Exodontia associated bacteremia in horses characterized by next generation sequencing.

Bacteremia resulting from dental surgery is increasingly recognized as a health risk, especially in older and immunocompromised patients. Dentistry-associated bacteremia can lead to remote infections, as exemplified by valvular endocarditis. Emerging evidence points to a novel role played by oral cavity commensals in the pathogenesis of diabetes, respiratory disease, cardiovascular disease, and adverse pregnancy outcomes. Whether dental extraction, a commonly undertaken procedure in old horses, causes bacteremia has not been reported extensively. In a prospective clinical study using next generation sequencing (based on bacterial 16S rRNA), the circulating blood microbiome was characterized before and at 1 h following extraction of incisor, canine or cheek teeth from 29 adult horses with dental disease. 16S rRNA gene sequencing results from the blood microbiome were compared with those from gingival swab samples obtained prior to extraction at the location of the diseased tooth. Bacteremia associated with translocated gingival commensals was demonstrated in horses undergoing exodontia and was, in some cases, still evident one hour post-operatively.

Autogenous Tooth Bone Graft and Simvastatin Combination Effect on Bone Healing.

OBJECTIVE: Autogenous tooth bone grafts (ATGM) are materials prepared from extracted teeth and have been used for bone augmentation. These graft materials are known to have similar structures and components to bone grafts. In this sense, this study aimed to evaluate all the tooth layers mixed with simvastatin without any demineralization process effect on bone formation. METHODS: In 60 Wistar albino rats, a standardized 6.0 m-diameter critical size bone defect was created in their calvarium. The study consists of 1 control and 4 experimental groups. In the control group (12 rats), the defects were left empty. The defects were grafted only with ATGM in Group 1, with ATGM mixed with simvastatin in Group 2, autogenous bone graft mixed with simvastatin in Group 3, and with xenogenic bone graft mixed with simvastatin in Group 4. The animals were sacrificed at the 7th and 28th days after operation. RESULTS: PCR, micro CT and histological results show that bone formation was enhanced in the experimental groups in comparison to the control group. Group 1 and Group 2 had similar bone formation rate when compared to Group 3 and Group 4 at the 28th day after operation. CONCLUSION: This study concludes that mineralized teeth may be used for defect reconstruction without any demineralization process. Autogenous mineralized tooth bone graft should be mixed with simvastatin for bone regeneration like other grafts.

Laser Doppler Assessment of Microcirculation of Apical Periodontitis before Nonsurgical and during Surgical Laser Treatment.

INTRODUCTION: Laser doppler flowmetry is a non-invasive method of measuring microcirculatory blood flow in tissue. Using laser doppler flowmetry Moor VMS-LDF1-HP and CP1T-HP probe combined with Moor VMS-PC software to evaluate the state of the periapical lesion (cyst) before nonsurgical endodontic treatment with bioceramics (Well Root SP™) and compare it to a healthy vital tooth of the same type with no periapical lesions. Later the bony crypt of the cyst was evaluated with Moor VMSLDF1-HP and VP7BS-HP probe during periapical surgery after the cyst was ablated with Er: YAG laser Lite Touch™ (Sineron, Israel) and retrogradely obturated with TheraCal LC®. Then the cyst received a bioceramic bone graft. To our knowledge, this is the first time laser doppler has been used during periapical surgery to evaluate tissue perfusion. Lesion type was confirmed with a histological examination after surgery. AIM: Evaluate tissue perfusion of a periapical lesion before nonsurgical treatment and during surgical endodontic treatment with Er:YAG laser with the help of laser doppler flowmeter. RESULTS: Laser doppler flowmetry shows that the cystic tooth has a decreased blood flow, decreased concentration, direct current, speed, and lower temperature compared to a healthy tooth of the same type. During periapical surgery, the direct laser blood flow evaluation of the surgical crypt shows different values of the flux, speed, direct current, concentration, and temperature, which could be attributed to the mechanical trauma, adrenaline in the local anaesthetic or laser irradiation of tissues. CONCLUSIONS: Laser doppler flowmetry is a valuable method to perform tissue evaluation before, during and after treatment. It allows us to follow up the healing and pathological dynamics of microcirculatory tissue changes as well as evaluate and compare different methods and materials for treatment of apical periodontitis.

Simultaneous Perio-endo Surgery with ER:YAG Laser and Bone Xenograft. A Case Report.

Periodontally affected teeth with periapical lesion indicated for periapical surgery have a poor prognosis. Using Er:YAG lasers to perform simultaneous surgery on both defects may increase their survival rate. Preparing a retrograde cavity on affected teeth and obturating it is still a matter of debate among clinicians. The purpose of this case report was to describe the simultaneous use of Erbium-doped Yttrium Aluminium Garnet Er:YAG (2,940 nm) laser in the treatment of periapical granuloma and infraossal defect and the achieved results. The Er:YAG laser was used to perform flap dissection, granulation tissue removal, osteotomy and root-end resection except for initial flap incision and reflection. The cystic cavity was filled with Bio-Oss Collagen® xenograft. Results were followed up for 18 months with the help of radiographic orthopantomographic images. The outcome of this clinical case indicates that the use of Er:YAG laser could be considered a suitable method to perform simultaneous periodontal and endodontic surgery.

The Effects of Premature Tooth Extraction and Damage on Replacement Timing in the Green Iguana.

Reptiles with continuous tooth replacement, or polyphyodonty, replace their teeth in predictable, well-timed waves in alternating tooth positions around the mouth. This process is thought to occur irrespective of tooth wear or breakage. In this study, we aimed to determine if damage to teeth and premature tooth extraction affects tooth replacement timing long-term in juvenile green iguanas (Iguana iguana). First, we examined normal tooth development histologically using a BrdU pulse-chase analysis to detect label-retaining cells in replacement teeth and dental tissues. Next, we performed tooth extraction experiments for characterization of dental tissues after functional tooth (FT) extraction, including proliferation and ß-Catenin expression, for up to 12 weeks. We then compared these results to a newly analyzed historical dataset of X-rays collected up to 7 months after FT damage and extraction in the green iguana. Results show that proliferation in the dental and successional lamina (SL) does not change after extraction of the FT, and proliferation occurs in the SL only when a tooth differentiates. Damage to an FT crown does not affect the timing of the tooth replacement cycle, however, complete extraction shifts the replacement cycle ahead by 4 weeks by removing the need for resorption of the FT. These results suggest that traumatic FT loss affects the timing of the replacement cycle at that one position, which may have implications for tooth replacement patterning around the entire mouth.

Three-dimensional evaluation of skeletal and dental changes in patients with skeletal class III malocclusion and facial asymmetry after surgical-orthodontic treatment.

OBJECTIVE: To evaluate skeletal and dental changes in patients with skeletal Class III malocclusion and facial asymmetry after surgical-orthodontic treatment using cone-beam computerized tomography (CBCT). METHODS: This study included forty adult patients diagnosed with skeletal Class III malocclusion and asymmetry who underwent either isolated mandibular surgery or bimaxillary surgery. CBCT scans were taken before treatment (T0), at the completion of presurgical orthodontic treatment (T1) and after treatment (T2). Mimics 17.0 and 3-Matics 7.0 were used to measure skeletal and dental parameters. Skeletal and dental changes within each group from pretreatment to posttreatment were assessed, and Pearson correlation analysis was used to analyze the correlations among skeletal changes. RESULTS: The three-dimensional changes in condylar position were insignificant after surgical-orthodontic treatment in either group (P > 0.05). However, in the one-jaw surgery group, there were significant backward rotations of the condyle and ramus on the nondeviated side (P < 0.05), and the condyle on the deviated side rotated inward and forward significantly in the two-jaw surgery group (P < 0.05) at T2. There were no significant differences in the changes in the total alveolar bone thickness of bilateral first molars during dental decompensation (P > 0.05). The ratio between the buccal and the total bone thickness around the maxillary first molar on the deviated side decreased significantly at T1, as did those around the mandibular first molar on the nondeviated side (P < 0.05). CONCLUSIONS: Condylar angulations were less stable after treatment (7 to 9 months after surgery) in both the one-jaw and the two-jaw surgery groups, while condylar displacements were insignificant. In addition, orthodontists should keep a watchful eye to the relative position of the root in the alveolar bone during tooth decompensation.

Orthognathic surgery with two-segment le fort i and sagittal split ramus osteotomies of open bite deformity in an amelogenesis imperfecta patient via virtual planning: A case report.

Amelogenesis imperfecta (AI) is an enamel defect and is often associated with the anterior open bite (AOB) and transverse maxillary deficiency. It is known that in such cases when AI and AOB appeared together, posterior maxillary impaction with or without bilateral mandibular ramus osteotomies is a frequently preferred treatment option. Virtual planning is more reliable rather than the conventional model surgery planning, especially for complicated cases. Usage area of virtual 3D anatomical models reconstructed from Cone Beam Computed Tomography (CBCT) data is expanding day by day for both diagnosis and surgical planning. The aim of this study is to present a patient with AI and AOB and transverse maxillary deficiency and management of this case with virtually planned two-segment Le fort I and sagittal split ramus osteotomies followed by prosthetic rehabilitation.

A Multidisciplinary Approach of an Endo-Perio Lesion in a Severely Compromised Tooth: An 18-Year Follow-up Case Report.

This case report describes the diagnosis, multidisciplinary treatment, and long-term follow-up of a severely compromised tooth in a patient who was referred for assessing a gingival recession. Clinical evaluation of the left maxillary canine showed 12 mm of mid-buccal gingival recession, probing depth of 14 mm on the mesial-buccal aspect, and grade III mobility. A periapical radiograph revealed extensive periapical and lateral radiolucency. The first step of the treatment was to carry out oral hygiene instructions and full-mouth debridement. After that, endodontic treatment was performed immediately. Periodontal reevaluation four months after endodontic therapy revealed that probing depths of all sites were within 3 mm and periapical radiograph showed a slight decrease in periapical and lateral radiolucency. It was subsequently decided to perform root coverage with a laterally positioned flap and subepithelial connective tissue graft. Six months after surgery, the root surface showed 1 mm recession, representing root coverage of 91.7% and a gain of attachment of 13 mm. The patient was enrolled in a 6-month supportive periodontal therapy. Treatment outcomes were evaluated over 18 years, with successful radiographic and clinical results throughout the follow-up period. The successful management of endo-periodontal lesions requires an accurate diagnosis, which is imperative to provide proper therapy in the correct treatment sequence.

Cone-beam computed tomography assessment of Schneiderian membranes: Non-infected and infected membranes, and membrane resolution following tooth extraction: A retrospective clinical trial.

BACKGROUND: Cone-beam computed tomography (CBCT) presurgical assessment on the maxillary sinus can reduce the possibility of Schneiderian membrane perforation. This study examined Schneiderian membrane thickness (SMT) and its relationship with neighboring hard tissues for patients with and without membrane thickening. For patients with sinus infections, we evaluated dimensional changes of the SMT post-extraction relative to pre-extraction SMT and residual bone height (RBH). METHODS: CBCT images from 93 patients needing single-tooth implant reconstruction without (n = 83) and with (n = 14) odontogenic infected maxillary sinuses were assessed. SMT, RBH, and lateral wall thickness (LWT) were measured. Causes of extraction, RBH in the infection site, and retrospective post-extraction record of SMT were recorded for the thickened SMT group. RESULTS: Mean SMT for normal SMT group was 1.13 ± 0.43 mm, RBH was 6.26 ± 2.38 mm; upper and lower LWT was 1.85 ± 0.95 mm, and 3.07 ± 2.26 mm, respectively. RBH and LWT had no significant relationships with SMT. For thickened SMT group, mean values for SMT and RBH prior to extraction were 4.53 ± 2.46 mm and 1.97 ± 1.43 mm, respectively. Pre-extraction SMT had a moderately negative correlation with pre-extraction RBH. SMT resolution in thickened SMT group was observed by 2.80 ± 1.37 months post-extraction; post-extraction SMT was not significantly different from normal SMT group (p = .187). CONCLUSIONS: Within the limitation of the sample size, thickened SMT induced by odontogenic infection subsides about 3 months following tooth extraction, and further sinus lifting implant surgery may be considered.

Single-Implant Treatment.

The replacement of one tooth using one implant involves a set of unique criteria for long-term success. Successful therapy should be based on long-term function and health of the adjacent tissues. Sections of this article examine these critical criteria that when working together can result in successful long-term tooth replacement.

Healing Capacity of Autologous Bone Marrow-derived Mesenchymal Stem Cells on Partially Pulpotomized Dogs' Teeth.

INTRODUCTION: Partial pulpotomy is a vital treatment for carious and traumatic exposure, especially in young permanent teeth. Cell-based therapy for partially pulpotomized teeth can be considered a promising approach for dentin-pulp complex regeneration. This study evaluated the healing capacity of autologous bone marrow-derived stem cells (BMSCs) on partially pulpotomized teeth in a dog model. METHODS: Twelve mongrel dogs were selected, and a total number of 192 posterior mandibular and maxillary teeth were involved in the study (16 teeth per dog). Partial pulpotomies were performed, and the dogs were assigned into 2 equal groups (groups 1 and 2), 6 dogs in each group. The coronal pulp cavities (n = 96) of group 1 were filled with calcium silicate-based capping material. Group 2 coronal pulp cavities (n = 96) were seeded with 1 × 105 cell/mL BMSCs, and then the cavities were filled with calcium silicate-based capping material. After placing the capping materials, the cavities of both groups (1 and 2) were filled with resin-modified glass ionomer restorative material. From each group, 48 teeth from 3 dogs were evaluated histologically after 1 week, and the other 48 teeth from the remaining 3 dogs were evaluated after 9 weeks. Scoring was done for the amount of inflammatory cell infiltrates, tissue necrosis, and thickness of hard tissue bridge formation. RESULTS: The Mann-Whitney U statistical test performed for hard tissue bridge formation revealed significant differences between the 2 groups at the 1- (P < .05) and 9-week (P < .05) examination periods. CONCLUSIONS: Autologous BMSCs have significant therapeutic potential because they enhance the healing capacity of partially pulpotomized dogs' teeth.

Revisiting the Maxillary Teeth in 384 Subjects Reveals A Deviation From the Classical Aesthetic Dimensions.

Dental esthetics need to be defined from the scientific perspective in order to obtain predictable treatment outcomes and avoid the effects of subjectivisms on the part of the dental profesional. It can be deduced that the ideal dimensions in the maxillary anterior sector are difficult to establish. Therefore, the primary purpose of this study was to define the dimensions of the maxillary anterior teeth and the relationships between them. In addition, an analysis was made to reinvestigate whether they complied with the Golden proportion, the RED (Recurrent Esthetic Dental) proportion and the Golden percentage. A total of 2304 tooth corresponding to 384 subjects were evaluated. The central incisor presented a mean width of 8.58 mm and a height of 9.35 mm, while the lateral incisor presented a width of 6.69 mm and a height of 7.75 mm. The mean width of the canine was 7.69 mm, with a height of 8.68 mm. The teeth revisited in this study did not comply with the ideal dimensions in the anterior maxillary sector as established by the Golden proportion, Golden percentage and RED. The information obtained from this study can be clinically applied to restore the dimensions during periodontal surgery, restorative dentistry and prosthetic rehabilitation.

Prediction of femtosecond laser ablation profile on human teeth.

To predict the laser ablation profile on dental hard tissue which will enable the user to optimize laser parameters so as to carry out the laser treatment with minimal tissue damage. The present study constructs a mathematical model to predict the ablation profile based on Gaussian beam distribution of laser intensity and correlates the model with experimentally obtained ablation parameters (effective Gaussian beam radius, ablation threshold fluence, and effective energy penetration depth). To obtain the ablation parameters, laser ablation experiments were carried out on dental hard tissues using Ti:Sapphire femtosecond laser (800 nm, 100 fs, 10 kHz). The method is further extended to predict the ablation rate and efficiency as well. The profile predicted from the mathematical model is compared with that of experimental results. It is found that the predicted ablation profile agrees well with the experimental profile for both enamel and dentin except a slight deviation at higher fluence for dentin. The calculated ablation rate is comparable to that of experimental results whereas for ablation efficiency appreciable deviation is observed in the case of dentin. The model succinctly predicts the ablation profile, ablation rate, and ablation efficiency which will enable to perform dental surgery at optimized laser processing conditions with high precision thus reducing the tissue damage appreciably. Once the details of lesion are known through proper diagnostic tools, the method enables the user to readily obtain optimum laser parameters. It can be used as a handy reference for dentists to perform damage-free surgery, ensuring quicker healing.

Safe Casting and Reliable Cusp Reconstruction Assisted by Micro-Computed Tomographic Scans of Fossil Teeth.

Dental replicas are frequently utilized in paleoanthropological studies of perikymata and enamel hypoplasia. However, fossil teeth are often fragile and worn, causing two problems: (1) the risk of damage by removing enamel fragments when impression-making material is separated from the fossil tooth surface, and (2) the need to reconstruct worn portions of the crown to assess perikymata number, distribution, and hypoplasia timing. This study presents the advantages of µCT data of canines and lateral incisors for (1) detecting cracks along the enamel-dentine junction (EDJ) which could cause damage when casting, and (2) reliably and non-destructively reconstructing worn or broken cusps. Fragile teeth of Homo naledi, Miocene, and Pleistocene specimens were µCT-scanned: 2D virtual sections and 3D models allowed for inspecting crack pattern beyond the external surface and 2D virtual sections were used to digitally reconstruct cusp tips (only Homo naledi). Micro-CT scans allowed cracks running along the EDJ and communicating with radial cracks in the enamel to be identified prior to casting. Cusp reconstructions using µCT data were conducted as precisely as when using thin-sections or photographs, and with high intra- and inter-observer agreement, while preserving the original specimen and affording numerous planes of virtual section. When available, µCT data should be inspected prior to tooth casting to exclude teeth that show a pattern of cracks that could lead to damage. Virtual sections allow for accessible, reliable, and non-destructive cusp reconstructions that may be used for developmental (e.g., perikymata and enamel hypoplasia) or enamel thickness studies. Anat Rec, 302:1516-1535, 2019. © 2018 American Association for Anatomy.

Is there a correlation between students' performance in dental anatomy and performance in operative dentistry? / ¿Existe una correlación entre el rendimiento de los estudiante de anatomía dental y el rendimiento en odontología operativa?

SUMMARY: Manual skills form only a part of the capabilities required for a future dentist. Nevertheless, they are very important components that should be tested. The aim of this study is to investigate if a correlation exists between dental students' grades in the preclinical courses and their clinical performance. Preclinical/clinical grades were collected for first, fourth, and fifth year students who graduated from the Faculty of Dentistry at the University of Jordan, Amman, Jordan, in 2016, and 2017. Two courses (Dental Anatomy and Operative Dentistry) were selected. Corre-lations comparing the practical grades of Dental Anatomy course for first year students, and the practical grades of Operative Dentistry course for the same students in fourth and fifth years. Statistically significant positive correlation was found between the soap carving grades of first-year dental students and their practical grades in Operative Dentistry course during fourth and fifth years. Also, statistically significant strong positive correlation was found between the grades of fourth-year practical Operative Dentistry and the grades of fifth-year practical Operative Dentistry. The clinical performance of dental students in their practical courses in fourth and fifth years can be predicted from their soap carving grades at their first year in Dental School.

RESUMEN: Las habilidades manuales forman solo una parte de las capacidades requeridas para un futuro dentista. Sin embargo, son componentes muy importantes que deben ser probados. El objetivo de este estudio fue investigar si existe una correlación entre las calificaciones de los estudiantes de odontología en los cursos preclínicos y su desempeño clínico. Los grados preclínicos / clínicos se obtuvieron para los estudiantes de primero, cuarto y quinto año, graduados de la Facultad de Odontología, de la Universidad de Jordania, Amman, Jordania, en 2016 y 2017. Se seleccionaron dos cursos (Anatomía Dental y Odontología Operativa). Correlaciones que comparan los grados prácticos del curso de Anatomía Dental para estudiantes de primer año y las notas de calificación prácticas del curso de Odontología Operativa para los mismos estudiantes en cuarto y quinto año. Se encontró una correlación positiva estadísticamente significativa, entre las notas de tallado de jabón de los estudiantes de primer año de odontología y sus notas de calificación prácticas en el curso de Odontología Operativa durante el cuarto y quinto años. Además, se encontró una fuerte correlación positiva estadísticamente significativa entre las notas de calificación en Odontología Operativa práctica de cuarto año y los grados de Odontología Operativa práctica de quinto año. El rendimiento clínico de los estudiantes de odontología en sus cursos prácticos en cuarto y quinto año se puede predecir a partir de las calificaciones en tallado de jabón durante su primer año en la Escuela de Odontología.

Investigation of zero TE MR in preoperative planning in dentistry.

Preoperative planning in dentistry relies on imaging to assess the separation between the teeth and mandibular canal. Cone beam CT(CBCT) shows inferior contrast of the mandible canal and features radiation. In this work, the use of zero TE (zTE) imaging as an alternative to CBCT imaging for preoperative planning in dentistry is investigated. Twenty-two patients (11 males, 11 females, age 26-65) were enrolled in this prospective study. The performance of zTE imaging was assessed using CBCT as a gold standard in preoperative planning for tooth extraction (qualitative classification) and implanting (quantitative dimensional measurement). Zero TE imaging showed clear delineation of teeth and mandible, and showed better depiction of the mandible canal as compared to CBCT. In assessing the spatial relationship between the third molar and the mandibular canal, identical results were obtained from two readers based on zTE and CBCT images; in spatial measurements related to the second premolar, high intraclass coefficient was obtained in all the performed measurements between zTE and CBCT (0.782 to 0.921) and between reviewers (0.812 to 0.958). The results of Bland Altman analysis also indicated low level of bias (max -1.8%) and disagreements (max -15.1% to 11.3%) between the results of zTE and CBCT. Zero TE imaging may be a potential imaging tool in preoperative planning in dentistry when CBCT is undesirable.

Impact of odontogenic chronic rhinosinusitis on general health-related quality of life.

Chronic rhinosinusitis (CRS) may arise due to odontogenic etiologies. However, it is unknown whether odontogenic CRS has a differential impact on patients' quality of life (QOL) compared to standard, inflammatory (but non-odontogenic) CRS. The objective of this study was to determine whether there is a difference in the impact of sinonasal symptomatology on general health-related QOL in odontogenic CRS compared to non-odontogenic CRS. This was a retrospective review of 21 odontogenic CRS patients who visited our tertiary care center. The severity of sinonasal symptomatology and CRS-specific QOL detriment was measured using the 22-item Sinonasal Outcomes Test (SNOT-22) and general health-related QOL was measured using the health utility index from the 5-item EuroQol survey (EQ-5D HUV). Compared to non-odontogenic CRS, odontogenic CRS was not associated with a difference in SNOT-22 score [linear regression coefficient (ß) = - 1.57, 95% CI - 12.47 to 9.32, p = 0.777] but was significantly associated with decreased EQ-5D HUV (ß = - 0.10, 95% CI - 0.17 to - 0.03, p = 0.008). We also found that the magnitude of association (ß) between SNOT-22 and EQ5D-HUV was greater for odontogenic CRS patients compared to non-odontogenic CRS patients (p = 0.045). Our findings suggest sinonasal symptoms may have a greater impact on general QOL in odontogenic CRS compared to non-odontogenic CRS. The reason for this remains unknown, but deserves further study.

[Perfecting smile esthetics: keep it pink!] / Comment parfaire l'esthétique du sourire : toujours en rose !

INTRODUCTION: Smile aesthetics is based on numerical, physical, physiological and psychological data regarding beauty, while taking into account the desires of the patient. It is determined by the shape, colour and position of the lips, teeth and gingival tissues. Periodontal examination in both the facial and labial settings supports analysis of the gingival display during natural and forced smiling, the health of the periodontium, the gingival contours, the aesthetic gingival line, and the presence of the papillae. MATERIALS AND METHODS: All these data will help establish a gingival aesthetic score to determine the causes of disharmony and possible treatment. DISCUSSION: During implementation of the global orthodontic treatment plan, periodontal plastic surgery can change the gingival appearance and morphology in order to restore the harmony of the smile. Subtractive periodontal plastic surgery treats biological space defects and excess tissue during incomplete passive eruption by gingivectomy or apically positioned flap, combined, or not, with osteoplasty or osteoectomy. Finally, injections of hyaluronic acid in the papillae can plump them up and minimize the size of any black holes.

Contemporary exodontia.

Exodontia is a cardinal skill of all dentists. Patients expect extractions to be skillfully and painlessly accomplished every time. It's not necessarily so simple and can be challenging. In this paper we explore contemporary issues of the full process of exodontia including diagnosis, technique, complication minimization as well as management of medically compromised patients with appropriate post-operative care, including pharmacotherapy.

3D cone beam computed tomography reconstruction images in diagnosis of ameloblastomas of lower jaw: A case report and mini review.

Cone beam computed tomography (CBCT) has obvious advantages over regular radiography in diagnosis of complex diseases. Objective of this study is to report a case of a mandibular jaw ameloblastoma recurring cyst, which represents a benign tumor of odontogenic epithelium, using CBCT imaging technology. CBCT examination of the patient suffering with recurrent lower jaw cyst (relapsing four years after surgery) showed a decrease in irregular bone density and appearance of a honeycomb pattern (3.5 cm×2.5 cm×1.8 cm) in the right lower jaw. This suggests that the lesion is more likely to be an ameloblastoma. Preoperative tissue biopsy and pathological examination of surgical sample confirmed the diagnosis. Surgical resection of the diseased tissue and autogenous bone grafting in the mandible was performed. Postoperative CBCT examination showed that the bone defect healed well, without recurrence of the tumor 22 months postoperatively. In conclusion, the rotated 3D CBCT images clearly displays the exact size, location, borders and internal changes of the tumor in the jaw cyst itself and the adjacent tissues. Thus, the dental CBCT allows clinicians to better evaluate lesions, leading to better treatment outcomes.