Embalagem para o leite humano ordenhado / Envase para la leche humana extraída / Packaging for expressed human milk

Esta Norma Técnica tem por objetivo estabelecer o padrão de embalagem a ser utilizada no acondicionamento do leite humano ordenhado, visando a garantia da qualidade em Bancos de Leite Humano e sua certificação.

Esta Norma Técnica tiene como objetivo establecer el estándar de envase a utilizar en el acondicionamiento de la leche humana extraída, con el fin de garantizar la calidad en los Bancos de Leche Humana y su certificación.

Verificação da embalagem para o leite humano ordenhado cru / Packaging verification for raw expressed human milk

Esta Norma Técnica tem por objetivo estabelecer os critérios para verificação de da embalagem de acondicionamento do leite humano ordenhado cru, visando a garantia da qualidade em Bancos de Leite Humano e sua certificação.

Seleção e classificação leite humano ordenhado cru / Selection and classification raw expressed human milk

Esta Norma Técnica tem por objetivo estabelecer os critérios necessários para seleção e classificação do leite humano ordenhado cru, visando a garantia da qualidade em Bancos de Leite Humano e sua certificação.

Improvement of starch films for food packaging through a three-principle approach: Antioxidants, cross-linking and reinforcement.

This study uses sunflower hulls, a by-product from the sunflower snack industry, to recover both, valuable phenolic compounds and cellulose fibers, for the production of antioxidant reinforced starch films as potential food packaging material. The phenolic extract provided antioxidant properties to the films with EC50 values of 89 mg film/mg DPPH. The cellulose fibers reinforced the starch films with a threefold increase in Young´s modulus. Furthermore, citric acid was added to induce cross-linking of the starch polymers and improve film integrity. The addition of citric acid induced both, starch polymer hydrolysis and cross-linking, seen in a shift in chain-length distribution after debranching with iso-amylase. This is the first study that focuses on a three-principle approach to improve edible starch films, and follows UN goals on sustainability to reduce waste and increase value in by-products as a step forward to functionalize packaging material.

Investigation of the structural, physical properties, antioxidant, and antimicrobial activity of chitosan- nano-silicon aerogel composite edible films incorporated with okara powder.

The chitosan/okra powder/nano-silicon aerogel composite films were prepared by casting method and their physicochemical properties and structural characterization were studied. The results showed that the composite film had good mechanical properties, barrier properties and optical properties. The composite film has strong flexibility. The surface glossiness of C/D/S1.5:1:0.1 film was 14.4Gu. As for the antibacterial activity, all the composite films had strong antibacterial activity against Gram-negative (E. coli) and Gram-positive (S. aureus), and the inhibition zone of C/D/S1.5:1:0.10 against E. coli reached 551.96 mm2, the inhibition zone for S. aureus was 350.29 mm2. The composite film had uniform, non-porous, continuous and dense surface characteristics. The structural characterization confirmed that there was good compatibility between chitosan, okara powder and nano-silicon aerogel. In summary, the composite films had excellent performance and structure, which promoted the research of functional packaging films.

Evaluation of the Synergistic Antioxidant Effect of Resveratrol and Zataria multiflora Boiss Essential Oil in Sodium Alginate Bioactive Films.

BACKGROUND: Biodegradable films are appropriate alternatives to synthetic polymers due to their potential to enhance food safety and their function as a carrier for wide a range of food additives especially natural antioxidants. OBJECTIVE: The aim of this study was to compare the potential antioxidant activities of sodium alginate films containing resveratrol (RES) alone and in combination with Zataria multiflora essential oil (ZEO) using an in vitro model. METHODS: At first, the major chemical compositions of ZEO were evaluated by GC/MS. Then, the amount of phenolic compounds of sodium alginate films were evaluated by total phenolic contents assay and antioxidant activities of films were evaluated by 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays. Finally, the concentrations of ZEO and RES which showed better antioxidant activities in sodium alginate films were incorporated to films in combination forms to evaluate their synergistic effects. RESULTS: According to gas chromatography-mass spectrometry (GC/MS) analysis, 35 compounds of ZEO were identified and Thymol (37.94%), p-Cymene (9.50%) and 3-Carene (4.98%) were the most important compounds of essential oil, respectively. The results of the radical scavenging evaluations, showed better antioxidant activities of the films containing RES than the films containing ZEO and Butylated hydroxytoluene (BHT). Also, the combined uses of ZEO and RES into alginate films had the synergistic effects (P<0.05). CONCLUSION: Therefore, it can be concluded that alginate films incorporated with the combination of ZEO and RES is the appropriate option to postpone the oxidative reactions and can be used as natural antioxidant in the food packaging industry.

Chitosan and Oregano Oil Treatments, Individually or in Combination, Used To Increase the Shelf Life of Vacuum-Packaged, Refrigerated European Eel (Anguilla anguilla) Fillets.

We investigated the impact of chitosan and oregano essential oil (EO) individually or in combination on the quality of eel fillets in vacuum packaging (VP) and stored under refrigeration (4°C). Treatments studied were (i) control eel fillets stored in VP (E), (ii) eel fillets treated with 0.3% (v/w) oregano EO and stored in VP (E-OR), (iii) eel fillets treated with 2.0% (w/v) chitosan and stored in VP (E-CH), and (iv) eel fillets treated with 2.0% (w/v) chitosan and 0.3% (v/w) oregano EO and stored in VP (E-CH-OR). Treatments E-CH-OR and E-CH significantly reduced counts of mesophilic bacteria, Pseudomonas, Shewanella, and yeasts and molds during storage. Use of chitosan alone or in combination with oregano EO led to a significant reduction in concentrations of trimethylamine nitrogen and total volatile basic nitrogen in fillets, which led to lower concentrations of thiobarbituric acid reactive substances compared with the control samples. The eel samples in the E-CH and E-CH-OR groups were sensorially acceptable during the entire refrigerated storage period of 18 days. Presence of chitosan in the E-CH and E-CH-OR fillets did not negatively affect the taste of the fillets. E-CH fillets received a higher taste score than did E-CH-OR fillets probably because of the distinct and "spicy" lemon taste of chitosan, which was well received by the sensory panel. Based on overall sensory data (based on mean sensory scores of odor and taste), the shelf life was 6 days for the control fillets, 10 days for the E-OR fillets, and >18 days for the E-CH and E-CH-OR fillets stored in VP at 4°C. Overall, chitosan-treated eel fillets had lower microbial loads and a longer shelf life compared with the controls. Chitosan-treated eel fillets were preferred over oregano-treated fillets. Chitosan alone or in combination with oregano could be used as a preservative treatment and shelf-life extender for other seafoods.

Determination of adhesive acrylates in recycled polyethylene terephthalate by fabric phase sorptive extraction coupled to ultra performance liquid chromatography - mass spectrometry.

This article presents fabric phase sorptive extraction (FPSE) as a simple and effective pre-concentration method for the enrichment of acrylate compounds in different food simulants and subsequent analysis of the extracts by ultra-high-performance liquid chromatography with mass spectrometric detection (UPLC-MS). Acrylate compounds come from acrylic adhesives used commonly for sticking the paper labels on polyethylene terephthalate (PET) bottles and therefore, they may exist in recycled polyethylene terephthalate (rPET). Four acrylates were studied: ethylene glycol dimethacrylate (EGDM), pentaerythritol triacrylate (PETA), triethylene glycol diacrylate (TEGDA) and trimethylolpropane triacrylate (TMPTA). Five different types of FPSE media coated with different sol-gel sorbents were studied and finally sol-gel polyethylene glycol- polypropylene glycol-polyethylene glycol triblock copolymer (PEG-PPG-PEG) coated FPSE media was chosen for its satisfactory results. The optimal conditions affecting the extraction efficiency of compounds were determined in three different food simulants. Statistical evaluation of this method reveals good linearity and precision. Under the optimized conditions, the method provided limits of detection of the compounds in the range of (0.1-1.9 ng g-1, 0.1-1.2 ng g-1, 0.2-2.3 ng g-1) in EtOH 10%, HAc 3% and EtOH 20% and the enrichment factor values (EFs) after applying N2 were in the range of 11.1-25.0, 13.8-26.3, 8.3-21.9, in simulants A, B and C respectively. The optimized method was applied successfully to analyze thirteen types of recycled PET samples. Acrylates were found in some of the samples at ng g-1 levels.

Toward the characterisation of non-intentionally added substances migrating from polyester-polyurethane lacquers by comprehensive gas chromatography-mass spectrometry technologies.

Polyester-polyurethane lacquer, used to cover the inner surface of metallic food contact materials, may transfer non-intentionally added substances (NIAS) to the food. The identification of such a diversity of compounds, considered as migrating substances, requires taking advantage of complementary analytical platforms. Therefore, four types of gas chromatography-mass spectrometry (GCMS) couplings were investigated and compared for their abilities to identify migrating substances after acetonitrile extraction of two commercialised lacquers. In parallel, various ionisation sources, i.e. electron ionisation (EI) (70 eV and soft energies) and atmospheric-pressure chemical ionisation (APCI) as well as various mass analysers, i.e. quadrupole, time-of-flight (low and high resolution) and Orbitrap, were tested. Comparison of mass spectra with a commercial library for EI ionisation source led to the identification of two NIAS compounds, isophorone diisocyanate and 4,4'-diphenylmethane diisocyanate. Additionally, many cyclic oligoesters (four monomer units) were unambiguously identified according to supplier's declaration on starting materials used, primarily based on the molecular ion observed by APCI mode and characteristic fragment ions. High resolution mass analysers also enhanced confidence level in such NIAS identification. One- and two-dimensional GC were also investigated for separation assessment. Although GC × GC did not reveal additional NIAS, its use provided a valuable mapping of oligomers according to monomers composition. These results were compared to our previously published LC-MS study, carried out on the same lacquer samples. This study shows that LC and GC, along with their related ionisation techniques and their own selectivity, are complementary approaches, revealing different classes of compounds covering a wide range of volatility and polarity.

Effects of Package Atmosphere and Storage Conditions on Minimizing Risk of Escherichia coli O157:H7 in Packaged Fresh Baby Spinach.

Packaged fresh spinach has been associated with outbreaks of illness caused by Escherichia coli O157:H7. The purpose of this study was to assess the behavior of E. coli O157:H7 in packaged baby spinach in response to storage conditions of temperature and package atmosphere and including effects of inoculation level, spinach leaf damage (cut leaves), internalized or leaf surface contamination, exposure to hypochlorite sanitizer, and package size. Behavior of E. coli O157:H7 inoculated at 2 and 4 log CFU/g on spinach packaged in polymer bags composed of a two-layer laminate (polypropylene and polyethylene) and stored under atmospheres of 20% O2-3% CO2 and 0% O2-15% CO2 (aerobic and anaerobic, respectively) was assessed at 5, 7, 12, and 15°C for up to 14 days. Growth kinetics were calculated using DMFit software. Temperature decreases progressively diminished growth or survival of the pathogen, and an aerobic package atmosphere resulted in longer lag times (4 to 6 days) and lower population levels (0.2 to 1.4 log CFU/g) compared with the anaerobic atmosphere at 15°C. Internalized contamination, leaf cuts, or exposure to 100 ppm of hypochlorite did not result in changes in pathogen behavior compared with controls; however, a growth minimization trend consisting of longer lag times and lower population levels was repeatedly observed in the aerobic compared with the anaerobic package atmospheres. In contrast, growth of indigenous mesophiles and Enterobacteriaceae was unaffected by package atmosphere. Spinach stored at 5 to 7°C in two sizes (5 and 16 oz) of polyethylene terephthalate clamshell packages with ambient air atmospheres was more likely to progress to lower-oxygen conditions in 16-oz compared with 5-oz packages after 7 days of storage (P < 0.05). Practices to maintain aerobic conditions within the package, as well as storage of the package at low temperature, are ways to limit growth of E. coli O157:H7 in packaged spinach.

Screening for mineral oil saturated and aromatic hydrocarbons in paper and cardboard directly by planar solid phase extraction and by its coupling to gas chromatography.

Mineral oil saturated and aromatic hydrocarbons (MOSH/MOAH) are food contaminants, mainly due migration from packaging materials made from recycled fibers, but other routes of entry into food have also been identified. Legal limits for MOSH and MOAH in food and food contact materials currently are not set, but are to be expected in the near future. For the analysis of MOSH and MOAH, the very well developed and highly automated on-line liquid chromatography-gas chromatography with flame ionization detection (LC-GC-FID) is commonly used. However, this approach is time-consuming, and data interpretation is a very challenging task. Therefore, a planar solid phase extraction (pSPE) method was developed for a rapid and efficient MOSH and MOAH screening in paper and cardboard. Based on high-performance thin-layer chromatography (HPTLC), pSPE offers the simultaneous clean-up and analysis of up to 20 samples in parallel, while MOSH and MOAH analytes were focused in two distinct target zones on silica gel HPTLC plates after a twofold development. Plate impregnation with primuline allowed the detection of MOSH by fluorescence, while MOAH were detected by UV light absorption. The pSPE screening approach provided limits of detection of 7.2 and 2.3 ng/zone for MOSH and MOAH, respectively, corresponding to 1.8 and 0.6 mg/kg paper. Coupling of pSPE with GC revealed the common MOSH and MOAH peak humps, while marker substances offered the identification of the mineral oil origin or information about recycled fiber materials. As compared to SPE-GC-FID analyses, the determined quantities of MOSH and MOAH in cardboard samples indicated pSPE as a rapid and suitable screening tool. The co-migration of polyolefin oligomeric saturated hydrocarbons, native n-alkanes, terpenes and possibly essential oils or sterol esters, however, can result in an overestimation of MOSH and MOAH. Hence, samples with pSPE results above a given limit are subsequently analyzed by GC (pSPE-GC) for confirmation and detailed evaluation.

Tackling the Relevance of Packaging in Life Cycle Assessment of Virgin Olive Oil and the Environmental Consequences of Regulation.

Production and consumption of olive oil is very important in Europe, being this product a basic element in the Mediterranean diet since long ago. The project objective is two-fold: a study of the contribution of virgin olive oils (VOOs) usual packaging to the whole life cycle of the product and a study of the environmental consequences of the Spanish Government regulation on VOO packaging. A life cycle assessment (LCA) according to ISO 14044 has been performed using the CML methodology for the impact assessment. The results show that the packaging influence varies from 2 to 300%, depending on the impact category and type of packaging (glass, tin or polyethylene terephtalate). Glass, which is related to higher quality perception by consumers, was found to be the most influencing material (due to its weight); however, this impact may be fairly reduced by applying ecodesign strategies (such as weight reduction and recycled-glass percentage increase). A new Spanish regulation on the mandatory use of non-refillable oilers in HORECA establishments (hotels, restaurants and caterings) aims to provide more quality assurance and better information to consumers; however, it was also found to mean a 74% increase in greenhouse gases emissions. This regulation was deeply discussed at European level and its application was withdraw due to consumers rejection, except for Spain. The findings of the present case study show that LCA and ecodesign should be important tools to be promoted and applied in policy making to reduce non-desirable consequences of regulation.

Method development for determination of migrated phthalate acid esters from polyethylene terephthalate (PET) packaging into traditional Iranian drinking beverage (Doogh) samples: a novel approach of MSPE-GC/MS technique.

In the current study, a novel magnetic solid phase extraction (MSPE) technique combined with a gas chromatography/mass spectroscopy (GC/MS) was developed to determine the phthalate ester content of bottled Doogh samples. Doogh is a yogurt-based drinking beverage, which is frequently consumed in Middle East and Balkans. It is produced by stirring yogurt in Chern separation machine and consists of substances such as water, yogurt, and salt in addition to aqueous extracts of native herbs. The magnetic multi-walled carbon nanotubes (MWCNT-Fe3O4) were used as adsorbents of phthalate acid esters (PAEs) due to a superior adsorption capability of hydrophobic compounds. In this context, the quantity of the extractable migrated phthalate esters (dibutyl phthalate (DBP), dimethyl phthalate (DMP), butyl benzyl phthalate (BBP), diethyl phthalate (DEP), di-N-octyl phthalate (DNOP), and bis (2-ethylhexyl) phthalate (DEHP)) from polyethylene terephthalate (PET) bottles into Doogh samples was measured. The correlation between the concentration of migrated PAEs and some factors such as the type of Doogh (gaseous and without gas), difference in brand (five brands), volume (1500 and 300 mL), and the storage time also was investigated. The migration level into Doogh samples was increased by incorporating of gas as well as increasing the volume of PET bottles. Also, with elaborating of storage time, the migration of some phthalates such as DEHP (the mean from 2419.85 ng L-1 in the first week to 2716.15 ng L-1 in the second month), DEP, and total phthalate was increased. However, no significant difference in concentrations of migrated phthalate esters among different examined brands was noted. Finally, the concentration of migrated PAEs from bottle into all the examined Doogh samples was below the defined standards by EPA; 6 µg/L for DEHP in drinking water. Graphical abstract ᅟ.

Active nanocomposite films based on soy proteins-montmorillonite- clove essential oil for the preservation of refrigerated bluefin tuna (Thunnus thynnus) fillets.

This manuscript evaluates the potential application of active nanocomposite films based on soy protein isolate (SPI)-montmorillonite (MMT)-clove essential oil (CEO) to the preservation of muscle fillets of bluefin tuna (Thunnus thynnus) during refrigerated storage, and furthermore analyzes whether the clay diffuses from the package to food. SPI films with: CEO (SPI-CEO), MMT (SPI-MMT), or both CEO and MMT (SPI-MMT-CEO), were prepared and used to cover tuna fillets during 17days of storage at 2°C. Polyethylene films were also used as control. Protein films nanoreinforced with 10g MMT/100g SPI and activated with CEO were able to decrease microbial growth (evaluated by TVBN and microorganism counts) and lipid autooxidation (evaluated according to the TBA index, FTIR and color parameters) of tuna fillets during the storage period studied. The presence of clay seemed to favor the release of the active principles of clove oil by prolonging its antimicrobial (especially effective to inhibit Pseudomonas spp.) and antioxidant activity over time without observing the diffusion of the clay's own metals (Si and Al) from the nanocomposite materials to the muscle of fish. These results are encouraging for the use of nanocomposite films in food packaging.

Migration of epoxidized soybean oil from polyvinyl chloride/polyvinylidene chloride food packaging wraps into food simulants.

Epoxidized soybean oil (ESBO) has been used in polyvinyl chloride (PVC)/polyvinylidene chloride (PVDC) food packaging cling film as a plasticizer and stabilizer. The aim of this study was to investigate the migration of ESBO from PVC/PVDC cling film, based on gas chromatography mass spectrometry (GC-MS). The specific migration of ESBO was evaluated using various food simulants (water, 4% acetic acid, 50% ethanol and n-heptane) for PVC and PVDC wrap products. ESBO did not migrate into water and 4% acetic acid for all the tested samples. However, it was released into 50% ethanol and n-heptane in several PVC/PVDC wraps, with maximum migration levels of 38.4 ± 0.7 and 37.4 ± 0.8 µg/mL, respectively. These results demonstrate that ESBO is capable of being released from PVC/PVDC wrap into amphiphilic/oily food and its migration should be regularly monitored.

New product trial, use of edibles, and unexpected highs among marijuana and hashish users in Colorado.

OBJECTIVE: This study examines the relationships between trial of new marijuana or hashish products and unexpected highs, and use of edible products and unexpected highs. METHODS: We conducted an online survey of 634 adult, past-year marijuana users in Colorado. We used logistic regression models to examine the relationship between new product trial or edible use and unexpected highs. RESULTS: In the first year that recreational marijuana was legal in Colorado, 71.4% of respondents tried a new marijuana or hashish product, and 53.6% used an edible product. Trial of new products was associated with greater odds of experiencing an unexpected high after controlling for age, gender, education, mental health status, current marijuana or hashish use, and mean amount of marijuana or hashish consumed in the past month (OR=2.13, p<0.001). Individuals who reported having used edibles had greater odds of experiencing an unexpected high, after controlling for the same set of variables (OR=1.56, p<0.05). CONCLUSION: People who try new marijuana or hashish products, or use edible marijuana or hashish products, are at greater risk for an unexpected high. It is possible that some negative outcomes associated with marijuana use and unexpected highs may be averted through a better understanding of how to use product packaging to communicate with consumers.

Systematic transition from description to prediction for the oxidation in packaged olive oil.

In this work, an oxidation predictive model was proposed, following a methodical consideration of the natural laws and principles that determine the phenomena occurring during the olive oil oxidation. A mathematical description was obtained via a road-map involving selected "food-packaging-environment" system descriptors. A straightforward transition from the phenomena description to the tool was also developed. For this work, oxidation of packed edible oil was tested against the developed methodology, as a characteristic exemplar to confirm and support it. In conclusion, the proposed, mathematically supported, methodology was proven to be highly appropriate and satisfactory for capturing the potential chemical-physical evolution of oxidation, and therefore, the effectiveness of the tool has been demonstrated for oxidation of edible olive oil.

Migration assessment and the 'threshold of toxicological concern' applied to the safe design of an acrylic adhesive for food-contact laminates.

The suitability of an acrylic adhesive used on food packaging was studied. Six potential migrants were identified using GC-MS and UPLC-QTOF. Five compounds were intentionally added (2-butoxyethanol and 2,4,7,9-tetramethyl-5-decyne-4,7-diol 10 (TMDD) and TMDD ethoxylates). One of the compounds identified as 2-(12-(methacryloyloxy) dodecyl)malonic acid was a non -intentionally added substance (NIAS), which could be a methyl metacrylate derivative. A migration study from multilayers containing paper-adhesive-film was carried out. The films used were polyethylene (PE), polypropylene, polyethylene terephthalate, polylactic acid (PLA) and Ecovio F2223®, which is a mixture of biodegradable polyester with PLA. All the non-volatile compounds, including the identified NIAS, migrated into the dry food simulant Tenax ®. Five surfactants based on TMDD were found to migrate from all laminates into Tenax at levels from 0.05 to 0.6 mg kg-1. The results showed that the lowest migration (0.01 mg kg-1 for 2-(12-(methacryloyloxy)dodecyl)malonic acid to 0.07 for TMDD mg kg-1) occurred when the compounds passed through PLA, demonstrating its functional barrier properties to these compounds. In contrast, PE showed the worst barrier properties to these compounds. To evaluate the migration results, the threshold of toxicological concern strategy was applied. The migration values of the surfactant identified were above 0.09 mg kg-1. Thus, it was decided to remove this surfactant from the formulation.

A Natural Component-Based Oxygen Indicator with In-Pack Activation for Intelligent Food Packaging.

Intelligent food packaging can provide consumers with reliable and correct information on the quality and safety of packaged foods. One of the key constituents in intelligent packaging is a colorimetric oxygen indicator, which is widely used to detect oxygen gas involved in food spoilage by means of a color change. Traditional oxygen indicators consisting of redox dyes and strong reducing agents have two major problems: they must be manufactured and stored under anaerobic conditions because air depletes the reductant, and their components are synthetic and toxic. To address both of these serious problems, we have developed a natural component-based oxygen indicator characterized by in-pack activation. The conventional oxygen indicator composed of synthetic and artificial components was redesigned using naturally occurring compounds (laccase, guaiacol, and cysteine). These natural components were physically separated into two compartments by a fragile barrier. Only when the barrier was broken were all of the components mixed and the function as an oxygen indicator was begun (i.e., in-pack activation). Depending on the component concentrations, the natural component-based oxygen indicator exhibited different response times and color differences. The rate of the color change was proportional to the oxygen concentration. This novel colorimetric oxygen indicator will contribute greatly to intelligent packaging for healthier and safer foods.

Análise microbiológica da superfície de latas de cerveja comercializadas em Itabuna - BA / Microbiological analysis of beer cans marketed in Itabuna - BA

A cerveja é uma bebida alcoólica comercializada frequentemente em latas de alumínio devido à praticidade no consumo. Este tipo de embalagem entra em contato direto com a boca do consumidor e necessita de um cuidado redobrado com relação aos aspectos de higienização para não ser um veículo de micro-organismos patogênicos. O trabalho objetivou avaliar a presença de micro-organismos aeróbios mesófilos e enterobactérias nas superfícies das latas de cerveja comercializadas no município de Itabuna, Bahia. Foram coletadas 48 latas de cerveja (24 com vendedores ambulantes e 24 em supermercados) no mês de setembro de 2012 e realizou-se a Técnica do Esfregaço de Superfície com plaqueamento do inóculo em profundidade nos meios de cultura PCA e VRBD. A presença dos micro-organismos aeróbios mesófilos foi determinada com contagens acima de 300 UFC/cm², em 70,8% e 12,5% das amostras coletadas com ambulantes e em supermercados, respectivamente. Já as enterobactérias tiveram presença acima de 300 UFC/cm² em 37,5% das amostras dos ambulantes e contagens abaixo de 50 UFC/cm² em 100% das amostras coletadas em supermercados. As altas contagens de micro-organismos aeróbios mesófilos e enterobactérias na superfície das latas coletadas com ambulantes indicaram a necessidade de boas práticas higiênicas na comercialização da bebida.

Beer is an alcoholic beverage often marketed in aluminum cans because of the convenience in use. This type of packaging is in direct contact with the consumer's mouth and needs a special care regarding the hygiene aspects not to be a vehicle of pathogenic microorganisms. The study aimed to evaluate the presence of mesophilic aerobic microorganisms and enterobacteria on the surfaces of cans of beer sold in the city of Itabuna, Bahia. They collected 48 cans of beer (24 with street vendors and 24 supermarkets) in September 2012 and held the surface smear technique with the plating of inoculum in depth in the PCA and VRBD culture media. The presence of mesophilic aerobic microorganisms was determined above 300 CFU / cm² counts in 70.8% and 12.5% of the samples collected from street and supermarkets, respectively. Enterobacteria already had presence above 300 CFU / cm² in 37.5% of samples of street and scores below 50 CFU / cm² at 100% of the samples collected in supermarkets. The high counts of mesophilic aerobic microorganisms and enterobacteria on the surface of cans collected with street indicated the need for good hygienic practices in the marketing of the drink.