RESULTS: Intra- and interobserver agreement ranged from 0.600 to 0.999 and from 0.366 to 0.573, respectively. Highest median AUC and true positive rate (TPR) values were obtained for voxel size of 0.076 mm. The highest median TNR values were obtained for the voxel size 0.1 mm. There were no significant differences (P≥.05) among the median AUC, TPR, or TNR values for the 3 different CBCT voxel sizes. CONCLUSIONS: Given the limitations of this study, all voxel sizes performed similarly in the detection of furcation involvement.

Consecutive Case Series Using a Composite Allograft Containing Mesenchymal Cells with an Amnion-Chorion Barrier to Treat Mandibular Class III/IV Furcations.

This retrospective case series describes a layered regenerative approach for five Class III and one borderline Class IV furcation, involving treatment consisting of root management that included conditioning with tetracycline solution followed by the topical application of recombinant platelet-derived growth factor BB. A composite allograft with mesenchymal stem cells was subsequently placed into the furcation and covered by a barrier derived from human amnion-chorion with flaps advanced to completely cover the site. Three furcations, including the one diagnosed as Class IV, had complete closure, two were converted to Class I, and in one instance, there was no improvement. This regenerative algorithm for mandibular Class III furcations may present the potential to save these teeth by altering the prognosis, which has traditionally been poor to hopeless, resulting in many of these teeth routinely being extracted.

Influence of low-intensity pulsed ultrasound on osteogenic tissue regeneration in a periodontal injury model: X-ray image alterations assessed by micro-computed tomography.

OBJECTIVE: This study was conducted to evaluate, with micro-computed tomography, the influence of low-intensity pulsed ultrasound on wound-healing in periodontal tissues. METHODS: Periodontal disease with Class II furcation involvement was surgically produced at the bilateral mandibular premolars in 8 adult male beagle dogs. Twenty-four teeth were randomly assigned among 4 groups (G): G1, periodontal flap surgery; G2, periodontal flap surgery+low-intensity pulsed ultrasound (LIPUS); G3, guided tissue regeneration (GTR) surgery; G4, GTR surgery plus LIPUS. The affected area in the experimental group was exposed to LIPUS. At 6 and 8weeks, the X-ray images of regenerated teeth were referred to micro-CT scanning for 3-D measurement. RESULTS: Bone volume (BV), bone surface (BS), and number of trabeculae (Tb) in G2 and G4 were higher than in G1 and G3 (p<0.05). BV, BS, and Tb.N of the GTR+LIPUS group were higher than in the GTR group. BV, BS, and Tb.N of the LIPUS group were higher than in the periodontal flap surgery group. CONCLUSION: LIPUS irradiation increased the number, volume, and area of new alveolar bone trabeculae. LIPUS has the potential to promote the repair of periodontal tissue, and may work effectively if combined with GTR.

Periodontal probing versus radiographs for the diagnosis of furcation involvement.

BACKGROUND: Decisions in periodontal therapy for multirooted teeth are essentially based on accurate diagnosis of the furcation involvement (FI). Furcation probing (FP) is still the basic diagnostic measure, although the assessment may be difficult. The aim of this study is to evaluate the validity of FP and radiographic assessment of FI compared with visual assessment during open flap surgery (OFS). METHODS: In this retrospective clinical cohort study, 215 participants with periodontal disease and at least one molar treated with OFS were enrolled, and a total of 834 molars were assigned for FI by FP and in radiographs analyzed by an experienced (EE) and less experienced examiner (LE). For the investigation, 143 panoramic radiographs (OPGs) and 77 intra-oral radiographs (I-Os) were evaluated. RESULTS: The Class of FI by FP was confirmed in 56%, whereas 15% were overestimated and 29% underestimated. FI Class 0 and I had been detected with high probability (74% and 54%, respectively). Of all FI Class III, 57% were detected correctly by radiographs and 32% by FP. FP and OFS revealed a weighted κ-coefficient (κw) = 0.588; radiographs and OFS had κw = 0.542 (OPG κw = 0.555 and I-O κw = 0.521). The interrater reliability for radiographs was dependent on the experience of the examiner (EE κw = 0.618; LE κw = 0.426). CONCLUSIONS: Experience in analyzing conventional radiographs increases the potential of correct diagnosis of advanced FI. The reliability of FP compared with radiographic assessment depends on the anatomy and location of the tooth. Both diagnostic tools should be used in cases of suspected FI.