Analysis of dentin wear and biological properties promoted by experimental inoffice desensitizing materials.

BACKGROUND: This study aimed to evaluate dentin wear and biological performance of desensitizing materials. METHODS: Seventy bovine root dentin blocks were sectioned. Half of the surface of each specimen was untreated (control) and the other half was immersed in EDTA and treated with the following desensitizing materials: placebo varnish (PLA), fluoride varnish (FLU), sodium fluoride (NaF) varnish + sodium trimetaphosphate (TMP), universal adhesive (SBU), S-PRG varnish (SPRG), biosilicate (BIOS), and amelotin solution (AMTN). After application, the specimens were submitted to an erosive-abrasive challenge and the wear analyzed by optical profilometer. Serial dilutions of extracts obtained from the culture medium containing discs impregnated with those desensitizers were applied on fibroblasts and odontoblasts-like cells cultures. Cytotoxicity and production of total protein (TP) by colorimetric assays were determined after 24 h. Data were statistically analyzed using Kruskal-Wallis, Dunn's, One-way ANOVA and Tukey tests (p ≤ 0.05). RESULTS: No dentin wear was observed only for SBU. The lowest dentin wear was observed for AMTN and TMP. Cell viability was significantly reduced after treatment with undiluted extracts of PLA, FLU, TMP and SBU in fibroblasts and TMP and SBU in odontoblast-like cells. SPRG, BIOS and AMTN were cytocompatible at all dilutions tested. Considering TP results, no statistical difference was observed among the groups and high levels for TP were observed after TMP and FLU treatments. CONCLUSIONS: Universal adhesive system may protect dentin with opened tubules from wear after challenge. Extracts of adhesive and fluoride varnishes presented cytotoxic mainly on fibroblasts. The enamel protein may be a future alternative to treat dentin with opened tubules because it may cause low wear under erosive-abrasive challenge with low cytotoxic effects.

Rugosidade superficial e resistência ao desgaste de materiais para CAD-CAM após simulação da mastigação / Surface roughness and wear resistance of CAD-CAM materials after chewing simulation

Objetivo: determinar a rugosidade superficial de coroas de quatro materiais processados por tecnologia CAD-CAM antes e após ensaio de desgaste realizado em um simulador da mastigação. E, ainda, mensurar a perda de volume e a perda de peso desses materiais após o ensaio de desgaste. Materiais e métodos: sessenta e quatro coroas foram confeccionadas e distribuídas em grupos. Grupos de coroas simulando o dente 16: B (IPS e.max CAD), C (Suprinity), D (Enamic) e E (Lava Ultimate); grupos de coroas antagonistas simulando o dente 46: AB, AC, AD e AE (todas compostas do material IPS e.max CAD). As coroas foram levadas à uma simuladora da mastigação para a realização do ensaio de desgaste. Antes do ensaio, as coroas foram submetidas à pesagem e à análise em um perfilômetro para determinação da rugosidade superficial e, também, para obtenção de imagens da topografia para determinação do volume. Após o ensaio de desgaste, as mesmas análises foram repetidas e os dados coletados e analisados. Resultados: os valores de rugosidade encontrados antes e após o ensaio de desgaste para os grupos de coroas testadas foram E > D = C = B, e para os grupos de coroas antagonistas foram AB = AC = AD = AE. Não houve diferença estatística dos valores de Ra antes e após o ensaio de desgaste de nenhum grupo quando comparados entre si. Os valores de perda de volume encontrados foram: grupo B = 29,18 mm3, grupo C = 21,59 mm3, grupo D = 20,73 mm3, grupo E = 14,17 mm3, grupo AB = 23,28 mm3, grupo AC = 26,07 mm3, grupo AD = 26,57 mm3 e grupo AE = 14,30 mm3. Os valores de perda de peso encontrados foram: grupo B = 0,026 g, grupo C = 0,017 g, grupo D = 0,007 g, grupo E = 0,007 g, grupo AB = 0,012 g, grupo AC = 0,011 g, grupo AD = 0,045 g e grupo AE = 0,003 g. Conclusões: as coroas IPS e.max CAD, Suprinity e Enamic apresentaram melhor desempenho no parâmetro rugosidade superficial, mantendo os valores de rugosidade pelo período de um ano de simulação da mastigação. As coroas de IPS e.max CAD apresentaram ótimo desempenho como coroa antagonista dos materiais vitrocerâmicos, híbrido e resinoso, no quesito rugosidade superficial, não alterando os valores de rugosidade apresentados após um ano de simulação da mastigação. As coroas Lava Ultimate apresentaram o melhor desempenho no quesito desgaste, com os menores valores de perda de volume e de peso. Apresentaram também a menor taxa de desgaste do antagonista. Não foi encontrada relação entre o comportamento de desgaste e o parâmetro rugosidade superficial. IPS e.max CAD, Suprinity e Enamic exibiram um potencial de desgaste maior, mas apresentaram menor rugosidade do que o Lava Ultimate.

Myocentric relation in an additive esthetic rehabilitation within a fully digital workflow.

In recent years, tooth wear has been a growing concern in dentistry as it has become increasingly prevalent among the population. At the same time, the development of adhesive techniques has enabled minimally invasive treatment protocols, with the goal of preserving and protecting teeth for as long as possible. This clinical report presents the case of a full-mouth rehabilitation patient with tooth wear who was treated using minimally invasive techniques. Esthetic and functional outcomes were designed and monitored using digital tools such as digital impressions, 3D facial scans, a digital tooth library, transcutaneous electrical nerve stimulation (TENS), MRI, and kinesiographic (KS) analysis throughout the treatment. To increase the vertical dimension of occlusion, instead of using traditional centric relation (CR) methods, a myocentric relation (MCR) technique was employed. This approach allowed the clinician to maintain the occlusal Class I situation, avoiding more invasive orthodontic treatment or maxillofacial surgery and resulting in reduced morbidity, treatment time, and cost for the patient. At the 1-year follow-up, good patient adaptation was shown, suggesting that the MCR concept is a viable alternative to conventional CR methods in appropriate cases.

Reabilitação estética e funcional inferior com aumento de dimensão vertical de oclusão: relato de caso / Lower aesthetic and functional rehabilitation with increased vertical dimension of occlusion: case report

Os hábitos parafuncionais são caracterizados como movimentos involuntários e multifatoriais, podendo ter como principais fatores causais o estresse e a ansiedade. Essa condição acarreta, muitas vezes, na diminuição da dimensão vertical de oclusão por conta do desgaste dentário, prejudicando mastigação, fonação, estética e funções, sendo, portanto, de suma importância seu diagnóstico e tratamento. Aquele se dá através da anamnese, associado ao exame clínico e, se necessário, exames complementares. A abordagem clínico-terapêutica é ampla e multidisciplinar, devendo atuar no fator causal e suas consequências, existindo uma gama de possibilidades terapêuticas, tornando, por isso, um tratamento complexo. Por tal, o presente estudo aborda uma opção de tratamento em um relato de um caso clínico onde o paciente apresentava perda de dimensão vertical de oclusão, desgastes dentários e queixas funcionais e estéticas. A técnica se deu por meio do aumento da dimensão vertical através de Table Tops e facetas anteriores, ambas em resina composta atrelado ao aconselhamento multidisciplinar. Este trabalho mostrou a importância da realização de uma técnica reabilitadora correta, pois a sobrecarga e a perda de dimensão vertical podem gerar danos ao sistema estomatognático, prejudicando a articulação temporomandibular, ligamentos, músculos e dentes. Nesse contexto, conclui-se que é de suma importância uma avaliação minuciosa do paciente, tendo um planejamento correto do caso para um correto tratamento e um prognóstico positivo(AU)

Parafunctional habits are characterized as involuntary and multifactorial movements, and the main causal factors may be stress and anxiety. This condition often leads to a decrease in the vertical dimension of occlusion due to tooth wear, impairing chewing, phonation, aesthetics and functions, and therefore its diagnosis and treatment are of supreme importance. The former takes place through anamnesis, associated with a clinical examination and, if necessary, additional tests. The clinicaltherapeutic approach is wide and multidisciplinary and must operate on the causal factor and its consequences, with a range of therapeutic possibilities, turning it a complex treatment. Therefore, the study presents a treatment of a case report where the patient had loss of vertical dimension of occlusion, dental wear and functional and aesthetic complaints. The technique was performed by increasing the vertical dimension through Table Tops and anterior veneers, both in composite resin attached to a multidisciplinary advice. This work showed the importance of performing a correct rehabilitation technique, because the overload and loss of vertical dimension can cause damage to the stomatognathic system, harming the temporomandibular joint, ligaments, muscles and teeth. In this context, it is concluded that a thorough evaluation of the patient is very important, having a correct planning of the case for a correct treatment and a positive prognosis(AU)

Proteomic analysis of stimulated saliva in gastroesophageal reflux disease patients with and without erosive tooth wear: Observational study.

OBJECTIVE: To evaluate the difference in the proteomic profile of stimulated saliva in patients with gastroesophageal reflux disease (GERD) with (GE) and without (GNE) erosive tooth wear (ETW), regarding both human and bacterial proteins. METHODS: Stimulated saliva (SS) was collected from 16 patients (8/group). Samples were centrifuged at 4.500 g for 15 min under refrigeration to remove all debris. The supernatant from each saliva sample was taken and frozen at -80 °C. After extracting the proteins, they were submitted to reverse phase liquid chromatography and mass spectrometry (nLC-ESI-MS/MS). Label-free proteomic quantification was performed using Protein Lynx Global Service (PLGS) software (p < 0.05) for human and bacterial proteins. RESULTS: In total, 67 human proteins were common for GNE and GE groups. GNE group presented, compared to GE group, increase in proteins that confer antimicrobial and acid resistant properties, such as cystatins, histatin and immunoglobulins. However, GNE group had a marked decrease in subunits of hemoglobin (α, ß and delta). Regarding bacterial proteins, for SS, 7 and 10 unique proteins were identified in the GE and GNE groups, respectively. They are related to protein synthesis and energy metabolism and interact with human proteins typically found in saliva and supramolecular complexes of the acquired pellicle. CONCLUSIONS: Our data indicate that the stimulation of the salivary flow increases acid resistant and antimicrobial proteins in saliva, which might protect against ETW. CLINICAL SIGNIFICANCE: This pioneer study showed important differences in the human and bacterial proteome of SS in patients with GERD with or without ETW.

Comportamiento Mecánico de un Premolar Humano Sano Sometido a Fuerzas Funcionales y Disfuncionales en un MEF / Mechanical Behavior of a Healthy Human Premolar Subjected to Functional and Dysfunctional Forces in a FEM

El propósito de este estudio fue analizar el comportamiento mecánico de la estructura dental sana de un primer premolar inferior humano sometido a fuerzas funcionales y disfuncionales en diferentes direcciones. Se buscó comprender, bajo las variables contempladas, las zonas de concentración de esfuerzos que conllevan al daño estructural de sus constituyentes y tejidos adyacentes. Se realizó el modelo 3D de la reconstrucción de un archivo TAC de un primer premolar inferior, que incluyó esmalte, dentina, ligamento periodontal y hueso alveolar considerando tres variables: dirección, magnitud y área de la fuerza aplicada. La dirección fue dirigida en tres vectores (vertical, tangencial y horizontal) bajo cuatro magnitudes, una funcional de 35 N y tres disfuncionales de 170, 310 y 445 N, aplicadas sobre un área de la cara oclusal y/o vestibular del premolar que involucró tres contactos estabilizadores (A, B y C) y dos paradores de cierre. Los resultados obtenidos explican el fenómeno de combinar tres vectores, cuatro magnitudes y un área de aplicación de la fuerza, donde los valores de esfuerzo efectivo equivalente Von Mises muestran valores máximos a partir de los 60 MPa. Los valores de tensión máximos se localizan, bajo la carga horizontal a 170 N y en el proceso masticatorio en la zona cervical, cuando la fuerza pasa del 60 %. Sobre la base de los hallazgos de este estudio, se puede concluir que la reacción de los tejidos a fuerzas funcionales y disfuncionales varía de acuerdo con la magnitud, dirección y área de aplicación de la fuerza. Los valores de tensión resultan ser más altos bajo la aplicación de fuerzas disfuncionales tanto en magnitud como en dirección, produciendo esfuerzos tensiles significativos para la estructura dental y periodontal cervical, mientras que, bajo las cargas funcionales aplicadas en cualquier dirección, no se generan esfuerzos lesivos. Esto supone el reconocimiento del poder de detrimento estructural del diente y periodonto frente al bruxismo céntrico y excéntrico.

SUMMARY: The purpose of this study was to analyze the mechanical behavior of the healthy dental structure of a human mandibular first premolar subjected to functional and dysfunctional forces in different directions. It was sought to understand, under the contemplated variables, the areas of stress concentration that lead to structural damage of its constituents and adjacent tissues. The 3D model of the reconstruction of a CT file of a lower first premolar was made, which included enamel, dentin, periodontal ligament and alveolar bone considering three variables: direction, magnitude and area of the applied force. The direction was directed in three vectors (vertical, tangential and horizontal) under four magnitudes, one functional of 35 N and three dysfunctional of 170, 310 and 445 N, applied to an area of the occlusal and/or buccal face of the premolar that involved three stabilizing contacts (A, B and C) and two closing stops. The results obtained explain the phenomenon of combining three vectors, four magnitudes and an area of force application, where the values of effective equivalent Von Mises stress show maximum values from 60 MPa. The maximum tension values are located under the horizontal load at 170 N and in the masticatory process in the cervical area, when the force exceeds 60%. Based on the findings of this study, it can be concluded that the reaction of tissues to functional and dysfunctional forces varies according to the magnitude, direction, and area of application of the force. The stress values turn out to be higher under the application of dysfunctional forces both in magnitude and in direction, producing significant tensile stresses for the dental and cervical periodontal structure, while under functional loads applied in any direction, no damaging stresses are generated. This supposes the recognition of the power of structural detriment of the tooth and periodontium against centric and eccentric bruxism.

Fluoride varnishes supplemented with nano-sized sodium trimetaphosphate reduce enamel erosive wear in vitro.

OBJECTIVE: To evaluate the effect of fluoride (F) varnishes with sodium trimetaphosphate (TMP) on erosive tooth wear (ETW) in vitro. METHODS: Enamel blocks (n = 100) were divided into 5 experimental groups (n = 20/group): Placebo (Pla - without F/TMP); 5 % NaF (NaF); 5 % NaF + 5 % micrometric TMP (NaF+5 %MICRO); 5 % NaF + 2.5 % nano-sized TMP (NaF+2.5 %NANO), and 5 % NaF + 5 % nano-sized TMP (NaF+5 %NANO). Blocks received a single varnish application (6 h contact), and were submitted to 4 daily erosive challenges (ERO, 0.05 M citric acid, pH 3.2, 90 s, under agitation), for 5 days. After ERO, half of the blocks (n = 10/group) were subjected to brushing abrasion (ERO+ABR). Profilometry, surface hardness (SH), and cross-sectional hardness (ΔKHN) were determined. The data were submitted to 2-way ANOVA and Fisher's LSD test (p < 0.05). RESULTS: Enamel wear was significantly lower for ERO compared with ERO+ABR for all varnishes tested (p < 0.001), following the pattern NaF+5 %NANO < NaF+5 %MICRO < NaF < NaF+2.5 %NANO < Pla (both for ERO and ERO+ABR). The highest SH loss was observed for Pla and the lowest for NaF (ERO) and NaF+2.5 %NANO (ERO+ABR), without significant differences among NaF+2.5 %NANO, NaF, and NaF+5 %MICRO. The highest ΔKHN values were observed for NaF+5 %MICRO and NaF+5 %NANO at 5-30 µm, with less marked differences among the groups at 30-70 µm (ERO and ERO+ABR). CONCLUSIONS: The addition of TMP to F varnishes significantly improves protection against ETW in vitro. The use of 5 % nano-sized TMP further enhances such effects. CLINICAL SIGNIFICANCE: F varnishes containing TMP can reduce enamel loss caused by ERO or ERO+ABR.

An Improvised Approach For Regaining Mouth Opening And Managing Tooth Wear In Oral Sub-Mucous Fibrosis.

This case report demonstrates the full mouth prosthetic rehabilitation of a patient with generalised compensated tooth wear and oral sub-mucous fibrosis (OSMF). A 50- year-old female with advanced tooth wear and concomitant OSMF presented to the clinic. She was managed in a sequential manner using an occlusal splint, extractions of hopeless teeth, root canal treatment of strategically important teeth, surgical crown lengthening of abutment teeth, and dental implants to replace missing dentition, followed by crown and bridgework to rehabilitate the dentition. All procedures were done on the principles of re-organised occlusal intervention. The outcome was a functional dentition with an aesthetic smile and a satisfied patient. The regaining of mouth opening among OSMF subjects is a challenge. The usual management is prescribing muscle stretching exercises, drugs, or surgery. In the present case, we managed to achieve significant improvement in mouth opening with occlusal splints. The use of such occlusal orthotics has never been reported.

Rendimiento Clínico de las Restauraciones Adhesivas con Resina Compuesta en Casos de Pacientes con Desgaste Severo e Incremento de Dimensión Vertical: Revisión de Literatura Sistematizada / Clínical Performance of Adhesive Restorations with Composite Resin in Cases of Patients with Severe Wear and Increased Vertical Dimension: Systematized Literature Review

El desgaste dental severo se describe como la pérdida sustancial de la estructura dental, con exposición de la dentina y pérdida significativa de igual o más de 1/3 de la corona clínica. El uso de materiales compuestos de resina permite al clínico ser más conservador, debido a su aplicación mínimamente invasiva. Además de ello, son relativamente económicas, proporcionan buena estética general, así como un buen rendimiento y facilidad en la reparación. El objetivo de esta revisión de literatura sistematizada es recopilar información disponible en la literatura referente a cuál es el rendimiento clínico de las restauraciones adhesivas con resina compuesta en casos de pacientes con desgaste severo e incremento de la dimensión vertical como objetivo rehabilitador. Se analizaron artículos entre los años 2000 y 2022, seleccionando cuatro bases de datos (Pubmed, Scopus, Scielo y Web of Science). Para identificar los descriptores se utilizó los Medical subject headings (Mesh): Tooth Wear, Composite Restorations, Resin y Oral Rehabilitation. No se aplicó restricciones de idioma, país de origen, autor o lugar de publicación donde se realizó el estudio. Como resultado de la búsqueda se obtuvieron 71 artículos, de los cuales se seleccionaron 5 que cumplieron con los criterios de elegibilidad para ser considerados en la revisión de literatura sistematizada. Se encontró un promedio de tasa de éxito ente el 89,4 % - 100 % en un promedio total de 5.2 años de seguimiento. Se puede concluir, hasta donde se tiene conocimiento en la literatura científica disponible, que el tratamiento de restauraciones adhesivas con resinas compuestas en pacientes con desgaste severo es recomendable, enfocado en un periodo a corto-mediano plazo (3-5 años), siendo una opción de tratamiento económica y mínimamente invasiva.

Severe tooth wear is described as the substantial loss of tooth structure, with dentin exposure and significant loss of equal to or more than 1/3 of the clinical crown. The use of resin composite materials allows the clinician to be more conservative, due to its minimally invasive application. In addition to this, they are relatively inexpensive, provide good general aesthetics, as well as good performance and ease of repair. The objective of this systematic literature review is to collect information available in the literature regarding the clinical performance of adhesive restorations with composite resin in cases of patients with severe wear and increase in the vertical dimension as a rehabilitation objective. Articles between the years 2000 and 2022 were analyzed, selecting four databases (Pubmed, Scopus, Scielo and Web of Science). To identify the descriptors, the Medical subject headings (Mesh) were used: Tooth Wear, Composite Restorations, Resin and Oral Rehabilitation. No language, country of origin, author or place of publication restrictions where the study was conducted were applied. As a result of the search, 71 articles were obtained, of which 5 were selected that met the eligibility criteria to be considered in the systematic literature review. An average success rate between 89.4 % - 100 % was found in a total average of 5.2 years of follow-up. It can be concluded, to the best of our knowledge in the available scientific literature, that the treatment of adhesive restorations with composite resins in patients with severe wear is recommendable, focused on a short-medium term period (3-5 years), being a Inexpensive and minimally invasive treatment option.

Envelhecimento bucal precoce e suas consequências para a cavidade oral com foco em reabilitação com resina composta: relato de caso / Early oral aging and its consequences for the oral cavity focusing on rehabilitation with composite resin: case report

O envelhecimento bucal precoce apresenta cada vez uma maior incidência nos consultórios odontológicos e sua degradação aos tecidos orais exige uma atenção por parte do cirurgiãodentista devido ao seu alto grau de complexidade. Esse envelhecimento precoce é causado principalmente por hábitos parafuncionais, dieta ou ambos. Suas consequências são desgastes patológicos dos tecidos dentários, extrusão passiva, perda de dimensão vertical e comprometimento estético e funcional. Por conta disso, o presente estudo teve como objetivo realizar um relato de caso clínico em um paciente jovem e com queixa estética como consequência de hábitos parafuncionais, aonde foram realizados uma reabilitação oral envolvendo aumento da dimensão vertical de oclusão através de Table Tops sem desgastes dentários e restaurações estéticas, ambas com resina composta. Essa reabilitação devolveu a DVO da paciente, trazendo conforto, contatos estáveis, guias de desoclusão e satisfação estética e funcional por parte da paciente(AU)

Early oral aging has an increasing incidence in dental offices and its degradation to oral tissues requires attention from the dentist due to its high degree of complexity. This premature aging is mainly caused by parafunctional habits, diet, or both. Its consequences are pathological wear of dental tissues, passive extrusion, loss of vertical dimension and aesthetic and functional impairment. Because of this, the present study aims to carry out a clinical case report in a young patient with an aesthetic complaint as a result of parafunctional habits, where an oral rehabilitation was carried out involving an increase in the vertical dimension of occlusion through Table Tops without dental wear and aesthetic restorations, both with composite resin. This rehabilitation returned the patient's OVD, bringing comfort, stable contacts, disocclusion guides and aesthetic and functional satisfaction on the part of the patient(AU)

[Direct adhesive reconstructions for restoration of posterior teeth with erosive tooth wear]. / Direkte Restaurationstechnik im Seitenzahnbereich zur Versorgung von erosionsbedingtem Zahnhartsubstanzverlust.

The restorative treatment of dental hard tissue loss, e.g., due to erosion, and the rehabilitation of the original vertical bite dimension confronts the dentist with problems when implementing the therapy. Traditionally, this therapy is conducted with laboratory-fabricated workpieces made of ceramics which usually require a preparation of the remaining tooth substance and also causes high costs for the patient. Therefore, alternative methods should be considered. This article presents the use of direct adhesive composite restorations as a way of reconstructing a dentition severely altered by erosion. To reconstruct the occlusal surfaces, transfer splints are used that are made on the basis of individual wax-up models. The procedure described is a well-researched and proven method for restoring teeth with erosion-related loss of hard tooth substance. As with all new procedures, there will be a certain learning curve for the practical dentist after which high-quality restorations can be implemented with this technique.

Reabilitação estética com facetas e coroas cerâmicas em dissilicato de lítio: relato de caso / Aesthetic rehabilitation with ceramic facets and crowns in lithium disilicate: case report

Introdução: A procura pela estética do sorriso é crescente na Odontologia, pois, muitas vezes um sorriso alinhado e periodonto saudável não são o bastante. A cerâmica odontológica apresenta-se como uma ótima possibilidade restauradora, visto o avanço das técnicas de adesão entre o substrato dentário e as cerâmicas, torna-se mais previsível o resultado com este tipo de reabilitação. Objetivo: O presente artigo tem como objetivo descrever um caso clínico com envolvimento de diversos níveis de desgaste dentário para reabilitação estética com cerâmica de dissilicato de lítio. Relato de caso: Paciente 36 anos, gênero feminino, apresentava insatisfação com seu sorriso devido a forma e a alteração de cor dos seus dentes superiores anteriores e pré-molares. O plano de tratamento consistiu em realizar a troca da coroa metalocerâmica por coroa total cerâmica da unidade 14, coroa total cerâmica nas unidades 11, 21 e 22, facetas cerâmicas nas unidades 15, 13, 12, 23, 24 e 25, osteotomia e gengivoplastia das regiões de 2º prémolar superior esquerdo ao 2º pré-molar superior direito, clareamento dental caseiro da arcada inferior e placa oclusal superior de proteção. O material de escolha para a resolução do caso clínico foi a cerâmica vítrea reforçada à base de dissilicato de lítio, pois, possui um índice de refração de luz semelhante à estrutura dentária, sem interferência significativa da translucidez, além de ser passível de cimentação adesiva por se tratar de uma cerâmica ácido sensível e o tamanho do cristal e a sua disposição favorecem o aumento das propriedades mecânicas da restauração. Conclusão: O plano de tratamento realizado permitiu o restabelecimento da função e estética, com reprodução das características dos dentes naturais e promoção da jovialidade e da harmonia no sorriso(AU)

Introduction:The demand for smile aesthetics is growing in Dentistry, because, often a smile aligned and healthy periodontium are not enough. Dental ceramics, presented as an excellent restorative possibility, since the advancement of adhesion techniques between the dental substrate and the ceramics, becomes more predictable the result with this type of rehabilitation. Objective: This article aims to describe a clinical case involving several levels of dental wear for aesthetic rehabilitation with ceramics. Case Report: A 36-year-old female patient presented dissatisfaction with her smile due to the shape and color alteration of her anterior and premolar upper teeth. The treatment plan consisted of exchanging the metal-ceramic crown for the total ceramic crown of unit 14, total ceramic crown in units 11, 21 and 22, ceramic veneers in units 15, 13, 12, 23, 24 and 25, osteotomy and gingivoplasty of the regions from 2nd left upper premolar to 2nd right upper premolar, home tooth whitening of the lower arch and upper occlusal plate of protection. The material of choice for the resolution of the clinical case was the glass ceramic reinforced on the basis of lithium disilicate because it has a refractive index of light similar to the dental structure, without significant interference of translucency, besides being liable to adhesive cementation because it is a sensitive acid ceramic and the size of the crystal and its disposition favor the increase of the mechanical properties of the restoration. Conclusion: The treatment plan performed allowed the restoration of function and aesthetics, with reproduction of the characteristics of natural teeth and promotion of joviality and harmony in the smile(AU)

Gels containing statherin-derived peptide protect against enamel and dentin erosive tooth wear in vitro.

The effect of gels containing a statherin-derived peptide (Stn) on the protection against enamel and dentin erosive tooth wear (ETW) in vitro was evaluated. Bovine enamel and dentin specimens were divided into 2 groups (n = 15 and 18/group for enamel and dentin, respectively) that were treated with Chitosan or Carboxymethylcellulose (CMC) gels containing Stn15pSpS at 1.88 × 10-5 M or 3.76 × 10-5 M. Chitosan or CMC gels without active ingredients served as negative controls, while chitosan gel containing 1.23% F (as NaF) and acidulated phosphate fluoride gel (1.23% F) served as positive controls. The gels were applied on the specimens for 4 min. Stimulated saliva was collected from 3 donors and used to form a 2-h acquired pellicle on the specimens. Then, the specimens were submitted to an erosive pH cycling protocol 4 times/day for 7 days (0.01 M HCl pH 2.0/45 s, artificial saliva/2 h, and artificial saliva overnight). The gels were applied again during pH cycling, 2 times/day for 4 min after the first and last erosive challenges. Enamel and dentin loss (µm) were assessed by contact profilometry. Scanning electron microscopy (SEM) was analyzed using a cold field emission. Data were analyzed by two-way ANOVA (for chitosan and CMC gels, separately) and Tukey's multiple comparison test. SEM images showed changes to enamel topography after application oft the gels containing Stn or F. Regarding CMC-based gels, for enamel, none of the treatments significantly reduced ETW in comparison with placebo; for dentin, however, gels containing Stn, regardless the concentration, significantly reduced the ETW. Moreover, Chitosan-based gels, regardless the Stn concentration, were able to protect enamel and dentin against ETW. Gels containing Stn might be a new approach to protect against ETW.

Effect of 10% Proanthocyanidin gel on demineralized organic matrix degradation: ELISA method / Efeito do gel de Proantocianidina a 10% na degradação da matriz orgânica desmineralizada: método ELISA

Objective: This study evaluated Proanthocyanidin protective effect on dentin subjected to erosion and its inhibition on degradation of the demineralized organic matrix (DOM). Material and Methods: The tested groups were: G1 - 10% Proanthocyanidin gel (test group), G2 - 1.23% NaF (positive control 1), G3 - 0.012% Chlorhexidine (positive control 2) and G4 ­ Placebo (negative control with no active compound) and two methodologies were performed: contact profilometry and ICTP ELISA method. To quantify dentin wear, profilometry was performed. Data were submitted to Analysis of Variance followed by Fisher's LSD Test. To assess the collagen degradation, ICTP ELISA method was performed. Data were submitted to the Kruskal-Wallis followed by the Dunn ́s test. Simple linear regression and Pearson Correlation test were also performed (p<0.05). Results: The profilometry showed significantly lower wear of G1 when compared to other groups and G2, G3 and G4, which did not present significant difference among them. In the ICTP ELISA analysis, G1 and G4 did not show significant differences and the same happened between G2 and G3. However, G1 and G4 had lower values of collagen degradation compared to groups G2 and G3. Data showed that degraded DOM is a significant predictor to explain the values obtained through the ICTP ELISA. Conclusions: The results allow to verify that 10% proanthocyanidin provided less tooth wear and decreased degradation of the DOM, suggesting a good ability to prevent dentin erosion. The regression analysis also suggests that contact profilometry is a good strategy to quantify dentin wear (AU)

Objetivo: Este estudo avaliou o efeito protetor da proantocianidina na dentina submetida à erosão e sua inibição na degradação da matriz orgânica desmineralizada (MOD). Material e Métodos: Os grupos testados foram: G1 - gel de Proantocianidina 10% (grupo teste), G2 - NaF 1,23% (controle positivo 1), G3 - Clorexidina 0,012% (controle positivo 2) e G4 - Placebo (controle negativo sem princípio ativo) e duas metodologias foram realizadas: perfilometria de contato e método ICTP ELISA. Para quantificar o desgaste da dentina, a perfilometria foi realizada. Os dados foram submetidos à Análise de Variância seguida do Teste LSD de Fisher. Para avaliar a degradação do colágeno, foi realizado o método ICTP ELISA. Resultados: Os dados foram submetidos ao teste de Kruskal-Wallis seguido do teste de Dunn. Regressão linear simples e teste de correlação de Pearson também foram realizados (p<0,05). A perfilometria mostrou desgaste significativamente menor do G1 quando comparado aos outros grupos e G2, G3 e G4, que não apresentaram diferença significativa entre si. Na análise ICTP ELISA, G1 e G4 não apresentaram diferenças significativas e o mesmo ocorreu entre G2 e G3. No entanto, G1 e G4 apresentaram valores menores de degradação do colágeno em relação aos grupos G2 e G3. Os dados mostraram que a MOD degradada é um preditor significativo para explicar os valores obtidos pelo ICTP ELISA. Conclusão: Os resultados permitem verificar que a proantocianidina a 10% proporcionou menor desgaste dentário e diminuição da degradação da MOD, sugerindo uma boa capacidade de prevenir a erosão dentinária. Também sugere que a perfilometria de contato é uma boa estratégia para quantificar o desgaste da dentina (AU)

Tooth wear due to dental attrition among 12-year-old adolescents / Desgaste dentário por atrição entre adolescentes de 12 anos de idade

Aim: To evaluate the prevalence and distribution of tooth wear due to dental attrition among 12-year-old adolescents according to their gender, reports of tooth grinding during sleep/while awake (bruxism), and sleep features related to sleep-disordered breathing. Methods: A cross-sectional study was conducted with 172 adolescents from southeast Brazil. Parents/caregivers answered questions about sociodemographic characteristics; reports of adolescents' tooth grinding during sleep, and sleep features (e.g. sleep duration and position, snoring, drooling on the pillow) in the previous two weeks. Adolescents self-reported the occurrence of tooth clenching/grinding while awake in the previous two weeks. Tooth wear due to dental attrition was assessed by a previously calibrated researcher, using a validated 5-point analogical ordinal occlusal/incisal tooth wear grading scale, with scores ranging from 0 (no wear) to 4 (loss of crown height ≥ 2/3), depending on tooth wear severity. Descriptive statistics and the Mann-Whitney test (p < 0.05) were performed to identify differences in tooth wear due to the distribution of dental attrition, according to adolescents' characteristics. Results: Most adolescents were female (58.0%) and 81.6% of the participants presented tooth wear due to dental attrition within the enamel. Adolescents who snored had a higher number of incisors with tooth wear due to dental attrition (p = 0.035). Females showed a higher number of canines with tooth wear due to dental attrition (p = 0.020). Adolescents whose parents reported tooth grinding during sleep presented a higher number of bicuspids with tooth wear due to dental attrition (p = 0.001). Conclusion:Tooth wear due to dental attrition within the enamel was observed in most adolescents. The distribution, depending on specific groups of teeth, was higher among female adolescents, adolescents' whose parents reported tooth grinding, and adolescents who snored during sleep.

Objetivos: Avaliar a prevalência e distribuição de DDA entre adolescentes de 12 anos de acordo com o sexo, relato de ranger de dentes durante o sono e vigília (bruxismo) e características relacionadas a desordens respiratórias do sono.Método: Desenvolveu-se um estudo transversal com 172 adolescentes do sudeste do Brasil. Seus pais/responsáveis responderam um questionário contendo informações sociodemográficas, relato sobre os filhos rangerem os dentes durante o sono e hábitos do sono dos filhos (duração do sono, posição que dorme, roncar, babar no travesseiro) nas duas últimas semanas. Adolescentes relataram ocorrência de ranger/apertar de dentes durante a vigília nas duas últimas semanas. DDA foi avaliado por um pesquisador previamente calibrado através de uma escala analógica ordinal de cinco pontos de desgaste dentário para faces oclusal/incisal previamente validada, com escores variando de 0 (sem desgaste) a 4 (perda da coroa em altura ≥ 2/3), dependendo da gravidade do desgaste. Análises descritivas e teste de Mann-Whitney (p < 0,05) foram realizados para identificar as diferenças na distribuição de DDA de acordo com as características dos adolescentes.Resultados: A maioria dos adolescentes eram meninas (58,0%) e 81,6% dos participantes apresentaram DDA em esmalte em algum elemento dentário. Adolescentes que rocavam apresentavam mais incisivos com DDA (p = 0.035). Meninas apresentaram maior número de caninos com DDA (p = 0.020). Adolescentes que rangiam os dentes durante a noite apresentaram maior número de pré-molares com DDA (p = 0.001).Conclusão: Desgaste dentário por atrição em esmalte foi observado na maioria dos adolescentes. A distribuição, dependendo de grupos de dentes específicos, foi maior entre meninas, adolescentes que roncavam durante o sono e que rangiam os dentes durante o sono.

Cárie dentária e lesões cervicais não cariosas em idosos independentes: características individuais, ambientais e salivares / Dental caries and noncarious cervical lesions in independent elderly: individual, environmental, and salivary characteristics

O envelhecimento populacional característico das mudanças demográficas atuais vem sendo acompanhado por maior preservação dentária. Pessoas idosas possuem particularidades que as tornam mais susceptíveis ao desenvolvimento de alterações bucais como cárie dentária e lesões cervicais não cariosas (LCNC). Com a idade avançada, a prevalência da cárie dentária aumenta, e as LCNC tornam-se mais comuns e graves. O objetivo desse estudo foi avaliar a frequência de cárie dentária e de LCNC em idosos independentes, além de investigar associações entre proteínas salivares e a presença de cárie, e entre LCNC e fatores oclusais em dois artigos distintos. Neste estudo transversal, parte dos dados foi coletada usando entrevista estruturada. A experiência de cárie e de LCNC foi determinada pelos índices de Dentes Cariados, Perdidos e Obturados (CPO-D), Raízes Cariadas e Obturadas (CO- R) e Índice de Desgaste Dentário (TWI), coletados em exame clínico. Ao total, foram avaliados 127 indivíduos, com idade entre 60 e 84 anos. A média do CPO-D foi 23,86 e frequência de cárie dentária foi 65,4%. Para LCNC, a frequência de lesões com profundidade superior a 1mm foi 65,4%. Modelos 3D foram obtidos a partir de escaneamento intraoral para análise oclusal, morfologia e morfometria das LCNC, em 53 idosos, totalizando 1245 dentes com frequência absoluta de 352 (28,27%) dentes com LCNC. Lesões arredondadas possuíam maior altura, enquanto lesões anguladas apresentaram maior profundidade. Dentes com LCNC apresentaram maior proporção de facetas de desgaste, contatos oclusais intensos e contatos de interferência oclusal. Saliva em repouso foi coletada durante 5 minutos para quantificação do fluxo, pH, capacidade de tamponamento e proteínas salivares por meio de análise proteômica realizada em 80 participantes. Os indivíduos foram subdivididos em um grupo sem cárie ativa (47,5%) e outros dois grupos com lesões de cárie divididos pela mediana de dentes acometidos: £2 dentes (31,3%) e >2 dentes com cárie ativa (21,3%). Na análise proteômica, foram quantificadas 665 proteínas, envolvidas em processos de imunidade inata, modulação enzimática, atividade dos íons cálcio e adesão celular. Dessas, 68 proteínas demonstraram diferenças significativas de abundância entre os grupos. O conjunto de dados proteômicos foi correlacionado com índice de placa dentária visível, experiência de cárie radicular, fluxo salivar, capacidade tampão, pH e porcentagem de ingestão de açúcar. Com as correlações, 87 candidatos a biomarcadores foram identificados e 19 repetiram a significância da análise anterior. Dessa forma, os resultados deste estudo indicam potenciais biomarcadores e características individualizadas do paciente idoso que podem contribuir para o direcionamento do manejo clínico desse estrato populacional.

Population aging, characteristic of current demographic changes, has been accompanied by greater dental preservation. Older individuals possess particularities that make them more susceptible to the development of oral conditions such as dental caries and noncarious cervical lesions (NCCL). With advanced age, the prevalence of dental caries increases, and NCCL becomes more common and severe. The aim of this study was to assess the frequency of dental caries and NCCL in independent older individuals, as well as to investigate associations between salivary proteins and the presence of caries, and between NCCL and occlusal factors in two distinct articles. In this cross-sectional study, part of the data was collected using a structured interview. Dental caries and NCCL experience were determined by the Decayed, Missing, and Filled Teeth (DMFT) index, Decayed and Filled Roots (DFR) index, and Tooth Wear Index (TWI), collected through a clinical examination. In total, 127 individuals aged between 60 and 84 years were evaluated. The mean DMFT was 23.86, and the frequency of dental caries was 65.4%. For NCCL, the frequency of lesions with a depth greater than 1mm was 65.4%. 3D models were obtained from intraoral scanning for occlusal analysis, morphology, and morphometry of NCCL, in 53 elderly individuals, totaling 1245 teeth with a frequency of 352 (28.27%) teeth with NCCL. Saucer lesions had greater height, while wedge-shaped lesions showed greater depth. Teeth with NCCL presented a higher proportion of wear facets, intense occlusal contacts, and occlusal interference contacts. Unstimulated saliva was collected for 5 minutes to quantify flow, pH, buffering capacity, and salivary proteins through proteomic analysis performed on 80 participants. Individuals were subdivided into a group without active caries (47.5%) and two other groups with caries lesions divided by the median of affected teeth: ≤2 teeth (31.3%) and >2 teeth with active caries (21.3%). In the proteomic analysis, 665 proteins involved in innate immunity, enzymatic modulation, calcium ion activity, and cell adhesion processes were quantified. Of these, 68 proteins showed significant differences in abundance between the groups. The proteomic dataset was correlated with visible dental plaque index, radicular caries experience, salivary flow, buffering capacity, pH, and percentage of sugar intake. Through these correlations, 87 potential biomarker candidates were identified, and 19 replicated the significance of the previous analysis. Thus, the results of this study indicate potential biomarkers and individualized characteristics of elderly patients that may contribute to directing the clinical management of this population stratum.

The ability of different formulations of artificial saliva to protect dentin from erosive wear / Ação protetora de diferentes formulações de saliva artificial no desgaste erosivo

Objective: Evaluate the protective effect of artificial saliva formulations associated or not with mucin on dentin. Materials and Methods: Bovine dentin specimens were randomly allocated to 10 groups (n = 20) according to the artificial saliva tested and the presence or absence of mucin: Amaechi et al. (1998); Klimek et al. (1982); Vieira et al. (2005) and Eisenburger et al. (2001) and deionized water (control). Samples were submitted to an erosive cycle consisting of two immersions of 120 min in the saliva, followed by 1 min in hydrochloric acid solution, and new storage in saliva for 120 min. Surface loss (µm) was measured before and after the cycle. Data were analyzed using 2-way ANOVA and Tukey's test (p < 0.05). Results: A significant difference was observed for the saliva formulation but not for the presence of mucin. The deionized water provided the highest surface loss and the Eisenburger's saliva formulation the lowest. The groups testing the Amaechi, Klimek, and Vieira saliva did not present significant differences. Conclusion: Eisenburger's saliva formulation provides a higher protective effect against dentin erosion. The presence of mucin did not increase the erosion-preventive effect of artificial saliva formulations. (AU)

Objetivo: Avaliar o efeito protetor de formulações de saliva artificial associadas ou não à mucina sobre a dentina submetida a erosão. Material e Métodos: Espécimes de dentina bovina foram alocados em 10 grupos (n = 20) de acordo com a saliva testada e a presença ou ausência de mucina: . Amaechi et al. (1998); Klimek et al. (1982); Vieira e cols. (2005), Eisenburger et al (2001) e agua deionizada (controle). As amostras foram submetidas a um ciclo erosivo composto por duas imersões de 120 min na saliva, seguidas de 1 min em solução de ácido clorídrico e novo armazenamento na saliva por 120 min. A perda de superfície (µm) foi medida antes e depois do ciclo. Os dados foram analisados usando ANOVA 2 fatores e teste de Tukey (p <0,05). Resultados: Foi observada diferença significativa para a formulação de saliva, mas não para a presença de mucina. A água deionizada proporcionou a maior perda de superfície e a formulação de saliva de Eisenburger a menor. Os grupos que testaram a saliva Amaechi, Klimek e Vieira não apresentaram diferenças significativas entre si. Conclusão: A formulação de saliva de Eisenburger fornece o maior efeito protetor contra a erosão dentinária e a presença de mucina não aumentou o efeito preventivo de erosão de formulações de saliva artificial (AU).

Effects of different toothpaste formulations on erosive tooth wear prevention: systematic review / Efeitos de diferentes dentifrícios na prevenção do desgaste dentário erosivo: revisão sistemática de literatura

Objective: erosive tooth wear is a multifactorial condition that results in loss of dental hard tissue, caused by a chemical and mechanical process. This paper aims to carry out a systematic review presenting the effects of different toothpaste formulations on the loss of dental enamel surface in vitro. Material and Methods: the searches were performed in the databases PubMed, Web of Science, LILACS and Scielo. Articles published from 2010 to 2020 were filtered, without language restriction. Articles that included abrasion and erosion protocols were searched, as they were more similar to clinical reality, since toothpaste is applied through tooth brushing. The searches with descriptors and free terms on the topic resulted in 992 articles, however only 12 were within the search criteria. Results: the selected studies appointed that association of conventional fluorides (NaF) with metallic fluorides can be a promising strategy for the reduction of surface loss by erosive tooth wear. Toothpastes containing sodium fluoride, as well as tin without chitosan, showed a reduction in surface loss, considered sufficient for individuals with medium exposure to acids. In children's toothpastes, the one containing sodium fluoride showed a reduction in surface loss when compared to non-fluoride dentifrices. Conclusion: different protocols may result in less or greater loss of enamel surface, and methodological differences should be considered. To clarify the effects of dentifrices on erosive tooth wear, other properties of dentifrices should be investigated. (AU)

Objetivo: o desgaste erosivo é uma condição multifatorial que resulta em perda de tecido duro dentário, causado por um processo químico e mecânico. Este trabalho tem como objetivo realizar uma revisão sistemática de literatura apresentando os efeitos de diferentes formulações de dentifrícios na perda de superfície de esmalte dentário in vitro. Material e Métodos: a busca foi realizada nas bases de dados PubMed, Web of Science, LILACS e Scielo. Foram filtrados artigos publicados no intervalo de 2010 a 2020, sem restrição de idioma. Buscou-se artigos que incluíssem protocolos de abrasão e erosão, por mais se assemelhar a realidade clínica, uma vez que o dentifrício é aplicado através da escovação dentária. A busca com descritores e termos livres sobre o tema encontrou 992 artigos, entretanto somente 12 estavam dentro dos critérios da pesquisa. Resultados: os estudos selecionados apontaram que associação dos fluoretos convencionais (NaF) com os metálicos pode ser uma estratégia promissora para a redução de perda de superfície pelo desgaste dentário erosivo. Dentifrícios contendo fluoreto de sódio, assim como estanho sem quitosana, apresentaram redução na perda de superfície, sendo considerada suficiente para indivíduos com exposição média aos ácidos. Em dentifrícios infantis, aquele que continha fluoreto de sódio apresentou uma redução de perda de superfície quando comparado com dentifrícios sem fluoreto. Conclusão:diferentes protocolos podem resultar em menor ou maior perda de superfície de esmalte e as diferenças (AU)

Knowledge and attitudes related to erosive tooth wear of professional wine tasters: a cross-sectional study / Conhecimentos e atitudes relacionadas ao desgaste dentário erosivo de provadores de vinho profissionais: um estudo transversal

Objective: this study aimed to evaluate knowledge and attitudes of professional wine tasters about erosive tooth wear. Material and Methods: two questionnaires were applied to 56 wine tasters during the 25th National Evaluation of Wines - Safra 2017 in Bento Gonçalves, Rio Grande do Sul. Descriptive data analysis and the Fisher's exact test were performed (p < 0.05). Results: for the analysis, 56 volunteers aged 25-76 years were included. Most of the volunteers reported attending dentist once a year (55.35%) and their teeth become sorer after ingesting liquids or acid foods (32.14%) over time. The majority (82.14%) believe wine tasting may have teeth effects and have already heard about erosive tooth wear (51.78%). However, when asked about symptomatology, more than half (53.57%) reported not to know. Brushing teeth immediately after ingesting something (37.5%) and increasing the brushing frequency (33.92%) were the most cited treatment options. The habit of using mouthwash solutions was significantly associated with the professionals age (p = 0.039). Conclusion: the volunteers reported a high intake of acid substances and, although most of them reported to consult dentist regularly and have already heard about erosive tooth wear, knowledge about this condition is still limited among these professionals. (AU)

Objetivo: o objetivo desse estudo foi avaliar o conhecimento e as atitudes de provadores de vinho profissionais relacionadas ao desgaste dentário erosivo. Material e Métodos: dois questionários foram aplicados a 56 provadores de vinho durante a 25ª Avaliação Nacional de Vinhos - Safra 2017 no município de Bento Gonçalves, Rio Grande do Sul. Foi realizada a análise descritiva dos dados e o teste Exato de Fisher (p < 0.05). Resultados: na análise foram incluídos 56 voluntários com idade entre 25 e 76 anos. A maioria dos voluntários relatou frequentar o dentista uma vez por ano (55,35%) e que seus dentes, com o passar do tempo, tornaram-se mais doloridos ao ingerir líquidos ou alimentos ácidos (32,14%). Mais da metade (82,14%) acreditam que as provas de vinho podem causar algum efeito sobre os dentes e já ouviram falar em desgaste dentário erosivo (51,78%). Porém, quando questionados sobre a sintomatologia, a maioria (53,57%) afirmou não ter conhecimento. Escovar os dentes imediatamente após ingerir algo (37,5%) e aumentar a frequência de escovação (33,92%) foram as opções mais compreendidas como tratamento. Utilizar soluções para bochecho esteve significativamente associado à idade dos profissionais (p=0,039). Conclusão: provadores de vinho profissionais relataram alta ingestão de substâncias ácidas e, embora a maioria consulte pelo menos uma vez por ano o dentista e já tenha ouvido falar a respeito do desgaste dentário erosivo, o conhecimento sobre essa condição ainda é limitado entre esses profissionais. (AU)

Wear of dental ceramics / Desgaste das cerâmicas odontológicas

Com base no desenvolvimento da odontologia adesiva, restaurações minimamente invasivas em cerâmica são utilizadas como alternativas para restaurar um dente. As cerâmicas odontológicas são amplamente aplicadas na área odontológica principalmente devido à sua estética e resistência mecânica. Uma das propriedades da cerâmica a ser bem conhecida antes de seu uso, é a resistência ao desgaste que deve ser compatível com o comportamento de desgaste do antagonista para evitar desempenhos indesejados. Portanto, vários métodos têm sido realizados para avaliar o comportamento do desgaste dos materiais cerâmicos considerando diferentes condições presentes no complexo meio oral. Este estudo teve como objetivo compilar os métodos utilizados para investigar o desgaste das cerâmicas odontológicas e descrever os mecanismos de desgaste envolvidos nos mesmos. A obtenção e análise de dados também é abordada para discutir os resultados obtidos a partir de diferentes métodos, bem como a análise clínica do desgaste e perspectivas futuras sobre esse tema. Em conclusão, muitas metodologias estão disponíveis para medir o desgaste cerâmico. Portanto, os métodos devem ser selecionados com base na relevência clínica de cada estudo e devem seguir parâmetros previamente relatados para padronização, permitindo a comparação da literatura (AU)

Based on the development of adhesive dentistry, minimally invasive restorations in ceramics are used as alternatives to restore a tooth. Dental ceramics are largely applied in the dentistry field mainly due to their esthetic and mechanical strength. One of the ceramic properties to be well known before its use is the wear resistance that should be compatible with the antagonist wear behavior to avoid unwanted performance. Therefore, several methods have been performed to assess the ceramic materials wear behavior considering different conditions present in the complex oral medium. This study aimed to compile the methods used to investigate dental ceramics wear and to describe the wear mechanisms involved on them. Obtaining and analyzing data is also addressed to discuss the results obtained from different methods, as well as the clinical analysis of wear and future perspectives on this topic. In conclusion, many methodologies are available to measure the ceramic wear. Therefore, the methods must be selected based on the clinical significance of each study and should follow previously reported parameters for standardization, allowing literature comparison. (AU)