Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

Clinical efficacy of intraoral ultrasonography versus transgingival probing for measurement of gingival thickness in different gingival biotypes: a clinical trial.

BACKGROUND: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes. MATERIALS AND METHODS: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC). RESULTS: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement. CONCLUSION: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT. TRIAL REGISTRATION: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1).

Evaluation of Bone Growth around Autotransplanted Teeth Using Cone-Beam Computed Tomographic Images.

INTRODUCTION: The aim of this observational study was to evaluate bone growth at the recipient site of autotransplanted teeth using cone-beam computed tomography (CBCT) images and to compare it to the control tooth. METHODS: Bone growth was measured on CBCT images obtained from the anterior region of the maxilla, which received a single transplant of immature premolars due to early loss of the central incisor. The results were compared to the bone growth of contralateral central incisor that served as control. The sample consisted of 13 autotransplanted teeth and 13 control teeth. It was determined the thickness of the buccal bone of the marginal ridge, the thickness of the palatal bone of the marginal ridge, the height of the maxillary bone, and the thickness of the maxillary bone at its mid-height. The measurements were analyzed statistically, adopting a significance level of 5%. RESULTS: The mean interval between the dental autotransplantation surgery and the CBCT scan was 16.2 years. The mean thickness of the buccal bone of the marginal ridge, thickness of the palatal bone of the marginal ridge, height of the maxillary bone, and thickness of the maxillary bone at its mid-height were, respectively, 0.85, 0.94, 19.6, and 8.85 mm for autotransplanted teeth and 0.79, 1.09, 18.88, and 8.5 mm for control teeth. There were no significant differences in the bone measurements between autotransplanted and control teeth (P > .05). CONCLUSIONS: The growth of maxillary bone in the region that received the autotransplanted tooth was proportional to that of maxillary bone that supports the contralateral tooth. Thus, autogenous transplantation is efficient in maintaining the bone architecture at the recipient site.

Clinical analysis of nonsyndromic oligodontia phenotypes.

OBJECTIVES: To provide references, this study investigated the clinical characteristics of patients with nonsyndromic oligodontia. METHODS: The information of 178 patients with oligodontia was collected, including histories, oral examinations, and panoramic radiographs. Tooth agenesis characteristics were calculated and evaluated. All the data were statistically analyzed with SPSS 24.0 software. RESULTS: No significant difference in the number of missing teeth was found between sexes nor between the right and left sides, and congenitally missing teeth affected the maxillary arch (P<0.05). The highest prevalence of tooth agenesis was observed in the mandibular second premolars. In the maxillary arch, the most common pattern of tooth agenesis was agenesis of the bilateral first and second premolars. The agenesis of the bilateral second premolars was observed in the mandibular arch. The prevalence of a symmetric pattern between the right and left quadrants was significantly higher than that of matched patterns between the maxillary and mandibular antagonistic quadrants. Approximately 16.85% of patients with nonsyndromic oligodontia were affected by other tooth-related anomalies. CONCLUSIONS: The common patterns of tooth agenesis were successfully identified in patients with nonsyndromic oligodontia. Dentists need to provide multidisciplinary treatments for patients with nonsyndromic oligodontia because of variations in occluding and full-mouth tooth agenesis patterns.

Minimally invasive surgical removal of bilateral impacted mandibular supernumerary teeth using 3D surgical guide template: a case report.

Impacted supernumerary teeth are defined as the presence of one or more teeth in a patient's upper and lower jaws in addition to the normal number of teeth in the dental arch. It has an incidence rate of approximately 1%-14% and more frequently occurs in males than females, may be single or multiple, unilateral or bilateral, erupted or impacted. In this article, we describe the case of a patient with two supernumerary teeth between the roots of the mandibular second premolar and the first molar, which influenced the effectiveness of the first orthodontic treatment. The special anatomical position of the complex supernumerary teeth made tooth extraction challenging. Given the higher risk status of surgery, we implemented a novel tooth extracting technique for this patient. Thus, in this study, we describe a case of minimally invasive extraction of bilateral mandibular impacted supernumerary teeth using a digital 3D positioning guide plate.

Robot-Assisted and Haptic-Guided Endodontic Surgery: A Case Report.

There has been a significant increase in robot-assisted dental procedures in the past decade, particularly in the area of robot-assisted implant placement. The objective of this case report was to assess the initial use of the Yomi Robot's assistance and haptic guidance during endodontic microsurgery. The robot was used during the osteotomy and root-end resection of the first and second upper left premolars. The report aims to inform clinicians of the initial implementation of this cutting-edge technology in endodontics and its potential to enhance endodontic microsurgery. The Yomi Robot was used in performing osteotomy and root-end resection during apical surgery in a patient presenting with symptomatic upper left first and second premolars. The treatment procedure was decided after clinical examination, chart data, and radiographic examinations, which showed periapical lesions on both premolars, taking into consideration the failed endodontic retreatment on the first premolar, the post and ceramic coronal restorations on both teeth, and the desire of the patient to save them. The Yomi Robot system provides auditory, visual, and physical guidance to clinicians during surgery while using a cone-beam computed tomography scan for precision planning with greater accuracy and minimized potential for human error. Further studies are needed to prepare a protocol for robotic-guided procedures in endodontics.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth.

BACKGROUND: High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods. MATERIALS AND METHODS: Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery. RESULTS: The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff. CONCLUSIONS: The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

An evaluation of 910 premolars transplanted in the anterior region-A retrospective analysis of survival, success, and complications.

AIM: The aim this retrospective analysis was to evaluate the survival, success and possible complications of transplanted premolars to the anterior region subdivided in development stage and patient's age. MATERIALS AND METHODS: The material comprised patients that underwent a tooth transplantation between April 2004 and December 2021. A total of 910 premolars were transplanted in 707 patients. Tooth mobility, oral hygiene, and periodontal parameters were clinically evaluated. Standardized radiographs were used to evaluate pulpal and periodontal healing and root formation. The cumulative survival rate was calculated using the Kaplan-Meier method. RESULTS: The data were subdivided in three groups based on the stage of root development and patient's age. The average age at surgery was 16 years. The main indication for transplantation was trauma, followed by agenesis and other indications. Two premolars were lost during the whole observation period. The overall survival and success in the immature premolars group after an observation period of 10 years was 99.8%. The 10-year survival and success rate when fully developed premolars were transplanted in the anterior region in adolescents were 100% and 96.3%, respectively. In adults, the 10-year survival and success rate were 87.5%. CONCLUSION: Transplantation of premolars with developing and fully developed roots to the anterior region in children, adolescents, and adults is a predictable treatment modality.

Automated artificial intelligence-based three-dimensional comparison of orthodontic treatment outcomes with and without piezocision surgery.

OBJECTIVE(S): This study aims to evaluate the influence of the piezocision surgery in the orthodontic biomechanics, as well as in the magnitude and direction of tooth movement in the mandibular arch using novel artificial intelligence (AI)-automated tools. MATERIALS AND METHODS: Nineteen patients, who had piezocision performed in the lower arch at the beginning of treatment with the goal of accelerating tooth movement, were compared to 19 patients who did not receive piezocision. Cone beam computed tomography (CBCT) and intraoral scans (IOS) were acquired before and after orthodontic treatment. AI-automated dental tools were used to segment and locate landmarks in dental crowns from IOS and root canals from CBCT scans to quantify 3D tooth movement. Differences in mesial-distal, buccolingual, intrusion and extrusion linear movements, as well as tooth long axis angulation and rotation were compared. RESULTS: The treatment time for the control and experimental groups were 13.2 ± 5.06 and 13 ± 5.52 months respectively (P = .176). Overall, anterior and posterior tooth movement presented similar 3D linear and angular changes in the groups. The piezocision group demonstrated greater (P = .01) mesial long axis angulation of lower right first premolar (4.4 ± 6°) compared with control group (0.02 ± 4.9°), while the mesial rotation was significantly smaller (P = .008) in the experimental group (0.5 ± 7.8°) than in the control (8.5 ± 9.8°) considering the same tooth. CONCLUSION: The open source-automated dental tools facilitated the clinicians' assessment of piezocision treatment outcomes. The piezocision surgery prior to the orthodontic treatment did not decrease the treatment time and did not influence in the orthodontic biomechanics, leading to similar tooth movements compared to conventional treatment.

Autotransplantation for Restoration of Dentition Defects After Excision of Jaw Cysts.

Bone defect caused by jaw cystectomy has always been the main factor affecting postoperative wound healing and is also the common cause of maxillofacial bone defect, which brings challenges to the subsequent restoration of missing teeth. In this paper, the authors report a 22-year-old young woman who had a mandibular cyst in the left lower posterior tooth area. She underwent mandibular bone cyst excision and simultaneous extraction of teeth 36 and 37. One and two months after the removal of the mandibular bone cyst, autologous tooth transplantation was performed in stages from tooth 28 to tooth 36 and from tooth 18 to tooth 37. The case shows that tooth autotransplantation is a viable option for the restoration of dentition defects after the excision of jaw cysts, which can promote the healing of the bone defect after the operation.

Assessment of Efficiency of Bioactive Glass, Self-Assembling Peptide, and Ozone Remineralising Agents on Artificial Carious Lesion

ABSTRACT Objective: To assess the efficacy of bioactive glass, self-assembling peptide, and ozone-remineralizing agents on the artificial carious lesion. Material and Methods: On the extracted 60 premolar teeth, an artificial carious lesion/demineralization was created. Later, the remineralization of demineralized teeth was done with respective remineralizing agents (Group A: Calcium sodium phosphosilicate (bioactive glass), Group B: Self-assembling peptide, Group C: Ozone remineralizing agents and Group D (Control): De ionized water. The degree of demineralization and remineralization were evaluated using the Vickers Hardness Number. Results: There was a decrease in microhardness from baseline to demineralization in all the groups, and this reduction was found to be statistically considerable. After the remineralization of demineralized samples with respective remineralizing agents, there was an increase in microhardness of 312.38, 276.67, and 254.42 in groups A, B, and C, respectively. In contrast, in Group D, there were no changes. Conclusion: Bioactive glass and self-assembling peptides had higher remineralizing capacities, which can be used to treat early carious lesions.

A retrospective study of dynamic navigation system-assisted implant placement.

BACKGROUND: To evaluate the accuracy of implant placement assisted by a dynamic navigation system, as well as its influencing factors and learning curve. METHODS: At Macao We Care Dental Center, 55 cases of implant placement using dynamic navigation were retrospectively evaluated. To evaluate their accuracy, the apex, tip, and angle deviations of preoperatively planned and postoperatively placed implants were measured. The effects of the upper and lower jaws, different sites or lateral locations of dental implants, and the length and diameter of the implants on accuracy were analyzed, as well as the variation in accuracy with the increase in the number of surgical procedures performed by dentists. RESULTS: The implant had an apex deviation of 1.60 ± 0.94 mm, a tip deviation of 1.83 ± 1.03 mm, and an angle deviation of 3.80 ± 2.09 mm. Statistical differences were observed in the tip deviation of implants at different positions based on three factors: jaw position, lateral location, and tooth position (P < 0.05). The tip deviation of the anterior teeth area was significantly greater than those of the premolar and molar areas. There were no statistically significant differences in apex deviation, tip deviation, or angle deviation between the implants of different diameters and lengths (P > 0.05). There were significant differences in the angle deviation between the final 27 implants and the first 28 implants. Learning curve analysis revealed that angle deviation was negatively correlated with the number of surgical procedures, whereas the regression of apex deviation and tip deviation did not differ statistically. CONCLUSIONS: The accuracy of dynamic navigation-assisted dental implants meets the clinical needs and is higher than that of traditional implants. Different jaw positions, lateral locations, and implant diameters and lengths had no effect on the accuracy of the dental implants guided by the dynamic navigation system. The anterior teeth area had a larger tip deviation than the posterior teeth area did. As the number of dynamic implantation procedures performed by the same implant doctor increased, the angle deviation gradually decreased.

Comportamiento Mecánico de un Premolar Humano Sano Sometido a Fuerzas Funcionales y Disfuncionales en un MEF / Mechanical Behavior of a Healthy Human Premolar Subjected to Functional and Dysfunctional Forces in a FEM

El propósito de este estudio fue analizar el comportamiento mecánico de la estructura dental sana de un primer premolar inferior humano sometido a fuerzas funcionales y disfuncionales en diferentes direcciones. Se buscó comprender, bajo las variables contempladas, las zonas de concentración de esfuerzos que conllevan al daño estructural de sus constituyentes y tejidos adyacentes. Se realizó el modelo 3D de la reconstrucción de un archivo TAC de un primer premolar inferior, que incluyó esmalte, dentina, ligamento periodontal y hueso alveolar considerando tres variables: dirección, magnitud y área de la fuerza aplicada. La dirección fue dirigida en tres vectores (vertical, tangencial y horizontal) bajo cuatro magnitudes, una funcional de 35 N y tres disfuncionales de 170, 310 y 445 N, aplicadas sobre un área de la cara oclusal y/o vestibular del premolar que involucró tres contactos estabilizadores (A, B y C) y dos paradores de cierre. Los resultados obtenidos explican el fenómeno de combinar tres vectores, cuatro magnitudes y un área de aplicación de la fuerza, donde los valores de esfuerzo efectivo equivalente Von Mises muestran valores máximos a partir de los 60 MPa. Los valores de tensión máximos se localizan, bajo la carga horizontal a 170 N y en el proceso masticatorio en la zona cervical, cuando la fuerza pasa del 60 %. Sobre la base de los hallazgos de este estudio, se puede concluir que la reacción de los tejidos a fuerzas funcionales y disfuncionales varía de acuerdo con la magnitud, dirección y área de aplicación de la fuerza. Los valores de tensión resultan ser más altos bajo la aplicación de fuerzas disfuncionales tanto en magnitud como en dirección, produciendo esfuerzos tensiles significativos para la estructura dental y periodontal cervical, mientras que, bajo las cargas funcionales aplicadas en cualquier dirección, no se generan esfuerzos lesivos. Esto supone el reconocimiento del poder de detrimento estructural del diente y periodonto frente al bruxismo céntrico y excéntrico.

SUMMARY: The purpose of this study was to analyze the mechanical behavior of the healthy dental structure of a human mandibular first premolar subjected to functional and dysfunctional forces in different directions. It was sought to understand, under the contemplated variables, the areas of stress concentration that lead to structural damage of its constituents and adjacent tissues. The 3D model of the reconstruction of a CT file of a lower first premolar was made, which included enamel, dentin, periodontal ligament and alveolar bone considering three variables: direction, magnitude and area of the applied force. The direction was directed in three vectors (vertical, tangential and horizontal) under four magnitudes, one functional of 35 N and three dysfunctional of 170, 310 and 445 N, applied to an area of the occlusal and/or buccal face of the premolar that involved three stabilizing contacts (A, B and C) and two closing stops. The results obtained explain the phenomenon of combining three vectors, four magnitudes and an area of force application, where the values of effective equivalent Von Mises stress show maximum values from 60 MPa. The maximum tension values are located under the horizontal load at 170 N and in the masticatory process in the cervical area, when the force exceeds 60%. Based on the findings of this study, it can be concluded that the reaction of tissues to functional and dysfunctional forces varies according to the magnitude, direction, and area of application of the force. The stress values turn out to be higher under the application of dysfunctional forces both in magnitude and in direction, producing significant tensile stresses for the dental and cervical periodontal structure, while under functional loads applied in any direction, no damaging stresses are generated. This supposes the recognition of the power of structural detriment of the tooth and periodontium against centric and eccentric bruxism.

Prevalence of and Factors Associated With Vertical Root Fracture in a Japanese Population: An Observational Study on Teeth With Isolated Periodontal Probing Depth.

INTRODUCTION: Previous studies on the prevalence of vertical root fractures (VRFs) were based on extracted teeth, or teeth referred for apical surgery. This study examined teeth with an isolated periodontal probing depth (PD) as an indicator of VRF. The primary aim of this study was to investigate the prevalence of vertical root fracture (VRF) and non-VRF among teeth with an isolated probing depth (PD) ≥ 5 mm. The secondary aim was to assess factors associated with VRF by comparing the teeth with and without VRF in the Japanese population. METHODS: A total of 288 teeth with an isolated PD ≥ 5 mm were grouped pathologically into 8 groups comprising VRF and non-VRF conditions. A descriptive analysis for age, sex, tooth type, endodontically treated teeth (ETT) versus non-ETT, proximal contacts, PD (depth), PD (broadness and location), restoration type, and presence of a post was performed. Moreover, the associations between these factors and VRFs were investigated using the Chi-square test. RESULTS: The prevalence of VRF was 32%. Lower first molars were the most common tooth type in both VRF (31.5%) and non-VRF groups (29.7%), while premolars were exclusively frequent in VRF (30.2%) and not frequent in non-VRF (7.8%). Narrow buccolingual PD was common in VRF (78.1%) whereas wide PD was frequent in non-VRF (67.1%). ETT, narrow buccolingual PD, tooth type (premolars), restoration type (crown), and the presence of a post showed significant associations with VRF (P ≤ .001). CONCLUSIONS: VRFs may be more prevalent in ETT among the Japanese. Careful assessment is necessary to differentiate VRFs from other conditions when the lower first molars show an isolated PD ≥ 5 mm. When an endodontically treated premolar with a post shows a narrow buccolingual PD, the probability of a VRF may be greater than in other tooth types.

Artificial intelligence in diagnosing dens evaginatus on periapical radiography with limited data availability.

This study aimed to develop an artificial intelligence (AI) model using deep learning techniques to diagnose dens evaginatus (DE) on periapical radiography (PA) and compare its performance with endodontist evaluations. In total, 402 PA images (138 DE and 264 normal cases) were used. A pre-trained ResNet model, which had the highest AUC of 0.878, was selected due to the small number of data. The PA images were handled in both the full (F model) and cropped (C model) models. There were no significant statistical differences between the C and F model in AI, while there were in endodontists (p = 0.753 and 0.04 in AUC, respectively). The AI model exhibited superior AUC in both the F and C models compared to endodontists. Cohen's kappa demonstrated a substantial level of agreement for the AI model (0.774 in the F model and 0.684 in C) and fair agreement for specialists. The AI's judgment was also based on the coronal pulp area on full PA, as shown by the class activation map. Therefore, these findings suggest that the AI model can improve diagnostic accuracy and support clinicians in diagnosing DE on PA, improving the long-term prognosis of the tooth.

Avaliação da profundidade da cárie proximal nos exames radiográfico convencional e digitalizado / Evaluation of the size of proximal caries in radiography and digitized

Introdução: A cárie dentária é uma doença multifatorial que compreende vários fatores biológicos e sociais. A superfície proximal dos dentes é uma região de difícil visualização que pode esconder pequenas lesões cariosas no esmalte dentário, impossibilitando o diagnóstico através de inspeções visuais e táteis. Objetivo: O objetivo deste trabalho foi avaliar a profundidade da cárie proximal nos exames radiográficos convencionais e digitais, comparando as profundidades das lesões consideradas nestes exames às do exame histológico. Método: Foram utilizados exames radiográficos interproximais de 40 dentes humanos, 20 pré-molares e 20 molares, com alterações clínicas em uma das superfícies proximais, como lesões de mancha branca ou acastanhada e pequenas cavitações. Três profissionais especializados em radiologia odontológica com mais de cinco anos de experiência clínica mediram a profundidade das lesões pelos exames radiográfico e digital das amostras. Para obter os resultados, utilizou-se a técnica de análise de variância (ANOVA). Resultados: Constatou-se um nível de significância de 5% nas mensurações dos exames radiográficos convencionais e digitalizados, mostrando a fidelidade das imagens radiográficas em relação a real profundidade da lesão. Conclusão: Conclui-se que os exames de imagem avaliados foram eficientes na determinação da profundidade das lesões de cárie proximal.

Introduction: Dental caries is a multifactorial disease that comprises several biological and social factors. The proximal surface of the teeth is a region of difficult visualization that can hide small carious lesions in the dental enamel, making diagnosis through visual and tactile inspection infeasible. Objective: The objective of this study was to evaluate the depth of proximal caries in the conventional and digitized radiographic examinations, comparing the depths of the lesions considered in these examinations to those of the histological examination. Method: Interproximal radiographic examinations of 40 human teeth, 20 premolars and 20 molars, with clinical alterations on one of the proximal surfaces, such as white or brown spot lesions and small cavitations, were used. Three professionals specialized in dental radiology with more than five years of clinical experience measured the depth of the lesions by radiographic examination of the samples. To obtain the results, we used the technique of analysis of variance (ANOVA). Results: A level of significance of 5% was found in conventional and digitized radiographic measurements, showing the fidelity of the radiographic images in relation to the actual depth of the lesion. Conclusion: It was concluded that the imaging tests evaluated were efficient in determining the depth of proximal caries lesions.

Influencia de la Morfología Externa de la Raíz de Primeros Premolares Superiores en la Sobreestimación del Espesor Radiográfico Radicular Durante la Preparación para Poste, Evaluados Mediante Tomografía Computarizada Cone Beam / Influence of the External Morphology of the Root of Upper First Premolars on the Overestimation of Radiographic Root Thickness During Post Preparation, Evaluated by Cone Beam Computed Tomography

La investigación tuvo como objetivo determinar la influencia de la morfología externa de la raíz de primeros premolares superiores en la existencia de sobreestimación radiográfica durante la preparación para poste. Con este fin se realizó un estudio transversal in vitro, donde 60 premolares superiores uniradiculares fueron instrumentadas con fresas Gates Glidden y Pesso de calibre 1, 2 y 3. Seguidamente se obtuvieron imágenes radiográficas digitales de cada pieza dentaria mediante un aparato posicionador a una distancia constante en sentido vestíbulo lingual, asimismo se realizaron imágenes tomográficas volumétricas de las muestras. En ambas técnicas imagenológicas se midió el espesor a mesial y distal de las piezas. La sobreestimación fue calculada mediante la diferencia de la medida tomográfica menos la radiográfica. Los resultados indicaron que en ambas paredes radiculares hubo diferencia significativa entre las medidas radiográficas y tomográficas (p<0,05), encontrándose en la pared distal diferencias altamente significativas (p<0,001); además se evidenció que la sobreestimación radiográfica fue mayor en la pared distal. El estudio concluyó que existe sobreestimación radiográfica en premolares superiores durante la preparación para poste de un 20,42 % en promedio, siendo la pared distal la estructura que presenta mayor sobreestimación.

SUMMARY: he investigation´s objective was to determine the influence of external morphology of the root of upper first premolars in the existence of radiographic overestimation during preparation for post. An in vitro cross-sectional study was carried out, where 60 single-rooted upper premolars were instrumented with burs. Gates Glidden and Pesso of caliber 1, 2 and 3, then, digital radiographic images of each dental piece were obtained by means of a positioning device at a constant distance in the buccolingual direction; volumetric tomographic images of the samples were also performed. In both imaging techniques, the mesial and distal thickness of the pieces was measured. The overestimation was calculated by the difference of the tomographic measurement minus the radiographic one. The results indicated that in both root walls there was a significant difference between the radiographic and tomographic measurements (p<0.05), with highly significant differences being found in the distal wall (p<0.001); In addition, it was evidenced that the radiographic overestimation was greater in the distal wall. The study concluded that there is radiographic overestimation in upper premolars during post preparation of 20.42% on average, with the distal wall being the structure that presents the greatest overestimation.

Benefícios do planejamento digital para cirurgias periodontais estéticas: relato de caso / Benefits of digital planning for esthetic periodontal surgeries: case report

Sorriso gengival é comumente conhecido pela exposição excessiva das gengivas ao sorrir, acarretando assim na diminuição das coroas dos elementos. No que tange a etiologia dessa condição, ela se apresenta de maneiras diversas e sua identificação é fundamental para o desenvolvimento de um plano de tratamento eficaz. O planejamento clínico pode ser feito usando uma abordagem dinâmica e digital do sorriso, como softwares, exames de imagem, modelos virtuais 3D e guias cirúrgicos, melhorando a qualidade e precisão do tratamento, oferecendo diversos benefícios aos pacientes. Sendo assim esse estudo teve como objetivo demonstrar a importância dos processos digitais no planejamento e correção do sorriso gengival. Paciente queixou-se da desproporção do sorriso, caracterizado por coroas curtas nas regiões de pré-molares e incisivos ligadamente com a exposição excessiva da gengiva ao sorrir. Após estudos clínicos e de imagem, a etiologia foi diagnosticada como erupção passiva alterada, tipo I (fenótipo espesso). O tratamento de escolha foi o remodelamento gengival associado à osteotomia e osteoplastia obtendo assim uma maior precisão no tratamento, sendo confeccionado um guia cirúrgico duplo. Sendo assim, é possível contemplar que o planejamento digital permite uma maior previsibilidade da execução, compatibilidade em relação a expectativa do paciente e profissional, além da total individualização do caso, tornando os resultados mais favoráveis e exatos e minimizando as chances de iatrogenias(AU)

Gummy smile is commonly known for exposing the gums to the smile, thereby increasing the crowns elevation of the elements. Regarding a condition, it presents itself in different ways and its identification is fundamental for the development of a treatment plan. The clinician can be done using a dynamic and digital approach to image treatment, such as software, imaging exams, various 3D virtual models and elaborate guides, improving the quality and precision of treatment, offering benefits to patients. Therefore, this study aimed to demonstrate the importance of digital processes in planning and correcting the gummy smile. Patient complained of disproportion of the smile, facing the regions of premolar crowns and incisors of the smile, facing the exposure of the gingiva when smiling. After clinical and imaging exams, the diagnostic studies were diagnosed as passive eruption, type I (phenotype and specific). The choice of choice was remodeling associated with surgery treatment and surgery treatment, thus providing a greater precision in the treatment, being a double guide elaborated. Therefore, it is possible that the digital is possible a predictability of execution, compatibility in relation to patient and professional care, in addition to the greater possibility of individualization planning than it allows, making the results more planned as possibilities and exactly the iatrogenic(AU)

Lobodontia in the primary and permanent dentition: a condition requiring individualized care.

Lobodontia is a rarely documented dental condition associated with pointed or conical cusps on premolars and canines, multitubercular occlusal surfaces on molar teeth, and irregularly shaped incisors. Information on this uncommon condition continues to be scarce, with particularly little information available on the primary dentition. The purpose of this article is to describe 6 cases of lobodontia and discuss the variability in presentation and management. Previously unreported manifestations in the primary dentition are included. The cases described in the current study demonstrate the spectrum of clinical and radiographic features of the condition, and show that a varied, individualized approach to treatment is necessary.

La lobodontie est une affection dentaire rarement documentée liée à des cuspides pointues ou coniques sur les prémolaires et les canines, à des molaires ayant des surfaces occlusales multituberculées et à des incisives de forme irrégulière. Les informations sur cette affection peu courante continuent à être rares, notamment en ce qui concerne la dentition primaire. L'objectif de cet article est de décrire 6 cas de lobodontie et de discuter de la variabilité en matière de présentation et de gestion. Des manifestations de la dentition primaire qui n'avaient pas été déclarées auparavant sont incluses. Les cas décrits dans la présente étude illustrent le spectre des caractéristiques cliniques et radiographiques de cette affection et montrent que le traitement nécessite une approche variée et personnalisée.