Modulation of electroosmotic flow in capillary electrophoresis by plant polyphenol-inspired gallic acid/polyethyleneimine coatings: Analysis of small molecules.

Plant polyphenols can form functional coatings on various materials through self-polymerization. In this paper, a series of modified capillary columns, which possess diversity of charge characteristics for modulating electroosmotic flow (EOF), were prepared by one-step co-deposition of gallic acid (GA), a plant-derived polyphenol monomer, and branched polyethyleneimine (PEI). The physicochemical properties of the prepared columns were characterized by Fourier transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy and scanning electron microscopy (SEM). The magnitude and direction of EOF of GA/PEI co-deposited columns were modulated by changing a series of coating parameters, such as post-incubation of FeCl3, co-deposition time, and deposited amounts of GA and PEI with different relative molecular mass (PEI-600, PEI-1800, PEI-10000, and PEI-70000). Furthermore, the separation efficiencies of the prepared GA/PEI co-deposited columns were evaluated by separations of small molecules, including organic acids, polar nucleotides, phenols, nucleic acid bases and nucleosides. Results indicated that modulating of EOF plays an important role in enhancing the separation performance and reversing the elution order of the analytes. Finally, the developed method was successfully applied to quantitative analysis of acidic compounds in four real samples. The recoveries were in the range of 73.5%-85.8% for citric acid, benzoic acid, sorbic acid, salicylic acid and ascorbic acid in beverage and fruit samples, 101.6%-104.9% for cinnamic acid, vanillic acid, and ferulic acid in Angelica sinensis sample, while 84.6%-97.8% for guanosine-5'-monophosphate, uridine-5'-monophosphate, cytosine-5'- monophosphate and adenosine-5'-monophosphate in Cordyceps samples. These results indicated that the co-deposition of plant polyphenol-inspired GA/PEI coatings can provide new opportunities for EOF modulation of capillary electrophoresis.

Metal organic framework HKUST-1 modified with carboxymethyl-ß-cyclodextrin for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs.

This work shows that the metal organic framework (MOF) HKUST-1 of type Cu3(BTC)2 (also referred to as MOF-199; a face-centered-cubic MOF containing nanochannels) is a most viable coating for use in enantioseparation in capillary electrochromatography (CEC). A HKUST-1 modified capillary was prepared and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, elemental analysis and thermogravimetric analysis. CEC-based enantioseparation of the basic drugs propranolol (PRO), esmolol (ESM), metoprolol (MET), amlodipine (AML) and sotalol (SOT) was performed by using carboxymethyl-ß-cyclodextrin as the chiral selector. Compared with a fused-silica capillary, the resolutions are improved (ESM: 1.79; MET: 1.80; PRO: 4.35; SOT: 1.91; AML: 2.65). The concentration of chiral selector, buffer pH value, applied voltage and buffer concentration were optimized, and the reproducibilities of the migration times and Rs values were evaluated. Graphical abstract Schematic presentation of the preparation of a HKUST-1@capillary for enantioseparation of racemic drugs. Cu(NO3)2 and 1,3,5-benzenetricarboxylic acid (BTC) were utilized to prepare the HKUST-1@capillary. Then the capillary was applied to construct capillary electrochromatography system with carboxymethyl-ß-cyclodextrin (CM-ß-CD) for separation of basic racemic drugs.

Admicelles in open-tube capillaries for chromatography and electrochromatography.

Surfactant bilayers or admicelles at the solid surface-liquid interface inside 50-200 µm inner diameter (i.d.) open-tube fused-silica capillaries were developed as 'soft' stationary pseudophases for the liquid chromatographic (LC) separations of neutral and charged analytes. Admicelles were formed in-situ from buffered aqueous mobile phases with cetytrimethylammonium bromide at concentrations between the critical surface aggregation concentration and critical micelle concentration, which were determined by electroosmotic flow measurements using capillary electrophoresis. There were no micelles in the mobile phase solution. Also, there was no solid phase that is classically required in LC. Pressure and voltage driven modes or open-tubular admicellar liquid chromatography (OT-AMLC) and electrochromatography, respectively were proposed based on the separation of neutral analytes. The parameters (i.e., pH, concentration of surfactant, salt, and methanol in the mobile phase and capillary i.d.) that affected the surprising chromatographic effect of admicelles at the interface were investigated. The analytical performance of OT-AMLC for small molecules were found acceptable. Applications to environmental water and biological (HepG cell line metabolism media) samples analysis with appropriate sample preparation procedures were also conducted. The use of pseudophases at the solid surface-liquid interface could be a viable solution to problems associated with the use of solid stationary or support materials in nano- and micro-liquid chromatography and electrochromatography.

Development of novel on-line capillary gas chromatography-based analysis method for volatile organic compounds produced by aerobic fermentation.

Many volatile compounds, such as isoprene, a precursor used in the synthesis of natural rubber, have been produced through fermentation using genetically engineered microorganisms. Despite this biotechnological success, measuring the concentrations of volatile compounds during fermentation is difficult because of their high volatility. In current systems, off-line analytical methods usually lead to product loss, whereas on-line methods raise the production cost due to the requirement of complex devices. Here, we developed a novel on-line gas chromatography (GC)-based system for analyzing the concentration of isoprene with the aim to minimize the cost and requirement for devices as compared to current strategies. In this system, a programmable logic controller is used to combine conventional GC with a syringe pump module (SPM) directly connected to the exhaust pipe of the fermentor, and isoprene-containing samples are continuously pumped from the SPM into the GC using an air cylinder recycle stream. We showed that this novel system enables isoprene analysis during fermentation with convenient equipment and without the requirement of an expensive desorption tube. Furthermore, this system may be extended to the detection of other volatile organic compounds in fermentation or chemical processes.

Highly uniform porous silica layer open-tubular capillary columns produced via in-situ biphasic sol-Gel processing for open-tubular capillary electrochromatography.

We report a highly uniform porous layer open tubular (PLOT) column for capillary electrochromatography (CEC) analysis. The PLOT column is easily fabricated using a single-step in-situ biphasic reaction, producing homogeneous porous-layer modified surface with ∼240 nm thickness in a 50 µm-id capillary. CEC performance of the PLOT column has been investigated and optimized under various experimental parameters. Using a mixture of naphthalene and biphenyl as the test sample, we show that the PLOT column exhibits good separation efficiency with resolution >3.0 and theoretical plate numbers over 6 × 104, as well as good intra-/inter-day repeatability and column-to-column repeatability. The column has been successfully applied for CEC analysis of three different types of samples without any further modification of the columns, including complicated peptide products from tryptic-digestion of proteins (lysozyme and BSA), ß-blockers (basic samples) and polycyclic aromatic hydrocarbons (neutral samples). Efficient separation has been achieved, which could be attributed to the enhanced surface-to-volume ratio of the PLOT column that will increase the interaction between solid phase and mobile phase in CEC. In addition, base-line separation of neutral samples indicates the reversed phase chromatographic property of the PLOT column, which could be induced by the residue of hexadecyltrimethylammonium bromide used in the fabrication process. Our study show that the present PLOT column is a promising approach that can significantly enhance CEC separation efficiency and could be of potential value in analysis of various different samples.

Rapid fabrication of ionic liquid-functionalized monolithic column via in-situ urea-formaldehyde polycondensation for pressurized capillary electrochromatography.

A novel strategy for rapidly fabricating ionic liquid (IL)-bonded multifunctional monolithic stationary phase has been developed by an in-situ polycondensation of urea-formaldehyde (UF) and a lab-made acylamino-functionalized IL (1-acetylamino-propyl-3-methylimidazolium bromide, [AAPMIm]Br). Two polycondensation processes of UF with 1-amino-propyl-3-methylimidazolium bromide or [AAPMIm]Br were evaluated. Several parameters including mass ratio of urea-formaldehyde, amount of [AAPMIm]Br, polycondensation time and reaction temperature were optimized, and the [AAPMIm]Br-bonded monolithic stationary phase could be rapidly synthesized in 10min with a satisfactory permeability and mechanical stability. Used for pressurized capillary electrochromatography (pCEC), a typical hydrophilic interaction (HI) retention could be obtained in the resultant [AAPMIm]Br-bonded monolith when the content of acetonitrile (ACN) in mobile phase exceeded 20%. Multiple retention mechanisms such as hydrophilic interaction (HI), hydrogen bond (HH), anion-exchange and cation-exclude interactions, were acheived in the [AAPMIm]Br-bonded monolith. Various polar compounds including phenols, benzoic acid and its homologues, and enkephalins have been well separated and thus demonstrated a satisfactory separation performance of the obtained monolith. A facile access is lighted for rapid preparation of ionic liquid-bonded monoliths with multiple retention mechanisms for pCEC.

Silica-based polypeptide-monolithic stationary phase for hydrophilic chromatography and chiral separation.

Glutathione (GSH)-, somatostatin acetate (ST)- and ovomucoid (OV)-functionalized silica-monolithic stationary phases were designed and synthesized for HILIC and chiral separation using capillary electrochromatography (CEC). GSH, ST and OV were covalently incorporated into the silica skeleton via the epoxy ring-opening reaction between their amino groups and the glycidyl moiety in γ-glycidoxypropyltrimethoxysilane (GPTMS) together with polycondensation and copolymerization of tetramethyloxysilane and GPTMS. Not only could the direction and electroosmotic flow magnitude on the prepared GSH-, ST- and OV-silica hybrid monolithic stationary phases be controlled by the pH of the mobile phase, but also a typical HILIC behavior was observed so that the nucleotides and HPLC peptide standard mixture could be baseline separated using an aqueous mobile phase without any acetonitrile during CEC. Moreover, the prepared monolithic columns had a chiral separation ability to separate dl-amino acids. The OV-silica hybrid monolithic column was most effective in chiral separation and could separate dl-glutamic acid (Glu) (the resolution R=1.07), dl-tyrosine (Tyr) (1.57) and dl-histidine (His) (1.06). Importantly, the chiral separation ability of the GSH-silica hybrid monolithic column could be remarkably enhanced when using gold nanoparticles (AuNPs) to fabricate an AuNP-mediated GSH-AuNP-GSH-silica hybrid monolithic column. The R of dl-Glu, dl-Tyr and dl-His reached 1.19, 1.60 and 2.03. This monolithic column was thus applied to separate drug enantiomers, and quantitative separation of all four R/S drug enantiomers were achieved with R ranging from 4.36 to 5.64. These peptide- and protein-silica monolithic stationary phases with typical HILIC separation behavior and chiral separation ability implied their promise for the analysis of not only the future metabolic studies, but also drug enantiomers recognition.

Evaluation of affinity interaction between small molecules and platelets by open tubular affinity capillary electrochromatography.

In this paper, an open tubular affinity capillary electrochromatography (OT-ACEC) was developed by physical adsorption of rabbit platelets on the inner surface of capillary. The interactions between small molecules include adenosine diphosphate (ADP) (positive control), protocatechuic acid (negative control) and seven natural products (salvianolic acid B, salvianic acid A sodium, hydroxysafflor yellow A, ferulic acid, chlorogenic acid, sinapic acid, caffeic acid) and platelets were evaluated by their retention factors and binding constants obtained based on peak-shift assay. Then, the activities of anti-platelet aggregation induced by thrombin (THR), ADP and arachidonic acid (AA) for those small molecules (except ADP) were evaluated by turbidimetric method. The results indicate that: (i) ADP, a platelet aggregation inducer, had strong interaction with platelet, while protocatechuic acid that had no inhibition on platelet aggregation behaved no specific interaction; (ii) there was a positive correlation between the anti-platelet aggregation activities of small molecules and their interactions with platelet, generally those compounds with higher binding constants with platelet exhibited higher activities. Therefore, the OT-ACEC method developed in the present study can be a potential method to evaluate affinity interactions between small molecules and platelets, so as to predict the biological activities such as anti-platelet aggregation for the small molecules.

[A novel multiple-channel apparatus for packing capillary chromatographic column and its application].

A novel multiple-channel apparatus for packing capillary chromatographic column was designed and manufactured for packing six capillary chromatographic columns with close column efficiency at the same time. Briefly, it consists of a magnetic stirrer, a liquid chromatographic pump and a multiple-channel can. The reagents used for preparing ODS (C18) slurry and stirring condition of the magnetic stirrer were optimized in the study. Two batches of capillary chromatographic columns were packed under the optimum condition, and these packed capillary chromatographic columns were evaluated in the terms of peak capacity, sequence coverage, retention times of three peptide ions and column pressure using the tryptic digest of a bovine serum albumin (BSA) and detected by LC-MS in electrospray ionization (ESI) mode. The experimental results showed that the six capillary chromatographic columns packed at the same time had close column efficiencies, however, the column efficiencies of twelve capillary chromatographic columns packed at two times were significantly different. In addition, there was no significant column efficiency difference when packing one or six capillary chromatographic columns at the same time. The multiple-channel apparatus designed by us is simple, time-saving, and can be applied to pack capillary chromatographic columns with similar column efficiencies, thus it is of evident advantage over traditional one-channel apparatus.

Polymer monolithic capillary column fabricated by using monodisperse iron oxide nanocrystal template to enhance the electrochromatographic separation of small molecules.

Monodisperse iron oxide nanocrystals and organic solvents were utilized as coporogens in monolithic poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) capillary columns to afford stationary phases with enhanced electrochromatographic performance of small molecules. While the conventional monoliths using organic solvents only as a porogen exhibited poor resolution (Rs) <1.0 and low efficiency of 40 000-60 000 plates/m, addition of a small amount of nanocrystals to the polymerization mixture provided increased resolution (Rs > 3.0) and high efficiency ranged from 60 000 to 100 000 plates/m at the same linear velocity of 0.856 mm/s. It was considered that the mesopores introduced by the nanocrystals played an important role in the improvement of the monolith performance. This new strategy expanded the application range of the hydrophobic monoliths in the separation of polar alkaloids and narcotics. The successful applications demonstrated that the glycidyl methacrylate based monoliths prepared by using nanocrystal template are a good alternative for enhanced separation efficiency of small molecules.

Applications of monolithic materials for sample preparation.

Recent advances in monolithic columns have made them an alternative to traditional packed columns used in liquid chromatography as well as capillary electrochromatography (CEC). The monolithic columns have been extensively studied and shown to possess several advantages that make them a promising and potential substitute for the particle packed columns. A large number of papers relating to monolithic columns have been published every year, focusing on different preparation techniques, characteristic evaluations as well as applications. This review highlighted the latest development of monoliths for other modes of analytical chemistry. In particular, this review will highlight the application of monoliths for sample preparation which is an important step of the entire analysis.

Toward rapid preparation of capillary columns for electrochromatography use.

CEC is a high performance electrodriving liquid phase separation technique. It does not need complex and sophisticated high pressure instrumentation for nanoflow driving. This is attractive for parallel multicolumn analysis. To this end, high throughput methods for column preparation are needed to support the use of multiple columns. In this study, we directly used CEC mobile phase solution as the packing solvent, and realized rapid preparation of capillary columns based on a single particle fritting technology. The method presented high preparation throughput compared with other reported methods based on various fritting technologies. The single particle fritting approach promoted column preparation throughput to 1 column/h, including all the fritting, packing and conditioning steps. The rapidly prepared columns showed consistently high efficiency of up to 150 000 plates per meter, and usefulness in reversed phase CEC of neutral, charged and biomolecules. With standard peptides as the sample, excellent long term reproducibility (better than 0.8%RSD, ten days, for retention times) was observed.

Enantiomeric separation of amlodipine and its two chiral impurities by nano-liquid chromatography and capillary electrochromatography using a chiral stationary phase based on cellulose tris(4-chloro-3-methylphenylcarbamate).

In this work, a novel polysaccharide-based chiral stationary phase, cellulose tris(4-chloro-3-methylphenylcarbamate), also called Sepapak 4 has been evaluated for the chiral separation of amlodipine (AML) and its two impurities. AML is a powerful vasodilatator drug used for the treatment of hypertension. Capillary columns of 100 µm id packed with the chiral stationary phase were used for both nano-LC and CEC experiments. The optimization of the mobile phase composed of ACN/water, (90:10, v/v) containing 15 mM ammonium borate pH 10.0 in nano-LC allowed the chiral separation of AML and the two impurities, but not in a single run. With the purpose to obtain the separation of the three pairs of enantiomers simultaneously, CEC analyses were performed in the same conditions achieving better enantioresolution and higher separation efficiencies for each compound. To fully resolve the mixture of six enantiomers, parameters such as buffer pH and concentration sample injection have been then investigated. A mixture of ACN/water (90:10, v/v) containing 5 mM ammonium borate buffer pH 9.0 enabled the complete separation of the three couples of enantiomers in less than 30 min. The optimized CEC method was therefore validated and applied to the analysis of pharmaceutical formulation declared to contain only AML racemate.

One-pot synthesis of N-methylimidazolium-based porous polymer monolith for capillary electrochromatography via free radical copolymerization and quaterisation.

One-pot synthesis of porous polymer monolith decorated with N-methylimidazolium in a capillary was described. The polymer matrix was synthesized by in situ copolymerization and quaterization of 3-chloro-2-hydroxylpropyl methacrylate (CHPMA), ethylene dimethacrylate (EDMA), and N-methylimidazole (N-MIz). The influencing factors including amount of cross-linkers, composition of porogenic solvents, and polymerization temperature on the formation of the monolithic column were investigated. The monolithic column exhibited high column efficiency for thiourea, up to 135 000 plates per meter, and phenylmethanol, up to 102 000 plates per meter. Different types of compounds including alkylbenzenes, phenols, and inorganic anions were successfully baseline separated by capillary electrochromatography (CEC). The separation of theses analytes on the column indicated typical reversed-phase and anion-exchange chromatographic retention mechanism.

Open-tubular capillary electrochromatography with bare gold nanoparticles-based stationary phase applied to separation of trypsin digested native and glycated proteins.

In this work, open-tubular capillary electrochromatography (OT-CEC) method with bare gold nanoparticles (GNPs)-based stationary phase has been developed and applied for separation of tryptic peptide fragments of native and glycated proteins, bovine serum albumin (BSA), and human transferrin (HTF). The GNPs-based stationary phase was prepared by immobilization of bare GNPs, freshly reduced from tetrachloroaurate(III) ions by citrate reduction, on the sol-gel pretreated inner wall of the fused silica capillary. The separation efficiency, peak capacity, and peptide recovery of this open-tubular capillary column were investigated by varying the experimental parameters such as type and concentration of the buffering constituent and pH of the background electrolyte (BGE), temperature, and separation voltage. The best separations of the above tryptic peptides were achieved in the BGE composed of aqueous 100 mmol/L sodium phosphate buffer, pH 2.5, at separation voltage 10 kV per 47-cm long, 50 µm inside diameter capillary thermostated at 25°C. OT-CEC with bare GNPs stationary phase is shown to be a suitable technique for separation of complex peptide mixtures arising from tryptic digestion of native and glycated BSA and HTF, and for investigation of glycation (nonenzymatic glycosylation) of these proteins.

Gold nanoparticle-coated capillaries for protein and peptide analysis on open-tubular capillary electrochromatography.

We report a new method of immobilization of gold nanoparticles (AuNPs) on a fused-silica capillary through covalent binding. The resulting modified capillary was applied to electrophoretic systems to improve the efficiency of separation and the selectivity of selected solutes. The immobilization of AuNPs on the capillary wall was performed in a very simple and fast way without requiring heating. The surface features of an AuNP-coated capillary column were determined using the scanning electron microscopy. The chromatographic properties of AuNP-coated capillaries were investigated through variation of the buffer pH and separation voltage. Effective separations of synthetic peptides mixture were obtained on the AuNP-coated capillaries. The method shows a remarkable stability since it was reused about 900 times. The capacity factor was duplicated. Therefore, this modification is stable and can be applied to different separation purposes. A complex mixture of tryptic peptide fragments of HSA was analyzed in both the bare- and the AuNP-coated capillaries. Better electrophoretic peptide profile was observed when using the AuNP-coated capillary.

Application of bare gold nanoparticles in open-tubular CEC separations of polyaromatic hydrocarbons and peptides.

In this study, bare gold nanoparticles (GNPs) immobilized in the sol-gel-pretreated fused-silica (FS) capillary as a stationary phase for open-tubular capillary electrochromatography (OT-CEC) are for the first time shown to be able to separate both hydrophobic polyaromatic hydrocarbons (PAHs) as well as hydrophilic cationic antimicrobial peptides. Model mixture of four PAHs, naphthalene, fluorene, phenanthrene, and anthracene, was resolved by OT-CEC in the GNP-modified FS capillaries using the hydro-organic background electrolyte (BGE) composed of 20 mmol/L sodium phosphate buffer, pH 7, modified with ACN at 8:2 v/v ratio. On the other hand, three synthetic analogues of an antimicrobial peptide mastoparan PDD-B, basic tetradecapeptides INWKKLGKKILGAL-NH(2), INSLKLGKKILGAL-NH(2) and NWLRLGRRILGAL-NH(2), were separated in aqueous acidic BGEs, pH 2.1-3.1, composed of weak acids (formic and acetic) or amphoteric amino or imino acids (aspartic or iminodiacetic), utilizing the advantage of a slow reversed (anodic) EOF and slightly positive charge of the GNP-modified FS capillary suppressing the adsorption of cationic peptides on the inner capillary wall and improving their resolution.

Branched polyethyleneimine-bonded tentacle-type polymer stationary phase for peptides and proteins separations by open-tubular capillary electrochromatography.

A novel tentacle-type polymer stationary phase covalently modified with branched polyethyleneimine (PEI) was developed for peptides and proteins separations by open-tubular CEC (OT-CEC). The preparation procedure included the silanization of capillary inner wall, in situ graft polymerization and PEI functionalization. A wrinkly polymer surface of multitudinous steric amine groups was evenly formed on the capillary inner wall, and anodic EOF could be gained within a wide pH range of 2.5-7.5. The electroosmotic mobility was examined for its dependence on pH as well as PEI concentrations. Good repeatability was gained with RSD for the migration time of EOF marker within 4.8% and satisfactory chemical stability was validated. Due to the existence of amine groups on the surface of tentacle-type polymer stationary phase, the silanol effect that occurs between the positively charged biomolecules and the silanols of the capillary column was greatly suppressed. Compared with a monolayer-coating capillary, seven enkephalin-related peptides were well resolved on the PEI-bonded column with high efficiencies. Favorable separations of peptides and proteins with high column efficiencies were obtained in 144,000-189,000 and 97,000-170,000 plates/m. Branched PEI-bonded tentacle-type polymer stationary phase has been proven to afford satisfactory retention and resolution of peptides and proteins.

Monolithic poly(butyl methacrylate-ethylene dimethacrylate-methacrylic acid) column for capillary electrochromatography.

A butyl methacrylate-ethylene dimethacrylate-methacrylic acid (MAA) monolithic column was prepared for capillary electrochromatography. The effect of MAA weight percentage on the EOF mobility and column efficiency was studied. BMA-EDMA-MAA monolith with higher content of MAA provided higher EOF mobility as well as higher efficiency. The effect of mobile-phase composition and buffer pH was also investigated. The monolithic columns exhibited a good repeatability and reproducibility of column preparation with relative standard deviation values below 16% in the studied chromatographic parameters.

Novel highly hydrophilic methacrylate-based monolithic column with mixed-mode of hydrophilic and strong cation-exchange interactions for pressurized capillary electrochromatography.

A novel highly hydrophilic polymethacrylate-based monolithic stationary phase based on the copolymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) and pentaerythritol triacrylate (PETA) was designed for pressurized capillary electrochromatography. A typical hydrophilic interaction chromatography mechanism could be observed when the content of acetonitrile (ACN) in the mobile phase exceeded 25%. Slight swelling or shrinking with mobile phases of different polarity was observed in permeability studies. Good retentions and efficient separations of polar analytes, such as neutral amides and phenols, were well achieved in hydrophilic interaction chromatography mode with only about 50% ACN content in the mobile phase. It was remarkably lower than the content of ACN (>90%) used on the hydrophilic polymethacrylate-based monoliths reported previously. Additionally, a mixed mode of hydrophilic interaction (HI) and strong cation-exchange (SCX) could be also obtained in the analysis of charged peptides, and high column efficiency up to 80,000 plates/m was achieved without peak tailing. The prepared hydrophilic stationary phase might provide a potential environmental friendly separation media for polar solutes as it consumes a low volume of organic solvents.