Therapeutic solutions for discoloration of calcified teeth based on CBCT diagnosis.

Single tooth orange discoloration secondary to root canal calcification occurs as a consequence of dental trauma, orthodontic treatment, or for unknown rea- sons. A correct case history must be compiled and a CBCT study carried out in order to establish the diag- nosis and define the best treatment plan in each case. The aim of the present study was to offer a therapeutic protocol involving a clinical decision-making tree dia- gram based on the presence or absence of apical dis- ease and the degree of canal calcification. Dental bleaching and the use of ceramic veneers allow es- thetic restoration in such cases.

Effect of enamel surface coating on staining capability due to iron containing supplements on primary teeth: An in vitro study.

Background: Iron supplements prescribed to anemic children may results in teeth staining. Possible methods for preventing staining of primary teeth following exposure to iron supplements are need of an hour. Aim: This study was conducted with the aim to assess effect of enamel surface coating on staining capability of iron containing supplements in primary teeth. Settings and Design: This is an in vitro Experimental study. Methods: Hundred and forty-four primary incisors with intact crowns were sequentially numbered and randomly divided into four main groups of 36 samples receiving different enamel surface coating such as no surface coating, MI fluoride varnish™, GC G-coat Plus™ and GC-Equia®-forte-coat. Each group was subdivided into two groups, namely A (sound teeth) and B (artificially demineralized teeth). All the samples were immersed in 250 ml artificial saliva containing 10 ml of iron supplement to make the iron concentration 100 mg. The shade of the teeth was measured at baseline and at 90 days, using VITA Easy shade® V digital spectrophotometer. The data was statistically analyzed using the Kruskal-Wallis test and Mann-Whitney U test. Descriptive and inferential statistical analyses was made via SPSS 23. Results: Overall color change was found to be significantly less at the end of 90th day in sound samples when GC-Equia®-forte-coat was used as an enamel surface coating with pvalue of 0.017. In demineralized samples the overall color change was least at the end of 90th day when MI Varnish™ used as an enamel surface coating with P = 0.042. Conclusions: GC-Equia®-forte-coat, MI Varnish™ and GC-G-coat-plus™ can be used as a preventive or a precautionary measure to minimizes the staining of teeth. The amount of color change at the end of 90 days with GC-Equia®-forte-coat was least followed by MI varnish™, GC G coat Plus™ and control group.

Effects of aerosols from heated tobacco products with flavors on the discoloration of bovine tooth enamel.

OBJECTIVES: This in vitro study assessed the potential of tooth discoloration by aerosols generated from three heated tobacco products (HTPs) with different specifications: in-direct heating tobacco system platform 1.0a (IT1.0a), in-direct heating tobacco system platform 2.0a (IT2.0a), and direct heating tobacco system platform 3.0a (DT3.0a). In addition, three flavor types (regular, menthol, and berry menthol) were selected for each HTP to characterize the effect of flavor types on tooth discoloration. MATERIAL AND METHODS: Six bovine tooth samples were exposed directly to aerosols generated from one pack of each HTP: 350 puffs for IT1.0a, 325 puffs for IT2.0a, and 220 puffs for DT3.0a. Six bovine tooth samples were also exposed to air (350 puffs) and smoke generated from one pack of cigarettes (160 puffs) as negative and positive controls, respectively. The color of each tooth sample was measured before and after exposure. The overall color changes were assessed using overall color differences (ΔE) calculated according to the Commission International de I'Eclairage color system. A one-way analysis of variance followed by Tukey's post hoc test was used to compare ΔE among bovine tooth samples exposed to air, cigarette smoke, and aerosols generated from each HTP. RESULTS: ΔE values for tooth samples exposed to air and aerosols generated from the three HTPs (IT1.0a, IT2.0a, and DT3.0a) were significantly lower than ΔE value for tooth samples exposed to cigarette smoke. ΔE values obtained with DT3.0a were significantly higher than those obtained with air-exposed control samples. However, ΔE values obtained with IT1.0a and IT2.0a were not significantly different from that obtained with air-exposed control samples. No HTPs showed significant differences in ΔE values among the three flavor types. CONCLUSIONS: This study showed that HTP aerosols reduce tooth discoloration potential compared with cigarette smoke, regardless of flavor types, and the tooth discoloration potential of the product may depend on product specifications.

Comparison of the plaque regrowth inhibition effects of oil pulling therapy with sesame oil or coconut oil using 4-day plaque regrowth study model: A randomized crossover clinical trial.

OBJECTIVES: The aim of this study was to compare the plaque-inhibiting effects of oil pulling therapy with sesame oil or coconut oil using 4-day plaque regrowth study model. METHODS: This clinical observer-masked, randomized, crossover designed study involved 24 participants. The participants received professional prophylaxis in the preparatory period and after that subjects started to use the allocated mouthrinse (coconut oil or sesame oil). On day 5, periodontal clinical parameters including plaque index (PI), gingival index (GI), stain index (SI) and bleeding on probing (BOP) were recorded. Subjects underwent a 14-day wash out period and then used the other mouthrinse for 4 days. RESULTS: Oil pulling therapy with coconut oil or sesame oil exhibited similar plaque regrowth inhibition (PI = 1.60 ± 0.28 and 1.49 ± 0.22, for oil pulling with coconut oil and sesame oil, respectively) and tooth staining (SI = 0.20 ± 0.11 and 0.21 ± 0.09, for oil pulling with coconut oil and sesame oil, respectively.) In addition, GI and BOP were similar in both groups (GI = 0.61 ± 0.19 and 0.69 ± 0.16; BOP = 0.09 ± 0.24 and 0.03 ± 0.03 for oil pulling with coconut oil and sesame oil, respectively). CONCLUSIONS: Oil pulling therapy with coconut or sesame oil showed similar results in terms of plaque regrowth inhibition and tooth staining. According to the present results, both coconut oil and sesame oil can be used for oil pulling therapy with the aim of plaque regrowth inhibition.

Odontología restauradora mínimamente invasiva: caso clínico / Minimally invasive restorative dentistry: a clinical case

La decoloración de las piezas dentarias puede te-ner un impacto estético y social que lleva a los pa-cientes a buscar una intervención para mejorar su sonrisa. Las manchas superficiales y las irregula-ridades del esmalte pueden deberse a hipoplasias, hipomineralización molar, fluorosis, uso de medica-mentos, manchas blancas causadas por traumatis-mos o infección en la dentición primaria, o manchas post ortodóncicas. El diagnóstico de los defectos del esmalte se realiza a través de un examen visual por transiluminación. Se han propuesto técnicas micro abrasivas con diferentes agentes para eliminar las manchas superficiales del esmalte, así también como el uso de agentes blanqueadores a baja concentra-ción para equilibrar el color de las piezas dentarias. Si las manchas son profundas se requiere de una mega abrasión y posterior restitución anatómica con resinas compuestas. Los avances tecnológicos en los materiales de restauración adhesivos permi-ten imitar las piezas dentarias naturales permitien-do la mínima destrucción de la estructura dental sin comprometer futuras opciones de restauración. El objetivo de este trabajo es mostrar una secuencia de procedimientos mínimamente invasivos para devol-ver la estética perdida en una paciente que concurre a la Cátedra de Odontología Restauradora (AU)

The discoloration of dental pieces can have an aesthetic and social impact that leads patients to seek an intervention to improve their smile. Superficial stains and enamel irregularities may be due to hypoplasia, molar hypomineralization, fluorosis, drug use, white spots caused by trauma or infection in the primary dentition, or post-orthodontic stains. The diagnosis of enamel defects is made through a visual examination by transillumination. Microabrasive techniques with different agents have been proposed to remove surface stains from the enamel, as well as the use of low-concentration whitening agents to balance the color of the teeth. If the stains are deep, a mega abrasion and subsequent anatomical restoration with composite resins are required. Technological advances in adhesive restorative materials make it possible to mimic natural teeth, allowing minimal destruction of tooth structure without compromising future restorative options. The objective of this work is to show the sequence of minimally invasive procedures to return the lost aesthetics in a patient who attends the Chair of Restorative Dentistry (AU)

Randomized Clinical Study of the Use of MTA and Biodentine™ for Pulpotomy in Primary Teeth

ABSTRACT Objective: To verify, through clinical and radiographic evaluations, the in vivo response of the dentin-pulpal complex of human primary teeth after pulpotomy with MTA and Biodentine™ in a follow-up period of 3, 6, and 12 months. Material and Methods: Thirty teeth were divided into MTA pulpotomy (n = 15) and Biodentine™ pulpotomy (n = 15) from children between 5 and 9 years of age, a randomized clinical trial with simple random sampling. The materials were inserted into the cavity after opening and removing the coronary pulp tissue. The cavity base consisted of glass ionomer cement and light-cured composite resin restoration. Clinical and radiographic analyses were performed after 3, 6, and 12 months. Statistical analysis by Fisher's exact test for dichotomous data at a 5% significance level was utilized. Results: Both materials caused color change after 12 months. However, MTA showed a higher percentage than Biodentine™ (p<0.0001). Pain was detected only with Biodentine™ at six months and mobility at 12 months (p=0.0013). Radiographically, after 12 months, periapical lesions, interradicular lesions, and internal resorption were evidenced in 13% of the cases for Biodentine™-treated teeth (p<0.0013). MTA induced pulp calcification in 13% of cases, unlike Biodentine™ (p<0.0013). Conclusion: BiodentineTM and MTA are suitable for clinical use in pulpotomy treatment, yet both materials lead to tooth discoloration.

Spectrophotometric analysis of internal bleaching of traumatized teeth with coronal discoloration following regenerative endodontic procedures

Aim: The objective of this study was to describe a case series concerning internal bleaching of anterior traumatized teeth that underwent regenerative endodontic procedures (REP). Methods: Seven non-vital maxillary anterior teeth discolored after regenerative endodontic procedures were included and divided into two groups according to the medication protocol used in the REP: (1) Triple antibiotic paste (TAP) group (n=4); (2) Calcium hydroxide and 2% chlorhexidine gel (HC+CHX) (n=3). The bleaching technique used was walking bleach, where sodium perborate associated with distilled water was used. Bleaching agent was replaced weekly until the darkened tooth was slightly lighter than the adjacent tooth. The color was recorded with the aid of a digital spectrophotometer in two moments (T1: prior the first session of bleaching, T2: fourteen days after the last session of bleaching). The change in color after the procedure (ΔE) was calculated and reported in a descriptive analysis. Results: The ΔE for all teeth showed color differences exceeding the perceptibility threshold (ΔE > 3.7). Both groups showed similar ΔE (TAP: 18.3 ± 11.5; HC+CHX: 14 ± 11.2) at the end of the treatment. The average number of sessions needed to achieve satisfactory results was 1.7 ± 0.6 for HC+CHX group and 2.3 ± 0.5 for TAP group. Conclusion: Internal bleaching with sodium perborate associated with distilled water is effective in treating discolored teeth after regenerative endodontic procedures

Effects of acidic beverages on color stability of bulk-fill composites with different viscosities / Efectos de las bebidas ácidas sobre la estabilidad del color de resinas tipo Bulk con diferentes viscosidades

Abstract The aim of this in vitro study is to investigate the effects of acidic beverages on the discoloration of bulk-fill composites with different viscosities. 144 disc-shaped specimens (8mm diameter × 2mm thick) were prepared from four different composite resins including a nanohybrid (Filtek Ultimate), two packable bulk- fill (Filtek Bulk Fill, Tetric N Ceram Bulk Fill), and a flowable bulk-fill composite (Tetric N Flow Bulk Fill). The specimens of each group were divided into 3 subgroups and submerged in distilled water, orange juice and coke (n=12). Color difference (ΔE) were measured using CIELab color space and a compact spectrophotometer (VITA Easyshade) at baseline and after 30 days of immersion. Data were analyzed using two- way ANOVA and Tukeys HSD post-hoc tests (P2.7) was observed for all bulk-fill composites tested. It can be speculated that orange juice has a more negative effect on the color stability compared to coke. Additionally, flowable bulk-fill composite was more prone to discoloration than condensable bulk-fill composites.

Resumen El objetivo de este estudio fue investigar los efectos de las bebidas ácidas en la decoloración de resinas compuestas tipo Bulk con diferentes viscosidades. Se prepararon 144 muestras en forma de disco (8mm de diámetro x 2mm de grosor) a partir de cuatro resinas compuestas diferentes que incluyen un nanohíbrido (Filtek Ultimate), dos de pasta condensables tipo Bulk (Filtek Bulk Fill, Tetric N Ceram Bulk Fill) y una fluida (Tetric N Flow Bulk Fill). Las muestras de cada grupo se dividieron en 3 subgrupos y se sumergieron en agua destilada, jugo de naranja y Coca-Cola (n=12). La diferencia de color (ΔE) se midió utilizando el CIELab y un espectrofotómetro compacto (VITA Easyshade) al inicio y después de 30 días de inmersión. Los datos se analizaron mediante ANOVA bidireccional y pruebas post-hoc HSD de Tukey (P2,7) para todos los materiales resinosos. Se puede especular que el jugo de naranja tiene un efecto más negativo sobre la estabilidad del color en comparación con la Coca-Cola. Además, la resina fluida fue más propensa a la decoloración que las resinas condensables.

A review on natural teeth whitening.

BACKGROUND: Discoloration of teeth occurs for various reasons. Common ingredients like substances from tea and coffee, as well as antibiotics like tetracycline, or food dyes, can percolate into the teeth, and, as such, these stains may persist in the porous structure of the enamel. Smoking is also contributory to dental discoloration, with toxins of tobacco smoke accumulating in a similar way. With aging, teeth tend to be discolored with accumulation of various stains in addition to the enamel gradually eroding to expose the yellow dentin. HIGHLIGHT: This review focused on the effect of several natural ingredients with teeth-whitening properties and their daily clinical application. Metabolic dental bleaching mechanisms, as well as tooth discoloration and decay, were also reviewed. The current scientific literature (mostly from 2000 to 2020) was consolidated from manuscripts retrieved from Scopus, PubMed, ResearchGate, and Google Scholar. CONCLUSION: Natural teeth whitening effectively lightens the natural color of teeth without eroding dental surfaces. On the other hand, commercially available whiteners containing hydrogen peroxide and carbamide peroxide, in high concentrations, can lead to deproteinization and demineralization of teeth through oxidation processes. If used extensively, these compounds may cause a number of adverse effects. Alternative natural teeth-whiteners include ingredients like lemons, strawberries, oranges, papaya, and other fruits. Such natural ingredients offer a milder and safer way of whitening teeth than whiteners containing hydrogen peroxide or carbamide peroxide.

Decoloración coronaria inducida por la utilización de Biodentine y MTA blanco en procedimientos de regeneración pulpar: estudio ex vivo / Coronal discoloration induced by the use of Biodentine and white MTA in pulp regeneration procedures: an ex-vivo study

Se comparó el grado de decoloración de la corona clínica en piezas dentarias anteriores humanas ex-traídas, sometidas a procedimientos de regeneración endodóntica, utilizando MTA blanco o sustituto bioac-tivo de la dentina (Biodentine) como barrera cervical, en presencia de coágulo sanguíneo como andamio. En total se prepararon 24 piezas dentarias anterio-res superiores humanas que fueron divididas en dos grupos control (GC) y dos grupos experimentales (GE). Cada uno incluía 6 piezas dentarias. En los GE se colo-có sangre humana fresca en el interior del conducto, y se confeccionó una barrera de Biodentine (GE3) o MTA (GE4). En los GC se colocó una torunda de algo-dón estéril saturada con solución fisiológica estéril, y se confeccionó una barrera de Biodentine (GC1) o MTA (GC2). El color se evaluó de acuerdo con el espa-cio de color CIE L* a* b* utilizando imágenes fotográfi-cas digitales estandarizadas en dos puntos de tiempo: día 0 (T0) y día 35 (T35). La descripción de los datos in-cluyó mediana (Md), primer cuartil (Q1), tercer cuartil (Q3), media y desviación estándar (DE). Se emplea-ron las pruebas de los rangos con signo de Wilcoxon (RSW) y ANOVA de una vía; p < 0,05 fue considerado significativo. Cuando se comparó ∆E se observaron diferencias significativas entre GC1 y el resto de los materiales (p < 0,05). ∆E fue menor en GC1 (media ± DE; 2,1 ± 1,6) que en los grupos restantes que no pre-sentaron diferencias significativas entre sí. En base a estos resultados, la estabilización del coágulo san-guíneo, como así la limpieza de la cavidad previa a la colocación del Biodentine y el uso de barreras cervi-cales, es imprescindible para evitar la coloración de la corona clínica (AU)

Discoloration remains an unfavorable complication of otherwise successful regenerative endodontic procedure of immature teeth with necrotic pulp. Objective: Compare the degree of discoloration of extracted human teeth after regenerative endodontic procedures, using MTA or Biodentine as a cervical barrier with a blood clot as a scaffold. In total 24 human upper anterior teeth were prepared and divided into two control groups (CG) and two experimental groups (EG). In the EG, fresh human blood was placed inside the root and a Biodentine (GE3) or MTA (GE4) barrier was made in. A sterile cotton swab saturated with sterile physiological solution was placed in the GCs and a Biodentine (GC1) or MTA (GC2) barrier was made in. The color was evaluated according to the CIE L* a* b* color space using standardized digital photographic images at two time points: day 0 (T0) and day 35 (T35). The description of the data included median (Md), first quartile (Q1), third quartile (Q3), means, and standard deviation (SD). Wilcoxon signed rank tests (RSW) and one-way ANOVA were used. p < 0.05 was considered significant. When ∆E was compared, significant differences were observed between GC1 and the rest of the materials (p < 0.05). ∆E was lower in CG1 (mean ± SD; 2.1 ± 1.6) than in the remaining groups, which did not present significant differences between them. There was no significant difference between tooth discolorations with materials in the presence of blood. However, in the absence of blood, Biodentine exhibited less tooth discoloration than MTA (AU)

Avaliação do escurecimento dentinário causado por cimentos obturadores endodônticos em função do uso de agitação ultrassônica / Evaluation of dentin discoloration caused by endodontic root canal sealers due to ultrasonic agitation

Introdução: A descoloração da estrutura dentária representa um grande problema estético e uma das razões mais comuns pelas quais os pacientes vão ao cirurgião-dentista. Objetivo: O objetivo do presente estudo foi avaliar a descoloração dentinária causada pelo emprego dos cimentos obturadores endodônticos AH Plus, MTA Fillapex, Pulp Ca- nal Sealer EWT e Sealer Plus; além de avaliar a influência do uso da agitação ultrassônica (AUS). Métodos: Oitenta blocos de dentes bovinos foram confeccionados e tiveram cavidades circulares preparadas em suas faces palatinas, deixando remanescente de 2,0mm de espessura. Em seguida, os blocos foram randomicamente divididos em função do cimento utilizado e do uso ou não da AUS (n=10). A cor foi mensurada por meio de um espectrofotômetro após a inserção dos cimentos e restauração das cavidades, nos tempos: imediatamente após a inserção dos cimentos (T0 ), após 7 dias (T1 ) e após 180 dias (T2 ). Resultados: Observou-se alteração de cor clinicamente perceptível (ΔE>3,7) causada pelos quatro cimentos obturadores, tanto após 7 dias quanto após 180 dias. Não foram encontradas diferenças significativas entre os grupos nos dois tempos (p>0,05). Conclusões: Pôde-se concluir que os cimentos analisados causaram escurecimento dentinário clinicamente perceptível já após 7 dias, o qual perdurou por todo o período da análise; ainda, que a agitação ultrassônica não interferiu significativamente na ΔE, não influenciando na descoloração dentinária causada pelos cimentos testados (AU).

Introduction: Tooth discoloration is an aesthetic problem commonly reported by patients as one of the main reasons to seek a dentist. Thus, this study aimed to evaluate the dentin discoloration caused by AH Plus, MTA Fillapex, Sealer Plus and Pulp Canal Sealer EWT endodontic sealers, associated or not with ultrasonic agitation during the obturation. Methods: Round cavities were prepared on the palatal faces of eighty bovine teeth slabs, preserving a 2 mm of dentin thickness. The slabs were randomly separated in groups by type of sealer employed and based on the use or not of ultrasonic agitation (n = 10). The color was measured by a spectrophotometer after sealer insertion into the cavities (T0), after 7 (T1) and 180 days (T2). Results: Clinically detectable discoloration (∆E > 3,7) was present in all groups at T1 and T2. Statistically significant differences were not found between T1 and T2 (P > .05). Conclusion: All endodontic sealers tested caused dentin discoloration after 7 days. The color-changing persisted thought the entire experimental period. Moreover, the ultrasonic agitation did not influence on the dentin discoloration caused by the endodontic sealers tested (AU).

Discoloration of Bulk-Fill Versus Conventional Composites: A Spectrophotometric Evaluation / Decoloración de resinas Bulk vs resinas convencionales: Evaluación espectrofotométrica

ABSTRACT: Purpose: The purpose of this study was to evaluate the discoloration of a dual-cure bulk-fill (DCBF) and light-cure bulk-fill (LCBF) composites relative to conventional composites (CC) after water and coffee immersion. Methods: One- hundred disc-shaped specimens (8mm in diameter × 4mm thickness) were prepared using five commercially available composites (n=10); two LCBF (XB-X-trafil Voco, FB-FiltekTM Bulk Fill), one DCBF (FU-Fill-upTM Coltene), and two CC (CE-Clearfil Majesty ES2, EQ-Estelite ΣQuick). Initial and final color readouts were measured with a spectrophotometer (Easyshade,Vita) according to the CIELAB color system. Statistical analyses were performed using 2-way ANOVA with Bonferroni adjustment to evaluate ΔE, ΔL, Δa, and Δb parameters (pFB≥XB>EQ≥CE in water immersion groups and XB>FB>EQ≥FU≥CE in coffee immersion groups. Conclusion: Within the limitations of this study, DCBF composite is more susceptible to intrinsic discoloration compared to LCBF and CC. However, DCBF exhibited lower extrinsic discoloration than LCBF and comparable with CC after coffee immersion. Depending on their chemical and structural compositions, composites will exhibit color change, which compromises the esthetic performance of composite restorations.

RESUMEN: Propósito: El propósito de este estudio fue evaluar la decoloración de resinas bulk de curado dual (DCBF) y bulk activadas por fotopolimerización (LCBF) en relación con las resinas convencionales (CC) después de la inmersión en agua y café. Métodos: Se prepararon cien muestras en forma de disco (8mm de diámetro × 4mm de espesor) utilizando cinco resinas compuestas disponibles comercialmente (n=10); dos LCBF (XB-X-trafil Voco, FB-FiltekTM Bulk Fill), un DCBF (FU-Fill-upTM Coltene) y dos CC (CE-Clearfil Majesty ES2, EQ-Estelite ΣQuick). Las lecturas de color inicial y final se midieron con un espectrofotómetro (Easyshade, Vita) de acuerdo con el sistema de color CIELAB. Los análisis estadísticos se realizaron utilizando ANOVA de 2 vías con ajuste de Bonferroni para evaluar los parámetros ΔE, ΔL, Δa y Δb (pFB≥XB>EQ≥CE en los grupos de inmersión en agua y XB>FB>EQ≥FU≥CE en los grupos de inmersión en café. Conclusión: Dentro de las limitaciones de este estudio, la resina DCBF es más susceptible a la decoloración intrínseca en comparación con LCBF y CC. Sin embargo, DCBF mostró una decoloración extrínseca más baja que LCBF y comparable con CC después de la inmersión en café. Dependiendo de sus composiciones químicas y estructurales, los composites mostrarán cambios de color, lo que compromete el desempeño estético de las restauraciones de resinas con el tiempo.

Effect of Surface Wetting Resin on the Color Stability and Microhardness of Esthetic Composites / Efecto de la resina humectante de superficies sobre la estabilidad del color y la microdureza de resinas compuestas estéticas

ABSTRACT: Objective: The aim of this study was to evaluate and compare the effects of the superficial application of two different modeling resins on the surface microhardness and discoloration of composite resins. Material and Methods: The present study used two different composites and modeling resins. The composites were placed in plastic molds. Subsequently, the modeling resins were applied on the surface of the two composite groups. The microhardness and color pertaining to all the groups were evaluated. The current study used the One-Way ANOVA and Kruskal Wallis tests, in order to perform the statistical evaluation (p<0.05). Results: The present study compared the microhardness pertaining to the groups and the highest microhardness values were observed in the Estelite Asteria group (none), whereas the lowest values were observed in the GC Essentia group (Ultradent). Moreover, the current study evaluated the color stability and the greatest discoloration was observed in the control group of the GC Essentia group, whereas the least discoloration was observed in the Estelite Asteria group that included the samples prepared using Ultradent Wetting Resin. Conclusions: The results of the present study demonstrated that the use of modeling resins, which facilitate the placement of composite resins, reduced the microhardness and discoloration of composite resins. The aforementioned effect can be attributed to the variations in the structure of the filling. However, further studies are warranted to support and verify the results of the current study.

RESUMEN: Objetivo: El objetivo del presente estudio fue evaluar y comparar los efectos de la aplicación superficial de dos resinas humectantes sobre la microdureza superficial y la decoloración de las resinas compuestas. Material y métodos: El presente estudio utilizó dos resinas humectantes y resinas de modelado diferentes. Las resinas compuestas se colocaron en moldes de plástico. Posteriormente, se aplicaron las resinas humectantes sobre la superficie de los dos grupos. Se evaluó la microdureza y el color de todos los grupos. El presente estudio utilizó las pruebas One-Way ANOVA y Kruskal Wallis, para realizar la evaluación estadística (p<0.05). Resultados: Los valores más altos de microdureza se observaron en el grupo Estelite Asteria, mientras que los menores valores se observaron en el grupo GC Essentia (Ultradent). La mayor decoloración se observó en el grupo control o el grupo GC Essentia, mientras que la menor decoloración se observó en el grupo Estelite Asteria con Ultradent Wetting Resin. Conclusiones: Los resultados del presente estudio demostraron que el uso de resinas humectantes, que facilitan la colocación de resinas compuestas, redujo la microdureza y decoloración de las resinas compuestas. El efecto mencionado anteriormente se puede atribuir a las variaciones en la estructura del relleno. Sin embargo, se necesitan más estudios para respaldar y verificar los resultados del presente estudio.

Spectrophotometric evaluation of coronal discoloration induced by bioceramic root canal filling materials / Evaluación espectrofotométrica de la decoloración coronal inducida por materiales biocerámicos de obturación del conducto radicular

The aim of this study is to evaluate the crown discoloration induced by bioceramic root canal filling materials (OrthoMTA and iRoot SP) compared to AH Plus. Material and Methods: Sixty intact mandibular single rooted premolars were sectioned 2 mm below the cemento-enamel junction, prepared, and randomly assigned into four groups according to the root filling materials: OrthoMTA, iRoot SP, AH Plus and unfilled. Results: Before placement of the materials in the pulp chamber and the coronal third of the root, the spectral reflectance lines of the crowns were recorded by a digital spectrophotometer at baseline, and after filling at 1 week and 1, 3 and 6 months and ∆Ε values were calculated. All materials used induced clinically perceptible crown discoloration (∆Ε>3.7) and no significant difference was detected between these materials (p>0.05). Regardless of the material, discoloration progressed significantly within the three months (p<0.05) however, at 6 months, the discoloration reduced for AH Plus and no further increase for bioceramic materials was detected. Conclusion: Bioceramic root filling materials tested induced clinically perceptible crown discoloration and their application in the esthetic zone should be performed with caution.

Objetivo: El objetivo de este estudio es evaluar la decoloración de la corona inducida por materiales biocerámicos de obturación del conducto radicular (OrthoMTA e iRoot SP) en comparación con AH Plus. Material y Métodos: Se seccionaron sesenta premolares mandibulares de raíz única intactos, 2 mm por debajo de la unión cemento-esmalte, se prepararon y se asignaron al azar en cuatro grupos de acuerdo con los materiales de obturación radicular: OrthoMTA, iRoot SP, AH Plus y sin relleno. Resultados:Antes de la colocación de los materiales en la cámara pulpar y el tercio coronal de la raíz, las líneas de reflectancia espectral de las coronas se registraron con un espectrofotómetro digital al inicio del estudio, y a la semana 1, así como a 1, 3 y 6 meses, y los valores ?? fueron calculados. Todos los materiales utilizados indujeron una decoloración de la corona clínicamente perceptible (??> 3,7) y no se detectaron diferencias significativas entre estos materiales (p> 0,05). Independientemente del material, la decoloración progresó significativamente dentro de los tres meses (p<0.05); sin embargo, a los 6 meses, la decoloración se redujo para AH Plus y no se detectó ningún aumento adicional para los materiales biocerámicos. Conclusiones: Los materiales biocerámicos de obturación radicular probados indujeron una decoloración de la corona clínicamente perceptible y su aplicación en la zona estética debe realizarse con precaución.

Tigecycline-Induced Tooth Discoloration in Children Younger than Eight Years.

Tetracycline may cause tooth discoloration when used in young children during tooth development. Whether tigecycline, a tetracycline derivative, has either a similar adverse event or not remains unclear. We assessed the discoloration of the permanent teeth of patients <8 years old after tigecycline exposure. These patients were identified through a retrospective chart review in a Chinese children's hospital. Those who had at least one erupted permanent tooth after tigecycline exposure were interviewed, examined, and photographed by an experienced pediatric dentist and independently assessed by another senior dentist to detect tetracycline-like tooth discoloration. We identified 101 patients who were exposed to tigecycline, 12 of whom were included. The mean daily dose of tigecycline was 2.3 mg/kg of body weight (standard deviation, 0.6), and the median duration was 12.5 days (interquartile range [IQR], 8.0 to 19.3). The median age of exposure was 5.2 years (IQR, 4.5 to 7.4), and the median age of dental examination was 9.1 years (IQR, 9.0 to 10.3). Two patients (16.7%) developed yellow discoloration: a girl having yellow discoloration with white-to-yellow opacities in the upper lateral incisors and lower incisors and a boy with a suspicious buccal yellow discoloration and enamel dysplasia in the second molars. The incidence and extent of tigecycline-associated dental adverse events remain unclear due to the small sample size and inadequate follow-up period.

The Effects of Mouthwashes on the Color Stability of Resin-Based Restorative Materials / Efecto de los enjuagues orales en la estabilidad del color de materiales restauradores a base de resina

Abstract: Objective: This study investigated the effects of three types of mouthwash on the color stability of three resin-based restorative materials (nanohybrid resin composite, sonic-activated bulk-fill material, and compomer). Materials and Methods: To this end, 120 cylindrical disc specimens were prepared and polished, after which they were incubated in distilled water for 24 hours for post-polymerization. The baseline color values of each specimen were measured with a spectrophotometer, then the specimens were randomly divided into four groups. Following immersion in the mouthwashes for 24 hours, the specimens were rinsed with distilled water and dried before the color measurement was repeated. The values of color change (ΔE₀₀) were subsequently calculated. A two-way analysis of variance and Duncan's post hoc multiple comparison tests were conducted to determine statistically significant differences among the restorative materials. Results: All samples showed discoloration after immersion, albeit some instances of discoloration were imperceptible. In this respect, a statistically significant difference was found among the restorative materials and mouthwashes (p<0.05). Imperceptible ΔE₀₀ values were derived on the nanohybrid resin composite and compomer, but perceptible and acceptable ΔE₀₀ values were detected on the sonic-activated bulk-fill materials (p<0.05). The clinically unacceptable discoloration was observed on the sonic-activated bulk-fill composite immersed in Listerine®. Conclusions: Clinicians should make recommendations based on the potential staining capacity of mouthwashes prescribed for daily use in restorative materials. In this way, the need for renewal of restorations due to discoloration could be avoided.

Resumen: Objetivo: Este estudio investigó los efectos de tres tipos de enjuague bucal en la estabilidad del color de tres materiales de restauración a base de resina (resina nanohíbrida, resina bulk-fill de activación sónica y compómero). Materiales y Métodos: Para ello se prepararon y pulieron 120 muestras de discos cilíndricos, después de lo cual se incubaron en agua destilada durante 24 horas pospolimerización. Los valores de color de base de cada muestra se midieron con un espectrofotómetro, después las muestras se dividieron aleatoriamente en cuatro grupos. Tras la inmersión en los enjuagues bucales durante 24 horas, los especímenes se enjuagaron con agua destilada y se secaron antes de repetir la medición del color. Posteriormente se calcularon los valores de cambio de color (ΔE₀₀). Se llevó a cabo un análisis bidireccional de la varianza y las pruebas de comparación múltiple post hoc de Duncan para determinar las diferencias estadísticamente significativas entre los materiales de restauración. Resultados: Todas las muestras mostraron decoloración después de la inmersión, aunque algunos casos esta fue imperceptible. Se encontró una diferencia estadísticamente significativa entre los materiales de restauración y los enjuagues bucales (p<0,05). Se obtuvieron valores imperceptibles de ΔE₀₀ en el compuesto de resina nanohíbrida y el compómero, pero se detectaron valores perceptibles y aceptables de ΔE₀₀ en la resina bulk-fill activada sónicamente (p<0,05). Se observó una decoloración clínicamente inaceptable en la resina bulk-fill activada sónicamente inmersa en Listerine®. Conclusiones: Los clínicos deben hacer recomendaciones basadas en la capacidad potencial de coloración de los enjuagues bucales prescritos para uso diario en los materiales de restauración. De esta manera, se podría evitar la necesidad de renovar las restauraciones debido a la decoloración.

Efectividad de la terapia láser combinada con la técnica convencional en pacientes con discromías dentales / Effectiveness of laser therapy combined with the conventional technique in patients with dental dischromya

Introducción: La discromía dental es una afectación estética, de causa multifactorial, caracterizada por el cambio de coloración de uno o varios dientes. Objetivo: Evaluar la efectividad de la terapia láser como fuente de luz y calor en pacientes con discromías dentales. Método: Se realizó un estudio cuasi experimental, de intervención terapéutica, en 24 pacientes con discromías dentales atendidos en la Clínica Estomatológica Provincial DocenteMártires del Moncada de Santiago de Cuba, desde julio de 2017 hasta julio de 2018. Los integrantes del estudio se asignaron de forma aleatoria a 2 grupos de tratamiento:a los pares (grupo de estudio) se les aplicó láser combinado con la técnica convencional de peróxido de hidrógeno;a los impares (grupo control), tratamiento convencional solamente.Se utilizaron las frecuencias absoluta y relativa como medidas de resumen, así como la prueba de X 2 de homogeneidad para la validación estadística, con un nivel de significación de 0,05. Resultados: Para los pacientes del grupo de estudio, la segunda y tercera sesiones fueron más efectivas. Al culminar el tratamiento, ambos resultaron efectivos, pero los que recibieron láser evolucionaron más rápidamente que los tratados solo con peróxido de hidrógeno. Conclusiones: El uso de la terapia láser y peróxido de hidrógeno fue efectivo en pacientes con discromías dentales y demostró que no provoca efectos adversos en los dientes tratados.

Introduction: The dental dischromya is an esthetic disorder, of multifactorial cause, characterized by the change of coloration of one or several teeth. Objective: To evaluate the effectiveness of laser therapy as a source of light and heat in patients with dental dischromya. Method: A quasi-experiment, of therapeutic intervention study, was carried out in 24 patients with dental dischromya assisted in Mártires del Moncada Teaching Provincial Stomatological Clinic in Santiago de Cuba, from July, 2017 to March, 2018. The members of the study were assigned at random with 2 treatment groups: a study group (pairs) to whom laser combined with the conventional technique of peroxide of hydrogen was applied; to odd number patients (control group), conventional treatment only. The absolute and relative frequencies were used as summary measures, as well as the chi-square test of homogeneity for the statistical validation, with a level of significance of 0.05. Results: For the patients of the study group, the second and third sessions were more effective. When culminating the treatment, both were effective, but those that received laser evolved more quickly than those treated with peroxide of hydrogen. Conclusions: The use of the laser therapy and peroxide of hydrogen was effective in patients with dental dischromya and it was demonstrated that doesn't cause adverse effects in the treated teeth.

Comparison of Walking-Bleaching and Photon-Initiated Photoacoustic Streaming Techniques in Tooth Color Change of Artificially Colored Teeth.

Background and objective: The aim of this study is to compare the bleaching effect of photon-induced photoacoustic streaming (PIPS) using carbamide peroxide or sodium perborate-20% hydrogen peroxide (H2O2) compared with walking-bleaching techniques using sodium perborate-20% H2O2 or carbamide peroxide without PIPS on artificially colored teeth. Materials and methods: Root canal treatments of 85 extracted human maxillary central incisors were completed and artificially stained using sheep's blood. Teeth were randomly grouped into five groups according to the bleaching techniques to be tested: Group 1: walking bleaching with carbamide peroxide; Group 2: walking bleaching with sodium perborate-20% H2O2; Group 3: PIPS+carbamide peroxide; Group 4: PIPS+sodium perborate-20% H2O2; and Group 5: control. Experimental specimens were bleached for 3 weeks. Buccal surfaces of the crowns were used for spectrophotometric measurements, limited with a 7-mm external diameter rounded strip, before bleaching and on days 7, 14, and 21. The total change in color (ΔE*) were analyzed with Welch's ANOVA at a significance level of p = 0.05 and Tamhane post-hoc test was used for multiple comparisons. Results: Starting from the second week, Group 4 showed significantly better bleaching effect compared with the other groups (p < 0.05). The other experimental groups also have bleaching effects, but there was no statistically significant difference between Group 1, Group 2, and Group 3 (p > 0.05). Conclusions: Sodium perborate-20% H2O2 activated with PIPS gave a bleaching effect superior to that of walking-bleaching techniques or PIPS using with carbamide peroxide.

Estabilidad de color de dientes naturales ante diferentes bebidas: estudio in vitro / Color stability of natural teeth against different drinks: in vitro study

El color es un efecto visual de los rayos de luz reflejándose y su concepto es complejo por ser una sensación que se percibe y por las características electromagnéticas. Los dientes varían espacialmente porque son curvados, tienen prolongaciones relativamente pequeñas y vistas en contra de una variable de fondo no uniforme así como típicamente una iluminación no estandarizada, por lo cual difieren en relación con su colorimetría, por lo que el estudio del color es fundamental en la odontología. En la actualidad hay métodos para evaluar el color, desde una simple revisión visual hasta instrumentos como el colorímetro y los espectrofotómetros, los cuales son aparatos utilizados en la medida del color de un objeto a través de su longitud de onda reflejada. Una pigmentación dental se produce por varios factores, ya sean intrínsecos y extrínsecos, estas pigmentaciones son factores importantes tanto en la estética como en el aspecto físico, por lo que es importante poder evaluar la estabilidad de los dientes naturales ante diferentes sustancias que podrían modificar su color natural. En este estudio nos dimos a la tarea de evaluar el cambio de color de dientes naturales ante diferentes bebidas, se eligieron tres bebidas pigmentantes y de uso común: café, vino tinto y jugo de arándano; se utilizaron 10 dientes unirradiculares del mismo color previamente analizados con el espectrofotómetro. Un diente fue la muestra control y los nueve restantes se sumergieron en frascos separados con 10 mL de las tres bebidas elegidas. Realizando la evaluación de color a los 15, 30 y 90 días con ayuda del espectrofotómetro, pudimos observar que el diente sumergido en café no tuvo variación durante los primeros 15 días y el cambio más notable de color fue hasta los 90 días a diferencia de las muestras sumergidas en vino y jugo de arándano cuya variación máxima de color se presentó en 15 días respectivamente (AU)

Color is a visual effect of light rays reflecting and its concept is complex, for being a sensation that is perceived and for the electromagnetic characteristics. Teeth vary spatially because they are curved, have relatively small extensions, and are viewed against a non-uniform background variable as well as typically non-standardized illumination, which is why they differ in relation to their colorimetry. So the study of color is fundamental in dentistry. Currently, there are methods to evaluate color, from a simple visual check to instruments such as the colorimeter and spectrophotometers, which are devices used to measure the color of an object through its reflected wavelength. A dental pigmentation is produced by various factors, both intrinsic and extrinsic, these pigmentations are currently important factors in both aesthetics and physical appearance, so it is important to be able to evaluate the stability of natural teeth against different substances that could modify its natural color. In this study, we undertook the task of evaluating the change in the color of natural teeth when faced with different beverages. Three pigment and commonly used beverages were chosen: coffee, red wine and cranberry juice; 10 single-rooted teeth of the same color previously analyzed with the spectrophotometer were used. One tooth was the control sample and the remaining nine were immersed in separate bottles with 10 mL of the three chosen drinks. Carrying out the color evaluation at 15, 30 and 90 days with the help of the spectrophotometer, we could see that the tooth immersed in coffee did not change during the first 15 days and the most notable change in color was up to 90 days, unlike the samples immersed in wine and cranberry juice whose maximum color variation was presented in 15 days respectively (AU)

Tooth discoloration using calcium silicate-based cements for simulated revascularization in vitro

Abstract The endodontic revascularization may be an alternative treatment for necrotic immature teeth, however, several treatment steps may cause tooth discoloration. This study evaluated the use of three calcium silicate-based cements with different radiopacifying agents on the color alteration (∆E) of extracted premolars after simulation of revascularization. Forty single rooted extracted premolars were shaped with #1-6 gates Glidden drills, rinsed with sodium hypochlorite, and filled with fresh human blood. Three calcium silicate-based cements with different radiopacifying agents (bismuth oxide - CSBi, calcium tungstate - CSW, and zirconium oxide - CSZr) were applied over the blood clot (n=10). The control group received the application of a temporary zinc oxide-based cement (TFZn) (n=10). ∆E was measured with a spectrophotometer, using the L*a*b* color system of the International Commission on Illumination (CIELab), in different times: prior to the preparation of the access cavity (t0); right after treatment (t1); and after one (t2), two (t3), three (t4) and four (t5) months. The tooth site for color evaluation was standardized by silicon matrix, the color reading was performed 3 times per tooth, and the teeth were stored in 37º water between evaluations. ∆E, whiteness (WID index) and yellowness (b*) were evaluated. Data were subjected to one-way ANOVA and repeated measures ANOVA, followed by Tukey's post hoc test (α=0.05). All groups were similar in ∆E1 (t0-t1). The ∆E was the lowest and constant in the control group. In all evaluation times, CSBi presented the highest ∆E (p<0.01). CSW and CSZr were similar in all evaluated times and presented intermediate ∆E values. WID index from CSBi and CSW presented more distancing from 'white' reference. CSBi presented the greatest decrease in yellowness (b* value). The cement containing bismuth oxide presented the highest color alteration values. All tested calcium silicate-based cements presented clinically perceptible discoloration. Calcium tungstate and zirconium oxide may be used as alternative radiopacifiers to decrease tooth discoloration after endodontic tooth revascularization.

Resumo A revascularização endodôntica pode ser um tratamento alternativo para dentes imaturos necrosados, porém, várias etapas do tratamento podem causar alteração de cor dental. Este estudo avaliou o uso de três cimentos a base de silicato de cálcio com diferentes agentes radiopacificadores na alteração de cor (∆E) de pré-molares extraídos após a simulação de revascularização. Quarenta pré-molares unirradiculares extraídos foram conformados com brocas gates glidden #1-6, irrigados com hipoclorito de sódio, e preenchidos com sangue humano fresco. Três cimentos a base de silicato de cálcio com diferentes agentes radiopacificadores (óxido de bismuto - CSBi, tungstato de cálcio - CSW, e óxido de zircônio - CSZr) foram aplicados sobre o coágulo sanguíneo (n=10). O grupo controle recebeu a aplicação de um cimento temporário a base de óxido de zinco (TFZn) (n=10). ∆E foi medida com um espectrofotômetro, utilizando o sistema de cor L*a*b* da International Commission on Illumination (CIELab), em tempos diferentes: previamente ao preparo da cavidade de acesso (t0); logo após o tratamento (t1); e após um (t2), dois (t3), três (t4) e quatro (t5) meses. O local do dente para a avaliação de cor foi padronizado por uma matriz de silicone, a leitura da cor foi realizada 3 vezes por dente, e os dentes foram armazenados em água a 37ºC entre as avaliações. ∆E, 'clareamento' (índice WID) e tom amarelado (b*) foram avaliados. Os dados foram submetidos ao teste de ANOVA um fator e teste ANOVA de medidas repetidas, seguidos pelo teste post hoc de Tukey (α=0,05). Todos os grupos foram semelhantes em ∆E1 (t0-t1). A ∆E foi menor e constante no grupo controle. Em todos os tempos de avaliação, CSBi apresentou os maiores valores de ∆E (p<0.01). CSW e CSZr foram semelhantes em todos os tempos avaliados e apresentaram valores intermediários de ∆E. O índice WID de CSBi e CSW se distanciaram mais da referência 'branco'. CSBi apresentou maior diminuição no tom amarelado (valor de b*) os outros grupos. O cimento contendo óxido de bismuto apresentou os maiores valores de alteração de cor. Todos os cimentos testados apresentaram alteração de cor clinicamente perceptível. O tungstato de cálcio e óxido de zircônio podem ser usados como radiopacificares alternativos para a diminuição da alteração de cor dental após o processo de revascularização endodontica.