Soft Bioelectronics for Therapeutics.

Soft bioelectronics play an increasingly crucial role in high-precision therapeutics due to their softness, biocompatibility, clinical accuracy, long-term stability, and patient-friendliness. In this review, we provide a comprehensive overview of the latest representative therapeutic applications of advanced soft bioelectronics, ranging from wearable therapeutics for skin wounds, diabetes, ophthalmic diseases, muscle disorders, and other diseases to implantable therapeutics against complex diseases, such as cardiac arrhythmias, cancer, neurological diseases, and others. We also highlight key challenges and opportunities for future clinical translation and commercialization of soft therapeutic bioelectronics toward personalized medicine.

Implantable Electronic Medicine Enabled by Bioresorbable Microneedles for Wireless Electrotherapy and Drug Delivery.

A combined treatment using medication and electrostimulation increases its effectiveness in comparison with one treatment alone. However, the organic integration of two strategies in one miniaturized system for practical usage has seldom been reported. This article reports an implantable electronic medicine based on bioresorbable microneedle devices that is activated wirelessly for electrostimulation and sustainable delivery of anti-inflammatory drugs. The electronic medicine is composed of a radio frequency wireless power transmission system and a drug-loaded microneedle structure, all fabricated with bioresorbable materials. In a rat skeletal muscle injury model, periodic electrostimulation regulates cell behaviors and tissue regeneration while the anti-inflammatory drugs prevent inflammation, which ultimately enhance the skeletal muscle regeneration. Finally, the electronic medicine is fully bioresorbable, excluding the second surgery for device removal.

A method for in vivo treatment verification of IMRT and VMAT based on electronic portal imaging device.

BACKGROUND: Intensity-modulated radiation therapy (IMRT) and volume-modulated arc therapy (VMAT) are rather complex treatment techniques and require patient-specific quality assurance procedures. Electronic portal imaging devices (EPID) are increasingly used in the verification of radiation therapy (RT). This work aims to develop a novel model to predict the EPID transmission image (TI) with fluence maps from the RT plan. The predicted TI is compared with the measured TI for in vivo treatment verification. METHODS: The fluence map was extracted from the RT plan and corrections of penumbra, response, global field output, attenuation, and scatter were applied before the TI was calculated. The parameters used in the model were calculated separately for central axis and off-axis points using a series of EPID measurement data. Our model was evaluated using a CIRS thorax phantom and 20 clinical plans (10 IMRT and 10 VMAT) optimized for head and neck, breast, and rectum treatments. RESULTS: Comparisons of the predicted and measured images were carried out using a global gamma analysis of 3%/2 mm (10% threshold) to validate the accuracy of the model. The gamma pass rates for IMRT and VMAT were greater than 97.2% and 94.5% at 3%/2 mm, respectively. CONCLUSION: We have developed an accurate and straightforward EPID-based quality assurance model that can potentially be used for in vivo treatment verification of the IMRT and VMAT delivery.

Accuracy of soft tissue balancing in total knee arthroplasty using surgeon-defined assessment versus a gap-balancer or electronic sensor.

BACKGROUND: Soft tissue balancing is essential for the success of total knee arthroplasty (TKA) and is mainly dependent on surgeon-defined assessment (SDA) or a gap-balancer (GB). However, an electronic sensor has been developed to objectively measure the gap pressure. This study aimed to evaluate the accuracy of soft tissue balancing using SDA and GB compared with a sensor. METHODS: Forty-eight patients undergoing TKA (60 knees) were prospectively enrolled. Soft tissue balancing was sequentially performed using SDA, a GB, and an electronic sensor. We compared the SDA, GB, and sensor data to calculate the sensitivity, specificity, and accuracy at 0°, 45°, 90°, and 120° flexion. Cumulative summation (CUSUM) analysis was performed to assess the surgeon's performance during the sensor introductory phase. RESULTS: The sensitivity of SDA was 63.3%, 68.3%, 80.0%, and 80.0% at 0°, 45°, 90°, and 120°, respectively. The accuracy of the GB compared with sensor data was 76.7% and 71.7% at 0° and 90°, respectively. Cohen's kappa coefficient for the accuracy of the GB was 0.406 at 0° (moderate agreement) and 0.227 at 90° (fair agreement). The CUSUM 0° line achieved good prior performance at case 45, CUSUM 90° and 120° showed a trend toward good prior performance, while CUSUM 45° reached poor prior performance at case 8. CONCLUSION: SDA was a poor predictor of knee balance. GB improved the accuracy of soft tissue balancing, but was still less accurate than the sensor, particularly for unbalanced knees. SDA improved with ongoing use of the sensor, except at 45° flexion.

A Millimeter-Scale Crystal-Less MICS Transceiver for Insertable Smart Pills.

This paper presents a millimeter-scale crystal-less wireless transceiver for volume-constrained insertable pills. Operating in the 402-405 MHz medical implant communication service (MICS) band, the phase-tracking receiver-based over-the-air carrier recovery has a ±160 ppm coverage. A fully integrated adaptive antenna impedance matching solution is proposed to calibrate the antenna impedance variation inside the body. A tunable matching network (TMN) with single inductor performs impedance matching for both transmitter (TX) and receiver (RX) and TX/RX mode switching. To dynamically calibrate the antenna impedance variation over different locations and diet conditions, a loop-back power detector using self-mixing is adopted, which expands the power contour up to 4.8 VSWR. The transceiver is implemented in a 40-nm CMOS technology, occupying 2 mm2 die area. The transceiver chip and a miniature antenna are integrated in a 3.5 × 15 mm2 area prototype wireless module. It has a receiver sensitivity of -90 dBm at 200 kbps data rate and delivers up to - 25 dBm EIRP in the wireless measurement with a liquid phantom.

Injectable Sensors Based on Passive Rectification of Volume-Conducted Currents.

Sensing implants that can be deployed by catheterization or by injection are preferable over implants requiring invasive surgery. However, present powering methods for active implants and present interrogation methods for passive implants require bulky parts within the implants that hinder the development of such minimally invasive devices. In this article, we propose a novel approach that potentially enables the development of passive sensing systems overcoming the limitations of previous implantable sensing systems in terms of miniaturization. In this approach implants are shaped as thread-like devices suitable for implantation by injection. Their basic structure consists of a thin elongated body with two electrodes at opposite ends and a simple and small circuit made up of a diode, a capacitor and a resistor. The interrogation method to obtain measurements from the implants consists in applying innocuous bursts of high frequency (≥1 MHz) alternating current that reach the implants by volume conduction and in capturing and processing the voltage signals that the implants produce after the bursts. As proof-of-concept, and for illustrating how to put in practice this novel approach, here we describe the development and characterization of a system for measuring the conductivity of tissues surrounding the implant. We also describe the implementation and the in vitro validation of a 0.95 mm-thick, flexible injectable implant made of off-the-shelf components. For conductivities ranging from about 0.2 to 0.8 S/m, when compared to a commercial conductivity meter, the accuracy of the implemented system was about ±10%.

Morphing electronics enable neuromodulation in growing tissue.

Bioelectronics for modulating the nervous system have shown promise in treating neurological diseases1-3. However, their fixed dimensions cannot accommodate rapid tissue growth4,5 and may impair development6. For infants, children and adolescents, once implanted devices are outgrown, additional surgeries are often needed for device replacement, leading to repeated interventions and complications6-8. Here, we address this limitation with morphing electronics, which adapt to in vivo nerve tissue growth with minimal mechanical constraint. We design and fabricate multilayered morphing electronics, consisting of viscoplastic electrodes and a strain sensor that eliminate the stress at the interface between the electronics and growing tissue. The ability of morphing electronics to self-heal during implantation surgery allows a reconfigurable and seamless neural interface. During the fastest growth period in rats, morphing electronics caused minimal damage to the rat nerve, which grows 2.4-fold in diameter, and allowed chronic electrical stimulation and monitoring for 2 months without disruption of functional behavior. Morphing electronics offers a path toward growth-adaptive pediatric electronic medicine.

Light-Dependent Resistors as Dosimetric Sensors in Radiotherapy.

Safe quality control of radiotherapy treatments lies in reliable dosimetric sensors. Currently, ionization chambers and solid-state diodes along with electrometers as readout systems are accomplishing this task. In this work, we present a well-known and low-cost semiconductor sensor, the light-dependent resistor (LDR), as an alternative to the existing sensing devices for dosimetry. To demonstrate this, a complete characterization of the response to radiation of commercial LDRs has been conducted in terms of sensitivity, reproducibility and thermal correction under different bias voltages. Irradiation sessions have been applied under the common conditions in radiotherapy treatments using a hospital linear accelerator. Moreover, the same electrometer used for the ionization chamber has also been successfully used for LDRs. In comparison with the sensitivity achieved for the ionization chamber (0.2 nC/cGy at 400 V bias voltage), higher sensitivities have been measured for the proposed LDRs, ranging from 0.24 to 1.04 nC/cGy at bias voltages from 30 to 150 V, with a reproducibility uncertainty among samples of around 10%. In addition, LDR temperature dependence has been properly modeled using the simple thermistor model so that an easy thermal drift correction of dose measurements can be applied. Therefore, experimental results show that LDRs can be a reliable alternative to dosimetric sensors with the advantages of low size, affordable cost and the fact that it could be adopted with minimal changes in routine dosimetry quality control since the same readout system is fully compatible.

An electronic alert system increases screening for hepatitis B and C and improves management of patients with haematological disorders.

Treatment of haematological disorders in patients with chronic hepatitis B or resolved infection (anti-HBc-positive) is associated with a risk of hepatitis B reactivation. Moreover, patients with chronic hepatitis C have a higher risk of haematological malignancies than general population. An electronic alert system was developed to promote screening of hepatitis B (HBV) and C (HCV) in patients starting haematological therapies. The system included screening and linkage to care and a request for testing in those without data. From March, 2017 to March, 2018 data from 420 consecutive patients with haematological diseases were included. At first prescription before the alerts, the HCV and HBV screening rate was 60.5%. Following the alerts, an additional 115 were screened, increasing the overall screening rate to 87.9%. Anti-HBc alone was detected in 57, anti-HCV in 13, and HBsAg in 2 patients. Overall, 68% of patients with any viral hepatitis markers were previously not know, and the impact was particularly important for anti-HBc detection (47/57 unknown). Nucleoside analogues were prescribed in 28 (49.1%) anti-HBc-positive and the 2 HBsAg-positive patients. Prospective follow-up with HBV DNA and HBsAg testing showed no cases of HBV reactivation. An estimated 1.2 HBV reactivations were avoided as consequence of the alert system. In summary, an electronic alert system increased viral hepatitis screening in patients receiving haematological treatment and led to improvements in the management of these patients, including avoided HBV reactivation.

Multicenter randomized study on the comparison between electronic and traditional chest drainage systems.

BACKGROUND: In patients submitted to major pulmonary resection, the postoperative length of stay is mainly influenced by the duration of air leaks and chest tube removal. The measurement of air leaks largely relies on traditional chest drainage systems which are prone to subjective interpretation. Difficulty in differentiating between active air leaks and bubbles due to a pleural space effect may also lead to tentative drain clamping and prolonged time for chest drain removal. New digital systems allow continuous monitoring of air leaks, identifying subtle leakage that may be not visible during daily patient evaluation. Moreover, an objective assessment of air leaks may lead to a reduced interobserver variability and to an optimized timing for chest tube removal. METHODS: This study is a prospective randomized, interventional, multicenter trial designed to compare an electronic chest drainage system (Drentech™ Palm Evo) with a traditional system (Drentech™ Compact) in a cohort of patients undergoing pulmonary lobectomy through a standard three-port video-assisted thoracic surgery approach for both benign and malignant disease. The study will enroll 382 patients in three Italian centers. The duration of chest drainage and the length of hospital stay will be evaluated in the two groups. Moreover, the study will evaluate whether the use of a digital chest system compared with a traditional system reduces the interobserver variability. Finally, it will evaluate whether the digital drain system may help in distinguishing an active air leak from a pleural space effect, by the digital assessment of intrapleural differential pressure, and in identifying potential predictors of prolonged air leaks. DISCUSSION: To date, few studies have been performed to evaluate the clinical impact of digital drainage systems. The proposed prospective randomized trial will provide new knowledge to this research area by investigating and comparing the difference between digital and traditional chest drain systems. In particular, the objectives of this project are to evaluate the feasibility and usefulness of digital chest drainages and to provide new tools to identify patients at higher risk of developing prolonged air leaks. TRIAL REGISTRATION: ClinicalTrials.gov, NCT03536130. Retrospectively registered on 24 May 2018.

Recent developments on foaming mechanical and electronic techniques for the management of varicose veins.

Introduction: Varicose veins are a common disease, causing significant impairment of quality of life to afflicted individuals. Conventional surgery has represented the traditional treatment for years, with significant post-operative complications. By the end of the 20th century, novel approaches had been developed to induce biochemical sclerosis into the treated vein in order to exclude it from blood circulation.Areas covered: Foaming techniques for treatment of varicose veins, both clinically-approved methods and those under experimental studies. A brief description of cavitation, which is the basis of microbubbles formation, and an overview of foam properties have been also provided, including a discussion on clinical efficacy and safety profile.Expert commentary: Foam sclerotherapy has rapidly gained popularity since it represents the most minimally invasive and cost-effective procedure in the short term. Several different methods of foam preparation have been described in literature. In general, the foam generation method may affect characteristics such as stability and bubble size distribution, which in turn affect the therapeutic action of foam itself. Therefore, the selection of a suitable foaming technique is of importance for treatment success. Future developments on foaming techniques are expected to make sclerotherapy, already an effective treatment, even safer and more versatile therapeutic procedure.

A simple and efficient method to measure beam attenuation through a radiotherapy treatment couch and immobilization devices.

We propose a simple and efficient method to measure beam attenuation in one or two dimensions using an amorphous silicon electronic portal imaging device (a-Si EPID). The proposed method was validated against ionization chamber measurements. Beam attenuation through treatment couches (Varian Medical Systems) and immobilization devices (CIVCO Radiotherapy, USA) was examined. The dependency of beam attenuation on field size, photon energy, thickness of the couch, and the presence of a phantom were studied. Attenuation images were derived by computing the percentage difference between images obtained without and with a couch or immobilization devices determining the percentage of attenuation at the center and the mean attenuation. The beam attenuation measurements obtained with an a-Si EPID and an ionization chamber agreed to within ± 0.10 to 1.80%. No difference was noted between the center and mean of an attenuated image for a small field size of 5 × 5 cm2, whereas a large field size of 15 × 15 cm2 exhibited differences of up to 1.13%. For an 18 MV beam, the a-Si EPID required additional build-up material for accurate assessment of beam attenuation. The a-Si EPID could measure differences in beam attenuation through an image guided radiotherapy (IGRT) couch regardless of the variabilities in couch thickness. Interestingly, the addition of a phantom reduced the magnitude of attenuation by approximately 1.20% for a field size of 15 × 15 cm2. A simple method is proposed that provides the user with beam attenuation data in either 2D or 1D within a few minutes.

[Study on the Quick Daily Check for Medical Electron LINAC].

This study presents an electronic portal imaging devices (EPIDs) based on daily check tool for Linac that is usable for different cancer centers.Several images of open rectangle fields were acquired with EPID and the key items of daily Linac check were derived from the obtained images using an in-house developed automatic analysis software.The experiment results showed that each parameter calculated by this tool is as reliable as the corresponding result measured by the commercial quality assurance devices and its measuring efficiency is much higher.

An automated hybrid bioelectronic system for autogenous restoration of sinus rhythm in atrial fibrillation.

Because of suboptimal therapeutic strategies, restoration of sinus rhythm in symptomatic atrial fibrillation (AF) often requires in-hospital delivery of high-voltage shocks, thereby precluding ambulatory AF termination. Continuous, rapid restoration of sinus rhythm is desired given the recurring and progressive nature of AF. Here, we present an automated hybrid bioelectronic system for shock-free termination of AF that enables the heart to act as an electric current generator for autogenous restoration of sinus rhythm. We show that local, right atrial delivery of adenoassociated virus vectors encoding a light-gated depolarizing ion channel results in efficient and spatially confined transgene expression. Activation of an implanted intrathoracic light-emitting diode device allows for termination of AF by illuminating part of the atria. Combining this newly obtained antiarrhythmic effector function of the heart with the arrhythmia detector function of a machine-based cardiac rhythm monitor in the closed chest of adult rats allowed automated and rapid arrhythmia detection and termination in a safe, effective, repetitive, yet shock-free manner. These findings hold translational potential for the development of shock-free antiarrhythmic device therapy for ambulatory treatment of AF.

Flexible Electronics toward Wearable Sensing.

Wearable sensors play a crucial role in realizing personalized medicine, as they can continuously collect data from the human body to capture meaningful health status changes in time for preventive intervention. However, motion artifacts and mechanical mismatches between conventional rigid electronic materials and soft skin often lead to substantial sensor errors during epidermal measurement. Because of its unique properties such as high flexibility and conformability, flexible electronics enables a natural interaction between electronics and the human body. In this Account, we summarize our recent studies on the design of flexible electronic devices and systems for physical and chemical monitoring. Material innovation, sensor design, device fabrication, system integration, and human studies employed toward continuous and noninvasive wearable sensing are discussed. A flexible electronic device typically contains several key components, including the substrate, the active layer, and the interface layer. The inorganic-nanomaterials-based active layer (prepared by a physical transfer or solution process) is shown to have good physicochemical properties, electron/hole mobility, and mechanical strength. Flexible electronics based on the printed and transferred active materials has shown great promise for physical sensing. For example, integrating a nanowire transistor array for the active matrix and a conductive pressure-sensitive rubber enables tactile pressure mapping; tactile-pressure-sensitive e-skin and organic light-emitting diodes can be integrated for instantaneous pressure visualization. Such printed sensors have been applied as wearable patches to monitor skin temperature, electrocardiograms, and human activities. In addition, liquid metals could serve as an attractive candidate for flexible electronics because of their excellent conductivity, flexibility, and stretchability. Liquid-metal-enabled electronics (based on liquid-liquid heterojunctions and embedded microchannels) have been utilized to monitor a wide range of physiological parameters (e.g., pulse and temperature). Despite the rapid growth in wearable sensing technologies, there is an urgent need for the development of flexible devices that can capture molecular data from the human body to retrieve more insightful health information. We have developed a wearable and flexible sweat-sensing platform toward real-time multiplexed perspiration analysis. An integrated iontophoresis module on a wearable sweat sensor could enable autonomous and programmed sweat extraction. A microfluidics-based sensing system was demonstrated for sweat sampling, sensing, and sweat rate analysis. Roll-to-roll gravure printing allows for mass production of high-performance flexible chemical sensors at low cost. These wearable and flexible sweat sensors have shown great promise in dehydration monitoring, cystic fibrosis diagnosis, drug monitoring, and noninvasive glucose monitoring. Future work in this field should focus on designing robust wearable sensing systems to accurately collect data from the human body and on large-scale human studies to determine how the measured physical and chemical information relates to the individual's specific health conditions. Further research in these directions, along with the large sets of data collected via these wearable and flexible sensing technologies, will have a significant impact on future personalized healthcare.

[Three-dimensional Medical Electronic Laparoscope System].

This paper presents a three-dimensional electronic laparoscopy system, including three-dimensional laparoscope pipe and medical video system. The three-dimensional laparoscope pipe adopts a dual-optical structure, which can collect three-dimensional information of the surgical region. By selecting a reasonable initial structure, the MTF curve of the objective lens is close to the diffraction limit, and the distortion is less than 25%. The medical video system also achieved high-definition image with 1 080 P, 30 Hz by GPU. At the mean time, the three-dimensional electronic laparoscope has achieved quantitative production and has been tested in a number of animals, which has broad application prospects and significant clinical application value.

Online tool for monitoring adverse events in patients with cancer during treatment (eRAPID): field testing in a clinical setting.

OBJECTIVES: Electronic patient self-Reporting of Adverse-events: Patient Information and aDvice (eRAPID) is an online system developed to support patient care during cancer treatment by improving the detection and management of treatment-related symptoms. Patients can complete symptom reports from home and receive severity-based self-management advice, including notifications to contact the hospital for severe symptoms. Patient data are available in electronic records for staff to review. Prior to the commencement of a randomised controlled trial (RCT), field testing of the intervention was undertaken to troubleshoot practical issues with intervention integration in clinical practice. DESIGN: Observational clinical field testing. SETTING: Medical oncology breast service in a UK cancer centre. PARTICIPANTS: 12 patients receiving chemotherapy for early breast cancer and 10 health professionals (oncologists and specialist nurses). INTERVENTION: Patients were asked to use the eRAPID intervention and complete weekly online symptom reports during four cycles of chemotherapy. Clinical staff were invited to access and use patient data in clinical assessments. ANALYSIS: Descriptive data on the frequency of online symptom report completion and severe symptom notifications were collated. Verbal and written feedback was collected from patients and staff and semistructured interviews were conducted to explore patient experiences. Interviews were transcribed and analysed thematically. RESULTS: The testing ran from January 2014 to March 2014. Feedback from patients and staff was largely positive. Patients described eRAPID as 'reassuring' and 'comforting' and valued the tailored management advice. Several changes were made to refine eRAPID. In particular, improvement of the clinical notification, patient reminder systems and changes to patient and staff training. CONCLUSIONS: The field testing generated valuable results used to guide refinement of eRAPID prior to formal intervention evaluation. Feedback indicated that eRAPID has the potential to improve patients' self-efficacy, knowledge and confidence with managing symptoms during treatment. A large-scale RCT is underway with data collection due to finish in October 2018.

Defined cell adhesion for silicon-based implant materials by using vapor-deposited functional coatings.

The field of implantable electronics relies on using silicon materials due to the merits of a well-established fabrication process and favorable properties; of particular interest is the surface modification of such materials. In the present study, we introduce a surface modification technique based on coatings of functionalized Parylene on silicon substrates, where the modified layers provide a defined cell adhesion capability for the resultant silicon materials/devices. Functionalization of Parylene was achieved during a one-step chemical vapor deposition (CVD) polymerization process, forming NHS ester-functionalized Parylene, and subsequent RGD attachment was enabled via a conjugation reaction between the NHS ester and amine groups. The modification procedures additionally provided a clean and gentle approach to avoid thermal excursions, intense irradiation, chemicals, or solvents that might damage delicate structures or sensitive molecules on the devices. The modification layers exhibited excellent mechanical strength on the substrate, meeting the high standards of the American Society for Testing and Materials (ASTM), and the resultant cell adherence property was verified by a centrifugation assay and the analysis of attached cell morphologies; the results collectively demonstrated robust and sustainable modification layers of the NHS ester-functionalized Parylene and confirmed that the cell-adherence property imparted by using this facile modification technique was effective. The modification technology is expected to benefit the design of prospective interface properties for silicon-based devices and related industrial products.

Improved dose homogeneity using electronic compensation technique for total body irradiation.

In total body irradiation (TBI) utilizing large parallel-opposed fields, the manual placement of lead compensators has conventionally been used to compensate for the varying thickness throughout the body. The goal of this study is to pursue utilizing the modern electronic compensation (E-comp) technique to more accurately deliver dose to TBI patients. Bilateral parallel-opposed TBI treatment plans were created using E-comp for 15 patients for whom CT data had been previously acquired. A desirable fluence pattern was manually painted within each field to yield a uniform dose distribution. The conventional compensation technique was simulated within the treatment planning system (TPS) using a field-in-field (FIF) method. This allows for a meaningful evaluation of the E-comp technique in comparison to the conventional method. Dose-volume histograms (DVH) were computed for all treatment plans. The mean total body dose using E-comp deviates from the prescribed dose (4 Gy) by an average of 2.4%. The mean total body dose using the conventional compensation deviates from the prescribed dose by an average of 4.5%. In all cases, the mean body dose calculated using E-comp technique deviates less than 10% from that of conventional compensation. The average reduction in maximum dose using E-comp compared to that of the conventional method was 30.3% ± 6.6% (standard deviation). In all cases, the s-index for the E-comp technique was lower (10.5% ± 0.7%) than that of the conventional method (15.8% ± 4.4%), indicating a more homogenous dose distribution. In conclusion, a large reduction in maximum body dose can be seen using the proposed E-comp technique while still producing a mean body dose that accurately complies with the prescription dose. Dose homogeneity was quantified using s-index which demonstrated a reduction in hotspots with E-comp technique. Electronic compensation technique is capable of more accurately delivering a total body dose compared to conventional methods.