The cutting-edge roles of lasers in endodontics: A bibliometric and scientometric analysis of the 100 most-cited articles.

PURPOSE: This bibliometric and scientometric analysis aimed to delve into the forefront roles of lasers in endodontics from 1990 to 2024. METHODS: A comprehensive electronic search was conducted using "Clarivate Analytics Web of Science, All Databases" to retrieve the most-cited articles pertaining to the topic. These articles were then ranked in descending order according to their citation counts and the top 100 were selected for further analysis. Parameters including citation density, publication year, journal, journal impact factor (IF), country, institution, author, study design, study field, evidence level, laser type, and keywords were meticulously analyzed. RESULTS: The mean and standard deviations of total citation and citation density were 106.47 ± 65.76 and 7.61 ± 5.13, respectively. Positive and negative correlations were found between the number of citations and citation density and age of publication. While the mean number of citations was significantly higher in the period 2001-2010 compared to the other periods (P < 0.05), values were similar between the periods 1990-2000 and 2011-2014 (P > 0.05). Articles were mainly published in the Journal of Endodontics. The most productive country, institutions, and author were the United States, the University of Showa, and Koukichi Matsumoto. Diode and Er: YAG lasers were commonly investigated. Ex vivo studies were mainly performed followed by in vitro ones. The main study field was "antimicrobial effect". Among keywords, "photodynamic therapy" was used more frequently. CONCLUSION: Lasers are predominantly utilized to leverage their antimicrobial efficacy. Advancements in technology will lead to improvements in the properties of lasers, thereby enhancing the disinfection of the root canal system.

Advancements in guided surgical endodontics: A scoping review of case report and case series and research implications.

This scoping review examined current case series and reports on guided surgical endodontic applications in order to provide a critical platform for future research. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) extension for scoping reviews guidelines were followed. A search on PubMed and Scopus yielded 611 articles, with 17 case reports and 1 series meeting inclusion criteria. Overall, guided surgery addressed anatomical complexities, with 15 articles employing static protocols and 3 dynamic. Results showed minimal iatrogenic errors and reduced chair time, with no postoperative issues reported. Within the cases described, guided endodontic surgery exhibited satisfactory results in management of anatomical complex cases. Cost-effectiveness, the need for adequate follow-up, procedure's reproducibility and accuracy, and objective measurement of the reduction in operative times and iatrogenic errors are some of the limitations in the current reports that need to be considered for planning of future experimental and cohort studies.

The extended finite element method in endodontics: A scoping review and future directions for cyclic fatigue testing of nickel-titanium instruments.

OBJECTIVES: The present study reviews the current literature regarding the utilization of the extended finite element method (XFEM) in clinical and experimental endodontic studies and the suitability of XFEM in the assessment of cyclic fatigue in rotary endodontic nickel-titanium (NiTi) instruments. MATERIAL AND METHODS: An electronic literature search was conducted using the appropriate search terms, and the titles and abstracts were screened for relevance. The search yielded 13 hits after duplicates were removed, and four studies met the inclusion criteria for review. RESULTS: No studies to date have utilized XFEM to study cyclic fatigue or crack propagation in rotary endodontic NiTi instruments. Challenges such as modelling material inputs and fatigue criteria could explain the lack of utilization of XFEM in the analysis of mechanical behavior in NiTi instruments. CONCLUSIONS: The review showed that XFEM was seldom employed in endodontic literature. Recent work suggests potential promise in using XFEM for modelling NiTi structures.

Cementoblastoma Mimicking Pathology of Endodontic Origin: A Case Report.

Interdisciplinary care in the management of complex pathology is critical to ensure patients receive predictable, evidence-based treatment. The authors report the unique case of a healthy 38-year-old female patient who presented to a private endodontics practice with a radiopaque lesion associated with the root of tooth No. 20. The patient experienced mild and occasional palpation tenderness associated with the tooth. Extraoral examination and intraoral soft tissues presented without any abnormalities. Intraoral radiographs revealed a radiopacity overlying the apex of tooth No. 20. A cone-beam computed tomography scan of the region revealed a well-delineated bulbous radiopaque lesion attached to the lingual aspect of the apical third of the root of tooth No. 20. The lesion could not be distinguished from the root outline and presented with a radiolucent halo along its periphery. The differential diagnosis at the time consisted of cementoblastoma, condensing osteitis, hypercementosis, and periapical cemento-osseous dysplasia. The patient was referred to an oral and maxillofacial surgeon for evaluation and treatment. Tooth No. 20 was subsequently treated with an excisional biopsy and concurrent extraction of the tooth. Histologic examination of the lesion supported the diagnosis of cementoblastoma.

Concordancia entre docentes de Endodoncia de facultades de odontología de la Argentina en la evaluación radiográfica de tratamientos endodónticos / Agreement in the radiographic evaluation of endodontic treatments among teachers from dental schools in Argentina

Objetivo: Analizar la concordancia entre docentes de diferentes cátedras de Endodoncia de facultades de odontolo- gía de universidades de la República Argentina en la evalua- ción radiográfica de tratamientos endodónticos realizados ex vivo por alumnos de grado. Materiales y métodos: Se envió a 13 docentes de diferentes cátedras de Endodoncia de facultades de odontolo- gía de universidades públicas y privadas de la República Ar- gentina un email que contenía 54 tratamientos endodónticos realizados por alumnos de grado en dientes ex vivo para su evaluación radiográfica. Para uniformar la muestra, se selec- cionaron la mitad como correctos y la otra mitad incorrectos. Se solicitó a cada docente que determine cada tratamiento como correcto o incorrecto, sin ninguna rúbrica o pauta pre- via. Se obtuvieron 13 respuestas que fueron incluidas en una planilla Excel. La evaluación estadística fue realizada tenien- do en consideración el índice de concordancia expresado por el coeficiente de kappa. Resultados: El valor registrado para el índice kappa fue 0,28, con un intervalo de confianza de (95%) 0,20 - 0,37 (p<0,001). Conclusiones: Puede considerarse que existe un nivel de concordancia aceptable con tendencia a leve entre los par- ticipantes del estudio (AU))

Aim: To analize the agreement between teachers from different departments of Endodontics from dentistry faculties of universities in the Argentine Republic in the radiographic evaluation of endodontic treatments performed ex vivo by un- dergraduate students. Materials and methods: An email containing 54 endo- dontic treatments performed by undergraduate students on ex vivo teeth for radiographic evaluation was sent to 13 profes- sors from different Endodontic departments of dental faculties of public and private universities in the Argentine Republic. To standardize the sample, half were selected as correct and the other half as incorrect. Each teacher was asked to deter- mine each treatment as correct or incorrect, without any prior rubric or guideline. 13 responses were obtained that were in- cluded in an Excel spreadsheet. The statistical evaluation was carried out taking into consideration the concordance index expressed by kappa's coefficient. Results: The value recorded for the kappa index was 0.28, with a confidence interval of (95%) 0.20 - 0.37 (p<0.001). Conclusions: It can be considered that there is an ac- ceptable level of agreement with a tendency towards slight agreement among the study participants (AU)

Self-reported preparedness of final year undergraduate dental students and interns in Saudi Arabia: a multi-institutional study.

BACKGROUND: Contemporary undergraduate dental education aims to equip the dental students with clinical competence, empathy, and professionalism to enable them to deliver safe and effective dental care to the communities. The purpose of this study was to assess the self-reported preparedness of final year dental students and interns at three Saudi dental institutions, using the pre-validated Dental Undergraduates Preparedness Assessment Scale (DU-PAS). METHODS: A cross-sectional study design was employed to assess the self-reported preparedness of the participants using the DU-PAS. Following ethics approval, a probability sampling technique was used to recruit undergraduate dental students and interns from three dental institutions in Saudi Arabia. The data was collected online on Google Forms and all participants provided their consent to participate in the study prior to providing their responses to DU-PAS. RESULTS: Responses were received from 397 participants including 171 males and 226 females yielding a response rate of 60.3%. The total mean score of the participants was 81.85 ± 13.11. Although higher scores were reported in males, the interaction between gender and DU-PAS scores were not significant. Interaction between DU-PAS scores and stage of education showed significant effect of the stage of education with interns reporting higher overall scores. The participants reported that they were able to perform most clinical procedures independently. However, low confidence was reported in performing multi-rooted endodontics, fabrication of removable dentures and orthodontic assessment. The participants also expressed their confidence in a wide range of behavioural attributes related to communication, teamworking and professionalism. However, lack of experience was noted in referral for oral cancer, interpreting research, and evaluation of new dental products using an evidence-based approach. CONCLUSION: The study provides useful insights into the self-reported preparedness of undergraduate dental students and interns in three dental institutions. While the overall preparedness of the participants was comparable to their international peers, the findings underscore the need for further enhancements to the teaching and training of undergraduate students particularly in multirooted endodontics, removable prosthodontics and orthodontics.

Evaluation of a Novel Drilling Approach for Dynamic Navigation-Aided Endodontic Microsurgery: A Surgical Simulation Comparison Study.

INTRODUCTION: This study investigated the feasibility of a novel drilling approach that integrates a pilot trephine into dynamic navigation (DN) for guided osteotomy and root-end resection (RER) with unimanual operation in endodontic microsurgery. METHODS: Two operators with varying levels of DN experience performed guided osteotomy and RER using 2 unimanual drilling methods with DN-aided operation on 3-dimensional printed jaw models. Method 1 (M1) involved drilling with a conventional trephine. Method 2 (M2) involved drilling with a pilot trephine, followed by drilling with a conventional trephine. Accuracy, time, and safety of M1 and M2 were compared. Accuracy measurements included platform deviation (PD), end deviation (ED), angular deviation (AD), resection length deviation (RLD), and resection bevel angle (RBA). Additional parameters included osteotomy and RER time (OT) and bur slippage number (BSN). Statistical analyses were conducted using a 2-sample t-test or Mann-Whitney U test, with the significance level set at .05. RESULTS: The PD, AD, RBA, and BSN in the M2 group were significantly less than in the M1 group (P < .05). For M1, the novice operator (NO) exhibited significantly higher values of PD, ED, OT, and BSN than the experienced operator (EO) (P < .05). For M2, the NO exhibited significantly higher value of ED only (P < .05), and drilling depth >7 mm was significantly associated with a longer OT (P < .05). CONCLUSION: In this surgical simulation comparison study, the incorporation of a pilot drill improved the accuracy and safety of DN-aided endodontic microsurgery.

Avaliação da instrumentação reciprocante no tratamento endodôntico de molares decíduos / Evaluation of reciprocating instrumentation in endodontic treatment of primary molars

Esta pesquisa teve como objetivo investigar o uso de duas técnicas de instrumentação do canal radicular no tratamento endodôntico de molares decíduos. As técnicas aplicadas foram instrumentação manual convencional, com o uso de limas K manuais de aço inoxidável, e instrumentação reciprocante, um tipo de instrumentação mecanizada que aplica instrumentos acionados a motor introduzidos no canal enquanto realizam movimentos de rotação alternada. Assim, foi realizado um ensaio clínico randomizado com acompanhamento de 24 meses, comparando os resultados obtidos com as duas técnicas. Esta tese é composta por dois estudos relacionados ao tema principal: (I) um ensaio clínico randomizado (ECR) com 24 meses de acompanhamento avaliando o sucesso do tratamento endodôntico, (II) um estudo aninhado no ECR avaliando fatores associados ao tempo de instrumentação, desconforto e dor pós-operatória no tratamento endodôntico de molares decíduos. O principal objetivo do ECR (I) foi comparar a taxa de sucesso da instrumentação reciprocante à instrumentação manual convencional no tratamento endodôntico de molares decíduos após 24 meses. Como desfecho primário, o sucesso do tratamento após 24 meses foi avaliado por exame clínico e radiográfico. Outros desfechos secundários também foram analisados, tais como: tempo de instrumentação, qualidade da obturação, desconforto após o tratamento e dor pósoperatória. O estudo aninhado ao ECR (II) teve como objetivo analisar os dados disponíveis do ECR observando uma possível associação entre a técnica de instrumentação e outras variáveis (relacionadas às crianças e aos dentes), no tempo de instrumentação e na ocorrência de dor pós-operatória no tratamento endodôntico de molares decíduos. Como resultados principais, observou-se que ambas as técnicas forneceram resultados semelhantes quanto à taxa de sucesso do tratamento endodôntico após 24 meses de acompanhamento. Não foi observada diferença estatisticamente significante entre as técnicas. Também foi observado que, na dentição decídua, o tipo de técnica de instrumentação aplicada influencia no tempo de instrumentação; por outro lado, não parece estar relacionado à ocorrência de dor pós-operatória. Em conclusão, não há diferenças em termos de sucesso no tratamento endodôntico de molares decíduos instrumentados pela técnica manual ou reciprocante.

Effect of Laser Photobiomodulation on Postoperative Pain in Endodontics: A Systematic Review.

Objective: Photobiomodulation therapy has proven benefits in various dental treatments. The current systematic review aims to explore the role of laser photobiomodulation in modulating postoperative pain followed by endodontic treatment. Methods: In this systematic review, randomized controlled clinical trials on low-level laser therapy/photobiomodulation in endodontic therapy were analyzed. Database search was performed in PubMed/Medline, Web of Science, Scopus, and Cochrane Library, followed by literature search in Google Scholar. Results: A total of 12 studies were included as per the set criteria. The included studies utilized diode laser (808-970 nm) and indium gallium aluminum. All the included studies evaluated postendodontic pain after root canal therapy and endodontic surgery. A majority of the included studies showed significant benefits of photobiomodulation in postoperative pain management in endodontic therapy.Heterogeneity of the laser parameters and lack of power calculations for sampling among the included studies preclude solid recommendation of use of photobiomodulation therapy (PBMT) for postendodontic pain management. Conclusions: Although PBMT has proven potential benefits being a possible adjunct in postoperative pain management in endodontic therapy, it requires robust standardized randomized control trials to confirm the results of the systematic review.

Robot-Assisted and Haptic-Guided Endodontic Surgery: A Case Report.

There has been a significant increase in robot-assisted dental procedures in the past decade, particularly in the area of robot-assisted implant placement. The objective of this case report was to assess the initial use of the Yomi Robot's assistance and haptic guidance during endodontic microsurgery. The robot was used during the osteotomy and root-end resection of the first and second upper left premolars. The report aims to inform clinicians of the initial implementation of this cutting-edge technology in endodontics and its potential to enhance endodontic microsurgery. The Yomi Robot was used in performing osteotomy and root-end resection during apical surgery in a patient presenting with symptomatic upper left first and second premolars. The treatment procedure was decided after clinical examination, chart data, and radiographic examinations, which showed periapical lesions on both premolars, taking into consideration the failed endodontic retreatment on the first premolar, the post and ceramic coronal restorations on both teeth, and the desire of the patient to save them. The Yomi Robot system provides auditory, visual, and physical guidance to clinicians during surgery while using a cone-beam computed tomography scan for precision planning with greater accuracy and minimized potential for human error. Further studies are needed to prepare a protocol for robotic-guided procedures in endodontics.

Comparative in vitro analysis of the antifungal activity of different calcium silicate-based endodontic sealers

Aim: This study aimed to perform an in vitro comparative analysis of the antifungal activity of different calcium silicate-based endodontic sealers against three fungal species. Methods: The antifungal properties of three calcium silicate-based sealers were tested: Bio-C Sealer, Cambiar a Sealer Plus BC, and MTA-Fillapex. Two commonly used sealers were used as controls: AH Plus and Endomethasone. An agar diffusion test was performed to analyze the antifungal activity of the sealers against Candida albicans, Candida glabrata, Candida tropicalis, and a mixed microbial culture medium. The results were analyzed using ANOVA (p <0.05). Results: Endomethasone exhibited the highest inhibition against all strains examined, maintaining a consistent level of inhibition throughout 7 days. MTA-Fillapex demonstrated the best performance among the calcium silicate-based sealers for the three fungal species (p < 0.05), maintaining stable values over the 7 days, surpassing that of Endomethasone. Nevertheless, MTA-Fillapex only exhibited antimicrobial effect against the mixed culture for the first 24 hours, and no antimicrobial activity was observed at 48 hours, being surpassed by all tested sealers (p < 0.05). Conclusion: Of all silicate-based sealers tested, only MTA-Fillapex exhibited promising antifungal activity. Nevertheless, care must be taken when extrapolating these results, as MTA-Fillapex exhibited poor antimicrobial activity when tested in mixed microbial cultures

Accuracy of Working Length Determination - Electronic Apex Locator Versus Cone Beam Computed Tomography

ABSTRACT Objective: To compare the accuracy of working length determination between cone beam computed tomography (CBCT) and electronic apex locator by measuring the actual working length of teeth. Material and Methods: A total of 150 single-rooted tooth assessed by radiograph undergoing root canal therapy were selected. The process was repeated to obtain a buccolingual and mesiodistal section of all teeth. The measurement line was considered from the reference occlusal plane following the center of the canal to the terminus. All information regarding the accuracy of cone-beam computed tomography and apex locator was noted in a pre-designed proforma. Results: CBCT consistently demonstrated high accuracy across all tooth types in both jaws. The electronic apex locator exhibited varying precision, with greater accuracy observed in the mandible. Statistical analyses revealed significant differences in electronic apex locator accuracy among tooth types in the maxilla (p=0.042), emphasizing the importance of specific clinical considerations. Conclusion: Cone beam computed tomography emerges as a reliable diagnostic tool for accurate working length determination, especially in complex cases, while the electronic apex locator remains valuable with careful consideration of potential variations in accuracy. An individualized approach, considering tooth type, jaw location, and clinical context, is crucial for precise working length determination in endodontic practice.

Accuracy of the integrated electronic apex locator in locating simulated perforation under various irrigating solutions in an in vitro study

Aim: This study's objective was to assess the accuracy of the integrated apex locator in identifying artificial root canal perforations in the presence of saline, chlorhexidine, sodium hypochlorite, QMix, and MTAD. Methods: The root canals of 60 single-rooted extracted human teeth were perforated artificially at a point 10 mm away from the root apex. After measuring the actual lengths up to the perforation point, the teeth were then put within an alginate mould for measurements using an integrated apex locator. Using a #20 K-file in the presence of NaCl, CHX, MTAD, NaOCl, and QMix, an electronic apex locator was used to measure the perforations electronically in accordance with the manufacturer's instructions. Between the measurements, each canal was dried with paper points after being irrigated with distilled water. The accuracy of all the readings was calculated at ± 0.5 mm. Statistical analyses were performed using the Z-test. Results: In comparison to the MTAD, NaOCl, and Qmix, saline and chlorhexidine scored more readings in the ± 0.5 mm range of the perforation site, and the difference was statistically significant. Conclusion: The most precise electronic measurements of artificial perforation were obtained in the presence of chlorhexidine or saline

Physico-Chemical comparison of four commercially available mineral trioxide aggregates / Comparación fisicoquímica de cuatro mineral trióxido agregados disponibles comercialmente

Abstract To compare the physicochemical composition of 4 MTAs commercially available in Latin America. ProRoot MTA (Dentsply, USA), MTA Angelus (Angelus, Brazil), MTA Flow (Ultradent, USA), and MTA Viarden (Viarden, Mexico) were physically and chemically compared. Scanning electron microscopy (SEM) images were obtained from the MTA powder and the prepared presentations. Energy Dispersive X-Ray Spectroscopy (EDS) analyses were performed by triplicate, to calculate the mass proportion of calcium (Ca), silicon (Si), the Ca/Si proportion among the 4 brands. Thermogravimetric analyses (TGA) were conducted (50ºC-1000ºC), and mass loss and inflection points were calculated for each material. Statistical differences for Ca and Si content were determined by ANOVA (p<0.05). SEM images showed evident differences in the appearance of both the powder and the prepared MTAs among brands. Angelus MTA showed cubic prisms not observed in the other 3 brands. ProRoot MTA and MTA Flow showed similar homogeneous structures. MTA Viarden was the less homogeneous, with random structures (>15um). When comparing the mass proportions of Ca and Si between the 4 powder samples, MTA Viarden showed a significantly lower proportions of both elements when compared with the other brands (p<0.005). TGA análisis showed a similar behavior for ProRoot MTA, MTA Angelus and MTA Flow, with less than 2% mass loss when the 1000C temperature was reached. MTA Viarden showed a mass loss of 9,94% before the 700C, indicating the presence of different content sensible to temperature degradation. The analyzed MTAs demonstrated to vary significantly in their chemical composition and physical characteristics. Clinicians must be aware of the differences between different brands of a same material, and future research should focus on the clinical implications of these differences.

Resumen Comparar la composición fisicoquímica de 4 MTA disponibles comercialmente en América Latina. Se compararon física y químicamente ProRoot MTA (Dentsply, EE. UU.), MTA Angelus (Angelus, Brasil), MTA Flow (Ultradent, EE. UU.) y MTA Viarden (Viarden, México). Se obtuvieron imágenes de microscopía electrónica de barrido (SEM) del polvo de MTA y de las presentaciones preparadas. Los análisis de espectroscopía de dispersión de energía de rayos X (EDS) se realizaron por triplicado para calcular la proporción de masa de calcio (Ca), silicio (Si), la proporción Ca/Si entre las 4 marcas. Se realizaron análisis termogravimétricos (TGA) (50ºC-1000ºC), y se calcularon las pérdidas de masa y los puntos de inflexión para cada material. Las diferencias estadísticas para el contenido de Ca y Si se determinaron mediante ANOVA (p<0,05). Los análisis SEM mostraron diferencias evidentes en la apariencia tanto del polvo como las preparaciones de los MTA, entre las diferentes marcas. MTA Angelus mostró prismas cúbicos no observados en las otras 3 marcas. ProRoot MTA y MTA Flow mostraron estructuras homogéneas similares. MTA Viarden fue el menos homogéneo, con estructuras aleatorias (>15um). Al comparar las proporciones de masa de Ca y Si entre las 4 muestras de polvo, MTA Viarden mostró proporciones significativamente más bajas de ambos elementos en comparación con las otras marcas (p<0,005). El análisis TGA mostró un comportamiento similar para ProRoot MTA, MTA Angelus y MTA Flow, con menos del 2 % de pérdida de masa al alcanzar los 1000 °C de temperatura. El MTA Viarden mostró una pérdida de masa de 9,94% antes de los 700 °C, indicando la presencia de diferentes contenidos sensibles a la degradación por temperatura. Los MTA analizados demostraron diferencias significativas en su composición química y características físicas. Los clínicos deben ser conscientes de las diferencias entre las diferentes marcas de un mismo material, y futuras investigaciones deben enfocarse en las implicaciones clínicas de estas diferencias.

Acidente de hipoclorito de sódio durante retratamento endodôntico / Sodium hypochlorite accident during endodontic retreatment / Accidente con hipoclorito de sodio durante retratamiento

O retratamento endodôntico é uma intervenção executada em um dente que já apresenta um tratamento realizado anteriormente que foi mal sucedido clínica e/ou radiograficamente. O objetivo deste trabalho foi o de relatar um caso de retratamento endodôntico na clínica de Atenção Básica III da Faculdade de Odontologia de Pernambuco devido ao desconforto estético do incisivo lateral superior que estava fraturado e necessitando de prótese fixa. Após anamnese, exames extra e intra-oral e exames radiográficos, constatou-se o canal do dente 12 havia sido tratado endodonticamente há aproximadamente quatro anos. A remoção da gutta percha contaminada foi realizada com as limas rotatórias EasyLogic RT® 25mm sequência 30.10 torque 4N e 900 RPM, 25.08 torque 4Ne 900 RPM. Após remoção da guta-percha, realizou-se o protocolo de irrigação com solução de hipoclorito de sódio a 2,5% (Biodinâmic). A odontometria foi realizada com localizador apical e confirmada por radiografia periapical e o repreparo do canal radicular confeccionado com a Lima EasyLogic 2® de número 35.06 e posterior irrigação com a solução de Labarraque. Nesse momento, o paciente relatou dor e após aspiração com sugador endodôntico, notou-se sangramento abundante, correspondendo ao extravasamento do hipoclorito de sódio (Enfizema por hipoclorito de sódio. O paciente foi medicado com Amoxacilina 875mg de 12 em 12 horas durante sete dias, Predisin 20mg ­ Corticóide - um comprimido pela manhã por 4 dias e Nimesulida 100mg de 12 em 12 horas durante 5 dias. Após 24 horas o paciente não relatou dor nem edema. Na segunda sessão, 10 dias após o acidente, a obturação foi realizada com cone único de guta-percha 35.06 HBassi (Easy, associado ao cimento Bio C Sealer Fillapex (Angelus®). Concluiu-se que a conduta terapêutica imediata instituída para este caso, foi efetiva para o controle da dor e prevenção de complicações adicionais após injeção acidental de hipoclorito de sódio.

Endodontic retreatment is an intervention performed on a tooth that already has a previously performed treatment that was clinically and/ or radiographically unsuccessful. The objective of this study was to report a case of endodontic retreatment at the Primary Care Clinic III of the Faculty of Dentistry of Pernambuco due to the aesthetic discomfort of the maxillary lateral incisor that was fractured and required a fixed prosthesis. After anamnesis, extra and intraoral exams and radiographic exams, it was found that the root canal of tooth 12 had been endodontically treated for approximately four years. Removal of contaminated gutta percha with those performed with EasyLogic RT® 25mm rotary files sequence 30.10 torque 4N and 900 RPM, 25.08 torque 4N and 900 RPM. After removing the gutta-percha, the irrigation protocol was performed with a 2.5% sodium hypochlorite solution (Biodynamic). Odontometry was performed with an apex locator and confirmed by periapical radiography and root canal re-preparation made with EasyLogic 2® File number 35.06 and subsequent irrigation with Labarraque's solution. At that moment, the patient reported pain and after aspiration with an endodontic sucker, there was profuse bleeding, corresponding to sodium hypochlorite extravasation (Sodium hypochlorite emphysema. The patient was medicated with Amoxicillin 875mg every 12 hours for seven days, Predisin 20mg - Corticosteroid - one tablet in the morning for 4 days and Nimesulide 100mg every 12 hours for 5 days. After 24 hours the patient did not report pain or swelling. In the second session, 10 days after the accident, the filling was performed with a single cone of gutta-percha 35.06 HBassi (Easy, associated with Bio C Sealer Fillapex cement (Angelus®). It was concluded that the immediate therapeutic approach instituted for this case was effective for pain control and prevention of complications. additional doses after accidental injection of sodium hypochlorite.

El retratamiento endodóntico es una intervención que se realiza sobre un diente que ya tiene un tratamiento realizado previamente que resultó clínica y/o radiográficamente fallido. El objetivo de este estudio fue relatar un caso de retratamiento endodóntico en la Clínica de Atención Básica III de la Facultad de Odontología de Pernambuco debido a la incomodidad estética del incisivo lateral maxilar que estaba fracturado y requirió prótesis fija. Después de anamnesis, exámenes extraorales, intraorales y exámenes radiográficos, se encontró que el conducto radicular del diente 12 había sido tratado endodónticamente durante aproximadamente cuatro años. Eliminación de gutapercha contaminada con las realizadas con limas rotatorias EasyLogic RT® 25mm secuencia 30.10 torque 4N y 900 RPM, 25.08 torque 4N y 900 RPM. Tras retirar la gutapercha, se realizó el protocolo de irrigación con una solución de hipoclorito de sodio al 2,5% (Biodynamic). Se realizó odontometría con localizador de ápices y se confirmó mediante radiografía periapical y repreparación del conducto radicular realizada con EasyLogic 2® File número 35.06 y posterior irrigación con solución de Labarraque. En ese momento el paciente refirió dolor y luego de aspiración con ventosa endodóntica presentó sangrado profuso, correspondiente a extravasación de hipoclorito de sodio (Enfisema por hipoclorito de sodio. El paciente fue medicado con Amoxicilina 875mg cada 12 horas por siete días. Predisin 20mg - Corticosteroide - una tableta por la mañana por 4 días y Nimesulida 100mg cada 12 horas por 5 días, luego de 24 horas el paciente no refirió dolor ni hinchazón, en la segunda sesión, 10 días después del accidente, se realizó el relleno con un solo cono de gutapercha 35.06 HBassi (Easy, asociado al cemento Bio C Sealer Fillapex (Angelus®). Se concluyó que el abordaje terapéutico inmediato instituido para este caso fue eficaz para el control del dolor y la prevención de complicaciones. dosis adicionales después de accidente inyección de hipoclorito de sodio.

Evaluación de hábitos de medicación sistémica de odontólogos especialistas y no especialistas en endodoncia ante patologías pulpares en Argentina / Evaluation of systemic medication habits of specialists and non-specialists dentists in endodontists in relation to different pulp pathologies in Argentina

Objetivo: Determinar los hábitos de medicación sistémica de odontólogos especialistas y no especialistas en endodoncia ante diferentes patologías pulpares previos al tratamiento en- dodóntico en Argentina. Materiales y métodos: Se diseñó una encuesta para evaluar la prescripción de antibióticos, tipo de antibióticos, tiempo de prescripción, indicación de antinflamatorios no es- teroides y esteroides ante diferentes patologías pulpares. Se envió a 635 odontólogos especialistas y no especialistas en endodoncia a través de SurveyMonkey. Por medio de la prue- ba de Chi cuadrado se evaluaron las diferencias de medica- ción entre los grupos estudiados. Resultados: En pulpitis se medicó con antibióticos en el 3,48% de los casos y con antinflamatorios en un 62,60%. En necrosis pulpar sin fístula no se indicó ninguna medica- ción en un 64,47% de los casos, seguido de antibióticos en un 24,56%. En necrosis con fístula, el 52,38% no indicó nin- guna medicación, seguido de medicación con antibióticos en un 35,49%. En periodontitis apical aguda la principal medica- ción fue con antinflamatorios (52,79%), seguido de antibió- ticos (32,87%); y en el absceso alveolar agudo, un 57,10% indicó antibióticos seguido de antinflamatorios. El antibiótico de elección fue la penicilina en un 65,23% de los casos, y en caso de alergia a la misma, el antibiótico elegido fue azitromi- cina (30,12%). El tiempo de prescripción fue de 7 días. En la comparación entre especialistas y no especialistas hubo dife- rencias estadísticamente significativas para pulpitis y necrosis con fístula (p<0,01) y no las hubo entre necrosis sin fístula, periodontitis apical aguda y absceso alveolar agudo (p> 0,05). Conclusiones: La penicilina fue el antibiótico de elec- ción de la mayoría de los odontólogos argentinos encuestados junto al ibuprofeno como anti-inflamatorio. Existiría una so- bremedicación en patologías endodónticas que podría contri- buir a la resistencia microbiana a los antibióticos (AU)

Aim: Determine the systemic medication habits of den- tists specialists and non-specialists in endodontists in differ- ent pulp pathologies prior to root canal treatment in Argen- tina. Materials and methods: A survey was designed to evaluate the prescription of antibiotics, the type of antibiotics, prescription time, indication of non-steroidal anti-inflamma- tory drugs in different pulp pathologies. It was sent to 635 general dentists and endodontic specialists via SurveyMon- key. A Chi-square test was made to evaluate the differences in medication between the studied groups. Results: In pulpitis, antibiotics were prescribed in 3.48% of cases and anti-inflammatories in 62.60%. In pul- pal necrosis without fistula, no medication was indicated in 64.47% of cases, followed by antibiotics in 24.56%. In ne- crosis with fistula, 52.38% did not indicate any medication, followed by medication with antibiotics in 35.49%. In acute apical periodontitis the main medication was anti-inflamma-tories (52.79%), followed by antibiotics (32.87%); and for acute alveolar abscess, 57.10% indicated antibiotics, fol- lowed by anti-inflammatories. The antibiotic of choice was penicillin in 65.23% of the cases, and in case of allergy to it, the chosen antibiotic was azithromycin (30.12%). The prescription time was 7 days. In the comparison between specialists and non-specialists, there were significant dif- ferences for pulpitis and necrosis with fistula (p<0.01) and there were no significant differences between necrosis without fistula, acute apical periodontitis and acute alveo- lar abscess (p>0.05). Conclusions: Penicillin was the antibiotic of choice for the majority of the surveyed Argentine dentists, as well as ibuprofen as an anti-inflammatory drug. These could reflect an overmedication in endodontics pathologies that could con- tribute to microbial resistance to antibiotics (AU)

Analysis of the Internal and External Morphology of the Mandibular First Molar in a Chilean Sub-Population Using Cone-Beam Computed Tomography / Análisis de la Morfología Interna y Externa del Primer Molar Mandibular en una Subpoblación Chilena Mediante Tomografía Computarizada de Haz Cónico

SUMMARY: The mandibular first molar (MFM) commonly presents two roots with two canals in the mesial root and one or two canals in the distal root. However, morphological variations have been described in different populations, which must be considered when planning endodontic treatment. The aim of this study was to analyze the internal and external morphology of the MFM in a Chilean sub-population using cone-beam computed tomography (CBCT) images. An in vivo cross-sectional, descriptive, and observational study was conducted using CBCT exams from 351 right and left MFM. The data were analyzed by descriptive statistics using the Chi- Square test for categorical variables, Fisher's exact test, the Mann-Whitney U non-parametric test for two independent samples, and the Wilcoxon non-parametric test for related samples. Of the total sample, 1 root was observed in 2.27 % of the cases, 2 roots in 93.73 %, and 3 roots in 4 %. In relation to the number of canals, 71.23 % of the MFM showed 3 root canals, 16.81 % 4 canals, 9.69 % 2 canals, and 2.28 % 1 canal. Of all the studied cases, 2.3 % had a C-shaped anatomy. In terms of morphology, using Zhang's classification, variant 3 was observed in 71.23 %, variant 4 in 12.82 %, variant 1 in 9.67 %, variant 6 in 4 %, and variant 8 in 2.28 %. In conclusion, the morphology of the MFM is variable in a Chilean sub-population, and these variations must be considered before and during endodontic therapy. CBCT proved to be an effective tool for the in vivo study of tooth morphology.

El primer molar mandibular (MFM) comúnmente presenta dos raíces con dos canales en la raíz mesial y uno o dos canales en la raíz distal. Sin embargo, se han descrito variaciones morfológicas en distintas poblaciones, las que se deben tener en consideración al momento de planificar el tratamiento endodóntico. El objetivo de este estudio fue analizar la morfología interna y externa del MFM en una sub población chilena mediante el uso de imágenes de tomografía computarizada Cone Beam (CBCT). Se realizó un estudio transversal, descriptivo y observacional in vivo empleando exámenes CBCT de 351 MFM tanto derechos como izquierdos. Los datos se analizaron mediante estadística descriptiva empleando la prueba Chi-Cuadrado para variables categóricas, el test exacto de Fisher, la prueba no paramétrica de U-Mann-Whitney para dos muestras independientes y la prueba no paramétrica de Wilcoxon para muestras relacionadas. Del total de la muestra se observó 1 raíz en un 2.27 % de los casos, 2 raíces en 93.73 % y 3 raíces en un 4 %. En relación al número de canales un 71.23 % de los MFM mostraron 3 canales radiculares, un 16.81 % 4 canales, un 9.69 % 2 canales y un 2.28 % 1 canal. Del total de los casos estudiados un 2.3 % se presentó anatomía en forma de C. En relación a la morfología, empleando la clasificación de Zhang, se observó en un 71.23 % la variante tipo 3, en un 12.82 % la variante tipo 4, en un 9.67 % la variante tipo 1, en un 4 % variante tipo 6 y en un 2,28 % variante tipo 8. En conclusión, la morfología del MFM es variable en una subpoblación chilena y estas variaciones deben ser consideradas antes y durante la terapia endodóntica. El CBCT demostró ser una herramienta eficaz para el estudio in vivo de la morfología dentaria.

Gerenciamento de urgências endodônticas: conhecimentos de acadêmicos de odontologia / Management of endodontic emergencies: knowledge of dental students

Objetivo: avaliar do conhecimento dos alunos de odontologia sobre os protocolos de atendimento para as urgências endodônticas. Método: 182 alunos dos últimos anos do curso de Odontologia do Centro Universitário Doutor Leão Sampaio, responderam a um questionário contendo perguntas referente ao protocolo adotado em casos de urgência de origem endodôntica. Os dados foram analisados pelo teste de Qui-quadrado de Pearson (p<0,05). Resultados: foram observadas diferenças entre a conduta relata pelos alunos do quarto e quinto ano de graduação quanto a indicação da incisão para drenagem em abscesso periapical agudo submucoso (evoluído), indicação de antibióticos nos casos de flare-up e indicação de antibióticos na dor com edema póstratamento endodôntico. A prescrição de antibióticos foi excessiva para os casos de dor entre consultas (flareup) e dor no pós-operatória. Para as patologias da polpa, a maioria dos alunos indicou protocolos de urgência recomendados na literatura. Conclusão: os resultados indicam a necessidade de melhoria dos programas de treinamento dos alunos em urgências endodônticas, principalmente quanto aos protocolos farmacológicos. (AU)

Objective: to evaluate the knowledge of dentistry students about care protocols for endodontic emergencies. Method: 182 students from the last years of the Dentistry course at Doctor Leão Sampaio University Center answered a questionnaire containing questions regarding the protocol adopted in urgent cases of endodontic origin. Data were analyzed using Pearson's Chi-square test (p<0.05). Results: differences were observed between the conduct reported by fourth- and fifth-year undergraduate students regarding the indication of incision for drainage in submucosal acute periapical abscess (evolved), indication of antibiotics in cases of flare-up and indication of antibiotics in pain with edema after endodontic treatment. The prescription of antibiotics was excessive for cases of pain between appointments (flare-up) and postoperative pain. For pulp pathologies, most students indicated emergency protocols recommended in the literature. Conclusion: the results indicate the need to improve student training programs in endodontic emergencies, especially regarding pharmacological protocols. (AU)

Resistencia a la fractura de premolares superiores con tratamientos de endodoncia por accesos conservador y tradicional / Resistance to Fracture of Upper Premolars with Endodontic Treatment by Conservative and Traditional Access

Introducción: Las piezas dentarias luego de tratamiento de endodoncia aumentan su susceptibilidad a la fractura, lo que está asociado, principalmente, con la pérdida de la estructura dental. Objetivo: Evaluar in vitro, la resistencia a la fractura de premolares superiores con tratamientos de endodoncia mediante acceso tradicional, conservador y conservador Ninja, con restauración provisoria y final. Métodos: Estudio prospectivo de diseño experimental longitudinal con 42 premolares superiores donados, separados en 3 grupos según el tipo de acceso de endodoncia a aplicarse y luego cada uno en dos subgrupos según el tipo de restauración, y un grupo control, al cual no se le realiza endodoncia. Luego de realizar el tratamiento y la restauración, se evaluó la resistencia a la fractura mediante carga compresiva oblicua (45°), en una máquina de carga universal. Las cargas requeridas para la fractura se registraron en newtons y fueron comparadas estadísticamente. Resultados: Las piezas tratadas mediante acceso conservador Ninja con restauración provisoria y final, requirieron una carga promedio para la fractura de 513,45 N y 638,13 N, respectivamente. Fuerzas significativamente mayores a las resistencias ofrecidas por los otros tratamientos con p 0,05. Conclusiones: En la endodoncia in vitro, el diseño del acceso a la cavidad, tipo conservador Ninja, afectó significativamente la resistencia a la fractura de los premolares superiores, adquiriendo un comportamiento biomecánico similar al de las piezas control(AU)

Introduction: Tooth pieces, after endodontic treatment, increase their susceptibility to fracture, a phenomenon mainly associated with loss of tooth structure. Objective: To evaluate, in vitro, the resistance to fracture of upper premolars with endodontic treatment by traditional, conservative and conservative ninja access, with temporary and final restoration. Methods: A prospective study of longitudinal experimental design was carried out with 42 donated upper premolars, separated into three groups, according to the type of endodontic access to be applied; in turn, each was then divided into two subgroups, according to the type of restoration, and a control group, not performed endodontic treatment. After treatment and restoration, fracture resistance was evaluated using oblique compressive loading (45°) in a universal loading machine. The loads required for fracture were recorded in newtons and statistically compared. Results: The parts treated by conservative ninja access with provisional and final restoration required an average fracture load of 513.45 N and 638.13 N, respectively; this forces were significantly higher than the resistance values offered by the other treatments, with p < 0.05. Likewise, there were no significant differences in the resistance values obtained between the cases of conservative access and traditional access, nor when comparing the types of applied restoration, with P<0.05. Conclusions: In in vitro endodontics, the design of the access to the cavity of conservative ninja type significantly affected the resistance to fracture of the upper premolars, acquiring a biomechanical behavior similar to that of the control pieces(AU)